diff options
Diffstat (limited to 'drivers/ata/pata_sis.c')
| -rw-r--r-- | drivers/ata/pata_sis.c | 914 |
1 files changed, 914 insertions, 0 deletions
diff --git a/drivers/ata/pata_sis.c b/drivers/ata/pata_sis.c new file mode 100644 index 000000000..626f989d5 --- /dev/null +++ b/drivers/ata/pata_sis.c @@ -0,0 +1,914 @@ +/* + * pata_sis.c - SiS ATA driver + * + * (C) 2005 Red Hat + * (C) 2007,2009 Bartlomiej Zolnierkiewicz + * + * Based upon linux/drivers/ide/pci/sis5513.c + * Copyright (C) 1999-2000 Andre Hedrick <andre@linux-ide.org> + * Copyright (C) 2002 Lionel Bouton <Lionel.Bouton@inet6.fr>, Maintainer + * Copyright (C) 2003 Vojtech Pavlik <vojtech@suse.cz> + * SiS Taiwan : for direct support and hardware. + * Daniela Engert : for initial ATA100 advices and numerous others. + * John Fremlin, Manfred Spraul, Dave Morgan, Peter Kjellerstedt : + * for checking code correctness, providing patches. + * Original tests and design on the SiS620 chipset. + * ATA100 tests and design on the SiS735 chipset. + * ATA16/33 support from specs + * ATA133 support for SiS961/962 by L.C. Chang <lcchang@sis.com.tw> + * + * + * TODO + * Check MWDMA on drives that don't support MWDMA speed pio cycles ? + * More Testing + */ + +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/pci.h> +#include <linux/blkdev.h> +#include <linux/delay.h> +#include <linux/device.h> +#include <scsi/scsi_host.h> +#include <linux/libata.h> +#include <linux/ata.h> +#include "sis.h" + +#define DRV_NAME "pata_sis" +#define DRV_VERSION "0.5.2" + +struct sis_chipset { + u16 device; /* PCI host ID */ + const struct ata_port_info *info; /* Info block */ + /* Probably add family, cable detect type etc here to clean + up code later */ +}; + +struct sis_laptop { + u16 device; + u16 subvendor; + u16 subdevice; +}; + +static const struct sis_laptop sis_laptop[] = { + /* devid, subvendor, subdev */ + { 0x5513, 0x1043, 0x1107 }, /* ASUS A6K */ + { 0x5513, 0x1734, 0x105F }, /* FSC Amilo A1630 */ + { 0x5513, 0x1071, 0x8640 }, /* EasyNote K5305 */ + /* end marker */ + { 0, } +}; + +static int sis_short_ata40(struct pci_dev *dev) +{ + const struct sis_laptop *lap = &sis_laptop[0]; + + while (lap->device) { + if (lap->device == dev->device && + lap->subvendor == dev->subsystem_vendor && + lap->subdevice == dev->subsystem_device) + return 1; + lap++; + } + + return 0; +} + +/** + * sis_old_port_base - return PCI configuration base for dev + * @adev: device + * + * Returns the base of the PCI configuration registers for this port + * number. + */ + +static int sis_old_port_base(struct ata_device *adev) +{ + return 0x40 + (4 * adev->link->ap->port_no) + (2 * adev->devno); +} + +/** + * sis_port_base - return PCI configuration base for dev + * @adev: device + * + * Returns the base of the PCI configuration registers for this port + * number. + */ + +static int sis_port_base(struct ata_device *adev) +{ + struct ata_port *ap = adev->link->ap; + struct pci_dev *pdev = to_pci_dev(ap->host->dev); + int port = 0x40; + u32 reg54; + + /* If bit 30 is set then the registers are mapped at 0x70 not 0x40 */ + pci_read_config_dword(pdev, 