1 files changed, 43 insertions, 48 deletions

diff --git a/arch/x86/lguest/boot.c b/arch/x86/lguest/boot.c
index f2dc08c00..a0d09f6c6 100644
--- a/arch/x86/lguest/boot.c
+++ b/arch/x86/lguest/boot.c
@@ -835,16 +835,46 @@ static struct irq_chip lguest_irq_controller = {
 	.irq_unmask	= enable_lguest_irq,
 };
 
+/*
+ * Interrupt descriptors are allocated as-needed, but low-numbered ones are
+ * reserved by the generic x86 code.  So we ignore irq_alloc_desc_at if it
+ * tells us the irq is already used: other errors (ie. ENOMEM) we take
+ * seriously.
+ */
+static int lguest_setup_irq(unsigned int irq)
+{
+	struct irq_desc *desc;
+	int err;
+
+	/* Returns -ve error or vector number. */
+	err = irq_alloc_desc_at(irq, 0);
+	if (err < 0 && err != -EEXIST)
+		return err;
+
+	/*
+	 * Tell the Linux infrastructure that the interrupt is
+	 * controlled by our level-based lguest interrupt controller.
+	 */
+	irq_set_chip_and_handler_name(irq, &lguest_irq_controller,
+				      handle_level_irq, "level");
+
+	/* Some systems map "vectors" to interrupts weirdly.  Not us! */
+	desc = irq_to_desc(irq);
+	__this_cpu_write(vector_irq[FIRST_EXTERNAL_VECTOR + irq], desc);
+	return 0;
+}
+
 static int lguest_enable_irq(struct pci_dev *dev)
 {
+	int err;
 	u8 line = 0;
 
 	/* We literally use the PCI interrupt line as the irq number. */
 	pci_read_config_byte(dev, PCI_INTERRUPT_LINE, &line);
-	irq_set_chip_and_handler_name(line, &lguest_irq_controller,
-				      handle_level_irq, "level");
-	dev->irq = line;
-	return 0;
+	err = lguest_setup_irq(line);
+	if (!err)
+		dev->irq = line;
+	return err;
 }
 
 /* We don't do hotplug PCI, so this shouldn't be called. */
@@ -855,17 +885,13 @@ static void lguest_disable_irq(struct pci_dev *dev)
 
 /*
  * This sets up the Interrupt Descriptor Table (IDT) entry for each hardware
- * interrupt (except 128, which is used for system calls), and then tells the
- * Linux infrastructure that each interrupt is controlled by our level-based
- * lguest interrupt controller.
+ * interrupt (except 128, which is used for system calls).
  */
 static void __init lguest_init_IRQ(void)
 {
 	unsigned int i;
 
 	for (i = FIRST_EXTERNAL_VECTOR; i < FIRST_SYSTEM_VECTOR; i++) {
-		/* Some systems map "vectors" to interrupts weirdly.  Not us! */
-		__this_cpu_write(vector_irq[i], i - FIRST_EXTERNAL_VECTOR);
 		if (i != IA32_SYSCALL_VECTOR)
 			set_intr_gate(i, irq_entries_start +
 					8 * (i - FIRST_EXTERNAL_VECTOR));
@@ -879,26 +905,6 @@ static void __init lguest_init_IRQ(void)
 }
 
 /*
- * Interrupt descriptors are allocated as-needed, but low-numbered ones are
- * reserved by the generic x86 code.  So we ignore irq_alloc_desc_at if it
- * tells us the irq is already used: other errors (ie. ENOMEM) we take
- * seriously.
- */
-int lguest_setup_irq(unsigned int irq)
-{
-	int err;
-
-	/* Returns -ve error or vector number. */
-	err = irq_alloc_desc_at(irq, 0);
-	if (err < 0 && err != -EEXIST)
-		return err;
-
-	irq_set_chip_and_handler_name(irq, &lguest_irq_controller,
-				      handle_level_irq, "level");
-	return 0;
-}
-
-/*
  * Time.
  *
  * It would be far better for everyone if the Guest had its own clock, but
@@ -985,23 +991,11 @@ static int lguest_clockevent_set_next_event(unsigned long delta,
 	return 0;
 }
 
-static void lguest_clockevent_set_mode(enum clock_event_mode mode,
-                                      struct clock_event_device *evt)
+static int lguest_clockevent_shutdown(struct clock_event_device *evt)
 {
-	switch (mode) {
-	case CLOCK_EVT_MODE_UNUSED:
-	case CLOCK_EVT_MODE_SHUTDOWN:
-		/* A 0 argument shuts the clock down. */
-		hcall(LHCALL_SET_CLOCKEVENT, 0, 0, 0, 0);
-		break;
-	case CLOCK_EVT_MODE_ONESHOT:
-		/* This is what we expect. */
-		break;
-	case CLOCK_EVT_MODE_PERIODIC:
-		BUG();
-	case CLOCK_EVT_MODE_RESUME:
-		break;
-	}
+	/* A 0 argument shuts the clock down. */
+	hcall(LHCALL_SET_CLOCKEVENT, 0, 0, 0, 0);
+	return 0;
 }
 
 /* This describes our primitive timer chip. */
@@ -1009,7 +1003,7 @@ static struct clock_event_device lguest_clockevent = {
 	.name                   = "lguest",
 	.features               = CLOCK_EVT_FEAT_ONESHOT,
 	.set_next_event         = lguest_clockevent_set_next_event,
-	.set_mode               = lguest_clockevent_set_mode,
+	.set_state_shutdown	= lguest_clockevent_shutdown,
 	.rating                 = INT_MAX,
 	.mult                   = 1,
 	.shift                  = 0,
@@ -1021,7 +1015,7 @@ static struct clock_event_device lguest_clockevent = {
  * This is the Guest timer interrupt handler (hardware interrupt 0).  We just
  * call the clockevent infrastructure and it does whatever needs doing.
  */
-static void lguest_time_irq(unsigned int irq, struct irq_desc *desc)
+static void lguest_time_irq(struct irq_desc *desc)
 {
 	unsigned long flags;
 
@@ -1040,7 +1034,8 @@ static void lguest_time_irq(unsigned int irq, struct irq_desc *desc)
 static void lguest_time_init(void)
 {
 	/* Set up the timer interrupt (0) to go to our simple timer routine */
-	lguest_setup_irq(0);
+	if (lguest_setup_irq(0) != 0)
+		panic("Could not set up timer irq");
 	irq_set_handler(0, lguest_time_irq);
 
 	clocksource_register_hz(&lguest_clock, NSEC_PER_SEC);