diff options
Diffstat (limited to 'arch/xtensa')
36 files changed, 1231 insertions, 254 deletions
diff --git a/arch/xtensa/Kconfig b/arch/xtensa/Kconfig index 3bd3504a6..82044f732 100644 --- a/arch/xtensa/Kconfig +++ b/arch/xtensa/Kconfig @@ -17,6 +17,7 @@ config XTENSA select HAVE_DMA_API_DEBUG select HAVE_DMA_ATTRS select HAVE_FUNCTION_TRACER + select HAVE_FUTEX_CMPXCHG if !MMU select HAVE_IRQ_TIME_ACCOUNTING select HAVE_OPROFILE select HAVE_PERF_EVENTS @@ -397,6 +398,20 @@ config SIMDISK1_FILENAME source "mm/Kconfig" +config FORCE_MAX_ZONEORDER + int "Maximum zone order" + default "11" + help + The kernel memory allocator divides physically contiguous memory + blocks into "zones", where each zone is a power of two number of + pages. This option selects the largest power of two that the kernel + keeps in the memory allocator. If you need to allocate very large + blocks of physically contiguous memory, then you may need to + increase this value. + + This config option is actually maximum order plus one. For example, + a value of 11 means that the largest free memory block is 2^10 pages. + source "drivers/pcmcia/Kconfig" source "drivers/pci/hotplug/Kconfig" @@ -408,7 +423,7 @@ config DEFAULT_MEM_START hex "Physical address of the default memory area start" depends on PLATFORM_WANT_DEFAULT_MEM default 0x00000000 if MMU - default 0x40000000 if !MMU + default 0x60000000 if !MMU help This is a fallback start address of the default memory area, it is used when no physical memory size is passed through DTB or through diff --git a/arch/xtensa/Makefile b/arch/xtensa/Makefile index f9e6a068a..709b5748a 100644 --- a/arch/xtensa/Makefile +++ b/arch/xtensa/Makefile @@ -101,6 +101,10 @@ zImage: vmlinux %.dtb: $(Q)$(MAKE) $(build)=$(boot)/dts $(boot)/dts/$@ +dtbs: scripts + $(Q)$(MAKE) $(build)=$(boot)/dts + define archhelp @echo '* zImage - Compressed kernel image (arch/xtensa/boot/images/zImage.*)' + @echo ' dtbs - Build device tree blobs for enabled boards' endef diff --git a/arch/xtensa/boot/boot-elf/boot.lds.S b/arch/xtensa/boot/boot-elf/boot.lds.S index 958b33af9..e54f2c9df 100644 --- a/arch/xtensa/boot/boot-elf/boot.lds.S +++ b/arch/xtensa/boot/boot-elf/boot.lds.S @@ -40,17 +40,4 @@ SECTIONS *(.bss) __bss_end = .; } - -#ifdef CONFIG_MMU - /* - * This is a remapped copy of the Reset Vector Code. - * It keeps gdb in sync with the PC after switching - * to the temporary mapping used while setting up - * the V2 MMU mappings for Linux. - */ - .ResetVector.remapped_text 0x46000000 (INFO): - { - *(.ResetVector.remapped_text) - } -#endif } diff --git a/arch/xtensa/boot/boot-elf/bootstrap.S b/arch/xtensa/boot/boot-elf/bootstrap.S index 9341a5750..e6bf31361 100644 --- a/arch/xtensa/boot/boot-elf/bootstrap.S +++ b/arch/xtensa/boot/boot-elf/bootstrap.S @@ -58,8 +58,6 @@ _SetupMMU: wsr a0, ps rsync - Offset = _SetupMMU - _ResetVector - #ifndef CONFIG_INITIALIZE_XTENSA_MMU_INSIDE_VMLINUX initialize_mmu #endif @@ -74,29 +72,3 @@ reset: movi a3, 0 movi a4, 0 jx a0 - -#ifdef CONFIG_MMU - .align 4 - - .section .ResetVector.remapped_text, "x" - .global _RemappedResetVector - - /* Do org before literals */ - .org 0 - -_RemappedResetVector: - .begin no-absolute-literals - .literal_position - - _j _RemappedSetupMMU - - /* Position Remapped code at the same location as the original code */ - . = _RemappedResetVector + Offset - -_RemappedSetupMMU: -#ifndef CONFIG_INITIALIZE_XTENSA_MMU_INSIDE_VMLINUX - initialize_mmu -#endif - - .end no-absolute-literals -#endif diff --git a/arch/xtensa/boot/dts/Makefile b/arch/xtensa/boot/dts/Makefile index 5f711bba8..a15e241c9 100644 --- a/arch/xtensa/boot/dts/Makefile +++ b/arch/xtensa/boot/dts/Makefile @@ -12,4 +12,9 @@ ifneq ($(CONFIG_BUILTIN_DTB),"") obj-$(CONFIG_OF) += $(BUILTIN_DTB) endif -clean-files := *.dtb.S +dtstree := $(srctree)/$(src) +dtb-$(CONFIG_OF_ALL_DTBS) := $(patsubst $(dtstree)/%.dts,%.dtb, $(wildcard $(dtstree)/*.dts)) + +always += $(dtb-y) +clean-files += *.dtb *.dtb.S + diff --git a/arch/xtensa/boot/dts/kc705_nommu.dts b/arch/xtensa/boot/dts/kc705_nommu.dts new file mode 100644 index 000000000..65f3d741b --- /dev/null +++ b/arch/xtensa/boot/dts/kc705_nommu.dts @@ -0,0 +1,17 @@ +/dts-v1/; +/include/ "xtfpga.dtsi" +/include/ "xtfpga-flash-128m.dtsi" + +/ { + compatible = "cdns,xtensa-kc705"; + chosen { + bootargs = "earlycon=uart8250,mmio32,0x9d050020,115200n8 console=ttyS0,115200n8 ip=dhcp root=/dev/nfs rw debug"; + }; + memory@0 { + device_type = "memory"; + reg = <0x60000000 0x10000000>; + }; + soc { + ranges = <0x00000000 0x90000000 0x10000000>; + }; +}; diff --git a/arch/xtensa/configs/iss_defconfig b/arch/xtensa/configs/iss_defconfig index f3dfe0d92..44c6764d9 100644 --- a/arch/xtensa/configs/iss_defconfig +++ b/arch/xtensa/configs/iss_defconfig @@ -169,7 +169,6 @@ CONFIG_FLATMEM_MANUAL=y # CONFIG_SPARSEMEM_MANUAL is not set CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y -CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 # CONFIG_PHYS_ADDR_T_64BIT is not set CONFIG_ZONE_DMA_FLAG=1 diff --git a/arch/xtensa/configs/nommu_kc705_defconfig b/arch/xtensa/configs/nommu_kc705_defconfig new file mode 100644 index 000000000..337d5ba2d --- /dev/null +++ b/arch/xtensa/configs/nommu_kc705_defconfig @@ -0,0 +1,131 @@ +CONFIG_SYSVIPC=y +CONFIG_POSIX_MQUEUE=y +CONFIG_FHANDLE=y +CONFIG_IRQ_DOMAIN_DEBUG=y +CONFIG_NO_HZ_IDLE=y +CONFIG_HIGH_RES_TIMERS=y +CONFIG_IRQ_TIME_ACCOUNTING=y +CONFIG_BSD_PROCESS_ACCT=y +CONFIG_CGROUP_DEBUG=y +CONFIG_CGROUP_FREEZER=y +CONFIG_CGROUP_DEVICE=y +CONFIG_CPUSETS=y +CONFIG_CGROUP_CPUACCT=y +CONFIG_MEMCG=y +CONFIG_NAMESPACES=y +CONFIG_SCHED_AUTOGROUP=y +CONFIG_RELAY=y +CONFIG_BLK_DEV_INITRD=y +# CONFIG_RD_BZIP2 is not set +# CONFIG_RD_LZMA is not set +# CONFIG_RD_XZ is not set +# CONFIG_RD_LZO is not set +# CONFIG_RD_LZ4 is not set +CONFIG_EXPERT=y +CONFIG_SYSCTL_SYSCALL=y +CONFIG_KALLSYMS_ALL=y +CONFIG_PERF_EVENTS=y +CONFIG_MODULES=y +CONFIG_MODULE_UNLOAD=y +# CONFIG_IOSCHED_DEADLINE is not set +# CONFIG_IOSCHED_CFQ is not set +CONFIG_XTENSA_VARIANT_CUSTOM=y +CONFIG_XTENSA_VARIANT_CUSTOM_NAME="de212" +# CONFIG_XTENSA_VARIANT_MMU is not set +CONFIG_XTENSA_UNALIGNED_USER=y +CONFIG_PREEMPT=y +# CONFIG_PCI is not set +CONFIG_XTENSA_PLATFORM_XTFPGA=y +CONFIG_CMDLINE_BOOL=y +CONFIG_CMDLINE="earlycon=uart8250,mmio32,0x9d050020,115200n8 console=ttyS0,115200n8 ip=dhcp root=/dev/nfs rw debug" +CONFIG_USE_OF=y +CONFIG_BUILTIN_DTB="kc705_nommu" +CONFIG_DEFAULT_MEM_SIZE=0x10000000 +CONFIG_BINFMT_FLAT=y +CONFIG_NET=y +CONFIG_PACKET=y +CONFIG_UNIX=y +CONFIG_INET=y +CONFIG_IP_MULTICAST=y +CONFIG_IP_PNP=y +CONFIG_IP_PNP_DHCP=y +CONFIG_IP_PNP_BOOTP=y +CONFIG_IP_PNP_RARP=y +# CONFIG_IPV6 is not set +CONFIG_NETFILTER=y +# CONFIG_WIRELESS is not set +CONFIG_DEVTMPFS=y +CONFIG_DEVTMPFS_MOUNT=y +# CONFIG_STANDALONE is not set +CONFIG_MTD=y +CONFIG_MTD_CFI=y +CONFIG_MTD_JEDECPROBE=y +CONFIG_MTD_CFI_INTELEXT=y +CONFIG_MTD_CFI_AMDSTD=y +CONFIG_MTD_CFI_STAA=y +CONFIG_BLK_DEV_LOOP=y +CONFIG_BLK_DEV_RAM=y +CONFIG_SCSI=y +CONFIG_BLK_DEV_SD=y +CONFIG_NETDEVICES=y +# CONFIG_NET_VENDOR_ARC is not set +# CONFIG_NET_VENDOR_BROADCOM is not set +# CONFIG_NET_VENDOR_INTEL is not set +# CONFIG_NET_VENDOR_MARVELL is not set +# CONFIG_NET_VENDOR_MICREL is not set +# CONFIG_NET_VENDOR_NATSEMI is not set +# CONFIG_NET_VENDOR_SEEQ is not set +# CONFIG_NET_VENDOR_STMICRO is not set +# CONFIG_NET_VENDOR_VIA is not set +# CONFIG_NET_VENDOR_WIZNET is not set +CONFIG_MARVELL_PHY=y +# CONFIG_WLAN is not set +# CONFIG_INPUT_MOUSEDEV is not set +# CONFIG_INPUT_KEYBOARD is not set +# CONFIG_INPUT_MOUSE is not set +# CONFIG_SERIO is not set +CONFIG_SERIAL_8250=y +# CONFIG_SERIAL_8250_DEPRECATED_OPTIONS is not set +CONFIG_SERIAL_8250_CONSOLE=y +CONFIG_SERIAL_OF_PLATFORM=y +CONFIG_HW_RANDOM=y +# CONFIG_HWMON is not set +CONFIG_WATCHDOG=y +CONFIG_WATCHDOG_NOWAYOUT=y +CONFIG_SOFT_WATCHDOG=y +# CONFIG_VGA_CONSOLE is not set +# CONFIG_USB_SUPPORT is not set +CONFIG_EXT3_FS=y +CONFIG_EXT4_FS=y +CONFIG_FANOTIFY=y +CONFIG_VFAT_FS=y +CONFIG_JFFS2_FS=y +CONFIG_NFS_FS=y +CONFIG_NFS_V4=y +CONFIG_NFS_SWAP=y +CONFIG_ROOT_NFS=y +CONFIG_SUNRPC_DEBUG=y +CONFIG_NLS_CODEPAGE_437=y +CONFIG_NLS_ISO8859_1=y +CONFIG_PRINTK_TIME=y +CONFIG_DYNAMIC_DEBUG=y +CONFIG_DEBUG_INFO=y +# CONFIG_FRAME_POINTER is not set +CONFIG_MAGIC_SYSRQ=y +CONFIG_DEBUG_VM=y +CONFIG_DEBUG_NOMMU_REGIONS=y +CONFIG_DEBUG_SHIRQ=y +CONFIG_LOCKUP_DETECTOR=y +CONFIG_SCHEDSTATS=y +CONFIG_TIMER_STATS=y +CONFIG_DEBUG_RT_MUTEXES=y +CONFIG_DEBUG_SPINLOCK=y +CONFIG_DEBUG_MUTEXES=y +CONFIG_DEBUG_ATOMIC_SLEEP=y +CONFIG_STACKTRACE=y +# CONFIG_RCU_CPU_STALL_INFO is not set +CONFIG_RCU_TRACE=y +# CONFIG_FTRACE is not set +# CONFIG_LD_NO_RELAX is not set +# CONFIG_CRYPTO_ECHAINIV is not set +CONFIG_CRYPTO_ANSI_CPRNG=y diff --git a/arch/xtensa/include/asm/asmmacro.h b/arch/xtensa/include/asm/asmmacro.h index 755320f6e..746dcc8b5 100644 --- a/arch/xtensa/include/asm/asmmacro.h +++ b/arch/xtensa/include/asm/asmmacro.h @@ -35,9 +35,10 @@ * __loop as * restart loop. 