diff options
Diffstat (limited to 'drivers/block/cpqarray.c')
| -rw-r--r-- | drivers/block/cpqarray.c | 1820 |
1 files changed, 0 insertions, 1820 deletions
diff --git a/drivers/block/cpqarray.c b/drivers/block/cpqarray.c deleted file mode 100644 index f749df9e1..000000000 --- a/drivers/block/cpqarray.c +++ /dev/null @@ -1,1820 +0,0 @@ -/* - * Disk Array driver for Compaq SMART2 Controllers - * Copyright 1998 Compaq Computer Corporation - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or - * NON INFRINGEMENT. See the GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. - * - * Questions/Comments/Bugfixes to iss_storagedev@hp.com - * - */ -#include <linux/module.h> -#include <linux/types.h> -#include <linux/pci.h> -#include <linux/bio.h> -#include <linux/interrupt.h> -#include <linux/kernel.h> -#include <linux/slab.h> -#include <linux/delay.h> -#include <linux/major.h> -#include <linux/fs.h> -#include <linux/blkpg.h> -#include <linux/timer.h> -#include <linux/proc_fs.h> -#include <linux/seq_file.h> -#include <linux/init.h> -#include <linux/hdreg.h> -#include <linux/mutex.h> -#include <linux/spinlock.h> -#include <linux/blkdev.h> -#include <linux/genhd.h> -#include <linux/scatterlist.h> -#include <asm/uaccess.h> -#include <asm/io.h> - - -#define SMART2_DRIVER_VERSION(maj,min,submin) ((maj<<16)|(min<<8)|(submin)) - -#define DRIVER_NAME "Compaq SMART2 Driver (v 2.6.0)" -#define DRIVER_VERSION SMART2_DRIVER_VERSION(2,6,0) - -/* Embedded module documentation macros - see modules.h */ -/* Original author Chris Frantz - Compaq Computer Corporation */ -MODULE_AUTHOR("Compaq Computer Corporation"); -MODULE_DESCRIPTION("Driver for Compaq Smart2 Array Controllers version 2.6.0"); -MODULE_LICENSE("GPL"); - -#include "cpqarray.h" -#include "ida_cmd.h" -#include "smart1,2.h" -#include "ida_ioctl.h" - -#define READ_AHEAD 128 -#define NR_CMDS 128 /* This could probably go as high as ~400 */ - -#define MAX_CTLR 8 -#define CTLR_SHIFT 8 - -#define CPQARRAY_DMA_MASK 0xFFFFFFFF /* 32 bit DMA */ - -static DEFINE_MUTEX(cpqarray_mutex); -static int nr_ctlr; -static ctlr_info_t *hba[MAX_CTLR]; - -static int eisa[8]; - -#define NR_PRODUCTS ARRAY_SIZE(products) - -/* board_id = Subsystem Device ID & Vendor ID - * product = Marketing Name for the board - * access = Address of the struct of function pointers - */ -static struct board_type products[] = { - { 0x0040110E, "IDA", &smart1_access }, - { 0x0140110E, "IDA-2", &smart1_access }, - { 0x1040110E, "IAES", &smart1_access }, - { 0x2040110E, "SMART", &smart1_access }, - { 0x3040110E, "SMART-2/E", &smart2e_access }, - { 0x40300E11, "SMART-2/P", &smart2_access }, - { 0x40310E11, "SMART-2SL", &smart2_access }, - { 0x40320E11, "Smart Array 3200", &smart2_access }, - { 0x40330E11, "Smart Array 3100ES", &smart2_access }, - { 0x40340E11, "Smart Array 221", &smart2_access }, - { 0x40400E11, "Integrated Array", &smart4_access }, - { 0x40480E11, "Compaq Raid LC2", &smart4_access }, - { 0x40500E11, "Smart Array 4200", &smart4_access }, - { 0x40510E11, "Smart Array 4250ES", &smart4_access }, - { 0x40580E11, "Smart Array 431", &smart4_access }, -}; - -/* define the PCI info for the PCI cards this driver can control */ -static const struct pci_device_id cpqarray_pci_device_id[] = -{ - { PCI_VENDOR_ID_DEC, PCI_DEVICE_ID_COMPAQ_42XX, - 0x0E11, 0x4058, 0, 0, 0}, /* SA431 */ - { PCI_VENDOR_ID_DEC, PCI_DEVICE_ID_COMPAQ_42XX, - 0x0E11, 0x4051, 0, 0, 0}, /* SA4250ES */ - { PCI_VENDOR_ID_DEC, PCI_DEVICE_ID_COMPAQ_42XX, - 0x0E11, 0x4050, 0, 0, 0}, /* SA4200 */ - { PCI_VENDOR_ID_NCR, PCI_DEVICE_ID_NCR_53C1510, - 0x0E11, 0x4048, 0, 0, 0}, /* LC2 */ - { PCI_VENDOR_ID_NCR, PCI_DEVICE_ID_NCR_53C1510, - 0x0E11, 0x4040, 0, 0, 0}, /* Integrated Array */ - { PCI_VENDOR_ID_COMPAQ, PCI_DEVICE_ID_COMPAQ_SMART2P, - 0x0E11, 0x4034, 0, 0, 0}, /* SA 221 */ - { PCI_VENDOR_ID_COMPAQ, PCI_DEVICE_ID_COMPAQ_SMART2P, - 0x0E11, 0x4033, 0, 0, 0}, /* SA 3100ES*/ - { PCI_VENDOR_ID_COMPAQ, PCI_DEVICE_ID_COMPAQ_SMART2P, - 0x0E11, 0x4032, 0, 0, 0}, /* SA 3200*/ - { PCI_VENDOR_ID_COMPAQ, PCI_DEVICE_ID_COMPAQ_SMART2P, - 0x0E11, 0x4031, 0, 0, 0}, /* SA 2SL*/ - { PCI_VENDOR_ID_COMPAQ, PCI_DEVICE_ID_COMPAQ_SMART2P, - 0x0E11, 0x4030, 0, 0, 0}, /* SA 2P */ - { 0 } -}; - -MODULE_DEVICE_TABLE(pci, cpqarray_pci_device_id); - -static struct gendisk *ida_gendisk[MAX_CTLR][NWD]; - -/* Debug... */ -#define DBG(s) do { s } while(0) -/* Debug (general info)... */ -#define DBGINFO(s) do { } while(0) -/* Debug Paranoid... */ -#define DBGP(s) do { } while(0) -/* Debug Extra Paranoid... */ -#define DBGPX(s) do { } while(0) - -static int cpqarray_pci_init(ctlr_info_t *c, struct pci_dev *pdev); -static void __iomem *remap_pci_mem(ulong base, ulong size); -static int cpqarray_eisa_detect(void); -static int pollcomplete(int ctlr); -static void getgeometry(int ctlr); -static void start_fwbk(int ctlr); - -static cmdlist_t * cmd_alloc(ctlr_info_t *h, int get_from_pool); -static void cmd_free(ctlr_info_t *h, cmdlist_t *c, int got_from_pool); - -static void free_hba(int i); -static int alloc_cpqarray_hba(void); - -static int sendcmd( - __u8 cmd, - int ctlr, - void *buff, - size_t size, - unsigned int blk, - unsigned int blkcnt, - unsigned int log_unit ); - -static int ida_unlocked_open(struct block_device *bdev, fmode_t mode); -static void ida_release(struct gendisk *disk, fmode_t mode); -static int ida_ioctl(struct block_device *bdev, fmode_t mode, unsigned int cmd, unsigned long arg); -static int ida_getgeo(struct block_device *bdev, struct hd_geometry *geo); -static int ida_ctlr_ioctl(ctlr_info_t *h, int dsk, ida_ioctl_t *io); - -static void do_ida_request(struct request_queue *q); -static void start_io(ctlr_info_t *h); - -static inline void addQ(cmdlist_t **Qptr, cmdlist_t *c); -static inline cmdlist_t *removeQ(cmdlist_t **Qptr, cmdlist_t *c); -static inline void complete_command(cmdlist_t *cmd, int timeout); - -static irqreturn_t do_ida_intr(int irq, void *dev_id); -static void ida_timer(unsigned long