summaryrefslogtreecommitdiff
path: root/drivers/block/cciss.h
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/block/cciss.h')
-rw-r--r--drivers/block/cciss.h435
1 files changed, 435 insertions, 0 deletions
diff --git a/drivers/block/cciss.h b/drivers/block/cciss.h
new file mode 100644
index 000000000..7fda30e4a
--- /dev/null
+++ b/drivers/block/cciss.h
@@ -0,0 +1,435 @@
+#ifndef CCISS_H
+#define CCISS_H
+
+#include <linux/genhd.h>
+#include <linux/mutex.h>
+
+#include "cciss_cmd.h"
+
+
+#define NWD_SHIFT 4
+#define MAX_PART (1 << NWD_SHIFT)
+
+#define IO_OK 0
+#define IO_ERROR 1
+#define IO_NEEDS_RETRY 3
+
+#define VENDOR_LEN 8
+#define MODEL_LEN 16
+#define REV_LEN 4
+
+struct ctlr_info;
+typedef struct ctlr_info ctlr_info_t;
+
+struct access_method {
+ void (*submit_command)(ctlr_info_t *h, CommandList_struct *c);
+ void (*set_intr_mask)(ctlr_info_t *h, unsigned long val);
+ unsigned long (*fifo_full)(ctlr_info_t *h);
+ bool (*intr_pending)(ctlr_info_t *h);
+ unsigned long (*command_completed)(ctlr_info_t *h);
+};
+typedef struct _drive_info_struct
+{
+ unsigned char LunID[8];
+ int usage_count;
+ struct request_queue *queue;
+ sector_t nr_blocks;
+ int block_size;
+ int heads;
+ int sectors;
+ int cylinders;
+ int raid_level; /* set to -1 to indicate that
+ * the drive is not in use/configured
+ */
+ int busy_configuring; /* This is set when a drive is being removed
+ * to prevent it from being opened or it's
+ * queue from being started.
+ */
+ struct device dev;
+ __u8 serial_no[16]; /* from inquiry page 0x83,
+ * not necc. null terminated.
+ */
+ char vendor[VENDOR_LEN + 1]; /* SCSI vendor string */
+ char model[MODEL_LEN + 1]; /* SCSI model string */
+ char rev[REV_LEN + 1]; /* SCSI revision string */
+ char device_initialized; /* indicates whether dev is initialized */
+} drive_info_struct;
+
+struct ctlr_info
+{
+ int ctlr;
+ char devname[8];
+ char *product_name;
+ char firm_ver[4]; /* Firmware version */
+ struct pci_dev *pdev;
+ __u32 board_id;
+ void __iomem *vaddr;
+ unsigned long paddr;
+ int nr_cmds; /* Number of commands allowed on this controller */
+ CfgTable_struct __iomem *cfgtable;
+ int interrupts_enabled;
+ int major;
+ int max_commands;
+ int commands_outstanding;
+ int max_outstanding; /* Debug */
+ int num_luns;
+ int highest_lun;
+ int usage_count; /* number of opens all all minor devices */
+ /* Need space for temp sg list
+ * number of scatter/gathers supported
+ * number of scatter/gathers in chained block
+ */
+ struct scatterlist **scatter_list;
+ int maxsgentries;
+ int chainsize;
+ int max_cmd_sgentries;
+ SGDescriptor_struct **cmd_sg_list;
+
+# define PERF_MODE_INT 0
+# define DOORBELL_INT 1
+# define SIMPLE_MODE_INT 2
+# define MEMQ_MODE_INT 3
+ unsigned int intr[4];
+ unsigned int msix_vector;
+ unsigned int msi_vector;
+ int intr_mode;
+ int cciss_max_sectors;
+ BYTE cciss_read;
+ BYTE cciss_write;
+ BYTE cciss_read_capacity;
+
+ /* information about each logical volume */
+ drive_info_struct *drv[CISS_MAX_LUN];
+
+ struct access_method access;
+
+ /* queue and queue Info */
+ struct list_head reqQ;
+ struct list_head cmpQ;
+ unsigned int Qdepth;
+ unsigned int maxQsinceinit;
+ unsigned int maxSG;
+ spinlock_t lock;
+
+ /* pointers to command and error info pool */
+ CommandList_struct *cmd_pool;
+ dma_addr_t cmd_pool_dhandle;
+ ErrorInfo_struct *errinfo_pool;
+ dma_addr_t errinfo_pool_dhandle;
+ unsigned long *cmd_pool_bits;
+ int nr_allocs;
+ int nr_frees;
+ int busy_configuring;
+ int busy_initializing;
+ int busy_scanning;
+ struct mutex busy_shutting_down;
+
+ /* This element holds the zero based queue number of the last
+ * queue to be started. It is used for fairness.
