diff options
Diffstat (limited to 'arch/x86/kernel/quirks.c')
| -rw-r--r-- | arch/x86/kernel/quirks.c | 628 |
1 files changed, 628 insertions, 0 deletions
diff --git a/arch/x86/kernel/quirks.c b/arch/x86/kernel/quirks.c new file mode 100644 index 000000000..176a0f99d --- /dev/null +++ b/arch/x86/kernel/quirks.c @@ -0,0 +1,628 @@ +/* + * This file contains work-arounds for x86 and x86_64 platform bugs. + */ +#include <linux/pci.h> +#include <linux/irq.h> + +#include <asm/hpet.h> + +#if defined(CONFIG_X86_IO_APIC) && defined(CONFIG_SMP) && defined(CONFIG_PCI) + +static void quirk_intel_irqbalance(struct pci_dev *dev) +{ + u8 config; + u16 word; + + /* BIOS may enable hardware IRQ balancing for + * E7520/E7320/E7525(revision ID 0x9 and below) + * based platforms. + * Disable SW irqbalance/affinity on those platforms. + */ + if (dev->revision > 0x9) + return; + + /* enable access to config space*/ + pci_read_config_byte(dev, 0xf4, &config); + pci_write_config_byte(dev, 0xf4, config|0x2); + + /* + * read xTPR register. We may not have a pci_dev for device 8 + * because it might be hidden until the above write. + */ + pci_bus_read_config_word(dev->bus, PCI_DEVFN(8, 0), 0x4c, &word); + + if (!(word & (1 << 13))) { + dev_info(&dev->dev, "Intel E7520/7320/7525 detected; " + "disabling irq balancing and affinity\n"); + noirqdebug_setup(""); +#ifdef CONFIG_PROC_FS + no_irq_affinity = 1; +#endif + } + + /* put back the original value for config space*/ + if (!(config & 0x2)) + pci_write_config_byte(dev, 0xf4, config); +} +DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_E7320_MCH, + quirk_intel_irqbalance); +DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_E7525_MCH, + quirk_intel_irqbalance); +DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_E7520_MCH, + quirk_intel_irqbalance); +#endif + +#if defined(CONFIG_HPET_TIMER) +unsigned long force_hpet_address; + +static enum { + NONE_FORCE_HPET_RESUME, + OLD_ICH_FORCE_HPET_RESUME, + ICH_FORCE_HPET_RESUME, + VT8237_FORCE_HPET_RESUME, + NVIDIA_FORCE_HPET_RESUME, + ATI_FORCE_HPET_RESUME, +} force_hpet_resume_type; + +static void __iomem *rcba_base; + +static void ich_force_hpet_resume(void) +{ + u32 val; + + if (!force_hpet_address) + return; + + BUG_ON(rcba_base == NULL); + + /* read the Function Disable register, dword mode only */ + val = readl(rcba_base + 0x3404); + if (!(val & 0x80)) { + /* HPET disabled in HPTC. Trying to enable */ + writel(val | 0x80, rcba_base + 0x3404); + } + + val = readl(rcba_base + 0x3404); + if (!(val & 0x80)) + BUG(); + else + printk(KERN_DEBUG "Force enabled HPET at resume\n"); + + return; +} + +static void ich_force_enable_hpet(struct pci_dev *dev) +{ + u32 val; + u32 uninitialized_var(rcba); + int err = 0; + + if (hpet_address || force_hpet_address) + return; + + pci_read_config_dword(dev, 0xF0, &rcba); + rcba &= 0xFFFFC000; + if (rcba == 0) { + dev_printk(KERN_DEBUG, &dev->dev, "RCBA disabled; " + "cannot force enable HPET\n"); + return; + } + + /* use bits 31:14, 16 kB aligned */ + rcba_base = ioremap_nocache(rcba, 0x4000); + if (rcba_base == NULL) { + dev_printk(KERN_DEBUG, &dev->dev, "ioremap failed; " + "cannot force enable HPET\n"); + return; + } + + /* read the Function Disable register, dword mode only */ + val = readl(rcba_base + 0x3404); + + if (val & 0x80) { + /* HPET is enabled in HPTC. Just not reported by BIOS */ + val = val & 0x3; + force_hpet_address = 0xFED00000 | (val << 12); + dev_printk(KERN_DEBUG, &dev->dev, "Force enabled HPET at " + "0x%lx\n", force_hpet_address); + iounmap(rcba_base); + return; + } + + /* HPET disabled in HPTC. Trying to enable */ + writel(val | 0x80, rcba_base + 0x3404); + + val = readl(rcba_base + 0x3404); + if (!