tdata); -static int ida_revalidate(struct gendisk *disk); -static int revalidate_allvol(ctlr_info_t *host); -static int cpqarray_register_ctlr(int ctlr, struct pci_dev *pdev); - -#ifdef CONFIG_PROC_FS -static void ida_procinit(int i); -#else -static void ida_procinit(int i) {} -#endif - -static inline drv_info_t *get_drv(struct gendisk *disk) -{ - return disk->private_data; -} - -static inline ctlr_info_t *get_host(struct gendisk *disk) -{ - return disk->queue->queuedata; -} - - -static const struct block_device_operations ida_fops = { - .owner = THIS_MODULE, - .open = ida_unlocked_open, - .release = ida_release, - .ioctl = ida_ioctl, - .getgeo = ida_getgeo, - .revalidate_disk= ida_revalidate, -}; - - -#ifdef CONFIG_PROC_FS - -static struct proc_dir_entry *proc_array; -static const struct file_operations ida_proc_fops; - -/* - * Get us a file in /proc/array that says something about each controller. - * Create /proc/array if it doesn't exist yet. - */ -static void __init ida_procinit(int i) -{ - if (proc_array == NULL) { - proc_array = proc_mkdir("driver/cpqarray", NULL); - if (!proc_array) return; - } - - proc_create_data(hba[i]->devname, 0, proc_array, &ida_proc_fops, hba[i]); -} - -/* - * Report information about this controller. - */ -static int ida_proc_show(struct seq_file *m, void *v) -{ - int i, ctlr; - ctlr_info_t *h = (ctlr_info_t*)m->private; - drv_info_t *drv; -#ifdef CPQ_PROC_PRINT_QUEUES - cmdlist_t *c; - unsigned long flags; -#endif - - ctlr = h->ctlr; - seq_printf(m, "%s: Compaq %s Controller\n" - " Board ID: 0x%08lx\n" - " Firmware Revision: %c%c%c%c\n" - " Controller Sig: 0x%08lx\n" - " Memory Address: 0x%08lx\n" - " I/O Port: 0x%04x\n" - " IRQ: %d\n" - " Logical drives: %d\n" - " Physical drives: %d\n\n" - " Current Q depth: %d\n" - " Max Q depth since init: %d\n\n", - h->devname, - h->product_name, - (unsigned long)h->board_id, - h->firm_rev[0], h->firm_rev[1], h->firm_rev[2], h->firm_rev[3], - (unsigned long)h->ctlr_sig, (unsigned long)h->vaddr, - (unsigned int) h->io_mem_addr, (unsigned int)h->intr, - h->log_drives, h->phys_drives, - h->Qdepth, h->maxQsinceinit); - - seq_puts(m, "Logical Drive Info:\n"); - - for(i=0; i<h->log_drives; i++) { - drv = &h->drv[i]; - seq_printf(m, "ida/c%dd%d: blksz=%d nr_blks=%d\n", - ctlr, i, drv->blk_size, drv->nr_blks); - } - -#ifdef CPQ_PROC_PRINT_QUEUES - spin_lock_irqsave(IDA_LOCK(h->ctlr), flags); - seq_puts(m, "\nCurrent Queues:\n"); - - c = h->reqQ; - seq_printf(m, "reqQ = %p", c); - if (c) c=c->next; - while(c && c != h->reqQ) { - seq_printf(m, "->%p", c); - c=c->next; - } - - c = h->cmpQ; - seq_printf(m, "\ncmpQ = %p", c); - if (c) c=c->next; - while(c && c != h->cmpQ) { - seq_printf(m, "->%p", c); - c=c->next; - } - - seq_putc(m, '\n'); - spin_unlock_irqrestore(IDA_LOCK(h->ctlr), flags); -#endif - seq_printf(m, "nr_allocs = %d\nnr_frees = %d\n", - h->nr_allocs, h->nr_frees); - return 0; -} - -static int ida_proc_open(struct inode *inode, struct file *file) -{ - return single_open(file, ida_proc_show, PDE_DATA(inode)); -} - -static const struct file_operations ida_proc_fops = { - .owner = THIS_MODULE, - .open = ida_proc_open, - .read = seq_read, - .llseek = seq_lseek, - .release = single_release, -}; -#endif /* CONFIG_PROC_FS */ - -module_param_array(eisa, int, NULL, 0); - -static void release_io_mem(ctlr_info_t *c) -{ - /* if IO mem was not protected do nothing */ - if( c->io_mem_addr == 0) - return; - release_region(c->io_mem_addr, c->io_mem_length); - c->io_mem_addr = 0; - c->io_mem_length = 0; -} - -static void cpqarray_remove_one(int i) -{ - int j; - char buff[4]; - - /* sendcmd will turn off interrupt, and send the flush... - * To write all data in the battery backed cache to disks - * no data returned, but don't want to send NULL to sendcmd */ - if( sendcmd(FLUSH_CACHE, i, buff, 4, 0, 0, 0)) - { - printk(KERN_WARNING "Unable to flush cache on controller %d\n", - i); - } - free_irq(hba[i]->intr, hba[i]); - iounmap(hba[i]->vaddr); - unregister_blkdev(COMPAQ_SMART2_MAJOR+i, hba[i]->devname); - del_timer(&hba[i]->timer); - remove_proc_entry(hba[i]->devname, proc_array); - pci_free_consistent(hba[i]->pci_dev, - NR_CMDS * sizeof(cmdlist_t), (hba[i]->cmd_pool), - hba[i]->cmd_pool_dhandle); - kfree(hba[i]->cmd_pool_bits); - for(j = 0; j < NWD; j++) { - if (ida_gendisk[i][j]->flags & GENHD_FL_UP) - del_gendisk(ida_gendisk[i][j]); - put_disk(ida_gendisk[i][j]); - } - blk_cleanup_queue(hba[i]->queue); - release_io_mem(hba[i]); - free_hba(i); -} - -static void cpqarray_remove_one_pci(struct pci_dev *pdev) -{ - int i; - ctlr_info_t *tmp_ptr; - - if (pci_get_drvdata(pdev) == NULL) { - printk( KERN_ERR "cpqarray: Unable to remove device \n"); - return; - } - - tmp_ptr = pci_get_drvdata(pdev); - i = tmp_ptr->ctlr; - if (hba[i] == NULL) { - printk(KERN_ERR "cpqarray: controller %d appears to have" - "already been removed \n", i); - return; - } - pci_set_drvdata(pdev, NULL); - - cpqarray_remove_one(i); -} - -/* removing an instance that was not removed automatically.. - * must be an eisa card. - */ -static void cpqarray_remove_one_eisa(int i) -{ - if (hba[i] == NULL) { - printk(KERN_ERR "cpqarray: controller %d appears to have" - "already been removed \n", i); - return; - } - cpqarray_remove_one(i); -} - -/* pdev is NULL for eisa */ -static int cpqarray_register_ctlr(int i, struct pci_dev *pdev) -{ - struct request_queue *q; - int j; - - /* - * register block devices - * Find disks and fill in structs - * Get an interrupt, set the Q depth and get into /proc - */ - - /* If this successful it should insure that we are the only */ - /* instance of the driver */ - if (register_blkdev(COMPAQ_SMART2_MAJOR+i, hba[i]->devname)) { - goto Enomem4; - } - hba[i]->access.set_intr_mask(hba[i], 0); - if (request_irq(hba[i]->intr, do_ida_intr, IRQF_SHARED, - hba[i]->devname, hba[i])) - { - printk(KERN_ERR "cpqarray: Unable to get irq %d for %s\n", - hba[i]->intr, hba[i]->devname); - goto Enomem3; - } - - for (j=0; j<NWD; j++) { - ida_gendisk[i][j] = alloc_disk(1 << NWD_SHIFT); - if (!ida_gendisk[i][j]) - goto Enomem2; - } - - hba[i]->cmd_pool = pci_alloc_consistent( - hba[i]->pci_dev, NR_CMDS * sizeof(cmdlist_t), - &(hba[i]->cmd_pool_dhandle)); - hba[i]->cmd_pool_bits = kcalloc( - DIV_ROUND_UP(NR_CMDS, BITS_PER_LONG), sizeof(unsigned long), - GFP_KERNEL); - - if (!hba[i]->cmd_pool_bits || !hba[i]->cmd_pool) - goto Enomem1; - - memset(hba[i]->cmd_pool, 0, NR_CMDS * sizeof(cmdlist_t)); - printk(KERN_INFO "cpqarray: Finding drives on %s", - hba[i]->devname); - - spin_lock_init(&hba[i]->lock); - q = blk_init_queue(do_ida_request, &hba[i]->lock); - if (!q) - goto Enomem1; - - hba[i]->queue = q; - q->queuedata = hba[i]; - - getgeometry(i); - start_fwbk(i); - - ida_procinit(i); - - if (pdev) - blk_queue_bounce_limit(q, hba[i]->pci_dev->dma_mask); - - /* This is a hardware imposed limit. */ - blk_queue_max_segments(q, SG_MAX); - - init_timer(&hba[i]->timer); - hba[i]->timer.expires = jiffies + IDA_TIMER; - hba[i]->timer.data = (unsigned long)hba[i]; - hba[i]->timer.function = ida_timer; - add_timer(&hba[i]->timer); - - /* Enable IRQ now that spinlock and rate limit timer are set up */ - hba[i]->access.set_intr_mask(hba[i], FIFO_NOT_EMPTY); - - for(j=0; j<NWD; j++) { - struct gendisk *disk = ida_gendisk[i][j]; - drv_info_t *drv = &hba[i]->drv[j]; - sprintf(disk->disk_name, "ida/c%dd%d", i, j); - disk->major = COMPAQ_SMART2_MAJOR + i; - disk->first_minor = j<<NWD_SHIFT; - disk->fops = &ida_fops; - if (j && !drv->nr_blks) - continue; - blk_queue_logical_block_size(hba[i]->queue, drv->blk_size); - set_capacity(disk, drv->nr_blks); - disk->queue = hba[i]->queue; - disk->private_data = drv; - add_disk(disk); - } - - /* done ! */ - return(i); - -Enomem1: - nr_ctlr = i; - kfree(hba[i]->cmd_pool_bits); - if (hba[i]->cmd_pool) - pci_free_consistent(hba[i]->pci_dev, NR_CMDS*sizeof(cmdlist_t), - hba[i]->cmd_pool, hba[i]->cmd_pool_dhandle); -Enomem2: - while (j--) { - put_disk(ida_gendisk[i][j]); - ida_gendisk[i][j] = NULL; - } - free_irq(hba[i]->intr, hba[i]); -Enomem3: - unregister_blkdev(COMPAQ_SMART2_MAJOR+i, hba[i]->devname); -Enomem4: - if (pdev) - pci_set_drvdata(pdev, NULL); - release_io_mem(hba[i]); - free_hba(i); - - printk( KERN_ERR "cpqarray: out of memory"); - - return -1; -} - -static int cpqarray_init_one(struct pci_dev *pdev, - const struct pci_device_id *ent) -{ - int i; - - printk(KERN_DEBUG "cpqarray: Device 0x%x has been found at" - " bus %d dev %d func %d\n", - pdev->device, pdev->bus->number, PCI_SLOT(pdev->devfn), - PCI_FUNC(pdev->devfn)); - i = alloc_cpqarray_hba(); - if( i < 0 ) - return (-1); - memset(hba[i], 0, sizeof(ctlr_info_t)); - sprintf(hba[i]->devname, "ida%d", i); - hba[i]->ctlr = i; - /* Initialize the pdev driver private data */ - pci_set_drvdata(pdev, hba[i]); - - if (cpqarray_pci_init(hba[i], pdev) != 0) { - pci_set_drvdata(pdev, NULL); - release_io_mem(hba[i]); - free_hba(i); - return -1; - } - - return (cpqarray_register_ctlr(i, pdev)); -} - -static struct pci_driver cpqarray_pci_driver = { - .name = "cpqarray", - .probe = cpqarray_init_one, - .remove = cpqarray_remove_one_pci, - .id_table = cpqarray_pci_device_id, -}; - -/* - * This is it. Find all the controllers and register them. - * returns the number of block devices registered. - */ -static int __init cpqarray_init(void) -{ - int num_cntlrs_reg = 0; - int i; - int rc = 0; - - /* detect controllers */ - printk(DRIVER_NAME "\n"); - - rc = pci_register_driver(&cpqarray_pci_driver); - if (rc) - return rc; - cpqarray_eisa_detect(); - - for (i=0; i < MAX_CTLR; i++) { - if (hba[i] != NULL) - num_cntlrs_reg++; - } - - if (num_cntlrs_reg) - return 0; - else { - pci_unregister_driver(&cpqarray_pci_driver); - return -ENODEV; - } -} - -/* Function to find the first free pointer into our hba[] array */ -/* Returns -1 if no free entries are left. */ -static int alloc_cpqarray_hba(void) -{ - int i; - - for(i=0; i< MAX_CTLR; i++) { - if (hba[i] == NULL) { - hba[i] = kmalloc(sizeof(ctlr_info_t), GFP_KERNEL); - if(hba[i]==NULL) { - printk(KERN_ERR "cpqarray: out of memory.\n"); - return (-1); - } - return (i); - } - } - printk(KERN_WARNING "cpqarray: This driver supports a maximum" - " of 8 controllers.\n"); - return(-1); -} - -static void free_hba(int i) -{ - kfree(hba[i]); - hba[i]=NULL; -} - -/* - * Find the IO address of the controller, its IRQ and so forth. Fill - * in some basic stuff into the ctlr_info_t structure. - */ -static int cpqarray_pci_init(ctlr_info_t *c, struct pci_dev *pdev) -{ - ushort vendor_id, device_id, command; - unchar cache_line_size, latency_timer; - unchar irq, revision; - unsigned long addr[6]; - __u32 board_id; - - int i; - - c->pci_dev = pdev; - pci_set_master(pdev); - if (pci_enable_device(pdev)) { - printk(KERN_ERR "cpqarray: Unable to Enable PCI device\n"); - return -1; - } - vendor_id = pdev->vendor; - device_id = pdev->device; - revision = pdev->revision; - irq = pdev->irq; - - for(i=0; i<6; i++) - addr[i] = pci_resource_start(pdev, i); - - if (pci_set_dma_mask(pdev, CPQARRAY_DMA_MASK) != 0) - { - printk(KERN_ERR "cpqarray: Unable to set DMA mask\n"); - return -1; - } - - pci_read_config_word(pdev, PCI_COMMAND, &command); - pci_read_config_byte(pdev, PCI_CACHE_LINE_SIZE, &cache_line_size); - pci_read_config_byte(pdev, PCI_LATENCY_TIMER, &latency_timer); - - pci_read_config_dword(pdev, 0x2c, &board_id); - - /* check to see if controller has been disabled */ - if(!