summaryrefslogtreecommitdiff
path: root/arch/x86/lguest/boot.c
diff options
context:
space:
mode:
Diffstat (limited to 'arch/x86/lguest/boot.c')
-rw-r--r--arch/x86/lguest/boot.c91
1 files changed, 43 insertions, 48 deletions
diff --git a/arch/x86/lguest/boot.c b/arch/x86/lguest/boot.c
index f2dc08c00..a0d09f6c6 100644
--- a/arch/x86/lguest/boot.c
+++ b/arch/x86/lguest/boot.c
@@ -835,16 +835,46 @@ static struct irq_chip lguest_irq_controller = {
.irq_unmask = enable_lguest_irq,
};
+/*
+ * Interrupt descriptors are allocated as-needed, but low-numbered ones are
+ * reserved by the generic x86 code. So we ignore irq_alloc_desc_at if it
+ * tells us the irq is already used: other errors (ie. ENOMEM) we take
+ * seriously.
+ */
+static int lguest_setup_irq(unsigned int irq)
+{
+ struct irq_desc *desc;
+ int err;
+
+ /* Returns -ve error or vector number. */
+ err = irq_alloc_desc_at(irq, 0);
+ if (err < 0 && err != -EEXIST)
+ return err;
+
+ /*
+ * Tell the Linux infrastructure that the interrupt is
+ * controlled by our level-based lguest interrupt controller.
+ */
+ irq_set_chip_and_handler_name(irq, &lguest_irq_controller,
+ handle_level_irq, "level");
+
+ /* Some systems map "vectors" to interrupts weirdly. Not us! */
+ desc = irq_to_desc(irq);
+ __this_cpu_write(vector_irq[FIRST_EXTERNAL_VECTOR + irq], desc);
+ return 0;
+}
+
static int lguest_enable_irq(struct pci_dev *dev)
{
+ int err;
u8 line = 0;
/* We literally use the PCI interrupt line as the irq number. */
pci_read_config_byte(dev, PCI_INTERRUPT_LINE, &line);
- irq_set_chip_and_handler_name(line, &lguest_irq_controller,
- handle_level_irq, "level");
- dev->irq = line;
- return 0;
+ err = lguest_setup_irq(line);
+ if (!err)
+ dev->irq = line;
+ return err;
}
/* We don't do hotplug PCI, so this shouldn't be called. */
@@ -855,17 +885,13 @@ static void lguest_disable_irq(struct pci_dev *dev)
/*
* This sets up the Interrupt Descriptor Table (IDT) entry for each hardware
- * interrupt (except 128, which is used for system calls), and then tells the
- * Linux infrastructure that each interrupt is controlled by our level-based
- * lguest interrupt controller.
+ * interrupt (except 128, which is used for system calls).
*/
static void __init lguest_init_IRQ(void)
{
unsigned int i;
for (i = FIRST_EXTERNAL_VECTOR; i < FIRST_SYSTEM_VECTOR; i++) {
- /* Some systems map "vectors" to interrupts weirdly. Not us! */
- __this_cpu_write(vector_irq[i], i - FIRST_EXTERNAL_VECTOR);
if (i != IA32_SYSCALL_VECTOR)
set_intr_gate(i, irq_entries_start +
8 * (i - FIRST_EXTERNAL_VECTOR));
@@ -879,26 +905,6 @@ static void __init lguest_init_IRQ(void)
}
/*
- * Interrupt descriptors are allocated as-needed, but low-numbered ones are
- * reserved by the generic x86 code. So we ignore irq_alloc_desc_at if it
- * tells us the irq is already used: other errors (ie. ENOMEM) we take
- * seriously.
- */
-int lguest_setup_irq(unsigned int irq)
-{
- int err;
-
- /* Returns -ve error or vector number. */
- err = irq_alloc_desc_at(irq, 0);
- if (err < 0 && err != -EEXIST)
- return err;
-
- irq_set_chip_and_handler_name(irq, &lguest_irq_controller,
- handle_level_irq, "level");
- return 0;
-}
-
-/*
* Time.
*
* It would be far better for everyone if the Guest had its own clock, but
@@ -985,23 +991,11 @@ static int lguest_clockevent_set_next_event(unsigned long delta,
return 0;
}
-static void lguest_clockevent_set_mode(enum clock_event_mode mode,
- struct clock_event_device *evt)
+static int lguest_clockevent_shutdown(struct clock_event_device *evt)
{
- switch (mode) {
- case CLOCK_EVT_MODE_UNUSED:
- case CLOCK_EVT_MODE_SHUTDOWN:
- /* A 0 argument shuts the clock down. */
- hcall(LHCALL_SET_CLOCKEVENT, 0, 0, 0, 0);
- break;
- case CLOCK_EVT_MODE_ONESHOT:
- /* This is what we expect. */
- break;
- case CLOCK_EVT_MODE_PERIODIC:
- BUG();
- case CLOCK_EVT_MODE_RESUME:
- break;
- }
+ /* A 0 argument shuts the clock down. */
+ hcall(LHCALL_SET_CLOCKEVENT, 0, 0, 0, 0);
+ return 0;
}
/* This describes our primitive timer chip. */
@@ -1009,7 +1003,7 @@ static struct clock_event_device lguest_clockevent = {
.name = "lguest",
.features = CLOCK_EVT_FEAT_ONESHOT,
.set_next_event = lguest_clockevent_set_next_event,
- .set_mode = lguest_clockevent_set_mode,
+ .set_state_shutdown = lguest_clockevent_shutdown,
.rating = INT_MAX,
.mult = 1,
.shift = 0,
@@ -1021,7 +1015,7 @@ static struct clock_event_device lguest_clockevent = {
* This is the Guest timer interrupt handler (hardware interrupt 0). We just
* call the clockevent infrastructure and it does whatever needs doing.
*/
-static void lguest_time_irq(unsigned int irq, struct irq_desc *desc)
+static void lguest_time_irq(struct irq_desc *desc)
{
unsigned long flags;
@@ -1040,7 +1034,8 @@ static void lguest_time_irq(unsigned int irq, struct irq_desc *desc)
static void lguest_time_init(void)
{
/* Set up the timer interrupt (0) to go to our simple timer routine */
- lguest_setup_irq(0);
+ if (lguest_setup_irq(0) != 0)
+ panic("Could not set up timer irq");
irq_set_handler(0, lguest_time_irq);
clocksource_register_hz(&lguest_clock, NSEC_PER_SEC);