summaryrefslogtreecommitdiff
path: root/drivers/ata/pata_acpi.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/ata/pata_acpi.c')
-rw-r--r--drivers/ata/pata_acpi.c280
1 files changed, 280 insertions, 0 deletions
diff --git a/drivers/ata/pata_acpi.c b/drivers/ata/pata_acpi.c
new file mode 100644
index 000000000..b70fce2a3
--- /dev/null
+++ b/drivers/ata/pata_acpi.c
@@ -0,0 +1,280 @@
+/*
+ * ACPI PATA driver
+ *
+ * (c) 2007 Red Hat
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/pci.h>
+#include <linux/blkdev.h>
+#include <linux/delay.h>
+#include <linux/device.h>
+#include <linux/gfp.h>
+#include <linux/acpi.h>
+#include <linux/libata.h>
+#include <linux/ata.h>
+#include <scsi/scsi_host.h>
+
+#define DRV_NAME "pata_acpi"
+#define DRV_VERSION "0.2.3"
+
+struct pata_acpi {
+ struct ata_acpi_gtm gtm;
+ void *last;
+ unsigned long mask[2];
+};
+
+/**
+ * pacpi_pre_reset - check for 40/80 pin
+ * @ap: Port
+ * @deadline: deadline jiffies for the operation
+ *
+ * Perform the PATA port setup we need.
+ */
+
+static int pacpi_pre_reset(struct ata_link *link, unsigned long deadline)
+{
+ struct ata_port *ap = link->ap;
+ struct pata_acpi *acpi = ap->private_data;
+ if (ACPI_HANDLE(&ap->tdev) == NULL || ata_acpi_gtm(ap, &acpi->gtm) < 0)
+ return -ENODEV;
+
+ return ata_sff_prereset(link, deadline);
+}
+
+/**
+ * pacpi_cable_detect - cable type detection
+ * @ap: port to detect
+ *
+ * Perform device specific cable detection
+ */
+
+static int pacpi_cable_detect(struct ata_port *ap)
+{
+ struct pata_acpi *acpi = ap->private_data;
+
+ if ((acpi->mask[0] | acpi->mask[1]) & (0xF8 << ATA_SHIFT_UDMA))
+ return ATA_CBL_PATA80;
+ else
+ return ATA_CBL_PATA40;
+}
+
+/**
+ * pacpi_discover_modes - filter non ACPI modes
+ * @adev: ATA device
+ * @mask: proposed modes
+ *
+ * Try the modes available and see which ones the ACPI method will
+ * set up sensibly. From this we get a mask of ACPI modes we can use
+ */
+
+static unsigned long pacpi_discover_modes(struct ata_port *ap, struct ata_device *adev)
+{
+ struct pata_acpi *acpi = ap->private_data;
+ struct ata_acpi_gtm probe;
+ unsigned int xfer_mask;
+
+ probe = acpi->gtm;
+
+ ata_acpi_gtm(ap, &probe);
+
+ xfer_mask = ata_acpi_gtm_xfermask(adev, &probe);
+
+ if (xfer_mask & (0xF8 << ATA_SHIFT_UDMA))
+ ap->cbl = ATA_CBL_PATA80;
+
+ return xfer_mask;
+}
+
+/**
+ * pacpi_mode_filter - mode filter for ACPI
+ * @adev: device
+ * @mask: mask of valid modes
+ *
+ * Filter the valid mode list according to our own specific rules, in
+ * this case the list of discovered valid modes obtained by ACPI probing
+ */
+
+static unsigned long pacpi_mode_filter(struct ata_device *adev, unsigned long mask)
+{
+ struct pata_acpi *acpi = adev->link->ap->private_data;
+ return mask & acpi->mask[adev->devno];
+}
+
+/**
+ * pacpi_set_piomode - set initial PIO mode data
+ * @ap: ATA interface
+ * @adev: ATA device
+ */
+
+static void pacpi_set_piomode(struct ata_port *ap, struct ata_device *adev)
+{
+ int unit = adev->devno;
+ struct pata_acpi *acpi = ap->private_data;
+ const struct ata_timing *t;
+
+ if (!(acpi->gtm.flags & 0x10))
+ unit = 0;
+
+ /* Now stuff the nS values into the structure */
+ t = ata_timing_find_mode(adev->pio_mode);
+ acpi->gtm.drive[unit].pio = t->cycle;
+ ata_acpi_stm(ap, &acpi->gtm);
+ /* See what mode we actually got */
+ ata_acpi_gtm(ap, &acpi->gtm);
+}
+
+/**
+ * pacpi_set_dmamode - set initial DMA mode data
+ * @ap: ATA interface
+ * @adev: ATA device
+ */
+
+static void pacpi_set_dmamode(struct ata_port *ap, struct ata_device *adev)
+{
+ int unit = adev->devno;
+ struct pata_acpi *acpi = ap->private_data;
+ const struct ata_timing *t;
+
+ if (!(acpi->gtm.flags & 0x10))
+ unit = 0;
+
+ /* Now stuff the nS values into the structure */
+ t = ata_timing_find_mode(adev->dma_mode);
+ if (adev->dma_mode >= XFER_UDMA_0) {
+ acpi->gtm.drive[unit].dma = t->udma;
+ acpi->gtm.flags |= (1 << (2 * unit));
+ } else {
+ acpi->gtm.drive[unit].dma = t->cycle;
+ acpi->gtm.flags &= ~(1 << (2 * unit));
+ }
+ ata_acpi_stm(ap, &acpi->gtm);
+ /* See what mode we actually got */
+ ata_acpi_gtm(ap, &acpi->gtm);
+}
+
+/**
+ * pacpi_qc_issue - command issue
+ * @qc: command pending
+ *
+ * Called when the libata layer is about to issue a command. We wrap
+ * this interface so that we can load the correct ATA timings if
+ * necessary.
