summaryrefslogtreecommitdiff
path: root/arch/x86/kernel/acpi
diff options
context:
space:
mode:
Diffstat (limited to 'arch/x86/kernel/acpi')
-rw-r--r--arch/x86/kernel/acpi/Makefile8
-rw-r--r--arch/x86/kernel/acpi/apei.c62
-rw-r--r--arch/x86/kernel/acpi/boot.c1762
-rw-r--r--arch/x86/kernel/acpi/cstate.c183
-rw-r--r--arch/x86/kernel/acpi/sleep.c140
-rw-r--r--arch/x86/kernel/acpi/sleep.h21
-rw-r--r--arch/x86/kernel/acpi/wakeup_32.S97
-rw-r--r--arch/x86/kernel/acpi/wakeup_64.S124
8 files changed, 2397 insertions, 0 deletions
diff --git a/arch/x86/kernel/acpi/Makefile b/arch/x86/kernel/acpi/Makefile
new file mode 100644
index 000000000..3242e591f
--- /dev/null
+++ b/arch/x86/kernel/acpi/Makefile
@@ -0,0 +1,8 @@
+obj-$(CONFIG_ACPI) += boot.o
+obj-$(CONFIG_ACPI_SLEEP) += sleep.o wakeup_$(BITS).o
+obj-$(CONFIG_ACPI_APEI) += apei.o
+
+ifneq ($(CONFIG_ACPI_PROCESSOR),)
+obj-y += cstate.o
+endif
+
diff --git a/arch/x86/kernel/acpi/apei.c b/arch/x86/kernel/acpi/apei.c
new file mode 100644
index 000000000..c280df6b2
--- /dev/null
+++ b/arch/x86/kernel/acpi/apei.c
@@ -0,0 +1,62 @@
+/*
+ * Arch-specific APEI-related functions.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <acpi/apei.h>
+
+#include <asm/mce.h>
+#include <asm/tlbflush.h>
+
+int arch_apei_enable_cmcff(struct acpi_hest_header *hest_hdr, void *data)
+{
+#ifdef CONFIG_X86_MCE
+ int i;
+ struct acpi_hest_ia_corrected *cmc;
+ struct acpi_hest_ia_error_bank *mc_bank;
+
+ if (hest_hdr->type != ACPI_HEST_TYPE_IA32_CORRECTED_CHECK)
+ return 0;
+
+ cmc = (struct acpi_hest_ia_corrected *)hest_hdr;
+ if (!cmc->enabled)
+ return 0;
+
+ /*
+ * We expect HEST to provide a list of MC banks that report errors
+ * in firmware first mode. Otherwise, return non-zero value to
+ * indicate that we are done parsing HEST.
+ */
+ if (!(cmc->flags & ACPI_HEST_FIRMWARE_FIRST) ||
+ !cmc->num_hardware_banks)
+ return 1;
+
+ pr_info("HEST: Enabling Firmware First mode for corrected errors.\n");
+
+ mc_bank = (struct acpi_hest_ia_error_bank *)(cmc + 1);
+ for (i = 0; i < cmc->num_hardware_banks; i++, mc_bank++)
+ mce_disable_bank(mc_bank->bank_number);
+#endif
+ return 1;
+}
+
+void arch_apei_report_mem_error(int sev, struct cper_sec_mem_err *mem_err)
+{
+#ifdef CONFIG_X86_MCE
+ apei_mce_report_mem_error(sev, mem_err);
+#endif
+}
+
+void arch_apei_flush_tlb_one(unsigned long addr)
+{
+ __flush_tlb_one(addr);
+}
diff --git a/arch/x86/kernel/acpi/boot.c b/arch/x86/kernel/acpi/boot.c
new file mode 100644
index 000000000..bde7a2dc5
--- /dev/null
+++ b/arch/x86/kernel/acpi/boot.c
@@ -0,0 +1,1762 @@
+/*
+ * boot.c - Architecture-Specific Low-Level ACPI Boot Support
+ *
+ * Copyright (C) 2001, 2002 Paul Diefenbaugh <paul.s.diefenbaugh@intel.com>
+ * Copyright (C) 2001 Jun Nakajima <jun.nakajima@intel.com>
+ *
+ * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ *
+ * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ */
+
+#include <linux/init.h>
+#include <linux/acpi.h>
+#include <linux/acpi_pmtmr.h>
+#include <linux/efi.h>
+#include <linux/cpumask.h>
+#include <linux/module.h>
+#include <linux/dmi.h>
+#include <linux/irq.h>
+#include <linux/irqdomain.h>
+#include <linux/slab.h>
+#include <linux/bootmem.h>
+#include <linux/ioport.h>
+#include <linux/pci.h>
+
+#include <asm/pci_x86.h>
+#include <asm/pgtable.h>
+#include <asm/io_apic.h>
+#include <asm/apic.h>
+#include <asm/io.h>
+#include <asm/mpspec.h>
+#include <asm/smp.h>
+#include <asm/i8259.h>
+
+#include "sleep.h" /* To include x86_acpi_suspend_lowlevel */
+static int __initdata acpi_force = 0;
+int acpi_disabled;
+EXPORT_SYMBOL(acpi_disabled);
+
+#ifdef CONFIG_X86_64
+# include <asm/proto.h>
+#endif /* X86 */
+
+#define PREFIX "ACPI: "
+
+int acpi_noirq; /* skip ACPI IRQ initialization */
+int acpi_pci_disabled; /* skip ACPI PCI scan and IRQ initialization */
+EXPORT_SYMBOL(acpi_pci_disabled);
+
+int acpi_lapic;
+int acpi_ioapic;
+int acpi_strict;
+int acpi_disable_cmcff;
+
+u8 acpi_sci_flags __initdata;
+int acpi_sci_override_gsi __initdata;
+int acpi_skip_timer_override __initdata;
+int acpi_use_timer_override __initdata;
+int acpi_fix_pin2_polarity __initdata;
+
+#ifdef CONFIG_X86_LOCAL_APIC
+static u64 acpi_lapic_addr __initdata = APIC_DEFAULT_PHYS_BASE;
+#endif
+
+/*
+ * Locks related to IOAPIC hotplug
+ * Hotplug side:
+ * ->device_hotplug_lock
+ * ->acpi_ioapic_lock
+ * ->ioapic_lock
+ * Interrupt mapping side:
+ * ->acpi_ioapic_lock
+ * ->ioapic_mutex
+ * ->ioapic_lock
+ */
+static DEFINE_MUTEX(acpi_ioapic_lock);
+
+/* --------------------------------------------------------------------------
+ Boot-time Configuration
+ -------------------------------------------------------------------------- */
+
+/*
+ * The default interrupt routing model is PIC (8259). This gets
+ * overridden if IOAPICs are enumerated (below).
+ */
+enum acpi_irq_model_id acpi_irq_model = ACPI_IRQ_MODEL_PIC;
+
+
+/*
+ * ISA irqs by default are the first 16 gsis but can be
+ * any gsi as specified by an interrupt source override.
+ */
+static u32 isa_irq_to_gsi[NR_IRQS_LEGACY] __read_mostly = {
+ 0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15
+};
+
+#define ACPI_INVALID_GSI INT_MIN
+
+/*
+ * This is just a simple wrapper around early_ioremap(),
+ * with sanity checks for phys == 0 and size == 0.
+ */
+char *__init __acpi_map_table(unsigned long phys, unsigned long size)
+{
+
+ if (!phys || !size)
+ return NULL;
+
+ return early_ioremap(phys, size);
+}
+
+void __init __acpi_unmap_table(char *map, unsigned long size)
+{
+ if (!map || !size)
+ return;
+
+ early_iounmap(map, size);
+}
+
+#ifdef CONFIG_X86_LOCAL_APIC
+static int __init acpi_parse_madt(struct acpi_table_header *table)
+{
+ struct acpi_table_madt *madt = NULL;
+
+ if (!cpu_has_apic)
+ return -EINVAL;
+
+ madt = (struct acpi_table_madt *)table;
+ if (!madt) {
+ printk(KERN_WARNING PREFIX "Unable to map MADT\n");
+ return -ENODEV;
+ }
+
+ if (madt->address) {
+ acpi_lapic_addr = (u64) madt->address;
+
+ printk(KERN_DEBUG PREFIX "Local APIC address 0x%08x\n",
+ madt->address);
+ }
+
+ default_acpi_madt_oem_check(madt->header.oem_id,
+ madt->header.oem_table_id);
+
+ return 0;
+}
+
+/**
+ * acpi_register_lapic - register a local apic and generates a logic cpu number
+ * @id: local apic id to register
+ * @enabled: this cpu is enabled or not
+ *
+ * Returns the logic cpu number which maps to the local apic
+ */
+static int acpi_register_lapic(int id, u8 enabled)
+{
+ unsigned int ver = 0;
+
+ if (id >= MAX_LOCAL_APIC) {
+ printk(KERN_INFO PREFIX "skipped apicid that is too big\n");
+ return -EINVAL;
+ }
+
+ if (!enabled) {
+ ++disabled_cpus;
+ return -EINVAL;
+ }
+
+ if (boot_cpu_physical_apicid != -1U)
+ ver = apic_version[boot_cpu_physical_apicid];
+
+ return generic_processor_info(id, ver);
+}
+
+static int __init
+acpi_parse_x2apic(struct acpi_subtable_header *header, const unsigned long end)
+{
+ struct acpi_madt_local_x2apic *processor = NULL;
+ int apic_id;
+ u8 enabled;
+
+ processor = (struct acpi_madt_local_x2apic *)header;
+
+ if (BAD_MADT_ENTRY(processor, end))
+ return -EINVAL;
+
+ acpi_table_print_madt_entry(header);
+
+ apic_id = processor->local_apic_id;
+ enabled = processor->lapic_flags & ACPI_MADT_ENABLED;
+#ifdef CONFIG_X86_X2APIC
+ /*
+ * We need to register disabled CPU as well to permit
+ * counting disabled CPUs. This allows us to size
+ * cpus_possible_map more accurately, to permit
+ * to not preallocating memory for all NR_CPUS
+ * when we use CPU hotplug.
+ */
+ if (!apic->apic_id_valid(apic_id) && enabled)
+ printk(KERN_WARNING PREFIX "x2apic entry ignored\n");
+ else
+ acpi_register_lapic(apic_id, enabled);
+#else
+ printk(KERN_WARNING PREFIX "x2apic entry ignored\n");
+#endif
+
+ return 0;
+}
+
+static int __init
+acpi_parse_lapic(struct acpi_subtable_header * header, const unsigned long end)
+{
+ struct acpi_madt_local_apic *processor = NULL;
+
+ processor = (struct acpi_madt_local_apic *)header;
+
+ if (BAD_MADT_ENTRY(processor, end))
+ return -EINVAL;
+
+ acpi_table_print_madt_entry(header);
+
+ /*
+ * We need to register disabled CPU as well to permit
+ * counting disabled CPUs. This allows us to size
+ * cpus_possible_map more accurately, to permit
+ * to not preallocating memory for all NR_CPUS
+ * when we use CPU hotplug.
