diff options
Diffstat (limited to 'arch/sparc/include/asm/ross.h')
| -rw-r--r-- | arch/sparc/include/asm/ross.h | 191 |
1 files changed, 191 insertions, 0 deletions
diff --git a/arch/sparc/include/asm/ross.h b/arch/sparc/include/asm/ross.h new file mode 100644 index 000000000..ecb6e8178 --- /dev/null +++ b/arch/sparc/include/asm/ross.h @@ -0,0 +1,191 @@ +/* + * ross.h: Ross module specific definitions and defines. + * + * Copyright (C) 1995 David S. Miller (davem@caip.rutgers.edu) + */ + +#ifndef _SPARC_ROSS_H +#define _SPARC_ROSS_H + +#include <asm/asi.h> +#include <asm/page.h> + +/* Ross made Hypersparcs have a %psr 'impl' field of '0001'. The 'vers' + * field has '1111'. + */ + +/* The MMU control register fields on the HyperSparc. + * + * ----------------------------------------------------------------- + * |implvers| RSV |CWR|SE|WBE| MID |BM| C|CS|MR|CM|RSV|CE|RSV|NF|ME| + * ----------------------------------------------------------------- + * 31 24 23-22 21 20 19 18-15 14 13 12 11 10 9 8 7-2 1 0 + * + * Phew, lots of fields there ;-) + * + * CWR: Cache Wrapping Enabled, if one cache wrapping is on. + * SE: Snoop Enable, turns on bus snooping for cache activity if one. + * WBE: Write Buffer Enable, one turns it on. + * MID: The ModuleID of the chip for MBus transactions. + * BM: Boot-Mode. One indicates the MMU is in boot mode. + * C: Indicates whether accesses are cachable while the MMU is + * disabled. + * CS: Cache Size -- 0 = 128k, 1 = 256k + * MR: Memory Reflection, one indicates that the memory bus connected + * to the MBus supports memory reflection. + * CM: Cache Mode -- 0 = write-through, 1 = copy-back + * CE: Cache Enable -- 0 = no caching, 1 = cache is on + * NF: No Fault -- 0 = faults trap the CPU from supervisor mode + * 1 = faults from supervisor mode do not generate traps + * ME: MMU Enable -- 0 = MMU is off, 1 = MMU is on + */ + +#define HYPERSPARC_CWENABLE 0x00200000 +#define HYPERSPARC_SBENABLE 0x00100000 +#define HYPERSPARC_WBENABLE 0x00080000 +#define HYPERSPARC_MIDMASK 0x00078000 +#define HYPERSPARC_BMODE 0x00004000 +#define HYPERSPARC_ACENABLE 0x00002000 +#define HYPERSPARC_CSIZE 0x00001000 +#define HYPERSPARC_MRFLCT 0x00000800 +#define HYPERSPARC_CMODE 0x00000400 +#define HYPERSPARC_CENABLE 0x00000100 +#define HYPERSPARC_NFAULT 0x00000002 +#define HYPERSPARC_MENABLE 0x00000001 + + +/* The ICCR instruction cache register on the HyperSparc. + * + * ----------------------------------------------- + * | | FTD | ICE | + * ----------------------------------------------- + * 31 1 0 + * + * This register is accessed using the V8 'wrasr' and 'rdasr' + * opcodes, since not all assemblers understand them and those + * that do use different semantics I will just hard code the + * instruction with a '.word' statement. + * + * FTD: If set to one flush instructions executed during an + * instruction cache hit occurs, the corresponding line + * for said cache-hit is invalidated. If FTD is zero, + * an unimplemented 'flush' trap will occur when any + * flush is executed by the processor. + * + * ICE: If set to one, the instruction cache is enabled. If + * zero, the cache will not be used for instruction fetches. + * + * All other bits are read as zeros, and writes to them have no + * effect. + * + * Wheee, not many assemblers understand the %iccr register nor + * the generic asr r/w instructions. + * + * 1000 0011 0100 0111 1100 0000 0000 0000 ! rd %iccr, %g1 + * + * 0x 8 3 4 7 c 0 0 0 ! 0x8347c000 + * + * 1011 1111 1000 0000 0110 0000 0000 0000 ! wr %g1, 0x0, %iccr + * + * 0x b f 8 0 6 0 0 0 ! 0xbf806000 + * + */ + +#define HYPERSPARC_ICCR_FTD 0x00000002 +#define HYPERSPARC_ICCR_ICE 0x00000001 + +#ifndef __ASSEMBLY__ + +static inline unsigned int get_ross_icr(void) +{ + unsigned int icreg; + + __asm__ __volatile__(".word 0x8347c000\n\t" /* rd %iccr, %g1 */ + "mov %%g1, %0\n\t" + : "=r" (icreg) + : /* no inputs */ + : "g1", "memory"); + + return icreg; +} + +static inline void put_ross_icr(unsigned int icreg) +{ + __asm__ __volatile__("or %%g0, %0, %%g1\n\t" + ".word 0xbf806000\n\t" /* wr %g1, 0x0, %iccr */ + "nop\n\t" + "nop\n\t" + "nop\n\t" + : /* no outputs */ + : "r" (icreg) + : "g1", "memory"); + + return; +} + +/* HyperSparc specific cache flushing. */ + +/* This is for the on-chip instruction cache. */ +static inline void hyper_flush_whole_icache(void) +{ + __asm__ __volatile__("sta %%g0, [%%g0] %0\n\t" + : /* no outputs */ + : "i" (ASI_M_FLUSH_IWHOLE) + : "memory"); + return; +} + +extern int vac_cache_size; +extern int vac_line_size; + +static inline void hyper_clear_all_tags(void) +{ + unsigned long addr; + + for(addr = 0; addr < vac_cache_size; addr += vac_line_size) + __asm__ __volatile__("sta %%g0, [%0] %1\n\t" + : /* no outputs */ + : "r" (addr), "i" (ASI_M_DATAC_TAG) + : "memory"); +} + +static inline void hyper_flush_unconditional_combined(void) +{ + unsigned long addr; + + for (addr = 0; addr < vac_cache_size; addr += vac_line_size) + __asm__ __volatile__("sta %%g0, [%0] %1\n\t" + : /* no outputs */ + : "r" (addr), "i" (ASI_M_FLUSH_CTX) + : "memory"); +} + +static inline void hyper_flush_cache_user(void) +{ + unsigned long addr; + + for (addr = 0; addr < vac_cache_size; addr += vac_line_size) + __asm__ __volatile__("sta %%g0, [%0] %1\n\t" + : /* no outputs */ + : "r" (addr), "i" (ASI_M_FLUSH_USER) + : "memory"); +} + +static inline void hyper_flush_cache_page(unsigned long page) +{ + unsigned long end; + + page &= PAGE_MASK; + end = page + PAGE_SIZE; + while (page < end) { + __asm__ __volatile__("sta %%g0, [%0] %1\n\t" + : /* no outputs */ + : "r" (page), "i" (ASI_M_FLUSH_PAGE) + : "memory"); + page += vac_line_size; + } +} + +#endif /* !(__ASSEMBLY__) */ + +#endif /* !(_SPARC_ROSS_H) */ |