+ */
+ int next_to_run;
+
+ /* Disk structures we need to pass back */
+ struct gendisk *gendisk[CISS_MAX_LUN];
+#ifdef CONFIG_CISS_SCSI_TAPE
+ struct cciss_scsi_adapter_data_t *scsi_ctlr;
+#endif
+ unsigned char alive;
+ struct list_head scan_list;
+ struct completion scan_wait;
+ struct device dev;
+ /*
+ * Performant mode tables.
+ */
+ u32 trans_support;
+ u32 trans_offset;
+ struct TransTable_struct *transtable;
+ unsigned long transMethod;
+
+ /*
+ * Performant mode completion buffer
+ */
+ u64 *reply_pool;
+ dma_addr_t reply_pool_dhandle;
+ u64 *reply_pool_head;
+ size_t reply_pool_size;
+ unsigned char reply_pool_wraparound;
+ u32 *blockFetchTable;
+};
+
+/* Defining the diffent access_methods
+ *
+ * Memory mapped FIFO interface (SMART 53xx cards)
+ */
+#define SA5_DOORBELL 0x20
+#define SA5_REQUEST_PORT_OFFSET 0x40
+#define SA5_REPLY_INTR_MASK_OFFSET 0x34
+#define SA5_REPLY_PORT_OFFSET 0x44
+#define SA5_INTR_STATUS 0x30
+#define SA5_SCRATCHPAD_OFFSET 0xB0
+
+#define SA5_CTCFG_OFFSET 0xB4
+#define SA5_CTMEM_OFFSET 0xB8
+
+#define SA5_INTR_OFF 0x08
+#define SA5B_INTR_OFF 0x04
+#define SA5_INTR_PENDING 0x08
+#define SA5B_INTR_PENDING 0x04
+#define FIFO_EMPTY 0xffffffff
+#define CCISS_FIRMWARE_READY 0xffff0000 /* value in scratchpad register */
+/* Perf. mode flags */
+#define SA5_PERF_INTR_PENDING 0x04
+#define SA5_PERF_INTR_OFF 0x05
+#define SA5_OUTDB_STATUS_PERF_BIT 0x01
+#define SA5_OUTDB_CLEAR_PERF_BIT 0x01
+#define SA5_OUTDB_CLEAR 0xA0
+#define SA5_OUTDB_CLEAR_PERF_BIT 0x01
+#define SA5_OUTDB_STATUS 0x9C
+
+
+#define CISS_ERROR_BIT 0x02
+
+#define CCISS_INTR_ON 1
+#define CCISS_INTR_OFF 0
+
+
+/* CCISS_BOARD_READY_WAIT_SECS is how long to wait for a board
+ * to become ready, in seconds, before giving up on it.
+ * CCISS_BOARD_READY_POLL_INTERVAL_MSECS * is how long to wait
+ * between polling the board to see if it is ready, in
+ * milliseconds. CCISS_BOARD_READY_ITERATIONS is derived
+ * the above.