+ */
+ acpi_register_lapic(processor->id, /* APIC ID */
+ processor->lapic_flags & ACPI_MADT_ENABLED);
+
+ return 0;
+}
+
+static int __init
+acpi_parse_sapic(struct acpi_subtable_header *header, const unsigned long end)
+{
+ struct acpi_madt_local_sapic *processor = NULL;
+
+ processor = (struct acpi_madt_local_sapic *)header;
+
+ if (BAD_MADT_ENTRY(processor, end))
+ return -EINVAL;
+
+ acpi_table_print_madt_entry(header);
+
+ acpi_register_lapic((processor->id << 8) | processor->eid,/* APIC ID */
+ processor->lapic_flags & ACPI_MADT_ENABLED);
+
+ return 0;
+}
+
+static int __init
+acpi_parse_lapic_addr_ovr(struct acpi_subtable_header * header,
+ const unsigned long end)
+{
+ struct acpi_madt_local_apic_override *lapic_addr_ovr = NULL;
+
+ lapic_addr_ovr = (struct acpi_madt_local_apic_override *)header;
+
+ if (BAD_MADT_ENTRY(lapic_addr_ovr, end))
+ return -EINVAL;
+
+ acpi_lapic_addr = lapic_addr_ovr->address;
+
+ return 0;
+}
+
+static int __init
+acpi_parse_x2apic_nmi(struct acpi_subtable_header *header,
+ const unsigned long end)
+{
+ struct acpi_madt_local_x2apic_nmi *x2apic_nmi = NULL;
+
+ x2apic_nmi = (struct acpi_madt_local_x2apic_nmi *)header;
+
+ if (BAD_MADT_ENTRY(x2apic_nmi, end))
+ return -EINVAL;
+
+ acpi_table_print_madt_entry(header);
+
+ if (x2apic_nmi->lint != 1)
+ printk(KERN_WARNING PREFIX "NMI not connected to LINT 1!\n");
+
+ return 0;
+}
+
+static int __init
+acpi_parse_lapic_nmi(struct acpi_subtable_header * header, const unsigned long end)
+{
+ struct acpi_madt_local_apic_nmi *lapic_nmi = NULL;
+
+ lapic_nmi = (struct acpi_madt_local_apic_nmi *)header;
+
+ if (BAD_MADT_ENTRY(lapic_nmi, end))
+ return -EINVAL;
+
+ acpi_table_print_madt_entry(header);
+
+ if (lapic_nmi->lint != 1)
+ printk(KERN_WARNING PREFIX "NMI not connected to LINT 1!\n");
+
+ return 0;
+}
+
+#endif /*CONFIG_X86_LOCAL_APIC */
+
+#ifdef CONFIG_X86_IO_APIC
+#define MP_ISA_BUS 0
+
+static void __init mp_override_legacy_irq(u8 bus_irq, u8 polarity, u8 trigger,
+ u32 gsi)
+{
+ int ioapic;
+ int pin;
+ struct mpc_intsrc mp_irq;
+
+ /*
+ * Convert 'gsi' to 'ioapic.pin'.
+ */
+ ioapic = mp_find_ioapic(gsi);
+ if (ioapic < 0)
+ return;
+ pin = mp_find_ioapic_pin(ioapic, gsi);
+
+ /*
+ * TBD: This check is for faulty timer entries, where the override
+ * erroneously sets the trigger to level, resulting in a HUGE
+ * increase of timer interrupts!
+ */
+ if ((bus_irq == 0) && (trigger == 3))
+ trigger = 1;
+
+ mp_irq.type = MP_INTSRC;
+ mp_irq.irqtype = mp_INT;
+ mp_irq.irqflag = (trigger << 2) | polarity;
+ mp_irq.srcbus = MP_ISA_BUS;
+ mp_irq.srcbusirq = bus_irq; /* IRQ */
+ mp_irq.dstapic = mpc_ioapic_id(ioapic); /* APIC ID */
+ mp_irq.dstirq = pin; /* INTIN# */
+
+ mp_save_irq(&mp_irq);
+
+ /*
+ * Reset default identity mapping if gsi is also an legacy IRQ,
+ * otherwise there will be more than one entry with the same GSI
+ * and acpi_isa_irq_to_gsi() may give wrong result.
+ */
+ if (gsi < nr_legacy_irqs() && isa_irq_to_gsi[gsi] == gsi)
+ isa_irq_to_gsi[gsi] = ACPI_INVALID_GSI;
+ isa_irq_to_gsi[bus_irq] = gsi;
+}
+
+static int mp_config_acpi_gsi(struct device *dev, u32 gsi, int trigger,
+ int polarity)
+{
+#ifdef CONFIG_X86_MPPARSE
+ struct mpc_intsrc mp_irq;
+ struct pci_dev *pdev;
+ unsigned char number;
+ unsigned int devfn;
+ int ioapic;
+ u8 pin;
+
+ if (!acpi_ioapic)
+ return 0;
+ if (!dev || !dev_is_pci(dev))
+ return 0;
+
+ pdev = to_pci_dev(dev);
+ number = pdev->bus->number;
+ devfn = pdev->devfn;
+ pin = pdev->pin;
+ /* print the entry should happen on mptable identically */
+ mp_irq.type = MP_INTSRC;
+ mp_irq.irqtype = mp_INT;
+ mp_irq.irqflag = (trigger == ACPI_EDGE_SENSITIVE ? 4 : 0x0c) |
+ (polarity == ACPI_ACTIVE_HIGH ? 1 : 3);
+ mp_irq.srcbus = number;
+ mp_irq.srcbusirq = (((devfn >> 3) & 0x1f) << 2) | ((pin - 1) & 3);
+ ioapic = mp_find_ioapic(gsi);
+ mp_irq.dstapic = mpc_ioapic_id(ioapic);
+ mp_irq.dstirq = mp_find_ioapic_pin(ioapic, gsi);
+
+ mp_save_irq(&mp_irq);
+#endif
+ return 0;
+}
+
+static int mp_register_gsi(struct device *dev, u32 gsi, int trigger,
+ int polarity)
+{
+ int irq, node;
+
+ if (acpi_irq_model != ACPI_IRQ_MODEL_IOAPIC)
+ return gsi;
+
+ trigger = trigger == ACPI_EDGE_SENSITIVE ? 0 : 1;
+ polarity = polarity == ACPI_ACTIVE_HIGH ? 0 : 1;
+ node = dev ? dev_to_node(dev) : NUMA_NO_NODE;
+ if (mp_set_gsi_attr(gsi, trigger, polarity, node)) {
+ pr_warn("Failed to set pin attr for GSI%d\n", gsi);
+ return -1;
+ }
+
+ irq = mp_map_gsi_to_irq(gsi, IOAPIC_MAP_ALLOC);
+ if (irq < 0)
+ return irq;
+
+ /* Don't set up the ACPI SCI because it's already set up */
+ if (enable_update_mptable && acpi_gbl_FADT.sci_interrupt != gsi)
+ mp_config_acpi_gsi(dev, gsi, trigger, polarity);
+
+ return irq;
+}
+
+static void mp_unregister_gsi(u32 gsi)
+{
+ int irq;
+
+ if (acpi_irq_model != ACPI_IRQ_MODEL_IOAPIC)
+ return;
+
+ irq = mp_map_gsi_to_irq(gsi, 0);
+ if (irq > 0)
+ mp_unmap_irq(irq);
+}
+
+static struct irq_domain_ops acpi_irqdomain_ops = {
+ .map = mp_irqdomain_map,
+ .unmap = mp_irqdomain_unmap,
+};
+
+static int __init
+acpi_parse_ioapic(struct acpi_subtable_header * header, const unsigned long end)
+{
+ struct acpi_madt_io_apic *ioapic = NULL;
+ struct ioapic_domain_cfg cfg = {
+ .type = IOAPIC_DOMAIN_DYNAMIC,
+ .ops = &acpi_irqdomain_ops,
+ };
+
+ ioapic = (struct acpi_madt_io_apic *)header;
+
+ if (BAD_MADT_ENTRY(ioapic, end))
+ return -EINVAL;
+
+ acpi_table_print_madt_entry(header);
+
+ /* Statically assign IRQ numbers for IOAPICs hosting legacy IRQs */
+ if (ioapic->global_irq_base < nr_legacy_irqs())
+ cfg.type = IOAPIC_DOMAIN_LEGACY;
+
+ mp_register_ioapic(ioapic->id, ioapic->address, ioapic->global_irq_base,
+ &cfg);
+
+ return 0;
+}
+
+/*
+ * Parse Interrupt Source Override for the ACPI SCI
+ */
+static void __init acpi_sci_ioapic_setup(u8 bus_irq, u16 polarity, u16 trigger, u32 gsi)
+{
+ if (trigger == 0) /* compatible SCI trigger is level */
+ trigger = 3;
+
+ if (polarity == 0) /* compatible SCI polarity is low */
+ polarity = 3;
+
+ /* Command-line over-ride via acpi_sci= */
+ if (acpi_sci_flags & ACPI_MADT_TRIGGER_MASK)
+ trigger = (acpi_sci_flags & ACPI_MADT_TRIGGER_MASK) >> 2;
+
+ if (acpi_sci_flags & ACPI_MADT_POLARITY_MASK)
+ polarity = acpi_sci_flags & ACPI_MADT_POLARITY_MASK;
+
+ mp_override_legacy_irq(bus_irq, polarity, trigger, gsi);
+
+ /*
+ * stash over-ride to indicate we've been here
+ * and for later update of acpi_gbl_FADT
+ */
+ acpi_sci_override_gsi = gsi;
+ return;
+}
+
+static int __init
+acpi_parse_int_src_ovr(struct acpi_subtable_header * header,
+ const unsigned long end)
+{
+ struct acpi_madt_interrupt_override *intsrc = NULL;
+
+ intsrc = (struct acpi_madt_interrupt_override *)header;
+
+ if (BAD_MADT_ENTRY(intsrc, end))
+ return -EINVAL;
+
+ acpi_table_print_madt_entry(header);
+
+ if (intsrc->source_irq == acpi_gbl_FADT.sci_interrupt) {
+ acpi_sci_ioapic_setup(intsrc->source_irq,
+ intsrc->inti_flags & ACPI_MADT_POLARITY_MASK,
+ (intsrc->inti_flags & ACPI_MADT_TRIGGER_MASK) >> 2,
+ intsrc->global_irq);
+ return 0;
+ }
+
+ if (intsrc->source_irq == 0) {
+ if (acpi_skip_timer_override) {
+ printk(PREFIX "BIOS IRQ0 override ignored.\n");
+ return 0;
+ }
+
+ if ((intsrc->global_irq == 2) && acpi_fix_pin2_polarity
+ && (intsrc->inti_flags & ACPI_MADT_POLARITY_MASK)) {
+ intsrc->inti_flags &= ~ACPI_MADT_POLARITY_MASK;
+ printk(PREFIX "BIOS IRQ0 pin2 override: forcing polarity to high active.\n");
+ }
+ }
+
+ mp_override_legacy_irq(intsrc->source_irq,
+ intsrc->inti_flags & ACPI_MADT_POLARITY_MASK,
+ (intsrc->inti_flags & ACPI_MADT_TRIGGER_MASK) >> 2,
+ intsrc->global_irq);
+
+ return 0;
+}
+
+static int __init
+acpi_parse_nmi_src(struct acpi_subtable_header * header, const unsigned long end)
+{
+ struct acpi_madt_nmi_source *nmi_src = NULL;
+
+ nmi_src = (struct acpi_madt_nmi_source *)header;
+
+ if (BAD_MADT_ENTRY(nmi_src, end))
+ return -EINVAL;
+
+ acpi_table_print_madt_entry(header);
+
+ /* TBD: Support nimsrc entries? */
+
+ return 0;
+}
+
+#endif /* CONFIG_X86_IO_APIC */
+
+/*
+ * acpi_pic_sci_set_trigger()
+ *
+ * use ELCR to set PIC-mode trigger type for SCI
+ *
+ * If a PIC-mode SCI is not recognized or gives spurious IRQ7's
+ * it may require Edge Trigger -- use "acpi_sci=edge"
+ *
+ * Port 0x4d0-4d1 are ECLR1 and ECLR2, the Edge/Level Control Registers
+ * for the 8259 PIC. bit[n] = 1 means irq[n] is Level, otherwise Edge.
