1 files changed, 280 insertions, 0 deletions
diff --git a/drivers/base/dma-contiguous.c b/drivers/base/dma-contiguous.c
new file mode 100644
index 000000000..950fff9ce
--- /dev/null
+++ b/drivers/base/dma-contiguous.c
@@ -0,0 +1,280 @@
+/*
+ * Contiguous Memory Allocator for DMA mapping framework
+ * Copyright (c) 2010-2011 by Samsung Electronics.
+ * Written by:
+ *	Marek Szyprowski <m.szyprowski@samsung.com>
+ *	Michal Nazarewicz <mina86@mina86.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License or (at your optional) any later version of the license.
+ */
+
+#define pr_fmt(fmt) "cma: " fmt
+
+#ifdef CONFIG_CMA_DEBUG
+#ifndef DEBUG
+#  define DEBUG
+#endif
+#endif
+
+#include <asm/page.h>
+#include <asm/dma-contiguous.h>
+
+#include <linux/memblock.h>
+#include <linux/err.h>
+#include <linux/sizes.h>
+#include <linux/dma-contiguous.h>
+#include <linux/cma.h>
+
+#ifdef CONFIG_CMA_SIZE_MBYTES
+#define CMA_SIZE_MBYTES CONFIG_CMA_SIZE_MBYTES
+#else
+#define CMA_SIZE_MBYTES 0
+#endif
+
+struct cma *dma_contiguous_default_area;
+
+/*
+ * Default global CMA area size can be defined in kernel's .config.
+ * This is useful mainly for distro maintainers to create a kernel
+ * that works correctly for most supported systems.
+ * The size can be set in bytes or as a percentage of the total memory
+ * in the system.
+ *
+ * Users, who want to set the size of global CMA area for their system
+ * should use cma= kernel parameter.
+ */
+static const phys_addr_t size_bytes = CMA_SIZE_MBYTES * SZ_1M;
+static phys_addr_t size_cmdline = -1;
+static phys_addr_t base_cmdline;
+static phys_addr_t limit_cmdline;
+
+static int __init early_cma(char *p)
+{
+	pr_debug("%s(%s)\n", __func__, p);
+	size_cmdline = memparse(p, &p);
+	if (*p != '@')
+		return 0;
+	base_cmdline = memparse(p + 1, &p);
+	if (*p != '-') {
+		limit_cmdline = base_cmdline + size_cmdline;
+		return 0;
+	}
+	limit_cmdline = memparse(p + 1, &p);
+
+	return 0;
+}
+early_param("cma", early_cma);
+
+#ifdef CONFIG_CMA_SIZE_PERCENTAGE
+
+static phys_addr_t __init __maybe_unused cma_early_percent_memory(void)
+{
+	struct memblock_region *reg;
+	unsigned long total_pages = 0;
+
+	/*
+	 * We cannot use memblock_phys_mem_size() here, because
+	 * memblock_analyze() has not been called yet.
+	 */
+	for_each_memblock(memory, reg)
+		total_pages += memblock_region_memory_end_pfn(reg) -
+			       memblock_region_memory_base_pfn(reg);
+
+	return (total_pages * CONFIG_CMA_SIZE_PERCENTAGE / 100) << PAGE_SHIFT;
+}
+
+#else
+
+static inline __maybe_unused phys_addr_t cma_early_percent_memory(void)
+{
+	return 0;
+}
+
+#endif
+
+/**
+ * dma_contiguous_reserve() - reserve area(s) for contiguous memory handling
+ * @limit: End address of the reserved memory (optional, 0 for any).
+ *
+ * This function reserves memory from early allocator. It should be
+ * called by arch specific code once the early allocator (memblock or bootmem)
+ * has been activated and all other subsystems have already allocated/reserved
+ * memory.
+ */
+void __init dma_contiguous_reserve(phys_addr_t limit)
+{
+	phys_addr_t selected_size = 0;
+	phys_addr_t selected_base = 0;
+	phys_addr_t selected_limit = limit;
+	bool fixed = false;
+
+	pr_debug("%s(limit %08lx)\n", __func__, (unsigned long)limit);
+
+	if (size_cmdline != -1) {
+		selected_size = size_cmdline;
+		selected_base = base_cmdline;
+		selected_limit = min_not_zero(limit_cmdline, limit);
+		if (base_cmdline + size_cmdline == limit_cmdline)
+			fixed = true;
+	} else {
+#ifdef CONFIG_CMA_SIZE_SEL_MBYTES
+		selected_size = size_bytes;
+#elif defined(CONFIG_CMA_SIZE_SEL_PERCENTAGE)
+		selected_size = cma_early_percent_memory();
+#elif defined(CONFIG_CMA_SIZE_SEL_MIN)
+		selected_size = min(size_bytes, cma_early_percent_memory());
+#elif defined(CONFIG_CMA_SIZE_SEL_MAX)
+		selected_size = max(size_bytes, cma_early_percent_memory());
+#endif
+	}
+
+	if (selected_size && !dma_contiguous_default_area) {
+		pr_debug("%s: reserving %ld MiB for global area\n", __func__,
+			 (unsigned long)selected_size / SZ_1M);
+
+		dma_contiguous_reserve_area(selected_size, selected_base,
+					    selected_limit,
+					    &dma_contiguous_default_area,
+					    fixed);
+	}
+}
+
+/**
+ * dma_contiguous_reserve_area() - reserve custom contiguous area
+ * @size: Size of the reserved area (in bytes),
+ * @base: Base address of the reserved area optional, use 0 for any
+ * @limit: End address of the reserved memory (optional, 0 for any).
