summaryrefslogtreecommitdiff
path: root/drivers/block/paride/Kconfig
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/block/paride/Kconfig')
-rw-r--r--drivers/block/paride/Kconfig300
1 files changed, 300 insertions, 0 deletions
diff --git a/drivers/block/paride/Kconfig b/drivers/block/paride/Kconfig
new file mode 100644
index 000000000..efefb5ac3
--- /dev/null
+++ b/drivers/block/paride/Kconfig
@@ -0,0 +1,300 @@
+#
+# PARIDE configuration
+#
+# PARIDE doesn't need PARPORT, but if PARPORT is configured as a module,
+# PARIDE must also be a module.
+# PARIDE only supports PC style parports. Tough for USB or other parports...
+
+comment "Parallel IDE high-level drivers"
+ depends on PARIDE
+
+config PARIDE_PD
+ tristate "Parallel port IDE disks"
+ depends on PARIDE
+ help
+ This option enables the high-level driver for IDE-type disk devices
+ connected through a parallel port. If you chose to build PARIDE
+ support into your kernel, you may answer Y here to build in the
+ parallel port IDE driver, otherwise you should answer M to build
+ it as a loadable module. The module will be called pd. You
+ must also have at least one parallel port protocol driver in your
+ system. Among the devices supported by this driver are the SyQuest
+ EZ-135, EZ-230 and SparQ drives, the Avatar Shark and the backpack
+ hard drives from MicroSolutions.
+
+config PARIDE_PCD
+ tristate "Parallel port ATAPI CD-ROMs"
+ depends on PARIDE
+ ---help---
+ This option enables the high-level driver for ATAPI CD-ROM devices
+ connected through a parallel port. If you chose to build PARIDE
+ support into your kernel, you may answer Y here to build in the
+ parallel port ATAPI CD-ROM driver, otherwise you should answer M to
+ build it as a loadable module. The module will be called pcd. You
+ must also have at least one parallel port protocol driver in your
+ system. Among the devices supported by this driver are the
+ MicroSolutions backpack CD-ROM drives and the Freecom Power CD. If
+ you have such a CD-ROM drive, you should also say Y or M to "ISO
+ 9660 CD-ROM file system support" below, because that's the file
+ system used on CD-ROMs.
+
+config PARIDE_PF
+ tristate "Parallel port ATAPI disks"
+ depends on PARIDE
+ help
+ This option enables the high-level driver for ATAPI disk devices
+ connected through a parallel port. If you chose to build PARIDE
+ support into your kernel, you may answer Y here to build in the
+ parallel port ATAPI disk driver, otherwise you should answer M
+ to build it as a loadable module. The module will be called pf.
+ You must also have at least one parallel port protocol driver in
+ your system. Among the devices supported by this driver are the
+ MicroSolutions backpack PD/CD drive and the Imation Superdisk
+ LS-120 drive.
+
+config PARIDE_PT
+ tristate "Parallel port ATAPI tapes"
+ depends on PARIDE
+ help
+ This option enables the high-level driver for ATAPI tape devices
+ connected through a parallel port. If you chose to build PARIDE
+ support into your kernel, you may answer Y here to build in the
+ parallel port ATAPI disk driver, otherwise you should answer M
+ to build it as a loadable module. The module will be called pt.
+ You must also have at least one parallel port protocol driver in
+ your system. Among the devices supported by this driver is the
+ parallel port version of the HP 5GB drive.
+
+config PARIDE_PG
+ tristate "Parallel port generic ATAPI devices"
+ depends on PARIDE
+ ---help---
+ This option enables a special high-level driver for generic ATAPI
+ devices connected through a parallel port. The driver allows user
+ programs, such as cdrtools, to send ATAPI commands directly to a
+ device.
+
+ If you chose to build PARIDE support into your kernel, you may
+ answer Y here to build in the parallel port generic ATAPI driver,
+ otherwise you should answer M to build it as a loadable module. The
+ module will be called pg.
+
+ You must also have at least one parallel port protocol driver in
+ your system.
+
+ This driver implements an API loosely related to the generic SCSI
+ driver. See <file:include/linux/pg.h>. for details.
+
+ You can obtain the most recent version of cdrtools from
+ <ftp://ftp.berlios.de/pub/cdrecord/>. Versions 1.6.1a3 and
+ later fully support this driver.
