diff options
Diffstat (limited to 'arch/tile/lib')
29 files changed, 3418 insertions, 0 deletions
diff --git a/arch/tile/lib/Makefile b/arch/tile/lib/Makefile new file mode 100644 index 000000000..c4211cbb2 --- /dev/null +++ b/arch/tile/lib/Makefile @@ -0,0 +1,18 @@ +# +# Makefile for TILE-specific library files.. +# + +lib-y = cacheflush.o checksum.o cpumask.o delay.o uaccess.o \ + memmove.o memcpy_$(BITS).o memchr_$(BITS).o memset_$(BITS).o \ + strchr_$(BITS).o strlen_$(BITS).o strnlen_$(BITS).o + +lib-$(CONFIG_TILEGX) += memcpy_user_64.o +lib-$(CONFIG_TILEPRO) += atomic_32.o atomic_asm_32.o +lib-$(CONFIG_SMP) += spinlock_$(BITS).o usercopy_$(BITS).o + +obj-$(CONFIG_MODULES) += exports.o + +# The finv_buffer_remote() and copy_{to,from}_user() routines can't +# have -pg added, since they both rely on being leaf functions. +CFLAGS_REMOVE_cacheflush.o = -pg +CFLAGS_REMOVE_memcpy_user_64.o = -pg diff --git a/arch/tile/lib/atomic_32.c b/arch/tile/lib/atomic_32.c new file mode 100644 index 000000000..c89b211fd --- /dev/null +++ b/arch/tile/lib/atomic_32.c @@ -0,0 +1,183 @@ +/* + * Copyright 2010 Tilera Corporation. All Rights Reserved. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation, version 2. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or + * NON INFRINGEMENT. See the GNU General Public License for + * more details. + */ + +#include <linux/cache.h> +#include <linux/delay.h> +#include <linux/uaccess.h> +#include <linux/module.h> +#include <linux/mm.h> +#include <linux/atomic.h> +#include <arch/chip.h> + +/* This page is remapped on startup to be hash-for-home. */ +int atomic_locks[PAGE_SIZE / sizeof(int)] __page_aligned_bss; + +int *__atomic_hashed_lock(volatile void *v) +{ + /* NOTE: this code must match "sys_cmpxchg" in kernel/intvec_32.S */ + /* + * Use bits [3, 3 + ATOMIC_HASH_SHIFT) as the lock index. + * Using mm works here because atomic_locks is page aligned. + */ + unsigned long ptr = __insn_mm((unsigned long)v >> 1, + (unsigned long)atomic_locks, + 2, (ATOMIC_HASH_SHIFT + 2) - 1); + return (int *)ptr; +} + +#ifdef CONFIG_SMP +/* Return whether the passed pointer is a valid atomic lock pointer. */ +static int is_atomic_lock(int *p) +{ + return p >= &atomic_locks[0] && p < &atomic_locks[ATOMIC_HASH_SIZE]; +} + +void __atomic_fault_unlock(int *irqlock_word) +{ + BUG_ON(!is_atomic_lock(irqlock_word)); + BUG_ON(*irqlock_word != 1); + *irqlock_word = 0; +} + +#endif /* CONFIG_SMP */ + +static inline int *__atomic_setup(volatile void *v) +{ + /* Issue a load to the target to bring it into cache. */ + *(volatile int *)v; + return __atomic_hashed_lock(v); +} + +int _atomic_xchg(int *v, int n) +{ + return __atomic_xchg(v, __atomic_setup(v), n).val; +} +EXPORT_SYMBOL(_atomic_xchg); + +int _atomic_xchg_add(int *v, int i) +{ + return __atomic_xchg_add(v, __atomic_setup(v), i).val; +} +EXPORT_SYMBOL(_atomic_xchg_add); + +int _atomic_xchg_add_unless(int *v, int a, int u) +{ + /* + * Note: argument order is switched here since it is easier + * to use the first argument consistently as the "old value" + * in the assembly, as is done for _atomic_cmpxchg(). + */ + return __atomic_xchg_add_unless(v, __atomic_setup(v), u, a).val; +} +EXPORT_SYMBOL(_atomic_xchg_add_unless); + +int _atomic_cmpxchg(int *v, int o, int n) +{ + return __atomic_cmpxchg(v, __atomic_setup(v), o, n).val; +} +EXPORT_SYMBOL(_atomic_cmpxchg); + +unsigned long _atomic_or(volatile unsigned long *p, unsigned long mask) +{ + return __atomic_or((int *)p, __atomic_setup(p), mask).val; +} +EXPORT_SYMBOL(_atomic_or); + +unsigned long _atomic_andn(volatile unsigned long *p, unsigned long mask) +{ + return __atomic_andn((int *)p, __atomic_setup(p), mask).val; +} +EXPORT_SYMBOL(_atomic_andn); + +unsigned long _atomic_xor(volatile unsigned long *p, unsigned long mask) +{ + return __atomic_xor((int *)p, __atomic_setup(p), mask).val; +} +EXPORT_SYMBOL(_atomic_xor); + + +long long _atomic64_xchg(long long *v, long long n) +{ + return __atomic64_xchg(v, __atomic_setup(v), n); +} +EXPORT_SYMBOL(_atomic64_xchg); + +long long _atomic64_xchg_add(long long *v, long long i) +{ + return __atomic64_xchg_add(v, __atomic_setup(v), i); +} +EXPORT_SYMBOL(_atomic64_xchg_add); + +long long _atomic64_xchg_add_unless(long long *v, long long a, long long u) +{ + /* + * Note: argument order is switched here since it is easier + * to use the first argument consistently as the "old value" + * in the assembly, as is done for _atomic_cmpxchg(). + */ + return __atomic64_xchg_add_unless(v, __atomic_setup(v), u, a); +} +EXPORT_SYMBOL(_atomic64_xchg_add_unless); + +long long _atomic64_cmpxchg(long long *v, long long o, long long n) +{ + return __atomic64_cmpxchg(v, __atomic_setup(v), o, n); +} +EXPORT_SYMBOL(_atomic64_cmpxchg); + + +/* + * If any of the atomic or futex routines hit a bad address (not in + * the page tables at kernel PL) this routine is called. The futex + * routines are never used on kernel space, and the normal atomics and + * bitops are never used on user space. So a fault on kernel space + * must be fatal, but a fault on userspace is a futex fault and we + * need to return -EFAULT. Note that the context this routine is + * invoked in is the context of the "_atomic_xxx()" routines called + * by the functions in this file. + */ +struct __get_user __atomic_bad_address(int __user *addr) +{ + if (unlikely(!access_ok(VERIFY_WRITE, addr, sizeof(int)))) + panic("Bad address used for kernel atomic op: %p\n", addr); + return (struct __get_user) { .err = -EFAULT }; +} + + +void __init __init_atomic_per_cpu(void) +{ + /* Validate power-of-two and "bigger than cpus" assumption */ + BUILD_BUG_ON(ATOMIC_HASH_SIZE & (ATOMIC_HASH_SIZE-1)); + BUG_ON(ATOMIC_HASH_SIZE < nr_cpu_ids); + + /* + * On TILEPro we prefer to use a single hash-for-home + * page, since this means atomic operations are less + * likely to encounter a TLB fault and thus should + * in general perform faster. You may wish to disable + * this in situations where few hash-for-home tiles + * are configured. + */ + BUG_ON((unsigned long)atomic_locks % PAGE_SIZE != 0); + + /* The locks must all fit on one page. */ + BUILD_BUG_ON(ATOMIC_HASH_SIZE * sizeof(int) > PAGE_SIZE); + + /* + * We use the page offset of the atomic value's address as + * an index into atomic_locks, excluding the low 3 bits. + * That should not produce more indices than ATOMIC_HASH_SIZE. + */ + BUILD_BUG_ON((PAGE_SIZE >> 3) > ATOMIC_HASH_SIZE); +} diff --git a/arch/tile/lib/atomic_asm_32.S b/arch/tile/lib/atomic_asm_32.S new file mode 100644 index 000000000..6bda3132c --- /dev/null +++ b/arch/tile/lib/atomic_asm_32.S @@ -0,0 +1,197 @@ +/* + * Copyright 2010 Tilera Corporation. All Rights Reserved. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation, version 2. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or + * NON INFRINGEMENT. See the GNU General Public License for + * more details. + * + * Support routines for atomic operations. Each function takes: + * + * r0: address to manipulate + * r1: pointer to atomic lock guarding this operation (for ATOMIC_LOCK_REG) + * r2: new value to write, or for cmpxchg/add_unless, value to compare against + * r3: (cmpxchg/xchg_add_unless) new value to write or add; + * (atomic64 ops) high word of value to write + * r4/r5: (cmpxchg64/add_unless64) new value to write or add + * + * The 32-bit routines return a "struct __get_user" so that the futex code + * has an opportunity to return -EFAULT to the user if needed. + * The 64-bit routines just return a "long long" with the value, + * since they are only used from kernel space and don't expect to fault. + * Support for 16-bit ops is included in the framework but we don't provide + * any (x86_64 has an atomic_inc_short(), so we might want to some day). + * + * Note that the caller is advised to issue a suitable L1 or L2 + * prefetch on the address being manipulated to avoid extra stalls. + * In addition, the hot path is on two icache lines, and we start with + * a jump to the second line to make sure they are both in cache so + * that we never stall waiting on icache fill while holding the lock. + * (This doesn't work out with most 64-bit ops, since they consume + * too many bundles, so may take an extra i-cache stall.) + * + * These routines set the INTERRUPT_CRITICAL_SECTION bit, just + * like sys_cmpxchg(), so that NMIs like PERF_COUNT will not interrupt + * the code, just page faults. + * + * If the load or store faults in a way that can be directly fixed in + * the do_page_fault_ics() handler (e.g. a vmalloc reference) we fix it + * directly, return to the instruction that faulted, and retry it. + * + * If the load or store faults in a way that potentially requires us + * to release the atomic lock, then retry (e.g. a migrating PTE), we + * reset the PC in do_page_fault_ics() to the "tns" instruction so + * that on return we will reacquire the lock and restart the op. We + * are somewhat overloading the exception_table_entry notion by doing + * this, since those entries are not normally used for migrating PTEs. + * + * If the main page fault handler discovers a bad address, it will see + * the PC pointing to the "tns" instruction (due to the earlier + * exception_table_entry processing in do_page_fault_ics), and + * re-reset the PC to the fault handler, atomic_bad_address(), which + * effectively takes over from the atomic op and can either return a + * bad "struct __get_user" (for user addresses) or can just panic (for + * bad kernel addresses). + * + * Note that if the value we would store is the same as what we + * loaded, we bypass the store. Other platforms with true atomics can + * make the guarantee that a non-atomic __clear_bit(), for example, + * can safely race with an atomic test_and_set_bit(); this example is + * from bit_spinlock.h in slub_lock() / slub_unlock(). We can't do + * that on Tile since the "atomic" op is really just a + * read/modify/write, and can race with the non-atomic + * read/modify/write. However, if we can short-circuit the write when + * it is not needed, in the atomic case, we avoid the race. + */ + +#include <linux/linkage.h> +#include <asm/atomic_32.h> +#include <asm/page.h> +#include <asm/processor.h> + + .section .text.atomic,"ax" +ENTRY(__start_atomic_asm_code) + + .macro atomic_op, name, bitwidth, body + .align 64 +STD_ENTRY_SECTION(__atomic\name, .text.atomic) + { + movei r24, 1 + j 4f /* branch to second cache line */ + } +1: { + .ifc \bitwidth,16 + lh r22, r0 + .else + lw r22, r0 + addi r28, r0, 4 + .endif + } + .ifc \bitwidth,64 + lw r23, r28 + .endif + \body /* set r24, and r25 if 64-bit */ + { + seq r26, r22, r24 + seq r27, r23, r25 + } + .ifc \bitwidth,64 + bbnst r27, 2f + .endif + bbs r26, 3f /* skip write-back if it's the same value */ +2: { + .ifc \bitwidth,16 + sh r0, r24 + .else + sw r0, r24 + .endif + } + .ifc \bitwidth,64 + sw r28, r25 + .endif + mf +3: { + move r0, r22 + .ifc \bitwidth,64 + move r1, r23 + .else + move r1, zero + .endif + sw ATOMIC_LOCK_REG_NAME, zero + } + mtspr INTERRUPT_CRITICAL_SECTION, zero + jrp lr +4: { + move ATOMIC_LOCK_REG_NAME, r1 + mtspr INTERRUPT_CRITICAL_SECTION, r24 + } +#ifndef CONFIG_SMP + j 1b /* no atomic locks */ +#else + { + tns r21, ATOMIC_LOCK_REG_NAME + moveli r23, 2048 /* maximum backoff time in cycles */ + } + { + bzt r21, 1b /* branch if lock acquired */ + moveli r25, 32 /* starting backoff time in cycles */ + } +5: mtspr INTERRUPT_CRITICAL_SECTION, zero + mfspr r26, CYCLE_LOW /* get start point for this backoff */ +6: mfspr r22, CYCLE_LOW /* test to see if we've backed off enough */ + sub r22, r22, r26 + slt r22, r22, r25 + bbst r22, 6b + { + mtspr INTERRUPT_CRITICAL_SECTION, r24 + shli r25, r25, 1 /* double the backoff; retry the tns */ + } + { + tns r21, ATOMIC_LOCK_REG_NAME + slt r26, r23, r25 /* is the proposed backoff too big? */ + } + { + bzt r21, 1b /* branch if lock acquired */ + mvnz r25, r26, r23 + } + j 5b +#endif + STD_ENDPROC(__atomic\name) + .ifc \bitwidth,32 + .pushsection __ex_table,"a" + .align 4 + .word 1b, __atomic\name + .word 2b, __atomic\name + .word __atomic\name, __atomic_bad_address + .popsection + .endif + .endm + +atomic_op _cmpxchg, 32, "seq r26, r22, r2; { bbns r26, 3f; move r24, r3 }" +atomic_op _xchg, 32, "move r24, r2" +atomic_op _xchg_add, 32, "add r24, r22, r2" +atomic_op _xchg_add_unless, 32, \ + "sne r26, r22, r2; { bbns r26, 3f; add r24, r22, r3 }" +atomic_op _or, 32, "or r24, r22, r2" +atomic_op _andn, 32, "nor r2, r2, zero; and r24, r22, r2" +atomic_op _xor, 32, "xor r24, r22, r2" + +atomic_op 64_cmpxchg, 64, "{ seq r26, r22, r2; seq r27, r23, r3 }; \ + { bbns r26, 3f; move r24, r4 }; { bbns r27, 3f; move r25, r5 }" +atomic_op 64_xchg, 64, "{ move r24, r2; move r25, r3 }" +atomic_op 64_xchg_add, 64, "{ add r24, r22, r2; add r25, r23, r3 }; \ + slt_u r26, r24, r22; add r25, r25, r26" +atomic_op 64_xchg_add_unless, 64, \ + "{ sne r26, r22, r2; sne r27, r23, r3 }; \ + { bbns r26, 3f; add r24, r22, r4 }; \ + { bbns r27, 3f; add r25, r23, r5 }; \ + slt_u r26, r24, r22; add r25, r25, r26" + + jrp lr /* happy backtracer */ + +ENTRY(__end_atomic_asm_code) diff --git a/arch/tile/lib/cacheflush.c b/arch/tile/lib/cacheflush.c new file mode 100644 index 000000000..9c0ec2200 --- /dev/null +++ b/arch/tile/lib/cacheflush.c @@ -0,0 +1,173 @@ +/* + * Copyright 2010 Tilera Corporation. All Rights Reserved. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation, version 2. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or + * NON INFRINGEMENT. See the GNU General Public License for + * more details. + */ + +#include <linux/export.h> +#include <asm/page.h> +#include <asm/cacheflush.h> +#include <arch/icache.h> +#include <arch/spr_def.h> + + +void __flush_icache_range(unsigned long start, unsigned long end) +{ + invalidate_icache((const void *)start, end - start, PAGE_SIZE); +} + + +/* Force a load instruction to issue. */ +static inline void force_load(char *p) +{ + *(volatile char *)p; +} + +/* + * Flush and invalidate a VA range that is homed remotely on a single + * core (if "!hfh") or homed via hash-for-home (if "hfh"), waiting + * until the memory controller holds the flushed values. + */ +void __attribute__((optimize("omit-frame-pointer"))) +finv_buffer_remote(void *buffer, size_t size, int hfh) +{ + char *p, *base; + size_t step_size, load_count; + + /* + * On TILEPro the striping granularity is a fixed 8KB; on + * TILE-Gx it is configurable, and we rely on the fact that + * the hypervisor always configures maximum striping, so that + * bits 9 and 10 of the PA are part of the stripe function, so + * every 512 bytes we hit a striping boundary. + * + */ +#ifdef __tilegx__ + const unsigned long STRIPE_WIDTH = 512; +#else + const unsigned long STRIPE_WIDTH = 8192; +#endif + +#ifdef __tilegx__ + /* + * On TILE-Gx, we must disable the dstream prefetcher before doing + * a cache flush; otherwise, we could end up with data in the cache + * that we don't want there. Note that normally we'd do an mf + * after the SPR write to disabling the prefetcher, but we do one + * below, before any further loads, so there's no need to do it + * here. + */ + uint_reg_t old_dstream_pf = __insn_mfspr(SPR_DSTREAM_PF); + __insn_mtspr(SPR_DSTREAM_PF, 0); +#endif + + /* + * Flush and invalidate the buffer out of the local L1/L2 + * and request the home cache to flush and invalidate as well. + */ + __finv_buffer(buffer, size); + + /* + * Wait for the home cache to acknowledge that it has processed + * all the flush-and-invalidate requests. This does not mean + * that the flushed data has reached the memory controller yet, + * but it does mean the home cache is processing the flushes. + */ + __insn_mf(); + + /* + * Issue a load to the last cache line, which can't complete + * until all the previously-issued flushes to the same memory + * controller have also completed. If we weren't striping + * memory, that one load would be sufficient, but since we may + * be, we also need to back up to the last load issued to + * another memory controller, which would be the point where + * we crossed a "striping" boundary (the granularity of striping + * across memory controllers). Keep backing up and doing this + * until we are before the beginning of the buffer, or have + * hit all the controllers. + * + * If we are flushing a hash-for-home buffer, it's even worse. + * Each line may be homed on a different tile, and each tile + * may have up to four lines that are on different + * controllers. So as we walk backwards, we have to touch + * enough cache lines to satisfy these constraints. In + * practice this ends up being close enough to "load from + * every cache line on a full memory stripe on each + * controller" that we simply do that, to simplify the logic. + * + * On TILE-Gx the hash-for-home function is much more complex, + * with the upshot being we can't readily guarantee we have + * hit both entries in the 128-entry AMT that were hit by any + * load in the entire range, so we just re-load them all. + * With larger buffers, we may want to consider using a hypervisor + * trap to issue loads directly to each hash-for-home tile for + * each controller (doing it from Linux would trash the TLB). + */ + if (hfh) { + step_size = L2_CACHE_BYTES; +#ifdef __tilegx__ + load_count = (size + L2_CACHE_BYTES - 1) / L2_CACHE_BYTES; +#else + load_count = (STRIPE_WIDTH / L2_CACHE_BYTES) * + (1 << CHIP_LOG_NUM_MSHIMS()); +#endif + } else { + step_size = STRIPE_WIDTH; + load_count = (1 << CHIP_LOG_NUM_MSHIMS()); + } + + /* Load the last byte of the buffer. */ + p = (char *)buffer + size - 1; + force_load(p); + + /* Bump down to the end of the previous stripe or cache line. */ + p -= step_size; + p = (char *)((unsigned long)p | (step_size - 1)); + + /* Figure out how far back we need to go. */ + base = p - (step_size * (load_count - 2)); + if ((unsigned long)base < (unsigned long)buffer) + base = buffer; + + /* + * Fire all the loads we need. The MAF only has eight entries + * so we can have at most eight outstanding loads, so we + * unroll by that amount. + */ +#pragma unroll 8 + for (; p >= base; p -= step_size) + force_load(p); + + /* + * Repeat, but with finv's instead of loads, to get rid of the + * data we just loaded into our own cache and the old home L3. + * No need to unroll since finv's don't target a register. + * The finv's are guaranteed not to actually flush the data in + * the buffer back to their home, since we just read it, so the + * lines are clean in cache; we will only invalidate those lines. + */ + p = (char *)buffer + size - 1; + __insn_finv(p); + p -= step_size; + p = (char *)((unsigned long)p | (step_size - 1)); + for (; p >= base; p -= step_size) + __insn_finv(p); + + /* Wait for these finv's (and thus the first finvs) to be done. */ + __insn_mf(); + +#ifdef __tilegx__ + /* Reenable the prefetcher. */ + __insn_mtspr(SPR_DSTREAM_PF, old_dstream_pf); +#endif +} +EXPORT_SYMBOL_GPL(finv_buffer_remote); diff --git a/arch/tile/lib/checksum.c b/arch/tile/lib/checksum.c new file mode 100644 index 000000000..c3ca3e64d --- /dev/null +++ b/arch/tile/lib/checksum.c @@ -0,0 +1,89 @@ +/* + * Copyright 2010 Tilera Corporation. All Rights Reserved. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation, version 2. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or + * NON INFRINGEMENT. See the GNU General Public License for + * more details. + * Support code for the main lib/checksum.c. + */ + +#include <net/checksum.h> +#include <linux/module.h> + +__wsum do_csum(const unsigned char *buff, int len) +{ + int odd, count; + unsigned long result = 0; + + if (len <= 0) + goto out; + odd = 1 & (unsigned long) buff; + if (odd) { + result = (*buff << 8); + len--; + buff++; + } + count = len >> 1; /* nr of 16-bit words.. */ + if (count) { + if (2 & (unsigned long) buff) { + result += *(const unsigned short *)buff; + count--; + len -= 2; + buff += 2; + } + count >>= 1; /* nr of 32-bit words.. */ + if (count) { +#ifdef __tilegx__ + if (4 & (unsigned long) buff) { + unsigned int w = *(const unsigned int *)buff; + result = __insn_v2sadau(result, w, 0); + count--; + len -= 4; + buff += 4; + } + count >>= 1; /* nr of 64-bit words.. */ +#endif + + /* + * This algorithm could wrap around for very + * large buffers, but those should be impossible. + */ + BUG_ON(count >= 65530); + + while (count) { + unsigned long w = *(const unsigned long *)buff; + count--; + buff += sizeof(w); +#ifdef __tilegx__ + result = __insn_v2sadau(result, w, 0); +#else + result = __insn_sadah_u(result, w, 0); +#endif + } +#ifdef __tilegx__ + if (len & 4) { + unsigned int w = *(const unsigned int *)buff; + result = __insn_v2sadau(result, w, 0); + buff += 4; + } +#endif + } + if (len & 2) { + result += *(const unsigned short *) buff; + buff += 2; + } + } + if (len & 1) + result += *buff; + result = csum_long(result); + if (odd) + result = swab16(result); +out: + return result; +} diff --git a/arch/tile/lib/cpumask.c b/arch/tile/lib/cpumask.c new file mode 100644 index 000000000..75947edcc --- /dev/null +++ b/arch/tile/lib/cpumask.c @@ -0,0 +1,54 @@ +/* + * Copyright 2010 Tilera Corporation. All Rights Reserved. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation, version 2. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or + * NON INFRINGEMENT. See the GNU General Public License for + * more details. + */ + +#include <linux/cpumask.h> +#include <linux/ctype.h> +#include <linux/errno.h> +#include <linux/smp.h> +#include <linux/export.h> + +/* + * Allow cropping out bits beyond the end of the array. + * Move to "lib" directory if more clients want to use this routine. + */ +int bitmap_parselist_crop(const char *bp, unsigned long *maskp, int nmaskbits) +{ + unsigned a, b; + + bitmap_zero(maskp, nmaskbits); + do { + if (!isdigit(*bp)) + return -EINVAL; + a = simple_strtoul(bp, (char **)&bp, 10); + b = a; + if (*bp == '-') { + bp++; + if (!isdigit(*bp)) + return -EINVAL; + b = simple_strtoul(bp, (char **)&bp, 10); + } + if (!(a <= b)) + return -EINVAL; + if (b >= nmaskbits) + b = nmaskbits-1; + while (a <= b) { + set_bit(a, maskp); + a++; + } + if (*bp == ',') + bp++; + } while (*bp != '\0' && *bp != '\n'); + return 0; +} +EXPORT_SYMBOL(bitmap_parselist_crop); diff --git a/arch/tile/lib/delay.c b/arch/tile/lib/delay.c new file mode 100644 index 000000000..cdacdd11d --- /dev/null +++ b/arch/tile/lib/delay.c @@ -0,0 +1,45 @@ +/* + * Copyright 2010 Tilera Corporation. All Rights Reserved. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation, version 2. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or + * NON INFRINGEMENT. See the GNU General Public License for + * more details. + */ + +#include <linux/module.h> +#include <linux/delay.h> +#include <linux/thread_info.h> +#include <asm/timex.h> + +void __udelay(unsigned long usecs) +{ + if (usecs > ULONG_MAX / 1000) { + WARN_ON_ONCE(usecs > ULONG_MAX / 1000); + usecs = ULONG_MAX / 1000; + } + __ndelay(usecs * 1000); +} +EXPORT_SYMBOL(__udelay); + +void __ndelay(unsigned long nsecs) +{ + cycles_t target = get_cycles(); + target += ns2cycles(nsecs); + while (get_cycles() < target) + cpu_relax(); +} +EXPORT_SYMBOL(__ndelay); + +void __delay(unsigned long cycles) +{ + cycles_t target = get_cycles() + cycles; + while (get_cycles() < target) + cpu_relax(); +} +EXPORT_SYMBOL(__delay); diff --git a/arch/tile/lib/exports.c b/arch/tile/lib/exports.c new file mode 100644 index 000000000..82733c87d --- /dev/null +++ b/arch/tile/lib/exports.c @@ -0,0 +1,94 @@ +/* + * Copyright 2010 Tilera Corporation. All Rights Reserved. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation, version 2. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or + * NON INFRINGEMENT. See the GNU General Public License for + * more details. + * + * Exports from assembler code and from libtile-cc. + */ + +#include <linux/module.h> + +/* arch/tile/lib/usercopy.S */ +#include <linux/uaccess.h> +EXPORT_SYMBOL(strnlen_user_asm); +EXPORT_SYMBOL(strncpy_from_user_asm); +EXPORT_SYMBOL(clear_user_asm); +EXPORT_SYMBOL(flush_user_asm); +EXPORT_SYMBOL(finv_user_asm); + +/* arch/tile/kernel/entry.S */ +#include <linux/kernel.h> +#include <asm/processor.h> +EXPORT_SYMBOL(current_text_addr); +EXPORT_SYMBOL(dump_stack); + +/* arch/tile/kernel/head.S */ +EXPORT_SYMBOL(empty_zero_page); + +#ifdef CONFIG_FUNCTION_TRACER +/* arch/tile/kernel/mcount_64.S */ +#include <asm/ftrace.h> +EXPORT_SYMBOL(__mcount); +#endif /* CONFIG_FUNCTION_TRACER */ + +/* arch/tile/lib/, various memcpy files */ +EXPORT_SYMBOL(memcpy); +EXPORT_SYMBOL(__copy_to_user_inatomic); +EXPORT_SYMBOL(__copy_from_user_inatomic); +EXPORT_SYMBOL(__copy_from_user_zeroing); +#ifdef __tilegx__ +EXPORT_SYMBOL(__copy_in_user_inatomic); +#endif + +/* hypervisor glue */ +#include <hv/hypervisor.h> +EXPORT_SYMBOL(hv_dev_open); +EXPORT_SYMBOL(hv_dev_pread); +EXPORT_SYMBOL(hv_dev_pwrite); +EXPORT_SYMBOL(hv_dev_preada); +EXPORT_SYMBOL(hv_dev_pwritea); +EXPORT_SYMBOL(hv_dev_poll); +EXPORT_SYMBOL(hv_dev_poll_cancel); +EXPORT_SYMBOL(hv_dev_close); +EXPORT_SYMBOL(hv_sysconf); +EXPORT_SYMBOL(hv_confstr); +EXPORT_SYMBOL(hv_get_rtc); +EXPORT_SYMBOL(hv_set_rtc); + +/* libgcc.a */ +uint32_t __udivsi3(uint32_t dividend, uint32_t divisor); +EXPORT_SYMBOL(__udivsi3); +int32_t __divsi3(int32_t dividend, int32_t divisor); +EXPORT_SYMBOL(__divsi3); +uint64_t __udivdi3(uint64_t dividend, uint64_t divisor); +EXPORT_SYMBOL(__udivdi3); +int64_t __divdi3(int64_t dividend, int64_t divisor); +EXPORT_SYMBOL(__divdi3); +uint32_t __umodsi3(uint32_t dividend, uint32_t divisor); +EXPORT_SYMBOL(__umodsi3); +int32_t __modsi3(int32_t dividend, int32_t divisor); +EXPORT_SYMBOL(__modsi3); +uint64_t __umoddi3(uint64_t dividend, uint64_t divisor); +EXPORT_SYMBOL(__umoddi3); +int64_t __moddi3(int64_t dividend, int64_t divisor); +EXPORT_SYMBOL(__moddi3); +#ifndef __tilegx__ +int64_t __muldi3(int64_t, int64_t); +EXPORT_SYMBOL(__muldi3); +uint64_t __lshrdi3(uint64_t, unsigned int); +EXPORT_SYMBOL(__lshrdi3); +uint64_t __ashrdi3(uint64_t, unsigned int); +EXPORT_SYMBOL(__ashrdi3); +uint64_t __ashldi3(uint64_t, unsigned int); +EXPORT_SYMBOL(__ashldi3); +int __ffsdi2(uint64_t); +EXPORT_SYMBOL(__ffsdi2); +#endif diff --git a/arch/tile/lib/memchr_32.c b/arch/tile/lib/memchr_32.c new file mode 100644 index 000000000..cc3d9badf --- /dev/null +++ b/arch/tile/lib/memchr_32.c @@ -0,0 +1,71 @@ +/* + * Copyright 2010 Tilera Corporation. All Rights Reserved. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation, version 2. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or + * NON INFRINGEMENT. See the GNU General Public License for + * more details. + */ + +#include <linux/types.h> +#include <linux/string.h> +#include <linux/module.h> + +void *memchr(const void *s, int c, size_t n) +{ + const uint32_t *last_word_ptr; + const uint32_t *p; + const char *last_byte_ptr; + uintptr_t s_int; + uint32_t goal, before_mask, v, bits; + char *ret; + + if (__builtin_expect(n == 0, 0)) { + /* Don't dereference any memory if the array is empty. */ + return NULL; + } + + /* Get an aligned pointer. */ + s_int = (uintptr_t) s; + p = (const uint32_t *)(s_int & -4); + + /* Create four copies of the byte for which we are looking. */ + goal = 0x01010101 * (uint8_t) c; + + /* Read the first word, but munge it so that bytes before the array + * will not match goal. + * + * Note that this shift count expression works because we know + * shift counts are taken mod 32. + */ + before_mask = (1 << (s_int << 3)) - 1; + v = (*p | before_mask) ^ (goal & before_mask); + + /* Compute the address of the last byte. */ + last_byte_ptr = (const char *)s + n - 1; + + /* Compute the address of the word containing the last byte. */ + last_word_ptr = (const uint32_t *)((uintptr_t) last_byte_ptr & -4); + + while ((bits = __insn_seqb(v, goal)) == 0) { + if (__builtin_expect(p == last_word_ptr, 0)) { + /* We already read the last word in the array, + * so give up. + */ + return NULL; + } + v = *++p; + } + + /* We found a match, but it might be in a byte past the end + * of the array. + */ + ret = ((char *)p) + (__insn_ctz(bits) >> 3); + return (ret <= last_byte_ptr) ? ret : NULL; +} +EXPORT_SYMBOL(memchr); diff --git a/arch/tile/lib/memchr_64.c b/arch/tile/lib/memchr_64.c new file mode 100644 index 000000000..f8196b3a9 --- /dev/null +++ b/arch/tile/lib/memchr_64.c @@ -0,0 +1,69 @@ +/* + * Copyright 2011 Tilera Corporation. All Rights Reserved. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation, version 2. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or + * NON INFRINGEMENT. See the GNU General Public License for + * more details. + */ + +#include <linux/types.h> +#include <linux/string.h> +#include <linux/module.h> +#include "string-endian.h" + +void *memchr(const void *s, int c, size_t n) +{ + const uint64_t *last_word_ptr; + const uint64_t *p; + const char *last_byte_ptr; + uintptr_t s_int; + uint64_t goal, before_mask, v, bits; + char *ret; + + if (__builtin_expect(n == 0, 0)) { + /* Don't dereference any memory if the array is empty. */ + return NULL; + } + + /* Get an aligned pointer. */ + s_int = (uintptr_t) s; + p = (const uint64_t *)(s_int & -8); + + /* Create eight copies of the byte for which we are looking. */ + goal = copy_byte(c); + + /* Read the first word, but munge it so that bytes before the array + * will not match goal. + */ + before_mask = MASK(s_int); + v = (*p | before_mask) ^ (goal & before_mask); + + /* Compute the address of the last byte. */ + last_byte_ptr = (const char *)s + n - 1; + + /* Compute the address of the word containing the last byte. */ + last_word_ptr = (const uint64_t *)((uintptr_t) last_byte_ptr & -8); + + while ((bits = __insn_v1cmpeq(v, goal)) == 0) { + if (__builtin_expect(p == last_word_ptr, 0)) { + /* We already read the last word in the array, + * so give up. + */ + return NULL; + } + v = *++p; + } + + /* We found a match, but it might be in a byte past the end + * of the array. + */ + ret = ((char *)p) + (CFZ(bits) >> 3); + return (ret <= last_byte_ptr) ? ret : NULL; +} +EXPORT_SYMBOL(memchr); diff --git a/arch/tile/lib/memcpy_32.S b/arch/tile/lib/memcpy_32.S new file mode 100644 index 000000000..a2771ae5d --- /dev/null +++ b/arch/tile/lib/memcpy_32.S @@ -0,0 +1,559 @@ +/* + * Copyright 2010 Tilera Corporation. All Rights Reserved. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation, version 2. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or + * NON INFRINGEMENT. See the GNU General Public License for + * more details. + */ + +#include <arch/chip.h> + + +/* + * This file shares the implementation of the userspace memcpy and + * the kernel's memcpy, copy_to_user and copy_from_user. + */ + +#include <linux/linkage.h> + +#define IS_MEMCPY 0 +#define IS_COPY_FROM_USER 1 +#define IS_COPY_FROM_USER_ZEROING 2 +#define IS_COPY_TO_USER -1 + + .section .text.memcpy_common, "ax" + .align 64 + +/* Use this to preface each bundle that can cause an exception so + * the kernel can clean up properly. The special cleanup code should + * not use these, since it knows what it is doing. + */ +#define EX \ + .pushsection __ex_table, "a"; \ + .align 4; \ + .word 9f, memcpy_common_fixup; \ + .popsection; \ + 9 + + +/* __copy_from_user_inatomic takes the kernel target address in r0, + * the user source in r1, and the bytes to copy in r2. + * It returns the number of uncopiable bytes (hopefully zero) in r0. + */ +ENTRY(__copy_from_user_inatomic) +.type __copy_from_user_inatomic, @function + FEEDBACK_ENTER_EXPLICIT(__copy_from_user_inatomic, \ + .text.memcpy_common, \ + .Lend_memcpy_common - __copy_from_user_inatomic) + { movei r29, IS_COPY_FROM_USER; j memcpy_common } + .size __copy_from_user_inatomic, . - __copy_from_user_inatomic + +/* __copy_from_user_zeroing is like __copy_from_user_inatomic, but + * any uncopiable bytes are zeroed in the target. + */ +ENTRY(__copy_from_user_zeroing) +.type __copy_from_user_zeroing, @function + FEEDBACK_REENTER(__copy_from_user_inatomic) + { movei r29, IS_COPY_FROM_USER_ZEROING; j memcpy_common } + .size __copy_from_user_zeroing, . - __copy_from_user_zeroing + +/* __copy_to_user_inatomic takes the user target address in r0, + * the kernel source in r1, and the bytes to copy in r2. + * It returns the number of uncopiable bytes (hopefully zero) in r0. + */ +ENTRY(__copy_to_user_inatomic) +.type __copy_to_user_inatomic, @function + FEEDBACK_REENTER(__copy_from_user_inatomic) + { movei r29, IS_COPY_TO_USER; j memcpy_common } + .size __copy_to_user_inatomic, . - __copy_to_user_inatomic + +ENTRY(memcpy) +.type memcpy, @function + FEEDBACK_REENTER(__copy_from_user_inatomic) + { movei r29, IS_MEMCPY } + .size memcpy, . - memcpy + /* Fall through */ + + .type memcpy_common, @function +memcpy_common: + /* On entry, r29 holds one of the IS_* macro values from above. */ + + + /* r0 is the dest, r1 is the source, r2 is the size. */ + + /* Save aside original dest so we can return it at the end. */ + { sw sp, lr; move r23, r0; or r4, r0, r1 } + + /* Check for an empty size. */ + { bz r2, .Ldone; andi r4, r4, 3 } + + /* Save aside original values in case of a fault. */ + { move r24, r1; move r25, r2 } + move r27, lr + + /* Check for an unaligned source or dest. */ + { bnz r4, .Lcopy_unaligned_maybe_many; addli r4, r2, -256 } + +.Lcheck_aligned_copy_size: + /* If we are copying < 256 bytes, branch to simple case. */ + { blzt r4, .Lcopy_8_check; slti_u r8, r2, 8 } + + /* Copying >= 256 bytes, so jump to complex prefetching loop. */ + { andi r6, r1, 63; j .Lcopy_many } + +/* + * + * Aligned 4 byte at a time copy loop + * + */ + +.Lcopy_8_loop: + /* Copy two words at a time to hide load latency. */ +EX: { lw r3, r1; addi r1, r1, 4; slti_u r8, r2, 16 } +EX: { lw r4, r1; addi r1, r1, 4 } +EX: { sw r0, r3; addi r0, r0, 4; addi r2, r2, -4 } +EX: { sw r0, r4; addi r0, r0, 4; addi r2, r2, -4 } +.Lcopy_8_check: + { bzt r8, .Lcopy_8_loop; slti_u r4, r2, 4 } + + /* Copy odd leftover word, if any. */ + { bnzt r4, .Lcheck_odd_stragglers } +EX: { lw r3, r1; addi r1, r1, 4 } +EX: { sw r0, r3; addi r0, r0, 4; addi r2, r2, -4 } + +.Lcheck_odd_stragglers: + { bnz r2, .Lcopy_unaligned_few } + +.Ldone: + /* For memcpy return original dest address, else zero. */ + { mz r0, r29, r23; jrp lr } + + +/* + * + * Prefetching multiple cache line copy handler (for large transfers). + * + */ + + /* Copy words until r1 is cache-line-aligned. */ +.Lalign_loop: +EX: { lw r3, r1; addi r1, r1, 4 } + { andi r6, r1, 63 } +EX: { sw r0, r3; addi r0, r0, 4; addi r2, r2, -4 } +.Lcopy_many: + { bnzt r6, .Lalign_loop; addi r9, r0, 63 } + + { addi r3, r1, 60; andi r9, r9, -64 } + + /* No need to prefetch dst, we'll just do the wh64 + * right before we copy a line. + */ +EX: { lw r5, r3; addi r3, r3, 64; movei r4, 1 } + /* Intentionally stall for a few cycles to leave L2 cache alone. */ + { bnzt zero, .; move r27, lr } +EX: { lw r6, r3; addi r3, r3, 64 } + /* Intentionally stall for a few cycles to leave L2 cache alone. */ + { bnzt zero, . } +EX: { lw r7, r3; addi r3, r3, 64 } + /* Intentionally stall for a few cycles to leave L2 cache alone. */ + { bz zero, .Lbig_loop2 } + + /* On entry to this loop: + * - r0 points to the start of dst line 0 + * - r1 points to start of src line 0 + * - r2 >= (256 - 60), only the first time the loop trips. + * - r3 contains r1 + 128 + 60 [pointer to end of source line 2] + * This is our prefetch address. When we get near the end + * rather than prefetching off the end this is changed to point + * to some "safe" recently loaded address. + * - r5 contains *(r1 + 60) [i.e. last word of source line 0] + * - r6 contains *(r1 + 64 + 60) [i.e. last word of source line 1] + * - r9 contains ((r0 + 63) & -64) + * [start of next dst cache line.] + */ + +.Lbig_loop: + { jal .Lcopy_line2; add r15, r1, r2 } + +.Lbig_loop2: + /* Copy line 0, first stalling until r5 is ready. */ +EX: { move r12, r5; lw r16, r1 } + { bz r4, .Lcopy_8_check; slti_u r8, r2, 8 } + /* Prefetch several lines ahead. */ +EX: { lw r5, r3; addi r3, r3, 64 } + { jal .Lcopy_line } + + /* Copy line 1, first stalling until r6 is ready. */ +EX: { move r12, r6; lw r16, r1 } + { bz r4, .Lcopy_8_check; slti_u r8, r2, 8 } + /* Prefetch several lines ahead. */ +EX: { lw r6, r3; addi r3, r3, 64 } + { jal .Lcopy_line } + + /* Copy line 2, first stalling until r7 is ready. */ +EX: { move r12, r7; lw r16, r1 } + { bz r4, .Lcopy_8_check; slti_u r8, r2, 8 } + /* Prefetch several lines ahead. */ +EX: { lw r7, r3; addi r3, r3, 64 } + /* Use up a caches-busy cycle by jumping back to the top of the + * loop. Might as well get it out of the way now. + */ + { j .Lbig_loop } + + + /* On entry: + * - r0 points to the destination line. + * - r1 points to the source line. + * - r3 is the next prefetch address. + * - r9 holds the last address used for wh64. + * - r12 = WORD_15 + * - r16 = WORD_0. + * - r17 == r1 + 16. + * - r27 holds saved lr to restore. + * + * On exit: + * - r0 is incremented by 64. + * - r1 is incremented by 64, unless that would point to a word + * beyond the end of the source array, in which case it is redirected + * to point to an