+ */
+#define CCISS_BOARD_READY_WAIT_SECS (120)
+#define CCISS_BOARD_NOT_READY_WAIT_SECS (100)
+#define CCISS_BOARD_READY_POLL_INTERVAL_MSECS (100)
+#define CCISS_BOARD_READY_ITERATIONS \
+ ((CCISS_BOARD_READY_WAIT_SECS * 1000) / \
+ CCISS_BOARD_READY_POLL_INTERVAL_MSECS)
+#define CCISS_BOARD_NOT_READY_ITERATIONS \
+ ((CCISS_BOARD_NOT_READY_WAIT_SECS * 1000) / \
+ CCISS_BOARD_READY_POLL_INTERVAL_MSECS)
+#define CCISS_POST_RESET_PAUSE_MSECS (3000)
+#define CCISS_POST_RESET_NOOP_INTERVAL_MSECS (4000)
+#define CCISS_POST_RESET_NOOP_RETRIES (12)
+#define CCISS_POST_RESET_NOOP_TIMEOUT_MSECS (10000)
+
+/*
+ Send the command to the hardware
+*/
+static void SA5_submit_command( ctlr_info_t *h, CommandList_struct *c)
+{
+#ifdef CCISS_DEBUG
+ printk(KERN_WARNING "cciss%d: Sending %08x - down to controller\n",
+ h->ctlr, c->busaddr);
+#endif /* CCISS_DEBUG */
+ writel(c->busaddr, h->vaddr + SA5_REQUEST_PORT_OFFSET);
+ readl(h->vaddr + SA5_SCRATCHPAD_OFFSET);
+ h->commands_outstanding++;
+ if ( h->commands_outstanding > h->max_outstanding)
+ h->max_outstanding = h->commands_outstanding;
+}
+
+/*
+ * This card is the opposite of the other cards.
+ * 0 turns interrupts on...
+ * 0x08 turns them off...
+ */
+static void SA5_intr_mask(ctlr_info_t *h, unsigned long val)
+{
+ if (val)
+ { /* Turn interrupts on */
+ h->interrupts_enabled = 1;
+ writel(0, h->vaddr + SA5_REPLY_INTR_MASK_OFFSET);
+ (void) readl(h->vaddr + SA5_REPLY_INTR_MASK_OFFSET);
+ } else /* Turn them off */
+ {
+ h->interrupts_enabled = 0;
+ writel( SA5_INTR_OFF,
+ h->vaddr + SA5_REPLY_INTR_MASK_OFFSET);
+ (void) readl(h->vaddr + SA5_REPLY_INTR_MASK_OFFSET);
+ }
+}
+/*
+ * This card is the opposite of the other cards.
+ * 0 turns interrupts on...
+ * 0x04 turns them off...
+ */
+static void SA5B_intr_mask(ctlr_info_t *h, unsigned long val)
+{
+ if (val)
+ { /* Turn interrupts on */
+ h->interrupts_enabled = 1;
+ writel(0, h->vaddr + SA5_REPLY_INTR_MASK_OFFSET);
+ (void) readl(h->vaddr + SA5_REPLY_INTR_MASK_OFFSET);
+ } else /* Turn them off */
+ {
+ h->interrupts_enabled = 0;
+ writel( SA5B_INTR_OFF,
+ h->vaddr + SA5_REPLY_INTR_MASK_OFFSET);
+ (void) readl(h->vaddr + SA5_REPLY_INTR_MASK_OFFSET);
+ }
+}
+
+/* Performant mode intr_mask */
+static void SA5_performant_intr_mask(ctlr_info_t *h, unsigned long val)
+{
+ if (val) { /* turn on interrupts */
+ h->interrupts_enabled = 1;
+ writel(0, h->vaddr + SA5_REPLY_INTR_MASK_OFFSET);
+ (void) readl(h->vaddr + SA5_REPLY_INTR_MASK_OFFSET);
+ } else {
+ h->interrupts_enabled = 0;
+ writel(SA5_PERF_INTR_OFF,
+ h->vaddr + SA5_REPLY_INTR_MASK_OFFSET);
+ (void) readl(h->vaddr + SA5_REPLY_INTR_MASK_OFFSET);
+ }
+}
+
+/*
+ * Returns true if fifo is full.
+ *
+ */
+static unsigned long SA5_fifo_full(ctlr_info_t *h)
+{
+ if( h->commands_outstanding >= h->max_commands)
+ return(1);
+ else
+ return(0);
+
+}
+/*
+ * returns value read from hardware.
