diff options
Diffstat (limited to 'drivers/acpi/acpica/dswload.c')
| -rw-r--r-- | drivers/acpi/acpica/dswload.c | 570 |
1 files changed, 570 insertions, 0 deletions
diff --git a/drivers/acpi/acpica/dswload.c b/drivers/acpi/acpica/dswload.c new file mode 100644 index 000000000..843942fb4 --- /dev/null +++ b/drivers/acpi/acpica/dswload.c @@ -0,0 +1,570 @@ +/****************************************************************************** + * + * Module Name: dswload - Dispatcher first pass namespace load callbacks + * + *****************************************************************************/ + +/* + * Copyright (C) 2000 - 2015, Intel Corp. + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions, and the following disclaimer, + * without modification. + * 2. Redistributions in binary form must reproduce at minimum a disclaimer + * substantially similar to the "NO WARRANTY" disclaimer below + * ("Disclaimer") and any redistribution must be conditioned upon + * including a substantially similar Disclaimer requirement for further + * binary redistribution. + * 3. Neither the names of the above-listed copyright holders nor the names + * of any contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * Alternatively, this software may be distributed under the terms of the + * GNU General Public License ("GPL") version 2 as published by the Free + * Software Foundation. + * + * NO WARRANTY + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR + * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT + * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS + * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) + * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, + * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING + * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE + * POSSIBILITY OF SUCH DAMAGES. + */ + +#include <acpi/acpi.h> +#include "accommon.h" +#include "acparser.h" +#include "amlcode.h" +#include "acdispat.h" +#include "acinterp.h" +#include "acnamesp.h" + +#ifdef ACPI_ASL_COMPILER +#include "acdisasm.h" +#endif + +#define _COMPONENT ACPI_DISPATCHER +ACPI_MODULE_NAME("dswload") + +/******************************************************************************* + * + * FUNCTION: acpi_ds_init_callbacks + * + * PARAMETERS: walk_state - Current state of the parse tree walk + * pass_number - 1, 2, or 3 + * + * RETURN: Status + * + * DESCRIPTION: Init walk state callbacks + * + ******************************************************************************/ +acpi_status +acpi_ds_init_callbacks(struct acpi_walk_state *walk_state, u32 pass_number) +{ + + switch (pass_number) { + case 0: + + /* Parse only - caller will setup callbacks */ + + walk_state->parse_flags = ACPI_PARSE_LOAD_PASS1 | + ACPI_PARSE_DELETE_TREE | ACPI_PARSE_DISASSEMBLE; + walk_state->descending_callback = NULL; + walk_state->ascending_callback = NULL; + break; + + case 1: + + /* Load pass 1 */ + + walk_state->parse_flags = ACPI_PARSE_LOAD_PASS1 | + ACPI_PARSE_DELETE_TREE; + walk_state->descending_callback = acpi_ds_load1_begin_op; + walk_state->ascending_callback = acpi_ds_load1_end_op; + break; + + case 2: + + /* Load pass 2 */ + + walk_state->parse_flags = ACPI_PARSE_LOAD_PASS1 | + ACPI_PARSE_DELETE_TREE; + walk_state->descending_callback = acpi_ds_load2_begin_op; + walk_state->ascending_callback = acpi_ds_load2_end_op; + break; + + case 3: + + /* Execution pass */ + +#ifndef ACPI_NO_METHOD_EXECUTION + walk_state->parse_flags |= ACPI_PARSE_EXECUTE | + ACPI_PARSE_DELETE_TREE; + walk_state->descending_callback = acpi_ds_exec_begin_op; + walk_state->ascending_callback = acpi_ds_exec_end_op; +#endif + break; + + default: + + return (AE_BAD_PARAMETER); + } + + return (AE_OK); +} + +/******************************************************************************* + * + * FUNCTION: acpi_ds_load1_begin_op + * + * PARAMETERS: walk_state - Current state of the parse tree walk + * out_op - Where to return op if a new one is created + * + * RETURN: Status + * + * DESCRIPTION: Descending callback used during the loading of ACPI tables. + * + ******************************************************************************/ + +acpi_status +acpi_ds_load1_begin_op(struct acpi_walk_state * walk_state, + union acpi_parse_object ** out_op) +{ + union acpi_parse_object *op; + struct acpi_namespace_node *node; + acpi_status status; + acpi_object_type object_type; + char *path; + u32 flags; + + ACPI_FUNCTION_TRACE(ds_load1_begin_op); + + op = walk_state->op; + ACPI_DEBUG_PRINT((ACPI_DB_DISPATCH, "Op=%p State=%p\n", op, + walk_state)); + + /* We are only interested in opcodes that have an associated name */ + + if (op) { + if (!(walk_state->op_info->flags & AML_NAMED)) { + *out_op = op; + return_ACPI_STATUS(AE_OK); + } + + /* Check if this object has already been installed in the namespace */ + + if (op->common.node) { + *out_op = op; + return_ACPI_STATUS(AE_OK); + } + } + + path = acpi_ps_get_next_namestring(&walk_state->parser_state); + + /* Map the raw opcode into an internal object type */ + + object_type = walk_state->op_info->object_type; + + ACPI_DEBUG_PRINT((ACPI_DB_DISPATCH, + "State=%p Op=%p [%s]\n", walk_state, op, + acpi_ut_get_type_name(object_type))); + + switch (walk_state->opcode) { + case AML_SCOPE_OP: + /* + * The target name of the Scope() operator must exist at this point so + * that we can actually open the scope to enter new names underneath it. + * Allow search-to-root for single namesegs. + */ + status = + acpi_ns_lookup(walk_state->scope_info, path, object_type, + ACPI_IMODE_EXECUTE, ACPI_NS_SEARCH_PARENT, + walk_state, &(node)); +#ifdef ACPI_ASL_COMPILER + if (status == AE_NOT_FOUND) { + /* + * Table disassembly: + * Target of Scope() not found. Generate an External for it, and + * insert the name into the namespace. + */ + acpi_dm_add_op_to_external_list(op, path, + ACPI_TYPE_DEVICE, 0, 0); + status = + acpi_ns_lookup(walk_state->scope_info, path, + object_type, ACPI_IMODE_LOAD_PASS1, + ACPI_NS_SEARCH_PARENT, walk_state, + &node); + } +#endif + if (ACPI_FAILURE(status)) { + ACPI_ERROR_NAMESPACE(path, status); + return_ACPI_STATUS(status); + } + + /* + * Check to make sure that the target is + * one of the opcodes that actually opens a scope + */ + switch (node->type) { + case ACPI_TYPE_ANY: + case ACPI_TYPE_LOCAL_SCOPE: /* Scope */ + case ACPI_TYPE_DEVICE: + case ACPI_TYPE_POWER: + case ACPI_TYPE_PROCESSOR: + case ACPI_TYPE_THERMAL: + + /* These are acceptable types */ + break; + + case ACPI_TYPE_INTEGER: + case ACPI_TYPE_STRING: + case ACPI_TYPE_BUFFER: + /* + * These types we will allow, but we will change the type. + * This enables some existing code of the form: + * + * Name (DEB, 0) + * Scope (DEB) { ... } + * + * Note: silently change the type here. On the second pass, + * we will report a warning + */ + ACPI_DEBUG_PRINT((ACPI_DB_INFO, + "Type override - [%4.4s] had invalid type (%s) " + "for Scope operator, changed to type ANY\n", + acpi_ut_get_node_name(node), + acpi_ut_get_type_name(node->type))); + + node->type = ACPI_TYPE_ANY; + walk_state->scope_info->common.value = ACPI_TYPE_ANY; + break; + + case ACPI_TYPE_METHOD: + /* + * Allow scope change to root during execution of module-level + * code. Root is typed METHOD during this time. + */ + if ((node == acpi_gbl_root_node) && + (walk_state-> + parse_flags & ACPI_PARSE_MODULE_LEVEL)) { + break; + } + + /*lint -fallthrough */ + + default: + + /* All other types are an error */ + + ACPI_ERROR((AE_INFO, + "Invalid