'as' register must not have been modified! * - * __endla ar, at, incr + * __endla ar, as, incr * ar start address (modified) - * as scratch register used by macro + * as scratch register used by __loops/__loopi macros or + * end address used by __loopt macro * inc increment */ @@ -97,7 +98,7 @@ .endm /* - * loop from ar to ax + * loop from ar to as */ .macro __loopt ar, as, at, incr_log2 diff --git a/arch/xtensa/include/asm/atomic.h b/arch/xtensa/include/asm/atomic.h index 93795d047..fd8017ce2 100644 --- a/arch/xtensa/include/asm/atomic.h +++ b/arch/xtensa/include/asm/atomic.h @@ -47,7 +47,7 @@ * * Atomically reads the value of @v. */ -#define atomic_read(v) ACCESS_ONCE((v)->counter) +#define atomic_read(v) READ_ONCE((v)->counter) /** * atomic_set - set atomic variable @@ -56,7 +56,7 @@ * * Atomically sets the value of @v to @i. */ -#define atomic_set(v,i) ((v)->counter = (i)) +#define atomic_set(v,i) WRITE_ONCE((v)->counter, (i)) #if XCHAL_HAVE_S32C1I #define ATOMIC_OP(op) \ diff --git a/arch/xtensa/include/asm/cacheasm.h b/arch/xtensa/include/asm/cacheasm.h index 60e18773e..e0f9e1109 100644 --- a/arch/xtensa/include/asm/cacheasm.h +++ b/arch/xtensa/include/asm/cacheasm.h @@ -73,7 +73,9 @@ .macro ___unlock_dcache_all ar at +#if XCHAL_DCACHE_SIZE __loop_cache_all \ar \at diu XCHAL_DCACHE_SIZE XCHAL_DCACHE_LINEWIDTH +#endif .endm @@ -90,30 +92,38 @@ .macro ___flush_invalidate_dcache_all ar at +#if XCHAL_DCACHE_SIZE __loop_cache_all \ar \at diwbi XCHAL_DCACHE_SIZE XCHAL_DCACHE_LINEWIDTH +#endif .endm .macro ___flush_dcache_all ar at +#if XCHAL_DCACHE_SIZE __loop_cache_all \ar \at diwb XCHAL_DCACHE_SIZE XCHAL_DCACHE_LINEWIDTH +#endif .endm .macro ___invalidate_dcache_all ar at +#if XCHAL_DCACHE_SIZE __loop_cache_all \ar \at dii __stringify(DCACHE_WAY_SIZE) \ XCHAL_DCACHE_LINEWIDTH +#endif .endm .macro ___invalidate_icache_all ar at +#if XCHAL_ICACHE_SIZE __loop_cache_all \ar \at iii __stringify(ICACHE_WAY_SIZE) \ XCHAL_ICACHE_LINEWIDTH +#endif .endm @@ -121,28 +131,36 @@ .macro ___flush_invalidate_dcache_range ar as at +#if XCHAL_DCACHE_SIZE __loop_cache_range \ar \as \at dhwbi XCHAL_DCACHE_LINEWIDTH +#endif .endm .macro ___flush_dcache_range ar as at +#if XCHAL_DCACHE_SIZE __loop_cache_range \ar \as \at dhwb XCHAL_DCACHE_LINEWIDTH +#endif .endm .macro ___invalidate_dcache_range ar as at +#if XCHAL_DCACHE_SIZE __loop_cache_range \ar \as \at dhi XCHAL_DCACHE_LINEWIDTH +#endif .endm .macro ___invalidate_icache_range ar as at +#if XCHAL_ICACHE_SIZE __loop_cache_range \ar \as \at ihi XCHAL_ICACHE_LINEWIDTH +#endif .endm @@ -150,27 +168,35 @@ .macro ___flush_invalidate_dcache_page ar as +#if XCHAL_DCACHE_SIZE __loop_cache_page \ar \as dhwbi XCHAL_DCACHE_LINEWIDTH +#endif .endm .macro ___flush_dcache_page ar as +#if XCHAL_DCACHE_SIZE __loop_cache_page \ar \as dhwb XCHAL_DCACHE_LINEWIDTH +#endif .endm .macro ___invalidate_dcache_page ar as +#if XCHAL_DCACHE_SIZE __loop_cache_page \ar \as dhi XCHAL_DCACHE_LINEWIDTH +#endif .endm .macro ___invalidate_icache_page ar as +#if XCHAL_ICACHE_SIZE __loop_cache_page \ar \as ihi XCHAL_ICACHE_LINEWIDTH +#endif .endm diff --git a/arch/xtensa/include/asm/cacheflush.h b/arch/xtensa/include/asm/cacheflush.h index 5f67ace97..397d6a1a4 100644 --- a/arch/xtensa/include/asm/cacheflush.h +++ b/arch/xtensa/include/asm/cacheflush.h @@ -55,9 +55,14 @@ extern void __flush_dcache_range(unsigned long, unsigned long); extern void __flush_invalidate_dcache_page(unsigned long); extern void __flush_invalidate_dcache_range(unsigned long, unsigned long); #else -# define __flush_dcache_range(p,s) do { } while(0) -# define __flush_dcache_page(p) do { } while(0) -# define __flush_invalidate_dcache_page(p) __invalidate_dcache_page(p) +static inline void __flush_dcache_page(unsigned long va) +{ +} +static inline void __flush_dcache_range(unsigned long va, unsigned long sz) +{ +} +# define __flush_invalidate_dcache_all() __invalidate_dcache_all() +# define __flush_invalidate_dcache_page(p) __invalidate_dcache_page(p) # define __flush_invalidate_dcache_range(p,s) __invalidate_dcache_range(p,s) #endif @@ -174,99 +179,4 @@ extern void copy_from_user_page(struct vm_area_struct*, struct page*, #endif -#define XTENSA_CACHEBLK_LOG2 29 -#define XTENSA_CACHEBLK_SIZE (1 << XTENSA_CACHEBLK_LOG2) -#define XTENSA_CACHEBLK_MASK (7 << XTENSA_CACHEBLK_LOG2) - -#if XCHAL_HAVE_CACHEATTR -static inline u32 xtensa_get_cacheattr(void) -{ - u32 r; - asm volatile(" rsr %0, cacheattr" : "=a"(r)); - return r; -} - -static inline u32 xtensa_get_dtlb1(u32 addr) -{ - u32 r = addr & XTENSA_CACHEBLK_MASK; - return r | ((xtensa_get_cacheattr() >> (r >> (XTENSA_CACHEBLK_LOG2-2))) - & 0xF); -} -#else -static inline u32 xtensa_get_dtlb1(u32 addr) -{ - u32 r; - asm volatile(" rdtlb1 %0, %1" : "=a"(r) : "a"(addr)); - asm volatile(" dsync"); - return r; -} - -static inline u32 xtensa_get_cacheattr(void) -{ - u32 r = 0; - u32 a = 0; - do { - a -= XTENSA_CACHEBLK_SIZE; - r = (r << 4) | (xtensa_get_dtlb1(a) & 0xF); - } while (a); - return r; -} -#endif - -static inline int xtensa_need_flush_dma_source(u32 addr) -{ - return (xtensa_get_dtlb1(addr) & ((1 << XCHAL_CA_BITS) - 1)) >= 4; -} - -static inline int xtensa_need_invalidate_dma_destination(u32 addr) -{ - return (xtensa_get_dtlb1(addr) & ((1 << XCHAL_CA_BITS) - 1)) != 2; -} - -static inline void flush_dcache_unaligned(u32 addr, u32 size) -{ - u32 cnt; - if (size) { - cnt = (size + ((XCHAL_DCACHE_LINESIZE - 1) & addr) - + XCHAL_DCACHE_LINESIZE - 1) / XCHAL_DCACHE_LINESIZE; - while (cnt--) { - asm volatile(" dhwb %0, 0" : : "a"(addr)); - addr += XCHAL_DCACHE_LINESIZE; - } - asm volatile(" dsync"); - } -} - -static inline void invalidate_dcache_unaligned(u32 addr, u32 size) -{ - int cnt; - if (size) { - asm volatile(" dhwbi %0, 0 ;" : : "a"(addr)); - cnt = (size + ((XCHAL_DCACHE_LINESIZE - 1) & addr) - - XCHAL_DCACHE_LINESIZE - 1) / XCHAL_DCACHE_LINESIZE; - while (cnt-- > 0) { - asm volatile(" dhi %0, %1" : : "a"(addr), - "n"(XCHAL_DCACHE_LINESIZE)); - addr += XCHAL_DCACHE_LINESIZE; - } - asm volatile(" dhwbi %0, %1" : : "a"(addr), - "n"(XCHAL_DCACHE_LINESIZE)); - asm volatile(" dsync"); - } -} - -static inline void flush_invalidate_dcache_unaligned(u32 addr, u32 size) -{ - u32 cnt; - if (size) { - cnt = (size + ((XCHAL_DCACHE_LINESIZE - 1) & addr) - + XCHAL_DCACHE_LINESIZE - 1) / XCHAL_DCACHE_LINESIZE; - while (cnt--) { - asm volatile(" dhwbi %0, 0" : : "a"(addr)); - addr += XCHAL_DCACHE_LINESIZE; - } - asm volatile(" dsync"); - } -} - #endif /* _XTENSA_CACHEFLUSH_H */ diff --git a/arch/xtensa/include/asm/dma-mapping.h b/arch/xtensa/include/asm/dma-mapping.h index 4427f38b6..66c9ba261 100644 --- a/arch/xtensa/include/asm/dma-mapping.h +++ b/arch/xtensa/include/asm/dma-mapping.h @@ -35,4 +35,14 @@ static inline struct dma_map_ops *get_dma_ops(struct device *dev) void dma_cache_sync(struct device *dev, void *vaddr, size_t size, enum dma_data_direction direction); +static inline dma_addr_t phys_to_dma(struct device *dev, phys_addr_t paddr) +{ + return (dma_addr_t)paddr; +} + +static inline phys_addr_t dma_to_phys(struct device *dev, dma_addr_t daddr) +{ + return (phys_addr_t)daddr; +} + #endif /* _XTENSA_DMA_MAPPING_H */ diff --git a/arch/xtensa/include/asm/initialize_mmu.h b/arch/xtensa/include/asm/initialize_mmu.h index e256f2270..7a1e07596 100644 --- a/arch/xtensa/include/asm/initialize_mmu.h +++ b/arch/xtensa/include/asm/initialize_mmu.h @@ -161,7 +161,8 @@ #endif /* defined(CONFIG_MMU) && XCHAL_HAVE_PTP_MMU && XCHAL_HAVE_SPANNING_WAY */ -#if !defined(CONFIG_MMU) && XCHAL_HAVE_TLBS +#if !defined(CONFIG_MMU) && XCHAL_HAVE_TLBS && \ + (XCHAL_DCACHE_SIZE || XCHAL_ICACHE_SIZE) /* Enable data and instruction cache in the DEFAULT_MEMORY region * if the processor has DTLB and ITLB. */ @@ -175,14 +176,18 @@ 1: sub a9, a9, a8 2: +#if XCHAL_DCACHE_SIZE rdtlb1 a3, a5 - ritlb1 a4, a5 and a3, a3, a6 - and a4, a4, a6 or a3, a3, a7 - or a4, a4, a7 wdtlb a3, a5 +#endif +#if XCHAL_ICACHE_SIZE + ritlb1 a4, a5 + and a4, a4, a6 + or a4, a4, a7 witlb a4, a5 +#endif add a5, a5, a8 bltu a8, a9, 1b diff --git a/arch/xtensa/include/asm/io.h b/arch/xtensa/include/asm/io.h index 867840f54..74fed0b4e 100644 --- a/arch/xtensa/include/asm/io.h +++ b/arch/xtensa/include/asm/io.h @@ -25,15 +25,6 @@ #ifdef CONFIG_MMU -#if XCHAL_HAVE_PTP_MMU && XCHAL_HAVE_SPANNING_WAY && defined(CONFIG_OF) -extern unsigned long xtensa_kio_paddr; - -static inline unsigned long xtensa_get_kio_paddr(void) -{ - return xtensa_kio_paddr; -} -#endif - /* * Return the virtual address for the specified bus memory. * Note that we currently don't support any address outside the KIO segment. diff --git a/arch/xtensa/include/asm/pgtable.h b/arch/xtensa/include/asm/pgtable.h index a5e929a10..fb02fdc5e 100644 --- a/arch/xtensa/include/asm/pgtable.h +++ b/arch/xtensa/include/asm/pgtable.h @@ -18,7 +18,11 @@ * We only use two ring levels, user and kernel space. */ +#ifdef CONFIG_MMU #define USER_RING 1 /* user ring level */ +#else +#define USER_RING 0 +#endif #define KERNEL_RING 0 /* kernel ring level */ /* diff --git a/arch/xtensa/include/asm/vectors.h b/arch/xtensa/include/asm/vectors.h index a46c53f36..288c77673 100644 --- a/arch/xtensa/include/asm/vectors.h +++ b/arch/xtensa/include/asm/vectors.h @@ -21,13 +21,26 @@ #include <variant/core.h> #include <platform/hardware.h> +#if XCHAL_HAVE_PTP_MMU #define XCHAL_KIO_CACHED_VADDR 0xe0000000 #define XCHAL_KIO_BYPASS_VADDR 0xf0000000 #define XCHAL_KIO_DEFAULT_PADDR 0xf0000000 +#else +#define XCHAL_KIO_BYPASS_VADDR XCHAL_KIO_PADDR +#define XCHAL_KIO_DEFAULT_PADDR 0x90000000 +#endif #define XCHAL_KIO_SIZE 0x10000000 -#if XCHAL_HAVE_PTP_MMU && XCHAL_HAVE_SPANNING_WAY && defined(CONFIG_OF) +#if (!XCHAL_HAVE_PTP_MMU || XCHAL_HAVE_SPANNING_WAY) && defined(CONFIG_OF) #define XCHAL_KIO_PADDR xtensa_get_kio_paddr() +#ifndef __ASSEMBLY__ +extern unsigned long xtensa_kio_paddr; + +static inline unsigned long xtensa_get_kio_paddr(void) +{ + return xtensa_kio_paddr; +} +#endif #else #define XCHAL_KIO_PADDR XCHAL_KIO_DEFAULT_PADDR #endif @@ -48,6 +61,9 @@ #define LOAD_MEMORY_ADDRESS 0xD0003000 #endif +#define RESET_VECTOR1_VADDR (VIRTUAL_MEMORY_ADDRESS + \ + XCHAL_RESET_VECTOR1_PADDR) + #else /* !defined(CONFIG_MMU) */ /* MMU Not being used - Virtual == Physical */ @@ -60,6 +76,8 @@ /* Loaded just above possibly live vectors */ #define LOAD_MEMORY_ADDRESS (PLATFORM_DEFAULT_MEM_START + 0x3000) +#define RESET_VECTOR1_VADDR (XCHAL_RESET_VECTOR1_VADDR) + #endif /* CONFIG_MMU */ #define XC_VADDR(offset) (VIRTUAL_MEMORY_ADDRESS + offset) @@ -67,14 +85,6 @@ /* Used to set VECBASE register */ #define VECBASE_RESET_VADDR VIRTUAL_MEMORY_ADDRESS -#define RESET_VECTOR_VECOFS (XCHAL_RESET_VECTOR_VADDR - \ - VECBASE_RESET_VADDR) -#define RESET_VECTOR_VADDR XC_VADDR(RESET_VECTOR_VECOFS) - -#define RESET_VECTOR1_VECOFS (XCHAL_RESET_VECTOR1_VADDR - \ - VECBASE_RESET_VADDR) -#define RESET_VECTOR1_VADDR XC_VADDR(RESET_VECTOR1_VECOFS) - #if defined(XCHAL_HAVE_VECBASE) && XCHAL_HAVE_VECBASE #define USER_VECTOR_VADDR XC_VADDR(XCHAL_USER_VECOFS) diff --git a/arch/xtensa/include/uapi/asm/mman.h b/arch/xtensa/include/uapi/asm/mman.h index 201aec0e0..360944e1d 100644 --- a/arch/xtensa/include/uapi/asm/mman.h +++ b/arch/xtensa/include/uapi/asm/mman.h @@ -74,6 +74,12 @@ */ #define MCL_CURRENT 1 /* lock all current mappings */ #define MCL_FUTURE 2 /* lock all future mappings */ +#define MCL_ONFAULT 4 /* lock all pages that are faulted in */ + +/* + * Flags for mlock + */ +#define MLOCK_ONFAULT 0x01 /* Lock pages in range after they are faulted in, do not prefault */ #define MADV_NORMAL 0 /* no further special treatment */ #define MADV_RANDOM 1 /* expect random page references */ diff --git a/arch/xtensa/kernel/Makefile b/arch/xtensa/kernel/Makefile index 50137bc9e..4db730290 100644 --- a/arch/xtensa/kernel/Makefile +++ b/arch/xtensa/kernel/Makefile @@ -16,6 +16,7 @@ obj-$(CONFIG_SMP) += smp.o mxhead.o obj-$(CONFIG_XTENSA_VARIANT_HAVE_PERF_EVENTS) += perf_event.o AFLAGS_head.o += -mtext-section-literals +AFLAGS_mxhead.o += -mtext-section-literals # In the Xtensa architecture, assembly generates literals which must always # precede the L32R instruction with a relative offset less than 256 kB. diff --git a/arch/xtensa/kernel/entry.S b/arch/xtensa/kernel/entry.S index 504130357..db5c1765b 100644 --- a/arch/xtensa/kernel/entry.S +++ b/arch/xtensa/kernel/entry.S @@ -367,8 +367,10 @@ common_exception: s32i a2, a1, PT_SYSCALL movi a2, 0 s32i a3, a1, PT_EXCVADDR +#if XCHAL_HAVE_LOOPS xsr a2, lcount s32i a2, a1, PT_LCOUNT +#endif /* It is now save to restore the EXC_TABLE_FIXUP variable. */ @@ -429,11 +431,12 @@ common_exception: rsync # PS.WOE => rsync => overflow /* Save lbeg, lend */ - +#if XCHAL_HAVE_LOOPS rsr a4, lbeg rsr a3, lend s32i a4, a1, PT_LBEG s32i a3, a1, PT_LEND +#endif /* Save SCOMPARE1 */ @@ -724,13 +727,14 @@ common_exception_exit: wsr a3, sar /* Restore LBEG, LEND, LCOUNT */ - +#if XCHAL_HAVE_LOOPS l32i a2, a1, PT_LBEG l32i a3, a1, PT_LEND wsr a2, lbeg l32i a2, a1, PT_LCOUNT wsr a3, lend wsr a2, lcount +#endif /* We control single stepping through the ICOUNTLEVEL register. */ diff --git a/arch/xtensa/kernel/head.S b/arch/xtensa/kernel/head.S index 15a461e2a..9ed55649a 100644 --- a/arch/xtensa/kernel/head.S +++ b/arch/xtensa/kernel/head.S @@ -249,7 +249,7 @@ ENTRY(_startup) __loopt a2, a3, a4, 2 s32i a0, a2, 0 - __endla a2, a4, 4 + __endla a2, a3, 4 #if XCHAL_DCACHE_IS_WRITEBACK diff --git a/arch/xtensa/kernel/mxhead.S b/arch/xtensa/kernel/mxhead.S index 77a161a11..9f3843742 100644 --- a/arch/xtensa/kernel/mxhead.S +++ b/arch/xtensa/kernel/mxhead.S @@ -48,8 +48,6 @@ _SetupOCD: rsync _SetupMMU: - Offset = _SetupMMU - _SecondaryResetVector - #ifdef CONFIG_INITIALIZE_XTENSA_MMU_INSIDE_VMLINUX initialize_mmu #endif @@ -62,24 +60,3 @@ _SetupMMU: jx a3 .end no-absolute-literals - - - .section .SecondaryResetVector.remapped_text, "ax" - .global _RemappedSecondaryResetVector - - .org 0 # Need to do org before literals - -_RemappedSecondaryResetVector: - .begin no-absolute-literals - .literal_position - - _j _RemappedSetupMMU - . = _RemappedSecondaryResetVector + Offset - -_RemappedSetupMMU: - -#ifdef CONFIG_INITIALIZE_XTENSA_MMU_INSIDE_VMLINUX - initialize_mmu -#endif - - .end no-absolute-literals diff --git a/arch/xtensa/kernel/pci-dma.c b/arch/xtensa/kernel/pci-dma.c index fb75ebf14..cd6669834 100644 --- a/arch/xtensa/kernel/pci-dma.c +++ b/arch/xtensa/kernel/pci-dma.c @@ -15,14 +15,15 @@ * Joe Taylor <joe@tensilica.com, joetylr@yahoo.com> */ -#include <linux/types.h> -#include <linux/mm.h> -#include <linux/string.h> -#include <linux/pci.h> #include <linux/gfp.h> +#include <linux/highmem.h> +#include <linux/mm.h> #include <linux/module.h> -#include <asm/io.h> +#include <linux/pci.h> +#include <linux/string.h> +#include <linux/types.h> #include <asm/cacheflush.h> +#include <asm/io.h> void dma_cache_sync(struct device *dev, void *vaddr, size_t size, enum dma_data_direction dir) @@ -47,17 +48,36 @@ void dma_cache_sync(struct device *dev, void *vaddr, size_t size, } EXPORT_SYMBOL(dma_cache_sync); +static void do_cache_op(dma_addr_t dma_handle, size_t size, + void (*fn)(unsigned long, unsigned long)) +{ + unsigned long off = dma_handle & (PAGE_SIZE - 1); + unsigned long pfn = PFN_DOWN(dma_handle); + struct page *page = pfn_to_page(pfn); + + if (!PageHighMem(page)) + fn((unsigned long)bus_to_virt(dma_handle), size); + else + while (size > 0) { + size_t sz = min_t(size_t, size, PAGE_SIZE - off); + void *vaddr = kmap_atomic(page); + + fn((unsigned long)vaddr + off, sz); + kunmap_atomic(vaddr); + off = 0; + ++page; + size -= sz; + } +} + static void xtensa_sync_single_for_cpu(struct device *dev, dma_addr_t dma_handle, size_t size, enum dma_data_direction dir) { - void *vaddr; - switch (dir) { case DMA_BIDIRECTIONAL: case DMA_FROM_DEVICE: - vaddr = bus_to_virt(dma_handle); - __invalidate_dcache_range((unsigned long)vaddr, size); + do_cache_op(dma_handle, size, __invalidate_dcache_range); break; case DMA_NONE: @@ -73,13 +93,11 @@ static void xtensa_sync_single_for_device(struct device *dev, dma_addr_t dma_handle, size_t size, enum dma_data_direction dir) { - void *vaddr; - switch (dir) { case DMA_BIDIRECTIONAL: case DMA_TO_DEVICE: - vaddr = bus_to_virt(dma_handle); - __flush_dcache_range((unsigned long)vaddr, size); + if (XCHAL_DCACHE_IS_WRITEBACK) + do_cache_op(dma_handle, size, __flush_dcache_range); break; case DMA_NONE: @@ -171,7 +189,6 @@ static dma_addr_t xtensa_map_page(struct device *dev, struct page *page, { dma_addr_t dma_handle = page_to_phys(page) + offset; - BUG_ON(PageHighMem(page)); xtensa_sync_single_for_device(dev, dma_handle, size, dir); return dma_handle; } diff --git a/arch/xtensa/kernel/setup.c b/arch/xtensa/kernel/setup.c index 28fc57ef5..9735691f3 100644 --- a/arch/xtensa/kernel/setup.c +++ b/arch/xtensa/kernel/setup.c @@ -190,7 +190,7 @@ static int __init parse_bootparam(const bp_tag_t* tag) #ifdef CONFIG_OF bool __initdata dt_memory_scan = false; -#if XCHAL_HAVE_PTP_MMU && XCHAL_HAVE_SPANNING_WAY +#if !XCHAL_HAVE_PTP_MMU || XCHAL_HAVE_SPANNING_WAY unsigned long xtensa_kio_paddr = XCHAL_KIO_DEFAULT_PADDR; EXPORT_SYMBOL(xtensa_kio_paddr); @@ -334,7 +334,10 @@ extern char _Level5InterruptVector_text_end; extern char _Level6InterruptVector_text_start; extern char _Level6InterruptVector_text_end; #endif - +#ifdef CONFIG_SMP +extern char _SecondaryResetVector_text_start; +extern char _SecondaryResetVector_text_end; +#endif #ifdef CONFIG_S32C1I_SELFTEST @@ -506,6 +509,10 @@ void __init setup_arch(char **cmdline_p) __pa(&_Level6InterruptVector_text_end), 0); #endif +#ifdef CONFIG_SMP + mem_reserve(__pa(&_SecondaryResetVector_text_start), + __pa(&_SecondaryResetVector_text_end), 0); +#endif parse_early_param(); bootmem_init(); diff --git a/arch/xtensa/kernel/time.c b/arch/xtensa/kernel/time.c index b97767dbc..b9ad9fead 100644 --- a/arch/xtensa/kernel/time.c +++ b/arch/xtensa/kernel/time.c @@ -148,7 +148,7 @@ void __init time_init(void) local_timer_setup(0); setup_irq(this_cpu_ptr(&ccount_timer)->evt.irq, &timer_irqaction); sched_clock_register(ccount_sched_clock_read, 32, ccount_freq); - clocksource_of_init(); + clocksource_probe(); } /* diff --git a/arch/xtensa/kernel/vectors.S b/arch/xtensa/kernel/vectors.S index abcdb527f..fc25318e7 100644 --- a/arch/xtensa/kernel/vectors.S +++ b/arch/xtensa/kernel/vectors.S @@ -478,6 +478,9 @@ _DoubleExceptionVector_handle_exception: ENDPROC(_DoubleExceptionVector) + .end literal_prefix + + .text /* * Fixup handler for TLB miss in double exception handler for window owerflow. * We get here with windowbase set to the window that was being spilled and @@ -587,7 +590,6 @@ ENTRY(window_overflow_restore_a0_fixup) ENDPROC(window_overflow_restore_a0_fixup) - .end literal_prefix /* * Debug interrupt vector * diff --git a/arch/xtensa/kernel/vmlinux.lds.S