(command & 0x02)) { - printk(KERN_WARNING - "cpqarray: controller appears to be disabled\n"); - return(-1); - } - -DBGINFO( - printk("vendor_id = %x\n", vendor_id); - printk("device_id = %x\n", device_id); - printk("command = %x\n", command); - for(i=0; i<6; i++) - printk("addr[%d] = %lx\n", i, addr[i]); - printk("revision = %x\n", revision); - printk("irq = %x\n", irq); - printk("cache_line_size = %x\n", cache_line_size); - printk("latency_timer = %x\n", latency_timer); - printk("board_id = %x\n", board_id); -); - - c->intr = irq; - - for(i=0; i<6; i++) { - if (pci_resource_flags(pdev, i) & PCI_BASE_ADDRESS_SPACE_IO) - { /* IO space */ - c->io_mem_addr = addr[i]; - c->io_mem_length = pci_resource_end(pdev, i) - - pci_resource_start(pdev, i) + 1; - if(!request_region( c->io_mem_addr, c->io_mem_length, - "cpqarray")) - { - printk( KERN_WARNING "cpqarray I/O memory range already in use addr %lx length = %ld\n", c->io_mem_addr, c->io_mem_length); - c->io_mem_addr = 0; - c->io_mem_length = 0; - } - break; - } - } - - c->paddr = 0; - for(i=0; i<6; i++) - if (!(pci_resource_flags(pdev, i) & - PCI_BASE_ADDRESS_SPACE_IO)) { - c->paddr = pci_resource_start (pdev, i); - break; - } - if (!c->paddr) - return -1; - c->vaddr = remap_pci_mem(c->paddr, 128); - if (!c->vaddr) - return -1; - c->board_id = board_id; - - for(i=0; i<NR_PRODUCTS; i++) { - if (board_id == products[i].board_id) { - c->product_name = products[i].product_name; - c->access = *(products[i].access); - break; - } - } - if (i == NR_PRODUCTS) { - printk(KERN_WARNING "cpqarray: Sorry, I don't know how" - " to access the SMART Array controller %08lx\n", - (unsigned long)board_id); - return -1; - } - - return 0; -} - -/* - * Map (physical) PCI mem into (virtual) kernel space - */ -static void __iomem *remap_pci_mem(ulong base, ulong size) -{ - ulong page_base = ((ulong) base) & PAGE_MASK; - ulong page_offs = ((ulong) base) - page_base; - void __iomem *page_remapped = ioremap(page_base, page_offs+size); - - return (page_remapped ? (page_remapped + page_offs) : NULL); -} - -#ifndef MODULE -/* - * Config string is a comma separated set of i/o addresses of EISA cards. - */ -static int cpqarray_setup(char *str) -{ - int i, ints[9]; - - (void)get_options(str, ARRAY_SIZE(ints), ints); - - for(i=0; i<ints[0] && i<8; i++) - eisa[i] = ints[i+1]; - return 1; -} - -__setup("smart2=", cpqarray_setup); - -#endif - -/* - * Find an EISA controller's signature. Set up an hba if we find it. - */ -static int cpqarray_eisa_detect(void) -{ - int i=0, j; - __u32 board_id; - int intr; - int ctlr; - int num_ctlr = 0; - - while(i<8 && eisa[i]) { - ctlr = alloc_cpqarray_hba(); - if(ctlr == -1) - break; - board_id = inl(eisa[i]+0xC80); - for(j=0; j < NR_PRODUCTS; j++) - if (board_id == products[j].board_id) - break; - - if (j == NR_PRODUCTS) { - printk(KERN_WARNING "cpqarray: Sorry, I don't know how" - " to access the SMART Array controller %08lx\n", (unsigned long)board_id); - continue; - } - - memset(hba[ctlr], 0, sizeof(ctlr_info_t)); - hba[ctlr]->io_mem_addr = eisa[i]; - hba[ctlr]->io_mem_length = 0x7FF; - if(!request_region(hba[ctlr]->io_mem_addr, - hba[ctlr]->io_mem_length, - "cpqarray")) - { - printk(KERN_WARNING "cpqarray: I/O range already in " - "use addr = %lx length = %ld\n", - hba[ctlr]->io_mem_addr, - hba[ctlr]->io_mem_length); - free_hba(ctlr); - continue; - } - - /* - * Read the config register to find our interrupt - */ - intr = inb(eisa[i]+0xCC0) >> 4; - if (intr & 1) intr = 11; - else if (intr & 2) intr = 10; - else if (intr & 4) intr = 14; - else if (intr & 8) intr = 15; - - hba[ctlr]->intr = intr; - sprintf(hba[ctlr]->devname, "ida%d", nr_ctlr); - hba[ctlr]->product_name = products[j].product_name; - hba[ctlr]->access = *(products[j].access); - hba[ctlr]->ctlr = ctlr; - hba[ctlr]->board_id = board_id; - hba[ctlr]->pci_dev = NULL; /* not PCI */ - -DBGINFO( - printk("i = %d, j = %d\n", i, j); - printk("irq = %x\n", intr); - printk("product name = %s\n", products[j].product_name); - printk("board_id = %x\n", board_id); -); - - num_ctlr++; - i++; - - if (cpqarray_register_ctlr(ctlr, NULL) == -1) - printk(KERN_WARNING - "cpqarray: Can't register EISA controller %d\n", - ctlr); - - } - - return num_ctlr; -} - -/* - * Open. Make sure the device is really there. - */ -static int ida_open(struct block_device *bdev, fmode_t mode) -{ - drv_info_t *drv = get_drv(bdev->bd_disk); - ctlr_info_t *host = get_host(bdev->bd_disk); - - DBGINFO(printk("ida_open %s\n", bdev->bd_disk->disk_name)); - /* - * Root is allowed to open raw volume zero even if it's not configured - * so array config can still work. I don't think I really like this, - * but I'm already using way to many device nodes to claim another one - * for "raw controller". - */ - if (!drv->nr_blks) { - if (!capable(CAP_SYS_RAWIO)) - return -ENXIO; - if (!capable(CAP_SYS_ADMIN) && drv != host->drv) - return -ENXIO; - } - host->usage_count++; - return 0; -} - -static int ida_unlocked_open(struct block_device *bdev, fmode_t mode) -{ - int ret; - - mutex_lock(&cpqarray_mutex); - ret = ida_open(bdev, mode); - mutex_unlock(&cpqarray_mutex); - - return ret; -} - -/* - * Close. Sync first. - */ -static void ida_release(struct gendisk *disk, fmode_t mode) -{ - ctlr_info_t *host; - - mutex_lock(&cpqarray_mutex); - host = get_host(disk); - host->usage_count--; - mutex_unlock(&cpqarray_mutex); -} - -/* - * Enqueuing and dequeuing functions for cmdlists. - */ -static inline void addQ(cmdlist_t **Qptr, cmdlist_t *c) -{ - if (*Qptr == NULL) { - *Qptr = c; - c->next = c->prev = c; - } else { - c->prev = (*Qptr)->prev; - c->next = (*Qptr); - (*Qptr)->prev->next = c; - (*Qptr)->prev = c; - } -} - -static inline cmdlist_t *removeQ(cmdlist_t **Qptr, cmdlist_t *c) -{ - if (c && c->next != c) { - if (*Qptr == c) *Qptr = c->next; - c->prev->next = c->next; - c->next->prev = c->prev; - } else { - *Qptr = NULL; - } - return c; -} - -/* - * Get a request and submit it to the controller. - * This routine needs to grab all the requests it possibly can from the - * req Q and submit them. Interrupts are off (and need to be off) when you - * are in here (either via the dummy do_ida_request functions or by being - * called from the interrupt handler - */ -static void do_ida_request(struct request_queue *q) -{ - ctlr_info_t *h = q->queuedata; - cmdlist_t *c; - struct request *creq; - struct scatterlist tmp_sg[SG_MAX]; - int i, dir, seg; - -queue_next: - creq = blk_peek_request(q); - if (!creq) - goto startio; - - BUG_ON(creq->nr_phys_segments > SG_MAX); - - if ((c = cmd_alloc(h,1)) == NULL) - goto startio; - - blk_start_request(creq); - - c->ctlr = h->ctlr; - c->hdr.unit = (drv_info_t *)(creq->rq_disk->private_data) - h->drv; - c->hdr.size = sizeof(rblk_t) >> 2; - c->size += sizeof(rblk_t); - - c->req.hdr.blk = blk_rq_pos(creq); - c->rq = creq; -DBGPX( - printk("sector=%d, nr_sectors=%u\n", - blk_rq_pos(creq), blk_rq_sectors(creq)); -); - sg_init_table(tmp_sg, SG_MAX); - seg = blk_rq_map_sg(q, creq, tmp_sg); - - /* Now do all the DMA Mappings */ - if (rq_data_dir(creq) == READ) - dir = PCI_DMA_FROMDEVICE; - else - dir = PCI_DMA_TODEVICE; - for( i=0; i < seg; i++) - { - c->req.sg[i].size = tmp_sg[i].length; - c->req.sg[i].addr = (__u32) pci_map_page(h->pci_dev, - sg_page(&tmp_sg[i]), - tmp_sg[i].offset, - tmp_sg[i].length, dir); - } -DBGPX( printk("Submitting %u sectors in %d segments\n", blk_rq_sectors(creq), seg); ); - c->req.hdr.sg_cnt = seg; - c->req.hdr.blk_cnt = blk_rq_sectors(creq); - c->req.hdr.cmd = (rq_data_dir(creq) == READ) ? IDA_READ : IDA_WRITE; - c->type = CMD_RWREQ; - - /* Put the request on the tail of the request queue */ - addQ(&h->reqQ, c); - h->Qdepth++; - if (h->Qdepth > h->maxQsinceinit) - h->maxQsinceinit = h->Qdepth; - - goto queue_next; - -startio: - start_io(h); -} - -/* - * start_io submits everything on a controller's request queue - * and moves it to the completion queue. - * - * Interrupts had better be off if you're in here - */ -static void start_io(ctlr_info_t *h) -{ - cmdlist_t *c; - - while((c = h->reqQ) != NULL) { - /* Can't do anything if we're busy */ - if (h->access.fifo_full(h) == 0) - return; - - /* Get the first entry from the request Q */ - removeQ(&h->reqQ, c); - h->Qdepth--; - - /* Tell the controller to do our bidding */ - h->access.submit_command(h, c); - - /* Get onto the completion Q */ - addQ(&h->cmpQ, c); - } -} - -/* - * Mark all buffers that cmd was responsible for - */ -static inline void complete_command(cmdlist_t *cmd, int timeout) -{ - struct request *rq = cmd->rq; - int error = 0; - int i, ddir; - - if (cmd->req.hdr.rcode & RCODE_NONFATAL && - (hba[cmd->ctlr]->misc_tflags & MISC_NONFATAL_WARN) == 0) { - printk(KERN_NOTICE "Non Fatal error on ida/c%dd%d\n", - cmd->ctlr, cmd->hdr.unit); - hba[cmd->ctlr]->misc_tflags |= MISC_NONFATAL_WARN; - } - if (cmd->req.hdr.rcode & RCODE_FATAL) { - printk(KERN_WARNING "Fatal error on ida/c%dd%d\n", - cmd->ctlr, cmd->hdr.unit); - error = -EIO; - } - if (cmd->req.hdr.rcode & RCODE_INVREQ) { - printk(KERN_WARNING "Invalid request on ida/c%dd%d = (cmd=%x sect=%d cnt=%d sg=%d ret=%x)\n", - cmd->ctlr, cmd->hdr.unit, cmd->req.hdr.cmd, - cmd->req.hdr.blk, cmd->req.hdr.blk_cnt, - cmd->req.hdr.sg_cnt, cmd->req.hdr.rcode); - error = -EIO; - } - if (timeout) - error = -EIO; - /* unmap the DMA mapping for all the scatter gather elements */ - if (cmd->req.hdr.cmd == IDA_READ) - ddir = PCI_DMA_FROMDEVICE; - else - ddir = PCI_DMA_TODEVICE; - for(i=0; i<cmd->req.hdr.sg_cnt; i++) - pci_unmap_page(hba[cmd->ctlr]->pci_dev, cmd->req.sg[i].addr, - cmd->req.sg[i].size, ddir); - - DBGPX(printk("Done with %p\n", rq);); - __blk_end_request_all(rq, error); -} - -/* - * The controller will interrupt us upon completion of commands. - * Find the command on the completion queue, remove it, tell the OS and - * try to queue up more IO - */ -static irqreturn_t do_ida_intr(int irq, void *dev_id) -{ - ctlr_info_t *h = dev_id; - cmdlist_t *c; - unsigned long istat; - unsigned long flags; - __u32 a,a1; - - istat = h->access.intr_pending(h); - /* Is this interrupt for us? */ - if (istat == 0) - return IRQ_NONE; - - /* - * If there are completed commands in the completion queue, - * we had better do something about it. - */ - spin_lock_irqsave(IDA_LOCK(h->ctlr), flags); - if (istat & FIFO_NOT_EMPTY) { - while((a = h->access.command_completed(h))) { - a1 = a; a &= ~3; - if ((c = h->cmpQ) == NULL) - { - printk(KERN_WARNING "cpqarray: Completion of %08lx ignored\n", (unsigned long)a1); - continue; - } - while(c->busaddr != a) { - c = c->next; - if (c == h->cmpQ) - break; - } - /* - * If we've found the command, take it off the - * completion Q and free it - */ - if (c->busaddr == a) { - removeQ(&h->cmpQ, c); - /* Check for invalid command. - * Controller returns command error, - * But rcode = 0. - */ - - if((a1 & 0x03) && (c->req.hdr.rcode == 0)) - { - c->req.hdr.rcode = RCODE_INVREQ; - } - if (c->type == CMD_RWREQ) { - complete_command(c, 0); - cmd_free(h, c, 1); - } else if (c->type == CMD_IOCTL_PEND) { - c->type = CMD_IOCTL_DONE; - } - continue; - } - } - } - - /* - * See if we can queue up some more IO - */ - do_ida_request(h->queue); - spin_unlock_irqrestore(IDA_LOCK(h->ctlr), flags); - return IRQ_HANDLED; -} - -/* - * This timer was for timing out requests that haven't happened after - * IDA_TIMEOUT. That wasn't such a good idea. This timer is used to - * reset a flags structure so we don't flood the user with - * "Non-Fatal error" messages. - */ -static void ida_timer(unsigned long tdata) -{ - ctlr_info_t *h = (ctlr_info_t*)tdata; - - h->timer.expires = jiffies + IDA_TIMER; - add_timer(&h->timer); - h->misc_tflags = 0; -} - -static int ida_getgeo(struct block_device *bdev, struct hd_geometry *geo) -{ - drv_info_t *drv = get_drv(bdev->bd_disk); - - if (drv->cylinders) { - geo->heads = drv->heads; - geo->sectors = drv->sectors; - geo->cylinders = drv->cylinders; - } else { - geo->heads = 0xff; - geo->sectors = 0x3f; - geo->cylinders = drv->nr_blks / (0xff*0x3f); - } - - return 0; -} - -/* - * ida_ioctl does some miscellaneous stuff like reporting drive geometry, - * setting readahead and submitting commands from userspace to the controller. - */ -static int ida_locked_ioctl(struct block_device *bdev, fmode_t mode, unsigned int cmd, unsigned long arg) -{ - drv_info_t *drv = get_drv(bdev->bd_disk); - ctlr_info_t *host = get_host(bdev->bd_disk); - int error; - ida_ioctl_t __user *io = (ida_ioctl_t __user *)arg; - ida_ioctl_t *my_io; - - switch(cmd) { - case IDAGETDRVINFO: - if (copy_to_user(&io->c.drv, drv, sizeof(drv_info_t))) - return -EFAULT; - return 0; - case IDAPASSTHRU: - if (!capable(CAP_SYS_RAWIO)) - return -EPERM; - my_io = kmalloc(sizeof(ida_ioctl_t), GFP_KERNEL); - if (!my_io) - return -ENOMEM; - error = -EFAULT; - if (copy_from_user(my_io, io, sizeof(*my_io))) - goto out_passthru; - error = ida_ctlr_ioctl(host, drv - host->drv, my_io); - if (error) - goto out_passthru; - error = -EFAULT; - if (copy_to_user(io, my_io, sizeof(*my_io))) - goto out_passthru; - error = 0; -out_passthru: - kfree(my_io); - return error; - case IDAGETCTLRSIG: - if (!arg) return -EINVAL; - if (put_user(host->ctlr_sig, (int __user *)arg)) - return -EFAULT; - return 0; - case IDAREVALIDATEVOLS: - if (MINOR(bdev->bd_dev) != 0) - return -ENXIO; - return revalidate_allvol(host); - case IDADRIVERVERSION: - if (!arg) return -EINVAL; - if (put_user(DRIVER_VERSION, (unsigned long __user *)arg)) - return -EFAULT; - return 0; - case IDAGETPCIINFO: - { - - ida_pci_info_struct pciinfo; - - if (!arg) return -EINVAL; - memset(&pciinfo, 0, sizeof(pciinfo)); - pciinfo.bus = host->pci_dev->bus->number; - pciinfo.dev_fn = host->pci_dev->devfn; - pciinfo.board_id = host->board_id; - if(copy_to_user((void __user *) arg, &pciinfo, - sizeof( ida_pci_info_struct))) - return -EFAULT; - return(0); - } - - default: - return -EINVAL; - } - -} - -static int ida_ioctl(struct block_device *bdev, fmode_t mode, - unsigned int cmd, unsigned long param) -{ - int ret; - - mutex_lock(&cpqarray_mutex); - ret = ida_locked_ioctl(bdev, mode, cmd, param); - mutex_unlock(&cpqarray_mutex); - - return ret; -} - -/* - * ida_ctlr_ioctl is for passing commands to the controller from userspace. - * The command block (io) has already been copied to kernel space for us, - * however, any elements in the sglist need to be copied to kernel space - * or copied back to userspace. - * - * Only root may perform a controller passthru command, however I'm not doing - * any serious sanity checking on the arguments. Doing an IDA_WRITE_MEDIA and - * putting a 64M buffer in the sglist is probably a *bad* idea. - */ -static int ida_ctlr_ioctl(ctlr_info_t *h, int dsk, ida_ioctl_t *io) -{ - int ctlr = h->ctlr; - cmdlist_t *c; - void *p = NULL; - unsigned long flags; - int error; - - if ((c = cmd_alloc(h, 0)) == NULL) - return -ENOMEM; - c->ctlr = ctlr; - c->hdr.unit = (io->unit & UNITVALID) ? (io->unit & ~UNITVALID) : dsk; - c->hdr.size = sizeof(rblk_t) >> 2; - c->size += sizeof(rblk_t); - - c->req.hdr.cmd = io->cmd; - c->req.hdr.blk = io->blk; - c->req.hdr.blk_cnt = io->blk_cnt; - c->type = CMD_IOCTL_PEND; - - /* Pre submit processing */ - switch(io->cmd) { - case PASSTHRU_A: - p = memdup_user(io->sg[0].addr, io->sg[0].size); - if (IS_ERR(p)) { - error = PTR_ERR(p); - cmd_free(h, c, 0); - return error; - } - c->req.hdr.blk = pci_map_single(h->pci_dev, &(io->c), - sizeof(ida_ioctl_t), - PCI_DMA_BIDIRECTIONAL); - c->req.sg[0].size = io->sg[0].size; - c->req.sg[0].addr = pci_map_single(h->pci_dev, p, - c->req.sg[0].size, PCI_DMA_BIDIRECTIONAL); - c->req.hdr.sg_cnt = 1; - break; - case IDA_READ: - case READ_FLASH_ROM: - case SENSE_CONTROLLER_PERFORMANCE: - p = kmalloc(io->sg[0].size, GFP_KERNEL); - if (!p) - { - error = -ENOMEM; - cmd_free(h, c, 0); - return(error); - } - - c->req.sg[0].size = io->sg[0].size; - c->req.sg[0].addr = pci_map_single(h->pci_dev, p, - c->req.sg[0].size, PCI_DMA_BIDIRECTIONAL); - c->req.hdr.sg_cnt = 1; - break; - case IDA_WRITE: - case IDA_WRITE_MEDIA: - case DIAG_PASS_THRU: - case COLLECT_BUFFER: - case WRITE_FLASH_ROM: - p = memdup_user(io->sg[0].addr, io->sg[0].size); - if (IS_ERR(p)) { - error = PTR_ERR(p); - cmd_free(h, c, 0); - return error; - } - c->req.sg[0].size = io->sg[0].size; - c->req.sg[0].addr = pci_map_single(h->pci_dev, p, - c->req.sg[0].size, PCI_DMA_BIDIRECTIONAL); - c->req.hdr.sg_cnt = 1; - break; - default: - c->req.sg[0].size = sizeof(io->c); - c->req.sg[0].addr = pci_map_single(h->pci_dev,&io->c, - c->req.sg[0].size, PCI_DMA_BIDIRECTIONAL); - c->req.hdr.sg_cnt = 1; - } - - /* Put the request on the tail of the request queue */ - spin_lock_irqsave(IDA_LOCK(ctlr), flags); - addQ(&h->reqQ, c); - h->Qdepth++; - start_io(h); - spin_unlock_irqrestore(IDA_LOCK(ctlr), flags); - - /* Wait for completion */ - while(c->type != CMD_IOCTL_DONE) - schedule(); - - /* Unmap the DMA */ - pci_unmap_single(h->pci_dev, c->req.sg[0].addr, c->req.sg[0].size, - PCI_DMA_BIDIRECTIONAL); - /* Post submit processing */ - switch(io->cmd) { - case PASSTHRU_A: - pci_unmap_single(h->pci_dev, c->req.hdr.blk, - sizeof(ida_ioctl_t), - PCI_DMA_BIDIRECTIONAL); - case IDA_READ: - case DIAG_PASS_THRU: - case SENSE_CONTROLLER_PERFORMANCE: - case READ_FLASH_ROM: - if (copy_to_user(io->sg[0].addr, p, io->sg[0].size)) { - kfree(p); - return -EFAULT; - } - /* fall through and free p */ - case IDA_WRITE: - case IDA_WRITE_MEDIA: - case COLLECT_BUFFER: - case WRITE_FLASH_ROM: - kfree(p); - break; - default:; - /* Nothing to do */ - } - - io->rcode = c->req.hdr.rcode; - cmd_free(h, c, 0); - return(0); -} - -/* - * Commands are pre-allocated in a large block. Here we use a simple bitmap - * scheme to suballocte them to the driver. Operations that are not time - * critical (and can wait for kmalloc and possibly sleep) can pass in NULL - * as the first argument to get a new command. - */ -static cmdlist_t * cmd_alloc(ctlr_info_t *h, int get_from_pool) -{ - cmdlist_t * c; - int i; - dma_addr_t cmd_dhandle; - - if (!get_from_pool) { - c = (cmdlist_t*)pci_alloc_consistent(h->pci_dev, - sizeof(cmdlist_t), &cmd_dhandle); - if(c==NULL) - return NULL; - } else { - do { - i = find_first_zero_bit(h->cmd_pool_bits, NR_CMDS); - if (i == NR_CMDS) - return NULL; - } while(test_and_set_bit(i&(BITS_PER_LONG-1), h->cmd_pool_bits+(i/BITS_PER_LONG)) != 0); - c = h->cmd_pool + i; - cmd_dhandle = h->cmd_pool_dhandle + i*sizeof(cmdlist_t); - h->nr_allocs++; - } - - memset(c, 