diff options
Diffstat (limited to 'drivers/bluetooth/btusb.c')
| -rw-r--r-- | drivers/bluetooth/btusb.c | 3429 |
1 files changed, 3429 insertions, 0 deletions
diff --git a/drivers/bluetooth/btusb.c b/drivers/bluetooth/btusb.c new file mode 100644 index 000000000..97acfaed8 --- /dev/null +++ b/drivers/bluetooth/btusb.c @@ -0,0 +1,3429 @@ +/* + * + * Generic Bluetooth USB driver + * + * Copyright (C) 2005-2008 Marcel Holtmann <marcel@holtmann.org> + * + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + * + */ + +#include <linux/module.h> +#include <linux/usb.h> +#include <linux/firmware.h> +#include <asm/unaligned.h> + +#include <net/bluetooth/bluetooth.h> +#include <net/bluetooth/hci_core.h> + +#include "btintel.h" +#include "btbcm.h" + +#define VERSION "0.8" + +static bool disable_scofix; +static bool force_scofix; + +static bool reset = 1; + +static struct usb_driver btusb_driver; + +#define BTUSB_IGNORE 0x01 +#define BTUSB_DIGIANSWER 0x02 +#define BTUSB_CSR 0x04 +#define BTUSB_SNIFFER 0x08 +#define BTUSB_BCM92035 0x10 +#define BTUSB_BROKEN_ISOC 0x20 +#define BTUSB_WRONG_SCO_MTU 0x40 +#define BTUSB_ATH3012 0x80 +#define BTUSB_INTEL 0x100 +#define BTUSB_INTEL_BOOT 0x200 +#define BTUSB_BCM_PATCHRAM 0x400 +#define BTUSB_MARVELL 0x800 +#define BTUSB_SWAVE 0x1000 +#define BTUSB_INTEL_NEW 0x2000 +#define BTUSB_AMP 0x4000 +#define BTUSB_QCA_ROME 0x8000 +#define BTUSB_BCM_APPLE 0x10000 +#define BTUSB_REALTEK 0x20000 + +static const struct usb_device_id btusb_table[] = { + /* Generic Bluetooth USB device */ + { USB_DEVICE_INFO(0xe0, 0x01, 0x01) }, + + /* Generic Bluetooth AMP device */ + { USB_DEVICE_INFO(0xe0, 0x01, 0x04), .driver_info = BTUSB_AMP }, + + /* Apple-specific (Broadcom) devices */ + { USB_VENDOR_AND_INTERFACE_INFO(0x05ac, 0xff, 0x01, 0x01), + .driver_info = BTUSB_BCM_APPLE }, + + /* MediaTek MT76x0E */ + { USB_DEVICE(0x0e8d, 0x763f) }, + + /* Broadcom SoftSailing reporting vendor specific */ + { USB_DEVICE(0x0a5c, 0x21e1) }, + + /* Apple MacBookPro 7,1 */ + { USB_DEVICE(0x05ac, 0x8213) }, + + /* Apple iMac11,1 */ + { USB_DEVICE(0x05ac, 0x8215) }, + + /* Apple MacBookPro6,2 */ + { USB_DEVICE(0x05ac, 0x8218) }, + + /* Apple MacBookAir3,1, MacBookAir3,2 */ + { USB_DEVICE(0x05ac, 0x821b) }, + + /* Apple MacBookAir4,1 */ + { USB_DEVICE(0x05ac, 0x821f) }, + + /* Apple MacBookPro8,2 */ + { USB_DEVICE(0x05ac, 0x821a) }, + + /* Apple MacMini5,1 */ + { USB_DEVICE(0x05ac, 0x8281) }, + + /* AVM BlueFRITZ! USB v2.0 */ + { USB_DEVICE(0x057c, 0x3800), .driver_info = BTUSB_SWAVE }, + + /* Bluetooth Ultraport Module from IBM */ + { USB_DEVICE(0x04bf, 0x030a) }, + + /* ALPS Modules with non-standard id */ + { USB_DEVICE(0x044e, 0x3001) }, + { USB_DEVICE(0x044e, 0x3002) }, + + /* Ericsson with non-standard id */ + { USB_DEVICE(0x0bdb, 0x1002) }, + + /* Canyon CN-BTU1 with HID interfaces */ + { USB_DEVICE(0x0c10, 0x0000) }, + + /* Broadcom BCM20702A0 */ + { USB_DEVICE(0x413c, 0x8197) }, + + /* Broadcom BCM20702B0 (Dynex/Insignia) */ + { USB_DEVICE(0x19ff, 0x0239), .driver_info = BTUSB_BCM_PATCHRAM }, + + /* Foxconn - Hon Hai */ + { USB_VENDOR_AND_INTERFACE_INFO(0x0489, 0xff, 0x01, 0x01), + .driver_info = BTUSB_BCM_PATCHRAM }, + + /* Lite-On Technology - Broadcom based */ + { USB_VENDOR_AND_INTERFACE_INFO(0x04ca, 0xff, 0x01, 0x01), + .driver_info = BTUSB_BCM_PATCHRAM }, + + /* Broadcom devices with vendor specific id */ + { USB_VENDOR_AND_INTERFACE_INFO(0x0a5c, 0xff, 0x01, 0x01), + .driver_info = BTUSB_BCM_PATCHRAM }, + + /* ASUSTek Computer - Broadcom based */ + { USB_VENDOR_AND_INTERFACE_INFO(0x0b05, 0xff, 0x01, 0x01), + .driver_info = BTUSB_BCM_PATCHRAM }, + + /* Belkin F8065bf - Broadcom based */ + { USB_VENDOR_AND_INTERFACE_INFO(0x050d, 0xff, 0x01, 0x01), + .driver_info = BTUSB_BCM_PATCHRAM }, + + /* IMC Networks - Broadcom based */ + { USB_VENDOR_AND_INTERFACE_INFO(0x13d3, 0xff, 0x01, 0x01), + .driver_info = BTUSB_BCM_PATCHRAM }, + + /* Intel Bluetooth USB Bootloader (RAM module) */ + { USB_DEVICE(0x8087, 0x0a5a), + .driver_info = BTUSB_INTEL_BOOT | BTUSB_BROKEN_ISOC }, + + { } /* Terminating entry */ +}; + +MODULE_DEVICE_TABLE(usb, btusb_table); + +static const struct usb_device_id blacklist_table[] = { + /* CSR BlueCore devices */ + { USB_DEVICE(0x0a12, 0x0001), .driver_info = BTUSB_CSR }, + + /* Broadcom BCM2033 without firmware */ + { USB_DEVICE(0x0a5c, 0x2033), .driver_info = BTUSB_IGNORE }, + + /* Atheros 3011 with sflash firmware */ + { USB_DEVICE(0x0489, 0xe027), .driver_info = BTUSB_IGNORE }, + { USB_DEVICE(0x0489, 0xe03d), .driver_info = BTUSB_IGNORE }, + { USB_DEVICE(0x04f2, 0xaff1), .driver_info = BTUSB_IGNORE }, + { USB_DEVICE(0x0930, 0x0215), .driver_info = BTUSB_IGNORE }, + { USB_DEVICE(0x0cf3, 0x3002), .driver_info = BTUSB_IGNORE }, + { USB_DEVICE(0x0cf3, 0xe019), .driver_info = BTUSB_IGNORE }, + { USB_DEVICE(0x13d3, 0x3304), .driver_info = BTUSB_IGNORE }, + + /* Atheros AR9285 Malbec with sflash firmware */ + { USB_DEVICE(0x03f0, 0x311d), .driver_info = BTUSB_IGNORE }, + + /* Atheros 3012 with sflash firmware */ + { USB_DEVICE(0x0489, 0xe04d), .driver_info = BTUSB_ATH3012 }, + { USB_DEVICE(0x0489, 0xe04e), .driver_info = BTUSB_ATH3012 }, + { USB_DEVICE(0x0489, 0xe056), .driver_info = BTUSB_ATH3012 }, + { USB_DEVICE(0x0489, 0xe057), .driver_info = BTUSB_ATH3012 }, + { USB_DEVICE(0x0489, 0xe05f), .driver_info = BTUSB_ATH3012 }, + { USB_DEVICE(0x0489, 0xe076), .driver_info = BTUSB_ATH3012 }, + { USB_DEVICE(0x0489, 0xe078), .driver_info = BTUSB_ATH3012 }, + { USB_DEVICE(0x04c5, 0x1330), .driver_info = BTUSB_ATH3012 }, + { USB_DEVICE(0x04ca, 0x3004), .driver_info = BTUSB_ATH3012 }, + { USB_DEVICE(0x04ca, 0x3005), .driver_info = BTUSB_ATH3012 }, + { USB_DEVICE(0x04ca, 0x3006), .driver_info = BTUSB_ATH3012 }, + { USB_DEVICE(0x04ca, 0x3007), .driver_info = BTUSB_ATH3012 }, + { USB_DEVICE(0x04ca, 0x3008), .driver_info = BTUSB_ATH3012 }, + { USB_DEVICE(0x04ca, 0x300b), .driver_info = BTUSB_ATH3012 }, + { USB_DEVICE(0x04ca, 0x300d), .driver_info = BTUSB_ATH3012 }, + { USB_DEVICE(0x04ca, 0x300f), .driver_info = BTUSB_ATH3012 }, + { USB_DEVICE(0x04ca, 0x3010), .driver_info = BTUSB_ATH3012 }, + { USB_DEVICE(0x0930, 0x0219), .driver_info = BTUSB_ATH3012 }, + { USB_DEVICE(0x0930, 0x0220), .driver_info = BTUSB_ATH3012 }, + { USB_DEVICE(0x0930, 0x0227), .driver_info = BTUSB_ATH3012 }, + { USB_DEVICE(0x0b05, 0x17d0), .driver_info = BTUSB_ATH3012 }, + { USB_DEVICE(0x0cf3, 0x0036), .driver_info = BTUSB_ATH3012 }, + { USB_DEVICE(0x0cf3, 0x3004), .driver_info = BTUSB_ATH3012 }, + { USB_DEVICE(0x0cf3, 0x3008), .driver_info = BTUSB_ATH3012 }, + { USB_DEVICE(0x0cf3, 0x311d), .driver_info = BTUSB_ATH3012 }, + { USB_DEVICE(0x0cf3, 0x311e), .driver_info = BTUSB_ATH3012 }, + { USB_DEVICE(0x0cf3, 0x311f), .driver_info = BTUSB_ATH3012 }, + { USB_DEVICE(0x0cf3, 0x3121), .driver_info = BTUSB_ATH3012 }, + { USB_DEVICE(0x0cf3, 0x817a), .driver_info = BTUSB_ATH3012 }, + { USB_DEVICE(0x0cf3, 0xe003), .driver_info = BTUSB_ATH3012 }, + { USB_DEVICE(0x0cf3, 0xe004), .driver_info = BTUSB_ATH3012 }, + { USB_DEVICE(0x0cf3, 0xe005), .driver_info = BTUSB_ATH3012 }, + { USB_DEVICE(0x0cf3, 0xe006), .driver_info = BTUSB_ATH3012 }, + { USB_DEVICE(0x13d3, 0x3362), .driver_info = BTUSB_ATH3012 }, + { USB_DEVICE(0x13d3, 0x3375), .driver_info = BTUSB_ATH3012 }, + { USB_DEVICE(0x13d3, 0x3393), .driver_info = BTUSB_ATH3012 }, + { USB_DEVICE(0x13d3, 0x3402), .driver_info = BTUSB_ATH3012 }, + { USB_DEVICE(0x13d3, 0x3408), .driver_info = BTUSB_ATH3012 }, + { USB_DEVICE(0x13d3, 0x3423), .driver_info = BTUSB_ATH3012 }, + { USB_DEVICE(0x13d3, 0x3432), .driver_info = BTUSB_ATH3012 }, + { USB_DEVICE(0x13d3, 0x3474), .driver_info = BTUSB_ATH3012 }, + + /* Atheros AR5BBU12 with sflash firmware */ + { USB_DEVICE(0x0489, 0xe02c), .driver_info = BTUSB_IGNORE }, + + /* Atheros AR5BBU12 with sflash firmware */ + { USB_DEVICE(0x0489, 0xe036), .driver_info = BTUSB_ATH3012 }, + { USB_DEVICE(0x0489, 0xe03c), .driver_info = BTUSB_ATH3012 }, + + /* QCA ROME chipset */ + { USB_DEVICE(0x0cf3, 0xe007), .driver_info = BTUSB_QCA_ROME }, + { USB_DEVICE(0x0cf3, 0xe300), .driver_info = BTUSB_QCA_ROME }, + { USB_DEVICE(0x0cf3, 0xe360), .driver_info = BTUSB_QCA_ROME }, + + /* Broadcom BCM2035 */ + { USB_DEVICE(0x0a5c, 0x2009), .driver_info = BTUSB_BCM92035 }, + { USB_DEVICE(0x0a5c, 0x200a), .driver_info = BTUSB_WRONG_SCO_MTU }, + { USB_DEVICE(0x0a5c, 0x2035), .driver_info = BTUSB_WRONG_SCO_MTU }, + + /* Broadcom BCM2045 */ + { USB_DEVICE(0x0a5c, 0x2039), .driver_info = BTUSB_WRONG_SCO_MTU }, + { USB_DEVICE(0x0a5c, 0x2101), .driver_info = BTUSB_WRONG_SCO_MTU }, + + /* IBM/Lenovo ThinkPad with Broadcom chip */ + { USB_DEVICE(0x0a5c, 0x201e), .driver_info = BTUSB_WRONG_SCO_MTU }, + { USB_DEVICE(0x0a5c, 0x2110), .driver_info = BTUSB_WRONG_SCO_MTU }, + + /* HP laptop with Broadcom chip */ + { USB_DEVICE(0x03f0, 0x171d), .driver_info = BTUSB_WRONG_SCO_MTU }, + + /* Dell laptop with Broadcom chip */ + { USB_DEVICE(0x413c, 0x8126), .driver_info = BTUSB_WRONG_SCO_MTU }, + + /* Dell Wireless 370 and 410 devices */ + { USB_DEVICE(0x413c, 0x8152), .driver_info = BTUSB_WRONG_SCO_MTU }, + { USB_DEVICE(0x413c, 0x8156), .driver_info = BTUSB_WRONG_SCO_MTU }, + + /* Belkin F8T012 and F8T013 devices */ + { USB_DEVICE(0x050d, 0x0012), .driver_info = BTUSB_WRONG_SCO_MTU }, + { USB_DEVICE(0x050d, 0x0013), .driver_info = BTUSB_WRONG_SCO_MTU }, + + /* Asus WL-BTD202 device */ + { USB_DEVICE(0x0b05, 0x1715), .driver_info = BTUSB_WRONG_SCO_MTU }, + + /* Kensington Bluetooth USB adapter */ + { USB_DEVICE(0x047d, 0x105e), .driver_info = BTUSB_WRONG_SCO_MTU }, + + /* RTX Telecom based adapters with buggy SCO support */ + { USB_DEVICE(0x0400, 0x0807), .driver_info = BTUSB_BROKEN_ISOC }, + { USB_DEVICE(0x0400, 0x080a), .driver_info = BTUSB_BROKEN_ISOC }, + + /* CONWISE Technology based adapters with buggy SCO support */ + { USB_DEVICE(0x0e5e, 0x6622), .driver_info = BTUSB_BROKEN_ISOC }, + + /* Roper Class 1 Bluetooth Dongle (Silicon Wave based) */ + { USB_DEVICE(0x1310, 0x0001), .driver_info = BTUSB_SWAVE }, + + /* Digianswer