type (%s) for target of " + "Scope operator [%4.4s] (Cannot override)", + acpi_ut_get_type_name(node->type), + acpi_ut_get_node_name(node))); + + return_ACPI_STATUS(AE_AML_OPERAND_TYPE); + } + break; + + default: + /* + * For all other named opcodes, we will enter the name into + * the namespace. + * + * Setup the search flags. + * Since we are entering a name into the namespace, we do not want to + * enable the search-to-root upsearch. + * + * There are only two conditions where it is acceptable that the name + * already exists: + * 1) the Scope() operator can reopen a scoping object that was + * previously defined (Scope, Method, Device, etc.) + * 2) Whenever we are parsing a deferred opcode (op_region, Buffer, + * buffer_field, or Package), the name of the object is already + * in the namespace. + */ + if (walk_state->deferred_node) { + + /* This name is already in the namespace, get the node */ + + node = walk_state->deferred_node; + status = AE_OK; + break; + } + + /* + * If we are executing a method, do not create any namespace objects + * during the load phase, only during execution. + */ + if (walk_state->method_node) { + node = NULL; + status = AE_OK; + break; + } + + flags = ACPI_NS_NO_UPSEARCH; + if ((walk_state->opcode != AML_SCOPE_OP) && + (!(walk_state->parse_flags & ACPI_PARSE_DEFERRED_OP))) { + flags |= ACPI_NS_ERROR_IF_FOUND; + ACPI_DEBUG_PRINT((ACPI_DB_DISPATCH, + "[%s] Cannot already exist\n", + acpi_ut_get_type_name(object_type))); + } else { + ACPI_DEBUG_PRINT((ACPI_DB_DISPATCH, + "[%s] Both Find or Create allowed\n", + acpi_ut_get_type_name(object_type))); + } + + /* + * Enter the named type into the internal namespace. We enter the name + * as we go downward in the parse tree. Any necessary subobjects that + * involve arguments to the opcode must be created as we go back up the + * parse tree later. + */ + status = + acpi_ns_lookup(walk_state->scope_info, path, object_type, + ACPI_IMODE_LOAD_PASS1, flags, walk_state, + &node); + if (ACPI_FAILURE(status)) { + if (status == AE_ALREADY_EXISTS) { + + /* The name already exists in this scope */ + + if (node->flags & ANOBJ_IS_EXTERNAL) { + /* + * Allow one create on an object or segment that was + * previously declared External + */ + node->flags &= ~ANOBJ_IS_EXTERNAL; + node->type = (u8) object_type; + + /* Just retyped a node, probably will need to open a scope */ + + if (acpi_ns_opens_scope(object_type)) { + status = + acpi_ds_scope_stack_push + (node, object_type, + walk_state); + if (ACPI_FAILURE(status)) { + return_ACPI_STATUS + (status); + } + } + + status = AE_OK; + } + } + + if (ACPI_FAILURE(status)) { + ACPI_ERROR_NAMESPACE(path, status); + return_ACPI_STATUS(status); + } + } + break; + } + + /* Common exit */ + + if (!op) { + + /* Create a new op */ + + op = acpi_ps_alloc_op(walk_state->opcode); + if (!op) { + return_ACPI_STATUS(AE_NO_MEMORY); + } + } + + /* Initialize the op */ + +#if (defined (ACPI_NO_METHOD_EXECUTION) || defined (ACPI_CONSTANT_EVAL_ONLY)) + op->named.path = ACPI_CAST_PTR(u8, path); +#endif + + if (node) { + /* + * Put the Node in the "op" object that the parser uses, so we + * can get it again quickly when this scope is closed + */ + op->common.node = node; + op->named.name = node->name.integer; + } + + acpi_ps_append_arg(acpi_ps_get_parent_scope(&walk_state->parser_state), + op); + *out_op = op; + return_ACPI_STATUS(status); +} + +/******************************************************************************* + * + * FUNCTION: acpi_ds_load1_end_op + * + * PARAMETERS: walk_state - Current state of the parse tree walk + * + * RETURN: Status + * + * DESCRIPTION: Ascending callback used during the loading of the namespace, + * both control methods and everything else. + * + ******************************************************************************/ + +acpi_status acpi_ds_load1_end_op(struct acpi_walk_state *walk_state) +{ + union acpi_parse_object *op; + acpi_object_type object_type; + acpi_status status = AE_OK; + + ACPI_FUNCTION_TRACE(ds_load1_end_op); + + op = walk_state->op; + ACPI_DEBUG_PRINT((ACPI_DB_DISPATCH, "Op=%p State=%p\n", op, + walk_state)); + + /* We are only interested in opcodes that have an associated name */ + + if (!