1 files changed, 189 insertions, 0 deletions
diff --git a/arch/x86/boot/Makefile b/arch/x86/boot/Makefile
new file mode 100644
index 000000000..57bbf2fb2
--- /dev/null
+++ b/arch/x86/boot/Makefile
@@ -0,0 +1,189 @@
+#
+# arch/x86/boot/Makefile
+#
+# This file is subject to the terms and conditions of the GNU General Public
+# License.  See the file "COPYING" in the main directory of this archive
+# for more details.
+#
+# Copyright (C) 1994 by Linus Torvalds
+# Changed by many, many contributors over the years.
+#
+
+# If you want to preset the SVGA mode, uncomment the next line and
+# set SVGA_MODE to whatever number you want.
+# Set it to -DSVGA_MODE=NORMAL_VGA if you just want the EGA/VGA mode.
+# The number is the same as you would ordinarily press at bootup.
+
+KASAN_SANITIZE := n
+
+SVGA_MODE	:= -DSVGA_MODE=NORMAL_VGA
+
+targets		:= vmlinux.bin setup.bin setup.elf bzImage
+targets		+= fdimage fdimage144 fdimage288 image.iso mtools.conf
+subdir-		:= compressed
+
+setup-y		+= a20.o bioscall.o cmdline.o copy.o cpu.o cpuflags.o cpucheck.o
+setup-y		+= early_serial_console.o edd.o header.o main.o mca.o memory.o
+setup-y		+= pm.o pmjump.o printf.o regs.o string.o tty.o video.o
+setup-y		+= video-mode.o version.o
+setup-$(CONFIG_X86_APM_BOOT) += apm.o
+
+# The link order of the video-*.o modules can matter.  In particular,
+# video-vga.o *must* be listed first, followed by video-vesa.o.
+# Hardware-specific drivers should follow in the order they should be
+# probed, and video-bios.o should typically be last.
+setup-y		+= video-vga.o
+setup-y		+= video-vesa.o
+setup-y		+= video-bios.o
+
+targets		+= $(setup-y)
+hostprogs-y	:= tools/build
+hostprogs-$(CONFIG_X86_FEATURE_NAMES) += mkcpustr
+
+HOST_EXTRACFLAGS += -I$(srctree)/tools/include \
+		    -include include/generated/autoconf.h \
+	            -D__EXPORTED_HEADERS__
+
+ifdef CONFIG_X86_FEATURE_NAMES
+$(obj)/cpu.o: $(obj)/cpustr.h
+
+quiet_cmd_cpustr = CPUSTR  $@
+      cmd_cpustr = $(obj)/mkcpustr > $@
+targets += cpustr.h
+$(obj)/cpustr.h: $(obj)/mkcpustr FORCE
+	$(call if_changed,cpustr)
+endif
+clean-files += cpustr.h
+
+# ---------------------------------------------------------------------------
+
+KBUILD_CFLAGS	:= $(USERINCLUDE) $(REALMODE_CFLAGS) -D_SETUP
+KBUILD_AFLAGS	:= $(KBUILD_CFLAGS) -D__ASSEMBLY__
+GCOV_PROFILE := n
+
+$(obj)/bzImage: asflags-y  := $(SVGA_MODE)
+
+quiet_cmd_image = BUILD   $@
+cmd_image = $(obj)/tools/build $(obj)/setup.bin $(obj)/vmlinux.bin \
+			       $(obj)/zoffset.h $@
+
+$(obj)/bzImage: $(obj)/setup.bin $(obj)/vmlinux.bin $(obj)/tools/build FORCE
+	$(call if_changed,image)
+	@echo 'Kernel: $@ is ready' ' (#'`cat .version`')'
+
+OBJCOPYFLAGS_vmlinux.bin := -O binary -R .note -R .comment -S
+$(obj)/vmlinux.bin: $(obj)/compressed/vmlinux FORCE
+	$(call if_changed,objcopy)
+
+SETUP_OBJS = $(addprefix $(obj)/,$(setup-y))
+
+sed-voffset := -e 's/^\([0-9a-fA-F]*\) [ABCDGRSTVW] \(_text\|_end\)$$/\#define VO_\2 0x\1/p'
+
+quiet_cmd_voffset = VOFFSET $@
+      cmd_voffset = $(NM) $< | sed -n $(sed-voffset) > $@
+
+targets += voffset.h
+$(obj)/voffset.h: vmlinux FORCE
+	$(call if_changed,voffset)
+
+sed-zoffset := -e 's/^\([0-9a-fA-F]*\) [ABCDGRSTVW] \(startup_32\|startup_64\|efi32_stub_entry\|efi64_stub_entry\|efi_pe_entry\|input_data\|_end\|z_.*\)$$/\#define ZO_\2 0x\1/p'
+
+quiet_cmd_zoffset = ZOFFSET $@
+      cmd_zoffset = $(NM) $< | sed -n $(sed-zoffset) > $@
+
+targets += zoffset.h
