summaryrefslogtreecommitdiff
path: root/drivers/ata/pata_rz1000.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/ata/pata_rz1000.c')
-rw-r--r--drivers/ata/pata_rz1000.c148
1 files changed, 148 insertions, 0 deletions
diff --git a/drivers/ata/pata_rz1000.c b/drivers/ata/pata_rz1000.c
new file mode 100644
index 000000000..b3ec18c6b
--- /dev/null
+++ b/drivers/ata/pata_rz1000.c
@@ -0,0 +1,148 @@
+/*
+ * RZ1000/1001 driver based upon
+ *
+ * linux/drivers/ide/pci/rz1000.c Version 0.06 January 12, 2003
+ * Copyright (C) 1995-1998 Linus Torvalds & author (see below)
+ * Principal Author: mlord@pobox.com (Mark Lord)
+ *
+ * See linux/MAINTAINERS for address of current maintainer.
+ *
+ * This file provides support for disabling the buggy read-ahead
+ * mode of the RZ1000 IDE chipset, commonly used on Intel motherboards.
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/pci.h>
+#include <linux/blkdev.h>
+#include <linux/delay.h>
+#include <scsi/scsi_host.h>
+#include <linux/libata.h>
+
+#define DRV_NAME "pata_rz1000"
+#define DRV_VERSION "0.2.4"
+
+
+/**
+ * rz1000_set_mode - mode setting function
+ * @link: ATA link
+ * @unused: returned device on set_mode failure
+ *
+ * Use a non standard set_mode function. We don't want to be tuned. We
+ * would prefer to be BIOS generic but for the fact our hardware is
+ * whacked out.
+ */
+
+static int rz1000_set_mode(struct ata_link *link, struct ata_device **unused)
+{
+ struct ata_device *dev;
+
+ ata_for_each_dev(dev, link, ENABLED) {
+ /* We don't really care */
+ dev->pio_mode = XFER_PIO_0;
+ dev->xfer_mode = XFER_PIO_0;
+ dev->xfer_shift = ATA_SHIFT_PIO;
+ dev->flags |= ATA_DFLAG_PIO;
+ ata_dev_info(dev, "configured for PIO\n");
+ }
+ return 0;
+}
+
+
+static struct scsi_host_template rz1000_sht = {
+ ATA_PIO_SHT(DRV_NAME),
+};
+
+static struct ata_port_operations rz1000_port_ops = {
+ .inherits = &ata_sff_port_ops,
+ .cable_detect = ata_cable_40wire,
+ .set_mode = rz1000_set_mode,
+};
+
+static int rz1000_fifo_disable(struct pci_dev *pdev)
+{
+ u16 reg;
+ /* Be exceptionally paranoid as we must be sure to apply the fix */
+ if (pci_read_config_word(pdev, 0x40, &reg) != 0)
+ return -1;
+ reg &= 0xDFFF;
+ if (pci_write_config_word(pdev, 0x40, reg) != 0)
+ return -1;
+ printk(KERN_INFO DRV_NAME ": disabled chipset readahead.\n");
+ return 0;
+}
+
+/**
+ * rz1000_init_one - Register RZ1000 ATA PCI device with kernel services
+ * @pdev: PCI device to register
+ * @ent: Entry in rz1000_pci_tbl matching with @pdev
+ *
+ * Configure an RZ1000 interface. This doesn't require much special
+ * handling except that we *MUST* kill the chipset readahead or the
+ * user may experience data corruption.
+ */
+
+static int rz1000_init_one (struct pci_dev *pdev, const struct pci_device_id *ent)
+{
+ static const struct ata_port_info info = {
+ .flags = ATA_FLAG_SLAVE_POSS,
+ .pio_mask = ATA_PIO4,
+ .port_ops = &rz1000_port_ops
+ };
+ const struct ata_port_info *ppi[] = { &info, NULL };
+
+ ata_print_version_once(&pdev->dev, DRV_VERSION);
+
+ if (rz1000_fifo_disable(pdev) == 0)
+ return ata_pci_sff_init_one(pdev, ppi, &rz1000_sht, NULL, 0);
+
+ printk(KERN_ERR DRV_NAME ": failed to disable read-ahead on chipset..\n");
+ /* Not safe to use so skip */
+ return -ENODEV;
+}
+
+#ifdef CONFIG_PM_SLEEP
+static int rz1000_reinit_one(struct pci_dev *pdev)
+{
+ struct ata_host *host = pci_get_drvdata(pdev);
+ int rc;
+
+ rc = ata_pci_device_do_resume(pdev);
+ if (rc)
+ return rc;
+
+ /* If this fails on resume (which is a "can't happen" case), we
+ must stop as any progress risks data loss */
+ if (rz1000_fifo_disable(pdev))
+ panic("rz1000 fifo");
+
+ ata_host_resume(host);
+ return 0;
+}
+#endif
+
+static const struct pci_device_id pata_rz1000[] = {
+ { PCI_VDEVICE(PCTECH, PCI_DEVICE_ID_PCTECH_RZ1000), },
+ { PCI_VDEVICE(PCTECH, PCI_DEVICE_ID_PCTECH_RZ1001), },
+
+ { },
+};
+
+static struct pci_driver rz1000_pci_driver = {
+ .name = DRV_NAME,
+ .id_table = pata_rz1000,
+ .probe = rz1000_init_one,
+ .remove = ata_pci_remove_one,
+#ifdef CONFIG_PM_SLEEP
+ .suspend = ata_pci_device_suspend,
+ .resume = rz1000_reinit_one,
+#endif
+};
+
+module_pci_driver(rz1000_pci_driver);
+
+MODULE_AUTHOR("Alan Cox");
+MODULE_DESCRIPTION("low-level driver for RZ1000 PCI ATA");
+MODULE_LICENSE("GPL");
+MODULE_DEVICE_TABLE(pci, pata_rz1000);
+MODULE_VERSION(DRV_VERSION);