diff options
Diffstat (limited to 'arch/x86/mm/srat.c')
| -rw-r--r-- | arch/x86/mm/srat.c | 222 |
1 files changed, 222 insertions, 0 deletions
diff --git a/arch/x86/mm/srat.c b/arch/x86/mm/srat.c new file mode 100644 index 000000000..66338a60a --- /dev/null +++ b/arch/x86/mm/srat.c @@ -0,0 +1,222 @@ +/* + * ACPI 3.0 based NUMA setup + * Copyright 2004 Andi Kleen, SuSE Labs. + * + * Reads the ACPI SRAT table to figure out what memory belongs to which CPUs. + * + * Called from acpi_numa_init while reading the SRAT and SLIT tables. + * Assumes all memory regions belonging to a single proximity domain + * are in one chunk. Holes between them will be included in the node. + */ + +#include <linux/kernel.h> +#include <linux/acpi.h> +#include <linux/mmzone.h> +#include <linux/bitmap.h> +#include <linux/module.h> +#include <linux/topology.h> +#include <linux/bootmem.h> +#include <linux/memblock.h> +#include <linux/mm.h> +#include <asm/proto.h> +#include <asm/numa.h> +#include <asm/e820.h> +#include <asm/apic.h> +#include <asm/uv/uv.h> + +int acpi_numa __initdata; + +static __init int setup_node(int pxm) +{ + return acpi_map_pxm_to_node(pxm); +} + +static __init void bad_srat(void) +{ + printk(KERN_ERR "SRAT: SRAT not used.\n"); + acpi_numa = -1; +} + +static __init inline int srat_disabled(void) +{ + return acpi_numa < 0; +} + +/* + * Callback for SLIT parsing. pxm_to_node() returns NUMA_NO_NODE for + * I/O localities since SRAT does not list them. I/O localities are + * not supported at this point. + */ +void __init acpi_numa_slit_init(struct acpi_table_slit *slit) +{ + int i, j; + + for (i = 0; i < slit->locality_count; i++) { + const int from_node = pxm_to_node(i); + + if (from_node == NUMA_NO_NODE) + continue; + + for (j = 0; j < slit->locality_count; j++) { + const int to_node = pxm_to_node(j); + + if (to_node == NUMA_NO_NODE) + continue; + + numa_set_distance(from_node, to_node, + slit->entry[slit->locality_count * i + j]); + } + } +} + +/* Callback for Proximity Domain -> x2APIC mapping */ +void __init +acpi_numa_x2apic_affinity_init(struct acpi_srat_x2apic_cpu_affinity *pa) +{ + int pxm, node; + int apic_id; + + if (srat_disabled()) + return; + if (pa->header.length < sizeof(struct acpi_srat_x2apic_cpu_affinity)) { + bad_srat(); + return; + } + if ((pa->flags & ACPI_SRAT_CPU_ENABLED) == 0) + return; + pxm = pa->proximity_domain; + apic_id = pa->apic_id; + if (!apic->apic_id_valid(apic_id)) { + printk(KERN_INFO "SRAT: PXM %u -> X2APIC 0x%04x ignored\n", + pxm, apic_id); + return; + } + node = setup_node(pxm); + if (node < 0) { + printk(KERN_ERR "SRAT: Too many proximity domains %x\n", pxm); + bad_srat(); + return; + } + + if (apic_id >= MAX_LOCAL_APIC) { + printk(KERN_INFO "SRAT: PXM %u -> APIC 0x%04x -> Node %u skipped apicid that is too big\n", pxm, apic_id, node); + return; + } + set_apicid_to_node(apic_id, node); + node_set(node, numa_nodes_parsed); + acpi_numa = 1; + printk(KERN_INFO "SRAT: PXM %u -> APIC 0x%04x -> Node %u\n", + pxm, apic_id, node); +} + +/* Callback for Proximity Domain -> LAPIC mapping */ +void __init +acpi_numa_processor_affinity_init(struct acpi_srat_cpu_affinity *pa) +{ + int pxm, node; + int apic_id; + + if (srat_disabled()) + return; + if (pa->header.length != sizeof(struct acpi_srat_cpu_affinity)) { + bad_srat(); + return; + } + if ((pa->flags & ACPI_SRAT_CPU_ENABLED) == 0) + return; + pxm = pa->proximity_domain_lo; + if (acpi_srat_revision >= 2) + pxm |= *((unsigned int*)pa->proximity_domain_hi) << 8; + node = setup_node(pxm); + if (node < 0) { + printk(KERN_ERR "SRAT: Too many proximity domains %x\n", pxm); + bad_srat(); + return; + } + + if (get_uv_system_type() >= UV_X2APIC) + apic_id = (pa->apic_id << 8) | pa->local_sapic_eid; + else + apic_id = pa->apic_id; + + if (apic_id >= MAX_LOCAL_APIC) { + printk(KERN_INFO "SRAT: PXM %u -> APIC 0x%02x -> Node %u skipped apicid that is too big\n", pxm, apic_id, node); + return; + } + + set_apicid_to_node(apic_id, node); + node_set(node, numa_nodes_parsed); + acpi_numa = 1; + printk(KERN_INFO "SRAT: PXM %u -> APIC 0x%02x -> Node %u\n", + pxm, apic_id, node); +} + +#ifdef CONFIG_MEMORY_HOTPLUG +static inline int save_add_info(void) {return 1;} +#else +static inline int save_add_info(void) {return 0;} +#endif + +/* Callback for parsing of the Proximity Domain <-> Memory Area mappings */ +int __init +acpi_numa_memory_affinity_init(struct acpi_srat_mem_affinity *ma) +{ + u64 start, end; + u32 hotpluggable; + int node, pxm; + + if (srat_disabled()) + goto out_err; + if (ma->header.length != sizeof(struct acpi_srat_mem_affinity)) + goto out_err_bad_srat; + if ((ma->flags & ACPI_SRAT_MEM_ENABLED) == 0) + goto out_err; + hotpluggable = ma->flags & ACPI_SRAT_MEM_HOT_PLUGGABLE; + if (hotpluggable && !save_add_info()) + goto out_err; + + start = ma->base_address; + end = start + ma->length; + pxm = ma->proximity_domain; + if (acpi_srat_revision <= 1) + pxm &= 0xff; + + node = setup_node(pxm); + if (node < 0) { + printk(KERN_ERR "SRAT: Too many proximity domains.\n"); + goto out_err_bad_srat; + } + + if (numa_add_memblk(node, start, end) < 0) + goto out_err_bad_srat; + + node_set(node, numa_nodes_parsed); + + pr_info("SRAT: Node %u PXM %u [mem %#010Lx-%#010Lx]%s\n", + node, pxm, + (unsigned long long) start, (unsigned long long) end - 1, + hotpluggable ? " hotplug" : ""); + + /* Mark hotplug range in memblock. */ + if (hotpluggable && memblock_mark_hotplug(start, ma->length)) + pr_warn("SRAT: Failed to mark hotplug range [mem %#010Lx-%#010Lx] in memblock\n", + (unsigned long long)start, (unsigned long long)end - 1); + + return 0; +out_err_bad_srat: + bad_srat(); +out_err: + return -1; +} + +void __init acpi_numa_arch_fixup(void) {} + +int __init x86_acpi_numa_init(void) +{ + int ret; + + ret = acpi_numa_init(); + if (ret < 0) + return ret; + return srat_disabled() ? -EINVAL : 0; +} |