0x54, ®54); + if (reg54 & 0x40000000) + port = 0x70; + + return port + (8 * ap->port_no) + (4 * adev->devno); +} + +/** + * sis_133_cable_detect - check for 40/80 pin + * @ap: Port + * @deadline: deadline jiffies for the operation + * + * Perform cable detection for the later UDMA133 capable + * SiS chipset. + */ + +static int sis_133_cable_detect(struct ata_port *ap) +{ + struct pci_dev *pdev = to_pci_dev(ap->host->dev); + u16 tmp; + + /* The top bit of this register is the cable detect bit */ + pci_read_config_word(pdev, 0x50 + 2 * ap->port_no, &tmp); + if ((tmp & 0x8000) && !sis_short_ata40(pdev)) + return ATA_CBL_PATA40; + return ATA_CBL_PATA80; +} + +/** + * sis_66_cable_detect - check for 40/80 pin + * @ap: Port + * + * Perform cable detection on the UDMA66, UDMA100 and early UDMA133 + * SiS IDE controllers. + */ + +static int sis_66_cable_detect(struct ata_port *ap) +{ + struct pci_dev *pdev = to_pci_dev(ap->host->dev); + u8 tmp; + + /* Older chips keep cable detect in bits 4/5 of reg 0x48 */ + pci_read_config_byte(pdev, 0x48, &tmp); + tmp >>= ap->port_no; + if ((tmp & 0x10) && !sis_short_ata40(pdev)) + return ATA_CBL_PATA40; + return ATA_CBL_PATA80; +} + + +/** + * sis_pre_reset - probe begin + * @link: ATA link + * @deadline: deadline jiffies for the operation + * + * Set up cable type and use generic probe init + */ + +static int sis_pre_reset(struct ata_link *link, unsigned long deadline) +{ + static const struct pci_bits sis_enable_bits[] = { + { 0x4aU, 1U, 0x02UL, 0x02UL }, /* port 0 */ + { 0x4aU, 1U, 0x04UL, 0x04UL }, /* port 1 */ + }; + + struct ata_port *ap = link->ap; + struct pci_dev *pdev = to_pci_dev(ap->host->dev); + + if (!pci_test_config_bits(pdev, &sis_enable_bits[ap->port_no])) + return -ENOENT; + + /* Clear the FIFO settings. We can't enable the FIFO until + we know we are poking at a disk */ + pci_write_config_byte(pdev, 0x4B, 0); + return ata_sff_prereset(link, deadline); +} + + +/** + * sis_set_fifo - Set RWP fifo bits for this device + * @ap: Port + * @adev: Device + * + * SIS chipsets implement prefetch/postwrite bits for each device + * on both channels. This functionality is not ATAPI compatible and + * must be configured according to the class of device present + */ + +static void sis_set_fifo(struct ata_port *ap, struct ata_device *adev) +{ + struct pci_dev *pdev = to_pci_dev(ap->host->dev); + u8 fifoctrl; + u8 mask = 0x11; + + mask <<= (2 * ap->port_no); + mask <<= adev->devno; + + /* This holds various bits including the FIFO control */ + pci_read_config_byte(pdev, 0x4B, &fifoctrl); + fifoctrl &= ~mask; + + /* Enable for ATA (disk) only */ + if (adev->class == ATA_DEV_ATA) + fifoctrl |= mask; + pci_write_config_byte(pdev, 0x4B, fifoctrl); +} + +/** + * sis_old_set_piomode - Initialize host controller PATA PIO timings + * @ap: Port whose timings we are configuring + * @adev: Device we are configuring for. + * + * Set PIO mode for device, in host controller PCI config space. This + * function handles PIO set up for all chips that are pre ATA100 and + * also early ATA100 devices. + * + * LOCKING: + * None (inherited from