+ * ECLR1 is IRQs 0-7 (IRQ 0, 1, 2 must be 0)
+ * ECLR2 is IRQs 8-15 (IRQ 8, 13 must be 0)
+ */
+
+void __init acpi_pic_sci_set_trigger(unsigned int irq, u16 trigger)
+{
+ unsigned int mask = 1 << irq;
+ unsigned int old, new;
+
+ /* Real old ELCR mask */
+ old = inb(0x4d0) | (inb(0x4d1) << 8);
+
+ /*
+ * If we use ACPI to set PCI IRQs, then we should clear ELCR
+ * since we will set it correctly as we enable the PCI irq
+ * routing.
+ */
+ new = acpi_noirq ? old : 0;
+
+ /*
+ * Update SCI information in the ELCR, it isn't in the PCI
+ * routing tables..
+ */
+ switch (trigger) {
+ case 1: /* Edge - clear */
+ new &= ~mask;
+ break;
+ case 3: /* Level - set */
+ new |= mask;
+ break;
+ }
+
+ if (old == new)
+ return;
+
+ printk(PREFIX "setting ELCR to %04x (from %04x)\n", new, old);
+ outb(new, 0x4d0);
+ outb(new >> 8, 0x4d1);
+}
+
+int acpi_gsi_to_irq(u32 gsi, unsigned int *irqp)
+{
+ int rc, irq, trigger, polarity;
+
+ if (acpi_irq_model == ACPI_IRQ_MODEL_PIC) {
+ *irqp = gsi;
+ return 0;
+ }
+
+ rc = acpi_get_override_irq(gsi, &trigger, &polarity);
+ if (rc == 0) {
+ trigger = trigger ? ACPI_LEVEL_SENSITIVE : ACPI_EDGE_SENSITIVE;
+ polarity = polarity ? ACPI_ACTIVE_LOW : ACPI_ACTIVE_HIGH;
+ irq = acpi_register_gsi(NULL, gsi, trigger, polarity);
+ if (irq >= 0) {
+ *irqp = irq;
+ return 0;
+ }
+ }
+
+ return -1;
+}
+EXPORT_SYMBOL_GPL(acpi_gsi_to_irq);
+
+int acpi_isa_irq_to_gsi(unsigned isa_irq, u32 *gsi)
+{
+ if (isa_irq < nr_legacy_irqs() &&
+ isa_irq_to_gsi[isa_irq] != ACPI_INVALID_GSI) {
+ *gsi = isa_irq_to_gsi[isa_irq];
+ return 0;
+ }
+
+ return -1;
+}
+
+static int acpi_register_gsi_pic(struct device *dev, u32 gsi,
+ int trigger, int polarity)
+{
+#ifdef CONFIG_PCI
+ /*
+ * Make sure all (legacy) PCI IRQs are set as level-triggered.
+ */
+ if (trigger == ACPI_LEVEL_SENSITIVE)
+ eisa_set_level_irq(gsi);
+#endif
+
+ return gsi;
+}
+
+#ifdef CONFIG_X86_LOCAL_APIC
+static int acpi_register_gsi_ioapic(struct device *dev, u32 gsi,
+ int trigger, int polarity)
+{
+ int irq = gsi;
+
+#ifdef CONFIG_X86_IO_APIC
+ mutex_lock(&acpi_ioapic_lock);
+ irq = mp_register_gsi(dev, gsi, trigger, polarity);
+ mutex_unlock(&acpi_ioapic_lock);
+#endif
+
+ return irq;
+}
+
+static void acpi_unregister_gsi_ioapic(u32 gsi)
+{
+#ifdef CONFIG_X86_IO_APIC
+ mutex_lock(&acpi_ioapic_lock);
+ mp_unregister_gsi(gsi);
+ mutex_unlock(&acpi_ioapic_lock);
+#endif
+}
+#endif
+
+int (*__acpi_register_gsi)(struct device *dev, u32 gsi,
+ int trigger, int polarity) = acpi_register_gsi_pic;
+void (*__acpi_unregister_gsi)(u32 gsi) = NULL;
+
+#ifdef CONFIG_ACPI_SLEEP
+int (*acpi_suspend_lowlevel)(void) = x86_acpi_suspend_lowlevel;
+#else
+int (*acpi_suspend_lowlevel)(void);
+#endif
+
+/*
+ * success: return IRQ number (>=0)
+ * failure: return < 0
+ */
+int acpi_register_gsi(struct device *dev, u32 gsi, int trigger, int polarity)
+{
+ return __acpi_register_gsi(dev, gsi, trigger, polarity);
+}
+EXPORT_SYMBOL_GPL(acpi_register_gsi);
+
+void acpi_unregister_gsi(u32 gsi)
+{
+ if (__acpi_unregister_gsi)
+ __acpi_unregister_gsi(gsi);
+}
+EXPORT_SYMBOL_GPL(acpi_unregister_gsi);
+
+#ifdef CONFIG_X86_LOCAL_APIC
+static void __init acpi_set_irq_model_ioapic(void)
+{
+ acpi_irq_model = ACPI_IRQ_MODEL_IOAPIC;
+ __acpi_register_gsi = acpi_register_gsi_ioapic;
+ __acpi_unregister_gsi = acpi_unregister_gsi_ioapic;
+ acpi_ioapic = 1;
+}
+#endif
+
+/*
+ * ACPI based hotplug support for CPU
+ */
+#ifdef CONFIG_ACPI_HOTPLUG_CPU
+#include <acpi/processor.h>
+
+static void acpi_map_cpu2node(acpi_handle handle, int cpu, int physid)
+{
+#ifdef CONFIG_ACPI_NUMA
+ int nid;
+
+ nid = acpi_get_node(handle);
+ if (nid != -1) {
+ set_apicid_to_node(physid, nid);
+ numa_set_node(cpu, nid);
+ }
+#endif
+}
+
+static int _acpi_map_lsapic(acpi_handle handle, int physid, int *pcpu)
+{
+ int cpu;
+
+ cpu = acpi_register_lapic(physid, ACPI_MADT_ENABLED);
+ if (cpu < 0) {
+ pr_info(PREFIX "Unable to map lapic to logical cpu number\n");
+ return cpu;
+ }
+
+ acpi_processor_set_pdc(handle);
+ acpi_map_cpu2node(handle, cpu, physid);
+
+ *pcpu = cpu;
+ return 0;
+}
+
+/* wrapper to silence section mismatch warning */
+int __ref acpi_map_cpu(acpi_handle handle, phys_cpuid_t physid, int *pcpu)
+{
+ return _acpi_map_lsapic(handle, physid, pcpu);
+}
+EXPORT_SYMBOL(acpi_map_cpu);
+
+int acpi_unmap_cpu(int cpu)
+{
+#ifdef CONFIG_ACPI_NUMA
+ set_apicid_to_node(per_cpu(x86_cpu_to_apicid, cpu), NUMA_NO_NODE);
+#endif
+
+ per_cpu(x86_cpu_to_apicid, cpu) = -1;
+ set_cpu_present(cpu, false);
+ num_processors--;
+
+ return (0);
+}
+EXPORT_SYMBOL(acpi_unmap_cpu);
+#endif /* CONFIG_ACPI_HOTPLUG_CPU */
+
+int acpi_register_ioapic(acpi_handle handle, u64 phys_addr, u32 gsi_base)
+{
+ int ret = -ENOSYS;
+#ifdef CONFIG_ACPI_HOTPLUG_IOAPIC
+ int ioapic_id;
+ u64 addr;
+ struct ioapic_domain_cfg cfg = {
+ .type = IOAPIC_DOMAIN_DYNAMIC,
+ .ops = &acpi_irqdomain_ops,
+ };
+
+ ioapic_id = acpi_get_ioapic_id(handle, gsi_base, &addr);
+ if (ioapic_id < 0) {
+ unsigned long long uid;
+ acpi_status status;
+
+ status = acpi_evaluate_integer(handle, METHOD_NAME__UID,
+ NULL, &uid);
+ if (ACPI_FAILURE(status)) {
+ acpi_handle_warn(handle, "failed to get IOAPIC ID.\n");
+ return -EINVAL;
+ }
+ ioapic_id = (int)uid;
+ }
+
+ mutex_lock(&acpi_ioapic_lock);
+ ret = mp_register_ioapic(ioapic_id, phys_addr, gsi_base, &cfg);
+ mutex_unlock(&acpi_ioapic_lock);
+#endif
+
+ return ret;
+}
+EXPORT_SYMBOL(acpi_register_ioapic);
+
+int acpi_unregister_ioapic(acpi_handle handle, u32 gsi_base)
+{
+ int ret = -ENOSYS;
+
+#ifdef CONFIG_ACPI_HOTPLUG_IOAPIC
+ mutex_lock(&acpi_ioapic_lock);
+ ret = mp_unregister_ioapic(gsi_base);
+ mutex_unlock(&acpi_ioapic_lock);
+#endif
+
+ return ret;
+}
+EXPORT_SYMBOL(acpi_unregister_ioapic);
+
+/**
+ * acpi_ioapic_registered - Check whether IOAPIC assoicatied with @gsi_base
+ * has been registered
+ * @handle: ACPI handle of the IOAPIC deivce
+ * @gsi_base: GSI base associated with the IOAPIC
+ *
+ * Assume caller holds some type of lock to serialize acpi_ioapic_registered()
+ * with acpi_register_ioapic()/acpi_unregister_ioapic().