devices */ + { USB_DEVICE(0x08fd, 0x0001), .driver_info = BTUSB_DIGIANSWER }, + { USB_DEVICE(0x08fd, 0x0002), .driver_info = BTUSB_IGNORE }, + + /* CSR BlueCore Bluetooth Sniffer */ + { USB_DEVICE(0x0a12, 0x0002), + .driver_info = BTUSB_SNIFFER | BTUSB_BROKEN_ISOC }, + + /* Frontline ComProbe Bluetooth Sniffer */ + { USB_DEVICE(0x16d3, 0x0002), + .driver_info = BTUSB_SNIFFER | BTUSB_BROKEN_ISOC }, + + /* Marvell Bluetooth devices */ + { USB_DEVICE(0x1286, 0x2044), .driver_info = BTUSB_MARVELL }, + { USB_DEVICE(0x1286, 0x2046), .driver_info = BTUSB_MARVELL }, + + /* Intel Bluetooth devices */ + { USB_DEVICE(0x8087, 0x07da), .driver_info = BTUSB_CSR }, + { USB_DEVICE(0x8087, 0x07dc), .driver_info = BTUSB_INTEL }, + { USB_DEVICE(0x8087, 0x0a2a), .driver_info = BTUSB_INTEL }, + { USB_DEVICE(0x8087, 0x0a2b), .driver_info = BTUSB_INTEL_NEW }, + + /* Other Intel Bluetooth devices */ + { USB_VENDOR_AND_INTERFACE_INFO(0x8087, 0xe0, 0x01, 0x01), + .driver_info = BTUSB_IGNORE }, + + /* Realtek Bluetooth devices */ + { USB_VENDOR_AND_INTERFACE_INFO(0x0bda, 0xe0, 0x01, 0x01), + .driver_info = BTUSB_REALTEK }, + + /* Additional Realtek 8723AE Bluetooth devices */ + { USB_DEVICE(0x0930, 0x021d), .driver_info = BTUSB_REALTEK }, + { USB_DEVICE(0x13d3, 0x3394), .driver_info = BTUSB_REALTEK }, + + /* Additional Realtek 8723BE Bluetooth devices */ + { USB_DEVICE(0x0489, 0xe085), .driver_info = BTUSB_REALTEK }, + { USB_DEVICE(0x0489, 0xe08b), .driver_info = BTUSB_REALTEK }, + { USB_DEVICE(0x13d3, 0x3410), .driver_info = BTUSB_REALTEK }, + { USB_DEVICE(0x13d3, 0x3416), .driver_info = BTUSB_REALTEK }, + { USB_DEVICE(0x13d3, 0x3459), .driver_info = BTUSB_REALTEK }, + + /* Additional Realtek 8821AE Bluetooth devices */ + { USB_DEVICE(0x0b05, 0x17dc), .driver_info = BTUSB_REALTEK }, + { USB_DEVICE(0x13d3, 0x3414), .driver_info = BTUSB_REALTEK }, + { USB_DEVICE(0x13d3, 0x3458), .driver_info = BTUSB_REALTEK }, + { USB_DEVICE(0x13d3, 0x3461), .driver_info = BTUSB_REALTEK }, + { USB_DEVICE(0x13d3, 0x3462), .driver_info = BTUSB_REALTEK }, + + { } /* Terminating entry */ +}; + +#define BTUSB_MAX_ISOC_FRAMES 10 + +#define BTUSB_INTR_RUNNING 0 +#define BTUSB_BULK_RUNNING 1 +#define BTUSB_ISOC_RUNNING 2 +#define BTUSB_SUSPENDING 3 +#define BTUSB_DID_ISO_RESUME 4 +#define BTUSB_BOOTLOADER 5 +#define BTUSB_DOWNLOADING 6 +#define BTUSB_FIRMWARE_LOADED 7 +#define BTUSB_FIRMWARE_FAILED 8 +#define BTUSB_BOOTING 9 + +struct btusb_data { + struct hci_dev *hdev; + struct usb_device *udev; + struct usb_interface *intf; + struct usb_interface *isoc; + + unsigned long flags; + + struct work_struct work; + struct work_struct waker; + + struct usb_anchor deferred; + struct usb_anchor tx_anchor; + int tx_in_flight; + spinlock_t txlock; + + struct usb_anchor intr_anchor; + struct usb_anchor bulk_anchor; + struct usb_anchor isoc_anchor; + spinlock_t rxlock; + + struct sk_buff *evt_skb; + struct sk_buff *acl_skb; + struct sk_buff *sco_skb; + + struct usb_endpoint_descriptor *intr_ep; + struct usb_endpoint_descriptor *bulk_tx_ep; + struct usb_endpoint_descriptor *bulk_rx_ep; + struct usb_endpoint_descriptor *isoc_tx_ep; + struct usb_endpoint_descriptor *isoc_rx_ep; + + __u8 cmdreq_type; + __u8 cmdreq; + + unsigned int sco_num; + int isoc_altsetting; + int suspend_count; + + int (*recv_event)(struct hci_dev *hdev, struct sk_buff *skb); + int (*recv_bulk)(struct btusb_data *data, void *buffer, int count); + + int (*setup_on_usb)(struct hci_dev *hdev); +}; + +static inline void btusb_free_frags(struct btusb_data *data) +{ + unsigned long flags; + + spin_lock_irqsave(&data->rxlock, flags); + + kfree_skb(data->evt_skb); + data->evt_skb = NULL; + + kfree_skb(data->acl_skb); + data->acl_skb = NULL; + + kfree_skb(data->sco_skb); + data->sco_skb = NULL; + + spin_unlock_irqrestore(&data->rxlock, flags); +} + +static int btusb_recv_intr(struct btusb_data *data, void *buffer, int count) +{ + struct sk_buff *skb; + int err = 0; + + spin_lock(&data->rxlock); + skb = data->evt_skb; + + while (count) { + int len; + + if (!skb) { + skb = bt_skb_alloc(HCI_MAX_EVENT_SIZE, GFP_ATOMIC); + if (!skb) { + err = -ENOMEM; + break; + } + + bt_cb(skb)->pkt_type = HCI_EVENT_PKT; + bt_cb(skb)->expect = HCI_EVENT_HDR_SIZE; + } + + len = min_t(uint, bt_cb(skb)->expect, count); + memcpy(skb_put(skb, len), buffer, len); + + count -= len; + buffer += len; + bt_cb(skb)->expect -= len; + + if (skb->len == HCI_EVENT_HDR_SIZE) { + /* Complete event header */ + bt_cb(skb)->expect = hci_event_hdr(skb)->plen; + + if (skb_tailroom(skb) < bt_cb(skb)->expect) { + kfree_skb(skb); + skb = NULL; + + err = -EILSEQ; + break; + } + } + + if (bt_cb(skb)->expect == 0) { + /* Complete frame */ + data->recv_event(data->hdev, skb); + skb = NULL; + } + } + + data->evt_skb = skb; + spin_unlock(&data->rxlock); + + return err; +} + +static int btusb_recv_bulk(struct btusb_data *data, void *buffer, int count) +{ + struct sk_buff *skb; + int err = 0; + + spin_lock(&data->rxlock); + skb = data->acl_skb; + + while (count) { + int len; + + if (!skb) { + skb = bt_skb_alloc(HCI_MAX_FRAME_SIZE, GFP_ATOMIC); + if (!skb) { + err = -ENOMEM; + break; + } + + bt_cb(skb)->pkt_type = HCI_ACLDATA_PKT; + bt_cb(skb)->expect = HCI_ACL_HDR_SIZE; + } + + len = min_t(uint, bt_cb(skb)->expect, count); + memcpy(skb_put(skb, len), buffer, len); + + count -= len; + buffer += len; + bt_cb(skb)->expect -= len; + + if (skb->len == HCI_ACL_HDR_SIZE) { + __le16 dlen = hci_acl_hdr(skb)->dlen; + + /* Complete ACL header */ + bt_cb(skb)->expect = __le16_to_cpu(dlen); + + if (skb_tailroom(skb) < bt_cb(skb)->expect) { + kfree_skb(skb); + skb = NULL; + + err = -EILSEQ; + break; + } + } + + if (bt_cb(skb)->expect == 0) { + /* Complete frame */ + hci_recv_frame(data->hdev, skb); + skb = NULL; + } + } + + data->acl_skb = skb; + spin_unlock(&data->rxlock); + + return err; +} + +static int btusb_recv_isoc(struct btusb_data *data, void *buffer, int count) +{ + struct sk_buff *skb; + int err = 0; + + spin_lock(&data->rxlock); + skb = data->sco_skb; + + while (count) { + int len; + + if (!skb) { + skb = bt_skb_alloc(HCI_MAX_SCO_SIZE, GFP_ATOMIC); + if (!skb) { + err = -ENOMEM; + break; + } + + bt_cb(skb)->pkt_type = HCI_SCODATA_PKT; + bt_cb(skb)->expect = HCI_SCO_HDR_SIZE; + } + + len = min_t(uint, bt_cb(skb)->expect, count); + memcpy(skb_put(skb, len), buffer, len); + + count -= len; + buffer += len; + bt_cb(skb)->expect -= len; + + if (skb->len == HCI_SCO_HDR_SIZE) { + /* Complete SCO header */ + bt_cb(skb)->expect = hci_sco_hdr(skb)->dlen; + + if (skb_tailroom(skb) < bt_cb(skb)->expect) { + kfree_skb(skb); + skb = NULL; + + err = -EILSEQ; + break; + } + } + + if (bt_cb(skb)->expect == 0) { + /* Complete frame */ + hci_recv_frame(data->hdev, skb); + skb = NULL; + } + } + + data->sco_skb = skb; + spin_unlock(&data->rxlock); + + return err; +} + +static void btusb_intr_complete(struct urb *urb) +{ + struct hci_dev *hdev = urb->context; + struct btusb_data *data = hci_get_drvdata(hdev); + int err; + + BT_DBG("%s urb %p status %d count %d", hdev->name, urb, urb->status, + urb->actual_length); + + if (!test_bit(HCI_RUNNING, &hdev->flags)) + return; + + if (urb->status == 0) { + hdev->stat.byte_rx += urb->actual_length; + + if (btusb_recv_intr(data, urb->transfer_buffer, + urb->actual_length) < 0) { + BT_ERR("%s corrupted event packet", hdev->name); + hdev->stat.err_rx++; + } + } else if (urb->status == -ENOENT) { + /* Avoid suspend failed when usb_kill_urb */ + return; + } + + if (!test_bit(BTUSB_INTR_RUNNING, &data->flags)) + return; + + usb_mark_last_busy(data->udev); + usb_anchor_urb(urb, &data->intr_anchor); + + err = usb_submit_urb(urb, GFP_ATOMIC); + if (err < 0) { + /* -EPERM: urb is being killed; + * -ENODEV: device got disconnected */ + if (err != -EPERM && err != -ENODEV) + BT_ERR("%s urb %p failed to resubmit (%d)", + hdev->name, urb, -err); + usb_unanchor_urb(urb); + } +} + +static int btusb_submit_intr_urb(struct hci_dev *hdev, gfp_t mem_flags) +{ + struct btusb_data *data = hci_get_drvdata(hdev); + struct urb *urb; + unsigned char *buf; + unsigned int pipe; + int err, size; + + BT_DBG("%s", hdev->name); + + if (!data->intr_ep) + return -ENODEV; + + urb = usb_alloc_urb(0, mem_flags); + if (!urb) + return -ENOMEM; + + size = le16_to_cpu(data->intr_ep->wMaxPacketSize); + + buf = kmalloc(size, mem_flags); + if (!buf) { + usb_free_urb(urb); + return -ENOMEM; + } + + pipe = usb_rcvintpipe(data->udev, data->intr_ep->bEndpointAddress); + + usb_fill_int_urb(urb, data->udev, pipe, buf, size, + btusb_intr_complete, hdev, data->intr_ep->bInterval); + + urb->transfer_flags |= URB_FREE_BUFFER; + + usb_anchor_urb(urb, &data->intr_anchor); + + err = usb_submit_urb(urb, mem_flags); + if (err < 0) { + if (err != -EPERM && err != -ENODEV) + BT_ERR("%s urb %p submission failed (%d)", + hdev->name, urb, -err); + usb_unanchor_urb(urb); + } + + usb_free_urb(urb); + + return err; +} + +static void btusb_bulk_complete(struct urb *urb) +{ + struct hci_dev *hdev = urb->context; + struct btusb_data *data = hci_get_drvdata(hdev); + int err; + + BT_DBG("%s urb %p status %d count %d", hdev->name, urb, urb->status, + urb->actual_length); + + if (!test_bit(HCI_RUNNING, &hdev->flags)) + return; + + if (urb->status == 0) { + hdev->stat.byte_rx += urb->actual_length; + + if (data->recv_bulk(data, urb->transfer_buffer, + urb->actual_length) < 0) { + BT_ERR("%s corrupted ACL packet", hdev->name); + hdev->stat.err_rx++; + } + } else if (urb->status == -ENOENT) { + /* Avoid suspend failed when usb_kill_urb */ + return; + } + + if (!test_bit(BTUSB_BULK_RUNNING, &data->flags)) + return; + + usb_anchor_urb(urb, &data->bulk_anchor); + usb_mark_last_busy(data->udev); + + err = usb_submit_urb(urb, GFP_ATOMIC); + if (err < 0) { + /* -EPERM: urb is being killed; + * -ENODEV: device got disconnected */ + if (err != -EPERM && err != -ENODEV) + BT_ERR("%s urb %p failed to resubmit (%d)", + hdev->name, urb, -err); + usb_unanchor_urb(urb); + } +} + +static int btusb_submit_bulk_urb(struct hci_dev *hdev, gfp_t