caller). + */ + +static void sis_old_set_piomode (struct ata_port *ap, struct ata_device *adev) +{ + struct pci_dev *pdev = to_pci_dev(ap->host->dev); + int port = sis_old_port_base(adev); + u8 t1, t2; + int speed = adev->pio_mode - XFER_PIO_0; + + static const u8 active[] = { 0x00, 0x07, 0x04, 0x03, 0x01 }; + static const u8 recovery[] = { 0x00, 0x06, 0x04, 0x03, 0x03 }; + + sis_set_fifo(ap, adev); + + pci_read_config_byte(pdev, port, &t1); + pci_read_config_byte(pdev, port + 1, &t2); + + t1 &= ~0x0F; /* Clear active/recovery timings */ + t2 &= ~0x07; + + t1 |= active[speed]; + t2 |= recovery[speed]; + + pci_write_config_byte(pdev, port, t1); + pci_write_config_byte(pdev, port + 1, t2); +} + +/** + * sis_100_set_piomode - Initialize host controller PATA PIO timings + * @ap: Port whose timings we are configuring + * @adev: Device we are configuring for. + * + * Set PIO mode for device, in host controller PCI config space. This + * function handles PIO set up for ATA100 devices and early ATA133. + * + * LOCKING: + * None (inherited from caller). + */ + +static void sis_100_set_piomode (struct ata_port *ap, struct ata_device *adev) +{ + struct pci_dev *pdev = to_pci_dev(ap->host->dev); + int port = sis_old_port_base(adev); + int speed = adev->pio_mode - XFER_PIO_0; + + static const u8 actrec[] = { 0x00, 0x67, 0x44, 0x33, 0x31 }; + + sis_set_fifo(ap, adev); + + pci_write_config_byte(pdev, port, actrec[speed]); +} + +/** + * sis_133_set_piomode - Initialize host controller PATA PIO timings + * @ap: Port whose timings we are configuring + * @adev: Device we are configuring for. + * + * Set PIO mode for device, in host controller PCI config space. This + * function handles PIO set up for the later ATA133 devices. + * + * LOCKING: + * None (inherited from caller). + */ + +static void sis_133_set_piomode (struct ata_port *ap, struct ata_device *adev) +{ + struct pci_dev *pdev = to_pci_dev(ap->host->dev); + int port; + u32 t1; + int speed = adev->pio_mode - XFER_PIO_0; + + static const u32 timing133[] = { + 0x28269000, /* Recovery << 24 | Act << 16 | Ini << 12 */ + 0x0C266000, + 0x04263000, + 0x0C0A3000, + 0x05093000 + }; + static const u32 timing100[] = { + 0x1E1C6000, /* Recovery << 24 | Act << 16 | Ini << 12 */ + 0x091C4000, + 0x031C2000, + 0x09072000, + 0x04062000 + }; + + sis_set_fifo(ap, adev); + + port = sis_port_base(adev); + pci_read_config_dword(pdev, port, &t1); + t1 &= 0xC0C00FFF; /* Mask out timing */ + + if (t1 & 0x08) /* 100 or 133 ? */ + t1 |= timing133[speed]; + else + t1 |= timing100[speed]; + pci_write_config_byte(pdev, port, t1); +} + +/** + * sis_old_set_dmamode - Initialize host controller PATA DMA timings + * @ap: Port whose timings we are configuring + * @adev: Device to program + * + * Set UDMA/MWDMA mode for device, in host controller PCI config space. + * Handles pre UDMA and UDMA33 devices. Supports MWDMA as well unlike + * the old ide/pci driver. + * + * LOCKING: + * None (inherited from caller). + */ + +static void sis_old_set_dmamode (struct ata_port *ap, struct ata_device *adev) +{ + struct pci_dev *pdev = to_pci_dev(ap->host->dev); + int