+ */
+
+static unsigned int pacpi_qc_issue(struct ata_queued_cmd *qc)
+{
+ struct ata_port *ap = qc->ap;
+ struct ata_device *adev = qc->dev;
+ struct pata_acpi *acpi = ap->private_data;
+
+ if (acpi->gtm.flags & 0x10)
+ return ata_bmdma_qc_issue(qc);
+
+ if (adev != acpi->last) {
+ pacpi_set_piomode(ap, adev);
+ if (ata_dma_enabled(adev))
+ pacpi_set_dmamode(ap, adev);
+ acpi->last = adev;
+ }
+ return ata_bmdma_qc_issue(qc);
+}
+
+/**
+ * pacpi_port_start - port setup
+ * @ap: ATA port being set up
+ *
+ * Use the port_start hook to maintain private control structures
+ */
+
+static int pacpi_port_start(struct ata_port *ap)
+{
+ struct pci_dev *pdev = to_pci_dev(ap->host->dev);
+ struct pata_acpi *acpi;
+
+ if (ACPI_HANDLE(&ap->tdev) == NULL)
+ return -ENODEV;
+
+ acpi = ap->private_data = devm_kzalloc(&pdev->dev, sizeof(struct pata_acpi), GFP_KERNEL);
+ if (ap->private_data == NULL)
+ return -ENOMEM;
+ acpi->mask[0] = pacpi_discover_modes(ap, &ap->link.device[0]);
+ acpi->mask[1] = pacpi_discover_modes(ap, &ap->link.device[1]);
+ return ata_bmdma_port_start(ap);
+}
+
+static struct scsi_host_template pacpi_sht = {
+ ATA_BMDMA_SHT(DRV_NAME),
+};
+
+static struct ata_port_operations pacpi_ops = {
+ .inherits = &ata_bmdma_port_ops,
+ .qc_issue = pacpi_qc_issue,
+ .cable_detect = pacpi_cable_detect,
+ .mode_filter = pacpi_mode_filter,
+ .set_piomode = pacpi_set_piomode,
+ .set_dmamode = pacpi_set_dmamode,
+ .prereset = pacpi_pre_reset,
+ .port_start = pacpi_port_start,
+};
+
+
+/**
+ * pacpi_init_one - Register ACPI ATA PCI device with kernel services
+ * @pdev: PCI device to register
+ * @ent: Entry in pacpi_pci_tbl matching with @pdev
+ *
+ * Called from kernel PCI layer.
+ *
+ * LOCKING:
+ * Inherited from PCI layer (may sleep).
+ *
+ * RETURNS:
+ * Zero on success, or -ERRNO value.
+ */
+
+static int pacpi_init_one (struct pci_dev *pdev, const struct pci_device_id *id)
+{
+ static const struct ata_port_info info = {
+ .flags = ATA_FLAG_SLAVE_POSS,
+
+ .pio_mask = ATA_PIO4,
+ .mwdma_mask = ATA_MWDMA2,
+ .udma_mask = ATA_UDMA6,
+
+ .port_ops = &pacpi_ops,
+ };
+ const struct ata_port_info *ppi[] = { &info, NULL };
+ if (pdev->vendor == PCI_VENDOR_ID_ATI) {
+ int rc = pcim_enable_device(pdev);
+ if (rc < 0)
+ return rc;
+ pcim_pin_device(pdev);
+ }
+ return ata_pci_bmdma_init_one(pdev, ppi, &pacpi_sht, NULL, 0);
+}
+
+static const struct pci_device_id pacpi_pci_tbl[] = {
+ { PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, PCI_CLASS_STORAGE_IDE << 8, 0xFFFFFF00UL, 1},
+ { } /* terminate list */
+};
+
+static struct pci_driver pacpi_pci_driver = {
+ .name = DRV_NAME,
+ .id_table = pacpi_pci_tbl,
+ .probe = pacpi_init_one,
+ .remove = ata_pci_remove_one,
+#ifdef CONFIG_PM_SLEEP
+ .suspend = ata_pci_device_suspend,
+ .resume = ata_pci_device_resume,
+#endif
+};
+
+module_pci_driver(pacpi_pci_driver);
+
+MODULE_AUTHOR("Alan Cox");
+MODULE_DESCRIPTION("SCSI low-level driver for ATA in ACPI mode");
+MODULE_LICENSE("GPL");
+MODULE_DEVICE_TABLE(pci, pacpi_pci_tbl);
+MODULE_VERSION(DRV_VERSION);