mem_flags) +{ + struct btusb_data *data = hci_get_drvdata(hdev); + struct urb *urb; + unsigned char *buf; + unsigned int pipe; + int err, size = HCI_MAX_FRAME_SIZE; + + BT_DBG("%s", hdev->name); + + if (!data->bulk_rx_ep) + return -ENODEV; + + urb = usb_alloc_urb(0, mem_flags); + if (!urb) + return -ENOMEM; + + buf = kmalloc(size, mem_flags); + if (!buf) { + usb_free_urb(urb); + return -ENOMEM; + } + + pipe = usb_rcvbulkpipe(data->udev, data->bulk_rx_ep->bEndpointAddress); + + usb_fill_bulk_urb(urb, data->udev, pipe, buf, size, + btusb_bulk_complete, hdev); + + urb->transfer_flags |= URB_FREE_BUFFER; + + usb_mark_last_busy(data->udev); + usb_anchor_urb(urb, &data->bulk_anchor); + + err = usb_submit_urb(urb, mem_flags); + if (err < 0) { + if (err != -EPERM && err != -ENODEV) + BT_ERR("%s urb %p submission failed (%d)", + hdev->name, urb, -err); + usb_unanchor_urb(urb); + } + + usb_free_urb(urb); + + return err; +} + +static void btusb_isoc_complete(struct urb *urb) +{ + struct hci_dev *hdev = urb->context; + struct btusb_data *data = hci_get_drvdata(hdev); + int i, err; + + BT_DBG("%s urb %p status %d count %d", hdev->name, urb, urb->status, + urb->actual_length); + + if (!test_bit(HCI_RUNNING, &hdev->flags)) + return; + + if (urb->status == 0) { + for (i = 0; i < urb->number_of_packets; i++) { + unsigned int offset = urb->iso_frame_desc[i].offset; + unsigned int length = urb->iso_frame_desc[i].actual_length; + + if (urb->iso_frame_desc[i].status) + continue; + + hdev->stat.byte_rx += length; + + if (btusb_recv_isoc(data, urb->transfer_buffer + offset, + length) < 0) { + BT_ERR("%s corrupted SCO packet", hdev->name); + hdev->stat.err_rx++; + } + } + } else if (urb->status == -ENOENT) { + /* Avoid suspend failed when usb_kill_urb */ + return; + } + + if (!test_bit(BTUSB_ISOC_RUNNING, &data->flags)) + return; + + usb_anchor_urb(urb, &data->isoc_anchor); + + err = usb_submit_urb(urb, GFP_ATOMIC); + if (err < 0) { + /* -EPERM: urb is being killed; + * -ENODEV: device got disconnected */ + if (err != -EPERM && err != -ENODEV) + BT_ERR("%s urb %p failed to resubmit (%d)", + hdev->name, urb, -err); + usb_unanchor_urb(urb); + } +} + +static inline void __fill_isoc_descriptor(struct urb *urb, int len, int mtu) +{ + int i, offset = 0; + + BT_DBG("len %d mtu %d", len, mtu); + + for (i = 0; i < BTUSB_MAX_ISOC_FRAMES && len >= mtu; + i++, offset += mtu, len -= mtu) { + urb->iso_frame_desc[i].offset = offset; + urb->iso_frame_desc[i].length = mtu; + } + + if (len && i < BTUSB_MAX_ISOC_FRAMES) { + urb->iso_frame_desc[i].offset = offset; + urb->iso_frame_desc[i].length = len; + i++; + } + + urb->number_of_packets = i; +} + +static int btusb_submit_isoc_urb(struct hci_dev *hdev, gfp_t mem_flags) +{ + struct btusb_data *data = hci_get_drvdata(hdev); + struct urb *urb; + unsigned char *buf; + unsigned int pipe; + int err, size; + + BT_DBG("%s", hdev->name); + + if (!data->isoc_rx_ep) + return -ENODEV; + + urb = usb_alloc_urb(BTUSB_MAX_ISOC_FRAMES, mem_flags); + if (!urb) + return -ENOMEM; + + size = le16_to_cpu(data->isoc_rx_ep->wMaxPacketSize) * + BTUSB_MAX_ISOC_FRAMES; + + buf = kmalloc(size, mem_flags); + if (!buf) { + usb_free_urb(urb); + return -ENOMEM; + } + + pipe = usb_rcvisocpipe(data->udev, data->isoc_rx_ep->bEndpointAddress); + + usb_fill_int_urb(urb, data->udev, pipe, buf, size, btusb_isoc_complete, + hdev, data->isoc_rx_ep->bInterval); + + urb->transfer_flags = URB_FREE_BUFFER | URB_ISO_ASAP; + + __fill_isoc_descriptor(urb, size, + le16_to_cpu(data->isoc_rx_ep->wMaxPacketSize)); + + usb_anchor_urb(urb, &data->isoc_anchor); + + err = usb_submit_urb(urb, mem_flags); + if (err < 0) { + if (err != -EPERM && err != -ENODEV) + BT_ERR("%s urb %p submission failed (%d)", + hdev->name, urb, -err); + usb_unanchor_urb(urb); + } + + usb_free_urb(urb); + + return err; +} + +static void btusb_tx_complete(struct urb *urb) +{ + struct sk_buff *skb = urb->context; + struct hci_dev *hdev = (struct hci_dev *)skb->dev; + struct btusb_data *data = hci_get_drvdata(hdev); + + BT_DBG("%s urb %p status %d count %d", hdev->name, urb, urb->status, + urb->actual_length); + + if (!test_bit(HCI_RUNNING, &hdev->flags)) + goto done; + + if (!urb->status) + hdev->stat.byte_tx += urb->transfer_buffer_length; + else + hdev->stat.err_tx++; + +done: + spin_lock(&data->txlock); + data->tx_in_flight--; + spin_unlock(&data->txlock); + + kfree(urb->setup_packet); + + kfree_skb(skb); +} + +static void btusb_isoc_tx_complete(struct urb *urb) +{ + struct sk_buff *skb = urb->context; + struct hci_dev *hdev = (struct hci_dev *)skb->dev; + + BT_DBG("%s urb %p status %d count %d", hdev->name, urb, urb->status, + urb->actual_length); + + if (!test_bit(HCI_RUNNING, &hdev->flags)) + goto done; + + if (!urb->status) + hdev->stat.byte_tx += urb->transfer_buffer_length; + else + hdev->stat.err_tx++; + +done: + kfree(urb->setup_packet); + + kfree_skb(skb); +} + +static int btusb_open(struct hci_dev *hdev) +{ + struct btusb_data *data = hci_get_drvdata(hdev); + int err; + + BT_DBG("%s", hdev->name); + + /* Patching USB firmware files prior to starting any URBs of HCI path + * It is more safe to use USB bulk channel for downloading USB patch + */ + if (data->setup_on_usb) { + err = data->setup_on_usb(hdev); + if (err < 0) + return err; + } + + err = usb_autopm_get_interface(data->intf); + if (err < 0) + return err; + + data->intf->needs_remote_wakeup = 1; + + if (test_and_set_bit(HCI_RUNNING, &hdev->flags)) + goto done; + + if (test_and_set_bit(BTUSB_INTR_RUNNING, &data->flags)) + goto done; + + err = btusb_submit_intr_urb(hdev, GFP_KERNEL); + if (err < 0) + goto failed; + + err = btusb_submit_bulk_urb(hdev, GFP_KERNEL); + if (err < 0) { + usb_kill_anchored_urbs(&data->intr_anchor); + goto failed; + } + + set_bit(BTUSB_BULK_RUNNING, &data->flags); + btusb_submit_bulk_urb(hdev, GFP_KERNEL); + +done: + usb_autopm_put_interface(data->intf); + return 0; + +failed: + clear_bit(BTUSB_INTR_RUNNING, &data->flags); + clear_bit(HCI_RUNNING, &hdev->flags); + usb_autopm_put_interface(data->intf); + return err; +} + +static void btusb_stop_traffic(struct btusb_data *data) +{ + usb_kill_anchored_urbs(&data->intr_anchor); + usb_kill_anchored_urbs(&data->bulk_anchor); + usb_kill_anchored_urbs(&data->isoc_anchor); +} + +static int btusb_close(struct hci_dev *hdev) +{ + struct btusb_data *data = hci_get_drvdata(hdev); + int err; + + BT_DBG("%s", hdev->name); + + if (!test_and_clear_bit(HCI_RUNNING, &hdev->flags)) + return 0; + + cancel_work_sync(&data->work); + cancel_work_sync(&data->waker); + + clear_bit(BTUSB_ISOC_RUNNING, &data->flags); + clear_bit(BTUSB_BULK_RUNNING, &data->flags); + clear_bit(BTUSB_INTR_RUNNING, &data->flags); + + btusb_stop_traffic(data); + btusb_free_frags(data); + + err = usb_autopm_get_interface(data->intf); + if (err < 0) + goto failed; + + data->intf->needs_remote_wakeup = 0; + usb_autopm_put_interface(data->intf); + +failed: + usb_scuttle_anchored_urbs(&data->deferred); + return 0; +} + +static int btusb_flush(struct hci_dev *hdev) +{ + struct btusb_data *data = hci_get_drvdata(hdev); + + BT_DBG("%s", hdev->name); + + usb_kill_anchored_urbs(&data->tx_anchor); + btusb_free_frags(data); + + return 0; +} + +static struct urb *alloc_ctrl_urb(struct hci_dev *hdev, struct sk_buff *skb) +{ + struct btusb_data *data = hci_get_drvdata(hdev); + struct usb_ctrlrequest *dr; + struct urb *urb; + unsigned int pipe; + + urb = usb_alloc_urb(0, GFP_KERNEL); + if (!urb) + return ERR_PTR(-ENOMEM); + + dr = kmalloc(sizeof(*dr), GFP_KERNEL); + if (!dr) { + usb_free_urb(urb); + return ERR_PTR(-ENOMEM); + } + + dr->bRequestType = data->cmdreq_type; + dr->bRequest = data->cmdreq; + dr->wIndex = 0; + dr->wValue = 0; + dr->wLength = __cpu_to_le16(skb->len); + + pipe = usb_sndctrlpipe(data->udev, 0x00); + + usb_fill_control_urb(urb, data->udev, pipe, (void *)dr, + skb->data, skb->len, btusb_tx_complete, skb); + + skb->dev = (void *)hdev; + + return urb; +} + +static struct urb *alloc_bulk_urb(struct hci_dev *hdev, struct sk_buff *skb) +{ + struct btusb_data *data = hci_get_drvdata(hdev); + struct urb *urb; + unsigned int pipe; + + if (!data->bulk_tx_ep) + return ERR_PTR(-ENODEV); + + urb = usb_alloc_urb(0, GFP_KERNEL); + if (!urb) + return ERR_PTR(-ENOMEM); + + pipe = usb_sndbulkpipe(data->udev, data->bulk_tx_ep->bEndpointAddress); + + usb_fill_bulk_urb(urb, data->udev, pipe, + skb->data, skb->len, btusb_tx_complete, skb); + + skb->dev = (void *)hdev; + + return urb; +} + +static struct urb *alloc_isoc_urb(struct hci_dev *hdev, struct sk_buff *skb) +{ + struct btusb_data *data = hci_get_drvdata(hdev); + struct urb *urb; + unsigned int pipe; + + if (!data->isoc_tx_ep) + return ERR_PTR(-ENODEV); + + urb = usb_alloc_urb(BTUSB_MAX_ISOC_FRAMES, GFP_KERNEL); + if (!urb) + return ERR_PTR(-ENOMEM); + + pipe = usb_sndisocpipe(data->udev, data->isoc_tx_ep->bEndpointAddress); + + usb_fill_int_urb(urb, data->udev, pipe, + skb->data, skb->len, btusb_isoc_tx_complete, + skb, data->isoc_tx_ep->bInterval); + + urb->transfer_flags = URB_ISO_ASAP; + + __fill_isoc_descriptor(urb, skb->len, + le16_to_cpu(data->isoc_tx_ep->wMaxPacketSize)); + + skb->dev = (void *)hdev; + + return urb; +} + +static int submit_tx_urb(struct hci_dev *hdev, struct urb *urb) +{ + struct btusb_data *data = hci_get_drvdata(hdev); + int err; + + usb_anchor_urb(urb, &data->tx_anchor); + + err = usb_submit_urb(urb, GFP_KERNEL); + if (err < 0) { + if (err != -EPERM && err != -ENODEV) + BT_ERR("%s urb %p submission failed (%d)", + hdev->name, urb, -err); + kfree(urb->setup_packet); + usb_unanchor_urb(urb); + } else { + usb_mark_last_busy(data->udev); + } + + usb_free_urb(urb); + return err; +} + +static int submit_or_queue_tx_urb(struct hci_dev *hdev, struct urb *urb) +{ + struct btusb_data *data = hci_get_drvdata(hdev); + unsigned long flags; + bool suspending; + + spin_lock_irqsave(&data->txlock, flags); + suspending = test_bit(BTUSB_SUSPENDING, &data->flags); + if (!suspending) + data->tx_in_flight++; + spin_unlock_irqrestore(&data->txlock, flags); + + if (!suspending) + return submit_tx_urb(hdev, urb); + + usb_anchor_urb(urb, &data->deferred); + schedule_work(&data->waker); + + usb_free_urb(urb); + return 0; +} + +static int btusb_send_frame(struct hci_dev *hdev, struct sk_buff *skb) +{ + struct urb *urb; + + BT_DBG("%s", hdev->name); + + if (!test_bit(HCI_RUNNING, &hdev->flags)) + return -EBUSY; + + switch (bt_cb(skb)->pkt_type) { + case HCI_COMMAND_PKT: + urb = alloc_ctrl_urb(hdev, skb); + if (IS_ERR(urb)) + return PTR_ERR(urb); + + hdev->stat.cmd_tx++; + return submit_or_queue_tx_urb(hdev, urb); + + case HCI_ACLDATA_PKT: + urb = alloc_bulk_urb(hdev, skb); + if (IS_ERR(urb)) + return PTR_ERR(urb); + + hdev->stat.acl_tx++; + return submit_or_queue_tx_urb(hdev, urb); + + case HCI_SCODATA_PKT: + if (hci_conn_num(hdev, SCO_LINK) < 1) + return -ENODEV; + + urb = alloc_isoc_urb(hdev, skb); + if (IS_ERR(urb)) + return PTR_ERR(urb); + + hdev->stat.sco_tx++; + return submit_tx_urb(hdev, urb); + } + + return -EILSEQ; +} + +static void btusb_notify(struct hci_dev *hdev, unsigned int evt) +{ + struct btusb_data *data = hci_get_drvdata(hdev); + + BT_DBG("%s evt %d", hdev->name, evt); + + if (hci_conn_num(hdev, SCO_LINK) != data->sco_num) { + data->sco_num = hci_conn_num(hdev, SCO_LINK); + schedule_work(&data->work); + } +} + +static inline int __set_isoc_interface(struct hci_dev *hdev, int altsetting) +{ + struct btusb_data *data = hci_get_drvdata(hdev); + struct usb_interface *intf = data->isoc; + struct usb_endpoint_descriptor *ep_desc; + int i, err; + + if (!data->isoc) + return -ENODEV; + + err = usb_set_interface(data->udev, 1, altsetting); + if (err < 0) { + BT_ERR("%s setting interface failed (%d)", hdev->name, -err); + return err; + } + + data->isoc_altsetting = altsetting; + + data->isoc_tx_ep = NULL; + data->isoc_rx_ep = NULL; + + for (i = 0; i < intf->cur_altsetting->desc.bNumEndpoints; i++) { + ep_desc = &intf->cur_altsetting->endpoint[i].desc; + + if (!data->isoc_tx_ep && usb_endpoint_is_isoc_out(ep_desc)) { + data->isoc_tx_ep = ep_desc; + continue; + } + + if (!data->isoc_rx_ep && usb_endpoint_is_isoc_in(ep_desc)) { + data->isoc_rx_ep = ep_desc; + continue; + } + } + + if (!data->isoc_tx_ep || !data->isoc_rx_ep) { + BT_ERR("%s invalid SCO descriptors", hdev->name); + return -ENODEV; + } + + return 0; +} + +static void btusb_work(struct work_struct *work) +{ + struct btusb_data *data = container_of(work, struct btusb_data, work); + struct hci_dev *hdev = data->hdev; + int new_alts; + int err; + + if (data->sco_num > 0) { + if (!test_bit(BTUSB_DID_ISO_RESUME, &data->flags)) { + err = usb_autopm_get_interface(data->isoc ? data->isoc : data->intf); + if (err < 0) { + clear_bit(BTUSB_ISOC_RUNNING, &data->flags); + usb_kill_anchored_urbs(&data->isoc_anchor); + return; + } + + set_bit(BTUSB_DID_ISO_RESUME, &data->flags); + } + + if (hdev->voice_setting & 0x0020) { + static const int alts[3] = { 2, 4, 5 }; + + new_alts = alts[data->sco_num - 1]; + } else { + new_alts = data->sco_num; + } + + if (data->isoc_altsetting != new_alts) { + clear_bit(BTUSB_ISOC_RUNNING, &data->flags); + usb_kill_anchored_urbs(&data->isoc_anchor); + + if (__set_isoc_interface(hdev, new_alts) < 0) + return; + } + + if (!test_and_set_bit(BTUSB_ISOC_RUNNING, &data->flags)) { + if (btusb_submit_isoc_urb(hdev, GFP_KERNEL) < 0) + clear_bit(BTUSB_ISOC_RUNNING, &data->flags); + else + btusb_submit_isoc_urb(hdev, GFP_KERNEL); + } + } else { + clear_bit(BTUSB_ISOC_RUNNING, &data->flags); + usb_kill_anchored_urbs(&data->isoc_anchor); + + __set_isoc_interface(hdev, 0); + if (test_and_clear_bit(BTUSB_DID_ISO_RESUME, &data->flags)) + usb_autopm_put_interface(data->isoc ? data->isoc : data->intf); + } +} + +static void btusb_waker(struct work_struct *work) +{ + struct btusb_data *data = container_of(work, struct btusb_data, waker); + int err; + + err = usb_autopm_get_interface(data->intf); + if (err < 0) + return; + + usb_autopm_put_interface(data->intf); +} + +static struct sk_buff *btusb_read_local_version(struct hci_dev *hdev) +{ + struct sk_buff *skb; + + skb = __hci_cmd_sync(hdev, HCI_OP_READ_LOCAL_VERSION, 0, NULL, + HCI_INIT_TIMEOUT); + if (IS_ERR(skb)) { + BT_ERR("%s: HCI_OP_READ_LOCAL_VERSION failed (%ld)", + hdev->name, PTR_ERR(skb)); + return skb; + } + + if (skb->len != sizeof(struct hci_rp_read_local_version)) { + BT_ERR("%s: HCI_OP_READ_LOCAL_VERSION event length mismatch", + hdev->name); + kfree_skb(skb); + return ERR_PTR(-EIO); + } + + return skb; +} + +static int btusb_setup_bcm92035(struct hci_dev *hdev) +{ + struct sk_buff *skb; + u8 val = 0x00; + + BT_DBG("%s", hdev->name); + + skb = __hci_cmd_sync(hdev, 0xfc3b, 1, &val, HCI_INIT_TIMEOUT); + if (IS_ERR(skb)) + BT_ERR("BCM92035 command failed (%ld)", -PTR_ERR(skb)); + else + kfree_skb(skb); + + return 0; +} + +static int btusb_setup_csr(struct hci_dev *hdev) +{ + struct hci_rp_read_local_version *rp; + struct sk_buff *skb; + int ret; + + BT_DBG("%s", hdev->name); + + skb = btusb_read_local_version(hdev); + if (IS_ERR(skb)) + return -PTR_ERR(skb); + + rp = (struct hci_rp_read_local_version *)skb->data; + + if (!rp->status) { + if (le16_to_cpu(rp->manufacturer) != 10) { + /* Clear the reset quirk since this is not an actual + * early Bluetooth 1.1 device from CSR. + */ + clear_bit(HCI_QUIRK_RESET_ON_CLOSE, &hdev->quirks); + + /* These fake CSR controllers have all a broken + * stored link key handling and so just disable it. + */ + set_bit(HCI_QUIRK_BROKEN_STORED_LINK_KEY, + &hdev->quirks); + } + } + + ret = -bt_to_errno(rp->status); + + kfree_skb(skb); + + return ret; +} + +#define RTL_FRAG_LEN 252 + +struct rtl_download_cmd { + __u8 index; + __u8 data[RTL_FRAG_LEN]; +} __packed; + +struct rtl_download_response { + __u8 status; + __u8 index; +} __packed; + +struct rtl_rom_version_evt { + __u8 status; + __u8 version; +} __packed; + +struct rtl_epatch_header { + __u8 signature[8]; + __le32 fw_version; + __le16 num_patches; +} __packed; + +#define RTL_EPATCH_SIGNATURE "Realtech" +#define RTL_ROM_LMP_3499 0x3499 +#define RTL_ROM_LMP_8723A 0x1200 +#define RTL_ROM_LMP_8723B 0x8723 +#define RTL_ROM_LMP_8821A 0x8821 +#define RTL_ROM_LMP_8761A 0x8761 + +static int rtl_read_rom_version(struct hci_dev *hdev, u8 *version) +{ + struct rtl_rom_version_evt *rom_version; + struct sk_buff *skb; + int ret; + + /* Read RTL ROM version command */ + skb = __hci_cmd_sync(hdev, 0xfc6d, 0, NULL, HCI_INIT_TIMEOUT); + if (IS_ERR(skb)) { + BT_ERR("%s: Read ROM version failed (%ld)", + hdev->name, PTR_ERR(skb)); + return PTR_ERR(skb); + } + + if (skb->len != sizeof(*rom_version)) { + BT_ERR("%s: RTL version event length mismatch", hdev->name); + kfree_skb(skb); + return -EIO; + } + + rom_version = (struct rtl_rom_version_evt *)skb->data; + BT_INFO("%s: rom_version status=%x version=%x", + hdev->name, rom_version->status, rom_version->version); + + ret = rom_version->status; + if (ret == 0) + *version = rom_version->version; + + kfree_skb(skb); + return ret; +} + +static int rtl8723b_parse_firmware(struct hci_dev *hdev, u16 lmp_subver, + const struct firmware *fw, + unsigned char **_buf) +{ + const u8 extension_sig[] = { 0x51, 0x04, 0xfd, 0x77 }; + struct rtl_epatch_header *epatch_info; + unsigned char *buf; + int i, ret, len; + size_t min_size; + u8 opcode, length, data, rom_version = 0; + int project_id = -1; + const unsigned char *fwptr, *chip_id_base; + const unsigned char *patch_length_base, *patch_offset_base; + u32 patch_offset = 0; + u16 patch_length, num_patches; + const u16 project_id_to_lmp_subver[] = { + RTL_ROM_LMP_8723A, + RTL_ROM_LMP_8723B, + RTL_ROM_LMP_8821A, + RTL_ROM_LMP_8761A + }; + + ret = rtl_read_rom_version(hdev, &rom_version); + if (ret) + return -bt_to_errno(ret); + + min_size = sizeof(struct rtl_epatch_header) + sizeof(extension_sig) + 3; + if (fw->size < min_size) + return -EINVAL; + + fwptr = fw->data + fw->size - sizeof(extension_sig); + if (memcmp(fwptr, extension_sig, sizeof(extension_sig)) != 0) { + BT_ERR("%s: extension section signature mismatch", hdev->name); + return -EINVAL; + } + + /* Loop from the end of the firmware parsing instructions, until + * we find an instruction that identifies the "project ID" for the + * hardware supported by this firwmare file. + * Once we have that, we double-check that that project_id is suitable + * for the hardware we are working with. + */ + while (fwptr >= fw->data + (sizeof(struct rtl_epatch_header) + 3)) { + opcode = *--fwptr; + length = *--fwptr; + data = *--fwptr; + + BT_DBG("check op=%x len=%x data=%x", opcode, length, data); + + if (opcode == 0xff) /* EOF */ + break; + + if (length == 0) { + BT_ERR("%s: found instruction with length 0", + hdev->name); + return -EINVAL; + } + + if (opcode == 0 && length == 1) { + project_id = data; + break; + } + + fwptr -= length; + } + + if (project_id < 0) { + BT_ERR("%s: failed to find version instruction", hdev->name); + return -EINVAL; + } + + if (project_id >= ARRAY_SIZE(project_id_to_lmp_subver)) { + BT_ERR("%s: unknown project id %d", hdev->name, project_id); + return -EINVAL; + } + + if (lmp_subver != project_id_to_lmp_subver[project_id]) { + BT_ERR("%s: firmware is for %x but this is a %x", hdev->name, + project_id_to_lmp_subver[project_id], lmp_subver); + return -EINVAL; + } + + epatch_info = (struct rtl_epatch_header *)fw->data; + if (memcmp(epatch_info->signature, RTL_EPATCH_SIGNATURE, 8) != 0) { + BT_ERR("%s: bad EPATCH signature", hdev->name); + return -EINVAL; + } + + num_patches = le16_to_cpu(epatch_info->num_patches); + BT_DBG("fw_version=%x, num_patches=%d", + le32_to_cpu(epatch_info->fw_version), num_patches); + + /* After the rtl_epatch_header there is a funky patch metadata section. + * Assuming 2 patches, the layout is: + * ChipID1 ChipID2 PatchLength1 PatchLength2 PatchOffset1 PatchOffset2 + * + * Find the right patch for this chip. + */ + min_size += 8 * num_patches; + if (fw->size < min_size) + return -EINVAL; + + chip_id_base = fw->data + sizeof(struct rtl_epatch_header); + patch_length_base = chip_id_base + (sizeof(u16) * num_patches); + patch_offset_base = patch_length_base + (sizeof(u16) * num_patches); + for (i = 0; i < num_patches; i++) { + u16 chip_id = get_unaligned_le16(chip_id_base + + (i * sizeof(u16))); + if (chip_id == rom_version + 1) { + patch_length = get_unaligned_le16(patch_length_base + + (i * sizeof(u16))); + patch_offset = get_unaligned_le32(patch_offset_base + + (i * sizeof(u32))); + break; + } + } + + if (!patch_offset) { + BT_ERR("%s: didn't find patch for chip id %d", + hdev->name, rom_version); + return -EINVAL; + } + + BT_DBG("length=%x offset=%x index %d", patch_length, patch_offset, i); + min_size = patch_offset + patch_length; + if (fw->size < min_size) + return -EINVAL; + + /* Copy the firmware into a new buffer and write the version at + * the end. + */ + len = patch_length; + buf = kmemdup(fw->data + patch_offset, patch_length, GFP_KERNEL); + if (!buf) + return -ENOMEM; + + memcpy(buf + patch_length - 4, &epatch_info->fw_version, 4); + + *_buf = buf; + return len; +} + +static int rtl_download_firmware(struct hci_dev *hdev, + const unsigned char *data, int fw_len) +{ + struct rtl_download_cmd *dl_cmd; + int frag_num = fw_len / RTL_FRAG_LEN + 1; + int frag_len = RTL_FRAG_LEN; + int ret = 0; + int i; + + dl_cmd = kmalloc(sizeof(struct rtl_download_cmd), GFP_KERNEL); + if (!dl_cmd) + return -ENOMEM; + + for (i = 0; i < frag_num; i++) { + struct rtl_download_response *dl_resp; + struct sk_buff *skb; + + BT_DBG("download fw (%d/%d)", i, frag_num); + + dl_cmd->index = i; + if (i == (frag_num - 1)) { + dl_cmd->index |= 0x80; /* data end */ + frag_len = fw_len % RTL_FRAG_LEN; + } + memcpy(dl_cmd->data, data, frag_len); + + /* Send download command */ + skb = __hci_cmd_sync(hdev, 0xfc20, frag_len + 1, dl_cmd, + HCI_INIT_TIMEOUT); + if (IS_ERR(skb)) { + BT_ERR("%s: download fw command failed (%ld)", + hdev->name, PTR_ERR(skb)); + ret = -PTR_ERR(skb); + goto out; + } + + if (skb->len != sizeof(*dl_resp)) { + BT_ERR("%s: download fw event length mismatch", + hdev->name); + kfree_skb(skb); + ret = -EIO; + goto out; + } + + dl_resp = (struct rtl_download_response *)skb->data; + if (dl_resp->status != 0) { + kfree_skb(skb); + ret = bt_to_errno(dl_resp->status); + goto out; + } + + kfree_skb(skb); + data += RTL_FRAG_LEN; + } + +out: + kfree(dl_cmd); + return ret; +} + +static int btusb_setup_rtl8723a(struct hci_dev *hdev) +{ + struct btusb_data *data = dev_get_drvdata(&hdev->dev); + struct usb_device *udev = interface_to_usbdev(data->intf); + const struct firmware *fw; + int ret; + + BT_INFO("%s: rtl: loading /*(DEBLOBBED)*/", hdev->name); + ret = reject_firmware(&fw, "/*(DEBLOBBED)*/", &udev->dev); + if (ret < 0) { + BT_ERR("%s: Failed to load /*(DEBLOBBED)*/", hdev->name); + return ret; + } + + if (fw->size < 8) { + ret = -EINVAL; + goto out; + } + + /* Check that the firmware doesn't have the epatch signature + * (which is only for RTL8723B and newer). + */ + if (!memcmp(fw->data, RTL_EPATCH_SIGNATURE, 8)) { + BT_ERR("%s: unexpected EPATCH signature!", hdev->name); + ret = -EINVAL; + goto out; + } + + ret = rtl_download_firmware(hdev, fw->data, fw->size); + +out: + release_firmware(fw); + return ret; +} + +static int btusb_setup_rtl8723b(struct hci_dev *hdev, u16 lmp_subver, + const char *fw_name) +{ + struct btusb_data *data = dev_get_drvdata(&hdev->dev); + struct usb_device *udev = interface_to_usbdev(data->intf); + unsigned char *fw_data = NULL; + const struct firmware *fw; + int ret; + + BT_INFO("%s: rtl: loading %s", hdev->name, fw_name); + ret = reject_firmware(&fw, fw_name, &udev->dev); + if (ret < 0) { + BT_ERR("%s: Failed to load %s", hdev->name, fw_name); + return ret; + } + + ret = rtl8723b_parse_firmware(hdev, lmp_subver, fw, &fw_data); + if (ret < 0) + goto out; + + ret = rtl_download_firmware(hdev, fw_data, ret); + kfree(fw_data); + if (ret < 0) + goto out; + +out: + release_firmware(fw); + return ret; +} + +static int btusb_setup_realtek(struct hci_dev *hdev) +{ + struct sk_buff *skb; + struct hci_rp_read_local_version *resp; + u16 lmp_subver; + + skb = btusb_read_local_version(hdev); + if (IS_ERR(skb)) + return -PTR_ERR(skb); + + resp = (struct hci_rp_read_local_version *)skb->data; + BT_INFO("%s: rtl: examining hci_ver=%02x hci_rev=%04x lmp_ver=%02x " + "lmp_subver=%04x", hdev->name, resp->hci_ver, resp->hci_rev, + resp->lmp_ver, resp->lmp_subver); + + lmp_subver = le16_to_cpu(resp->lmp_subver); + kfree_skb(skb); + + /* Match a set of subver values that correspond to stock firmware, + * which is not compatible with standard btusb. + * If matched, upload an alternative firmware that does conform to + * standard btusb. Once that firmware is uploaded, the subver changes + * to a different value. + */ + switch (lmp_subver) { + case RTL_ROM_LMP_8723A: + case RTL_ROM_LMP_3499: + return btusb_setup_rtl8723a(hdev); + case RTL_ROM_LMP_8723B: + return btusb_setup_rtl8723b(hdev, lmp_subver, + "/*(DEBLOBBED)*/"); + case RTL_ROM_LMP_8821A: + return btusb_setup_rtl8723b(hdev, lmp_subver, + "/*(DEBLOBBED)*/"); + case RTL_ROM_LMP_8761A: + return btusb_setup_rtl8723b(hdev, lmp_subver, + "/*(DEBLOBBED)*/"); + default: + BT_INFO("rtl: assuming no firmware upload needed."); + return 0; + } +} + +static const struct firmware *btusb_setup_intel_get_fw(struct hci_dev *hdev, + struct intel_version *ver) +{ + const struct firmware *fw; + char fwname[64]; + int ret; + + snprintf(fwname, sizeof(fwname), + "/*(DEBLOBBED)*/", + ver->hw_platform, ver->hw_variant, ver->hw_revision, + ver->fw_variant, ver->fw_revision, ver->fw_build_num, + ver->fw_build_ww, ver->fw_build_yy); + + ret = reject_firmware(&fw, fwname, &hdev->dev); + if (ret < 0) { + if (ret == -EINVAL) { + BT_ERR("%s Intel firmware file request failed (%d)", + hdev->name, ret); + return NULL; + } + + BT_ERR("%s failed to open Intel firmware file: %s(%d)", + hdev->name, fwname, ret); + + /* If the correct firmware patch file is not found, use the + * default firmware patch file instead + */ + snprintf(fwname, sizeof(fwname), "/*(DEBLOBBED)*/", + ver->hw_platform, ver->hw_variant); + if (reject_firmware(&fw, fwname, &hdev->dev) < 0) { + BT_ERR("%s failed to open default Intel fw file: %s", + hdev->name, fwname); + return NULL; + } + } + + BT_INFO("%s: Intel Bluetooth firmware file: %s", hdev->name, fwname); + + return fw; +} + +static int btusb_setup_intel_patching(struct hci_dev *hdev, + const struct firmware *fw, + const u8 **fw_ptr, int *disable_patch) +{ + struct sk_buff *skb; + struct hci_command_hdr *cmd; + const u8 *cmd_param; + struct hci_event_hdr *evt = NULL; + const u8 *evt_param = NULL; + int remain = fw->size - (*fw_ptr - fw->data); + + /* The first byte indicates the types of the patch command or event. + * 0x01 means HCI command and 0x02 is HCI event. If the first bytes + * in the current firmware buffer doesn't start with 0x01 or + * the size of remain buffer is smaller than HCI command header, + * the firmware file is corrupted and it should stop the patching + * process. + */ + if (remain > HCI_COMMAND_HDR_SIZE && *fw_ptr[0] != 0x01) { + BT_ERR("%s Intel fw corrupted: invalid cmd read", hdev->name); + return -EINVAL; + } + (*fw_ptr)++; + remain--; + + cmd = (struct hci_command_hdr *)(*fw_ptr); + *fw_ptr += sizeof(*cmd); + remain -= sizeof(*cmd); + + /* Ensure that the remain firmware data is long enough than the length + * of command parameter. If not, the firmware file is corrupted. + */ + if (remain < cmd->plen) { + BT_ERR("%s Intel fw corrupted: invalid cmd len", hdev->name); + return -EFAULT; + } + + /* If there is a command that loads a patch in the firmware + * file, then enable the patch upon success, otherwise just + * disable the manufacturer mode, for example patch activation + * is not required when the default firmware patch file is used + * because there are no patch data to load. + */ + if (*disable_patch && le16_to_cpu(cmd->opcode) == 0xfc8e) + *disable_patch = 0; + + cmd_param = *fw_ptr; + *fw_ptr += cmd->plen; + remain -= cmd->plen; + + /* This reads the expected events when the above command is sent to the + * device. Some vendor commands expects more than one events, for + * example command status event followed by vendor specific event. + * For this case, it only keeps the last expected event. so the command + * can be sent with __hci_cmd_sync_ev() which returns the sk_buff of + * last expected event. + */ + while (remain > HCI_EVENT_HDR_SIZE && *fw_ptr[0] == 0x02) { + (*fw_ptr)++; + remain--; + + evt = (struct hci_event_hdr *)(*fw_ptr); + *fw_ptr += sizeof(*evt); + remain -= sizeof(*evt); + + if (remain < evt->plen) { + BT_ERR("%s Intel fw corrupted: invalid evt len", + hdev->name); + return -EFAULT; + } + + evt_param = *fw_ptr; + *fw_ptr += evt->plen; + remain -= evt->plen; + } + + /* Every HCI commands in the firmware file has its correspond event. + * If event is not found or remain is smaller than zero, the firmware + * file is corrupted. + */ + if (!evt || !evt_param || remain < 0) { + BT_ERR("%s Intel fw corrupted: invalid evt read", hdev->name); + return -EFAULT; + } + + skb = __hci_cmd_sync_ev(hdev, le16_to_cpu(cmd->opcode), cmd->plen, + cmd_param, evt->evt, HCI_INIT_TIMEOUT); + if (IS_ERR(skb)) { + BT_ERR("%s sending Intel patch command (0x%4.4x) failed (%ld)", + hdev->name, cmd->opcode, PTR_ERR(skb)); + return PTR_ERR(skb); + } + + /* It ensures that the returned event matches the event data read from + * the firmware file. At fist, it checks the length and then + * the contents of the event. + */ + if (skb->len != evt->plen) { + BT_ERR("%s mismatch event length (opcode 0x%4.4x)", hdev->name, + le16_to_cpu(cmd->opcode)); + kfree_skb(skb); + return -EFAULT; + } + + if (memcmp(skb->data, evt_param, evt->plen)) { + BT_ERR("%s mismatch event parameter (opcode 0x%4.4x)", + hdev->name, le16_to_cpu(cmd->opcode)); + kfree_skb(skb); + return -EFAULT; + } + kfree_skb(skb); + + return 0; +} + +static int btusb_setup_intel(struct hci_dev *hdev) +{ + struct sk_buff *skb; + const struct firmware *fw; + const u8 *fw_ptr; + int disable_patch; + struct intel_version *ver; + + const u8 mfg_enable[] = { 0x01, 0x00 }; + const u8 mfg_disable[] = { 0x00, 0x00 }; + const u8 mfg_reset_deactivate[] = { 0x00, 0x01 }; + const u8 mfg_reset_activate[] = { 0x00, 0x02 }; + + BT_DBG("%s", hdev->name); + + /* The controller has a bug with the first HCI command sent to it + * returning number of completed commands as zero. This would stall the + * command processing in the Bluetooth core. + * + * As a workaround, send HCI Reset command first which will reset the + * number of completed commands and allow normal command processing + * from now on. + */ + skb = __hci_cmd_sync(hdev, HCI_OP_RESET, 0, NULL, HCI_INIT_TIMEOUT); + if (IS_ERR(skb)) { + BT_ERR("%s sending initial HCI reset command failed (%ld)", + hdev->name, PTR_ERR(skb)); + return PTR_ERR(skb); + } + kfree_skb(skb); + + /* Read Intel specific controller version first to allow selection of + * which firmware file to load. + * + * The returned information are hardware variant and revision plus + * firmware variant, revision and build number. + */ + skb = __hci_cmd_sync(hdev, 0xfc05, 0, NULL, HCI_INIT_TIMEOUT); + if (IS_ERR(skb)) { + BT_ERR("%s reading Intel fw version command failed (%ld)", + hdev->name, PTR_ERR(skb)); + return PTR_ERR(skb); + } + + if (skb->len != sizeof(*ver)) { + BT_ERR("%s Intel version event length mismatch", hdev->name); + kfree_skb(skb); + return -EIO; + } + + ver = (struct intel_version *)skb->data; + if (ver->status) { + BT_ERR("%s Intel fw version event failed (%02x)", hdev->name, + ver->status); + kfree_skb(skb); + return -bt_to_errno(ver->status); + } + + BT_INFO("%s: read Intel version: %02x%02x%02x%02x%02x%02x%02x%02x%02x", + hdev->name, ver->hw_platform, ver->hw_variant, + ver->hw_revision, ver->fw_variant, ver->fw_revision, + ver->fw_build_num, ver->fw_build_ww, ver->fw_build_yy, + ver->fw_patch_num); + + /* fw_patch_num indicates the version of patch the device currently + * have. If there is no patch data in the device, it is always 0x00. + * So, if it is other than 0x00, no need to patch the deivce again. + */ + if (ver->fw_patch_num) { + BT_INFO("%s: Intel device is already patched. patch num: %02x", + hdev->name, ver->fw_patch_num); + kfree_skb(skb); + btintel_check_bdaddr(hdev); + return 0; + } + + /* Opens the firmware patch file based on the firmware version read + * from the controller. If it fails to open the matching firmware + * patch file, it tries to open the default firmware patch file. + * If no patch file is found, allow the device to operate without + * a patch. + */ + fw = btusb_setup_intel_get_fw(hdev, ver); + if (!fw) { + kfree_skb(skb); + btintel_check_bdaddr(hdev); + return 0; + } + fw_ptr = fw->data; + + kfree_skb(skb); + + /* This Intel specific command enables the manufacturer mode of the + * controller. + * + * Only while this mode is enabled, the driver can download the + * firmware patch data and configuration parameters. + */ + skb = __hci_cmd_sync(hdev, 0xfc11, 2, mfg_enable, HCI_INIT_TIMEOUT); + if (IS_ERR(skb)) { + BT_ERR("%s entering Intel manufacturer mode failed (%ld)", + hdev->name, PTR_ERR(skb)); + release_firmware(fw); + return PTR_ERR(skb); + } + + if (skb->data[0]) { + u8 evt_status = skb->data[0]; + + BT_ERR("%s enable Intel manufacturer mode event failed (%02x)", + hdev->name, evt_status); + kfree_skb(skb); + release_firmware(fw); + return -bt_to_errno(evt_status); + } + kfree_skb(skb); + + disable_patch = 1; + + /* The firmware data file consists of list of Intel specific HCI + * commands and its expected events. The first byte indicates the + * type of the message, either HCI command or HCI event. + * + * It reads the command and its expected event from the firmware file, + * and send to the controller. Once __hci_cmd_sync_ev() returns, + * the returned event is compared with the event read from the firmware + * file and it will continue until all the messages are downloaded to + * the controller. + * + * Once the firmware patching is completed successfully, + * the manufacturer mode is disabled with reset and activating the + * downloaded patch. + * + * If the firmware patching fails, the manufacturer mode is + * disabled with reset and deactivating the patch. + * + * If the default patch file is used, no reset is done when disabling + * the manufacturer. + */ + while (fw->size > fw_ptr - fw->data) { + int ret; + + ret = btusb_setup_intel_patching(hdev, fw, &fw_ptr, + &disable_patch); + if (ret < 0) + goto exit_mfg_deactivate; + } + + release_firmware(fw); + + if (disable_patch) + goto exit_mfg_disable; + + /* Patching completed successfully and disable the manufacturer mode + * with reset and activate the downloaded firmware patches. + */ + skb = __hci_cmd_sync(hdev, 0xfc11, sizeof(mfg_reset_activate), + mfg_reset_activate, HCI_INIT_TIMEOUT); + if (IS_ERR(skb)) { + BT_ERR("%s exiting Intel manufacturer mode failed (%ld)", + hdev->name, PTR_ERR(skb)); + return PTR_ERR(skb); + } + kfree_skb(skb); + + BT_INFO("%s: Intel Bluetooth firmware patch completed and activated", + hdev->name); + + btintel_check_bdaddr(hdev); + return 0; + +exit_mfg_disable: + /* Disable the manufacturer mode without reset */ + skb = __hci_cmd_sync(hdev, 0xfc11, sizeof(mfg_disable), mfg_disable, + HCI_INIT_TIMEOUT); + if (IS_ERR(skb)) { + BT_ERR("%s exiting Intel manufacturer mode failed (%ld)", + hdev->name, PTR_ERR(skb)); + return PTR_ERR(skb); + } + kfree_skb(skb); + + BT_INFO("%s: Intel Bluetooth firmware patch completed", hdev->name); + + btintel_check_bdaddr(hdev); + return 0; + +exit_mfg_deactivate: + release_firmware(fw); + + /* Patching failed. Disable the manufacturer mode with reset and + * deactivate the downloaded firmware patches. + */ + skb = __hci_cmd_sync(hdev, 0xfc11, sizeof(mfg_reset_deactivate), + mfg_reset_deactivate, HCI_INIT_TIMEOUT); + if (IS_ERR(skb)) { + BT_ERR("%s exiting Intel manufacturer mode failed (%ld)", + hdev->name, PTR_ERR(skb)); + return PTR_ERR(skb); + } + kfree_skb(skb); + + BT_INFO("%s: Intel Bluetooth firmware patch completed and deactivated", + hdev->name); + + btintel_check_bdaddr(hdev); + return 0; +} + +static int inject_cmd_complete(struct hci_dev *hdev, __u16 opcode) +{ + struct sk_buff *skb; + struct hci_event_hdr *hdr; + struct hci_ev_cmd_complete *evt; + + skb = bt_skb_alloc(sizeof(*hdr) + sizeof(*evt) + 1, GFP_ATOMIC); + if (!skb) + return -ENOMEM; + + hdr = (struct hci_event_hdr *)skb_put(skb, sizeof(*hdr)); + hdr->evt = HCI_EV_CMD_COMPLETE; + hdr->plen = sizeof(*evt) + 1; + + evt = (struct hci_ev_cmd_complete *)skb_put(skb, sizeof(*evt)); + evt->ncmd = 0x01; + evt->opcode = cpu_to_le16(opcode); + + *skb_put(skb, 1) = 0x00; + + bt_cb(skb)->pkt_type = HCI_EVENT_PKT; + + return hci_recv_frame(hdev, skb); +} + +static int btusb_recv_bulk_intel(struct btusb_data *data, void *buffer, + int count) +{ + /* When the device is in bootloader mode, then it can send + * events via the bulk endpoint. These events are treated the + * same way as the ones received from the interrupt endpoint. + */ + if (test_bit(BTUSB_BOOTLOADER, &data->flags)) + return btusb_recv_intr(data, buffer, count); + + return btusb_recv_bulk(data, buffer, count); +} + +static void btusb_intel_bootup(struct btusb_data *data, const void *ptr, + unsigned int len) +{ + const struct intel_bootup *evt = ptr; + + if (len != sizeof(*evt)) + return; + + if (test_and_clear_bit(BTUSB_BOOTING, &data->flags)) { + smp_mb__after_atomic(); + wake_up_bit(&data->flags, BTUSB_BOOTING); + } +} + +static void btusb_intel_secure_send_result(struct btusb_data *data, + const void *ptr, unsigned int len) +{ + const struct intel_secure_send_result *evt = ptr; + + if (len != sizeof(*evt)) + return; + + if (evt->result) + set_bit(BTUSB_FIRMWARE_FAILED, &data->flags); + + if (test_and_clear_bit(BTUSB_DOWNLOADING, &data->flags) && + test_bit(BTUSB_FIRMWARE_LOADED, &data->flags)) { + smp_mb__after_atomic(); + wake_up_bit(&data->flags, BTUSB_DOWNLOADING); + } +} + +static int btusb_recv_event_intel(struct hci_dev *hdev, struct sk_buff *skb) +{ + struct btusb_data *data = hci_get_drvdata(hdev); + + if (test_bit(BTUSB_BOOTLOADER, &data->flags)) { + struct hci_event_hdr *hdr = (void *)skb->data; + + if (skb->len > HCI_EVENT_HDR_SIZE && hdr->evt == 0xff && + hdr->plen > 0) { + const void *ptr = skb->data + HCI_EVENT_HDR_SIZE + 1; + unsigned int len = skb->len - HCI_EVENT_HDR_SIZE - 1; + + switch (skb->data[2]) { + case 0x02: + /* When switching to the operational firmware + * the device sends a vendor specific event + * indicating that the bootup completed. + */ + btusb_intel_bootup(data, ptr, len); + break; + case 0x06: + /* When the firmware loading completes the + * device sends out a vendor specific event + * indicating the result of the firmware + * loading. + */ + btusb_intel_secure_send_result(data, ptr, len); + break; + } + } + } + + return hci_recv_frame(hdev, skb); +} + +static int btusb_send_frame_intel(struct hci_dev *hdev, struct sk_buff *skb) +{ + struct btusb_data *data = hci_get_drvdata(hdev); + struct urb *urb; + + BT_DBG("%s", hdev->name); + + if (!test_bit(HCI_RUNNING, &hdev->flags)) + return -EBUSY; + + switch (bt_cb(skb)->pkt_type) { + case HCI_COMMAND_PKT: + if (test_bit(BTUSB_BOOTLOADER, &data->flags)) { + struct hci_command_hdr *cmd = (void *)skb->data; + __u16 opcode = le16_to_cpu(cmd->opcode); + + /* When in bootloader mode and the command 0xfc09 + * is received, it needs to be send down the + * bulk endpoint. So allocate a bulk URB instead. + */ + if (opcode == 0xfc09) + urb = alloc_bulk_urb(hdev, skb); + else + urb = alloc_ctrl_urb(hdev, skb); + + /* When the 0xfc01 command is issued to boot into + * the operational firmware, it will actually not + * send a command complete event. To keep the flow + * control working inject that event here. + */ + if (opcode == 0xfc01) + inject_cmd_complete(hdev, opcode); + } else { + urb = alloc_ctrl_urb(hdev, skb); + } + if (IS_ERR(urb)) + return PTR_ERR(urb); + + hdev->stat.cmd_tx++; + return submit_or_queue_tx_urb(hdev, urb); + + case HCI_ACLDATA_PKT: + urb = alloc_bulk_urb(hdev, skb); + if (IS_ERR(urb)) + return PTR_ERR(urb); + + hdev->stat.acl_tx++; + return submit_or_queue_tx_urb(hdev, urb); + + case HCI_SCODATA_PKT: + if (hci_conn_num(hdev, SCO_LINK) < 1) + return -ENODEV; + + urb = alloc_isoc_urb(hdev, skb); + if (IS_ERR(urb)) + return PTR_ERR(urb); + + hdev->stat.sco_tx++; + return submit_tx_urb(hdev, urb); + } + + return -EILSEQ; +} + +static int btusb_intel_secure_send(struct hci_dev *hdev, u8 fragment_type, + u32 plen, const void *param) +{ + while (plen > 0) { + struct sk_buff *skb; + u8 cmd_param[253], fragment_len = (plen > 252) ? 