+
+comment "Parallel IDE protocol modules"
+ depends on PARIDE
+
+config PARIDE_ATEN
+ tristate "ATEN EH-100 protocol"
+ depends on PARIDE
+ help
+ This option enables support for the ATEN EH-100 parallel port IDE
+ protocol. This protocol is used in some inexpensive low performance
+ parallel port kits made in Hong Kong. If you chose to build PARIDE
+ support into your kernel, you may answer Y here to build in the
+ protocol driver, otherwise you should answer M to build it as a
+ loadable module. The module will be called aten. You must also
+ have a high-level driver for the type of device that you want to
+ support.
+
+config PARIDE_BPCK
+ tristate "MicroSolutions backpack (Series 5) protocol"
+ depends on PARIDE
+ ---help---
+ This option enables support for the Micro Solutions BACKPACK
+ parallel port Series 5 IDE protocol. (Most BACKPACK drives made
+ before 1999 were Series 5) Series 5 drives will NOT always have the
+ Series noted on the bottom of the drive. Series 6 drivers will.
+
+ In other words, if your BACKPACK drive doesn't say "Series 6" on the
+ bottom, enable this option.
+
+ If you chose to build PARIDE support into your kernel, you may
+ answer Y here to build in the protocol driver, otherwise you should
+ answer M to build it as a loadable module. The module will be
+ called bpck. You must also have a high-level driver for the type
+ of device that you want to support.
+
+config PARIDE_BPCK6
+ tristate "MicroSolutions backpack (Series 6) protocol"
+ depends on PARIDE && !64BIT
+ ---help---
+ This option enables support for the Micro Solutions BACKPACK
+ parallel port Series 6 IDE protocol. (Most BACKPACK drives made
+ after 1999 were Series 6) Series 6 drives will have the Series noted
+ on the bottom of the drive. Series 5 drivers don't always have it
+ noted.
+
+ In other words, if your BACKPACK drive says "Series 6" on the
+ bottom, enable this option.
+
+ If you chose to build PARIDE support into your kernel, you may
+ answer Y here to build in the protocol driver, otherwise you should
+ answer M to build it as a loadable module. The module will be
+ called bpck6. You must also have a high-level driver for the type
+ of device that you want to support.
+
+config PARIDE_COMM
+ tristate "DataStor Commuter protocol"
+ depends on PARIDE
+ help
+ This option enables support for the Commuter parallel port IDE
+ protocol from DataStor. If you chose to build PARIDE support
+ into your kernel, you may answer Y here to build in the protocol
+ driver, otherwise you should answer M to build it as a loadable
+ module. The module will be called comm. You must also have
+ a high-level driver for the type of device that you want to support.
+
+config PARIDE_DSTR
+ tristate "DataStor EP-2000 protocol"
+ depends on PARIDE
+ help
+ This option enables support for the EP-2000 parallel port IDE
+ protocol from DataStor. If you chose to build PARIDE support
+ into your kernel, you may answer Y here to build in the protocol
+ driver, otherwise you should answer M to build it as a loadable
+ module. The module will be called dstr. You must also have
+ a high-level driver for the type of device that you want to support.
+
+config PARIDE_FIT2
+ tristate "FIT TD-2000 protocol"
+ depends on PARIDE
+ help
+ This option enables support for the TD-2000 parallel port IDE
+ protocol from Fidelity International Technology. This is a simple
+ (low speed) adapter that is used in some portable hard drives. If
+ you chose to build PARIDE support into your kernel, you may answer Y
+ here to build in the protocol driver, otherwise you should answer M
+ to build it as a loadable module. The module will be called ktti.
+ You must also have a high-level driver for the type of device that
+ you want to support.
+
+config PARIDE_FIT3
+ tristate "FIT TD-3000 protocol"
+ depends on PARIDE
+ help
+ This option enables support for the TD-3000 parallel port IDE
+ protocol from Fidelity International Technology. This protocol is
+ used in newer models of their portable disk, CD-ROM and PD/CD
+ devices. If you chose to build PARIDE support into your kernel, you
+ may answer Y here to build in the protocol driver, otherwise you
+ should answer M to build it as a loadable module. The module will be
+ called fit3. You must also have a high-level driver for the type
+ of device that you want to support.
+
+config PARIDE_EPAT
+ tristate "Shuttle EPAT/EPEZ protocol"
+ depends on PARIDE
+ help
+ This option enables support for the EPAT parallel port IDE protocol.