speed = adev->dma_mode - XFER_MW_DMA_0; + int drive_pci = sis_old_port_base(adev); + u16 timing; + + static const u16 mwdma_bits[] = { 0x008, 0x302, 0x301 }; + static const u16 udma_bits[] = { 0xE000, 0xC000, 0xA000 }; + + pci_read_config_word(pdev, drive_pci, &timing); + + if (adev->dma_mode < XFER_UDMA_0) { + /* bits 3-0 hold recovery timing bits 8-10 active timing and + the higher bits are dependent on the device */ + timing &= ~0x870F; + timing |= mwdma_bits[speed]; + } else { + /* Bit 15 is UDMA on/off, bit 13-14 are cycle time */ + speed = adev->dma_mode - XFER_UDMA_0; + timing &= ~0x6000; + timing |= udma_bits[speed]; + } + pci_write_config_word(pdev, drive_pci, timing); +} + +/** + * sis_66_set_dmamode - Initialize host controller PATA DMA timings + * @ap: Port whose timings we are configuring + * @adev: Device to program + * + * Set UDMA/MWDMA mode for device, in host controller PCI config space. + * Handles UDMA66 and early UDMA100 devices. Supports MWDMA as well unlike + * the old ide/pci driver. + * + * LOCKING: + * None (inherited from caller). + */ + +static void sis_66_set_dmamode (struct ata_port *ap, struct ata_device *adev) +{ + struct pci_dev *pdev = to_pci_dev(ap->host->dev); + int speed = adev->dma_mode - XFER_MW_DMA_0; + int drive_pci = sis_old_port_base(adev); + u16 timing; + + /* MWDMA 0-2 and UDMA 0-5 */ + static const u16 mwdma_bits[] = { 0x008, 0x302, 0x301 }; + static const u16 udma_bits[] = { 0xF000, 0xD000, 0xB000, 0xA000, 0x9000, 0x8000 }; + + pci_read_config_word(pdev, drive_pci, &timing); + + if (adev->dma_mode < XFER_UDMA_0) { + /* bits 3-0 hold recovery timing bits 8-10 active timing and + the higher bits are dependent on the device, bit 15 udma */ + timing &= ~0x870F; + timing |= mwdma_bits[speed]; + } else { + /* Bit 15 is UDMA on/off, bit 12-14 are cycle time */ + speed = adev->dma_mode - XFER_UDMA_0; + timing &= ~0xF000; + timing |= udma_bits[speed]; + } + pci_write_config_word(pdev, drive_pci, timing); +} + +/** + * sis_100_set_dmamode - Initialize host controller PATA DMA timings + * @ap: Port whose timings we are configuring + * @adev: Device to program + * + * Set UDMA/MWDMA mode for device, in host controller PCI config space. + * Handles UDMA66 and early UDMA100 devices. + * + * LOCKING: + * None (inherited from caller). + */ + +static void sis_100_set_dmamode (struct ata_port *ap, struct ata_device *adev) +{ + struct pci_dev *pdev = to_pci_dev(ap->host->dev); + int speed = adev->dma_mode - XFER_MW_DMA_0; + int drive_pci = sis_old_port_base(adev); + u8 timing; + + static const u8 udma_bits[] = { 0x8B, 0x87, 0x85, 0x83, 0x82, 0x81}; + + pci_read_config_byte(pdev, drive_pci + 1, &timing); + + if (adev->dma_mode < XFER_UDMA_0) { + /* NOT SUPPORTED YET: NEED DATA SHEET. DITTO IN OLD DRIVER */ + } else { + /* Bit 7 is UDMA on/off, bit 0-3 are cycle time */ + speed = adev->dma_mode - XFER_UDMA_0; + timing &= ~0x8F; + timing |= udma_bits[speed]; + } + pci_write_config_byte(pdev, drive_pci + 1, timing); +} + +/** + * sis_133_early_set_dmamode - Initialize host controller PATA DMA timings + * @ap: Port whose timings we are