arbitrary word already in the cache. + * - r2 is decremented by 64. + * - r3 is unchanged, unless it points to a word beyond the + * end of the source array, in which case it is redirected + * to point to an arbitrary word already in the cache. + * Redirecting is OK since if we are that close to the end + * of the array we will not come back to this subroutine + * and use the contents of the prefetched address. + * - r4 is nonzero iff r2 >= 64. + * - r9 is incremented by 64, unless it points beyond the + * end of the last full destination cache line, in which + * case it is redirected to a "safe address" that can be + * clobbered (sp - 64) + * - lr contains the value in r27. + */ + +/* r26 unused */ + +.Lcopy_line: + /* TODO: when r3 goes past the end, we would like to redirect it + * to prefetch the last partial cache line (if any) just once, for the + * benefit of the final cleanup loop. But we don't want to + * prefetch that line more than once, or subsequent prefetches + * will go into the RTF. But then .Lbig_loop should unconditionally + * branch to top of loop to execute final prefetch, and its + * nop should become a conditional branch. + */ + + /* We need two non-memory cycles here to cover the resources + * used by the loads initiated by the caller. + */ + { add r15, r1, r2 } +.Lcopy_line2: + { slt_u r13, r3, r15; addi r17, r1, 16 } + + /* NOTE: this will stall for one cycle as L1 is busy. */ + + /* Fill second L1D line. */ +EX: { lw r17, r17; addi r1, r1, 48; mvz r3, r13, r1 } /* r17 = WORD_4 */ + + /* Prepare destination line for writing. */ +EX: { wh64 r9; addi r9, r9, 64 } + /* Load seven words that are L1D hits to cover wh64 L2 usage. */ + + /* Load the three remaining words from the last L1D line, which + * we know has already filled the L1D. + */ +EX: { lw r4, r1; addi r1, r1, 4; addi r20, r1, 16 } /* r4 = WORD_12 */ +EX: { lw r8, r1; addi r1, r1, 4; slt_u r13, r20, r15 }/* r8 = WORD_13 */ +EX: { lw r11, r1; addi r1, r1, -52; mvz r20, r13, r1 } /* r11 = WORD_14 */ + + /* Load the three remaining words from the first L1D line, first + * stalling until it has filled by "looking at" r16. + */ +EX: { lw r13, r1; addi r1, r1, 4; move zero, r16 } /* r13 = WORD_1 */ +EX: { lw r14, r1; addi r1, r1, 4 } /* r14 = WORD_2 */ +EX: { lw r15, r1; addi r1, r1, 8; addi r10, r0, 60 } /* r15 = WORD_3 */ + + /* Load second word from the second L1D line, first + * stalling until it has filled by "looking at" r17. + */ +EX: { lw r19, r1; addi r1, r1, 4; move zero, r17 } /* r19 = WORD_5 */ + + /* Store last word to the destination line, potentially dirtying it + * for the first time, which keeps the L2 busy for two cycles. + */ +EX: { sw r10, r12 } /* store(WORD_15) */ + + /* Use two L1D hits to cover the sw L2 access above. */ +EX: { lw r10, r1; addi r1, r1, 4 } /* r10 = WORD_6 */ +EX: { lw r12, r1; addi r1, r1, 4 } /* r12 = WORD_7 */ + + /* Fill third L1D line. */ +EX: { lw r18, r1; addi r1, r1, 4 } /* r18 = WORD_8 */ + + /* Store first L1D line. */ +EX: { sw r0, r16; addi r0, r0, 4; add r16, r0, r2 } /* store(WORD_0) */ +EX: { sw r0, r13; addi r0, r0, 4; andi r16, r16, -64 } /* store(WORD_1) */ +EX: { sw r0, r14; addi r0, r0, 4; slt_u r16, r9, r16 } /* store(WORD_2) */ +EX: { sw r0, r15; addi r0, r0, 4; addi r13, sp, -64 } /* store(WORD_3) */ + /* Store second L1D line. */ +EX: { sw r0, r17; addi r0, r0, 4; mvz r9, r16, r13 }/* store(WORD_4) */ +EX: { sw r0, r19; addi r0, r0, 4 } /* store(WORD_5) */ +EX: { sw r0, r10; addi r0, r0, 4 } /* store(WORD_6) */ +EX: { sw r0, r12; addi r0, r0, 4 } /* store(WORD_7) */ + +EX: { lw r13, r1; addi r1, r1, 4; move zero, r18 } /* r13 = WORD_9 */ +EX: { lw r14, r1; addi r1, r1, 4 } /* r14 = WORD_10 */ +EX: { lw r15, r1; move r1, r20 } /* r15 = WORD_11 */ + + /* Store third L1D line. */ +EX: { sw r0, r18; addi r0, r0, 4 } /* store(WORD_8) */ +EX: { sw r0, r13; addi r0, r0, 4 } /* store(WORD_9) */ +EX: { sw r0, r14; addi r0, r0, 4 } /* store(WORD_10) */ +EX: { sw r0, r15; addi r0, r0, 4 } /* store(WORD_11) */ + + /* Store rest of fourth L1D line. */ +EX: { sw r0, r4; addi r0, r0, 4 } /* store(WORD_12) */ + { +EX: sw r0, r8 /* store(WORD_13) */ + addi r0, r0, 4 + /* Will r2 be > 64 after we subtract 64 below? */ + shri r4, r2, 7 + } + { +EX: sw r0, r11 /* store(WORD_14) */ + addi r0, r0, 8 + /* Record 64 bytes successfully copied. */ + addi r2, r2, -64 + } + + { jrp lr; move lr, r27 } + + /* Convey to the backtrace library that the stack frame is size + * zero, and the real return address is on the stack rather than + * in 'lr'. + */ + { info 8 } + + .align 64 +.Lcopy_unaligned_maybe_many: + /* Skip the setup overhead if we aren't copying many bytes. */ + { slti_u r8, r2, 20; sub r4, zero, r0 } + { bnzt r8, .Lcopy_unaligned_few; andi r4, r4, 3 } + { bz r4, .Ldest_is_word_aligned; add r18, r1, r2 } + +/* + * + * unaligned 4 byte at a time copy handler. + * + */ + + /* Copy single bytes until r0 == 0 mod 4, so we can store words. */ +.Lalign_dest_loop: +EX: { lb_u r3, r1; addi r1, r1, 1; addi r4, r4, -1 } +EX: { sb r0, r3; addi r0, r0, 1; addi r2, r2, -1 } + { bnzt r4, .Lalign_dest_loop; andi r3, r1, 3 } + + /* If source and dest are now *both* aligned, do an aligned copy. */ + { bz r3, .Lcheck_aligned_copy_size; addli r4, r2, -256 } + +.Ldest_is_word_aligned: + +EX: { andi r8, r0, 63; lwadd_na r6, r1, 4} + { slti_u r9, r2, 64; bz r8, .Ldest_is_L2_line_aligned } + + /* This copies unaligned words until either there are fewer + * than 4 bytes left to copy, or until the destination pointer + * is cache-aligned, whichever comes first. + * + * On entry: + * - r0 is the next store address. + * - r1 points 4 bytes past the load address corresponding to r0. + * - r2 >= 4 + * - r6 is the next aligned word loaded. + */ +.Lcopy_unaligned_src_words: +EX: { lwadd_na r7, r1, 4; slti_u r8, r2, 4 + 4 } + /* stall */ + { dword_align r6, r7, r1; slti_u r9, r2, 64 + 4 } +EX: { swadd r0, r6, 4; addi r2, r2, -4 } + { bnz r8, .Lcleanup_unaligned_words; andi r8, r0, 63 } + { bnzt r8, .Lcopy_unaligned_src_words; move r6, r7 } + + /* On entry: + * - r0 is the next store address. + * - r1 points 4 bytes past the load address corresponding to r0. + * - r2 >= 4 (# of bytes left to store). + * - r6 is the next aligned src word value. + * - r9 = (r2 < 64U). + * - r18 points one byte past the end of source memory. + */ +.Ldest_is_L2_line_aligned: + + { + /* Not a full cache line remains. */ + bnz r9, .Lcleanup_unaligned_words + move r7, r6 + } + + /* r2 >= 64 */ + + /* Kick off two prefetches, but don't go past the end. */ + { addi r3, r1, 63 - 4; addi r8, r1, 64 + 63 - 4 } + { prefetch r3; move r3, r8; slt_u r8, r8, r18 } + { mvz r3, r8, r1; addi r8, r3, 64 } + { prefetch r3; move r3, r8; slt_u r8, r8, r18 } + { mvz r3, r8, r1; movei r17, 0 } + +.Lcopy_unaligned_line: + /* Prefetch another line. */ + { prefetch r3; addi r15, r1, 60; addi r3, r3, 64 } + /* Fire off a load of the last word we are about to copy. */ +EX: { lw_na r15, r15; slt_u r8, r3, r18 } + +EX: { mvz r3, r8, r1; wh64 r0 } + + /* This loop runs twice. + * + * On entry: + * - r17 is even before the first iteration, and odd before + * the second. It is incremented inside the loop. Encountering + * an even value at the end of the loop makes it stop. + */ +.Lcopy_half_an_unaligned_line: +EX: { + /* Stall until the last byte is ready. In the steady state this + * guarantees all words to load below will be in the L2 cache, which + * avoids shunting the loads to the RTF. + */ + move zero, r15 + lwadd_na r7, r1, 16 + } +EX: { lwadd_na r11, r1, 12 } +EX: { lwadd_na r14, r1, -24 } +EX: { lwadd_na r8, r1, 4 } +EX: { lwadd_na r9, r1, 4 } +EX: { + lwadd_na r10, r1, 8 + /* r16 = (r2 < 64), after we subtract 32 from r2 below. */ + slti_u r16, r2, 64 + 32 + } +EX: { lwadd_na r12, r1, 4; addi r17, r17, 1 } +EX: { lwadd_na r13, r1, 8; dword_align r6, r7, r1 } +EX: { swadd r0, r6, 4; dword_align r7, r8, r1 } +EX: { swadd r0, r7, 4; dword_align r8, r9, r1 } +EX: { swadd r0, r8, 4; dword_align r9, r10, r1 } +EX: { swadd r0, r9, 4; dword_align r10, r11, r1 } +EX: { swadd r0, r10, 4; dword_align r11, r12, r1 } +EX: { swadd r0, r11, 4; dword_align r12, r13, r1 } +EX: { swadd r0, r12, 4; dword_align r13, r14, r1 } +EX: { swadd r0, r13, 4; addi r2, r2, -32 } + { move r6, r14; bbst r17, .Lcopy_half_an_unaligned_line } + + { bzt r16, .Lcopy_unaligned_line; move r7, r6 } + + /* On entry: + * - r0 is the next store address. + * - r1 points 4 bytes past the load address corresponding to r0. + * - r2 >= 0 (# of bytes left to store). + * - r7 is the next aligned src word value. + */ +.Lcleanup_unaligned_words: + /* Handle any trailing bytes. */ + { bz r2, .Lcopy_unaligned_done; slti_u r8, r2, 4 } + { bzt r8, .Lcopy_unaligned_src_words; move r6, r7 } + + /* Move r1 back to the point where it corresponds to r0. */ + { addi r1, r1, -4 } + + /* Fall through */ + +/* + * + * 1 byte at a time copy handler. + * + */ + +.Lcopy_unaligned_few: +EX: { lb_u r3, r1; addi r1, r1, 1 } +EX: { sb r0, r3; addi r0, r0, 1; addi r2, r2, -1 } + { bnzt r2, .Lcopy_unaligned_few } + +.Lcopy_unaligned_done: + + /* For memcpy return original dest address, else zero. */ + { mz r0, r29, r23; jrp lr } + +.Lend_memcpy_common: + .size memcpy_common, .Lend_memcpy_common - memcpy_common + + .section .fixup,"ax" +memcpy_common_fixup: + .type memcpy_common_fixup, @function + + /* Skip any bytes we already successfully copied. + * r2 (num remaining) is correct, but r0 (dst) and r1 (src) + * may not be quite right because of unrolling and prefetching. + * So we need to recompute their values as the address just + * after the last byte we are sure was successfully loaded and + * then stored. + */ + + /* Determine how many bytes we successfully copied. */ + { sub r3, r25, r2 } + + /* Add this to the original r0 and r1 to get their new values. */ + { add r0, r23, r3; add r1, r24, r3 } + + { bzt r29, memcpy_fixup_loop } + { blzt r29, copy_to_user_fixup_loop } + +copy_from_user_fixup_loop: + /* Try copying the rest one byte at a time, expecting a load fault. */ +.Lcfu: { lb_u r3, r1; addi r1, r1, 1 } + { sb r0, r3; addi r0, r0, 1; addi r2, r2, -1 } + { bnzt r2, copy_from_user_fixup_loop } + +.Lcopy_from_user_fixup_zero_remainder: + { bbs r29, 2f } /* low bit set means IS_COPY_FROM_USER */ + /* byte-at-a-time loop faulted, so zero the rest. */ + { move r3, r2; bz r2, 2f /* should be impossible, but handle it. */ } +1: { sb r0, zero; addi r0, r0, 1; addi r3, r3, -1 } + { bnzt r3, 1b } +2: move lr, r27 + { move r0, r2; jrp lr } + +copy_to_user_fixup_loop: + /* Try copying the rest one byte at a time, expecting a store fault. */ + { lb_u r3, r1; addi r1, r1, 1 } +.Lctu: { sb r0, r3; addi r0, r0, 1; addi r2, r2, -1 } + { bnzt r2, copy_to_user_fixup_loop } +.Lcopy_to_user_fixup_done: + move lr, r27 + { move r0, r2; jrp lr } + +memcpy_fixup_loop: + /* Try copying the rest one byte at a time. We expect a disastrous + * fault to happen since we are in fixup code, but let it happen. + */ + { lb_u r3, r1; addi r1, r1, 1 } + { sb r0, r3; addi r0, r0, 1; addi r2, r2, -1 } + { bnzt r2, memcpy_fixup_loop } + /* This should be unreachable, we should have faulted again. + * But be paranoid and handle it in case some interrupt changed + * the TLB or something. + */ + move lr, r27 + { move r0, r23; jrp lr } + + .size memcpy_common_fixup, . - memcpy_common_fixup + + .section __ex_table,"a" + .align 4 + .word .Lcfu, .Lcopy_from_user_fixup_zero_remainder + .word .Lctu, .Lcopy_to_user_fixup_done diff --git a/arch/tile/lib/memcpy_64.c b/arch/tile/lib/memcpy_64.c new file mode 100644 index 000000000..4815354b8 --- /dev/null +++ b/arch/tile/lib/memcpy_64.c @@ -0,0 +1,367 @@ +/* + * Copyright 2011 Tilera Corporation. All Rights Reserved. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation, version 2. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or + * NON INFRINGEMENT. See the GNU General Public License for + * more details. + */ + +#include <linux/types.h> +#include <linux/string.h> +#include <linux/module.h> +/* EXPORT_SYMBOL() is in arch/tile/lib/exports.c since this should be asm. */ + +/* Must be 8 bytes in size. */ +#define op_t uint64_t + +/* Threshold value for when to enter the unrolled loops. */ +#define OP_T_THRES 16 + +#if CHIP_L2_LINE_SIZE() != 64 +#error "Assumes 64 byte line size" +#endif + +/* How many cache lines ahead should we prefetch? */ +#define PREFETCH_LINES_AHEAD 4 + +/* + * Provide "base versions" of load and store for the normal code path. + * The kernel provides other versions for userspace copies. + */ +#define ST(p, v) (*(p) = (v)) +#define LD(p) (*(p)) + +#ifndef USERCOPY_FUNC +#define ST1 ST +#define ST2 ST +#define ST4 ST +#define ST8 ST +#define LD1 LD +#define LD2 LD +#define LD4 LD +#define LD8 LD +#define RETVAL dstv +void *memcpy(void *__restrict dstv, const void *__restrict srcv, size_t n) +#else +/* + * Special kernel version will provide implementation of the LDn/STn + * macros to return a count of uncopied bytes due to mm fault. + */ +#define RETVAL 0 +int __attribute__((optimize("omit-frame-pointer"))) +USERCOPY_FUNC(void *__restrict dstv, const void *__restrict srcv, size_t n) +#endif +{ + char *__restrict dst1 = (char *)dstv; + const char *__restrict src1 = (const char *)srcv; + const char *__restrict src1_end; + const char *__restrict prefetch; + op_t *__restrict dst8; /* 8-byte pointer to destination memory. */ + op_t final; /* Final bytes to write to trailing word, if any */ + long i; + + if (n < 16) { + for (; n; n--) + ST1(dst1++, LD1(src1++)); + return RETVAL; + } + + /* + * Locate the end of source memory we will copy. Don't + * prefetch past this. + */ + src1_end = src1 + n - 1; + + /* Prefetch ahead a few cache lines, but not past the end. */ + prefetch = src1; + for (i = 0; i < PREFETCH_LINES_AHEAD; i++) { + __insn_prefetch(prefetch); + prefetch += CHIP_L2_LINE_SIZE(); + prefetch = (prefetch < src1_end) ? prefetch : src1; + } + + /* Copy bytes until dst is word-aligned. */ + for (; (uintptr_t)dst1 & (sizeof(op_t) - 1); n--) + ST1(dst1++, LD1(src1++)); + + /* 8-byte pointer to destination memory. */ + dst8 = (op_t *)dst1; + + if (__builtin_expect((uintptr_t)src1 & (sizeof(op_t) - 1), 0)) { + /* Unaligned copy. */ + + op_t tmp0 = 0, tmp1 = 0, tmp2, tmp3; + const op_t *src8 = (const op_t *) ((uintptr_t)src1 & + -sizeof(op_t)); + const void *srci = (void *)src1; + int m; + + m = (CHIP_L2_LINE_SIZE() << 2) - + (((uintptr_t)dst8) & ((CHIP_L2_LINE_SIZE() << 2) - 1)); + m = (n < m) ? n : m; + m /= sizeof(op_t); + + /* Copy until 'dst' is cache-line-aligned. */ + n -= (sizeof(op_t) * m); + + switch (m % 4) { + case 0: + if (__builtin_expect(!m, 0)) + goto _M0; + tmp1 = LD8(src8++); + tmp2 = LD8(src8++); + goto _8B3; + case 2: + m += 2; + tmp3 = LD8(src8++); + tmp0 = LD8(src8++); + goto _8B1; + case 3: + m += 1; + tmp2 = LD8(src8++); + tmp3 = LD8(src8++); + goto _8B2; + case 1: + m--; + tmp0 = LD8(src8++); + tmp1 = LD8(src8++); + if (__builtin_expect(!m, 0)) + goto _8B0; + } + + do { + tmp2 = LD8(src8++); + tmp0 = __insn_dblalign(tmp0, tmp1, srci); + ST8(dst8++, tmp0); +_8B3: + tmp3 = LD8(src8++); + tmp1 = __insn_dblalign(tmp1, tmp2, srci); + ST8(dst8++, tmp1); +_8B2: + tmp0 = LD8(src8++); + tmp2 = __insn_dblalign(tmp2, tmp3, srci); + ST8(dst8++, tmp2); +_8B1: + tmp1 = LD8(src8++); + tmp3 = __insn_dblalign(tmp3, tmp0, srci); + ST8(dst8++, tmp3); + m -= 4; + } while (m); + +_8B0: + tmp0 = __insn_dblalign(tmp0, tmp1, srci); + ST8(dst8++, tmp0); + src8--; + +_M0: + if (__builtin_expect(n >= CHIP_L2_LINE_SIZE(), 0)) { + op_t tmp4, tmp5, tmp6, tmp7, tmp8; + + prefetch = ((const char *)src8) + + CHIP_L2_LINE_SIZE() * PREFETCH_LINES_AHEAD; + + for (tmp0 = LD8(src8++); n >= CHIP_L2_LINE_SIZE(); + n -= CHIP_L2_LINE_SIZE()) { + /* Prefetch and advance to next line to + prefetch, but don't go past the end. */ + __insn_prefetch(prefetch); + + /* Make sure prefetch got scheduled + earlier. */ + __asm__ ("" : : : "memory"); + + prefetch += CHIP_L2_LINE_SIZE(); + prefetch = (prefetch < src1_end) ? prefetch : + (const char *) src8; + + tmp1 = LD8(src8++); + tmp2 = LD8(src8++); + tmp3 = LD8(src8++); + tmp4 = LD8(src8++); + tmp5 = LD8(src8++); + tmp6 = LD8(src8++); + tmp7 = LD8(src8++); + tmp8 = LD8(src8++); + + tmp0 = __insn_dblalign(tmp0, tmp1, srci); + tmp1 = __insn_dblalign(tmp1, tmp2, srci); + tmp2 = __insn_dblalign(tmp2, tmp3, srci); + tmp3 = __insn_dblalign(tmp3, tmp4, srci); + tmp4 = __insn_dblalign(tmp4, tmp5, srci); + tmp5 = __insn_dblalign(tmp5, tmp6, srci); + tmp6 = __insn_dblalign(tmp6, tmp7, srci); + tmp7 = __insn_dblalign(tmp7, tmp8, srci); + + __insn_wh64(dst8); + + ST8(dst8++, tmp0); + ST8(dst8++, tmp1); + ST8(dst8++, tmp2); + ST8(dst8++, tmp3); + ST8(dst8++, tmp4); + ST8(dst8++, tmp5); + ST8(dst8++, tmp6); + ST8(dst8++, tmp7); + + tmp0 = tmp8; + } + src8--; + } + + /* Copy the rest 8-byte chunks. */ + if (n >= sizeof(op_t)) { + tmp0 = LD8(src8++); + for (; n >= sizeof(op_t); n -= sizeof(op_t)) { + tmp1 = LD8(src8++); + tmp0 = __insn_dblalign(tmp0, tmp1, srci); + ST8(dst8++, tmp0); + tmp0 = tmp1; + } + src8--; + } + + if (n == 0) + return RETVAL; + + tmp0 = LD8(src8++); + tmp1 = ((const char *)src8 <= src1_end) + ? LD8((op_t *)src8) : 0; + final = __insn_dblalign(tmp0, tmp1, srci); + + } else { + /* Aligned copy. */ + + const op_t *__restrict src8 = (const op_t *)src1; + + /* src8 and dst8 are both word-aligned. */ + if (n >= CHIP_L2_LINE_SIZE()) { + /* Copy until 'dst' is cache-line-aligned. */ + for (; (uintptr_t)dst8 & (CHIP_L2_LINE_SIZE() - 1); + n -= sizeof(op_t)) + ST8(dst8++, LD8(src8++)); + + for (; n >= CHIP_L2_LINE_SIZE(); ) { + op_t tmp0, tmp1, tmp2, tmp3; + op_t tmp4, tmp5, tmp6, tmp7; + + /* + * Prefetch and advance to next line + * to prefetch, but don't go past the + * end. + */ + __insn_prefetch(prefetch); + + /* Make sure prefetch got scheduled + earlier. */ + __asm__ ("" : : : "memory"); + + prefetch += CHIP_L2_LINE_SIZE(); + prefetch = (prefetch < src1_end) ? prefetch : + (const char *)src8; + + /* + * Do all the loads before wh64. This + * is necessary if [src8, src8+7] and + * [dst8, dst8+7] share the same cache + * line and dst8 <= src8, as can be + * the case when called from memmove, + * or with code tested on x86 whose + * memcpy always works with forward + * copies. + */ + tmp0 = LD8(src8++); + tmp1 = LD8(src8++); + tmp2 = LD8(src8++); + tmp3 = LD8(src8++); + tmp4 = LD8(src8++); + tmp5 = LD8(src8++); + tmp6 = LD8(src8++); + tmp7 = LD8(src8++); + + /* wh64 and wait for tmp7 load completion. */ + __asm__ ("move %0, %0; wh64 %1\n" + : : "r"(tmp7), "r"(dst8)); + + ST8(dst8++, tmp0); + ST8(dst8++, tmp1); + ST8(dst8++, tmp2); + ST8(dst8++, tmp3); + ST8(dst8++, tmp4); + ST8(dst8++, tmp5); + ST8(dst8++, tmp6); + ST8(dst8++, tmp7); + + n -= CHIP_L2_LINE_SIZE(); + } +#if CHIP_L2_LINE_SIZE() != 64 +# error "Fix code that assumes particular L2 cache line size." +#endif + } + + for (; n >= sizeof(op_t); n -= sizeof(op_t)) + ST8(dst8++, LD8(src8++)); + + if (__builtin_expect(n == 0, 1)) + return RETVAL; + + final = LD8(src8); + } + + /* n != 0 if we get here. Write out any trailing bytes. */ + dst1 = (char *)dst8; +#ifndef __BIG_ENDIAN__ + if (n & 4) { + ST4((uint32_t *)dst1, final); + dst1 += 4; + final >>= 32; + n &= 3; + } + if (n & 2) { + ST2((uint16_t *)dst1, final); + dst1 += 2; + final >>= 16; + n &= 1; + } + if (n) + ST1((uint8_t *)dst1, final); +#else + if (n & 4) { + ST4((uint32_t *)dst1, final >> 32); + dst1 += 4; + } + else + { + final >>= 32; + } + if (n & 2) { + ST2((uint16_t *)dst1, final >> 16); + dst1 += 2; + } + else + { + final >>= 16; + } + if (n & 1) + ST1((uint8_t *)dst1, final >> 8); +#endif + + return RETVAL; +} + +#ifdef USERCOPY_FUNC +#undef ST1 +#undef ST2 +#undef ST4 +#undef ST8 +#undef LD1 +#undef LD2 +#undef LD4 +#undef LD8 +#undef USERCOPY_FUNC +#endif diff --git a/arch/tile/lib/memcpy_user_64.c b/arch/tile/lib/memcpy_user_64.c new file mode 100644 index 000000000..88c701649 --- /dev/null +++ b/arch/tile/lib/memcpy_user_64.c @@ -0,0 +1,94 @@ +/* + * Copyright 2011 Tilera Corporation. All Rights Reserved. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation, version 2. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or + * NON INFRINGEMENT. See the GNU General Public License for + * more details. + * + * Do memcpy(), but trap and return "n" when a load or store faults. + * + * Note: this idiom only works when memcpy() compiles to a leaf function. + * Here leaf function not only means it does not have calls, but also + * requires no stack operations (sp, stack frame pointer) and no + * use of callee-saved registers, else "jrp lr" will be incorrect since + * unwinding stack frame is bypassed. Since memcpy() is not complex so + * these conditions are satisfied here, but we need to be careful when + * modifying this file. This is not a clean solution but is the best + * one so far. + * + * Also note that we are capturing "n" from the containing scope here. + */ + +#define _ST(p, inst, v) \ + ({ \ + asm("1: " #inst " %0, %1;" \ + ".pushsection .coldtext.memcpy,\"ax\";" \ + "2: { move r0, %2; jrp lr };" \ + ".section __ex_table,\"a\";" \ + ".align 8;" \ + ".quad 1b, 2b;" \ + ".popsection" \ + : "=m" (*(p)) : "r" (v), "r" (n)); \ + }) + +#define _LD(p, inst) \ + ({ \ + unsigned long __v; \ + asm("1: " #inst " %0, %1;" \ + ".pushsection .coldtext.memcpy,\"ax\";" \ + "2: { move r0, %2; jrp lr };" \ + ".section __ex_table,\"a\";" \ + ".align 8;" \ + ".quad 1b, 2b;" \ + ".popsection" \ + : "=r" (__v) : "m" (*(p)), "r" (n)); \ + __v; \ + }) + +#define USERCOPY_FUNC __copy_to_user_inatomic +#define ST1(p, v) _ST((p), st1, (v)) +#define ST2(p, v) _ST((p), st2, (v)) +#define ST4(p, v) _ST((p), st4, (v)) +#define ST8(p, v) _ST((p), st, (v)) +#define LD1 LD +#define LD2 LD +#define LD4 LD +#define LD8 LD +#include "memcpy_64.c" + +#define USERCOPY_FUNC __copy_from_user_inatomic +#define ST1 ST +#define ST2 ST +#define ST4 ST +#define ST8 ST +#define LD1(p) _LD((p), ld1u) +#define LD2(p) _LD((p), ld2u) +#define LD4(p) _LD((p), ld4u) +#define LD8(p) _LD((p), ld) +#include "memcpy_64.c" + +#define USERCOPY_FUNC __copy_in_user_inatomic +#define ST1(p, v) _ST((p), st1, (v)) +#define ST2(p, v) _ST((p), st2, (v)) +#define ST4(p, v) _ST((p), st4, (v)) +#define ST8(p, v) _ST((p), st, (v)) +#define LD1(p) _LD((p), ld1u) +#define LD2(p) _LD((p), ld2u) +#define LD4(p) _LD((p), ld4u) +#define LD8(p) _LD((p), ld) +#include "memcpy_64.c" + +unsigned long __copy_from_user_zeroing(void *to, const void __user *from, + unsigned long n) +{ + unsigned long rc = __copy_from_user_inatomic(to, from, n); + if (unlikely(rc)) + memset(to + n - rc, 0, rc); + return rc; +} diff --git a/arch/tile/lib/memmove.c b/arch/tile/lib/memmove.c new file mode 100644 index 000000000..fd615ae6a --- /dev/null +++ b/arch/tile/lib/memmove.c @@ -0,0 +1,63 @@ +/* + * Copyright 2010 Tilera Corporation. All Rights Reserved. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation, version 2. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or + * NON INFRINGEMENT. See the GNU General Public License for + * more details. + */ + +#include <linux/types.h> +#include <linux/string.h> +#include <linux/module.h> + +void *memmove(void *dest, const void *src, size_t n) +{ + if ((const char *)src >= (char *)dest + n + || (char *)dest >= (const char *)src + n) { + /* We found no overlap, so let memcpy do all the heavy + * lifting (prefetching, etc.) + */ + return memcpy(dest, src, n); + } + + if (n != 0) { + const uint8_t *in; + uint8_t x; + uint8_t *out; + int stride; + + if (src < dest) { + /* copy backwards */ + in = (const uint8_t *)src + n - 1; + out = (uint8_t *)dest + n - 1; + stride = -1; + } else { + /* copy forwards */ + in = (const uint8_t *)src; + out = (uint8_t *)dest; + stride = 1; + } + + /* Manually software-pipeline this loop. */ + x = *in; + in += stride; + + while (--n != 0) { + *out = x; + out += stride; + x = *in; + in += stride; + } + + *out = x; + } + + return dest; +} +EXPORT_SYMBOL(memmove); diff --git a/arch/tile/lib/memset_32.c b/arch/tile/lib/memset_32.c new file mode 100644 index 000000000..2042bfe65 --- /dev/null +++ b/arch/tile/lib/memset_32.c @@ -0,0 +1,143 @@ +/* + * Copyright 2010 Tilera Corporation. All Rights Reserved. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation, version 2. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or + * NON INFRINGEMENT. See the GNU General Public License for + * more details. + */ + +#include <linux/types.h> +#include <linux/string.h> +#include <linux/module.h> +#include <arch/chip.h> + +void *memset(void *s, int c, size_t n) +{ + uint32_t *out32; + int n32; + uint32_t v16, v32; + uint8_t *out8 = s; + int to_align32; + + /* Experimentation shows that a trivial tight loop is a win up until + * around a size of 20, where writing a word at a time starts to win. + */ +#define BYTE_CUTOFF 20 + +#if BYTE_CUTOFF < 3 + /* This must be at least at least this big, or some code later + * on doesn't work. + */ +#error "BYTE_CUTOFF is too small" +#endif + + if (n < BYTE_CUTOFF) { + /* Strangely, this turns out to be the tightest way to + * write this loop. + */ + if (n != 0) { + do { + /* Strangely, combining these into one line + * performs worse. + */ + *out8 = c; + out8++; + } while (--n != 0); + } + + return s; + } + + /* Align 'out8'. We know n >= 3 so this won't write past the end. */ + while (((uintptr_t) out8 & 3) != 0) { + *out8++ = c; + --n; + } + + /* Align 'n'. */ + while (n & 3) + out8[--n] = c; + + out32 = (uint32_t *) out8; + n32 = n >> 2; + + /* Tile input byte out to 32 bits. */ + v16 = __insn_intlb(c, c); + v32 = __insn_intlh(v16, v16); + + /* This must be at least 8 or the following loop doesn't work. */ +#define CACHE_LINE_SIZE_IN_WORDS (CHIP_L2_LINE_SIZE() / 4) + + /* Determine how many words we need to emit before the 'out32' + * pointer becomes aligned modulo the cache line size. + */ + to_align32 = + (-((uintptr_t)out32 >> 2)) & (CACHE_LINE_SIZE_IN_WORDS - 1); + + /* Only bother aligning and using wh64 if there is at least + * one full cache line to process. This check also prevents + * overrunning the end of the buffer with alignment words. + */ + if (to_align32 <= n32 - CACHE_LINE_SIZE_IN_WORDS) { + int lines_left; + + /* Align out32 mod the cache line size so we can use wh64. */ + n32 -= to_align32; + for (; to_align32 != 0; to_align32--) { + *out32 = v32; + out32++; + } + + /* Use unsigned divide to turn this into a right shift. */ + lines_left = (unsigned)n32 / CACHE_LINE_SIZE_IN_WORDS; + + do { + /* Only wh64 a few lines at a time, so we don't + * exceed the maximum number of victim lines. + */ + int x = ((lines_left < CHIP_MAX_OUTSTANDING_VICTIMS()) + ? lines_left + : CHIP_MAX_OUTSTANDING_VICTIMS()); + uint32_t *wh = out32; + int i = x; + int j; + + lines_left -= x; + + do { + __insn_wh64(wh); + wh += CACHE_LINE_SIZE_IN_WORDS; + } while (--i); + + for (j = x * (CACHE_LINE_SIZE_IN_WORDS / 4); + j != 0; j--) { + *out32++ = v32; + *out32++ = v32; + *out32++ = v32; + *out32++ = v32; + } + } while (lines_left != 0); + + /* We processed all full lines above, so only this many + * words remain to be processed. + */ + n32 &= CACHE_LINE_SIZE_IN_WORDS - 1; + } + + /* Now handle any leftover values. */ + if (n32 != 0) { + do { + *out32 = v32; + out32++; + } while (--n32 != 0); + } + + return s; +} +EXPORT_SYMBOL(memset); diff --git a/arch/tile/lib/memset_64.c b/arch/tile/lib/memset_64.c new file mode 100644 index 000000000..03ef69cd7 --- /dev/null +++ b/arch/tile/lib/memset_64.c @@ -0,0 +1,142 @@ +/* + * Copyright 2011 Tilera Corporation. All Rights Reserved. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation, version 2. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or + * NON INFRINGEMENT. See the GNU General Public License for + * more details. + */ + +#include <linux/types.h> +#include <linux/string.h> +#include <linux/module.h> +#include <arch/chip.h> +#include "string-endian.h" + +void *memset(void *s, int c, size_t n) +{ + uint64_t *out64; + int n64, to_align64; + uint64_t v64; + uint8_t *out8 = s; + + /* Experimentation shows that a trivial tight loop is a win up until + * around a size of 20, where writing a word at a time starts to win. + */ +#define BYTE_CUTOFF 20 + +#if BYTE_CUTOFF < 7 + /* This must be at least at least this big, or some code later + * on doesn't work. + */ +#error "BYTE_CUTOFF is too small" +#endif + + if (n < BYTE_CUTOFF) { + /* Strangely, this turns out to be the tightest way to + * write this loop. + */ + if (n != 0) { + do { + /* Strangely, combining these into one line + * performs worse. + */ + *out8 = c; + out8++; + } while (--n != 0); + } + + return s; + } + + /* Align 'out8'. We know n >= 7 so this won't write past the end. */ + while (((uintptr_t) out8 & 7) != 0) { + *out8++ = c; + --n; + } + + /* Align 'n'. */ + while (n & 7) + out8[--n] = c; + + out64 = (uint64_t *) out8; + n64 = n >> 3; + + /* Tile input byte out to 64 bits. */ + v64 = copy_byte(c); + + /* This must be at least 8 or the following loop doesn't work. */ +#define CACHE_LINE_SIZE_IN_DOUBLEWORDS (CHIP_L2_LINE_SIZE() / 8) + + /* Determine how many words we need to emit before the 'out32' + * pointer becomes aligned modulo the cache line size. + */ + to_align64 = (-((uintptr_t)out64 >> 3)) & + (CACHE_LINE_SIZE_IN_DOUBLEWORDS - 1); + + /* Only bother aligning and using wh64 if there is at least + * one full cache line to process. This check also prevents + * overrunning the end of the buffer with alignment words. + */ + if (to_align64 <= n64 - CACHE_LINE_SIZE_IN_DOUBLEWORDS) { + int lines_left; + + /* Align out64 mod the cache line size so we can use wh64. */ + n64 -= to_align64; + for (; to_align64 != 0; to_align64--) { + *out64 = v64; + out64++; + } + + /* Use unsigned divide to turn this into a right shift. */ + lines_left = (unsigned)n64 / CACHE_LINE_SIZE_IN_DOUBLEWORDS; + + do { + /* Only wh64 a few lines at a time, so we don't + * exceed the maximum number of victim lines. + */ + int x = ((lines_left < CHIP_MAX_OUTSTANDING_VICTIMS()) + ? lines_left + : CHIP_MAX_OUTSTANDING_VICTIMS()); + uint64_t *wh = out64; + int i = x; + int j; + + lines_left -= x; + + do { + __insn_wh64(wh); + wh += CACHE_LINE_SIZE_IN_DOUBLEWORDS; + } while (--i); + + for (j = x * (CACHE_LINE_SIZE_IN_DOUBLEWORDS / 4); + j != 0; j--) { + *out64++ = v64; + *out64++ = v64; + *out64++ = v64; + *out64++ = v64; + } + } while (lines_left != 0); + + /* We processed all full lines above, so only this many + * words remain to be processed. + */ + n64 &= CACHE_LINE_SIZE_IN_DOUBLEWORDS - 1; + } + + /* Now handle any leftover values. */ + if (n64 != 0) { + do { + *out64 = v64; + out64++; + } while (--n64 != 0); + } + + return s; +} +EXPORT_SYMBOL(memset); diff --git a/arch/tile/lib/spinlock_32.c b/arch/tile/lib/spinlock_32.c new file mode 100644 index 000000000..b34f79aad --- /dev/null +++ b/arch/tile/lib/spinlock_32.c @@ -0,0 +1,259 @@ +/* + * Copyright 2010 Tilera Corporation. All Rights Reserved. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation, version 2. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or + * NON INFRINGEMENT. See the GNU General Public License for + * more details. + */ + +#include <linux/spinlock.h> +#include <linux/module.h> +#include <asm/processor.h> +#include <arch/spr_def.h> + +#include "spinlock_common.h" + +void arch_spin_lock(arch_spinlock_t *lock) +{ + int my_ticket; + int iterations = 0; + int delta; + + while ((my_ticket = __insn_tns((void *)&lock->next_ticket)) & 1) + delay_backoff(iterations++); + + /* Increment the next ticket number, implicitly releasing tns lock. */ + lock->next_ticket = my_ticket + TICKET_QUANTUM; + + /* Wait until it's our turn. */ + while ((delta = my_ticket - lock->current_ticket) != 0) + relax((128 / CYCLES_PER_RELAX_LOOP) * delta); +} +EXPORT_SYMBOL(arch_spin_lock); + +int arch_spin_trylock(arch_spinlock_t *lock) +{ + /* + * Grab a ticket; no need to retry if it's busy, we'll just + * treat that the same as "locked", since someone else + * will lock it momentarily anyway. + */ + int my_ticket = __insn_tns((void *)&lock->next_ticket); + + if (my_ticket == lock->current_ticket) { + /* Not currently locked, so lock it by keeping this ticket. */ + lock->next_ticket = my_ticket + TICKET_QUANTUM; + /* Success! */ + return 1; + } + + if (!(my_ticket & 1)) { + /* Release next_ticket. */ + lock->next_ticket = my_ticket; + } + + return 0; +} +EXPORT_SYMBOL(arch_spin_trylock); + +void arch_spin_unlock_wait(arch_spinlock_t *lock) +{ + u32 iterations = 0; + while (arch_spin_is_locked(lock)) + delay_backoff(iterations++); +} +EXPORT_SYMBOL(arch_spin_unlock_wait); + +/* + * The low byte is always reserved to be the marker for a "tns" operation + * since the low bit is set to "1" by a tns. The next seven bits are + * zeroes. The next byte holds the "next" writer value, i.e. the ticket + * available for the next task that wants to write. The third byte holds + * the current writer value, i.e. the writer who holds the current ticket. + * If current == next == 0, there are no interested writers. + */ +#define WR_NEXT_SHIFT _WR_NEXT_SHIFT +#define WR_CURR_SHIFT _WR_CURR_SHIFT +#define WR_WIDTH _WR_WIDTH +#define WR_MASK ((1 << WR_WIDTH) - 1) + +/* + * The last eight bits hold the active reader count. This has to be + * zero before a writer can start to write. + */ +#define RD_COUNT_SHIFT _RD_COUNT_SHIFT +#define RD_COUNT_WIDTH _RD_COUNT_WIDTH +#define RD_COUNT_MASK ((1 << RD_COUNT_WIDTH) - 1) + + +/* + * We can get the read lock if everything but the reader bits (which + * are in the high part of the word) is zero, i.e. no active or + * waiting writers, no tns. + * + * We guard the tns/store-back with an interrupt critical section to + * preserve the semantic that the same read lock can be acquired in an + * interrupt context. + */ +int arch_read_trylock(arch_rwlock_t *rwlock) +{ + u32 val; + __insn_mtspr(SPR_INTERRUPT_CRITICAL_SECTION, 1); + val = __insn_tns((int *)&rwlock->lock); + if (likely((val << _RD_COUNT_WIDTH) == 0)) { + val += 1 << RD_COUNT_SHIFT; + rwlock->lock = val; + __insn_mtspr(SPR_INTERRUPT_CRITICAL_SECTION, 0); + BUG_ON(val == 0); /* we don't expect wraparound */ + return 1; + } + if ((val & 1) == 0) + rwlock->lock = val; + __insn_mtspr(SPR_INTERRUPT_CRITICAL_SECTION, 0); + return 0; +} +EXPORT_SYMBOL(arch_read_trylock); + +/* + * Spin doing arch_read_trylock() until we acquire the lock. + * ISSUE: This approach can permanently starve readers. A reader who sees + * a writer could instead take a ticket lock (just like a writer would), + * and atomically enter read mode (with 1 reader) when it gets the ticket. + * This way both readers and writers would always make forward progress + * in a finite time. + */ +void arch_read_lock(arch_rwlock_t *rwlock) +{ + u32 iterations = 0; + while (unlikely(!arch_read_trylock(rwlock))) + delay_backoff(iterations++); +} +EXPORT_SYMBOL(arch_read_lock); + +void arch_read_unlock(arch_rwlock_t *rwlock) +{ + u32 val, iterations = 0; + + mb(); /* guarantee anything modified under the lock is visible */ + for (;;) { + __insn_mtspr(SPR_INTERRUPT_CRITICAL_SECTION, 1); + val = __insn_tns((int *)&rwlock->lock); + if (likely((val & 1) == 0)) { + rwlock->lock = val - (1 << _RD_COUNT_SHIFT); + __insn_mtspr(SPR_INTERRUPT_CRITICAL_SECTION, 0); + break; + } + __insn_mtspr(SPR_INTERRUPT_CRITICAL_SECTION, 0); + delay_backoff(iterations++); + } +} +EXPORT_SYMBOL(arch_read_unlock); + +/* + * We don't need an interrupt critical section here (unlike for + * arch_read_lock) since we should never use a bare write lock where + * it could be interrupted by code that could try to re-acquire it. + */ +void arch_write_lock(arch_rwlock_t *rwlock) +{ + /* + * The trailing underscore on this variable (and curr_ below) + * reminds us that the high bits are garbage; we mask them out + * when we compare them. + */ + u32 my_ticket_; + u32 iterations = 0; + u32 val = __insn_tns((int *)&rwlock->lock); + + if (likely(val == 0)) { + rwlock->lock = 1 << _WR_NEXT_SHIFT; + return; + } + + /* + * Wait until there are no readers, then bump up the next + * field and capture the ticket value. + */ + for (;;) { + if (!(val & 1)) { + if ((val >> RD_COUNT_SHIFT) == 0) + break; + rwlock->lock = val; + } + delay_backoff(iterations++); + val = __insn_tns((int *)&rwlock->lock); + } + + /* Take out the next ticket and extract my ticket value. */ + rwlock->lock = __insn_addb(val, 1 << WR_NEXT_SHIFT); + my_ticket_ = val >> WR_NEXT_SHIFT; + + /* Wait until the "current" field matches our ticket. */ + for (;;) { + u32 curr_ = val >> WR_CURR_SHIFT; + u32 delta = ((my_ticket_ - curr_) & WR_MASK); + if (likely(delta == 0)) + break; + + /* Delay based on how many lock-holders are still out there. */ + relax((256 / CYCLES_PER_RELAX_LOOP) * delta); + + /* + * Get a non-tns value to check; we don't need to tns + * it ourselves. Since we're not tns'ing, we retry + * more rapidly to get a valid value. + */ + while ((val = rwlock->lock) & 1) + relax(4); + } +} +EXPORT_SYMBOL(arch_write_lock); + +int arch_write_trylock(arch_rwlock_t *rwlock) +{ + u32 val = __insn_tns((int *)&rwlock->lock); + + /* + * If a tns is in progress, or there's a waiting or active locker, + * or active readers, we can't take the lock, so give up. + */ + if (unlikely(val != 0)) { + if (!