(val & 0x80)) { + err = 1; + } else { + val = val & 0x3; + force_hpet_address = 0xFED00000 | (val << 12); + } + + if (err) { + force_hpet_address = 0; + iounmap(rcba_base); + dev_printk(KERN_DEBUG, &dev->dev, + "Failed to force enable HPET\n"); + } else { + force_hpet_resume_type = ICH_FORCE_HPET_RESUME; + dev_printk(KERN_DEBUG, &dev->dev, "Force enabled HPET at " + "0x%lx\n", force_hpet_address); + } +} + +DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ESB2_0, + ich_force_enable_hpet); +DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH6_0, + ich_force_enable_hpet); +DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH6_1, + ich_force_enable_hpet); +DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH7_0, + ich_force_enable_hpet); +DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH7_1, + ich_force_enable_hpet); +DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH7_31, + ich_force_enable_hpet); +DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH8_1, + ich_force_enable_hpet); +DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH8_4, + ich_force_enable_hpet); +DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH9_7, + ich_force_enable_hpet); +DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x3a16, /* ICH10 */ + ich_force_enable_hpet); + +static struct pci_dev *cached_dev; + +static void hpet_print_force_info(void) +{ + printk(KERN_INFO "HPET not enabled in BIOS. " + "You might try hpet=force boot option\n"); +} + +static void old_ich_force_hpet_resume(void) +{ + u32 val; + u32 uninitialized_var(gen_cntl); + + if (!force_hpet_address || !cached_dev) + return; + + pci_read_config_dword(cached_dev, 0xD0, &gen_cntl); + gen_cntl &= (~(0x7 << 15)); + gen_cntl |= (0x4 << 15); + + pci_write_config_dword(cached_dev, 0xD0, gen_cntl); + pci_read_config_dword(cached_dev, 0xD0, &gen_cntl); + val = gen_cntl >> 15; + val &= 0x7; + if (val == 0x4) + printk(KERN_DEBUG "Force enabled HPET at resume\n"); + else + BUG(); +} + +static void old_ich_force_enable_hpet(struct pci_dev *dev) +{ + u32 val; + u32 uninitialized_var(gen_cntl); + + if (hpet_address || force_hpet_address) + return; + + pci_read_config_dword(dev, 0xD0, &gen_cntl); + /* + * Bit 17 is HPET enable bit. + * Bit 16:15 control the HPET base address. + */ + val = gen_cntl >> 15; + val &= 0x7; + if (val & 0x4) { + val &= 0x3; + force_hpet_address = 0xFED00000 | (val << 12); + dev_printk(KERN_DEBUG, &dev->dev, "HPET at 0x%lx\n", + force_hpet_address); + return; + } + + /* + * HPET is disabled. Trying enabling at FED00000 and check + * whether it sticks + */ + gen_cntl &= (~(0x7 << 15)); + gen_cntl |= (0x4 << 15); + pci_write_config_dword(dev, 0xD0, gen_cntl); + + pci_read_config_dword(dev, 0xD0, &gen_cntl); + + val = gen_cntl >> 15; + val &= 0x7; + if (val & 0x4) { + /* HPET is enabled in HPTC. Just not reported by BIOS */ + val &= 0x3; + force_hpet_address = 0xFED00000 | (val << 12); + dev_printk(KERN_DEBUG, &dev->dev, "Force enabled HPET at " + "0x%lx\n", force_hpet_address); + cached_dev = dev; + force_hpet_resume_type = OLD_ICH_FORCE_HPET_RESUME; + return; + } + + dev_printk(KERN_DEBUG, &dev->dev, "Failed to force enable HPET\n"); +} + +/* + * Undocumented chipset features. Make sure that the user