+ */
+int acpi_ioapic_registered(acpi_handle handle, u32 gsi_base)
+{
+ int ret = 0;
+
+#ifdef CONFIG_ACPI_HOTPLUG_IOAPIC
+ mutex_lock(&acpi_ioapic_lock);
+ ret = mp_ioapic_registered(gsi_base);
+ mutex_unlock(&acpi_ioapic_lock);
+#endif
+
+ return ret;
+}
+
+static int __init acpi_parse_sbf(struct acpi_table_header *table)
+{
+ struct acpi_table_boot *sb = (struct acpi_table_boot *)table;
+
+ sbf_port = sb->cmos_index; /* Save CMOS port */
+
+ return 0;
+}
+
+#ifdef CONFIG_HPET_TIMER
+#include <asm/hpet.h>
+
+static struct resource *hpet_res __initdata;
+
+static int __init acpi_parse_hpet(struct acpi_table_header *table)
+{
+ struct acpi_table_hpet *hpet_tbl = (struct acpi_table_hpet *)table;
+
+ if (hpet_tbl->address.space_id != ACPI_SPACE_MEM) {
+ printk(KERN_WARNING PREFIX "HPET timers must be located in "
+ "memory.\n");
+ return -1;
+ }
+
+ hpet_address = hpet_tbl->address.address;
+ hpet_blockid = hpet_tbl->sequence;
+
+ /*
+ * Some broken BIOSes advertise HPET at 0x0. We really do not
+ * want to allocate a resource there.
+ */
+ if (!hpet_address) {
+ printk(KERN_WARNING PREFIX
+ "HPET id: %#x base: %#lx is invalid\n",
+ hpet_tbl->id, hpet_address);
+ return 0;
+ }
+#ifdef CONFIG_X86_64
+ /*
+ * Some even more broken BIOSes advertise HPET at
+ * 0xfed0000000000000 instead of 0xfed00000. Fix it up and add
+ * some noise:
+ */
+ if (hpet_address == 0xfed0000000000000UL) {
+ if (!hpet_force_user) {
+ printk(KERN_WARNING PREFIX "HPET id: %#x "
+ "base: 0xfed0000000000000 is bogus\n "
+ "try hpet=force on the kernel command line to "
+ "fix it up to 0xfed00000.\n", hpet_tbl->id);
+ hpet_address = 0;
+ return 0;
+ }
+ printk(KERN_WARNING PREFIX
+ "HPET id: %#x base: 0xfed0000000000000 fixed up "
+ "to 0xfed00000.\n", hpet_tbl->id);
+ hpet_address >>= 32;
+ }
+#endif
+ printk(KERN_INFO PREFIX "HPET id: %#x base: %#lx\n",
+ hpet_tbl->id, hpet_address);
+
+ /*
+ * Allocate and initialize the HPET firmware resource for adding into
+ * the resource tree during the lateinit timeframe.
+ */
+#define HPET_RESOURCE_NAME_SIZE 9
+ hpet_res = alloc_bootmem(sizeof(*hpet_res) + HPET_RESOURCE_NAME_SIZE);
+
+ hpet_res->name = (void *)&hpet_res[1];
+ hpet_res->flags = IORESOURCE_MEM;
+ snprintf((char *)hpet_res->name, HPET_RESOURCE_NAME_SIZE, "HPET %u",
+ hpet_tbl->sequence);
+
+ hpet_res->start = hpet_address;
+ hpet_res->end = hpet_address + (1 * 1024) - 1;
+
+ return 0;
+}
+
+/*
+ * hpet_insert_resource inserts the HPET resources used into the resource
+ * tree.
+ */
+static __init int hpet_insert_resource(void)
+{
+ if (!hpet_res)
+ return 1;
+
+ return insert_resource(&iomem_resource, hpet_res);
+}
+
+late_initcall(hpet_insert_resource);
+
+#else
+#define acpi_parse_hpet NULL
+#endif
+
+static int __init acpi_parse_fadt(struct acpi_table_header *table)
+{
+
+#ifdef CONFIG_X86_PM_TIMER
+ /* detect the location of the ACPI PM Timer */
+ if (acpi_gbl_FADT.header.revision >= FADT2_REVISION_ID) {
+ /* FADT rev. 2 */
+ if (acpi_gbl_FADT.xpm_timer_block.space_id !=
+ ACPI_ADR_SPACE_SYSTEM_IO)
+ return 0;
+
+ pmtmr_ioport = acpi_gbl_FADT.xpm_timer_block.address;
+ /*
+ * "X" fields are optional extensions to the original V1.0
+ * fields, so we must selectively expand V1.0 fields if the
+ * corresponding X field is zero.
+ */
+ if (!pmtmr_ioport)
+ pmtmr_ioport = acpi_gbl_FADT.pm_timer_block;
+ } else {
+ /* FADT rev. 1 */
+ pmtmr_ioport = acpi_gbl_FADT.pm_timer_block;
+ }
+ if (pmtmr_ioport)
+ printk(KERN_INFO PREFIX "PM-Timer IO Port: %#x\n",
+ pmtmr_ioport);
+#endif
+ return 0;
+}
+
+#ifdef CONFIG_X86_LOCAL_APIC
+/*
+ * Parse LAPIC entries in MADT
+ * returns 0 on success, < 0 on error
+ */
+
+static int __init early_acpi_parse_madt_lapic_addr_ovr(void)
+{
+ int count;
+
+ if (!cpu_has_apic)
+ return -ENODEV;
+
+ /*
+ * Note that the LAPIC address is obtained from the MADT (32-bit value)
+ * and (optionally) overriden by a LAPIC_ADDR_OVR entry (64-bit value).
+ */
+
+ count = acpi_table_parse_madt(ACPI_MADT_TYPE_LOCAL_APIC_OVERRIDE,
+ acpi_parse_lapic_addr_ovr, 0);
+ if (count < 0) {
+ printk(KERN_ERR PREFIX
+ "Error parsing LAPIC address override entry\n");
+ return count;
+ }
+
+ register_lapic_address(acpi_lapic_addr);
+
+ return count;
+}
+
+static int __init acpi_parse_madt_lapic_entries(void)
+{
+ int count;
+ int x2count = 0;
+
+ if (!cpu_has_apic)
+ return -ENODEV;
+
+ /*
+ * Note that the LAPIC address is obtained from the MADT (32-bit value)
+ * and (optionally) overriden by a LAPIC_ADDR_OVR entry (64-bit value).
+ */
+
+ count = acpi_table_parse_madt(ACPI_MADT_TYPE_LOCAL_APIC_OVERRIDE,
+ acpi_parse_lapic_addr_ovr, 0);
+ if (count < 0) {
+ printk(KERN_ERR PREFIX
+ "Error parsing LAPIC address override entry\n");
+ return count;
+ }
+
+ register_lapic_address(acpi_lapic_addr);
+
+ count = acpi_table_parse_madt(ACPI_MADT_TYPE_LOCAL_SAPIC,
+ acpi_parse_sapic, MAX_LOCAL_APIC);
+
+ if (!count) {
+ x2count = acpi_table_parse_madt(ACPI_MADT_TYPE_LOCAL_X2APIC,
+ acpi_parse_x2apic, MAX_LOCAL_APIC);
+ count = acpi_table_parse_madt(ACPI_MADT_TYPE_LOCAL_APIC,
+ acpi_parse_lapic, MAX_LOCAL_APIC);
+ }
+ if (!count && !x2count) {
+ printk(KERN_ERR PREFIX "No LAPIC entries present\n");
+ /* TBD: Cleanup to allow fallback to MPS */
+ return -ENODEV;
+ } else if (count < 0 || x2count < 0) {
+ printk(KERN_ERR PREFIX "Error parsing LAPIC entry\n");
+ /* TBD: Cleanup to allow fallback to MPS */
+ return count;
+ }
+
+ x2count = acpi_table_parse_madt(ACPI_MADT_TYPE_LOCAL_X2APIC_NMI,
+ acpi_parse_x2apic_nmi, 0);
+ count = acpi_table_parse_madt(ACPI_MADT_TYPE_LOCAL_APIC_NMI,
+ acpi_parse_lapic_nmi, 0);
+ if (count < 0 || x2count < 0) {
+ printk(KERN_ERR PREFIX "Error parsing LAPIC NMI entry\n");
+ /* TBD: Cleanup to allow fallback to MPS */
+ return count;
+ }
+ return 0;
+}
+#endif /* CONFIG_X86_LOCAL_APIC */
+
+#ifdef CONFIG_X86_IO_APIC
+static void __init mp_config_acpi_legacy_irqs(void)
+{
+ int i;
+ struct mpc_intsrc mp_irq;
+
+#ifdef CONFIG_EISA
+ /*
+ * Fabricate the legacy ISA bus (bus #31).
+ */
+ mp_bus_id_to_type[MP_ISA_BUS] = MP_BUS_ISA;
+#endif
+ set_bit(MP_ISA_BUS, mp_bus_not_pci);
+ pr_debug("Bus #%d is ISA\n", MP_ISA_BUS);
+
+ /*
+ * Use the default configuration for the IRQs 0-15. Unless
+ * overridden by (MADT) interrupt source override entries.
+ */
+ for (i = 0; i < nr_legacy_irqs(); i++) {
+ int ioapic, pin;
+ unsigned int dstapic;
+ int idx;
+ u32 gsi;
+
+ /* Locate the gsi that irq i maps to. */
+ if (acpi_isa_irq_to_gsi(i, &gsi))
+ continue;
+
+ /*
+ * Locate the IOAPIC that manages the ISA IRQ.
+ */
+ ioapic = mp_find_ioapic(gsi);
+ if (ioapic < 0)
+ continue;
+ pin = mp_find_ioapic_pin(ioapic, gsi);
+ dstapic = mpc_ioapic_id(ioapic);
+
+ for (idx = 0; idx < mp_irq_entries; idx++) {
+ struct mpc_intsrc *irq = mp_irqs + idx;
+
+ /* Do we already have a mapping for this ISA IRQ? */
+ if (irq->srcbus == MP_ISA_BUS && irq->srcbusirq == i)
+ break;
+
+ /* Do we already have a mapping for this IOAPIC pin */
+ if (irq->dstapic == dstapic && irq->dstirq == pin)
+ break;
+ }
+
+ if (idx != mp_irq_entries) {
+ printk(KERN_DEBUG "ACPI: IRQ%d used by override.\n", i);
+ continue; /* IRQ already used */
+ }
+
+ mp_irq.type = MP_INTSRC;
+ mp_irq.irqflag = 0; /* Conforming */
+ mp_irq.srcbus = MP_ISA_BUS;
+ mp_irq.dstapic = dstapic;
+ mp_irq.irqtype = mp_INT;
+ mp_irq.srcbusirq = i; /* Identity mapped */
+ mp_irq.dstirq = pin;
+
+ mp_save_irq(&mp_irq);
+ }
+}
+
+/*
+ * Parse IOAPIC related entries in MADT
+ * returns 0 on success, < 0 on error
+ */
+static int __init acpi_parse_madt_ioapic_entries(void)
+{
+ int count;
+
+ /*
+ * ACPI interpreter is required to complete interrupt setup,
+ * so if it is off, don't enumerate the io-apics with ACPI.