+ * returns FIFO_EMPTY if there is nothing to read
+ */
+static unsigned long SA5_completed(ctlr_info_t *h)
+{
+ unsigned long register_value
+ = readl(h->vaddr + SA5_REPLY_PORT_OFFSET);
+ if(register_value != FIFO_EMPTY)
+ {
+ h->commands_outstanding--;
+#ifdef CCISS_DEBUG
+ printk("cciss: Read %lx back from board\n", register_value);
+#endif /* CCISS_DEBUG */
+ }
+#ifdef CCISS_DEBUG
+ else
+ {
+ printk("cciss: FIFO Empty read\n");
+ }
+#endif
+ return ( register_value);
+
+}
+
+/* Performant mode command completed */
+static unsigned long SA5_performant_completed(ctlr_info_t *h)
+{
+ unsigned long register_value = FIFO_EMPTY;
+
+ /* flush the controller write of the reply queue by reading
+ * outbound doorbell status register.
+ */
+ register_value = readl(h->vaddr + SA5_OUTDB_STATUS);
+ /* msi auto clears the interrupt pending bit. */
+ if (!(h->msi_vector || h->msix_vector)) {
+ writel(SA5_OUTDB_CLEAR_PERF_BIT, h->vaddr + SA5_OUTDB_CLEAR);
+ /* Do a read in order to flush the write to the controller
+ * (as per spec.)
+ */
+ register_value = readl(h->vaddr + SA5_OUTDB_STATUS);
+ }
+
+ if ((*(h->reply_pool_head) & 1) == (h->reply_pool_wraparound)) {
+ register_value = *(h->reply_pool_head);
+ (h->reply_pool_head)++;
+ h->commands_outstanding--;
+ } else {
+ register_value = FIFO_EMPTY;
+ }
+ /* Check for wraparound */
+ if (h->reply_pool_head == (h->reply_pool + h->max_commands)) {
+ h->reply_pool_head = h->reply_pool;
+ h->reply_pool_wraparound ^= 1;
+ }
+
+ return register_value;
+}
+/*
+ * Returns true if an interrupt is pending..
+ */
+static bool SA5_intr_pending(ctlr_info_t *h)
+{
+ unsigned long register_value =
+ readl(h->vaddr + SA5_INTR_STATUS);
+#ifdef CCISS_DEBUG
+ printk("cciss: intr_pending %lx\n", register_value);
+#endif /* CCISS_DEBUG */
+ if( register_value & SA5_INTR_PENDING)
+ return 1;
+ return 0 ;
+}
+
+/*
+ * Returns true if an interrupt is pending..
+ */
+static bool SA5B_intr_pending(ctlr_info_t *h)
+{
+ unsigned long register_value =
+ readl(h->vaddr + SA5_INTR_STATUS);
+#ifdef CCISS_DEBUG
+ printk("cciss: intr_pending %lx\n", register_value);
+#endif /* CCISS_DEBUG */
+ if( register_value & SA5B_INTR_PENDING)
+ return 1;
+ return 0 ;
+}
+
+static bool SA5_performant_intr_pending(ctlr_info_t *h)
+{
+ unsigned long register_value = readl(h->vaddr + SA5_INTR_STATUS);
+
+ if (!register_value)
+ return false;
+
+ if (h->msi_vector || h->msix_vector)
+ return true;
+
+ /* Read outbound doorbell to flush */
+ register_value = readl(h->vaddr + SA5_OUTDB_STATUS);
+ return register_value & SA5_OUTDB_STATUS_PERF_BIT;
+}
+
+static struct access_method SA5_access = {
+ SA5_submit_command,
+ SA5_intr_mask,
+ SA5_fifo_full,
+ SA5_intr_pending,
+ SA5_completed,
+};
+
+static struct access_method SA5B_access = {
+ SA5_submit_command,
+ SA5B_intr_mask,
+ SA5_fifo_full,
+ SA5B_intr_pending,
+ SA5_completed,
+};
+
+static struct access_method SA5_performant_access = {
+ SA5_submit_command,
+ SA5_performant_intr_mask,
+ SA5_fifo_full,
+ SA5_performant_intr_pending,
+ SA5_performant_completed,
+};
+
+struct board_type {
+ __u32 board_id;
+ char *product_name;
+ struct access_method *access;
+ int nr_cmds; /* Max cmds this kind of ctlr can handle. */
+};
+
+#endif /* CCISS_H */