enforced + * this. + */ +static void old_ich_force_enable_hpet_user(struct pci_dev *dev) +{ + if (hpet_force_user) + old_ich_force_enable_hpet(dev); +} + +DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ESB_1, + old_ich_force_enable_hpet_user); +DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801CA_0, + old_ich_force_enable_hpet_user); +DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801CA_12, + old_ich_force_enable_hpet_user); +DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801DB_0, + old_ich_force_enable_hpet_user); +DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801DB_12, + old_ich_force_enable_hpet_user); +DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801EB_0, + old_ich_force_enable_hpet); +DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801EB_12, + old_ich_force_enable_hpet); + + +static void vt8237_force_hpet_resume(void) +{ + u32 val; + + if (!force_hpet_address || !cached_dev) + return; + + val = 0xfed00000 | 0x80; + pci_write_config_dword(cached_dev, 0x68, val); + + pci_read_config_dword(cached_dev, 0x68, &val); + if (val & 0x80) + printk(KERN_DEBUG "Force enabled HPET at resume\n"); + else + BUG(); +} + +static void vt8237_force_enable_hpet(struct pci_dev *dev) +{ + u32 uninitialized_var(val); + + if (hpet_address || force_hpet_address) + return; + + if (!hpet_force_user) { + hpet_print_force_info(); + return; + } + + pci_read_config_dword(dev, 0x68, &val); + /* + * Bit 7 is HPET enable bit. + * Bit 31:10 is HPET base address (contrary to what datasheet claims) + */ + if (val & 0x80) { + force_hpet_address = (val & ~0x3ff); + dev_printk(KERN_DEBUG, &dev->dev, "HPET at 0x%lx\n", + force_hpet_address); + return; + } + + /* + * HPET is disabled. Trying enabling at FED00000 and check + * whether it sticks + */ + val = 0xfed00000 | 0x80; + pci_write_config_dword(dev, 0x68, val); + + pci_read_config_dword(dev, 0x68, &val); + if (val & 0x80) { + force_hpet_address = (val & ~0x3ff); + dev_printk(KERN_DEBUG, &dev->dev, "Force enabled HPET at " + "0x%lx\n", force_hpet_address); + cached_dev = dev; + force_hpet_resume_type = VT8237_FORCE_HPET_RESUME; + return; + } + + dev_printk(KERN_DEBUG, &dev->dev, "Failed to force enable HPET\n"); +} + +DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8235, + vt8237_force_enable_hpet); +DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8237, + vt8237_force_enable_hpet); +DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_CX700, + vt8237_force_enable_hpet); + +static void ati_force_hpet_resume(void) +{ + pci_write_config_dword(cached_dev, 0x14, 0xfed00000); + printk(KERN_DEBUG "Force enabled HPET at resume\n"); +} + +static u32 ati_ixp4x0_rev(struct pci_dev *dev) +{ + int err = 0; + u32 d = 0; + u8 b = 0; + + err = pci_read_config_byte(dev, 0xac, &b); + b &= ~(1<<5); + err |= pci_write_config_byte(dev, 0xac, b); + err |= pci_read_config_dword(dev, 0x70, &d); + d |= 1<<8; + err |= pci_write_config_dword(dev, 0x70, d); + err |= pci_read_config_dword(dev, 0x8, &d); + d &= 0xff; + dev_printk(KERN_DEBUG, &dev->dev, "SB4X0 revision 0x%x\n", d); + + WARN_ON_ONCE(err); + + return d; +} + +static void ati_force_enable_hpet(struct pci_dev *dev) +{ + u32 d, val; + u8 b; + + if (hpet_address || force_hpet_address) + return; + + if (!hpet_force_user) { + hpet_print_force_info(); + return; + } + + d = ati_ixp4x0_rev(dev); + if (d < 0x82) + return; + + /* base address */ + pci_write_config_dword(dev, 0x14, 0xfed00000); + pci_read_config_dword(dev, 0x14, &val); + + /* enable interrupt */ + outb(0x72, 0xcd6); b = inb(0xcd7); + b |= 0x1; + outb(0x72, 0xcd6); outb(b, 0xcd7); + outb(0x72, 0xcd6); b = inb(0xcd7); + if (!