252 : plen; + + cmd_param[0] = fragment_type; + memcpy(cmd_param + 1, param, fragment_len); + + skb = __hci_cmd_sync(hdev, 0xfc09, fragment_len + 1, + cmd_param, HCI_INIT_TIMEOUT); + if (IS_ERR(skb)) + return PTR_ERR(skb); + + kfree_skb(skb); + + plen -= fragment_len; + param += fragment_len; + } + + return 0; +} + +static void btusb_intel_version_info(struct hci_dev *hdev, + struct intel_version *ver) +{ + const char *variant; + + switch (ver->fw_variant) { + case 0x06: + variant = "Bootloader"; + break; + case 0x23: + variant = "Firmware"; + break; + default: + return; + } + + BT_INFO("%s: %s revision %u.%u build %u week %u %u", hdev->name, + variant, ver->fw_revision >> 4, ver->fw_revision & 0x0f, + ver->fw_build_num, ver->fw_build_ww, 2000 + ver->fw_build_yy); +} + +static int btusb_setup_intel_new(struct hci_dev *hdev) +{ + static const u8 reset_param[] = { 0x00, 0x01, 0x00, 0x01, + 0x00, 0x08, 0x04, 0x00 }; + struct btusb_data *data = hci_get_drvdata(hdev); + struct sk_buff *skb; + struct intel_version *ver; + struct intel_boot_params *params; + const struct firmware *fw; + const u8 *fw_ptr; + u32 frag_len; + char fwname[64]; + ktime_t calltime, delta, rettime; + unsigned long long duration; + int err; + + BT_DBG("%s", hdev->name); + + calltime = ktime_get(); + + /* Read the Intel version information to determine if the device + * is in bootloader mode or if it already has operational firmware + * loaded. + */ + skb = __hci_cmd_sync(hdev, 0xfc05, 0, NULL, HCI_INIT_TIMEOUT); + if (IS_ERR(skb)) { + BT_ERR("%s: Reading Intel version information failed (%ld)", + hdev->name, PTR_ERR(skb)); + return PTR_ERR(skb); + } + + if (skb->len != sizeof(*ver)) { + BT_ERR("%s: Intel version event size mismatch", hdev->name); + kfree_skb(skb); + return -EILSEQ; + } + + ver = (struct intel_version *)skb->data; + if (ver->status) { + BT_ERR("%s: Intel version command failure (%02x)", + hdev->name, ver->status); + err = -bt_to_errno(ver->status); + kfree_skb(skb); + return err; + } + + /* The hardware platform number has a fixed value of 0x37 and + * for now only accept this single value. + */ + if (ver->hw_platform != 0x37) { + BT_ERR("%s: Unsupported Intel hardware platform (%u)", + hdev->name, ver->hw_platform); + kfree_skb(skb); + return -EINVAL; + } + + /* At the moment only the hardware variant iBT 3.0 (LnP/SfP) is + * supported by this firmware loading method. This check has been + * put in place to ensure correct forward compatibility options + * when newer hardware variants come along. + */ + if (ver->hw_variant != 0x0b) { + BT_ERR("%s: Unsupported Intel hardware variant (%u)", + hdev->name, ver->hw_variant); + kfree_skb(skb); + return -EINVAL; + } + + btusb_intel_version_info(hdev, ver); + + /* The firmware variant determines if the device is in bootloader + * mode or is running operational firmware. The value 0x06 identifies + * the bootloader and the value 0x23 identifies the operational + * firmware. + * + * When the operational firmware is already present, then only + * the check for valid Bluetooth device address is needed. This + * determines if the device will be added as configured or + * unconfigured controller. + * + * It is not possible to use the Secure Boot Parameters in this + * case since that command is only available in bootloader mode. + */ + if (ver->fw_variant == 0x23) { + kfree_skb(skb); + clear_bit(BTUSB_BOOTLOADER, &data->flags); + btintel_check_bdaddr(hdev); + return 0; + } + + /* If the device is not in bootloader mode, then the only possible + * choice is to return an error and abort the device initialization. + */ + if (ver->fw_variant != 0x06) { + BT_ERR("%s: Unsupported Intel firmware variant (%u)", + hdev->name, ver->fw_variant); + kfree_skb(skb); + return -ENODEV; + } + + kfree_skb(skb); + + /* Read the secure boot parameters to identify the operating + * details of the bootloader. + */ + skb = __hci_cmd_sync(hdev, 0xfc0d, 0, NULL, HCI_INIT_TIMEOUT); + if (IS_ERR(skb)) { + BT_ERR("%s: Reading Intel boot parameters failed (%ld)", + hdev->name, PTR_ERR(skb)); + return PTR_ERR(skb); + } + + if (skb->len != sizeof(*params)) { + BT_ERR("%s: Intel boot parameters size mismatch", hdev->name); + kfree_skb(skb); + return -EILSEQ; + } + + params = (struct intel_boot_params *)skb->data; + if (params->status) { + BT_ERR("%s: Intel boot parameters command failure (%02x)", + hdev->name, params->status); + err = -bt_to_errno(params->status); + kfree_skb(skb); + return err; + } + + BT_INFO("%s: Device revision is %u", hdev->name, + le16_to_cpu(params->dev_revid)); + + BT_INFO("%s: Secure boot is %s", hdev->name, + params->secure_boot ? "enabled" : "disabled"); + + BT_INFO("%s: Minimum firmware build %u week %u %u", hdev->name, + params->min_fw_build_nn, params->min_fw_build_cw, + 2000 + params->min_fw_build_yy); + + /* It is required that every single firmware fragment is acknowledged + * with a command complete event. If the boot parameters indicate + * that this bootloader does not send them, then abort the setup. + */ + if (params->limited_cce != 0x00) { + BT_ERR("%s: Unsupported Intel firmware loading method (%u)", + hdev->name, params->limited_cce); + kfree_skb(skb); + return -EINVAL; + } + + /* If the OTP has no valid Bluetooth device address, then there will + * also be no valid address for the operational firmware. + */ + if (!bacmp(¶ms->otp_bdaddr, BDADDR_ANY)) { + BT_INFO("%s: No device address configured", hdev->name); + set_bit(HCI_QUIRK_INVALID_BDADDR, &hdev->quirks); + } + + /* With this Intel bootloader only the hardware variant and device + * revision information are used to select the right firmware. + * + * Currently this bootloader support is limited to hardware variant + * iBT 3.0 (LnP/SfP) which is identified by the value 11 (0x0b). + */ + snprintf(fwname, sizeof(fwname), "/*(DEBLOBBED)*/", + le16_to_cpu(params->dev_revid)); + + err = reject_firmware(&fw, fwname, &hdev->dev); + if (err < 0) { + BT_ERR("%s: Failed to load Intel firmware file (%d)", + hdev->name, err); + kfree_skb(skb); + return err; + } + + BT_INFO("%s: Found device firmware: %s", hdev->name, fwname); + + kfree_skb(skb); + + if (fw->size < 644) { + BT_ERR("%s: Invalid size of firmware file (%zu)", + hdev->name, fw->size); + err = -EBADF; + goto done; + } + + set_bit(BTUSB_DOWNLOADING, &data->flags); + + /* Start the firmware download transaction with the Init fragment + * represented by the 128 bytes of CSS header. + */ + err = btusb_intel_secure_send(hdev, 0x00, 128, fw->data); + if (err < 0) { + BT_ERR("%s: Failed to send firmware header (%d)", + hdev->name, err); + goto done; + } + + /* Send the 256 bytes of public key information from the firmware + * as the PKey fragment. + */ + err = btusb_intel_secure_send(hdev, 0x03, 256, fw->data + 128); + if (err < 0) { + BT_ERR("%s: Failed to send firmware public key (%d)", + hdev->name, err); + goto done; + } + + /* Send the 256 bytes of signature information from the firmware + * as the Sign fragment. + */ + err = btusb_intel_secure_send(hdev, 0x02, 256, fw->data + 388); + if (err < 0) { + BT_ERR("%s: Failed to send firmware signature (%d)", + hdev->name, err); + goto done; + } + + fw_ptr = fw->data + 644; + frag_len = 0; + + while (fw_ptr - fw->data < fw->size) { + struct hci_command_hdr *cmd = (void *)(fw_ptr + frag_len); + + frag_len += sizeof(*cmd) + cmd->plen; + + /* The paramter length of the secure send command requires + * a 4 byte alignment. It happens so that the firmware file + * contains proper Intel_NOP commands to align the fragments + * as needed. + * + * Send set of commands with 4 byte alignment from the + * firmware data buffer as a single Data fragement. + */ + if (!(frag_len % 4)) { + err = btusb_intel_secure_send(hdev, 0x01, frag_len, + fw_ptr); + if (err < 0) { + BT_ERR("%s: Failed to send firmware data (%d)", + hdev->name, err); + goto done; + } + + fw_ptr += frag_len; + frag_len = 0; + } + } + + set_bit(BTUSB_FIRMWARE_LOADED, &data->flags); + + BT_INFO("%s: Waiting for firmware download to complete", hdev->name); + + /* Before switching the device into operational mode and with that + * booting the loaded firmware, wait for the bootloader notification + * that all fragments have been successfully received. + * + * When the event processing receives the notification, then the + * BTUSB_DOWNLOADING flag will be cleared. + * + * The firmware loading should not take longer than 5 seconds + * and thus just timeout if that happens and fail the setup + * of this device. + */ + err = wait_on_bit_timeout(&data->flags, BTUSB_DOWNLOADING, + TASK_INTERRUPTIBLE, + msecs_to_jiffies(5000)); + if (err == 1) { + BT_ERR("%s: Firmware loading interrupted", hdev->name); + err = -EINTR; + goto done; + } + + if (err) { + BT_ERR("%s: Firmware loading timeout", hdev->name); + err = -ETIMEDOUT; + goto done; + } + + if (test_bit(BTUSB_FIRMWARE_FAILED, &data->flags)) { + BT_ERR("%s: Firmware loading failed", hdev->name); + err = -ENOEXEC; + goto done; + } + + rettime = ktime_get(); + delta = ktime_sub(rettime, calltime); + duration = (unsigned long long) ktime_to_ns(delta) >> 10; + + BT_INFO("%s: Firmware loaded in %llu usecs", hdev->name, duration); + +done: + release_firmware(fw); + + if (err < 0) + return err; + + calltime = ktime_get(); + + set_bit(BTUSB_BOOTING, &data->flags); + + skb = __hci_cmd_sync(hdev, 