configuring + * @adev: Device to program + * + * Set UDMA/MWDMA mode for device, in host controller PCI config space. + * Handles early SiS 961 bridges. + * + * LOCKING: + * None (inherited from caller). + */ + +static void sis_133_early_set_dmamode (struct ata_port *ap, struct ata_device *adev) +{ + struct pci_dev *pdev = to_pci_dev(ap->host->dev); + int speed = adev->dma_mode - XFER_MW_DMA_0; + int drive_pci = sis_old_port_base(adev); + u8 timing; + /* Low 4 bits are timing */ + static const u8 udma_bits[] = { 0x8F, 0x8A, 0x87, 0x85, 0x83, 0x82, 0x81}; + + pci_read_config_byte(pdev, drive_pci + 1, &timing); + + if (adev->dma_mode < XFER_UDMA_0) { + /* NOT SUPPORTED YET: NEED DATA SHEET. DITTO IN OLD DRIVER */ + } else { + /* Bit 7 is UDMA on/off, bit 0-3 are cycle time */ + speed = adev->dma_mode - XFER_UDMA_0; + timing &= ~0x8F; + timing |= udma_bits[speed]; + } + pci_write_config_byte(pdev, drive_pci + 1, timing); +} + +/** + * sis_133_set_dmamode - Initialize host controller PATA DMA timings + * @ap: Port whose timings we are configuring + * @adev: Device to program + * + * Set UDMA/MWDMA mode for device, in host controller PCI config space. + * + * LOCKING: + * None (inherited from caller). + */ + +static void sis_133_set_dmamode (struct ata_port *ap, struct ata_device *adev) +{ + struct pci_dev *pdev = to_pci_dev(ap->host->dev); + int port; + u32 t1; + + port = sis_port_base(adev); + pci_read_config_dword(pdev, port, &t1); + + if (adev->dma_mode < XFER_UDMA_0) { + /* Recovery << 24 | Act << 16 | Ini << 12, like PIO modes */ + static const u32 timing_u100[] = { 0x19154000, 0x06072000, 0x04062000 }; + static const u32 timing_u133[] = { 0x221C6000, 0x0C0A3000, 0x05093000 }; + int speed = adev->dma_mode - XFER_MW_DMA_0; + + t1 &= 0xC0C00FFF; + /* disable UDMA */ + t1 &= ~0x00000004; + if (t1 & 0x08) + t1 |= timing_u133[speed]; + else + t1 |= timing_u100[speed]; + } else { + /* bits 4- cycle time 8 - cvs time */ + static const u32 timing_u100[] = { 0x6B0, 0x470, 0x350, 0x140, 0x120, 0x110, 0x000 }; + static const u32 timing_u133[] = { 0x9F0, 0x6A0, 0x470, 0x250, 0x230, 0x220, 0x210 }; + int speed = adev->dma_mode - XFER_UDMA_0; + + t1 &= ~0x00000FF0; + /* enable UDMA */ + t1 |= 0x00000004; + if (t1 & 0x08) + t1 |= timing_u133[speed]; + else + t1 |= timing_u100[speed]; + } + pci_write_config_dword(pdev, port, t1); +} + +/** + * sis_133_mode_filter - mode selection filter + * @adev: ATA device + * + * Block UDMA6 on devices that do not support it. + */ + +static unsigned long sis_133_mode_filter(struct ata_device *adev, unsigned long mask) +{ + struct ata_port *ap = adev->link->ap; + struct pci_dev *pdev = to_pci_dev(ap->host->dev); + int port = sis_port_base(adev); + u32 t1; + + pci_read_config_dword(pdev, port, &t1); + /* if ATA133 is disabled, mask it out */ + if (!