b/arch/xtensa/kernel/vmlinux.lds.S index fc1bc2ba8..c417cbe4e 100644 --- a/arch/xtensa/kernel/vmlinux.lds.S +++ b/arch/xtensa/kernel/vmlinux.lds.S @@ -166,8 +166,6 @@ SECTIONS RELOCATE_ENTRY(_DebugInterruptVector_text, .DebugInterruptVector.text); #if defined(CONFIG_SMP) - RELOCATE_ENTRY(_SecondaryResetVector_literal, - .SecondaryResetVector.literal); RELOCATE_ENTRY(_SecondaryResetVector_text, .SecondaryResetVector.text); #endif @@ -282,17 +280,11 @@ SECTIONS #if defined(CONFIG_SMP) - SECTION_VECTOR (_SecondaryResetVector_literal, - .SecondaryResetVector.literal, - RESET_VECTOR1_VADDR - 4, - SIZEOF(.DoubleExceptionVector.text), - .DoubleExceptionVector.text) - SECTION_VECTOR (_SecondaryResetVector_text, .SecondaryResetVector.text, RESET_VECTOR1_VADDR, - 4, - .SecondaryResetVector.literal) + SIZEOF(.DoubleExceptionVector.text), + .DoubleExceptionVector.text) . = LOADADDR(.SecondaryResetVector.text)+SIZEOF(.SecondaryResetVector.text); @@ -306,31 +298,6 @@ SECTIONS _end = .; - /* only used by the boot loader */ - - . = ALIGN(0x10); - .bootstrap : { *(.bootstrap.literal .bootstrap.text .bootstrap.data) } - - .ResetVector.text RESET_VECTOR_VADDR : - { - *(.ResetVector.text) - } - - - /* - * This is a remapped copy of the Secondary Reset Vector Code. - * It keeps gdb in sync with the PC after switching - * to the temporary mapping used while setting up - * the V2 MMU mappings for Linux. - * - * Only debug information about this section is put in the kernel image. - */ - .SecondaryResetVector.remapped_text 0x46000000 (INFO): - { - *(.SecondaryResetVector.remapped_text) - } - - .xt.lit : { *(.xt.lit) } .xt.prop : { *(.xt.prop) } diff --git a/arch/xtensa/lib/usercopy.S b/arch/xtensa/lib/usercopy.S index ace1892a8..7ea4dd688 100644 --- a/arch/xtensa/lib/usercopy.S +++ b/arch/xtensa/lib/usercopy.S @@ -222,8 +222,8 @@ __xtensa_copy_user: loopnez a7, .Loop2done #else /* !XCHAL_HAVE_LOOPS */ beqz a7, .Loop2done - slli a10, a7, 4 - add a10, a10, a3 # a10 = end of last 16B source chunk + slli a12, a7, 4 + add a12, a12, a3 # a12 = end of last 16B source chunk #endif /* !XCHAL_HAVE_LOOPS */ .Loop2: EX(l32i, a7, a3, 4, l_fixup) @@ -241,7 +241,7 @@ __xtensa_copy_user: EX(s32i, a9, a5, 12, s_fixup) addi a5, a5, 16 #if !XCHAL_HAVE_LOOPS - blt a3, a10, .Loop2 + blt a3, a12, .Loop2 #endif /* !XCHAL_HAVE_LOOPS */ .Loop2done: bbci.l a4, 3, .L12 diff --git a/arch/xtensa/platforms/iss/setup.c b/arch/xtensa/platforms/iss/setup.c index da7d18240..391820539 100644 --- a/arch/xtensa/platforms/iss/setup.c +++ b/arch/xtensa/platforms/iss/setup.c @@ -61,7 +61,9 @@ void platform_restart(void) #if XCHAL_NUM_IBREAK > 0 "wsr a2, ibreakenable\n\t" #endif +#if XCHAL_HAVE_LOOPS "wsr a2, lcount\n\t" +#endif "movi a2, 0x1f\n\t" "wsr a2, ps\n\t" "isync\n\t" diff --git a/arch/xtensa/platforms/iss/simdisk.c b/arch/xtensa/platforms/iss/simdisk.c index fa84ca990..3c3ace2c4 100644 --- a/arch/xtensa/platforms/iss/simdisk.c +++ b/arch/xtensa/platforms/iss/simdisk.c @@ -101,7 +101,7 @@ static void simdisk_transfer(struct simdisk *dev, unsigned long sector, spin_unlock(&dev->lock); } -static void simdisk_make_request(struct request_queue *q, struct bio *bio) +static blk_qc_t simdisk_make_request(struct request_queue *q, struct bio *bio) { struct simdisk *dev = q->queuedata; struct bio_vec bvec; @@ -119,6 +119,7 @@ static void simdisk_make_request(struct request_queue *q, struct bio *bio) } bio_endio(bio); + return BLK_QC_T_NONE; } static int simdisk_open(struct block_device *bdev, fmode_t mode) diff --git a/arch/xtensa/platforms/xt2000/setup.c b/arch/xtensa/platforms/xt2000/setup.c index b90555cb8..87678961a 100644 --- a/arch/xtensa/platforms/xt2000/setup.c +++ b/arch/xtensa/platforms/xt2000/setup.c @@ -72,7 +72,9 @@ void platform_restart(void) #if XCHAL_NUM_IBREAK > 0 "wsr a2, ibreakenable\n\t" #endif +#if XCHAL_HAVE_LOOPS "wsr a2, lcount\n\t" +#endif "movi a2, 0x1f\n\t" "wsr a2, ps\n\t" "isync\n\t" diff --git a/arch/xtensa/platforms/xtfpga/include/platform/hardware.h b/arch/xtensa/platforms/xtfpga/include/platform/hardware.h index 0a55bb9c5..dbeea2b44 100644 --- a/arch/xtensa/platforms/xtfpga/include/platform/hardware.h +++ b/arch/xtensa/platforms/xtfpga/include/platform/hardware.h @@ -12,13 +12,15 @@ * This file contains the hardware configuration of the XTAVNET boards. */ +#include <asm/types.h> + #ifndef __XTENSA_XTAVNET_HARDWARE_H #define __XTENSA_XTAVNET_HARDWARE_H /* Memory configuration. */ -#define PLATFORM_DEFAULT_MEM_START CONFIG_DEFAULT_MEM_START -#define PLATFORM_DEFAULT_MEM_SIZE CONFIG_DEFAULT_MEM_SIZE +#define PLATFORM_DEFAULT_MEM_START __XTENSA_UL(CONFIG_DEFAULT_MEM_START) +#define PLATFORM_DEFAULT_MEM_SIZE __XTENSA_UL(CONFIG_DEFAULT_MEM_SIZE) /* Interrupt configuration. */ diff --git a/arch/xtensa/platforms/xtfpga/setup.c b/arch/xtensa/platforms/xtfpga/setup.c index b4cf70e53..e9f65f79c 100644 --- a/arch/xtensa/platforms/xtfpga/setup.c +++ b/arch/xtensa/platforms/xtfpga/setup.c @@ -63,7 +63,9 @@ void platform_restart(void) #if XCHAL_NUM_IBREAK > 0 "wsr a2, ibreakenable\n\t" #endif +#if XCHAL_HAVE_LOOPS "wsr a2, lcount\n\t" +#endif "movi a2, 0x1f\n\t" "wsr a2, ps\n\t" "isync\n\t" diff --git a/arch/xtensa/variants/de212/include/variant/core.h b/arch/xtensa/variants/de212/include/variant/core.h new file mode 100644 index 000000000..59e91e47e --- /dev/null +++ b/arch/xtensa/variants/de212/include/variant/core.h @@ -0,0 +1,594 @@ +/* + * xtensa/config/core-isa.h -- HAL definitions that are dependent on Xtensa + * processor CORE configuration + * + * See <xtensa/config/core.h>, which includes this file, for more details. + */ + +/* Xtensa processor core configuration information. + + Copyright (c) 1999-2015 Tensilica Inc. + + Permission is hereby granted, free of charge, to any person obtaining + a copy of this software and associated documentation files (the + "Software"), to deal in the Software without restriction, including + without limitation the rights to use, copy, modify, merge, publish, + distribute, sublicense, and/or sell copies of the Software, and to + permit persons to whom the Software is furnished to do so, subject to + the following conditions: + + The above copyright notice and this permission notice shall be included + in all copies or substantial portions of the Software. + + THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF + MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. + IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY + CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, + TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE + SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE. */ + +#ifndef _XTENSA_CORE_CONFIGURATION_H +#define _XTENSA_CORE_CONFIGURATION_H + + +/**************************************************************************** + Parameters Useful for Any Code, USER or PRIVILEGED + ****************************************************************************/ + +/* + * Note: Macros of the form XCHAL_HAVE_*** have a value of 1 if the option is + * configured, and a value of 0 otherwise. These macros are always defined. + */ + + +/*---------------------------------------------------------------------- + ISA + ----------------------------------------------------------------------*/ + +#define XCHAL_HAVE_BE 0 /* big-endian byte ordering */ +#define XCHAL_HAVE_WINDOWED 1 /* windowed registers option */ +#define XCHAL_NUM_AREGS 32 /* num of physical addr regs */ +#define XCHAL_NUM_AREGS_LOG2 5 /* log2(XCHAL_NUM_AREGS) */ +#define XCHAL_MAX_INSTRUCTION_SIZE 3 /* max instr bytes (3..8) */ +#define XCHAL_HAVE_DEBUG 1 /* debug option */ +#define XCHAL_HAVE_DENSITY 1 /* 16-bit instructions */ +#define XCHAL_HAVE_LOOPS 1 /* zero-overhead loops */ +#define XCHAL_LOOP_BUFFER_SIZE 0 /* zero-ov. loop instr buffer size */ +#define XCHAL_HAVE_NSA 1 /* NSA/NSAU instructions */ +#define XCHAL_HAVE_MINMAX 1 /* MIN/MAX instructions */ +#define XCHAL_HAVE_SEXT 1 /* SEXT instruction */ +#define XCHAL_HAVE_DEPBITS 0 /* DEPBITS instruction */ +#define XCHAL_HAVE_CLAMPS 1 /* CLAMPS instruction */ +#define XCHAL_HAVE_MUL16 1 /* MUL16S/MUL16U instructions */ +#define XCHAL_HAVE_MUL32 1 /* MULL instruction */ +#define XCHAL_HAVE_MUL32_HIGH 0 /* MULUH/MULSH instructions */ +#define XCHAL_HAVE_DIV32 1 /* QUOS/QUOU/REMS/REMU instructions */ +#define XCHAL_HAVE_L32R 1 /* L32R instruction */ +#define XCHAL_HAVE_ABSOLUTE_LITERALS 0 /* non-PC-rel (extended) L32R */ +#define XCHAL_HAVE_CONST16 0 /* CONST16 instruction */ +#define XCHAL_HAVE_ADDX 1 /* ADDX#/SUBX# instructions */ +#define XCHAL_HAVE_WIDE_BRANCHES 0 /* B*.W18 or B*.W15 instr's */ +#define XCHAL_HAVE_PREDICTED_BRANCHES 0 /* B[EQ/EQZ/NE/NEZ]T instr's */ +#define XCHAL_HAVE_CALL4AND12 1 /* (obsolete option) */ +#define XCHAL_HAVE_ABS 1 /* ABS instruction */ +/*#define XCHAL_HAVE_POPC 0*/ /* POPC instruction */ +/*#define XCHAL_HAVE_CRC 0*/ /* CRC instruction */ +#define XCHAL_HAVE_RELEASE_SYNC 1 /* L32AI/S32RI instructions */ +#define XCHAL_HAVE_S32C1I 1 /* S32C1I instruction */ +#define XCHAL_HAVE_SPECULATION 0 /* speculation */ +#define XCHAL_HAVE_FULL_RESET 1 /* all regs/state reset */ +#define XCHAL_NUM_CONTEXTS 1 /* */ +#define XCHAL_NUM_MISC_REGS 2 /* num of scratch regs (0..4) */ +#define XCHAL_HAVE_TAP_MASTER 0 /* JTAG TAP control instr's */ +#define XCHAL_HAVE_PRID 1 /* processor ID register */ +#define XCHAL_HAVE_EXTERN_REGS 1 /* WER/RER instructions */ +#define XCHAL_HAVE_MX 0 /* MX core (Tensilica internal) */ +#define XCHAL_HAVE_MP_INTERRUPTS 0 /* interrupt distributor port */ +#define XCHAL_HAVE_MP_RUNSTALL 0 /* core RunStall control port */ +#define XCHAL_HAVE_PSO 0 /* Power Shut-Off */ +#define XCHAL_HAVE_PSO_CDM 0 /* core/debug/mem pwr domains */ +#define XCHAL_HAVE_PSO_FULL_RETENTION 0 /* all regs preserved on PSO */ +#define XCHAL_HAVE_THREADPTR 0 /* THREADPTR register */ +#define XCHAL_HAVE_BOOLEANS 0 /* boolean registers */ +#define XCHAL_HAVE_CP 0 /* CPENABLE reg (coprocessor) */ +#define XCHAL_CP_MAXCFG 0 /* max allowed cp id plus one */ +#define XCHAL_HAVE_MAC16 1 /* MAC16 package */ + +#define XCHAL_HAVE_FUSION 0 /* Fusion*/ +#define XCHAL_HAVE_FUSION_FP 0 /* Fusion FP option */ +#define XCHAL_HAVE_FUSION_LOW_POWER 0 /* Fusion Low Power option */ +#define XCHAL_HAVE_FUSION_AES 0 /* Fusion BLE/Wifi AES-128 CCM option */ +#define XCHAL_HAVE_FUSION_CONVENC 0 /* Fusion Conv Encode option */ +#define XCHAL_HAVE_FUSION_LFSR_CRC 0 /* Fusion LFSR-CRC option */ +#define XCHAL_HAVE_FUSION_BITOPS 0 /* Fusion Bit Operations Support option */ +#define XCHAL_HAVE_FUSION_AVS 0 /* Fusion AVS option */ +#define XCHAL_HAVE_FUSION_16BIT_BASEBAND 0 /* Fusion 16-bit Baseband option */ +#define XCHAL_HAVE_HIFIPRO 0 /* HiFiPro Audio Engine pkg */ +#define XCHAL_HAVE_HIFI4 0 /* HiFi4 Audio Engine pkg */ +#define XCHAL_HAVE_HIFI4_VFPU 0 /* HiFi4 Audio Engine VFPU option */ +#define XCHAL_HAVE_HIFI3 0 /* HiFi3 Audio Engine pkg */ +#define XCHAL_HAVE_HIFI3_VFPU 0 /* HiFi3 Audio Engine VFPU option */ +#define XCHAL_HAVE_HIFI2 0 /* HiFi2 Audio Engine pkg */ +#define XCHAL_HAVE_HIFI2EP 0 /* HiFi2EP */ +#define XCHAL_HAVE_HIFI_MINI 0 + + +#define XCHAL_HAVE_VECTORFPU2005 0 /* vector or user floating-point pkg */ +#define XCHAL_HAVE_USER_DPFPU 0 /* user DP floating-point pkg */ +#define XCHAL_HAVE_USER_SPFPU 0 /* user DP floating-point pkg */ +#define XCHAL_HAVE_FP 0 /* single prec floating point */ +#define XCHAL_HAVE_FP_DIV 0 /* FP with DIV instructions */ +#define XCHAL_HAVE_FP_RECIP 0 /* FP with RECIP instructions */ +#define XCHAL_HAVE_FP_SQRT 0 /* FP with SQRT instructions */ +#define XCHAL_HAVE_FP_RSQRT 0 /* FP with RSQRT instructions */ +#define XCHAL_HAVE_DFP 0 /* double precision FP pkg */ +#define XCHAL_HAVE_DFP_DIV 0 /* DFP with DIV instructions */ +#define XCHAL_HAVE_DFP_RECIP 0 /* DFP with RECIP instructions*/ +#define XCHAL_HAVE_DFP_SQRT 0 /* DFP with SQRT instructions */ +#define XCHAL_HAVE_DFP_RSQRT 0 /* DFP with RSQRT instructions*/ +#define XCHAL_HAVE_DFP_ACCEL 0 /* double precision FP acceleration pkg */ +#define XCHAL_HAVE_DFP_accel XCHAL_HAVE_DFP_ACCEL /* for backward compatibility */ + +#define XCHAL_HAVE_DFPU_SINGLE_ONLY 0 /* DFPU Coprocessor, single precision only */ +#define XCHAL_HAVE_DFPU_SINGLE_DOUBLE 0 /* DFPU Coprocessor, single and double precision */ +#define XCHAL_HAVE_VECTRA1 0 /* Vectra I pkg */ +#define XCHAL_HAVE_VECTRALX 0 /* Vectra LX pkg */ +#define XCHAL_HAVE_PDX4 0 /* PDX4 */ +#define XCHAL_HAVE_CONNXD2 0 /* ConnX D2 pkg */ +#define XCHAL_HAVE_CONNXD2_DUALLSFLIX 0 /* ConnX D2 & Dual LoadStore Flix */ +#define XCHAL_HAVE_BBE16 0 /* ConnX BBE16 pkg */ +#define XCHAL_HAVE_BBE16_RSQRT 0 /* BBE16 & vector recip sqrt */ +#define XCHAL_HAVE_BBE16_VECDIV 0 /* BBE16 & vector divide */ +#define XCHAL_HAVE_BBE16_DESPREAD 0 /* BBE16 & despread */ +#define XCHAL_HAVE_BBENEP 0 /* ConnX BBENEP pkgs */ +#define XCHAL_HAVE_BSP3 0 /* ConnX BSP3 pkg */ +#define XCHAL_HAVE_BSP3_TRANSPOSE 0 /* BSP3 & transpose32x32 */ +#define XCHAL_HAVE_SSP16 0 /* ConnX SSP16 pkg */ +#define XCHAL_HAVE_SSP16_VITERBI 0 /* SSP16 & viterbi */ +#define XCHAL_HAVE_TURBO16 0 /* ConnX Turbo16 pkg */ +#define XCHAL_HAVE_BBP16 0 /* ConnX BBP16 pkg */ +#define XCHAL_HAVE_FLIX3 0 /* basic 3-way FLIX option */ +#define XCHAL_HAVE_GRIVPEP 0 /* GRIVPEP is General Release of IVPEP */ +#define XCHAL_HAVE_GRIVPEP_HISTOGRAM 0 /* Histogram option on GRIVPEP */ + + +/*---------------------------------------------------------------------- + MISC + ----------------------------------------------------------------------*/ + +#define XCHAL_NUM_LOADSTORE_UNITS 1 /* load/store units */ +#define XCHAL_NUM_WRITEBUFFER_ENTRIES 8 /* size of write buffer */ +#define XCHAL_INST_FETCH_WIDTH 4 /* instr-fetch width in bytes */ +#define XCHAL_DATA_WIDTH 4 /* data width in bytes */ +#define XCHAL_DATA_PIPE_DELAY 1 /* d-side pipeline delay + (1 = 5-stage, 2 = 7-stage) */ +#define XCHAL_CLOCK_GATING_GLOBAL 0 /* global clock gating */ +#define XCHAL_CLOCK_GATING_FUNCUNIT 0 /* funct. unit clock gating */ +/* In T1050, applies to selected core load and store instructions (see ISA): */ +#define XCHAL_UNALIGNED_LOAD_EXCEPTION 1 /* unaligned loads cause exc. */ +#define XCHAL_UNALIGNED_STORE_EXCEPTION 1 /* unaligned stores cause exc.*/ +#define XCHAL_UNALIGNED_LOAD_HW 0 /* unaligned loads work in hw */ +#define XCHAL_UNALIGNED_STORE_HW 0 /* unaligned stores work in hw*/ + +#define XCHAL_SW_VERSION 1100002 /* sw version of this header */ + +#define XCHAL_CORE_ID "de212" /* alphanum core name + (CoreID) set in the Xtensa + Processor Generator */ + +#define XCHAL_BUILD_UNIQUE_ID 0x0005A985 /* 22-bit sw build ID */ + +/* + * These definitions describe the hardware targeted by this software. + */ +#define XCHAL_HW_CONFIGID0 0xC283DFFE /* ConfigID hi 32 bits*/ +#define XCHAL_HW_CONFIGID1 0x1C85A985 /* ConfigID lo 32 bits*/ +#define XCHAL_HW_VERSION_NAME "LX6.0.2" /* full version name */ +#define XCHAL_HW_VERSION_MAJOR 2600 /* major ver# of targeted hw */ +#define XCHAL_HW_VERSION_MINOR 2 /* minor ver# of targeted hw */ +#define XCHAL_HW_VERSION 260002 /* major*100+minor */ +#define XCHAL_HW_REL_LX6 1 +#define XCHAL_HW_REL_LX6_0 1 +#define XCHAL_HW_REL_LX6_0_2 1 +#define XCHAL_HW_CONFIGID_RELIABLE 1 +/* If software targets a *range* of hardware versions, these are the bounds: */ +#define XCHAL_HW_MIN_VERSION_MAJOR 2600 /* major v of earliest tgt hw */ +#define XCHAL_HW_MIN_VERSION_MINOR 2 /* minor v of earliest tgt hw */ +#define XCHAL_HW_MIN_VERSION 260002 /* earliest targeted hw */ +#define XCHAL_HW_MAX_VERSION_MAJOR 2600 /* major v of latest tgt hw */ +#define XCHAL_HW_MAX_VERSION_MINOR 2 /* minor v of latest tgt hw */ +#define XCHAL_HW_MAX_VERSION 260002 /* latest targeted hw */ + + +/*---------------------------------------------------------------------- + CACHE + ----------------------------------------------------------------------*/ + +#define XCHAL_ICACHE_LINESIZE 32 /* I-cache line size in bytes */ +#define XCHAL_DCACHE_LINESIZE 32 /* D-cache line size in bytes */ +#define XCHAL_ICACHE_LINEWIDTH 5 /* log2(I line size in bytes) */ +#define XCHAL_DCACHE_LINEWIDTH 5 /* log2(D line size in bytes) */ + +#define XCHAL_ICACHE_SIZE 8192 /* I-cache size in bytes or 0 */ +#define XCHAL_DCACHE_SIZE 8192 /* D-cache size in bytes or 0 */ + +#define XCHAL_DCACHE_IS_WRITEBACK 1 /* writeback feature */ +#define XCHAL_DCACHE_IS_COHERENT 0 /* MP coherence feature */ + +#define XCHAL_HAVE_PREFETCH 0 /* PREFCTL register */ +#define XCHAL_HAVE_PREFETCH_L1 0 /* prefetch to L1 dcache */ +#define XCHAL_PREFETCH_CASTOUT_LINES 0 /* dcache pref. castout bufsz */ +#define XCHAL_PREFETCH_ENTRIES 0 /* cache prefetch entries */ +#define XCHAL_PREFETCH_BLOCK_ENTRIES 0 /* prefetch block streams */ +#define XCHAL_HAVE_CACHE_BLOCKOPS 0 /* block prefetch for caches */ +#define XCHAL_HAVE_ICACHE_TEST 1 /* Icache test instructions */ +#define XCHAL_HAVE_DCACHE_TEST 1 /* Dcache test instructions */ +#define XCHAL_HAVE_ICACHE_DYN_WAYS 0 /* Icache dynamic way support */ +#define XCHAL_HAVE_DCACHE_DYN_WAYS 0 /* Dcache dynamic way support */ + + + + +/**************************************************************************** + Parameters Useful for PRIVILEGED (Supervisory or Non-Virtualized) Code + ****************************************************************************/ + + +#ifndef XTENSA_HAL_NON_PRIVILEGED_ONLY + +/*---------------------------------------------------------------------- + CACHE + ----------------------------------------------------------------------*/ + +#define XCHAL_HAVE_PIF 1 /* any outbound PIF present */ + +/* If present, cache size in bytes == (ways * 2^(linewidth + setwidth)). */ + +/* Number of cache sets in log2(lines per way): */ +#define XCHAL_ICACHE_SETWIDTH 7 +#define XCHAL_DCACHE_SETWIDTH 7 + +/* Cache set associativity (number of ways): */ +#define XCHAL_ICACHE_WAYS 2 +#define XCHAL_DCACHE_WAYS 2 + +/* Cache features: */ +#define XCHAL_ICACHE_LINE_LOCKABLE 1 +#define XCHAL_DCACHE_LINE_LOCKABLE 1 +#define XCHAL_ICACHE_ECC_PARITY 0 +#define XCHAL_DCACHE_ECC_PARITY 0 + +/* Cache access size in bytes (affects operation of SICW instruction): */ +#define XCHAL_ICACHE_ACCESS_SIZE 4 +#define XCHAL_DCACHE_ACCESS_SIZE 4 + +#define XCHAL_DCACHE_BANKS 1 /* number of banks */ + +/* Number of encoded cache attr bits (see <xtensa/hal.h> for decoded bits): */ +#define XCHAL_CA_BITS 4 + +/* Whether MEMCTL register has anything useful */ +#define XCHAL_USE_MEMCTL (((XCHAL_LOOP_BUFFER_SIZE > 0) || \ + XCHAL_DCACHE_IS_COHERENT || \ + XCHAL_HAVE_ICACHE_DYN_WAYS || \ + XCHAL_HAVE_DCACHE_DYN_WAYS) && \ + (XCHAL_HW_MIN_VERSION >= XTENSA_HWVERSION_RE_2012_0)) + + +/*---------------------------------------------------------------------- + INTERNAL I/D RAM/ROMs and XLMI + ----------------------------------------------------------------------*/ + +#define XCHAL_NUM_INSTROM 0 /* number of core instr. ROMs */ +#define XCHAL_NUM_INSTRAM 1 /* number of core instr. RAMs */ +#define XCHAL_NUM_DATAROM 0 /* number of core data ROMs */ +#define XCHAL_NUM_DATARAM 1 /* number of core data RAMs */ +#define XCHAL_NUM_URAM 0 /* number of core unified RAMs*/ +#define XCHAL_NUM_XLMI 1 /* number of core XLMI ports */ + +/* Instruction RAM 0: */ +#define XCHAL_INSTRAM0_VADDR 0x40000000 /* virtual address */ +#define XCHAL_INSTRAM0_PADDR 0x40000000 /* physical address */ +#define XCHAL_INSTRAM0_SIZE 131072 /* size in bytes */ +#define XCHAL_INSTRAM0_ECC_PARITY 0 /* ECC/parity type, 0=none */ + +/* Data RAM 0: */ +#define XCHAL_DATARAM0_VADDR 0x3FFE0000 /* virtual address */ +#define XCHAL_DATARAM0_PADDR 0x3FFE0000 /* physical address */ +#define XCHAL_DATARAM0_SIZE 131072 /* size in bytes */ +#define XCHAL_DATARAM0_ECC_PARITY 0 /* ECC/parity type, 0=none */ +#define XCHAL_DATARAM0_BANKS 1 /* number of banks */ + +/* XLMI Port 0: */ +#define XCHAL_XLMI0_VADDR 0x3FFC0000 /* virtual address */ +#define XCHAL_XLMI0_PADDR 0x3FFC0000 /* physical address */ +#define XCHAL_XLMI0_SIZE 131072 /* size in bytes */ +#define XCHAL_XLMI0_ECC_PARITY 0 /* ECC/parity type, 0=none */ + +#define XCHAL_HAVE_IMEM_LOADSTORE 1 /* can load/store to IROM/IRAM*/ + + +/*---------------------------------------------------------------------- + INTERRUPTS and TIMERS + ----------------------------------------------------------------------*/ + +#define XCHAL_HAVE_INTERRUPTS 1 /* interrupt option */ +#define XCHAL_HAVE_HIGHPRI_INTERRUPTS 1 /* med/high-pri. interrupts */ +#define XCHAL_HAVE_NMI 1 /* non-maskable interrupt */ +#define XCHAL_HAVE_CCOUNT 1 /* CCOUNT reg. (timer option) */ +#define XCHAL_NUM_TIMERS 3 /* number of CCOMPAREn regs */ +#define XCHAL_NUM_INTERRUPTS 22 /* number of interrupts */ +#define XCHAL_NUM_INTERRUPTS_LOG2 5 /* ceil(log2(NUM_INTERRUPTS)) */ +#define XCHAL_NUM_EXTINTERRUPTS 17 /* num of external interrupts */ +#define XCHAL_NUM_INTLEVELS 6 /* number of interrupt levels + (not including level zero) */ +#define XCHAL_EXCM_LEVEL 3 /* level masked by PS.EXCM */ + /* (always 1 in XEA1; levels 2 .. EXCM_LEVEL are "medium priority") */ + +/* Masks of interrupts at each interrupt level: */ +#define XCHAL_INTLEVEL1_MASK 0x001F80FF +#define XCHAL_INTLEVEL2_MASK 0x00000100 +#define XCHAL_INTLEVEL3_MASK 0x00200E00 +#define XCHAL_INTLEVEL4_MASK 0x00001000 +#define XCHAL_INTLEVEL5_MASK 0x00002000 +#define XCHAL_INTLEVEL6_MASK 0x00000000 +#define XCHAL_INTLEVEL7_MASK 0x00004000 + +/* Masks of interrupts at each range 1..n of interrupt levels: */ +#define XCHAL_INTLEVEL1_ANDBELOW_MASK 0x001F80FF +#define XCHAL_INTLEVEL2_ANDBELOW_MASK 0x001F81FF +#define XCHAL_INTLEVEL3_ANDBELOW_MASK 0x003F8FFF +#define XCHAL_INTLEVEL4_ANDBELOW_MASK 0x003F9FFF +#define XCHAL_INTLEVEL5_ANDBELOW_MASK 0x003FBFFF +#define XCHAL_INTLEVEL6_ANDBELOW_MASK 0x003FBFFF +#define XCHAL_INTLEVEL7_ANDBELOW_MASK 0x003FFFFF + +/* Level of each interrupt: */ +#define XCHAL_INT0_LEVEL 1 +#define XCHAL_INT1_LEVEL 1 +#define XCHAL_INT2_LEVEL 1 +#define XCHAL_INT3_LEVEL 1 +#define XCHAL_INT4_LEVEL 1 +#define XCHAL_INT5_LEVEL 1 +#define XCHAL_INT6_LEVEL 1 +#define XCHAL_INT7_LEVEL 1 +#define XCHAL_INT8_LEVEL 2 +#define XCHAL_INT9_LEVEL 3 +#define XCHAL_INT10_LEVEL 3 +#define XCHAL_INT11_LEVEL 3 +#define XCHAL_INT12_LEVEL 4 +#define XCHAL_INT13_LEVEL 5 +#define XCHAL_INT14_LEVEL 7 +#define XCHAL_INT15_LEVEL 1 +#define XCHAL_INT16_LEVEL 1 +#define XCHAL_INT17_LEVEL 1 +#define XCHAL_INT18_LEVEL 1 +#define XCHAL_INT19_LEVEL 1 +#define XCHAL_INT20_LEVEL 1 +#define XCHAL_INT21_LEVEL 3 +#define XCHAL_DEBUGLEVEL 6 /* debug interrupt level */ +#define XCHAL_HAVE_DEBUG_EXTERN_INT 1 /* OCD external db interrupt */ +#define XCHAL_NMILEVEL 7 /* NMI "level" (for use with + EXCSAVE/EPS/EPC_n, RFI n) */ + +/* Type of each interrupt: */ +#define XCHAL_INT0_TYPE XTHAL_INTTYPE_EXTERN_LEVEL +#define XCHAL_INT1_TYPE XTHAL_INTTYPE_EXTERN_LEVEL +#define XCHAL_INT2_TYPE XTHAL_INTTYPE_EXTERN_LEVEL +#define XCHAL_INT3_TYPE XTHAL_INTTYPE_EXTERN_LEVEL +#define XCHAL_INT4_TYPE XTHAL_INTTYPE_EXTERN_LEVEL +#define XCHAL_INT5_TYPE XTHAL_INTTYPE_EXTERN_LEVEL +#define XCHAL_INT6_TYPE XTHAL_INTTYPE_TIMER +#define XCHAL_INT7_TYPE XTHAL_INTTYPE_SOFTWARE +#define XCHAL_INT8_TYPE XTHAL_INTTYPE_EXTERN_LEVEL +#define XCHAL_INT9_TYPE XTHAL_INTTYPE_EXTERN_LEVEL +#define XCHAL_INT10_TYPE XTHAL_INTTYPE_TIMER +#define XCHAL_INT11_TYPE XTHAL_INTTYPE_SOFTWARE +#define XCHAL_INT12_TYPE XTHAL_INTTYPE_EXTERN_LEVEL +#define XCHAL_INT13_TYPE XTHAL_INTTYPE_TIMER +#define XCHAL_INT14_TYPE XTHAL_INTTYPE_NMI +#define XCHAL_INT15_TYPE XTHAL_INTTYPE_EXTERN_EDGE +#define XCHAL_INT16_TYPE XTHAL_INTTYPE_EXTERN_EDGE +#define XCHAL_INT17_TYPE XTHAL_INTTYPE_EXTERN_EDGE +#define XCHAL_INT18_TYPE XTHAL_INTTYPE_EXTERN_EDGE +#define XCHAL_INT19_TYPE XTHAL_INTTYPE_EXTERN_EDGE +#define XCHAL_INT20_TYPE XTHAL_INTTYPE_EXTERN_EDGE +#define XCHAL_INT21_TYPE XTHAL_INTTYPE_EXTERN_EDGE + +/* Masks of interrupts for each type of interrupt: */ +#define XCHAL_INTTYPE_MASK_UNCONFIGURED 0xFFC00000 +#define XCHAL_INTTYPE_MASK_SOFTWARE 0x00000880 +#define XCHAL_INTTYPE_MASK_EXTERN_EDGE 0x003F8000 +#define XCHAL_INTTYPE_MASK_EXTERN_LEVEL 0x0000133F +#define XCHAL_INTTYPE_MASK_TIMER 0x00002440 +#define XCHAL_INTTYPE_MASK_NMI 0x00004000 +#define XCHAL_INTTYPE_MASK_WRITE_ERROR 0x00000000 +#define XCHAL_INTTYPE_MASK_PROFILING 0x00000000 + +/* Interrupt numbers assigned to specific interrupt sources: */ +#define XCHAL_TIMER0_INTERRUPT 6 /* CCOMPARE0 */ +#define XCHAL_TIMER1_INTERRUPT 10 /* CCOMPARE1 */ +#define XCHAL_TIMER2_INTERRUPT 13 /* CCOMPARE2 */ +#define XCHAL_TIMER3_INTERRUPT XTHAL_TIMER_UNCONFIGURED +#define XCHAL_NMI_INTERRUPT 14 /* non-maskable interrupt */ + +/* Interrupt numbers for levels at which only one interrupt is configured: */ +#define XCHAL_INTLEVEL2_NUM 8 +#define XCHAL_INTLEVEL4_NUM 12 +#define XCHAL_INTLEVEL5_NUM 13 +#define XCHAL_INTLEVEL7_NUM 14 +/* (There are many interrupts each at level(s) 1, 3.) */ + + +/* + * External interrupt mapping. + * These macros describe how Xtensa processor interrupt numbers + * (as numbered internally, eg. in INTERRUPT and INTENABLE registers) + * map to external BInterrupt<n> pins, for those interrupts + * configured as external (level-triggered, edge-triggered, or NMI). + * See the Xtensa processor databook for more details. + */ + +/* Core interrupt numbers mapped to each EXTERNAL BInterrupt pin number: */ +#define XCHAL_EXTINT0_NUM 0 /* (intlevel 1) */ +#define XCHAL_EXTINT1_NUM 1 /* (intlevel 1) */ +#define XCHAL_EXTINT2_NUM 2 /* (intlevel 1) */ +#define XCHAL_EXTINT3_NUM 3 /* (intlevel 1) */ +#define XCHAL_EXTINT4_NUM 4 /* (intlevel 1) */ +#define XCHAL_EXTINT5_NUM 5 /* (intlevel 1) */ +#define XCHAL_EXTINT6_NUM 8 /* (intlevel 2) */ +#define XCHAL_EXTINT7_NUM 9 /* (intlevel 3) */ +#define XCHAL_EXTINT8_NUM 12 /* (intlevel 4) */ +#define XCHAL_EXTINT9_NUM 14 /* (intlevel 7) */ +#define XCHAL_EXTINT10_NUM 15 /* (intlevel 1) */ +#define XCHAL_EXTINT11_NUM 16 /* (intlevel 1) */ +#define XCHAL_EXTINT12_NUM 17 /* (intlevel 1) */ +#define XCHAL_EXTINT13_NUM 18 /* (intlevel 1) */ +#define XCHAL_EXTINT14_NUM 19 /* (intlevel 1) */ +#define XCHAL_EXTINT15_NUM 20 /* (intlevel 1) */ +#define XCHAL_EXTINT16_NUM 21 /* (intlevel 3) */ +/* EXTERNAL BInterrupt pin numbers mapped to each core interrupt number: */ +#define XCHAL_INT0_EXTNUM 0 /* (intlevel 1) */ +#define XCHAL_INT1_EXTNUM 1 /* (intlevel 1) */ +#define XCHAL_INT2_EXTNUM 2 /* (intlevel 1) */ +#define XCHAL_INT3_EXTNUM 3 /* (intlevel 1) */ +#define XCHAL_INT4_EXTNUM 4 /* (intlevel 1) */ +#define XCHAL_INT5_EXTNUM 5 /* (intlevel 1) */ +#define XCHAL_INT8_EXTNUM 6 /* (intlevel 2) */ +#define XCHAL_INT9_EXTNUM 7 /* (intlevel 3) */ +#define XCHAL_INT12_EXTNUM 8 /* (intlevel 4) */ +#define XCHAL_INT14_EXTNUM 9 /* (intlevel 7) */ +#define XCHAL_INT15_EXTNUM 10 /* (intlevel 1) */ +#define XCHAL_INT16_EXTNUM 11 /* (intlevel 1) */ +#define XCHAL_INT17_EXTNUM 12 /* (intlevel 1) */ +#define XCHAL_INT18_EXTNUM 13 /* (intlevel 1) */ +#define XCHAL_INT19_EXTNUM 14 /* (intlevel 1) */ +#define XCHAL_INT20_EXTNUM 15 /* (intlevel 1) */ +#define XCHAL_INT21_EXTNUM 16 /* (intlevel 3) */ + + +/*---------------------------------------------------------------------- + EXCEPTIONS and VECTORS + ----------------------------------------------------------------------*/ + +#define XCHAL_XEA_VERSION 2 /* Xtensa Exception Architecture + number: 1 == XEA1 (old) + 2 == XEA2 (new) + 0 == XEAX (extern) or TX */ +#define XCHAL_HAVE_XEA1 0 /* Exception Architecture 1 */ +#define XCHAL_HAVE_XEA2 1 /* Exception Architecture 2 */ +#define XCHAL_HAVE_XEAX 0 /* External Exception Arch. */ +#define XCHAL_HAVE_EXCEPTIONS 1 /* exception option */ +#define XCHAL_HAVE_HALT 0 /* halt architecture option */ +#define XCHAL_HAVE_BOOTLOADER 0 /* boot loader (for TX) */ +#define XCHAL_HAVE_MEM_ECC_PARITY 0 /* local memory ECC/parity */ +#define XCHAL_HAVE_VECTOR_SELECT 1 /* relocatable vectors */ +#define