diff options
Diffstat (limited to 'drivers/acpi/acpica/dsfield.c')
| -rw-r--r-- | drivers/acpi/acpica/dsfield.c | 794 |
1 files changed, 794 insertions, 0 deletions
diff --git a/drivers/acpi/acpica/dsfield.c b/drivers/acpi/acpica/dsfield.c new file mode 100644 index 000000000..43b40de90 --- /dev/null +++ b/drivers/acpi/acpica/dsfield.c @@ -0,0 +1,794 @@ +/****************************************************************************** + * + * Module Name: dsfield - Dispatcher field routines + * + *****************************************************************************/ + +/* + * Copyright (C) 2000 - 2015, Intel Corp. + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions, and the following disclaimer, + * without modification. + * 2. Redistributions in binary form must reproduce at minimum a disclaimer + * substantially similar to the "NO WARRANTY" disclaimer below + * ("Disclaimer") and any redistribution must be conditioned upon + * including a substantially similar Disclaimer requirement for further + * binary redistribution. + * 3. Neither the names of the above-listed copyright holders nor the names + * of any contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * Alternatively, this software may be distributed under the terms of the + * GNU General Public License ("GPL") version 2 as published by the Free + * Software Foundation. + * + * NO WARRANTY + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR + * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT + * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS + * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) + * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, + * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING + * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE + * POSSIBILITY OF SUCH DAMAGES. + */ + +#include <acpi/acpi.h> +#include "accommon.h" +#include "amlcode.h" +#include "acdispat.h" +#include "acinterp.h" +#include "acnamesp.h" +#include "acparser.h" + +#define _COMPONENT ACPI_DISPATCHER +ACPI_MODULE_NAME("dsfield") + +/* Local prototypes */ +#ifdef ACPI_ASL_COMPILER +#include "acdisasm.h" +static acpi_status +acpi_ds_create_external_region(acpi_status lookup_status, + union acpi_parse_object *op, + char *path, + struct acpi_walk_state *walk_state, + struct acpi_namespace_node **node); +#endif + +static acpi_status +acpi_ds_get_field_names(struct acpi_create_field_info *info, + struct acpi_walk_state *walk_state, + union acpi_parse_object *arg); + +#ifdef ACPI_ASL_COMPILER +/******************************************************************************* + * + * FUNCTION: acpi_ds_create_external_region (iASL Disassembler only) + * + * PARAMETERS: lookup_status - Status from ns_lookup operation + * op - Op containing the Field definition and args + * path - Pathname of the region + * ` walk_state - Current method state + * node - Where the new region node is returned + * + * RETURN: Status + * + * DESCRIPTION: Add region to the external list if NOT_FOUND. Create a new + * region node/object. + * + ******************************************************************************/ + +static acpi_status +acpi_ds_create_external_region(acpi_status lookup_status, + union acpi_parse_object *op, + char *path, + struct acpi_walk_state *walk_state, + struct acpi_namespace_node **node) +{ + acpi_status status; + union acpi_operand_object *obj_desc; + + if (lookup_status != AE_NOT_FOUND) { + return (lookup_status); + } + + /* + * Table disassembly: + * operation_region not found. Generate an External for it, and + * insert the name into the namespace. + */ + acpi_dm_add_op_to_external_list(op, path, ACPI_TYPE_REGION, 0, 0); + status = acpi_ns_lookup(walk_state->scope_info, path, ACPI_TYPE_REGION, + ACPI_IMODE_LOAD_PASS1, ACPI_NS_SEARCH_PARENT, + walk_state, node); + if (ACPI_FAILURE(status)) { + return (status); + } + + /* Must create and install a region object for the new node */ + + obj_desc = acpi_ut_create_internal_object(ACPI_TYPE_REGION); + if (!obj_desc) { + return (AE_NO_MEMORY); + } + + obj_desc->region.node = *node; + status = acpi_ns_attach_object(*node, obj_desc, ACPI_TYPE_REGION); + return (status); +} +#endif + +/******************************************************************************* + * + * FUNCTION: acpi_ds_create_buffer_field + * + * PARAMETERS: op - Current parse op (create_XXField) + * walk_state - Current state + * + * RETURN: Status + * + * DESCRIPTION: Execute the create_field operators: + * create_bit_field_op, + * create_byte_field_op, + * create_word_field_op, + * create_dword_field_op, + * create_qword_field_op, + * create_field_op (all of which define a field in a buffer) + * + ******************************************************************************/ + +acpi_status +acpi_ds_create_buffer_field(union acpi_parse_object *op, + struct acpi_walk_state *walk_state) +{ + union acpi_parse_object *arg; + struct acpi_namespace_node *node; + acpi_status status; + union acpi_operand_object *obj_desc; + union acpi_operand_object *second_desc = NULL; + u32 flags; + + ACPI_FUNCTION_TRACE(ds_create_buffer_field); + + /* + * Get the name_string argument (name of the new buffer_field) + */ + if (op->common.aml_opcode == AML_CREATE_FIELD_OP) { + + /* For create_field, name is the 4th argument */ + + arg = acpi_ps_get_arg(op, 3); + } else { + /* For all other create_XXXField operators, name is the 3rd argument */ + + arg = acpi_ps_get_arg(op, 2); + } + + if (!arg) { + return_ACPI_STATUS(AE_AML_NO_OPERAND); + } + + if (walk_state->deferred_node) { + node = walk_state->deferred_node; + status = AE_OK; + } else { + /* Execute flag should always be set when this function is entered */ + + if (!(walk_state->parse_flags & ACPI_PARSE_EXECUTE)) { + return_ACPI_STATUS(AE_AML_INTERNAL); + } + + /* Creating new namespace node, should not already exist */ + + flags = ACPI_NS_NO_UPSEARCH | ACPI_NS_DONT_OPEN_SCOPE | + ACPI_NS_ERROR_IF_FOUND; + + /* + * Mark node temporary if we are executing a normal control + * method. (Don't mark if this is a module-level code method) + */ + if (walk_state->method_node && + !(walk_state->parse_flags & ACPI_PARSE_MODULE_LEVEL)) { + flags |= ACPI_NS_TEMPORARY; + } + + /* Enter the name_string into the namespace */ + + status = + acpi_ns_lookup(walk_state->scope_info, + arg->common.value.string, ACPI_TYPE_ANY, + ACPI_IMODE_LOAD_PASS1, flags, walk_state, + &node); + if (ACPI_FAILURE(status)) { + ACPI_ERROR_NAMESPACE(arg->common.value.string, status); + return_ACPI_STATUS(status); + } + } + + /* + * We could put the returned object (Node) on the object stack for later, + * but for now, we will put it in the "op" object that the parser uses, + * so we can get it again at the end of this scope. + */ + op->common.node = node; + + /* + * If there is no object attached to the node, this node was just created + * and we need to create the field object. Otherwise, this was a lookup + * of an existing node and we don't want to create the field object again. + */ + obj_desc = acpi_ns_get_attached_object(node); + if (obj_desc) { + return_ACPI_STATUS(AE_OK); + } + + /* + * The Field definition is not fully parsed at this time. + * (We must save the address of the AML for the buffer and index operands) + */ + + /* Create the buffer field object */ + + obj_desc = acpi_ut_create_internal_object(ACPI_TYPE_BUFFER_FIELD); + if (!obj_desc) { + status = AE_NO_MEMORY; + goto cleanup; + } + + /* + * Remember location in AML stream of the field unit opcode and