(t1 & 0x08)) + mask &= ~(0xC0 << ATA_SHIFT_UDMA); + return mask; +} + +static struct scsi_host_template sis_sht = { + ATA_BMDMA_SHT(DRV_NAME), +}; + +static struct ata_port_operations sis_133_for_sata_ops = { + .inherits = &ata_bmdma_port_ops, + .set_piomode = sis_133_set_piomode, + .set_dmamode = sis_133_set_dmamode, + .cable_detect = sis_133_cable_detect, +}; + +static struct ata_port_operations sis_base_ops = { + .inherits = &ata_bmdma_port_ops, + .prereset = sis_pre_reset, +}; + +static struct ata_port_operations sis_133_ops = { + .inherits = &sis_base_ops, + .set_piomode = sis_133_set_piomode, + .set_dmamode = sis_133_set_dmamode, + .cable_detect = sis_133_cable_detect, + .mode_filter = sis_133_mode_filter, +}; + +static struct ata_port_operations sis_133_early_ops = { + .inherits = &sis_base_ops, + .set_piomode = sis_100_set_piomode, + .set_dmamode = sis_133_early_set_dmamode, + .cable_detect = sis_66_cable_detect, +}; + +static struct ata_port_operations sis_100_ops = { + .inherits = &sis_base_ops, + .set_piomode = sis_100_set_piomode, + .set_dmamode = sis_100_set_dmamode, + .cable_detect = sis_66_cable_detect, +}; + +static struct ata_port_operations sis_66_ops = { + .inherits = &sis_base_ops, + .set_piomode = sis_old_set_piomode, + .set_dmamode = sis_66_set_dmamode, + .cable_detect = sis_66_cable_detect, +}; + +static struct ata_port_operations sis_old_ops = { + .inherits = &sis_base_ops, + .set_piomode = sis_old_set_piomode, + .set_dmamode = sis_old_set_dmamode, + .cable_detect = ata_cable_40wire, +}; + +static const struct ata_port_info sis_info = { + .flags = ATA_FLAG_SLAVE_POSS, + .pio_mask = ATA_PIO4, + .mwdma_mask = ATA_MWDMA2, + /* No UDMA */ + .port_ops = &sis_old_ops, +}; +static const struct ata_port_info sis_info33 = { + .flags = ATA_FLAG_SLAVE_POSS, + .pio_mask = ATA_PIO4, + .mwdma_mask = ATA_MWDMA2, + .udma_mask = ATA_UDMA2, + .port_ops = &sis_old_ops, +}; +static const struct ata_port_info sis_info66 = { + .flags = ATA_FLAG_SLAVE_POSS, + .pio_mask = ATA_PIO4, + /* No MWDMA */ + .udma_mask = ATA_UDMA4, + .port_ops = &sis_66_ops, +}; +static const struct ata_port_info sis_info100 = { + .flags = ATA_FLAG_SLAVE_POSS, + .pio_mask = ATA_PIO4, + /* No MWDMA */ + .udma_mask = ATA_UDMA5, + .port_ops = &sis_100_ops, +}; +static const struct ata_port_info sis_info100_early = { + .flags = ATA_FLAG_SLAVE_POSS, + .pio_mask = ATA_PIO4, + /* No MWDMA */ + .udma_mask = ATA_UDMA5, + .port_ops = &sis_66_ops, +}; +static const struct ata_port_info sis_info133 = { + .flags = ATA_FLAG_SLAVE_POSS, + .pio_mask = ATA_PIO4, + .mwdma_mask = ATA_MWDMA2, + .udma_mask = ATA_UDMA6, + .port_ops = &sis_133_ops, +}; +const struct ata_port_info sis_info133_for_sata = { + .flags = ATA_FLAG_SLAVE_POSS, + .pio_mask = ATA_PIO4, + /* No MWDMA */ + .udma_mask = ATA_UDMA6, + .port_ops = &sis_133_for_sata_ops, +}; +static const struct ata_port_info sis_info133_early = { + .flags = ATA_FLAG_SLAVE_POSS, + .pio_mask = ATA_PIO4, + /* No MWDMA */ + .udma_mask = ATA_UDMA6, + .port_ops = &sis_133_early_ops, +}; + +/* Privately shared with the SiS180 SATA driver, not for use elsewhere */ +EXPORT_SYMBOL_GPL(sis_info133_for_sata); + +static void sis_fixup(struct pci_dev *pdev, struct sis_chipset *sis) +{ + u16 regw; + u8 reg; + + if (sis->info == &sis_info133) { + pci_read_config_word(pdev, 0x50, ®w); + if (regw & 0x08) + pci_write_config_word(pdev, 0x50, regw & ~0x08); + pci_read_config_word(pdev, 0x52, ®w); + if (regw & 0x08) + pci_write_config_word(pdev, 0x52, regw & ~0x08); + return; + } + + if (sis->info == &sis_info133_early || sis->info == &sis_info100) { + /* Fix up latency */ + pci_write_config_byte(pdev, PCI_LATENCY_TIMER, 0x80); + /* Set compatibility bit */ + pci_read_config_byte(pdev, 0x49, ®); + if (!