+ * If MPS is present, it will handle them,
+ * otherwise the system will stay in PIC mode
+ */
+ if (acpi_disabled || acpi_noirq)
+ return -ENODEV;
+
+ if (!cpu_has_apic)
+ return -ENODEV;
+
+ /*
+ * if "noapic" boot option, don't look for IO-APICs
+ */
+ if (skip_ioapic_setup) {
+ printk(KERN_INFO PREFIX "Skipping IOAPIC probe "
+ "due to 'noapic' option.\n");
+ return -ENODEV;
+ }
+
+ count = acpi_table_parse_madt(ACPI_MADT_TYPE_IO_APIC, acpi_parse_ioapic,
+ MAX_IO_APICS);
+ if (!count) {
+ printk(KERN_ERR PREFIX "No IOAPIC entries present\n");
+ return -ENODEV;
+ } else if (count < 0) {
+ printk(KERN_ERR PREFIX "Error parsing IOAPIC entry\n");
+ return count;
+ }
+
+ count = acpi_table_parse_madt(ACPI_MADT_TYPE_INTERRUPT_OVERRIDE,
+ acpi_parse_int_src_ovr, nr_irqs);
+ if (count < 0) {
+ printk(KERN_ERR PREFIX
+ "Error parsing interrupt source overrides entry\n");
+ /* TBD: Cleanup to allow fallback to MPS */
+ return count;
+ }
+
+ /*
+ * If BIOS did not supply an INT_SRC_OVR for the SCI
+ * pretend we got one so we can set the SCI flags.
+ */
+ if (!acpi_sci_override_gsi)
+ acpi_sci_ioapic_setup(acpi_gbl_FADT.sci_interrupt, 0, 0,
+ acpi_gbl_FADT.sci_interrupt);
+
+ /* Fill in identity legacy mappings where no override */
+ mp_config_acpi_legacy_irqs();
+
+ count = acpi_table_parse_madt(ACPI_MADT_TYPE_NMI_SOURCE,
+ acpi_parse_nmi_src, nr_irqs);
+ if (count < 0) {
+ printk(KERN_ERR PREFIX "Error parsing NMI SRC entry\n");
+ /* TBD: Cleanup to allow fallback to MPS */
+ return count;
+ }
+
+ return 0;
+}
+#else
+static inline int acpi_parse_madt_ioapic_entries(void)
+{
+ return -1;
+}
+#endif /* !CONFIG_X86_IO_APIC */
+
+static void __init early_acpi_process_madt(void)
+{
+#ifdef CONFIG_X86_LOCAL_APIC
+ int error;
+
+ if (!acpi_table_parse(ACPI_SIG_MADT, acpi_parse_madt)) {
+
+ /*
+ * Parse MADT LAPIC entries
+ */
+ error = early_acpi_parse_madt_lapic_addr_ovr();
+ if (!error) {
+ acpi_lapic = 1;
+ smp_found_config = 1;
+ }
+ if (error == -EINVAL) {
+ /*
+ * Dell Precision Workstation 410, 610 come here.
+ */
+ printk(KERN_ERR PREFIX
+ "Invalid BIOS MADT, disabling ACPI\n");
+ disable_acpi();
+ }
+ }
+#endif
+}
+
+static void __init acpi_process_madt(void)
+{
+#ifdef CONFIG_X86_LOCAL_APIC
+ int error;
+
+ if (!acpi_table_parse(ACPI_SIG_MADT, acpi_parse_madt)) {
+
+ /*
+ * Parse MADT LAPIC entries
+ */
+ error = acpi_parse_madt_lapic_entries();
+ if (!error) {
+ acpi_lapic = 1;
+
+ /*
+ * Parse MADT IO-APIC entries
+ */
+ mutex_lock(&acpi_ioapic_lock);
+ error = acpi_parse_madt_ioapic_entries();
+ mutex_unlock(&acpi_ioapic_lock);
+ if (!error) {
+ acpi_set_irq_model_ioapic();
+
+ smp_found_config = 1;
+ }
+ }
+ if (error == -EINVAL) {
+ /*
+ * Dell Precision Workstation 410, 610 come here.
+ */
+ printk(KERN_ERR PREFIX
+ "Invalid BIOS MADT, disabling ACPI\n");
+ disable_acpi();
+ }
+ } else {
+ /*
+ * ACPI found no MADT, and so ACPI wants UP PIC mode.
+ * In the event an MPS table was found, forget it.
+ * Boot with "acpi=off" to use MPS on such a system.
+ */
+ if (smp_found_config) {
+ printk(KERN_WARNING PREFIX
+ "No APIC-table, disabling MPS\n");
+ smp_found_config = 0;
+ }
+ }
+
+ /*
+ * ACPI supports both logical (e.g. Hyper-Threading) and physical
+ * processors, where MPS only supports physical.
+ */
+ if (acpi_lapic && acpi_ioapic)
+ printk(KERN_INFO "Using ACPI (MADT) for SMP configuration "
+ "information\n");
+ else if (acpi_lapic)
+ printk(KERN_INFO "Using ACPI for processor (LAPIC) "
+ "configuration information\n");
+#endif
+ return;
+}
+
+static int __init disable_acpi_irq(const struct dmi_system_id *d)
+{
+ if (!acpi_force) {
+ printk(KERN_NOTICE "%s detected: force use of acpi=noirq\n",
+ d->ident);
+ acpi_noirq_set();
+ }
+ return 0;
+}
+
+static int __init disable_acpi_pci(const struct dmi_system_id *d)
+{
+ if (!acpi_force) {
+ printk(KERN_NOTICE "%s detected: force use of pci=noacpi\n",
+ d->ident);
+ acpi_disable_pci();
+ }
+ return 0;
+}
+
+static int __init dmi_disable_acpi(const struct dmi_system_id *d)
+{
+ if (!acpi_force) {
+ printk(KERN_NOTICE "%s detected: acpi off\n", d->ident);
+ disable_acpi();
+ } else {
+ printk(KERN_NOTICE
+ "Warning: DMI blacklist says broken, but acpi forced\n");
+ }
+ return 0;
+}
+
+/*
+ * Force ignoring BIOS IRQ0 override
+ */
+static int __init dmi_ignore_irq0_timer_override(const struct dmi_system_id *d)
+{
+ if (!acpi_skip_timer_override) {
+ pr_notice("%s detected: Ignoring BIOS IRQ0 override\n",
+ d->ident);
+ acpi_skip_timer_override = 1;
+ }
+ return 0;
+}
+
+/*
+ * ACPI offers an alternative platform interface model that removes
+ * ACPI hardware requirements for platforms that do not implement
+ * the PC Architecture.
+ *
+ * We initialize the Hardware-reduced ACPI model here:
+ */
+static void __init acpi_reduced_hw_init(void)
+{
+ if (acpi_gbl_reduced_hardware) {
+ /*
+ * Override x86_init functions and bypass legacy pic
+ * in Hardware-reduced ACPI mode
+ */
+ x86_init.timers.timer_init = x86_init_noop;
+ x86_init.irqs.pre_vector_init = x86_init_noop;
+ legacy_pic = &null_legacy_pic;
+ }
+}
+
+/*
+ * If your system is blacklisted here, but you find that acpi=force
+ * works for you, please contact linux-acpi@vger.kernel.org
+ */
+static struct dmi_system_id __initdata acpi_dmi_table[] = {
+ /*
+ * Boxes that need ACPI disabled
+ */
+ {
+ .callback = dmi_disable_acpi,
+ .ident = "IBM Thinkpad",
+ .matches = {
+ DMI_MATCH(DMI_BOARD_VENDOR, "IBM"),
+ DMI_MATCH(DMI_BOARD_NAME, "2629H1G"),
+ },
+ },
+
+ /*
+ * Boxes that need ACPI PCI IRQ routing disabled
+ */
+ {
+ .callback = disable_acpi_irq,
+ .ident = "ASUS A7V",
+ .matches = {
+ DMI_MATCH(DMI_BOARD_VENDOR, "ASUSTeK Computer INC"),
+ DMI_MATCH(DMI_BOARD_NAME, "<A7V>"),
+ /* newer BIOS, Revision 1011, does work */
+ DMI_MATCH(DMI_BIOS_VERSION,
+ "ASUS A7V ACPI BIOS Revision 1007"),
+ },
+ },
+ {
+ /*
+ * Latest BIOS for IBM 600E (1.16) has bad pcinum
+ * for LPC bridge, which is needed for the PCI
+ * interrupt links to work. DSDT fix is in bug 5966.
+ * 2645, 2646 model numbers are shared with 600/600E/600X
+ */
+ .callback = disable_acpi_irq,
+ .ident = "IBM Thinkpad 600 Series 2645",
+ .matches = {
+ DMI_MATCH(DMI_BOARD_VENDOR, "IBM"),
+ DMI_MATCH(DMI_BOARD_NAME, "2645"),
+ },
+ },
+ {
+ .callback = disable_acpi_irq,
+ .ident = "IBM Thinkpad 600 Series 2646",
+ .matches = {
+ DMI_MATCH(DMI_BOARD_VENDOR, "IBM"),
+ DMI_MATCH(DMI_BOARD_NAME, "2646"),
+ },
+ },
+ /*
+ * Boxes that need ACPI PCI IRQ routing and PCI scan disabled
+ */
+ { /* _BBN 0 bug */
+ .callback = disable_acpi_pci,
+ .ident = "ASUS PR-DLS",
+ .matches = {
+ DMI_MATCH(DMI_BOARD_VENDOR, "ASUSTeK Computer INC."),
+ DMI_MATCH(DMI_BOARD_NAME, "PR-DLS"),
+ DMI_MATCH(DMI_BIOS_VERSION,
+ "ASUS PR-DLS ACPI BIOS Revision 1010"),
+ DMI_MATCH(DMI_BIOS_DATE, "03/21/2003")
+ },
+ },
+ {
+ .callback = disable_acpi_pci,
+ .ident = "Acer TravelMate 36x Laptop",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "Acer"),
+ DMI_MATCH(DMI_PRODUCT_NAME, "TravelMate 360"),
+ },
+ },
+ /* ThinkPad Edge 11 (AMD) */
+ {
+ .callback = dmi_ignore_irq0_timer_override,
+ .ident = "ThinkPad Edge",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "LENOVO"),
+ DMI_MATCH(DMI_PRODUCT_NAME, "254523U"),
+ },
+ },
+ /* ThinkPad Edge 13 (AMD) */
+ {
+ .callback = dmi_ignore_irq0_timer_override,
+ .ident = "ThinkPad Edge",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "LENOVO"),
+ DMI_MATCH(DMI_PRODUCT_NAME, "022120U"),
+ },
+ },
+ /* ThinkPad Edge 14 (AMD) */
+ {
+ .callback = dmi_ignore_irq0_timer_override,
+ .ident = "ThinkPad Edge",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "LENOVO"),
+ DMI_MATCH(DMI_PRODUCT_NAME, "019923U"),
+ },
+ },
+ /* ThinkPad Edge 15 (AMD) */
+ {
+ .callback = dmi_ignore_irq0_timer_override,
+ .ident = "ThinkPad Edge",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "LENOVO"),
+ DMI_MATCH(DMI_PRODUCT_NAME, "030222U"),
+ },
+ },
+ {}
+};
+
+/* second table for DMI checks that should run after early-quirks */
+static struct dmi_system_id __initdata acpi_dmi_table_late[] = {
+ /*
+ * HP laptops which use a DSDT reporting as HP/SB400/10000,
+ * which includes some code which overrides all temperature
+ * trip points to 16C if the INTIN2 input of the I/O APIC
+ * is enabled. This input is incorrectly designated the
+ * ISA IRQ 0 via an interrupt source override even though
+ * it is wired to the output of the master 8259A and INTIN0
+ * is not connected at all. Force ignoring BIOS IRQ0
+ * override in that cases.