0, sizeof(cmdlist_t)); - c->busaddr = cmd_dhandle; - return c; -} - -static void cmd_free(ctlr_info_t *h, cmdlist_t *c, int got_from_pool) -{ - int i; - - if (!got_from_pool) { - pci_free_consistent(h->pci_dev, sizeof(cmdlist_t), c, - c->busaddr); - } else { - i = c - h->cmd_pool; - clear_bit(i&(BITS_PER_LONG-1), h->cmd_pool_bits+(i/BITS_PER_LONG)); - h->nr_frees++; - } -} - -/*********************************************************************** - name: sendcmd - Send a command to an IDA using the memory mapped FIFO interface - and wait for it to complete. - This routine should only be called at init time. -***********************************************************************/ -static int sendcmd( - __u8 cmd, - int ctlr, - void *buff, - size_t size, - unsigned int blk, - unsigned int blkcnt, - unsigned int log_unit ) -{ - cmdlist_t *c; - int complete; - unsigned long temp; - unsigned long i; - ctlr_info_t *info_p = hba[ctlr]; - - c = cmd_alloc(info_p, 1); - if(!c) - return IO_ERROR; - c->ctlr = ctlr; - c->hdr.unit = log_unit; - c->hdr.prio = 0; - c->hdr.size = sizeof(rblk_t) >> 2; - c->size += sizeof(rblk_t); - - /* The request information. */ - c->req.hdr.next = 0; - c->req.hdr.rcode = 0; - c->req.bp = 0; - c->req.hdr.sg_cnt = 1; - c->req.hdr.reserved = 0; - - if (size == 0) - c->req.sg[0].size = 512; - else - c->req.sg[0].size = size; - - c->req.hdr.blk = blk; - c->req.hdr.blk_cnt = blkcnt; - c->req.hdr.cmd = (unsigned char) cmd; - c->req.sg[0].addr = (__u32) pci_map_single(info_p->pci_dev, - buff, c->req.sg[0].size, PCI_DMA_BIDIRECTIONAL); - /* - * Disable interrupt - */ - info_p->access.set_intr_mask(info_p, 0); - /* Make sure there is room in the command FIFO */ - /* Actually it should be completely empty at this time. */ - for (i = 200000; i > 0; i--) { - temp = info_p->access.fifo_full(info_p); - if (temp != 0) { - break; - } - udelay(10); -DBG( - printk(KERN_WARNING "cpqarray ida%d: idaSendPciCmd FIFO full," - " waiting!\n", ctlr); -); - } - /* - * Send the cmd - */ - info_p->access.submit_command(info_p, c); - complete = pollcomplete(ctlr); - - pci_unmap_single(info_p->pci_dev, (dma_addr_t) c->req.sg[0].addr, - c->req.sg[0].size, PCI_DMA_BIDIRECTIONAL); - if (complete != 1) { - if (complete != c->busaddr) { - printk( KERN_WARNING - "cpqarray ida%d: idaSendPciCmd " - "Invalid command list address returned! (%08lx)\n", - ctlr, (unsigned long)complete); - cmd_free(info_p, c, 1); - return (IO_ERROR); - } - } else { - printk( KERN_WARNING - "cpqarray ida%d: idaSendPciCmd Timeout out, " - "No command list address returned!\n", - ctlr); - cmd_free(info_p, c, 1); - return (IO_ERROR); - } - - if (c->req.hdr.rcode & 0x00FE) { - if (!(c->req.hdr.rcode & BIG_PROBLEM)) { - printk( KERN_WARNING - "cpqarray ida%d: idaSendPciCmd, error: " - "Controller failed at init time " - "cmd: 0x%x, return code = 0x%x\n", - ctlr, c->req.hdr.cmd, c->req.hdr.rcode); - - cmd_free(info_p, c, 1); - return (IO_ERROR); - } - } - cmd_free(info_p, c, 1); - return (IO_OK); -} - -/* - * revalidate_allvol is for online array config utilities. After a - * utility reconfigures the drives in the array, it can use this function - * (through an ioctl) to make the driver zap any previous disk structs for - * that controller and get new ones. - * - * Right now I'm using the getgeometry() function to do this, but this - * function should probably be finer grained and allow you to revalidate one - * particualar logical volume (instead of all of them on a particular - * controller). - */ -static int revalidate_allvol(ctlr_info_t *host) -{ - int ctlr = host->ctlr; - int i; - unsigned long flags; - - spin_lock_irqsave(IDA_LOCK(ctlr), flags); - if (host->usage_count > 1) { - spin_unlock_irqrestore(IDA_LOCK(ctlr), flags); - printk(KERN_WARNING "cpqarray: Device busy for volume" - " revalidation (usage=%d)\n", host->usage_count); - return -EBUSY; - } - host->usage_count++; - spin_unlock_irqrestore(IDA_LOCK(ctlr), flags); - - /* - * Set the partition and block size structures for all volumes - * on this controller to zero. We will reread all of this data - */ - set_capacity(ida_gendisk[ctlr][0], 0); - for (i = 1; i < NWD; i++) { - struct gendisk *disk = ida_gendisk[ctlr][i]; - if (disk->flags & GENHD_FL_UP) - del_gendisk(disk); - } - memset(host->drv, 0, sizeof(drv_info_t)*NWD); - - /* - * Tell the array controller not to give us any interrupts while - * we check the new geometry. Then turn interrupts back on when - * we're done. - */ - host->access.set_intr_mask(host, 0); - getgeometry(ctlr); - host->access.set_intr_mask(host, FIFO_NOT_EMPTY); - - for(i=0; i<NWD; i++) { - struct gendisk *disk = ida_gendisk[ctlr][i]; - drv_info_t *drv = &host->drv[i]; - if (i && !drv->nr_blks) - continue; - blk_queue_logical_block_size(host->queue, drv->blk_size); - set_capacity(disk, drv->nr_blks); - disk->queue = host->queue; - disk->private_data = drv; - if (i) - add_disk(disk); - } - - host->usage_count--; - return 0; -} - -static int ida_revalidate(struct gendisk *disk) -{ - drv_info_t *drv = disk->private_data; - set_capacity(disk, drv->nr_blks); - return 0; -} - -/******************************************************************** - name: pollcomplete - Wait polling for a command to complete. - The memory mapped FIFO is polled for the completion. - Used only at init time, interrupts disabled. - ********************************************************************/ -static int pollcomplete(int ctlr) -{ - int done; - int i; - - /* Wait (up to 2 seconds) for a command to complete */ - - for (i = 200000; i > 0; i--) { - done = hba[ctlr]->access.command_completed(hba[ctlr]); - if (done == 0) { - udelay(10); /* a short fixed delay */ - } else - return (done); - } - /* Invalid address to tell caller we ran out of time */ - return 1; -} -/***************************************************************** - start_fwbk - Starts controller firmwares background processing. - Currently only the Integrated Raid controller needs this done. - If the PCI mem address registers are written to after this, - data corruption may occur -*****************************************************************/ -static void start_fwbk(int ctlr) -{ - id_ctlr_t *id_ctlr_buf; - int ret_code; - - if( (hba[ctlr]->board_id != 0x40400E11) - && (hba[ctlr]->board_id != 0x40480E11) ) - - /* Not a Integrated Raid, so there is nothing for us to do */ - return; - printk(KERN_DEBUG "cpqarray: Starting firmware's background" - " processing\n"); - /* Command does not return anything, but idasend command needs a - buffer */ - id_ctlr_buf = kmalloc(sizeof(id_ctlr_t), GFP_KERNEL); - if(id_ctlr_buf==NULL) - { - printk(KERN_WARNING "cpqarray: Out of memory. " - "Unable to start background processing.