+$(obj)/zoffset.h: $(obj)/compressed/vmlinux FORCE
+	$(call if_changed,zoffset)
+
+
+AFLAGS_header.o += -I$(obj)
+$(obj)/header.o: $(obj)/voffset.h $(obj)/zoffset.h
+
+LDFLAGS_setup.elf	:= -T
+$(obj)/setup.elf: $(src)/setup.ld $(SETUP_OBJS) FORCE
+	$(call if_changed,ld)
+
+OBJCOPYFLAGS_setup.bin	:= -O binary
+$(obj)/setup.bin: $(obj)/setup.elf FORCE
+	$(call if_changed,objcopy)
+
+$(obj)/compressed/vmlinux: FORCE
+	$(Q)$(MAKE) $(build)=$(obj)/compressed $@
+
+# Set this if you want to pass append arguments to the
+# bzdisk/fdimage/isoimage kernel
+FDARGS =
+# Set this if you want an initrd included with the
+# bzdisk/fdimage/isoimage kernel
+FDINITRD =
+
+image_cmdline = default linux $(FDARGS) $(if $(FDINITRD),initrd=initrd.img,)
+
+$(obj)/mtools.conf: $(src)/mtools.conf.in
+	sed -e 's|@OBJ@|$(obj)|g' < $< > $@
+
+# This requires write access to /dev/fd0
+bzdisk: $(obj)/bzImage $(obj)/mtools.conf
+	MTOOLSRC=$(obj)/mtools.conf mformat a:			; sync
+	syslinux /dev/fd0					; sync
+	echo '$(image_cmdline)' | \
+		MTOOLSRC=$(src)/mtools.conf mcopy - a:syslinux.cfg
+	if [ -f '$(FDINITRD)' ] ; then \
+		MTOOLSRC=$(obj)/mtools.conf mcopy '$(FDINITRD)' a:initrd.img ; \
+	fi
+	MTOOLSRC=$(obj)/mtools.conf mcopy $(obj)/bzImage a:linux	; sync
+
+# These require being root or having syslinux 2.02 or higher installed
+fdimage fdimage144: $(obj)/bzImage $(obj)/mtools.conf
+	dd if=/dev/zero of=$(obj)/fdimage bs=1024 count=1440
+	MTOOLSRC=$(obj)/mtools.conf mformat v:			; sync
+	syslinux $(obj)/fdimage					; sync
+	echo '$(image_cmdline)' | \
+		MTOOLSRC=$(obj)/mtools.conf mcopy - v:syslinux.cfg
+	if [ -f '$(FDINITRD)' ] ; then \
+		MTOOLSRC=$(obj)/mtools.conf mcopy '$(FDINITRD)' v:initrd.img ; \
+	fi
+	MTOOLSRC=$(obj)/mtools.conf mcopy $(obj)/bzImage v:linux	; sync
+
+fdimage288: $(obj)/bzImage $(obj)/mtools.conf
+	dd if=/dev/zero of=$(obj)/fdimage bs=1024 count=2880
+	MTOOLSRC=$(obj)/mtools.conf mformat w:			; sync
+	syslinux $(obj)/fdimage					; sync
+	echo '$(image_cmdline)' | \
+		MTOOLSRC=$(obj)/mtools.conf mcopy - w:syslinux.cfg
+	if [ -f '$(FDINITRD)' ] ; then \
+		MTOOLSRC=$(obj)/mtools.conf mcopy '$(FDINITRD)' w:initrd.img ; \
+	fi
+	MTOOLSRC=$(obj)/mtools.conf mcopy $(obj)/bzImage w:linux	; sync
+
+isoimage: $(obj)/bzImage
+	-rm -rf $(obj)/isoimage
+	mkdir $(obj)/isoimage
+	for i in lib lib64 share end ; do \
+		if [ -f /usr/$$i/syslinux/isolinux.bin ] ; then \
+			cp /usr/$$i/syslinux/isolinux.bin $(obj)/isoimage ; \
+			break ; \
+		fi ; \
+		if [ $$i = end ] ; then exit 1 ; fi ; \
+	done
+	cp $(obj)/bzImage $(obj)/isoimage/linux
+	echo '$(image_cmdline)' > $(obj)/isoimage/isolinux.cfg
+	if [ -f '$(FDINITRD)' ] ; then \
+		cp '$(FDINITRD)' $(obj)/isoimage/initrd.img ; \
+	fi
+	mkisofs -J -r -o $(obj)/image.iso -b isolinux.bin -c boot.cat \
+		-no-emul-boot -boot-load-size 4 -boot-info-table \
+		$(obj)/isoimage
+	isohybrid $(obj)/image.iso 2>/dev/null || true
+	rm -rf $(obj)/isoimage
+
+bzlilo: $(obj)/bzImage
+	if [ -f $(INSTALL_PATH)/vmlinuz ]; then mv $(INSTALL_PATH)/vmlinuz $(INSTALL_PATH)/vmlinuz.old; fi
+	if [ -f $(INSTALL_PATH)/System.map ]; then mv $(INSTALL_PATH)/System.map $(INSTALL_PATH)/System.old; fi
+	cat $(obj)/bzImage > $(INSTALL_PATH)/vmlinuz
+	cp System.map $(INSTALL_PATH)/
+	if [ -x /sbin/lilo ]; then /sbin/lilo; else /etc/lilo/install; fi
+
+install:
+	sh $(srctree)/$(src)/install.sh $(KERNELRELEASE) $(obj)/bzImage \
+		System.map "$(INSTALL_PATH)"