+ */
+ {
+ .callback = dmi_ignore_irq0_timer_override,
+ .ident = "HP nx6115 laptop",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "Hewlett-Packard"),
+ DMI_MATCH(DMI_PRODUCT_NAME, "HP Compaq nx6115"),
+ },
+ },
+ {
+ .callback = dmi_ignore_irq0_timer_override,
+ .ident = "HP NX6125 laptop",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "Hewlett-Packard"),
+ DMI_MATCH(DMI_PRODUCT_NAME, "HP Compaq nx6125"),
+ },
+ },
+ {
+ .callback = dmi_ignore_irq0_timer_override,
+ .ident = "HP NX6325 laptop",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "Hewlett-Packard"),
+ DMI_MATCH(DMI_PRODUCT_NAME, "HP Compaq nx6325"),
+ },
+ },
+ {
+ .callback = dmi_ignore_irq0_timer_override,
+ .ident = "HP 6715b laptop",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "Hewlett-Packard"),
+ DMI_MATCH(DMI_PRODUCT_NAME, "HP Compaq 6715b"),
+ },
+ },
+ {
+ .callback = dmi_ignore_irq0_timer_override,
+ .ident = "FUJITSU SIEMENS",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "FUJITSU SIEMENS"),
+ DMI_MATCH(DMI_PRODUCT_NAME, "AMILO PRO V2030"),
+ },
+ },
+ {}
+};
+
+/*
+ * acpi_boot_table_init() and acpi_boot_init()
+ * called from setup_arch(), always.
+ * 1. checksums all tables
+ * 2. enumerates lapics
+ * 3. enumerates io-apics
+ *
+ * acpi_table_init() is separate to allow reading SRAT without
+ * other side effects.
+ *
+ * side effects of acpi_boot_init:
+ * acpi_lapic = 1 if LAPIC found
+ * acpi_ioapic = 1 if IOAPIC found
+ * if (acpi_lapic && acpi_ioapic) smp_found_config = 1;
+ * if acpi_blacklisted() acpi_disabled = 1;
+ * acpi_irq_model=...
+ * ...
+ */
+
+void __init acpi_boot_table_init(void)
+{
+ dmi_check_system(acpi_dmi_table);
+
+ /*
+ * If acpi_disabled, bail out
+ */
+ if (acpi_disabled)
+ return;
+
+ /*
+ * Initialize the ACPI boot-time table parser.
+ */
+ if (acpi_table_init()) {
+ disable_acpi();
+ return;
+ }
+
+ acpi_table_parse(ACPI_SIG_BOOT, acpi_parse_sbf);
+
+ /*
+ * blacklist may disable ACPI entirely
+ */
+ if (acpi_blacklisted()) {
+ if (acpi_force) {
+ printk(KERN_WARNING PREFIX "acpi=force override\n");
+ } else {
+ printk(KERN_WARNING PREFIX "Disabling ACPI support\n");
+ disable_acpi();
+ return;
+ }
+ }
+}
+
+int __init early_acpi_boot_init(void)
+{
+ /*
+ * If acpi_disabled, bail out
+ */
+ if (acpi_disabled)
+ return 1;
+
+ /*
+ * Process the Multiple APIC Description Table (MADT), if present
+ */
+ early_acpi_process_madt();
+
+ /*
+ * Hardware-reduced ACPI mode initialization:
+ */
+ acpi_reduced_hw_init();
+
+ return 0;
+}
+
+int __init acpi_boot_init(void)
+{
+ /* those are executed after early-quirks are executed */
+ dmi_check_system(acpi_dmi_table_late);
+
+ /*
+ * If acpi_disabled, bail out
+ */
+ if (acpi_disabled)
+ return 1;
+
+ acpi_table_parse(ACPI_SIG_BOOT, acpi_parse_sbf);
+
+ /*
+ * set sci_int and PM timer address
+ */
+ acpi_table_parse(ACPI_SIG_FADT, acpi_parse_fadt);
+
+ /*
+ * Process the Multiple APIC Description Table (MADT), if present
+ */
+ acpi_process_madt();
+
+ acpi_table_parse(ACPI_SIG_HPET, acpi_parse_hpet);
+
+ if (!acpi_noirq)
+ x86_init.pci.init = pci_acpi_init;
+
+ return 0;
+}
+
+static int __init parse_acpi(char *arg)
+{
+ if (!arg)
+ return -EINVAL;
+
+ /* "acpi=off" disables both ACPI table parsing and interpreter */
+ if (strcmp(arg, "off") == 0) {
+ disable_acpi();
+ }
+ /* acpi=force to over-ride black-list */
+ else if (strcmp(arg, "force") == 0) {
+ acpi_force = 1;
+ acpi_disabled = 0;
+ }
+ /* acpi=strict disables out-of-spec workarounds */
+ else if (strcmp(arg, "strict") == 0) {
+ acpi_strict = 1;
+ }
+ /* acpi=rsdt use RSDT instead of XSDT */
+ else if (strcmp(arg, "rsdt") == 0) {
+ acpi_gbl_do_not_use_xsdt = TRUE;
+ }
+ /* "acpi=noirq" disables ACPI interrupt routing */
+ else if (strcmp(arg, "noirq") == 0) {
+ acpi_noirq_set();
+ }
+ /* "acpi=copy_dsdt" copys DSDT */
+ else if (strcmp(arg, "copy_dsdt") == 0) {
+ acpi_gbl_copy_dsdt_locally = 1;
+ }
+ /* "acpi=nocmcff" disables FF mode for corrected errors */
+ else if (strcmp(arg, "nocmcff") == 0) {
+ acpi_disable_cmcff = 1;
+ } else {
+ /* Core will printk when we return error. */
+ return -EINVAL;
+ }
+ return 0;
+}
+early_param("acpi", parse_acpi);
+
+/* FIXME: Using pci= for an ACPI parameter is a travesty. */
+static int __init parse_pci(char *arg)
+{
+ if (arg && strcmp(arg, "noacpi") == 0)
+ acpi_disable_pci();
+ return 0;
+}
+early_param("pci", parse_pci);
+
+int __init acpi_mps_check(void)
+{
+#if defined(CONFIG_X86_LOCAL_APIC) && !defined(CONFIG_X86_MPPARSE)
+/* mptable code is not built-in*/
+ if (acpi_disabled || acpi_noirq) {
+ printk(KERN_WARNING "MPS support code is not built-in.\n"
+ "Using acpi=off or acpi=noirq or pci=noacpi "
+ "may have problem\n");
+ return 1;
+ }
+#endif
+ return 0;
+}
+
+#ifdef CONFIG_X86_IO_APIC
+static int __init parse_acpi_skip_timer_override(char *arg)
+{
+ acpi_skip_timer_override = 1;
+ return 0;
+}
+early_param("acpi_skip_timer_override", parse_acpi_skip_timer_override);
+
+static int __init parse_acpi_use_timer_override(char *arg)
+{
+ acpi_use_timer_override = 1;
+ return 0;
+}
+early_param("acpi_use_timer_override", parse_acpi_use_timer_override);
+#endif /* CONFIG_X86_IO_APIC */
+
+static int __init setup_acpi_sci(char *s)
+{
+ if (!s)
+ return -EINVAL;
+ if (!strcmp(s, "edge"))
+ acpi_sci_flags = ACPI_MADT_TRIGGER_EDGE |
+ (acpi_sci_flags & ~ACPI_MADT_TRIGGER_MASK);
+ else if (!strcmp(s, "level"))
+ acpi_sci_flags = ACPI_MADT_TRIGGER_LEVEL |
+ (acpi_sci_flags & ~ACPI_MADT_TRIGGER_MASK);
+ else if (!strcmp(s, "high"))
+ acpi_sci_flags = ACPI_MADT_POLARITY_ACTIVE_HIGH |
+ (acpi_sci_flags & ~ACPI_MADT_POLARITY_MASK);
+ else if (!strcmp(s, "low"))
+ acpi_sci_flags = ACPI_MADT_POLARITY_ACTIVE_LOW |
+ (acpi_sci_flags & ~ACPI_MADT_POLARITY_MASK);
+ else
+ return -EINVAL;
+ return 0;
+}
+early_param("acpi_sci", setup_acpi_sci);
+
+int __acpi_acquire_global_lock(unsigned int *lock)
+{
+ unsigned int old, new, val;
+ do {
+ old = *lock;
+ new = (((old & ~0x3) + 2) + ((old >> 1) & 0x1));
+ val = cmpxchg(lock, old, new);
+ } while (unlikely (val != old));
+ return (new < 3) ? -1 : 0;
+}
+
+int __acpi_release_global_lock(unsigned int *lock)
+{
+ unsigned int old, new, val;
+ do {
+ old = *lock;
+ new = old & ~0x3;
+ val = cmpxchg(lock, old, new);
+ } while (unlikely (val != old));
+ return old & 0x1;
+}
+
+void __init arch_reserve_mem_area(acpi_physical_address addr, size_t size)
+{
+ e820_add_region(addr, size, E820_ACPI);
+ update_e820();
+}
diff --git a/arch/x86/kernel/acpi/cstate.c b/arch/x86/kernel/acpi/cstate.c
new file mode 100644
index 000000000..4b28159e0
--- /dev/null
+++ b/arch/x86/kernel/acpi/cstate.c
@@ -0,0 +1,183 @@
+/*
+ * Copyright (C) 2005 Intel Corporation
+ * Venkatesh Pallipadi <venkatesh.pallipadi@intel.com>
+ * - Added _PDC for SMP C-states on Intel CPUs
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/acpi.h>
+#include <linux/cpu.h>
+#include <linux/sched.h>
+
+#include <acpi/processor.h>
+#include <asm/acpi.h>
+#include <asm/mwait.h>
+#include <asm/special_insns.h>
+
+/*
+ * Initialize bm_flags based on the CPU cache properties
+ * On SMP it depends on cache configuration
+ * - When cache is not shared among all CPUs, we flush cache
+ * before entering C3.