\n"); - return; - } - ret_code = sendcmd(RESUME_BACKGROUND_ACTIVITY, ctlr, - id_ctlr_buf, 0, 0, 0, 0); - if(ret_code != IO_OK) - printk(KERN_WARNING "cpqarray: Unable to start" - " background processing\n"); - - kfree(id_ctlr_buf); -} -/***************************************************************** - getgeometry - Get ida logical volume geometry from the controller - This is a large bit of code which once existed in two flavors, - It is used only at init time. -*****************************************************************/ -static void getgeometry(int ctlr) -{ - id_log_drv_t *id_ldrive; - id_ctlr_t *id_ctlr_buf; - sense_log_drv_stat_t *id_lstatus_buf; - config_t *sense_config_buf; - unsigned int log_unit, log_index; - int ret_code, size; - drv_info_t *drv; - ctlr_info_t *info_p = hba[ctlr]; - int i; - - info_p->log_drv_map = 0; - - id_ldrive = kzalloc(sizeof(id_log_drv_t), GFP_KERNEL); - if (!id_ldrive) { - printk( KERN_ERR "cpqarray: out of memory.\n"); - goto err_0; - } - - id_ctlr_buf = kzalloc(sizeof(id_ctlr_t), GFP_KERNEL); - if (!id_ctlr_buf) { - printk( KERN_ERR "cpqarray: out of memory.\n"); - goto err_1; - } - - id_lstatus_buf = kzalloc(sizeof(sense_log_drv_stat_t), GFP_KERNEL); - if (!id_lstatus_buf) { - printk( KERN_ERR "cpqarray: out of memory.\n"); - goto err_2; - } - - sense_config_buf = kzalloc(sizeof(config_t), GFP_KERNEL); - if (!sense_config_buf) { - printk( KERN_ERR "cpqarray: out of memory.\n"); - goto err_3; - } - - info_p->phys_drives = 0; - info_p->log_drv_map = 0; - info_p->drv_assign_map = 0; - info_p->drv_spare_map = 0; - info_p->mp_failed_drv_map = 0; /* only initialized here */ - /* Get controllers info for this logical drive */ - ret_code = sendcmd(ID_CTLR, ctlr, id_ctlr_buf, 0, 0, 0, 0); - if (ret_code == IO_ERROR) { - /* - * If can't get controller info, set the logical drive map to 0, - * so the idastubopen will fail on all logical drives - * on the controller. - */ - printk(KERN_ERR "cpqarray: error sending ID controller\n"); - goto err_4; - } - - info_p->log_drives = id_ctlr_buf->nr_drvs; - for(i=0;i<4;i++) - info_p->firm_rev[i] = id_ctlr_buf->firm_rev[i]; - info_p->ctlr_sig = id_ctlr_buf->cfg_sig; - - printk(" (%s)\n", info_p->product_name); - /* - * Initialize logical drive map to zero - */ - log_index = 0; - /* - * Get drive geometry for all logical drives - */ - if (id_ctlr_buf->nr_drvs > 16) - printk(KERN_WARNING "cpqarray ida%d: This driver supports " - "16 logical drives per controller.\n. " - " Additional drives will not be " - "detected\n", ctlr); - - for (log_unit = 0; - (log_index < id_ctlr_buf->nr_drvs) - && (log_unit < NWD); - log_unit++) { - size = sizeof(sense_log_drv_stat_t); - - /* - Send "Identify logical drive status" cmd - */ - ret_code = sendcmd(SENSE_LOG_DRV_STAT, - ctlr, id_lstatus_buf, size, 0, 0, log_unit); - if (ret_code == IO_ERROR) { - /* - If can't get logical drive status, set - the logical drive map to 0, so the - idastubopen will fail for all logical drives - on the controller. - */ - info_p->log_drv_map = 0; - printk( KERN_WARNING - "cpqarray ida%d: idaGetGeometry - Controller" - " failed to report status of logical drive %d\n" - "Access to this controller has been disabled\n", - ctlr, log_unit); - goto err_4; - } - /* - Make sure the logical drive is configured - */ - if (id_lstatus_buf->status != LOG_NOT_CONF) { - ret_code = sendcmd(ID_LOG_DRV, ctlr, id_ldrive, - sizeof(id_log_drv_t), 0, 0, log_unit); - /* - If error, the bit for this - logical drive won't be set and - idastubopen will return error. - */ - if (ret_code != IO_ERROR) { - drv = &info_p->drv[log_unit]; - drv->blk_size = id_ldrive->blk_size; - drv->nr_blks = id_ldrive->nr_blks; - drv->cylinders = id_ldrive->drv.cyl; - drv->heads = id_ldrive->drv.heads; - drv->sectors = id_ldrive->drv.sect_per_track; - info_p->log_drv_map |= (1 << log_unit); - - printk(KERN_INFO "cpqarray ida/c%dd%d: blksz=%d nr_blks=%d\n", - ctlr, log_unit, drv->blk_size, drv->nr_blks); - ret_code = sendcmd(SENSE_CONFIG, - ctlr, sense_config_buf, - sizeof(config_t), 0, 0, log_unit); - if (ret_code == IO_ERROR) { - info_p->log_drv_map = 0; - printk(KERN_ERR "cpqarray: error sending sense config\n"); - goto err_4; - } - - info_p->phys_drives = - sense_config_buf->ctlr_phys_drv; - info_p->drv_assign_map - |= sense_config_buf->drv_asgn_map; - info_p->drv_assign_map - |= sense_config_buf->spare_asgn_map; - info_p->drv_spare_map - |= sense_config_buf->spare_asgn_map; - } /* end of if no error on id_ldrive */ - log_index = log_index + 1; - } /* end of if logical drive configured */ - } /* end of for log_unit */ - - /* Free all the buffers and return */ -err_4: - kfree(sense_config_buf); -err_3: - kfree(id_lstatus_buf); -err_2: - kfree(id_ctlr_buf); -err_1: - kfree(id_ldrive); -err_0: - return; -} - -static void __exit cpqarray_exit(void) -{ - int i; - - pci_unregister_driver(&cpqarray_pci_driver); - - /* Double check that all controller entries have been removed */ - for(i=0; i<MAX_CTLR; i++) { - if (hba[i] != NULL) { - printk(KERN_WARNING "cpqarray: Removing EISA " - "controller %d\n", i); - cpqarray_remove_one_eisa(i); - } - } - - remove_proc_entry("driver/cpqarray", NULL); -} - -module_init(cpqarray_init) -module_exit(cpqarray_exit) |