(val & 1)) + rwlock->lock = val; + return 0; + } + + /* Set the "next" field to mark it locked. */ + rwlock->lock = 1 << _WR_NEXT_SHIFT; + return 1; +} +EXPORT_SYMBOL(arch_write_trylock); + +void arch_write_unlock(arch_rwlock_t *rwlock) +{ + u32 val, eq, mask; + + mb(); /* guarantee anything modified under the lock is visible */ + val = __insn_tns((int *)&rwlock->lock); + if (likely(val == (1 << _WR_NEXT_SHIFT))) { + rwlock->lock = 0; + return; + } + while (unlikely(val & 1)) { + /* Limited backoff since we are the highest-priority task. */ + relax(4); + val = __insn_tns((int *)&rwlock->lock); + } + mask = 1 << WR_CURR_SHIFT; + val = __insn_addb(val, mask); + eq = __insn_seqb(val, val << (WR_CURR_SHIFT - WR_NEXT_SHIFT)); + val = __insn_mz(eq & mask, val); + rwlock->lock = val; +} +EXPORT_SYMBOL(arch_write_unlock); diff --git a/arch/tile/lib/spinlock_64.c b/arch/tile/lib/spinlock_64.c new file mode 100644 index 000000000..d6fb9581e --- /dev/null +++ b/arch/tile/lib/spinlock_64.c @@ -0,0 +1,104 @@ +/* + * Copyright 2011 Tilera Corporation. All Rights Reserved. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation, version 2. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or + * NON INFRINGEMENT. See the GNU General Public License for + * more details. + */ + +#include <linux/spinlock.h> +#include <linux/module.h> +#include <asm/processor.h> + +#include "spinlock_common.h" + +/* + * Read the spinlock value without allocating in our cache and without + * causing an invalidation to another cpu with a copy of the cacheline. + * This is important when we are spinning waiting for the lock. + */ +static inline u32 arch_spin_read_noalloc(void *lock) +{ + return atomic_cmpxchg((atomic_t *)lock, -1, -1); +} + +/* + * Wait until the high bits (current) match my ticket. + * If we notice the overflow bit set on entry, we clear it. + */ +void arch_spin_lock_slow(arch_spinlock_t *lock, u32 my_ticket) +{ + if (unlikely(my_ticket & __ARCH_SPIN_NEXT_OVERFLOW)) { + __insn_fetchand4(&lock->lock, ~__ARCH_SPIN_NEXT_OVERFLOW); + my_ticket &= ~__ARCH_SPIN_NEXT_OVERFLOW; + } + + for (;;) { + u32 val = arch_spin_read_noalloc(lock); + u32 delta = my_ticket - arch_spin_current(val); + if (delta == 0) + return; + relax((128 / CYCLES_PER_RELAX_LOOP) * delta); + } +} +EXPORT_SYMBOL(arch_spin_lock_slow); + +/* + * Check the lock to see if it is plausible, and try to get it with cmpxchg(). + */ +int arch_spin_trylock(arch_spinlock_t *lock) +{ + u32 val = arch_spin_read_noalloc(lock); + if (unlikely(arch_spin_current(val) != arch_spin_next(val))) + return 0; + return cmpxchg(&lock->lock, val, (val + 1) & ~__ARCH_SPIN_NEXT_OVERFLOW) + == val; +} +EXPORT_SYMBOL(arch_spin_trylock); + +void arch_spin_unlock_wait(arch_spinlock_t *lock) +{ + u32 iterations = 0; + while (arch_spin_is_locked(lock)) + delay_backoff(iterations++); +} +EXPORT_SYMBOL(arch_spin_unlock_wait); + +/* + * If the read lock fails due to a writer, we retry periodically + * until the value is positive and we write our incremented reader count. + */ +void __read_lock_failed(arch_rwlock_t *rw) +{ + u32 val; + int iterations = 0; + do { + delay_backoff(iterations++); + val = __insn_fetchaddgez4(&rw->lock, 1); + } while (unlikely(arch_write_val_locked(val))); +} +EXPORT_SYMBOL(__read_lock_failed); + +/* + * If we failed because there were readers, clear the "writer" bit + * so we don't block additional readers. Otherwise, there was another + * writer anyway, so our "fetchor" made no difference. Then wait, + * issuing periodic fetchor instructions, till we get the lock. + */ +void __write_lock_failed(arch_rwlock_t *rw, u32 val) +{ + int iterations = 0; + do { + if (!arch_write_val_locked(val)) + val = __insn_fetchand4(&rw->lock, ~__WRITE_LOCK_BIT); + delay_backoff(iterations++); + val = __insn_fetchor4(&rw->lock, __WRITE_LOCK_BIT); + } while (val != 0); +} +EXPORT_SYMBOL(__write_lock_failed); diff --git a/arch/tile/lib/spinlock_common.h b/arch/tile/lib/spinlock_common.h new file mode 100644 index 000000000..6ac37509f --- /dev/null +++ b/arch/tile/lib/spinlock_common.h @@ -0,0 +1,64 @@ +/* + * Copyright 2010 Tilera Corporation. All Rights Reserved. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation, version 2. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or + * NON INFRINGEMENT. See the GNU General Public License for + * more details. + * This file is included into spinlock_32.c or _64.c. + */ + +/* + * The mfspr in __spinlock_relax() is 5 or 6 cycles plus 2 for loop + * overhead. + */ +#ifdef __tilegx__ +#define CYCLES_PER_RELAX_LOOP 7 +#else +#define CYCLES_PER_RELAX_LOOP 8 +#endif + +/* + * Idle the core for CYCLES_PER_RELAX_LOOP * iterations cycles. + */ +static inline void +relax(int iterations) +{ + for (/*above*/; iterations > 0; iterations--) + __insn_mfspr(SPR_PASS); + barrier(); +} + +/* Perform bounded exponential backoff.*/ +static void delay_backoff(int iterations) +{ + u32 exponent, loops; + + /* + * 2^exponent is how many times we go around the loop, + * which takes 8 cycles. We want to start with a 16- to 31-cycle + * loop, so we need to go around minimum 2 = 2^1 times, so we + * bias the original value up by 1. + */ + exponent = iterations + 1; + + /* + * Don't allow exponent to exceed 7, so we have 128 loops, + * or 1,024 (to 2,047) cycles, as our maximum. + */ + if (exponent > 8) + exponent = 8; + + loops = 1 << exponent; + + /* Add a randomness factor so two cpus never get in lock step. */ + loops += __insn_crc32_32(stack_pointer, get_cycles_low()) & + (loops - 1); + + relax(loops); +} diff --git a/arch/tile/lib/strchr_32.c b/arch/tile/lib/strchr_32.c new file mode 100644 index 000000000..841fe6963 --- /dev/null +++ b/arch/tile/lib/strchr_32.c @@ -0,0 +1,64 @@ +/* + * Copyright 2010 Tilera Corporation. All Rights Reserved. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation, version 2. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or + * NON INFRINGEMENT. See the GNU General Public License for + * more details. + */ + +#include <linux/types.h> +#include <linux/string.h> +#include <linux/module.h> + +char *strchr(const char *s, int c) +{ + int z, g; + + /* Get an aligned pointer. */ + const uintptr_t s_int = (uintptr_t) s; + const uint32_t *p = (const uint32_t *)(s_int & -4); + + /* Create four copies of the byte for which we are looking. */ + const uint32_t goal = 0x01010101 * (uint8_t) c; + + /* Read the first aligned word, but force bytes before the string to + * match neither zero nor goal (we make sure the high bit of each + * byte is 1, and the low 7 bits are all the opposite of the goal + * byte). + * + * Note that this shift count expression works because we know shift + * counts are taken mod 32. + */ + const uint32_t before_mask = (1 << (s_int << 3)) - 1; + uint32_t v = (*p | before_mask) ^ (goal & __insn_shrib(before_mask, 1)); + + uint32_t zero_matches, goal_matches; + while (1) { + /* Look for a terminating '\0'. */ + zero_matches = __insn_seqb(v, 0); + + /* Look for the goal byte. */ + goal_matches = __insn_seqb(v, goal); + + if (__builtin_expect(zero_matches | goal_matches, 0)) + break; + + v = *++p; + } + + z = __insn_ctz(zero_matches); + g = __insn_ctz(goal_matches); + + /* If we found c before '\0' we got a match. Note that if c == '\0' + * then g == z, and we correctly return the address of the '\0' + * rather than NULL. + */ + return (g <= z) ? ((char *)p) + (g >> 3) : NULL; +} +EXPORT_SYMBOL(strchr); diff --git a/arch/tile/lib/strchr_64.c b/arch/tile/lib/strchr_64.c new file mode 100644 index 000000000..fe6e31c06 --- /dev/null +++ b/arch/tile/lib/strchr_64.c @@ -0,0 +1,62 @@ +/* + * Copyright 2011 Tilera Corporation. All Rights Reserved. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation, version 2. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or + * NON INFRINGEMENT. See the GNU General Public License for + * more details. + */ + +#include <linux/types.h> +#include <linux/string.h> +#include <linux/module.h> +#include "string-endian.h" + +char *strchr(const char *s, int c) +{ + int z, g; + + /* Get an aligned pointer. */ + const uintptr_t s_int = (uintptr_t) s; + const uint64_t *p = (const uint64_t *)(s_int & -8); + + /* Create eight copies of the byte for which we are looking. */ + const uint64_t goal = copy_byte(c); + + /* Read the first aligned word, but force bytes before the string to + * match neither zero nor goal (we make sure the high bit of each + * byte is 1, and the low 7 bits are all the opposite of the goal + * byte). + */ + const uint64_t before_mask = MASK(s_int); + uint64_t v = (*p | before_mask) ^ (goal & __insn_v1shrui(before_mask, 1)); + + uint64_t zero_matches, goal_matches; + while (1) { + /* Look for a terminating '\0'. */ + zero_matches = __insn_v1cmpeqi(v, 0); + + /* Look for the goal byte. */ + goal_matches = __insn_v1cmpeq(v, goal); + + if (__builtin_expect((zero_matches | goal_matches) != 0, 0)) + break; + + v = *++p; + } + + z = CFZ(zero_matches); + g = CFZ(goal_matches); + + /* If we found c before '\0' we got a match. Note that if c == '\0' + * then g == z, and we correctly return the address of the '\0' + * rather than NULL. + */ + return (g <= z) ? ((char *)p) + (g >> 3) : NULL; +} +EXPORT_SYMBOL(strchr); diff --git a/arch/tile/lib/string-endian.h b/arch/tile/lib/string-endian.h new file mode 100644 index 000000000..2e49cbfe9 --- /dev/null +++ b/arch/tile/lib/string-endian.h @@ -0,0 +1,44 @@ +/* + * Copyright 2013 Tilera Corporation. All Rights Reserved. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation, version 2. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or + * NON INFRINGEMENT. See the GNU General Public License for + * more details. + * + * Provide a mask based on the pointer alignment that + * sets up non-zero bytes before the beginning of the string. + * The MASK expression works because shift counts are taken mod 64. + * Also, specify how to count "first" and "last" bits + * when the bits have been read as a word. + */ + +#include <asm/byteorder.h> + +#ifdef __LITTLE_ENDIAN +#define MASK(x) (__insn_shl(1ULL, (x << 3)) - 1) +#define NULMASK(x) ((2ULL << x) - 1) +#define CFZ(x) __insn_ctz(x) +#define REVCZ(x) __insn_clz(x) +#else +#define MASK(x) (__insn_shl(-2LL, ((-x << 3) - 1))) +#define NULMASK(x) (-2LL << (63 - x)) +#define CFZ(x) __insn_clz(x) +#define REVCZ(x) __insn_ctz(x) +#endif + +/* + * Create eight copies of the byte in a uint64_t. Byte Shuffle uses + * the bytes of srcB as the index into the dest vector to select a + * byte. With all indices of zero, the first byte is copied into all + * the other bytes. + */ +static inline uint64_t copy_byte(uint8_t byte) +{ + return __insn_shufflebytes(byte, 0, 0); +} diff --git a/arch/tile/lib/strlen_32.c b/arch/tile/lib/strlen_32.c new file mode 100644 index 000000000..f26f88e11 --- /dev/null +++ b/arch/tile/lib/strlen_32.c @@ -0,0 +1,36 @@ +/* + * Copyright 2010 Tilera Corporation. All Rights Reserved. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation, version 2. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or + * NON INFRINGEMENT. See the GNU General Public License for + * more details. + */ + +#include <linux/types.h> +#include <linux/string.h> +#include <linux/module.h> + +size_t strlen(const char *s) +{ + /* Get an aligned pointer. */ + const uintptr_t s_int = (uintptr_t) s; + const uint32_t *p = (const uint32_t *)(s_int & -4); + + /* Read the first word, but force bytes before the string to be nonzero. + * This expression works because we know shift counts are taken mod 32. + */ + uint32_t v = *p | ((1 << (s_int << 3)) - 1); + + uint32_t bits; + while ((bits = __insn_seqb(v, 0)) == 0) + v = *++p; + + return ((const char *)p) + (__insn_ctz(bits) >> 3) - s; +} +EXPORT_SYMBOL(strlen); diff --git a/arch/tile/lib/strlen_64.c b/arch/tile/lib/strlen_64.c new file mode 100644 index 000000000..9583fc336 --- /dev/null +++ b/arch/tile/lib/strlen_64.c @@ -0,0 +1,35 @@ +/* + * Copyright 2011 Tilera Corporation. All Rights Reserved. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation, version 2. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or + * NON INFRINGEMENT. See the GNU General Public License for + * more details. + */ + +#include <linux/types.h> +#include <linux/string.h> +#include <linux/module.h> +#include "string-endian.h" + +size_t strlen(const char *s) +{ + /* Get an aligned pointer. */ + const uintptr_t s_int = (uintptr_t) s; + const uint64_t *p = (const uint64_t *)(s_int & -8); + + /* Read and MASK the first word. */ + uint64_t v = *p | MASK(s_int); + + uint64_t bits; + while ((bits = __insn_v1cmpeqi(v, 0)) == 0) + v = *++p; + + return ((const char *)p) + (CFZ(bits) >> 3) - s; +} +EXPORT_SYMBOL(strlen); diff --git a/arch/tile/lib/strnlen_32.c b/arch/tile/lib/strnlen_32.c new file mode 100644 index 000000000..1434141d9 --- /dev/null +++ b/arch/tile/lib/strnlen_32.c @@ -0,0 +1,47 @@ +/* + * Copyright 2013 Tilera Corporation. All Rights Reserved. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation, version 2. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or + * NON INFRINGEMENT. See the GNU General Public License for + * more details. + */ + +#include <linux/types.h> +#include <linux/string.h> +#include <linux/module.h> + +size_t strnlen(const char *s, size_t count) +{ + /* Get an aligned pointer. */ + const uintptr_t s_int = (uintptr_t) s; + const uint32_t *p = (const uint32_t *)(s_int & -4); + size_t bytes_read = sizeof(*p) - (s_int & (sizeof(*p) - 1)); + size_t len; + uint32_t v, bits; + + /* Avoid page fault risk by not reading any bytes when count is 0. */ + if (count == 0) + return 0; + + /* Read first word, but force bytes before the string to be nonzero. */ + v = *p | ((1 << ((s_int << 3) & 31)) - 1); + + while ((bits = __insn_seqb(v, 0)) == 0) { + if (bytes_read >= count) { + /* Read COUNT bytes and didn't find the terminator. */ + return count; + } + v = *++p; + bytes_read += sizeof(v); + } + + len = ((const char *) p) + (__insn_ctz(bits) >> 3) - s; + return (len < count ? len : count); +} +EXPORT_SYMBOL(strnlen); diff --git a/arch/tile/lib/strnlen_64.c b/arch/tile/lib/strnlen_64.c new file mode 100644 index 000000000..2e8de6a51 --- /dev/null +++ b/arch/tile/lib/strnlen_64.c @@ -0,0 +1,48 @@ +/* + * Copyright 2013 Tilera Corporation. All Rights Reserved. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation, version 2. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or + * NON INFRINGEMENT. See the GNU General Public License for + * more details. + */ + +#include <linux/types.h> +#include <linux/string.h> +#include <linux/module.h> +#include "string-endian.h" + +size_t strnlen(const char *s, size_t count) +{ + /* Get an aligned pointer. */ + const uintptr_t s_int = (uintptr_t) s; + const uint64_t *p = (const uint64_t *)(s_int & -8); + size_t bytes_read = sizeof(*p) - (s_int & (sizeof(*p) - 1)); + size_t len; + uint64_t v, bits; + + /* Avoid page fault risk by not reading any bytes when count is 0. */ + if (count == 0) + return 0; + + /* Read and MASK the first word. */ + v = *p | MASK(s_int); + + while ((bits = __insn_v1cmpeqi(v, 0)) == 0) { + if (bytes_read >= count) { + /* Read COUNT bytes and didn't find the terminator. */ + return count; + } + v = *++p; + bytes_read += sizeof(v); + } + + len = ((const char *) p) + (CFZ(bits) >> 3) - s; + return (len < count ? len : count); +} +EXPORT_SYMBOL(strnlen); diff --git a/arch/tile/lib/uaccess.c b/arch/tile/lib/uaccess.c new file mode 100644 index 000000000..030abe3ee --- /dev/null +++ b/arch/tile/lib/uaccess.c @@ -0,0 +1,24 @@ +/* + * Copyright 2010 Tilera Corporation. All Rights Reserved. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation, version 2. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or + * NON INFRINGEMENT. See the GNU General Public License for + * more details. + */ + +#include <linux/uaccess.h> +#include <linux/module.h> + +int __range_ok(unsigned long addr, unsigned long size) +{ + unsigned long limit = current_thread_info()->addr_limit.seg; + return !((addr < limit && size <= limit - addr) || + is_arch_mappable_range(addr, size)); +} +EXPORT_SYMBOL(__range_ok); diff --git a/arch/tile/lib/usercopy_32.S b/arch/tile/lib/usercopy_32.S new file mode 100644 index 000000000..1bc162224 --- /dev/null +++ b/arch/tile/lib/usercopy_32.S @@ -0,0 +1,135 @@ +/* + * Copyright 2010 Tilera Corporation. All Rights Reserved. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation, version 2. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or + * NON INFRINGEMENT. See the GNU General Public License for + * more details. + */ + +#include <linux/linkage.h> +#include <asm/errno.h> +#include <asm/cache.h> +#include <arch/chip.h> + +/* Access user memory, but use MMU to avoid propagating kernel exceptions. */ + +/* + * strnlen_user_asm takes the pointer in r0, and the length bound in r1. + * It returns the length, including the terminating NUL, or zero on exception. + * If length is greater than the bound, returns one plus the bound. + */ +STD_ENTRY(strnlen_user_asm) + { bz r1, 2f; addi r3, r0, -1 } /* bias down to include NUL */ +1: { lb_u r4, r0; addi r1, r1, -1 } + bz r4, 2f + { bnzt r1, 1b; addi r0, r0, 1 } +2: { sub r0, r0, r3; jrp lr } + STD_ENDPROC(strnlen_user_asm) + .pushsection .fixup,"ax" +strnlen_user_fault: + { move r0, zero; jrp lr } + ENDPROC(strnlen_user_fault) + .section __ex_table,"a" + .align 4 + .word 1b, strnlen_user_fault + .popsection + +/* + * strncpy_from_user_asm takes the kernel target pointer in r0, + * the userspace source pointer in r1, and the length bound (including + * the trailing NUL) in r2. On success, it returns the string length + * (not including the trailing NUL), or -EFAULT on failure. + */ +STD_ENTRY(strncpy_from_user_asm) + { bz r2, 2f; move r3, r0 } +1: { lb_u r4, r1; addi r1, r1, 1; addi r2, r2, -1 } + { sb r0, r4; addi r0, r0, 1 } + bz r4, 2f + bnzt r2, 1b + { sub r0, r0, r3; jrp lr } +2: addi r0, r0, -1 /* don't count the trailing NUL */ + { sub r0, r0, r3; jrp lr } + STD_ENDPROC(strncpy_from_user_asm) + .pushsection .fixup,"ax" +strncpy_from_user_fault: + { movei r0, -EFAULT; jrp lr } + ENDPROC(strncpy_from_user_fault) + .section __ex_table,"a" + .align 4 + .word 1b, strncpy_from_user_fault + .popsection + +/* + * clear_user_asm takes the user target address in r0 and the + * number of bytes to zero in r1. + * It returns the number of uncopiable bytes (hopefully zero) in r0. + * Note that we don't use a separate .fixup section here since we fall + * through into the "fixup" code as the last straight-line bundle anyway. + */ +STD_ENTRY(clear_user_asm) + { bz r1, 2f; or r2, r0, r1 } + andi r2, r2, 3 + bzt r2, .Lclear_aligned_user_asm +1: { sb r0, zero; addi r0, r0, 1; addi r1, r1, -1 } + bnzt r1, 1b +2: { move r0, r1; jrp lr } + .pushsection __ex_table,"a" + .align 4 + .word 1b, 2b + .popsection + +.Lclear_aligned_user_asm: +1: { sw r0, zero; addi r0, r0, 4; addi r1, r1, -4 } + bnzt r1, 1b +2: { move r0, r1; jrp lr } + STD_ENDPROC(clear_user_asm) + .pushsection __ex_table,"a" + .align 4 + .word 1b, 2b + .popsection + +/* + * flush_user_asm takes the user target address in r0 and the + * number of bytes to flush in r1. + * It returns the number of unflushable bytes (hopefully zero) in r0. + */ +STD_ENTRY(flush_user_asm) + bz r1, 2f + { movei r2, L2_CACHE_BYTES; add r1, r0, r1 } + { sub r2, zero, r2; addi r1, r1, L2_CACHE_BYTES-1 } + { and r0, r0, r2; and r1, r1, r2 } + { sub r1, r1, r0 } +1: { flush r0; addi r1, r1, -CHIP_FLUSH_STRIDE() } + { addi r0, r0, CHIP_FLUSH_STRIDE(); bnzt r1, 1b } +2: { move r0, r1; jrp lr } + STD_ENDPROC(flush_user_asm) + .pushsection __ex_table,"a" + .align 4 + .word 1b, 2b + .popsection + +/* + * finv_user_asm takes the user target address in r0 and the + * number of bytes to flush-invalidate in r1. + * It returns the number of not finv'able bytes (hopefully zero) in r0. + */ +STD_ENTRY(finv_user_asm) + bz r1, 2f + { movei r2, L2_CACHE_BYTES; add r1, r0, r1 } + { sub r2, zero, r2; addi r1, r1, L2_CACHE_BYTES-1 } + { and r0, r0, r2; and r1, r1, r2 } + { sub r1, r1, r0 } +1: { finv r0; addi r1, r1, -CHIP_FINV_STRIDE() } + { addi r0, r0, CHIP_FINV_STRIDE(); bnzt r1, 1b } +2: { move r0, r1; jrp lr } + STD_ENDPROC(finv_user_asm) + .pushsection __ex_table,"a" + .align 4 + .word 1b, 2b + .popsection diff --git a/arch/tile/lib/usercopy_64.S b/arch/tile/lib/usercopy_64.S new file mode 100644 index 000000000..b3b31a330 --- /dev/null +++ b/arch/tile/lib/usercopy_64.S @@ -0,0 +1,135 @@ +/* + * Copyright 2011 Tilera Corporation. All Rights Reserved. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation, version 2. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or + * NON INFRINGEMENT. See the GNU General Public License for + * more details. + */ + +#include <linux/linkage.h> +#include <asm/errno.h> +#include <asm/cache.h> +#include <arch/chip.h> + +/* Access user memory, but use MMU to avoid propagating kernel exceptions. */ + +/* + * strnlen_user_asm takes the pointer in r0, and the length bound in r1. + * It returns the length, including the terminating NUL, or zero on exception. + * If length is greater than the bound, returns one plus the bound. + */ +STD_ENTRY(strnlen_user_asm) + { beqz r1, 2f; addi r3, r0, -1 } /* bias down to include NUL */ +1: { ld1u r4, r0; addi r1, r1, -1 } + beqz r4, 2f + { bnezt r1, 1b; addi r0, r0, 1 } +2: { sub r0, r0, r3; jrp lr } + STD_ENDPROC(strnlen_user_asm) + .pushsection .fixup,"ax" +strnlen_user_fault: + { move r0, zero; jrp lr } + ENDPROC(strnlen_user_fault) + .section __ex_table,"a" + .align 8 + .quad 1b, strnlen_user_fault + .popsection + +/* + * strncpy_from_user_asm takes the kernel target pointer in r0, + * the userspace source pointer in r1, and the length bound (including + * the trailing NUL) in r2. On success, it returns the string length + * (not including the trailing NUL), or -EFAULT on failure. + */ +STD_ENTRY(strncpy_from_user_asm) + { beqz r2, 2f; move r3, r0 } +1: { ld1u r4, r1; addi r1, r1, 1; addi r2, r2, -1 } + { st1 r0, r4; addi r0, r0, 1 } + beqz r4, 2f + bnezt r2, 1b + { sub r0, r0, r3; jrp lr } +2: addi r0, r0, -1 /* don't count the trailing NUL */ + { sub r0, r0, r3; jrp lr } + STD_ENDPROC(strncpy_from_user_asm) + .pushsection .fixup,"ax" +strncpy_from_user_fault: + { movei r0, -EFAULT; jrp lr } + ENDPROC(strncpy_from_user_fault) + .section __ex_table,"a" + .align 8 + .quad 1b, strncpy_from_user_fault + .popsection + +/* + * clear_user_asm takes the user target address in r0 and the + * number of bytes to zero in r1. + * It returns the number of uncopiable bytes (hopefully zero) in r0. + * Note that we don't use a separate .fixup section here since we fall + * through into the "fixup" code as the last straight-line bundle anyway. + */ +STD_ENTRY(clear_user_asm) + { beqz r1, 2f; or r2, r0, r1 } + andi r2, r2, 7 + beqzt r2, .Lclear_aligned_user_asm +1: { st1 r0, zero; addi r0, r0, 1; addi r1, r1, -1 } + bnezt r1, 1b +2: { move r0, r1; jrp lr } + .pushsection __ex_table,"a" + .align 8 + .quad 1b, 2b + .popsection + +.Lclear_aligned_user_asm: +1: { st r0, zero; addi r0, r0, 8; addi r1, r1, -8 } + bnezt r1, 1b +2: { move r0, r1; jrp lr } + STD_ENDPROC(clear_user_asm) + .pushsection __ex_table,"a" + .align 8 + .quad 1b, 2b + .popsection + +/* + * flush_user_asm takes the user target address in r0 and the + * number of bytes to flush in r1. + * It returns the number of unflushable bytes (hopefully zero) in r0. + */ +STD_ENTRY(flush_user_asm) + beqz r1, 2f + { movei r2, L2_CACHE_BYTES; add r1, r0, r1 } + { sub r2, zero, r2; addi r1, r1, L2_CACHE_BYTES-1 } + { and r0, r0, r2; and r1, r1, r2 } + { sub r1, r1, r0 } +1: { flush r0; addi r1, r1, -CHIP_FLUSH_STRIDE() } + { addi r0, r0, CHIP_FLUSH_STRIDE(); bnezt r1, 1b } +2: { move r0, r1; jrp lr } + STD_ENDPROC(flush_user_asm) + .pushsection __ex_table,"a" + .align 8 + .quad 1b, 2b + .popsection + +/* + * finv_user_asm takes the user target address in r0 and the + * number of bytes to flush-invalidate in r1. + * It returns the number of not finv'able bytes (hopefully zero) in r0. + */ +STD_ENTRY(finv_user_asm) + beqz r1, 2f + { movei r2, L2_CACHE_BYTES; add r1, r0, r1 } + { sub r2, zero, r2; addi r1, r1, L2_CACHE_BYTES-1 } + { and r0, r0, r2; and r1, r1, r2 } + { sub r1, r1, r0 } +1: { finv r0; addi r1, r1, -CHIP_FINV_STRIDE() } + { addi r0, r0, CHIP_FINV_STRIDE(); bnezt r1, 1b } +2: { move r0, r1; jrp lr } + STD_ENDPROC(finv_user_asm) + .pushsection __ex_table,"a" + .align 8 + .quad 1b, 2b + .popsection |