+ * - When cache is shared among all CPUs, we use bm_check
+ * mechanism as in UP case
+ *
+ * This routine is called only after all the CPUs are online
+ */
+void acpi_processor_power_init_bm_check(struct acpi_processor_flags *flags,
+ unsigned int cpu)
+{
+ struct cpuinfo_x86 *c = &cpu_data(cpu);
+
+ flags->bm_check = 0;
+ if (num_online_cpus() == 1)
+ flags->bm_check = 1;
+ else if (c->x86_vendor == X86_VENDOR_INTEL) {
+ /*
+ * Today all MP CPUs that support C3 share cache.
+ * And caches should not be flushed by software while
+ * entering C3 type state.
+ */
+ flags->bm_check = 1;
+ }
+
+ /*
+ * On all recent Intel platforms, ARB_DISABLE is a nop.
+ * So, set bm_control to zero to indicate that ARB_DISABLE
+ * is not required while entering C3 type state on
+ * P4, Core and beyond CPUs
+ */
+ if (c->x86_vendor == X86_VENDOR_INTEL &&
+ (c->x86 > 0xf || (c->x86 == 6 && c->x86_model >= 0x0f)))
+ flags->bm_control = 0;
+}
+EXPORT_SYMBOL(acpi_processor_power_init_bm_check);
+
+/* The code below handles cstate entry with monitor-mwait pair on Intel*/
+
+struct cstate_entry {
+ struct {
+ unsigned int eax;
+ unsigned int ecx;
+ } states[ACPI_PROCESSOR_MAX_POWER];
+};
+static struct cstate_entry __percpu *cpu_cstate_entry; /* per CPU ptr */
+
+static short mwait_supported[ACPI_PROCESSOR_MAX_POWER];
+
+#define NATIVE_CSTATE_BEYOND_HALT (2)
+
+static long acpi_processor_ffh_cstate_probe_cpu(void *_cx)
+{
+ struct acpi_processor_cx *cx = _cx;
+ long retval;
+ unsigned int eax, ebx, ecx, edx;
+ unsigned int edx_part;
+ unsigned int cstate_type; /* C-state type and not ACPI C-state type */
+ unsigned int num_cstate_subtype;
+
+ cpuid(CPUID_MWAIT_LEAF, &eax, &ebx, &ecx, &edx);
+
+ /* Check whether this particular cx_type (in CST) is supported or not */
+ cstate_type = ((cx->address >> MWAIT_SUBSTATE_SIZE) &
+ MWAIT_CSTATE_MASK) + 1;
+ edx_part = edx >> (cstate_type * MWAIT_SUBSTATE_SIZE);
+ num_cstate_subtype = edx_part & MWAIT_SUBSTATE_MASK;
+
+ retval = 0;
+ /* If the HW does not support any sub-states in this C-state */
+ if (num_cstate_subtype == 0) {
+ pr_warn(FW_BUG "ACPI MWAIT C-state 0x%x not supported by HW (0x%x)\n", cx->address, edx_part);
+ retval = -1;
+ goto out;
+ }
+
+ /* mwait ecx extensions INTERRUPT_BREAK should be supported for C2/C3 */
+ if (!(ecx & CPUID5_ECX_EXTENSIONS_SUPPORTED) ||
+ !(ecx & CPUID5_ECX_INTERRUPT_BREAK)) {
+ retval = -1;
+ goto out;
+ }
+
+ if (!mwait_supported[cstate_type]) {
+ mwait_supported[cstate_type] = 1;
+ printk(KERN_DEBUG
+ "Monitor-Mwait will be used to enter C-%d "
+ "state\n", cx->type);
+ }
+ snprintf(cx->desc,
+ ACPI_CX_DESC_LEN, "ACPI FFH INTEL MWAIT 0x%x",
+ cx->address);
+out:
+ return retval;
+}
+
+int acpi_processor_ffh_cstate_probe(unsigned int cpu,
+ struct acpi_processor_cx *cx, struct acpi_power_register *reg)
+{
+ struct cstate_entry *percpu_entry;
+ struct cpuinfo_x86 *c = &cpu_data(cpu);
+ long retval;
+
+ if (!cpu_cstate_entry || c->cpuid_level < CPUID_MWAIT_LEAF)
+ return -1;
+
+ if (reg->bit_offset != NATIVE_CSTATE_BEYOND_HALT)
+ return -1;
+
+ percpu_entry = per_cpu_ptr(cpu_cstate_entry, cpu);
+ percpu_entry->states[cx->index].eax = 0;
+ percpu_entry->states[cx->index].ecx = 0;
+
+ /* Make sure we are running on right CPU */
+
+ retval = work_on_cpu(cpu, acpi_processor_ffh_cstate_probe_cpu, cx);
+ if (retval == 0) {
+ /* Use the hint in CST */
+ percpu_entry->states[cx->index].eax = cx->address;
+ percpu_entry->states[cx->index].ecx = MWAIT_ECX_INTERRUPT_BREAK;
+ }
+
+ /*
+ * For _CST FFH on Intel, if GAS.access_size bit 1 is cleared,
+ * then we should skip checking BM_STS for this C-state.
+ * ref: "Intel Processor Vendor-Specific ACPI Interface Specification"
+ */
+ if ((c->x86_vendor == X86_VENDOR_INTEL) && !(reg->access_size & 0x2))
+ cx->bm_sts_skip = 1;
+
+ return retval;
+}
+EXPORT_SYMBOL_GPL(acpi_processor_ffh_cstate_probe);
+
+void acpi_processor_ffh_cstate_enter(struct acpi_processor_cx *cx)
+{
+ unsigned int cpu = smp_processor_id();
+ struct cstate_entry *percpu_entry;
+
+ percpu_entry = per_cpu_ptr(cpu_cstate_entry, cpu);
+ mwait_idle_with_hints(percpu_entry->states[cx->index].eax,
+ percpu_entry->states[cx->index].ecx);
+}
+EXPORT_SYMBOL_GPL(acpi_processor_ffh_cstate_enter);
+
+static int __init ffh_cstate_init(void)
+{
+ struct cpuinfo_x86 *c = &boot_cpu_data;
+ if (c->x86_vendor != X86_VENDOR_INTEL)
+ return -1;
+
+ cpu_cstate_entry = alloc_percpu(struct cstate_entry);
+ return 0;
+}
+
+static void __exit ffh_cstate_exit(void)
+{
+ free_percpu(cpu_cstate_entry);
+ cpu_cstate_entry = NULL;
+}
+
+arch_initcall(ffh_cstate_init);
+__exitcall(ffh_cstate_exit);
diff --git a/arch/x86/kernel/acpi/sleep.c b/arch/x86/kernel/acpi/sleep.c
new file mode 100644
index 000000000..d1daead5f
--- /dev/null
+++ b/arch/x86/kernel/acpi/sleep.c
@@ -0,0 +1,140 @@
+/*
+ * sleep.c - x86-specific ACPI sleep support.
+ *
+ * Copyright (C) 2001-2003 Patrick Mochel
+ * Copyright (C) 2001-2003 Pavel Machek <pavel@ucw.cz>
+ */
+
+#include <linux/acpi.h>
+#include <linux/bootmem.h>
+#include <linux/memblock.h>
+#include <linux/dmi.h>
+#include <linux/cpumask.h>
+#include <asm/segment.h>
+#include <asm/desc.h>
+#include <asm/pgtable.h>
+#include <asm/cacheflush.h>
+#include <asm/realmode.h>
+
+#include "../../realmode/rm/wakeup.h"
+#include "sleep.h"
+
+unsigned long acpi_realmode_flags;
+
+#if defined(CONFIG_SMP) && defined(CONFIG_64BIT)
+static char temp_stack[4096];
+#endif
+
+/**
+ * x86_acpi_enter_sleep_state - enter sleep state
+ * @state: Sleep state to enter.
+ *
+ * Wrapper around acpi_enter_sleep_state() to be called by assmebly.
+ */
+acpi_status asmlinkage __visible x86_acpi_enter_sleep_state(u8 state)
+{
+ return acpi_enter_sleep_state(state);
+}
+
+/**
+ * x86_acpi_suspend_lowlevel - save kernel state
+ *
+ * Create an identity mapped page table and copy the wakeup routine to
+ * low memory.
+ */
+int x86_acpi_suspend_lowlevel(void)
+{
+ struct wakeup_header *header =
+ (struct wakeup_header *) __va(real_mode_header->wakeup_header);
+
+ if (header->signature != WAKEUP_HEADER_SIGNATURE) {
+ printk(KERN_ERR "wakeup header does not match\n");
+ return -EINVAL;
+ }
+
+ header->video_mode = saved_video_mode;
+
+ header->pmode_behavior = 0;
+
+#ifndef CONFIG_64BIT
+ native_store_gdt((struct desc_ptr *)&header->pmode_gdt);
+
+ /*
+ * We have to check that we can write back the value, and not
+ * just read it. At least on 90 nm Pentium M (Family 6, Model
+ * 13), reading an invalid MSR is not guaranteed to trap, see
+ * Erratum X4 in "Intel Pentium M Processor on 90 nm Process
+ * with 2-MB L2 Cache and IntelĀ® Processor A100 and A110 on 90
+ * nm process with 512-KB L2 Cache Specification Update".