(b & 0x1)) + return; + pci_read_config_dword(dev, 0x64, &d); + d |= (1<<10); + pci_write_config_dword(dev, 0x64, d); + pci_read_config_dword(dev, 0x64, &d); + if (!(d & (1<<10))) + return; + + force_hpet_address = val; + force_hpet_resume_type = ATI_FORCE_HPET_RESUME; + dev_printk(KERN_DEBUG, &dev->dev, "Force enabled HPET at 0x%lx\n", + force_hpet_address); + cached_dev = dev; +} +DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_IXP400_SMBUS, + ati_force_enable_hpet); + +/* + * Undocumented chipset feature taken from LinuxBIOS. + */ +static void nvidia_force_hpet_resume(void) +{ + pci_write_config_dword(cached_dev, 0x44, 0xfed00001); + printk(KERN_DEBUG "Force enabled HPET at resume\n"); +} + +static void nvidia_force_enable_hpet(struct pci_dev *dev) +{ + u32 uninitialized_var(val); + + if (hpet_address || force_hpet_address) + return; + + if (!hpet_force_user) { + hpet_print_force_info(); + return; + } + + pci_write_config_dword(dev, 0x44, 0xfed00001); + pci_read_config_dword(dev, 0x44, &val); + force_hpet_address = val & 0xfffffffe; + force_hpet_resume_type = NVIDIA_FORCE_HPET_RESUME; + dev_printk(KERN_DEBUG, &dev->dev, "Force enabled HPET at 0x%lx\n", + force_hpet_address); + cached_dev = dev; + return; +} + +/* ISA Bridges */ +DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_NVIDIA, 0x0050, + nvidia_force_enable_hpet); +DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_NVIDIA, 0x0051, + nvidia_force_enable_hpet); + +/* LPC bridges */ +DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_NVIDIA, 0x0260, + nvidia_force_enable_hpet); +DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_NVIDIA, 0x0360, + nvidia_force_enable_hpet); +DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_NVIDIA, 0x0361, + nvidia_force_enable_hpet); +DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_NVIDIA, 0x0362, + nvidia_force_enable_hpet); +DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_NVIDIA, 0x0363, + nvidia_force_enable_hpet); +DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_NVIDIA, 0x0364, + nvidia_force_enable_hpet); +DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_NVIDIA, 0x0365, + nvidia_force_enable_hpet); +DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_NVIDIA, 0x0366, + nvidia_force_enable_hpet); +DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_NVIDIA, 0x0367, + nvidia_force_enable_hpet); + +void force_hpet_resume(void) +{ + switch (force_hpet_resume_type) { + case ICH_FORCE_HPET_RESUME: + ich_force_hpet_resume(); + return; + case OLD_ICH_FORCE_HPET_RESUME: + old_ich_force_hpet_resume(); + return; + case VT8237_FORCE_HPET_RESUME: + vt8237_force_hpet_resume(); + return; + case NVIDIA_FORCE_HPET_RESUME: + nvidia_force_hpet_resume(); + return; + case ATI_FORCE_HPET_RESUME: + ati_force_hpet_resume(); + return; + default: + break; + } +} + +/* + * According to the datasheet e6xx systems have the HPET hardwired to + * 0xfed00000 + */ +static void e6xx_force_enable_hpet(struct pci_dev *dev) +{ + if (hpet_address || force_hpet_address) + return; + + force_hpet_address = 0xFED00000; + force_hpet_resume_type = NONE_FORCE_HPET_RESUME; + dev_printk(KERN_DEBUG, &dev->dev, "Force enabled HPET at " + "0x%lx\n", force_hpet_address); + return; +} +DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_E6XX_CU, + e6xx_force_enable_hpet); + +/* + * HPET