(walk_state->op_info->flags & (AML_NAMED | AML_FIELD))) { + return_ACPI_STATUS(AE_OK); + } + + /* Get the object type to determine if we should pop the scope */ + + object_type = walk_state->op_info->object_type; + +#ifndef ACPI_NO_METHOD_EXECUTION + if (walk_state->op_info->flags & AML_FIELD) { + /* + * If we are executing a method, do not create any namespace objects + * during the load phase, only during execution. + */ + if (!walk_state->method_node) { + if (walk_state->opcode == AML_FIELD_OP || + walk_state->opcode == AML_BANK_FIELD_OP || + walk_state->opcode == AML_INDEX_FIELD_OP) { + status = + acpi_ds_init_field_objects(op, walk_state); + } + } + return_ACPI_STATUS(status); + } + + /* + * If we are executing a method, do not create any namespace objects + * during the load phase, only during execution. + */ + if (!walk_state->method_node) { + if (op->common.aml_opcode == AML_REGION_OP) { + status = + acpi_ex_create_region(op->named.data, + op->named.length, + (acpi_adr_space_type) ((op-> + common. + value. + arg)-> + common. + value. + integer), + walk_state); + if (ACPI_FAILURE(status)) { + return_ACPI_STATUS(status); + } + } else if (op->common.aml_opcode == AML_DATA_REGION_OP) { + status = + acpi_ex_create_region(op->named.data, + op->named.length, + ACPI_ADR_SPACE_DATA_TABLE, + walk_state); + if (ACPI_FAILURE(status)) { + return_ACPI_STATUS(status); + } + } + } +#endif + + if (op->common.aml_opcode == AML_NAME_OP) { + + /* For Name opcode, get the object type from the argument */ + + if (op->common.value.arg) { + object_type = (acpi_ps_get_opcode_info((op->common. + value.arg)-> + common. + aml_opcode))-> + object_type; + + /* Set node type if we have a namespace node */ + + if (op->common.node) { + op->common.node->type = (u8) object_type; + } + } + } + + /* + * If we are executing a method, do not create any namespace objects + * during the load phase, only during execution. + */ + if (!walk_state->method_node) { + if (op->common.aml_opcode == AML_METHOD_OP) { + /* + * method_op pkg_length name_string method_flags term_list + * + * Note: We must create the method node/object pair as soon as we + * see the method declaration. This allows later pass1 parsing + * of invocations of the method (need to know the number of + * arguments.) + */ + ACPI_DEBUG_PRINT((ACPI_DB_DISPATCH, + "LOADING-Method: State=%p Op=%p NamedObj=%p\n", + walk_state, op, op->named.node)); + + if (!acpi_ns_get_attached_object(op->named.node)) { + walk_state->operands[0] = + ACPI_CAST_PTR(void, op->named.node); + walk_state->num_operands = 1; + + status = + acpi_ds_create_operands(walk_state, + op->common.value. + arg); + if (ACPI_SUCCESS(status)) { + status = + acpi_ex_create_method(op->named. + data, + op->named. + length, + walk_state); + } + + walk_state->operands[0] = NULL; + walk_state->num_operands = 0; + + if (ACPI_FAILURE(status)) { + return_ACPI_STATUS(status); + } + } + } + } + + /* Pop the scope stack (only if loading a table) */ + + if (!walk_state->method_node && acpi_ns_opens_scope(object_type)) { + ACPI_DEBUG_PRINT((ACPI_DB_DISPATCH, + "(%s): Popping scope for Op %p\n", + acpi_ut_get_type_name(object_type), op)); + + status = acpi_ds_scope_stack_pop(walk_state); + } + + return_ACPI_STATUS(status); +} |