+ */
+ if (!rdmsr_safe(MSR_EFER,
+ &header->pmode_efer_low,
+ &header->pmode_efer_high) &&
+ !wrmsr_safe(MSR_EFER,
+ header->pmode_efer_low,
+ header->pmode_efer_high))
+ header->pmode_behavior |= (1 << WAKEUP_BEHAVIOR_RESTORE_EFER);
+#endif /* !CONFIG_64BIT */
+
+ header->pmode_cr0 = read_cr0();
+ if (__this_cpu_read(cpu_info.cpuid_level) >= 0) {
+ header->pmode_cr4 = __read_cr4();
+ header->pmode_behavior |= (1 << WAKEUP_BEHAVIOR_RESTORE_CR4);
+ }
+ if (!rdmsr_safe(MSR_IA32_MISC_ENABLE,
+ &header->pmode_misc_en_low,
+ &header->pmode_misc_en_high) &&
+ !wrmsr_safe(MSR_IA32_MISC_ENABLE,
+ header->pmode_misc_en_low,
+ header->pmode_misc_en_high))
+ header->pmode_behavior |=
+ (1 << WAKEUP_BEHAVIOR_RESTORE_MISC_ENABLE);
+ header->realmode_flags = acpi_realmode_flags;
+ header->real_magic = 0x12345678;
+
+#ifndef CONFIG_64BIT
+ header->pmode_entry = (u32)&wakeup_pmode_return;
+ header->pmode_cr3 = (u32)__pa_symbol(initial_page_table);
+ saved_magic = 0x12345678;
+#else /* CONFIG_64BIT */
+#ifdef CONFIG_SMP
+ stack_start = (unsigned long)temp_stack + sizeof(temp_stack);
+ early_gdt_descr.address =
+ (unsigned long)get_cpu_gdt_table(smp_processor_id());
+ initial_gs = per_cpu_offset(smp_processor_id());
+#endif
+ initial_code = (unsigned long)wakeup_long64;
+ saved_magic = 0x123456789abcdef0L;
+#endif /* CONFIG_64BIT */
+
+ do_suspend_lowlevel();
+ return 0;
+}
+
+static int __init acpi_sleep_setup(char *str)
+{
+ while ((str != NULL) && (*str != '\0')) {
+ if (strncmp(str, "s3_bios", 7) == 0)
+ acpi_realmode_flags |= 1;
+ if (strncmp(str, "s3_mode", 7) == 0)
+ acpi_realmode_flags |= 2;
+ if (strncmp(str, "s3_beep", 7) == 0)
+ acpi_realmode_flags |= 4;
+#ifdef CONFIG_HIBERNATION
+ if (strncmp(str, "s4_nohwsig", 10) == 0)
+ acpi_no_s4_hw_signature();
+#endif
+ if (strncmp(str, "nonvs", 5) == 0)
+ acpi_nvs_nosave();
+ if (strncmp(str, "nonvs_s3", 8) == 0)
+ acpi_nvs_nosave_s3();
+ if (strncmp(str, "old_ordering", 12) == 0)
+ acpi_old_suspend_ordering();
+ str = strchr(str, ',');
+ if (str != NULL)
+ str += strspn(str, ", \t");
+ }
+ return 1;
+}
+
+__setup("acpi_sleep=", acpi_sleep_setup);
diff --git a/arch/x86/kernel/acpi/sleep.h b/arch/x86/kernel/acpi/sleep.h
new file mode 100644
index 000000000..65c7b606b
--- /dev/null
+++ b/arch/x86/kernel/acpi/sleep.h
@@ -0,0 +1,21 @@
+/*
+ * Variables and functions used by the code in sleep.c
+ */
+
+#include <asm/realmode.h>
+
+extern unsigned long saved_video_mode;
+extern long saved_magic;
+
+extern int wakeup_pmode_return;
+
+extern u8 wake_sleep_flags;
+
+extern unsigned long acpi_copy_wakeup_routine(unsigned long);
+extern void wakeup_long64(void);
+
+extern void do_suspend_lowlevel(void);
+
+extern int x86_acpi_suspend_lowlevel(void);
+
+acpi_status asmlinkage x86_acpi_enter_sleep_state(u8 state);
diff --git a/arch/x86/kernel/acpi/wakeup_32.S b/arch/x86/kernel/acpi/wakeup_32.S
new file mode 100644
index 000000000..665c6b7d2
--- /dev/null
+++ b/arch/x86/kernel/acpi/wakeup_32.S
@@ -0,0 +1,97 @@
+ .text
+#include <linux/linkage.h>
+#include <asm/segment.h>
+#include <asm/page_types.h>
+
+# Copyright 2003, 2008 Pavel Machek <pavel@suse.cz>, distribute under GPLv2
+
+ .code32
+ ALIGN
+
+ENTRY(wakeup_pmode_return)
+wakeup_pmode_return:
+ movw $__KERNEL_DS, %ax
+ movw %ax, %ss
+ movw %ax, %ds
+ movw %ax, %es
+ movw %ax, %fs
+ movw %ax, %gs
+
+ # reload the gdt, as we need the full 32 bit address
+ lidt saved_idt
+ lldt saved_ldt
+ ljmp $(__KERNEL_CS), $1f
+1:
+ movl %cr3, %eax
+ movl %eax, %cr3
+ wbinvd
+
+ # and restore the stack ... but you need gdt for this to work
+ movl saved_context_esp, %esp
+
+ movl %cs:saved_magic, %eax
+ cmpl $0x12345678, %eax
+ jne bogus_magic
+
+ # jump to place where we left off
+ movl saved_eip, %eax
+ jmp *%eax
+
+bogus_magic:
+ jmp bogus_magic
+
+
+
+save_registers:
+ sidt saved_idt
+ sldt saved_ldt
+ str saved_tss
+
+ leal 4(%esp), %eax
+ movl %eax, saved_context_esp
+ movl %ebx, saved_context_ebx
+ movl %ebp, saved_context_ebp
+ movl %esi, saved_context_esi
+ movl %edi, saved_context_edi
+ pushfl
+ popl saved_context_eflags
+
+ movl $ret_point, saved_eip
+ ret
+
+
+restore_registers:
+ movl saved_context_ebp, %ebp
+ movl saved_context_ebx, %ebx
+ movl saved_context_esi, %esi
+ movl saved_context_edi, %edi
+ pushl saved_context_eflags
+ popfl
+ ret
+
+ENTRY(do_suspend_lowlevel)
+ call save_processor_state
+ call save_registers
+ pushl $3
+ call x86_acpi_enter_sleep_state
+ addl $4, %esp
+
+# In case of S3 failure, we'll emerge here. Jump
+# to ret_point to recover
+ jmp ret_point
+ .p2align 4,,7
+ret_point:
+ call restore_registers
+ call restore_processor_state
+ ret
+
+.data
+ALIGN
+ENTRY(saved_magic) .long 0
+ENTRY(saved_eip) .long 0
+
+# saved registers
+saved_idt: .long 0,0
+saved_ldt: .long 0
+saved_tss: .long 0
+
diff --git a/arch/x86/kernel/acpi/wakeup_64.S b/arch/x86/kernel/acpi/wakeup_64.S
new file mode 100644
index 000000000..ae693b51e
--- /dev/null
+++ b/arch/x86/kernel/acpi/wakeup_64.S
@@ -0,0 +1,124 @@
+.text
+#include <linux/linkage.h>
+#include <asm/segment.h>
+#include <asm/pgtable_types.h>
+#include <asm/page_types.h>
+#include <asm/msr.h>
+#include <asm/asm-offsets.h>
+
+# Copyright 2003 Pavel Machek <pavel@suse.cz>, distribute under GPLv2
+
+.code64
+ /*
+ * Hooray, we are in Long 64-bit mode (but still running in low memory)
+ */
+ENTRY(wakeup_long64)
+ movq saved_magic, %rax
+ movq $0x123456789abcdef0, %rdx
+ cmpq %rdx, %rax
+ jne bogus_64_magic
+
+ movw $__KERNEL_DS, %ax
+ movw %ax, %ss
+ movw %ax, %ds
+ movw %ax, %es
+ movw %ax, %fs
+ movw %ax, %gs
+ movq saved_rsp, %rsp
+
+ movq saved_rbx, %rbx
+ movq saved_rdi, %rdi
+ movq saved_rsi, %rsi
+ movq saved_rbp, %rbp
+
+ movq saved_rip, %rax
+ jmp *%rax
+ENDPROC(wakeup_long64)
+
+bogus_64_magic:
+ jmp bogus_64_magic
+
+ENTRY(do_suspend_lowlevel)
+ subq $8, %rsp
+ xorl %eax, %eax
+ call save_processor_state
+
+ movq $saved_context, %rax
+ movq %rsp, pt_regs_sp(%rax)
+ movq %rbp, pt_regs_bp(%rax)
+ movq %rsi, pt_regs_si(%rax)
+ movq %rdi, pt_regs_di(%rax)
+ movq %rbx, pt_regs_bx(%rax)
+ movq %rcx, pt_regs_cx(%rax)
+ movq %rdx, pt_regs_dx(%rax)
+ movq %r8, pt_regs_r8(%rax)
+ movq %r9, pt_regs_r9(%rax)
+ movq %r10, pt_regs_r10(%rax)
+ movq %r11, pt_regs_r11(%rax)
+ movq %r12, pt_regs_r12(%rax)
+ movq %r13, pt_regs_r13(%rax)
+ movq %r14, pt_regs_r14(%rax)
+ movq %r15, pt_regs_r15(%rax)
+ pushfq
+ popq pt_regs_flags(%rax)
+
+ movq $resume_point, saved_rip(%rip)
+
+ movq %rsp, saved_rsp
+ movq %rbp, saved_rbp
+ movq %rbx, saved_rbx
+ movq %rdi, saved_rdi
+ movq %rsi, saved_rsi
+
+ addq $8, %rsp
+ movl $3, %edi
+ xorl %eax, %eax
+ call x86_acpi_enter_sleep_state
+ /* in case something went wrong, restore the machine status and go on */
+ jmp resume_point
+
+ .align 4
+resume_point:
+ /* We don't restore %rax, it must be 0 anyway */
+ movq $saved_context, %rax
+ movq saved_context_cr4(%rax), %rbx
+ movq %rbx, %cr4
+ movq saved_context_cr3(%rax), %rbx
+ movq %rbx, %cr3
+ movq saved_context_cr2(%rax), %rbx
+ movq %rbx, %cr2
+ movq saved_context_cr0(%rax), %rbx
+ movq %rbx, %cr0
+ pushq pt_regs_flags(%rax)
+ popfq
+ movq pt_regs_sp(%rax), %rsp
+ movq pt_regs_bp(%rax), %rbp
+ movq pt_regs_si(%rax), %rsi
+ movq pt_regs_di(%rax), %rdi
+ movq pt_regs_bx(%rax), %rbx
+ movq pt_regs_cx(%rax), %rcx
+ movq pt_regs_dx(%rax), %rdx
+ movq pt_regs_r8(%rax), %r8
+ movq pt_regs_r9(%rax), %r9
+ movq pt_regs_r10(%rax), %r10
+ movq pt_regs_r11(%rax), %r11
+ movq pt_regs_r12(%rax), %r12
+ movq pt_regs_r13(%rax), %r13
+ movq pt_regs_r14(%rax), %r14
+ movq pt_regs_r15(%rax), %r15
+
+ xorl %eax, %eax
+ addq $8, %rsp
+ jmp restore_processor_state
+ENDPROC(do_suspend_lowlevel)
+
+.data
+ENTRY(saved_rbp) .quad 0
+ENTRY(saved_rsi) .quad 0
+ENTRY(saved_rdi) .quad 0
+ENTRY(saved_rbx) .quad 0
+
+ENTRY(saved_rip) .quad 0
+ENTRY(saved_rsp) .quad 0
+
+ENTRY(saved_magic) .quad 0