diff options
Diffstat (limited to 'arch/x86/kernel/early-quirks.c')
| -rw-r--r-- | arch/x86/kernel/early-quirks.c | 105 |
1 files changed, 92 insertions, 13 deletions
diff --git a/arch/x86/kernel/early-quirks.c b/arch/x86/kernel/early-quirks.c index bca14c899..57b71373b 100644 --- a/arch/x86/kernel/early-quirks.c +++ b/arch/x86/kernel/early-quirks.c @@ -11,7 +11,11 @@ #include <linux/pci.h> #include <linux/acpi.h> +#include <linux/delay.h> +#include <linux/dmi.h> #include <linux/pci_ids.h> +#include <linux/bcma/bcma.h> +#include <linux/bcma/bcma_regs.h> #include <drm/i915_drm.h> #include <asm/pci-direct.h> #include <asm/dma.h> @@ -21,6 +25,9 @@ #include <asm/iommu.h> #include <asm/gart.h> #include <asm/irq_remapping.h> +#include <asm/early_ioremap.h> + +#define dev_err(msg) pr_err("pci 0000:%02x:%02x.%d: %s", bus, slot, func, msg) static void __init fix_hypertransport_config(int num, int slot, int func) { @@ -76,6 +83,13 @@ static void __init nvidia_bugs(int num, int slot, int func) #ifdef CONFIG_ACPI #ifdef CONFIG_X86_IO_APIC /* + * Only applies to Nvidia root ports (bus 0) and not to + * Nvidia graphics cards with PCI ports on secondary buses. + */ + if (num) + return; + + /* * All timer overrides on Nvidia are * wrong unless HPET is enabled. * Unfortunately that's not true on many Asus boards. @@ -590,6 +604,61 @@ static void __init force_disable_hpet(int num, int slot, int func) #endif } +#define BCM4331_MMIO_SIZE 16384 +#define BCM4331_PM_CAP 0x40 +#define bcma_aread32(reg) ioread32(mmio + 1 * BCMA_CORE_SIZE + reg) +#define bcma_awrite32(reg, val) iowrite32(val, mmio + 1 * BCMA_CORE_SIZE + reg) + +static void __init apple_airport_reset(int bus, int slot, int func) +{ + void __iomem *mmio; + u16 pmcsr; + u64 addr; + int i; + + if (!dmi_match(DMI_SYS_VENDOR, "Apple Inc.")) + return; + + /* Card may have been put into PCI_D3hot by grub quirk */ + pmcsr = read_pci_config_16(bus, slot, func, BCM4331_PM_CAP + PCI_PM_CTRL); + + if ((pmcsr & PCI_PM_CTRL_STATE_MASK) != PCI_D0) { + pmcsr &= ~PCI_PM_CTRL_STATE_MASK; + write_pci_config_16(bus, slot, func, BCM4331_PM_CAP + PCI_PM_CTRL, pmcsr); + mdelay(10); + + pmcsr = read_pci_config_16(bus, slot, func, BCM4331_PM_CAP + PCI_PM_CTRL); + if ((pmcsr & PCI_PM_CTRL_STATE_MASK) != PCI_D0) { + dev_err("Cannot power up Apple AirPort card\n"); + return; + } + } + + addr = read_pci_config(bus, slot, func, PCI_BASE_ADDRESS_0); + addr |= (u64)read_pci_config(bus, slot, func, PCI_BASE_ADDRESS_1) << 32; + addr &= PCI_BASE_ADDRESS_MEM_MASK; + + mmio = early_ioremap(addr, BCM4331_MMIO_SIZE); + if (!mmio) { + dev_err("Cannot iomap Apple AirPort card\n"); + return; + } + + pr_info("Resetting Apple AirPort card (left enabled by EFI)\n"); + + for (i = 0; bcma_aread32(BCMA_RESET_ST) && i < 30; i++) + udelay(10); + + bcma_awrite32(BCMA_RESET_CTL, BCMA_RESET_CTL_RESET); + bcma_aread32(BCMA_RESET_CTL); + udelay(1); + + bcma_awrite32(BCMA_RESET_CTL, 0); + bcma_aread32(BCMA_RESET_CTL); + udelay(10); + + early_iounmap(mmio, BCM4331_MMIO_SIZE); +} #define QFLAG_APPLY_ONCE 0x1 #define QFLAG_APPLIED 0x2 @@ -603,12 +672,6 @@ struct chipset { void (*f)(int num, int slot, int func); }; -/* - * Only works for devices on the root bus. If you add any devices - * not on bus 0 readd another loop level in early_quirks(). But - * be careful because at least the Nvidia quirk here relies on - * only matching on bus 0. - */ static struct chipset early_qrk[] __initdata = { { PCI_VENDOR_ID_NVIDIA, PCI_ANY_ID, PCI_CLASS_BRIDGE_PCI, PCI_ANY_ID, QFLAG_APPLY_ONCE, nvidia_bugs }, @@ -638,9 +701,13 @@ static struct chipset early_qrk[] __initdata = { */ { PCI_VENDOR_ID_INTEL, 0x0f00, PCI_CLASS_BRIDGE_HOST, PCI_ANY_ID, 0, force_disable_hpet}, + { PCI_VENDOR_ID_BROADCOM, 0x4331, + PCI_CLASS_NETWORK_OTHER, PCI_ANY_ID, 0, apple_airport_reset}, {} }; +static void __init early_pci_scan_bus(int bus); + /** * check_dev_quirk - apply early quirks to a given PCI device * @num: bus number @@ -649,7 +716,7 @@ static struct chipset early_qrk[] __initdata = { * * Check the vendor & device ID against the early quirks table. * - * If the device is single function, let early_quirks() know so we don't + * If the device is single function, let early_pci_scan_bus() know so we don't * poke at this device again. */ static int __init check_dev_quirk(int num, int slot, int func) @@ -658,6 +725,7 @@ static int __init check_dev_quirk(int num, int slot, int func) u16 vendor; u16 device; u8 type; + u8 sec; int i; class = read_pci_config_16(num, slot, func, PCI_CLASS_DEVICE); @@ -685,25 +753,36 @@ static int __init check_dev_quirk(int num, int slot, int func) type = read_pci_config_byte(num, slot, func, PCI_HEADER_TYPE); + + if ((type & 0x7f) == PCI_HEADER_TYPE_BRIDGE) { + sec = read_pci_config_byte(num, slot, func, PCI_SECONDARY_BUS); + if (sec > num) + early_pci_scan_bus(sec); + } + if (!(type & 0x80)) return -1; return 0; } -void __init early_quirks(void) +static void __init early_pci_scan_bus(int bus) { int slot, func; - if (!early_pci_allowed()) - return; - /* Poor man's PCI discovery */ - /* Only scan the root bus */ for (slot = 0; slot < 32; slot++) for (func = 0; func < 8; func++) { /* Only probe function 0 on single fn devices */ - if (check_dev_quirk(0, slot, func)) + if (check_dev_quirk(bus, slot, func)) break; } } + +void __init early_quirks(void) +{ + if (!early_pci_allowed()) + return; + + early_pci_scan_bus(0); +} |