MSI on some boards (ATI SB700/SB800) has side effect on + * floppy DMA. Disable HPET MSI on such platforms. + * See erratum #27 (Misinterpreted MSI Requests May Result in + * Corrupted LPC DMA Data) in AMD Publication #46837, + * "SB700 Family Product Errata", Rev. 1.0, March 2010. + */ +static void force_disable_hpet_msi(struct pci_dev *unused) +{ + hpet_msi_disable = 1; +} + +DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_SBX00_SMBUS, + force_disable_hpet_msi); + +#endif + +#if defined(CONFIG_PCI) && defined(CONFIG_NUMA) +/* Set correct numa_node information for AMD NB functions */ +static void quirk_amd_nb_node(struct pci_dev *dev) +{ + struct pci_dev *nb_ht; + unsigned int devfn; + u32 node; + u32 val; + + devfn = PCI_DEVFN(PCI_SLOT(dev->devfn), 0); + nb_ht = pci_get_slot(dev->bus, devfn); + if (!nb_ht) + return; + + pci_read_config_dword(nb_ht, 0x60, &val); + node = pcibus_to_node(dev->bus) | (val & 7); + /* + * Some hardware may return an invalid node ID, + * so check it first: + */ + if (node_online(node)) + set_dev_node(&dev->dev, node); + pci_dev_put(nb_ht); +} + +DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_K8_NB, + quirk_amd_nb_node); +DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_K8_NB_ADDRMAP, + quirk_amd_nb_node); +DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_K8_NB_MEMCTL, + quirk_amd_nb_node); +DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_K8_NB_MISC, + quirk_amd_nb_node); +DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_10H_NB_HT, + quirk_amd_nb_node); +DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_10H_NB_MAP, + quirk_amd_nb_node); +DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_10H_NB_DRAM, + quirk_amd_nb_node); +DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_10H_NB_MISC, + quirk_amd_nb_node); +DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_10H_NB_LINK, + quirk_amd_nb_node); +DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_15H_NB_F0, + quirk_amd_nb_node); +DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_15H_NB_F1, + quirk_amd_nb_node); +DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_15H_NB_F2, + quirk_amd_nb_node); +DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_15H_NB_F3, + quirk_amd_nb_node); +DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_15H_NB_F4, + quirk_amd_nb_node); +DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_15H_NB_F5, + quirk_amd_nb_node); + +#endif + +#ifdef CONFIG_PCI +/* + * Processor does not ensure DRAM scrub read/write sequence + * is atomic wrt accesses to CC6 save state area. Therefore + * if a concurrent scrub read/write access is to same address + * the entry may appear as if it is not written. This quirk + * applies to Fam16h models 00h-0Fh + * + * See "Revision Guide" for AMD F16h models 00h-0fh, + * document 51810 rev. 3.04, Nov 2013 + */ +static void amd_disable_seq_and_redirect_scrub(struct pci_dev *dev) +{ + u32 val; + + /* + * Suggested workaround: + * set D18F3x58[4:0] = 00h and set D18F3x5C[0] = 0b + */ + pci_read_config_dword(dev, 0x58, &val); + if (val & 0x1F) { + val &= ~(0x1F); + pci_write_config_dword(dev, 0x58, val); + } + + pci_read_config_dword(dev, 0x5C, &val); + if (val & BIT(0)) { + val &= ~BIT(0); + pci_write_config_dword(dev, 0x5c, val); + } +} + +DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_16H_NB_F3, + amd_disable_seq_and_redirect_scrub); + +#endif |