+ EPAT is a parallel port IDE adapter manufactured by Shuttle
+ Technology and widely used in devices from major vendors such as
+ Hewlett-Packard, SyQuest, Imation and Avatar. If you chose to build
+ PARIDE support into your kernel, you may answer Y here to build in
+ the protocol driver, otherwise you should answer M to build it as a
+ loadable module. The module will be called epat. You must also
+ have a high-level driver for the type of device that you want to
+ support.
+
+config PARIDE_EPATC8
+ bool "Support c7/c8 chips"
+ depends on PARIDE_EPAT
+ help
+ This option enables support for the newer Shuttle EP1284 (aka c7 and
+ c8) chip. You need this if you are using any recent Imation SuperDisk
+ (LS-120) drive.
+
+config PARIDE_EPIA
+ tristate "Shuttle EPIA protocol"
+ depends on PARIDE
+ help
+ This option enables support for the (obsolete) EPIA parallel port
+ IDE protocol from Shuttle Technology. This adapter can still be
+ found in some no-name kits. If you chose to build PARIDE support
+ into your kernel, you may answer Y here to build in the protocol
+ driver, otherwise you should answer M to build it as a loadable
+ module. The module will be called epia. You must also have a
+ high-level driver for the type of device that you want to support.
+
+config PARIDE_FRIQ
+ tristate "Freecom IQ ASIC-2 protocol"
+ depends on PARIDE
+ help
+ This option enables support for version 2 of the Freecom IQ parallel
+ port IDE adapter. This adapter is used by the Maxell Superdisk
+ drive. If you chose to build PARIDE support into your kernel, you
+ may answer Y here to build in the protocol driver, otherwise you
+ should answer M to build it as a loadable module. The module will be
+ called friq. You must also have a high-level driver for the type
+ of device that you want to support.
+
+config PARIDE_FRPW
+ tristate "FreeCom power protocol"
+ depends on PARIDE
+ help
+ This option enables support for the Freecom power parallel port IDE
+ protocol. If you chose to build PARIDE support into your kernel, you
+ may answer Y here to build in the protocol driver, otherwise you
+ should answer M to build it as a loadable module. The module will be
+ called frpw. You must also have a high-level driver for the type
+ of device that you want to support.
+
+config PARIDE_KBIC
+ tristate "KingByte KBIC-951A/971A protocols"
+ depends on PARIDE
+ help
+ This option enables support for the KBIC-951A and KBIC-971A parallel
+ port IDE protocols from KingByte Information Corp. KingByte's
+ adapters appear in many no-name portable disk and CD-ROM products,
+ especially in Europe. If you chose to build PARIDE support into your
+ kernel, you may answer Y here to build in the protocol driver,
+ otherwise you should answer M to build it as a loadable module. The
+ module will be called kbic. You must also have a high-level driver
+ for the type of device that you want to support.
+
+config PARIDE_KTTI
+ tristate "KT PHd protocol"
+ depends on PARIDE
+ help
+ This option enables support for the "PHd" parallel port IDE protocol
+ from KT Technology. This is a simple (low speed) adapter that is
+ used in some 2.5" portable hard drives. If you chose to build PARIDE
+ support into your kernel, you may answer Y here to build in the
+ protocol driver, otherwise you should answer M to build it as a
+ loadable module. The module will be called ktti. You must also
+ have a high-level driver for the type of device that you want to
+ support.
+
+config PARIDE_ON20
+ tristate "OnSpec 90c20 protocol"
+ depends on PARIDE
+ help
+ This option enables support for the (obsolete) 90c20 parallel port
+ IDE protocol from OnSpec (often marketed under the ValuStore brand
+ name). If you chose to build PARIDE support into your kernel, you
+ may answer Y here to build in the protocol driver, otherwise you
+ should answer M to build it as a loadable module. The module will
+ be called on20. You must also have a high-level driver for the
+ type of device that you want to support.
+
+config PARIDE_ON26
+ tristate "OnSpec 90c26 protocol"
+ depends on PARIDE
+ help
+ This option enables support for the 90c26 parallel port IDE protocol
+ from OnSpec Electronics (often marketed under the ValuStore brand
+ name). If you chose to build PARIDE support into your kernel, you
+ may answer Y here to build in the protocol driver, otherwise you
+ should answer M to build it as a loadable module. The module will be
+ called on26. You must also have a high-level driver for the type
+ of device that you want to support.
+
+#