summaryrefslogtreecommitdiff
path: root/drivers/base/dd.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/base/dd.c')
-rw-r--r--drivers/base/dd.c163
1 files changed, 143 insertions, 20 deletions
diff --git a/drivers/base/dd.c b/drivers/base/dd.c
index e843fdbe4..a638bbb1a 100644
--- a/drivers/base/dd.c
+++ b/drivers/base/dd.c
@@ -141,7 +141,7 @@ static bool driver_deferred_probe_enable = false;
* more than one device is probing at the same time, it is possible for one
* probe to complete successfully while another is about to defer. If the second
* depends on the first, then it will get put on the pending list after the
- * trigger event has already occured and will be stuck there.
+ * trigger event has already occurred and will be stuck there.
*
* The atomic 'deferred_trigger_count' is used to determine if a successful
* trigger has occurred in the midst of probing a driver. If the trigger count
@@ -417,31 +417,107 @@ int driver_probe_device(struct device_driver *drv, struct device *dev)
return ret;
}
-static int __device_attach(struct device_driver *drv, void *data)
+bool driver_allows_async_probing(struct device_driver *drv)
{
- struct device *dev = data;
+ switch (drv->probe_type) {
+ case PROBE_PREFER_ASYNCHRONOUS:
+ return true;
+
+ case PROBE_FORCE_SYNCHRONOUS:
+ return false;
+
+ default:
+ if (module_requested_async_probing(drv->owner))
+ return true;
+
+ return false;
+ }
+}
+
+struct device_attach_data {
+ struct device *dev;
+
+ /*
+ * Indicates whether we are are considering asynchronous probing or
+ * not. Only initial binding after device or driver registration
+ * (including deferral processing) may be done asynchronously, the
+ * rest is always synchronous, as we expect it is being done by
+ * request from userspace.
+ */
+ bool check_async;
+
+ /*
+ * Indicates if we are binding synchronous or asynchronous drivers.
+ * When asynchronous probing is enabled we'll execute 2 passes
+ * over drivers: first pass doing synchronous probing and second
+ * doing asynchronous probing (if synchronous did not succeed -
+ * most likely because there was no driver requiring synchronous
+ * probing - and we found asynchronous driver during first pass).
+ * The 2 passes are done because we can't shoot asynchronous
+ * probe for given device and driver from bus_for_each_drv() since
+ * driver pointer is not guaranteed to stay valid once
+ * bus_for_each_drv() iterates to the next driver on the bus.
+ */
+ bool want_async;
+
+ /*
+ * We'll set have_async to 'true' if, while scanning for matching
+ * driver, we'll encounter one that requests asynchronous probing.
+ */
+ bool have_async;
+};
+
+static int __device_attach_driver(struct device_driver *drv, void *_data)
+{
+ struct device_attach_data *data = _data;
+ struct device *dev = data->dev;
+ bool async_allowed;
+
+ /*
+ * Check if device has already been claimed. This may
+ * happen with driver loading, device discovery/registration,
+ * and deferred probe processing happens all at once with
+ * multiple threads.
+ */
+ if (dev->driver)
+ return -EBUSY;
if (!driver_match_device(drv, dev))
return 0;
+ async_allowed = driver_allows_async_probing(drv);
+
+ if (async_allowed)
+ data->have_async = true;
+
+ if (data->check_async && async_allowed != data->want_async)
+ return 0;
+
return driver_probe_device(drv, dev);
}
-/**
- * device_attach - try to attach device to a driver.
- * @dev: device.
- *
- * Walk the list of drivers that the bus has and call
- * driver_probe_device() for each pair. If a compatible
- * pair is found, break out and return.
- *
- * Returns 1 if the device was bound to a driver;
- * 0 if no matching driver was found;
- * -ENODEV if the device is not registered.
- *
- * When called for a USB interface, @dev->parent lock must be held.
- */
-int device_attach(struct device *dev)
+static void __device_attach_async_helper(void *_dev, async_cookie_t cookie)
+{
+ struct device *dev = _dev;
+ struct device_attach_data data = {
+ .dev = dev,
+ .check_async = true,
+ .want_async = true,
+ };
+
+ device_lock(dev);
+
+ bus_for_each_drv(dev->bus, NULL, &data, __device_attach_driver);
+ dev_dbg(dev, "async probe completed\n");
+
+ pm_request_idle(dev);
+
+ device_unlock(dev);
+
+ put_device(dev);
+}
+
+static int __device_attach(struct device *dev, bool allow_async)
{
int ret = 0;
@@ -459,15 +535,59 @@ int device_attach(struct device *dev)
ret = 0;
}
} else {
- ret = bus_for_each_drv(dev->bus, NULL, dev, __device_attach);
- pm_request_idle(dev);
+ struct device_attach_data data = {
+ .dev = dev,
+ .check_async = allow_async,
+ .want_async = false,
+ };
+
+ ret = bus_for_each_drv(dev->bus, NULL, &data,
+ __device_attach_driver);
+ if (!ret && allow_async && data.have_async) {
+ /*
+ * If we could not find appropriate driver
+ * synchronously and we are allowed to do
+ * async probes and there are drivers that
+ * want to probe asynchronously, we'll
+ * try them.
+ */
+ dev_dbg(dev, "scheduling asynchronous probe\n");
+ get_device(dev);
+ async_schedule(__device_attach_async_helper, dev);
+ } else {
+ pm_request_idle(dev);
+ }
}
out_unlock:
device_unlock(dev);
return ret;
}
+
+/**
+ * device_attach - try to attach device to a driver.
+ * @dev: device.
+ *
+ * Walk the list of drivers that the bus has and call
+ * driver_probe_device() for each pair. If a compatible
+ * pair is found, break out and return.
+ *
+ * Returns 1 if the device was bound to a driver;
+ * 0 if no matching driver was found;
+ * -ENODEV if the device is not registered.
+ *
+ * When called for a USB interface, @dev->parent lock must be held.
+ */
+int device_attach(struct device *dev)
+{
+ return __device_attach(dev, false);
+}
EXPORT_SYMBOL_GPL(device_attach);
+void device_initial_probe(struct device *dev)
+{
+ __device_attach(dev, true);
+}
+
static int __driver_attach(struct device *dev, void *data)
{
struct device_driver *drv = data;
@@ -522,6 +642,9 @@ static void __device_release_driver(struct device *dev)
drv = dev->driver;
if (drv) {
+ if (driver_allows_async_probing(drv))
+ async_synchronize_full();
+
pm_runtime_get_sync(dev);
driver_sysfs_remove(dev);