(reg & 0x01)) + pci_write_config_byte(pdev, 0x49, reg | 0x01); + return; + } + + if (sis->info == &sis_info66 || sis->info == &sis_info100_early) { + /* Fix up latency */ + pci_write_config_byte(pdev, PCI_LATENCY_TIMER, 0x80); + /* Set compatibility bit */ + pci_read_config_byte(pdev, 0x52, ®); + if (!(reg & 0x04)) + pci_write_config_byte(pdev, 0x52, reg | 0x04); + return; + } + + if (sis->info == &sis_info33) { + pci_read_config_byte(pdev, PCI_CLASS_PROG, ®); + if (( reg & 0x0F ) != 0x00) + pci_write_config_byte(pdev, PCI_CLASS_PROG, reg & 0xF0); + /* Fall through to ATA16 fixup below */ + } + + if (sis->info == &sis_info || sis->info == &sis_info33) { + /* force per drive recovery and active timings + needed on ATA_33 and below chips */ + pci_read_config_byte(pdev, 0x52, ®); + if (!(reg & 0x08)) + pci_write_config_byte(pdev, 0x52, reg|0x08); + return; + } + + BUG(); +} + +/** + * sis_init_one - Register SiS ATA PCI device with kernel services + * @pdev: PCI device to register + * @ent: Entry in sis_pci_tbl matching with @pdev + * + * Called from kernel PCI layer. We probe for combined mode (sigh), + * and then hand over control to libata, for it to do the rest. + * + * LOCKING: + * Inherited from PCI layer (may sleep). + * + * RETURNS: + * Zero on success, or -ERRNO value. + */ + +static int sis_init_one (struct pci_dev *pdev, const struct pci_device_id *ent) +{ + const struct ata_port_info *ppi[] = { NULL, NULL }; + struct pci_dev *host = NULL; + struct sis_chipset *chipset = NULL; + struct sis_chipset *sets; + int rc; + + static struct sis_chipset sis_chipsets[] = { + + { 0x0968, &sis_info133 }, + { 0x0966, &sis_info133 }, + { 0x0965, &sis_info133 }, + { 0x0745, &sis_info100 }, + { 0x0735, &sis_info100 }, + { 0x0733, &sis_info100 }, + { 0x0635, &sis_info100 }, + { 0x0633, &sis_info100 }, + + { 0x0730, &sis_info100_early }, /* 100 with ATA 66 layout */ + { 0x0550, &sis_info100_early }, /* 100 with ATA 66 layout */ + + { 0x0640, &sis_info66 }, + { 0x0630, &sis_info66 }, + { 0x0620, &sis_info66 }, + { 0x0540, &sis_info66 }, + { 0x0530, &sis_info66 }, + + { 0x5600, &sis_info33 }, + { 0x5598, &sis_info33 }, + { 0x5597, &sis_info33 }, + { 0x5591, &sis_info33 }, + { 0x5582, &sis_info33 }, + { 0x5581, &sis_info33 }, + + { 0x5596, &sis_info }, + { 0x5571, &sis_info }, + { 0x5517, &sis_info }, + { 0x5511, &sis_info }, + + {0} + }; + static struct sis_chipset sis133_early = { + 0x0, &sis_info133_early + }; + static struct sis_chipset sis133 = { + 0x0, &sis_info133 + }; + static struct sis_chipset sis100_early = { + 0x0, &sis_info100_early + }; + static struct sis_chipset sis100 = { + 0x0, &sis_info100 + }; + + ata_print_version_once(&pdev->dev, DRV_VERSION); + + rc = pcim_enable_device(pdev); + if (rc) + return rc; + + /* We have to