XCHAL_HAVE_VECBASE 1 /* relocatable vectors */ +#define XCHAL_VECBASE_RESET_VADDR 0x60000000 /* VECBASE reset value */ +#define XCHAL_VECBASE_RESET_PADDR 0x60000000 +#define XCHAL_RESET_VECBASE_OVERLAP 0 + +#define XCHAL_RESET_VECTOR0_VADDR 0x50000000 +#define XCHAL_RESET_VECTOR0_PADDR 0x50000000 +#define XCHAL_RESET_VECTOR1_VADDR 0x40000400 +#define XCHAL_RESET_VECTOR1_PADDR 0x40000400 +#define XCHAL_RESET_VECTOR_VADDR 0x50000000 +#define XCHAL_RESET_VECTOR_PADDR 0x50000000 +#define XCHAL_USER_VECOFS 0x00000340 +#define XCHAL_USER_VECTOR_VADDR 0x60000340 +#define XCHAL_USER_VECTOR_PADDR 0x60000340 +#define XCHAL_KERNEL_VECOFS 0x00000300 +#define XCHAL_KERNEL_VECTOR_VADDR 0x60000300 +#define XCHAL_KERNEL_VECTOR_PADDR 0x60000300 +#define XCHAL_DOUBLEEXC_VECOFS 0x000003C0 +#define XCHAL_DOUBLEEXC_VECTOR_VADDR 0x600003C0 +#define XCHAL_DOUBLEEXC_VECTOR_PADDR 0x600003C0 +#define XCHAL_WINDOW_OF4_VECOFS 0x00000000 +#define XCHAL_WINDOW_UF4_VECOFS 0x00000040 +#define XCHAL_WINDOW_OF8_VECOFS 0x00000080 +#define XCHAL_WINDOW_UF8_VECOFS 0x000000C0 +#define XCHAL_WINDOW_OF12_VECOFS 0x00000100 +#define XCHAL_WINDOW_UF12_VECOFS 0x00000140 +#define XCHAL_WINDOW_VECTORS_VADDR 0x60000000 +#define XCHAL_WINDOW_VECTORS_PADDR 0x60000000 +#define XCHAL_INTLEVEL2_VECOFS 0x00000180 +#define XCHAL_INTLEVEL2_VECTOR_VADDR 0x60000180 +#define XCHAL_INTLEVEL2_VECTOR_PADDR 0x60000180 +#define XCHAL_INTLEVEL3_VECOFS 0x000001C0 +#define XCHAL_INTLEVEL3_VECTOR_VADDR 0x600001C0 +#define XCHAL_INTLEVEL3_VECTOR_PADDR 0x600001C0 +#define XCHAL_INTLEVEL4_VECOFS 0x00000200 +#define XCHAL_INTLEVEL4_VECTOR_VADDR 0x60000200 +#define XCHAL_INTLEVEL4_VECTOR_PADDR 0x60000200 +#define XCHAL_INTLEVEL5_VECOFS 0x00000240 +#define XCHAL_INTLEVEL5_VECTOR_VADDR 0x60000240 +#define XCHAL_INTLEVEL5_VECTOR_PADDR 0x60000240 +#define XCHAL_INTLEVEL6_VECOFS 0x00000280 +#define XCHAL_INTLEVEL6_VECTOR_VADDR 0x60000280 +#define XCHAL_INTLEVEL6_VECTOR_PADDR 0x60000280 +#define XCHAL_DEBUG_VECOFS XCHAL_INTLEVEL6_VECOFS +#define XCHAL_DEBUG_VECTOR_VADDR XCHAL_INTLEVEL6_VECTOR_VADDR +#define XCHAL_DEBUG_VECTOR_PADDR XCHAL_INTLEVEL6_VECTOR_PADDR +#define XCHAL_NMI_VECOFS 0x000002C0 +#define XCHAL_NMI_VECTOR_VADDR 0x600002C0 +#define XCHAL_NMI_VECTOR_PADDR 0x600002C0 +#define XCHAL_INTLEVEL7_VECOFS XCHAL_NMI_VECOFS +#define XCHAL_INTLEVEL7_VECTOR_VADDR XCHAL_NMI_VECTOR_VADDR +#define XCHAL_INTLEVEL7_VECTOR_PADDR XCHAL_NMI_VECTOR_PADDR + + +/*---------------------------------------------------------------------- + DEBUG MODULE + ----------------------------------------------------------------------*/ + +/* Misc */ +#define XCHAL_HAVE_DEBUG_ERI 1 /* ERI to debug module */ +#define XCHAL_HAVE_DEBUG_APB 0 /* APB to debug module */ +#define XCHAL_HAVE_DEBUG_JTAG 1 /* JTAG to debug module */ + +/* On-Chip Debug (OCD) */ +#define XCHAL_HAVE_OCD 1 /* OnChipDebug option */ +#define XCHAL_NUM_IBREAK 2 /* number of IBREAKn regs */ +#define XCHAL_NUM_DBREAK 2 /* number of DBREAKn regs */ +#define XCHAL_HAVE_OCD_DIR_ARRAY 0 /* faster OCD option (to LX4) */ +#define XCHAL_HAVE_OCD_LS32DDR 1 /* L32DDR/S32DDR (faster OCD) */ + +/* TRAX (in core) */ +#define XCHAL_HAVE_TRAX 1 /* TRAX in debug module */ +#define XCHAL_TRAX_MEM_SIZE 262144 /* TRAX memory size in bytes */ +#define XCHAL_TRAX_MEM_SHAREABLE 0 /* start/end regs; ready sig. */ +#define XCHAL_TRAX_ATB_WIDTH 0 /* ATB width (bits), 0=no ATB */ +#define XCHAL_TRAX_TIME_WIDTH 0 /* timestamp bitwidth, 0=none */ + +/* Perf counters */ +#define XCHAL_NUM_PERF_COUNTERS 0 /* performance counters */ + + +/*---------------------------------------------------------------------- + MMU + ----------------------------------------------------------------------*/ + +/* See core-matmap.h header file for more details. */ + +#define XCHAL_HAVE_TLBS 1 /* inverse of HAVE_CACHEATTR */ +#define XCHAL_HAVE_SPANNING_WAY 1 /* one way maps I+D 4GB vaddr */ +#define XCHAL_SPANNING_WAY 0 /* TLB spanning way number */ +#define XCHAL_HAVE_IDENTITY_MAP 1 /* vaddr == paddr always */ +#define XCHAL_HAVE_CACHEATTR 0 /* CACHEATTR register present */ +#define XCHAL_HAVE_MIMIC_CACHEATTR 1 /* region protection */ +#define XCHAL_HAVE_XLT_CACHEATTR 0 /* region prot. w/translation */ +#define XCHAL_HAVE_PTP_MMU 0 /* full MMU (with page table + [autorefill] and protection) + usable for an MMU-based OS */ +/* If none of the above last 4 are set, it's a custom TLB configuration. */ + +#define XCHAL_MMU_ASID_BITS 0 /* number of bits in ASIDs */ +#define XCHAL_MMU_RINGS 1 /* number of rings (1..4) */ +#define XCHAL_MMU_RING_BITS 0 /* num of bits in RING field */ + +#endif /* !XTENSA_HAL_NON_PRIVILEGED_ONLY */ + + +#endif /* _XTENSA_CORE_CONFIGURATION_H */ + diff --git a/arch/xtensa/variants/de212/include/variant/tie-asm.h b/arch/xtensa/variants/de212/include/variant/tie-asm.h new file mode 100644 index 000000000..77755354f --- /dev/null +++ b/arch/xtensa/variants/de212/include/variant/tie-asm.h @@ -0,0 +1,170 @@ +/* + * tie-asm.h -- compile-time HAL assembler definitions dependent on CORE & TIE + * + * NOTE: This header file is not meant to be included directly. + */ + +/* This header file contains assembly-language definitions (assembly + macros, etc.) for this specific Xtensa processor's TIE extensions + and options. It is customized to this Xtensa processor configuration. + + Copyright (c) 1999-2015 Cadence Design Systems Inc. + + Permission is hereby granted, free of charge, to any person obtaining + a copy of this software and associated documentation files (the + "Software"), to deal in the Software without restriction, including + without limitation the rights to use, copy, modify, merge, publish, + distribute, sublicense, and/or sell copies of the Software, and to + permit persons to whom the Software is furnished to do so, subject to + the following conditions: + + The above copyright notice and this permission notice shall be included + in all copies or substantial portions of the Software. + + THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF + MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. + IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY + CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, + TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE + SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE. */ + +#ifndef _XTENSA_CORE_TIE_ASM_H +#define _XTENSA_CORE_TIE_ASM_H + +/* Selection parameter values for save-area save/restore macros: */ +/* Option vs. TIE: */ +#define XTHAL_SAS_TIE 0x0001 /* custom extension or coprocessor */ +#define XTHAL_SAS_OPT 0x0002 /* optional (and not a coprocessor) */ +#define XTHAL_SAS_ANYOT 0x0003 /* both of the above */ +/* Whether used automatically by compiler: */ +#define XTHAL_SAS_NOCC 0x0004 /* not used by compiler w/o special opts/code */ +#define XTHAL_SAS_CC 0x0008 /* used by compiler without special opts/code */ +#define XTHAL_SAS_ANYCC 0x000C /* both of the above */ +/* ABI handling across function calls: */ +#define XTHAL_SAS_CALR 0x0010 /* caller-saved */ +#define XTHAL_SAS_CALE 0x0020 /* callee-saved */ +#define XTHAL_SAS_GLOB 0x0040 /* global across function calls (in thread) */ +#define XTHAL_SAS_ANYABI 0x0070 /* all of the above three */ +/* Misc */ +#define XTHAL_SAS_ALL 0xFFFF /* include all default NCP contents */ +#define XTHAL_SAS3(optie,ccuse,abi) ( ((optie) & XTHAL_SAS_ANYOT) \ + | ((ccuse) & XTHAL_SAS_ANYCC) \ + | ((abi) & XTHAL_SAS_ANYABI) ) + + + /* + * Macro to store all non-coprocessor (extra) custom TIE and optional state + * (not including zero-overhead loop registers). + * Required parameters: + * ptr Save area pointer address register (clobbered) + * (register must contain a 4 byte aligned address). + * at1..at4 Four temporary address registers (first XCHAL_NCP_NUM_ATMPS + * registers are clobbered, the remaining are unused). + * Optional parameters: + * continue If macro invoked as part of a larger store sequence, set to 1 + * if this is not the first in the sequence. Defaults to 0. + * ofs Offset from start of larger sequence (from value of first ptr + * in sequence) at which to store. Defaults to next available space + * (or 0 if <continue> is 0). + * select Select what category(ies) of registers to store, as a bitmask + * (see XTHAL_SAS_xxx constants). Defaults to all registers. + * alloc Select what category(ies) of registers to allocate; if any + * category is selected here that is not in <select>, space for + * the corresponding registers is skipped without doing any store. + */ + .macro xchal_ncp_store ptr at1 at2 at3 at4 continue=0 ofs=-1 select=XTHAL_SAS_ALL alloc=0 + xchal_sa_start \continue, \ofs + // Optional caller-saved registers used by default by the compiler: + .ifeq (XTHAL_SAS_OPT | XTHAL_SAS_CC | XTHAL_SAS_CALR) & ~(\select) + xchal_sa_align \ptr, 0, 1016, 4, 4 + rsr.ACCLO \at1 // MAC16 option + s32i \at1, \ptr, .Lxchal_ofs_+0 + rsr.ACCHI \at1 // MAC16 option + s32i \at1, \ptr, .Lxchal_ofs_+4 + .set .Lxchal_ofs_, .Lxchal_ofs_ + 8 + .elseif ((XTHAL_SAS_OPT | XTHAL_SAS_CC | XTHAL_SAS_CALR) & ~(\alloc)) == 0 + xchal_sa_align \ptr, 0, 1016, 4, 4 + .set .Lxchal_ofs_, .Lxchal_ofs_ + 8 + .endif + // Optional caller-saved registers not used by default by the compiler: + .ifeq (XTHAL_SAS_OPT | XTHAL_SAS_NOCC | XTHAL_SAS_CALR) & ~(\select) + xchal_sa_align \ptr, 0, 1004, 4, 4 + rsr.SCOMPARE1 \at1 // conditional store option + s32i \at1, \ptr, .Lxchal_ofs_+0 + rsr.M0 \at1 // MAC16 option + s32i \at1, \ptr, .Lxchal_ofs_+4 + rsr.M1 \at1 // MAC16 option + s32i \at1, \ptr, .Lxchal_ofs_+8 + rsr.M2 \at1 // MAC16 option + s32i \at1, \ptr, .Lxchal_ofs_+12 + rsr.M3 \at1 // MAC16 option + s32i \at1, \ptr, .Lxchal_ofs_+16 + .set .Lxchal_ofs_, .Lxchal_ofs_ + 20 + .elseif ((XTHAL_SAS_OPT | XTHAL_SAS_NOCC | XTHAL_SAS_CALR) & ~(\alloc)) == 0 + xchal_sa_align \ptr, 0, 1004, 4, 4 + .set .Lxchal_ofs_, .Lxchal_ofs_ + 20 + .endif + .endm // xchal_ncp_store + + /* + * Macro to load all non-coprocessor (extra) custom TIE and optional state + * (not including zero-overhead loop registers). + * Required parameters: + * ptr Save area pointer address register (clobbered) + * (register must contain a 4 byte aligned address). + * at1..at4 Four temporary address registers (first XCHAL_NCP_NUM_ATMPS + * registers are clobbered, the remaining are unused). + * Optional parameters: + * continue If macro invoked as part of a larger load sequence, set to 1 + * if this is not the first in the sequence. Defaults to 0. + * ofs Offset from start of larger sequence (from value of first ptr + * in sequence) at which to load. Defaults to next available space + * (or 0 if <continue> is 0). + * select Select what category(ies) of registers to load, as a bitmask + * (see XTHAL_SAS_xxx constants). Defaults to all registers. + * alloc Select what category(ies) of registers to allocate; if any + * category is selected here that is not in <select>, space for + * the corresponding registers is skipped without doing any load. + */ + .macro xchal_ncp_load ptr at1 at2 at3 at4 continue=0 ofs=-1 select=XTHAL_SAS_ALL alloc=0 + xchal_sa_start \continue, \ofs + // Optional caller-saved registers used by default by the compiler: + .ifeq (XTHAL_SAS_OPT | XTHAL_SAS_CC | XTHAL_SAS_CALR) & ~(\select) + xchal_sa_align \ptr, 0, 1016, 4, 4 + l32i \at1, \ptr, .Lxchal_ofs_+0 + wsr.ACCLO \at1 // MAC16 option + l32i \at1, \ptr, .Lxchal_ofs_+4 + wsr.ACCHI \at1 // MAC16 option + .set .Lxchal_ofs_, .Lxchal_ofs_ + 8 + .elseif ((XTHAL_SAS_OPT | XTHAL_SAS_CC | XTHAL_SAS_CALR) & ~(\alloc)) == 0 + xchal_sa_align \ptr, 0, 1016, 4, 4 + .set .Lxchal_ofs_, .Lxchal_ofs_ + 8 + .endif + // Optional caller-saved registers not used by default by the compiler: + .ifeq (XTHAL_SAS_OPT | XTHAL_SAS_NOCC | XTHAL_SAS_CALR) & ~(\select) + xchal_sa_align \ptr, 0, 1004, 4, 4 + l32i \at1, \ptr, .Lxchal_ofs_+0 + wsr.SCOMPARE1 \at1 // conditional store option + l32i \at1, \ptr, .Lxchal_ofs_+4 + wsr.M0 \at1 // MAC16 option + l32i \at1, \ptr, .Lxchal_ofs_+8 + wsr.M1 \at1 // MAC16 option + l32i \at1, \ptr, .Lxchal_ofs_+12 + wsr.M2 \at1 // MAC16 option + l32i \at1, \ptr, .Lxchal_ofs_+16 + wsr.M3 \at1 // MAC16 option + .set .Lxchal_ofs_, .Lxchal_ofs_ + 20 + .elseif ((XTHAL_SAS_OPT | XTHAL_SAS_NOCC | XTHAL_SAS_CALR) & ~(\alloc)) == 0 + xchal_sa_align \ptr, 0, 1004, 4, 4 + .set .Lxchal_ofs_, .Lxchal_ofs_ + 20 + .endif + .endm // xchal_ncp_load + + +#define XCHAL_NCP_NUM_ATMPS 1 + +#define XCHAL_SA_NUM_ATMPS 1 + +#endif /*_XTENSA_CORE_TIE_ASM_H*/ + diff --git a/arch/xtensa/variants/de212/include/variant/tie.h b/arch/xtensa/variants/de212/include/variant/tie.h new file mode 100644 index 000000000..b8a061a3f --- /dev/null +++ b/arch/xtensa/variants/de212/include/variant/tie.h @@ -0,0 +1,136 @@ +/* + * tie.h -- compile-time HAL definitions dependent on CORE & TIE configuration + * + * NOTE: This header file is not meant to be included directly. + */ + +/* This header file describes this specific Xtensa processor's TIE extensions + that extend basic Xtensa core functionality. It is customized to this + Xtensa processor configuration. + + Copyright (c) 1999-2015 Cadence Design Systems Inc. + + Permission is hereby granted, free of charge, to any person obtaining + a copy of this software and associated documentation files (the + "Software"), to deal in the Software without restriction, including + without limitation the rights to use, copy, modify, merge, publish, + distribute, sublicense, and/or sell copies of the Software, and to + permit persons to whom the Software is furnished to do so, subject to + the following conditions: + + The above copyright notice and this permission notice shall be included + in all copies or substantial portions of the Software. + + THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF + MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. + IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY + CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, + TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE + SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE. */ + +#ifndef _XTENSA_CORE_TIE_H +#define _XTENSA_CORE_TIE_H + +#define XCHAL_CP_NUM 0 /* number of coprocessors */ +#define XCHAL_CP_MAX 0 /* max CP ID + 1 (0 if none) */ +#define XCHAL_CP_MASK 0x00 /* bitmask of all CPs by ID */ +#define XCHAL_CP_PORT_MASK 0x00 /* bitmask of only port CPs */ + +/* Save area for non-coprocessor optional and custom (TIE) state: */ +#define XCHAL_NCP_SA_SIZE 28 +#define XCHAL_NCP_SA_ALIGN 4 + +/* Total save area for optional and custom state (NCP + CPn): */ +#define XCHAL_TOTAL_SA_SIZE 32 /* with 16-byte align padding */ +#define XCHAL_TOTAL_SA_ALIGN 4 /* actual minimum alignment */ + +/* + * Detailed contents of save areas. + * NOTE: caller must define the XCHAL_SA_REG macro (not defined here) + * before expanding the XCHAL_xxx_SA_LIST() macros. + * + * XCHAL_SA_REG(s,ccused,abikind,kind,opt,name,galign,align,asize, + * dbnum,base,regnum,bitsz,gapsz,reset,x...) + * + * s = passed from XCHAL_*_LIST(s), eg. to select how to expand + * ccused = set if used by compiler without special options or code + * abikind = 0 (caller-saved), 1 (callee-saved), or 2 (thread-global) + * kind = 0 (special reg), 1 (TIE user reg), or 2 (TIE regfile reg) + * opt = 0 (custom TIE extension or coprocessor), or 1 (optional reg) + * name = lowercase reg name (no quotes) + * galign = group byte alignment (power of 2) (galign >= align) + * align = register byte alignment (power of 2) + * asize = allocated size in bytes (asize*8 == bitsz + gapsz + padsz) + * (not including any pad bytes required to galign this or next reg) + * dbnum = unique target number f/debug (see <xtensa-libdb-macros.h>) + * base = reg shortname w/o index (or sr=special, ur=TIE user reg) + * regnum = reg index in regfile, or special/TIE-user reg number + * bitsz = number of significant bits (regfile width, or ur/sr mask bits) + * gapsz = intervening bits, if bitsz bits not stored contiguously + * (padsz = pad bits at end [TIE regfile] or at msbits [ur,sr] of asize) + * reset = register reset value (or 0 if undefined at reset) + * x = reserved for future use (0 until then) + * + * To filter out certain registers, e.g. to expand only the non-global + * registers used by the compiler, you can do something like this: + * + * #define XCHAL_SA_REG(s,ccused,p...) SELCC##ccused(p) + * #define SELCC0(p...) + * #define SELCC1(abikind,p...) SELAK##abikind(p) + * #define SELAK0(p...) REG(p) + * #define SELAK1(p...) REG(p) + * #define SELAK2(p...) + * #define REG(kind,tie,name,galn,aln,asz,csz,dbnum,base,rnum,bsz,rst,x...) \ + * ...what you want to expand... + */ + +#define XCHAL_NCP_SA_NUM 7 +#define XCHAL_NCP_SA_LIST(s) \ + XCHAL_SA_REG(s,1,0,0,1, acclo, 4, 4, 4,0x0210, sr,16 , 32,0,0,0) \ + XCHAL_SA_REG(s,1,0,0,1, acchi, 4, 4, 4,0x0211, sr,17 , 8,0,0,0) \ + XCHAL_SA_REG(s,0,0,0,1, scompare1, 4, 4, 4,0x020C, sr,12 , 32,0,0,0) \ + XCHAL_SA_REG(s,0,0,0,1, m0, 4, 4, 4,0x0220, sr,32 , 32,0,0,0) \ + XCHAL_SA_REG(s,0,0,0,1, m1, 4, 4, 4,0x0221, sr,33 , 32,0,0,0) \ + XCHAL_SA_REG(s,0,0,0,1, m2, 4, 4, 4,0x0222, sr,34 , 32,0,0,0) \ + XCHAL_SA_REG(s,0,0,0,1, m3, 4, 4, 4,0x0223, sr,35 , 32,0,0,0) + +#define XCHAL_CP0_SA_NUM 0 +#define XCHAL_CP0_SA_LIST(s) /* empty */ + +#define XCHAL_CP1_SA_NUM 0 +#define XCHAL_CP1_SA_LIST(s) /* empty */ + +#define XCHAL_CP2_SA_NUM 0 +#define XCHAL_CP2_SA_LIST(s) /* empty */ + +#define XCHAL_CP3_SA_NUM 0 +#define XCHAL_CP3_SA_LIST(s) /* empty */ + +#define XCHAL_CP4_SA_NUM 0 +#define XCHAL_CP4_SA_LIST(s) /* empty */ + +#define XCHAL_CP5_SA_NUM 0 +#define XCHAL_CP5_SA_LIST(s) /* empty */ + +#define XCHAL_CP6_SA_NUM 0 +#define XCHAL_CP6_SA_LIST(s) /* empty */ + +#define XCHAL_CP7_SA_NUM 0 +#define XCHAL_CP7_SA_LIST(s) /* empty */ + +/* Byte length of instruction from its first nibble (op0 field), per FLIX. */ +#define XCHAL_OP0_FORMAT_LENGTHS 3,3,3,3,3,3,3,3,2,2,2,2,2,2,3,3 +/* Byte length of instruction from its first byte, per FLIX. */ +#define XCHAL_BYTE0_FORMAT_LENGTHS \ + 3,3,3,3,3,3,3,3,2,2,2,2,2,2,3,3, 3,3,3,3,3,3,3,3,2,2,2,2,2,2,3,3,\ + 3,3,3,3,3,3,3,3,2,2,2,2,2,2,3,3, 3,3,3,3,3,3,3,3,2,2,2,2,2,2,3,3,\ + 3,3,3,3,3,3,3,3,2,2,2,2,2,2,3,3, 3,3,3,3,3,3,3,3,2,2,2,2,2,2,3,3,\ + 3,3,3,3,3,3,3,3,2,2,2,2,2,2,3,3, 3,3,3,3,3,3,3,3,2,2,2,2,2,2,3,3,\ + 3,3,3,3,3,3,3,3,2,2,2,2,2,2,3,3, 3,3,3,3,3,3,3,3,2,2,2,2,2,2,3,3,\ + 3,3,3,3,3,3,3,3,2,2,2,2,2,2,3,3, 3,3,3,3,3,3,3,3,2,2,2,2,2,2,3,3,\ + 3,3,3,3,3,3,3,3,2,2,2,2,2,2,3,3, 3,3,3,3,3,3,3,3,2,2,2,2,2,2,3,3,\ + 3,3,3,3,3,3,3,3,2,2,2,2,2,2,3,3, 3,3,3,3,3,3,3,3,2,2,2,2,2,2,3,3 + +#endif /*_XTENSA_CORE_TIE_H*/ + |