+ * @res_cma: Pointer to store the created cma region.
+ * @fixed: hint about where to place the reserved area
+ *
+ * This function reserves memory from early allocator. It should be
+ * called by arch specific code once the early allocator (memblock or bootmem)
+ * has been activated and all other subsystems have already allocated/reserved
+ * memory. This function allows to create custom reserved areas for specific
+ * devices.
+ *
+ * If @fixed is true, reserve contiguous area at exactly @base.  If false,
+ * reserve in range from @base to @limit.
+ */
+int __init dma_contiguous_reserve_area(phys_addr_t size, phys_addr_t base,
+				       phys_addr_t limit, struct cma **res_cma,
+				       bool fixed)
+{
+	int ret;
+
+	ret = cma_declare_contiguous(base, size, limit, 0, 0, fixed, res_cma);
+	if (ret)
+		return ret;
+
+	/* Architecture specific contiguous memory fixup. */
+	dma_contiguous_early_fixup(cma_get_base(*res_cma),
+				cma_get_size(*res_cma));
+
+	return 0;
+}
+
+/**
+ * dma_alloc_from_contiguous() - allocate pages from contiguous area
+ * @dev:   Pointer to device for which the allocation is performed.
+ * @count: Requested number of pages.
+ * @align: Requested alignment of pages (in PAGE_SIZE order).
+ *
+ * This function allocates memory buffer for specified device. It uses
+ * device specific contiguous memory area if available or the default
+ * global one. Requires architecture specific dev_get_cma_area() helper
+ * function.
+ */
+struct page *dma_alloc_from_contiguous(struct device *dev, int count,
+				       unsigned int align)
+{
+	if (align > CONFIG_CMA_ALIGNMENT)
+		align = CONFIG_CMA_ALIGNMENT;
+
+	return cma_alloc(dev_get_cma_area(dev), count, align);
+}
+
+/**
+ * dma_release_from_contiguous() - release allocated pages
+ * @dev:   Pointer to device for which the pages were allocated.
+ * @pages: Allocated pages.
+ * @count: Number of allocated pages.
+ *
+ * This function releases memory allocated by dma_alloc_from_contiguous().
+ * It returns false when provided pages do not belong to contiguous area and
+ * true otherwise.
+ */
+bool dma_release_from_contiguous(struct device *dev, struct page *pages,
+				 int count)
+{
+	return cma_release(dev_get_cma_area(dev), pages, count);
+}
+
+/*
+ * Support for reserved memory regions defined in device tree
+ */
+#ifdef CONFIG_OF_RESERVED_MEM
+#include <linux/of.h>
+#include <linux/of_fdt.h>
+#include <linux/of_reserved_mem.h>
+
+#undef pr_fmt
+#define pr_fmt(fmt) fmt
+
+static int rmem_cma_device_init(struct reserved_mem *rmem, struct device *dev)
+{
+	dev_set_cma_area(dev, rmem->priv);
+	return 0;
+}
+
+static void rmem_cma_device_release(struct reserved_mem *rmem,
+				    struct device *dev)
+{
+	dev_set_cma_area(dev, NULL);
+}
+
+static const struct reserved_mem_ops rmem_cma_ops = {
+	.device_init	= rmem_cma_device_init,
+	.device_release = rmem_cma_device_release,
+};
+
+static int __init rmem_cma_setup(struct reserved_mem *rmem)
+{
+	phys_addr_t align = PAGE_SIZE << max(MAX_ORDER - 1, pageblock_order);
+	phys_addr_t mask = align - 1;
+	unsigned long node = rmem->fdt_node;
+	struct cma *cma;
+	int err;
+
+	if (!of_get_flat_dt_prop(node, "reusable", NULL) ||
+	    of_get_flat_dt_prop(node, "no-map", NULL))
+		return -EINVAL;
+
+	if ((rmem->base & mask) || (rmem->size & mask)) {
+		pr_err("Reserved memory: incorrect alignment of CMA region\n");
+		return -EINVAL;
+	}
+
+	err = cma_init_reserved_mem(rmem->base, rmem->size, 0, &cma);
+	if (err) {
+		pr_err("Reserved memory: unable to setup CMA region\n");
+		return err;
+	}
+	/* Architecture specific contiguous memory fixup. */
+	dma_contiguous_early_fixup(rmem->base, rmem->size);
+
+	if (of_get_flat_dt_prop(node, "linux,cma-default", NULL))
+		dma_contiguous_set_default(cma);
+
+	rmem->ops = &rmem_cma_ops;
+	rmem->priv = cma;
+
+	pr_info("Reserved memory: created CMA memory pool at %pa, size %ld MiB\n",
+		&rmem->base, (unsigned long)rmem->size / SZ_1M);
+
+	return 0;
+}
+RESERVEDMEM_OF_DECLARE(cma, "shared-dma-pool", rmem_cma_setup);
+#endif