find the bridge first */ + for (sets = &sis_chipsets[0]; sets->device; sets++) { + host = pci_get_device(PCI_VENDOR_ID_SI, sets->device, NULL); + if (host != NULL) { + chipset = sets; /* Match found */ + if (sets->device == 0x630) { /* SIS630 */ + if (host->revision >= 0x30) /* 630 ET */ + chipset = &sis100_early; + } + break; + } + } + + /* Look for concealed bridges */ + if (chipset == NULL) { + /* Second check */ + u32 idemisc; + u16 trueid; + + /* Disable ID masking and register remapping then + see what the real ID is */ + + pci_read_config_dword(pdev, 0x54, &idemisc); + pci_write_config_dword(pdev, 0x54, idemisc & 0x7fffffff); + pci_read_config_word(pdev, PCI_DEVICE_ID, &trueid); + pci_write_config_dword(pdev, 0x54, idemisc); + + switch(trueid) { + case 0x5518: /* SIS 962/963 */ + dev_info(&pdev->dev, + "SiS 962/963 MuTIOL IDE UDMA133 controller\n"); + chipset = &sis133; + if ((idemisc & 0x40000000) == 0) { + pci_write_config_dword(pdev, 0x54, idemisc | 0x40000000); + dev_info(&pdev->dev, + "Switching to 5513 register mapping\n"); + } + break; + case 0x0180: /* SIS 965/965L */ + chipset = &sis133; + break; + case 0x1180: /* SIS 966/966L */ + chipset = &sis133; + break; + } + } + + /* Further check */ + if (chipset == NULL) { + struct pci_dev *lpc_bridge; + u16 trueid; + u8 prefctl; + u8 idecfg; + + /* Try the second unmasking technique */ + pci_read_config_byte(pdev, 0x4a, &idecfg); + pci_write_config_byte(pdev, 0x4a, idecfg | 0x10); + pci_read_config_word(pdev, PCI_DEVICE_ID, &trueid); + pci_write_config_byte(pdev, 0x4a, idecfg); + + switch(trueid) { + case 0x5517: + lpc_bridge = pci_get_slot(pdev->bus, 0x10); /* Bus 0 Dev 2 Fn 0 */ + if (lpc_bridge == NULL) + break; + pci_read_config_byte(pdev, 0x49, &prefctl); + pci_dev_put(lpc_bridge); + + if (lpc_bridge->revision == 0x10 && (prefctl & 0x80)) { + chipset = &sis133_early; + break; + } + chipset = &sis100; + break; + } + } + pci_dev_put(host); + + /* No chipset info, no support */ + if (chipset == NULL) + return -ENODEV; + + ppi[0] = chipset->info; + + sis_fixup(pdev, chipset); + + return ata_pci_bmdma_init_one(pdev, ppi, &sis_sht, chipset, 0); +} + +#ifdef CONFIG_PM_SLEEP +static int sis_reinit_one(struct pci_dev *pdev) +{ + struct ata_host *host = pci_get_drvdata(pdev); + int rc; + + rc = ata_pci_device_do_resume(pdev); + if (rc) + return rc; + + sis_fixup(pdev, host->private_data); + + ata_host_resume(host); + return 0; +} +#endif + +static const struct pci_device_id sis_pci_tbl[] = { + { PCI_VDEVICE(SI, 0x5513), }, /* SiS 5513 */ + { PCI_VDEVICE(SI, 0x5518), }, /* SiS 5518 */ + { PCI_VDEVICE(SI, 0x1180), }, /* SiS 1180 */ + + { } +}; + +static struct pci_driver sis_pci_driver = { + .name = DRV_NAME, + .id_table = sis_pci_tbl, + .probe = sis_init_one, + .remove = ata_pci_remove_one, +#ifdef CONFIG_PM_SLEEP + .suspend = ata_pci_device_suspend, + .resume = sis_reinit_one, +#endif +}; + +module_pci_driver(sis_pci_driver); + +MODULE_AUTHOR("Alan Cox"); +MODULE_DESCRIPTION("SCSI low-level driver for SiS ATA"); +MODULE_LICENSE("GPL"); +MODULE_DEVICE_TABLE(pci, sis_pci_tbl); +MODULE_VERSION(DRV_VERSION); |