operands -- + * since the buffer and index operands must be evaluated. + */ + second_desc = obj_desc->common.next_object; + second_desc->extra.aml_start = op->named.data; + second_desc->extra.aml_length = op->named.length; + obj_desc->buffer_field.node = node; + + /* Attach constructed field descriptors to parent node */ + + status = acpi_ns_attach_object(node, obj_desc, ACPI_TYPE_BUFFER_FIELD); + if (ACPI_FAILURE(status)) { + goto cleanup; + } + +cleanup: + + /* Remove local reference to the object */ + + acpi_ut_remove_reference(obj_desc); + return_ACPI_STATUS(status); +} + +/******************************************************************************* + * + * FUNCTION: acpi_ds_get_field_names + * + * PARAMETERS: info - create_field info structure + * ` walk_state - Current method state + * arg - First parser arg for the field name list + * + * RETURN: Status + * + * DESCRIPTION: Process all named fields in a field declaration. Names are + * entered into the namespace. + * + ******************************************************************************/ + +static acpi_status +acpi_ds_get_field_names(struct acpi_create_field_info *info, + struct acpi_walk_state *walk_state, + union acpi_parse_object *arg) +{ + acpi_status status; + u64 position; + union acpi_parse_object *child; + + ACPI_FUNCTION_TRACE_PTR(ds_get_field_names, info); + + /* First field starts at bit zero */ + + info->field_bit_position = 0; + + /* Process all elements in the field list (of parse nodes) */ + + while (arg) { + /* + * Four types of field elements are handled: + * 1) name - Enters a new named field into the namespace + * 2) offset - specifies a bit offset + * 3) access_as - changes the access mode/attributes + * 4) connection - Associate a resource template with the field + */ + switch (arg->common.aml_opcode) { + case AML_INT_RESERVEDFIELD_OP: + + position = (u64) info->field_bit_position + + (u64) arg->common.value.size; + + if (position > ACPI_UINT32_MAX) { + ACPI_ERROR((AE_INFO, + "Bit offset within field too large (> 0xFFFFFFFF)")); + return_ACPI_STATUS(AE_SUPPORT); + } + + info->field_bit_position = (u32) position; + break; + + case AML_INT_ACCESSFIELD_OP: + case AML_INT_EXTACCESSFIELD_OP: + /* + * Get new access_type, access_attribute, and access_length fields + * -- to be used for all field units that follow, until the + * end-of-field or another access_as keyword is encountered. + * NOTE. These three bytes are encoded in the integer value + * of the parseop for convenience. + * + * In field_flags, preserve the flag bits other than the + * ACCESS_TYPE bits. + */ + + /* access_type (byte_acc, word_acc, etc.) */ + + info->field_flags = (u8) + ((info-> + field_flags & ~(AML_FIELD_ACCESS_TYPE_MASK)) | + ((u8)((u32)(arg->common.value.integer & 0x07)))); + + /* access_attribute (attrib_quick, attrib_byte, etc.) */ + + info->attribute = + (u8)((arg->common.value.integer >> 8) & 0xFF); + + /* access_length (for serial/buffer protocols) */ + + info->access_length = + (u8)((arg->common.value.integer >> 16) & 0xFF); + break; + + case AML_INT_CONNECTION_OP: + /* + * Clear any previous connection. New connection is used for all + * fields that follow, similar to access_as + */ + info->resource_buffer = NULL; + info->connection_node = NULL; + info->pin_number_index = 0; + + /* + * A Connection() is either an actual resource descriptor (buffer) + * or a named reference to a resource template + */ + child = arg->common.value.arg; + if (child->common.aml_opcode == AML_INT_BYTELIST_OP) { + info->resource_buffer = child->named.data; + info->resource_length = + (u16)child->named.value.integer; + } else { + /* Lookup the Connection() namepath, it should already exist */ + + status = acpi_ns_lookup(walk_state->scope_info, + child->common.value. + name, ACPI_TYPE_ANY, + ACPI_IMODE_EXECUTE, + ACPI_NS_DONT_OPEN_SCOPE, + walk_state, + &info->connection_node); + if (ACPI_FAILURE(status)) { + ACPI_ERROR_NAMESPACE(child->common. + value.name, + status); + return_ACPI_STATUS(status); + } + } + break; + + case AML_INT_NAMEDFIELD_OP: + + /* Lookup the name, it should already exist */ + + status = acpi_ns_lookup(walk_state->scope_info, + (char *)&arg->named.name, + info->field_type, + ACPI_IMODE_EXECUTE, + ACPI_NS_DONT_OPEN_SCOPE, + walk_state, &info->field_node); + if (ACPI_FAILURE(status)) { + ACPI_ERROR_NAMESPACE((char *)&arg->named.name, + status); + return_ACPI_STATUS(status); + } else { + arg->common.node = info->field_node; + info->field_bit_length = arg->common.value.size; + + /* + * If there is no object attached to the node, this node was + * just created and we need to create the field object. + * Otherwise, this was a lookup of an existing node and we + * don't want to create the field object again. + */ + if (!acpi_ns_get_attached_object + (info->field_node)) { + status = acpi_ex_prep_field_value(info); + if (ACPI_FAILURE(status)) { + return_ACPI_STATUS(status); + } + } + } + + /* Keep track of bit position for the next field */ + + position = (u64) info->field_bit_position + + (u64) arg->common.value.size; + + if (position > ACPI_UINT32_MAX) { + ACPI_ERROR((AE_INFO, + "Field [%4.4s] bit offset too large (> 0xFFFFFFFF)", + ACPI_CAST_PTR(char, + &info->field_node-> + name))); + return_ACPI_STATUS(AE_SUPPORT); + } + + info->field_bit_position += info->field_bit_length; + info->pin_number_index++; /* Index relative to previous Connection() */ + break; + + default: + + ACPI_ERROR((AE_INFO, + "Invalid opcode in field list: 0x%X", + arg->common.aml_opcode)); + return_ACPI_STATUS(AE_AML_BAD_OPCODE); + } + + arg = arg->common.next; + } + + return_ACPI_STATUS(AE_OK); +} + +/******************************************************************************* + * + * FUNCTION: acpi_ds_create_field + * + * PARAMETERS: op - Op containing the Field definition and args + * region_node - Object for the containing Operation Region + * ` walk_state - Current method state + * + * RETURN: Status + * + * DESCRIPTION: Create a new field in the specified operation region + * + ******************************************************************************/ + +acpi_status +acpi_ds_create_field(union acpi_parse_object *op, + struct acpi_namespace_node *region_node, + struct acpi_walk_state *walk_state) +{ + acpi_status status; + union acpi_parse_object *arg; + struct acpi_create_field_info info; + + ACPI_FUNCTION_TRACE_PTR(ds_create_field, op); + + /* First arg is the name of the parent op_region (must already exist) */ + + arg = op->common.value.arg; + + if (!region_node) { + status = + acpi_ns_lookup(walk_state->scope_info, + arg->common.value.name, ACPI_TYPE_REGION, + ACPI_IMODE_EXECUTE, ACPI_NS_SEARCH_PARENT, + walk_state, ®ion_node); +#ifdef ACPI_ASL_COMPILER + status = acpi_ds_create_external_region(status, arg, + arg->common.value.name, + walk_state, + ®ion_node); +#endif + if (ACPI_FAILURE(status)) { + ACPI_ERROR_NAMESPACE(arg->common.value.name, status); + return_ACPI_STATUS(status); + } + } + + ACPI_MEMSET(&info, 0, sizeof(struct acpi_create_field_info)); + + /* Second arg is the field flags */ + + arg = arg->common.next; + info.field_flags = (u8) arg->common.value.integer; + info.attribute = 0; + + /* Each remaining arg is a Named Field */ + + info.field_type = ACPI_TYPE_LOCAL_REGION_FIELD; + info.region_node = region_node; + + status = acpi_ds_get_field_names(&info, walk_state, arg->common.next); + return_ACPI_STATUS(status); +} + +/******************************************************************************* + * + * FUNCTION: acpi_ds_init_field_objects + * + * PARAMETERS: op - Op containing the Field definition and args + * ` walk_state - Current method state + * + * RETURN: Status + * + * DESCRIPTION: For each "Field Unit" name in the argument list that is + * part of the field declaration, enter the name into the + * namespace. + * + ******************************************************************************/ + +acpi_status +acpi_ds_init_field_objects(union acpi_parse_object *op, + struct acpi_walk_state *walk_state) +{ + acpi_status status; + union acpi_parse_object *arg = NULL; + struct acpi_namespace_node *node; + u8 type = 0; + u32 flags; + + ACPI_FUNCTION_TRACE_PTR(ds_init_field_objects, op); + + /* Execute flag should always be set when this function is entered */ + + if (!(walk_state->parse_flags & ACPI_PARSE_EXECUTE)) { + if (walk_state->parse_flags & ACPI_PARSE_DEFERRED_OP) { + + /* bank_field Op is deferred, just return OK */ + + return_ACPI_STATUS(AE_OK); + } + + return_ACPI_STATUS(AE_AML_INTERNAL); + } + + /* + * Get the field_list argument for this opcode. This is the start of the + * list of field elements. + */ + switch (walk_state->opcode) { + case AML_FIELD_OP: + + arg = acpi_ps_get_arg(op, 2); + type = ACPI_TYPE_LOCAL_REGION_FIELD; + break; + + case AML_BANK_FIELD_OP: + + arg = acpi_ps_get_arg(op, 4); + type = ACPI_TYPE_LOCAL_BANK_FIELD; + break; + + case AML_INDEX_FIELD_OP: + + arg = acpi_ps_get_arg(op, 3); + type = ACPI_TYPE_LOCAL_INDEX_FIELD; + break; + + default: + + return_ACPI_STATUS(AE_BAD_PARAMETER); + } + + /* Creating new namespace node(s), should not already exist */ + + flags = ACPI_NS_NO_UPSEARCH | ACPI_NS_DONT_OPEN_SCOPE | + ACPI_NS_ERROR_IF_FOUND; + + /* + * Mark node(s) temporary if we are executing a normal control + * method. (Don't mark if this is a module-level code method) + */ + if (walk_state->method_node && + !(walk_state->parse_flags & ACPI_PARSE_MODULE_LEVEL)) { + flags |= ACPI_NS_TEMPORARY; + } + + /* + * Walk the list of entries in the field_list + * Note: field_list can be of zero length. In this case, Arg will be NULL. + */ + while (arg) { + /* + * Ignore OFFSET/ACCESSAS/CONNECTION terms here; we are only interested + * in the field names in order to enter them into the namespace. + */ + if (arg->common.aml_opcode == AML_INT_NAMEDFIELD_OP) { + status = acpi_ns_lookup(walk_state->scope_info, + (char *)&arg->named.name, type, + ACPI_IMODE_LOAD_PASS1, flags, + walk_state, &node); + if (ACPI_FAILURE(status)) { + ACPI_ERROR_NAMESPACE((char *)&arg->named.name, + status); + if (status != AE_ALREADY_EXISTS) { + return_ACPI_STATUS(status); + } + + /* Name already exists, just ignore this error */ + + status = AE_OK; + } + + arg->common.node = node; + } + + /* Get the next field element in the list */ + + arg = arg->common.next; + } + + return_ACPI_STATUS(AE_OK); +} + +/******************************************************************************* + * + * FUNCTION: acpi_ds_create_bank_field + * + * PARAMETERS: op - Op containing the Field definition and args + * region_node - Object for the containing Operation Region + * walk_state - Current method state + * + * RETURN: Status + * + * DESCRIPTION: Create a new bank field in the specified operation region + * + ******************************************************************************/ + +acpi_status +acpi_ds_create_bank_field(union acpi_parse_object *op, + struct acpi_namespace_node *region_node, + struct acpi_walk_state *walk_state) +{ + acpi_status status; + union acpi_parse_object *arg; + struct acpi_create_field_info info; + + ACPI_FUNCTION_TRACE_PTR(ds_create_bank_field, op); + + /* First arg is the name of the parent op_region (must already exist) */ + + arg = op->common.value.arg; + if (!region_node) { + status = + acpi_ns_lookup(walk_state->scope_info, + arg->common.value.name, ACPI_TYPE_REGION, + ACPI_IMODE_EXECUTE, ACPI_NS_SEARCH_PARENT, + walk_state, ®ion_node); +#ifdef ACPI_ASL_COMPILER + status = acpi_ds_create_external_region(status, arg, + arg->common.value.name, + walk_state, + ®ion_node); +#endif + if (ACPI_FAILURE(status)) { + ACPI_ERROR_NAMESPACE(arg->common.value.name, status); + return_ACPI_STATUS(status); + } + } + + /* Second arg is the Bank Register (Field) (must already exist) */ + + arg = arg->common.next; + status = + acpi_ns_lookup(walk_state->scope_info, arg->common.value.string, + ACPI_TYPE_ANY, ACPI_IMODE_EXECUTE, + ACPI_NS_SEARCH_PARENT, walk_state, + &info.register_node); + if (ACPI_FAILURE(status)) { + ACPI_ERROR_NAMESPACE(arg->common.value.string, status); + return_ACPI_STATUS(status); + } + + /* + * Third arg is the bank_value + * This arg is a term_arg, not a constant + * It will be evaluated later, by acpi_ds_eval_bank_field_operands + */ + arg = arg->common.next; + + /* Fourth arg is the field flags */ + + arg = arg->common.next; + info.field_flags = (u8) arg->common.value.integer; + + /* Each remaining arg is a Named Field */ + + info.field_type = ACPI_TYPE_LOCAL_BANK_FIELD; + info.region_node = region_node; + + /* + * Use Info.data_register_node to store bank_field Op + * It's safe because data_register_node will never be used when create bank field + * We store aml_start and aml_length in the bank_field Op for late evaluation + * Used in acpi_ex_prep_field_value(Info) + * + * TBD: Or, should we add a field in struct acpi_create_field_info, like "void *ParentOp"? + */ + info.data_register_node = (struct acpi_namespace_node *)op; + + status = acpi_ds_get_field_names(&info, walk_state, arg->common.next); + return_ACPI_STATUS(status); +} + +/******************************************************************************* + * + * FUNCTION: acpi_ds_create_index_field + * + * PARAMETERS: op - Op containing the Field definition and args + * region_node - Object for the containing Operation Region + * ` walk_state - Current method state + * + * RETURN: Status + * + * DESCRIPTION: Create a new index field in the specified operation region + * + ******************************************************************************/ + +acpi_status +acpi_ds_create_index_field(union acpi_parse_object *op, + struct acpi_namespace_node *region_node, + struct acpi_walk_state *walk_state) +{ + acpi_status status; + union acpi_parse_object *arg; + struct acpi_create_field_info info; + + ACPI_FUNCTION_TRACE_PTR(ds_create_index_field, op); + + /* First arg is the name of the Index register (must already exist) */ + + arg = op->common.value.arg; + status = + acpi_ns_lookup(walk_state->scope_info, arg->common.value.string, + ACPI_TYPE_ANY, ACPI_IMODE_EXECUTE, + ACPI_NS_SEARCH_PARENT, walk_state, + &info.register_node); + if (ACPI_FAILURE(status)) { + ACPI_ERROR_NAMESPACE(arg->common.value.string, status); + return_ACPI_STATUS(status); + } + + /* Second arg is the data register (must already exist) */ + + arg = arg->common.next; + status = + acpi_ns_lookup(walk_state->scope_info, arg->common.value.string, + ACPI_TYPE_ANY, ACPI_IMODE_EXECUTE, + ACPI_NS_SEARCH_PARENT, walk_state, + &info.data_register_node); + if (ACPI_FAILURE(status)) { + ACPI_ERROR_NAMESPACE(arg->common.value.string, status); + return_ACPI_STATUS(status); + } + + /* Next arg is the field flags */ + + arg = arg->common.next; + info.field_flags = (u8) arg->common.value.integer; + + /* Each remaining arg is a Named Field */ + + info.field_type = ACPI_TYPE_LOCAL_INDEX_FIELD; + info.region_node = region_node; + + status = acpi_ds_get_field_names(&info, walk_state, arg->common.next); + return_ACPI_STATUS(status); +} |