0xfc01, sizeof(reset_param), reset_param, + HCI_INIT_TIMEOUT); + if (IS_ERR(skb)) + return PTR_ERR(skb); + + kfree_skb(skb); + + /* The bootloader will not indicate when the device is ready. This + * is done by the operational firmware sending bootup notification. + * + * Booting into operational firmware should not take longer than + * 1 second. However if that happens, then just fail the setup + * since something went wrong. + */ + BT_INFO("%s: Waiting for device to boot", hdev->name); + + err = wait_on_bit_timeout(&data->flags, BTUSB_BOOTING, + TASK_INTERRUPTIBLE, + msecs_to_jiffies(1000)); + + if (err == 1) { + BT_ERR("%s: Device boot interrupted", hdev->name); + return -EINTR; + } + + if (err) { + BT_ERR("%s: Device boot timeout", hdev->name); + return -ETIMEDOUT; + } + + rettime = ktime_get(); + delta = ktime_sub(rettime, calltime); + duration = (unsigned long long) ktime_to_ns(delta) >> 10; + + BT_INFO("%s: Device booted in %llu usecs", hdev->name, duration); + + clear_bit(BTUSB_BOOTLOADER, &data->flags); + + return 0; +} + +static void btusb_hw_error_intel(struct hci_dev *hdev, u8 code) +{ + struct sk_buff *skb; + u8 type = 0x00; + + BT_ERR("%s: Hardware error 0x%2.2x", hdev->name, code); + + skb = __hci_cmd_sync(hdev, HCI_OP_RESET, 0, NULL, HCI_INIT_TIMEOUT); + if (IS_ERR(skb)) { + BT_ERR("%s: Reset after hardware error failed (%ld)", + hdev->name, PTR_ERR(skb)); + return; + } + kfree_skb(skb); + + skb = __hci_cmd_sync(hdev, 0xfc22, 1, &type, HCI_INIT_TIMEOUT); + if (IS_ERR(skb)) { + BT_ERR("%s: Retrieving Intel exception info failed (%ld)", + hdev->name, PTR_ERR(skb)); + return; + } + + if (skb->len != 13) { + BT_ERR("%s: Exception info size mismatch", hdev->name); + kfree_skb(skb); + return; + } + + if (skb->data[0] != 0x00) { + BT_ERR("%s: Exception info command failure (%02x)", + hdev->name, skb->data[0]); + kfree_skb(skb); + return; + } + + BT_ERR("%s: Exception info %s", hdev->name, (char *)(skb->data + 1)); + + kfree_skb(skb); +} + +static int btusb_shutdown_intel(struct hci_dev *hdev) +{ + struct sk_buff *skb; + long ret; + + /* Some platforms have an issue with BT LED when the interface is + * down or BT radio is turned off, which takes 5 seconds to BT LED + * goes off. This command turns off the BT LED immediately. + */ + skb = __hci_cmd_sync(hdev, 0xfc3f, 0, NULL, HCI_INIT_TIMEOUT); + if (IS_ERR(skb)) { + ret = PTR_ERR(skb); + BT_ERR("%s: turning off Intel device LED failed (%ld)", + hdev->name, ret); + return ret; + } + kfree_skb(skb); + + return 0; +} + +static int btusb_set_bdaddr_marvell(struct hci_dev *hdev, + const bdaddr_t *bdaddr) +{ + struct sk_buff *skb; + u8 buf[8]; + long ret; + + buf[0] = 0xfe; + buf[1] = sizeof(bdaddr_t); + memcpy(buf + 2, bdaddr, sizeof(bdaddr_t)); + + skb = __hci_cmd_sync(hdev, 0xfc22, sizeof(buf), buf, HCI_INIT_TIMEOUT); + if (IS_ERR(skb)) { + ret = PTR_ERR(skb); + BT_ERR("%s: changing Marvell device address failed (%ld)", + hdev->name, ret); + return ret; + } + kfree_skb(skb); + + return 0; +} + +static int btusb_set_bdaddr_ath3012(struct hci_dev *hdev, + const bdaddr_t *bdaddr) +{ + struct sk_buff *skb; + u8 buf[10]; + long ret; + + buf[0] = 0x01; + buf[1] = 0x01; + buf[2] = 0x00; + buf[3] = sizeof(bdaddr_t); + memcpy(buf + 4, bdaddr, sizeof(bdaddr_t)); + + skb = __hci_cmd_sync(hdev, 0xfc0b, sizeof(buf), buf, HCI_INIT_TIMEOUT); + if (IS_ERR(skb)) { + ret = PTR_ERR(skb); + BT_ERR("%s: Change address command failed (%ld)", + hdev->name, ret); + return ret; + } + kfree_skb(skb); + + return 0; +} + +#define QCA_DFU_PACKET_LEN 4096 + +#define QCA_GET_TARGET_VERSION 0x09 +#define QCA_CHECK_STATUS 0x05 +#define QCA_DFU_DOWNLOAD 0x01 + +#define QCA_SYSCFG_UPDATED 0x40 +#define QCA_PATCH_UPDATED 0x80 +#define QCA_DFU_TIMEOUT 3000 + +struct qca_version { + __le32 rom_version; + __le32 patch_version; + __le32 ram_version; + __le32 ref_clock; + __u8 reserved[4]; +} __packed; + +struct qca_rampatch_version { + __le16 rom_version; + __le16 patch_version; +} __packed; + +struct qca_device_info { + u32 rom_version; + u8 rampatch_hdr; /* length of header in rampatch */ + u8 nvm_hdr; /* length of header in NVM */ + u8 ver_offset; /* offset of version structure in rampatch */ +}; + +static const struct qca_device_info qca_devices_table[] = { + { 0x00000100, 20, 4, 10 }, /* Rome 1.0 */ + { 0x00000101, 20, 4, 10 }, /* Rome 1.1 */ + { 0x00000201, 28, 4, 18 }, /* Rome 2.1 */ + { 0x00000300, 28, 4, 18 }, /* Rome 3.0 */ + { 0x00000302, 28, 4, 18 }, /* Rome 3.2 */ +}; + +static int btusb_qca_send_vendor_req(struct hci_dev *hdev, u8 request, + void *data, u16 size) +{ + struct btusb_data *btdata = hci_get_drvdata(hdev); + struct usb_device *udev = btdata->udev; + int pipe, err; + u8 *buf; + + buf = kmalloc(size, GFP_KERNEL); + if (!buf) + return -ENOMEM; + + /* Found some of USB hosts have IOT issues with ours so that we should + * not wait until HCI layer is ready. + */ + pipe = usb_rcvctrlpipe(udev, 0); + err = usb_control_msg(udev, pipe, request, USB_TYPE_VENDOR | USB_DIR_IN, + 0, 0, buf, size, USB_CTRL_SET_TIMEOUT); + if (err < 0) { + BT_ERR("%s: Failed to access otp area (%d)", hdev->name, err); + goto done; + } + + memcpy(data, buf, size); + +done: + kfree(buf); + + return err; +} + +static int btusb_setup_qca_download_fw(struct hci_dev *hdev, + const struct firmware *firmware, + size_t hdr_size) +{ + struct btusb_data *btdata = hci_get_drvdata(hdev); + struct usb_device *udev = btdata->udev; + size_t count, size, sent = 0; + int pipe, len, err; + u8 *buf; + + buf = kmalloc(QCA_DFU_PACKET_LEN, GFP_KERNEL); + if (!buf) + return -ENOMEM; + + count = firmware->size; + + size = min_t(size_t, count, hdr_size); + memcpy(buf, firmware->data, size); + + /* USB patches should go down to controller through USB path + * because binary format fits to go down through USB channel. + * USB control path is for patching headers and USB bulk is for + * patch body. + */ + pipe = usb_sndctrlpipe(udev, 0); + err = usb_control_msg(udev, pipe, QCA_DFU_DOWNLOAD, USB_TYPE_VENDOR, + 0, 0, buf, size, USB_CTRL_SET_TIMEOUT); + if (err < 0) { + BT_ERR("%s: Failed to send headers (%d)", hdev->name, err); + goto done; + } + + sent += size; + count -= size; + + while (count) { + size = min_t(size_t, count, QCA_DFU_PACKET_LEN); + + memcpy(buf, firmware->data + sent, size); + + pipe = usb_sndbulkpipe(udev, 0x02); + err = usb_bulk_msg(udev, pipe, buf, size, &len, + QCA_DFU_TIMEOUT); + if (err < 0) { + BT_ERR("%s: Failed to send body at %zd of %zd (%d)", + hdev->name, sent, firmware->size, err); + break; + } + + if (size != len) { + BT_ERR("%s: Failed to get bulk buffer", hdev->name); + err = -EILSEQ; + break; + } + + sent += size; + count -= size; + } + +done: + kfree(buf); + return err; +} + +static int btusb_setup_qca_load_rampatch(struct hci_dev *hdev, + struct qca_version *ver, + const struct qca_device_info *info) +{ + struct qca_rampatch_version *rver; + const struct firmware *fw; + u32 ver_rom, ver_patch; + u16 rver_rom, rver_patch; + char fwname[64]; + int err; + + ver_rom = le32_to_cpu(ver->rom_version); + ver_patch = le32_to_cpu(ver->patch_version); + + snprintf(fwname, sizeof(fwname), "/*(DEBLOBBED)*/", ver_rom); + + err = reject_firmware(&fw, fwname, &hdev->dev); + if (err) { + BT_ERR("%s: failed to request rampatch file: %s (%d)", + hdev->name, fwname, err); + return err; + } + + BT_INFO("%s: using rampatch file: %s", hdev->name, fwname); + + rver = (struct qca_rampatch_version *)(fw->data + info->ver_offset); + rver_rom = le16_to_cpu(rver->rom_version); + rver_patch = le16_to_cpu(rver->patch_version); + + BT_INFO("%s: QCA: patch rome 0x%x build 0x%x, firmware rome 0x%x " + "build 0x%x", hdev->name, rver_rom, rver_patch, ver_rom, + ver_patch); + + if (rver_rom != ver_rom || rver_patch <= ver_patch) { + BT_ERR("%s: rampatch file version did not match with firmware", + hdev->name); + err = -EINVAL; + goto done; + } + + err = btusb_setup_qca_download_fw(hdev, fw, info->rampatch_hdr); + +done: + release_firmware(fw); + + return err; +} + +static int btusb_setup_qca_load_nvm(struct hci_dev *hdev, + struct qca_version *ver, + const struct qca_device_info *info) +{ + const struct firmware *fw; + char fwname[64]; + int err; + + snprintf(fwname, sizeof(fwname), "/*(DEBLOBBED)*/", + le32_to_cpu(ver->rom_version)); + + err = reject_firmware(&fw, fwname, &hdev->dev); + if (err) { + BT_ERR("%s: failed to request NVM file: %s (%d)", + hdev->name, fwname, err); + return err; + } + + BT_INFO("%s: using NVM file: %s", hdev->name, fwname); + + err = btusb_setup_qca_download_fw(hdev, fw, info->nvm_hdr); + + release_firmware(fw); + + return err; +} + +static int btusb_setup_qca(struct hci_dev *hdev) +{ + const struct qca_device_info *info = NULL; + struct qca_version ver; + u32 ver_rom; + u8 status; + int i, err; + + err = btusb_qca_send_vendor_req(hdev, QCA_GET_TARGET_VERSION, &ver, + sizeof(ver)); + if (err < 0) + return err; + + ver_rom = le32_to_cpu(ver.rom_version); + for (i = 0; i < ARRAY_SIZE(qca_devices_table); i++) { + if (ver_rom == qca_devices_table[i].rom_version) + info = &qca_devices_table[i]; + } + if (!info) { + BT_ERR("%s: don't support firmware rome 0x%x", hdev->name, + ver_rom); + return -ENODEV; + } + + err = btusb_qca_send_vendor_req(hdev, QCA_CHECK_STATUS, &status, + sizeof(status)); + if (err < 0) + return err; + + if (!(status & QCA_PATCH_UPDATED)) { + err = btusb_setup_qca_load_rampatch(hdev, &ver, info); + if (err < 0) + return err; + } + + if (!(status & QCA_SYSCFG_UPDATED)) { + err = btusb_setup_qca_load_nvm(hdev, &ver, info); + if (err < 0) + return err; + } + + return 0; +} + +static int btusb_probe(struct usb_interface *intf, + const struct usb_device_id *id) +{ + struct usb_endpoint_descriptor *ep_desc; + struct btusb_data *data; + struct hci_dev *hdev; + int i, err; + + BT_DBG("intf %p id %p", intf, id); + + /* interface numbers are hardcoded in the spec */ + if (intf->cur_altsetting->desc.bInterfaceNumber != 0) + return -ENODEV; + + if (!id->driver_info) { + const struct usb_device_id *match; + + match = usb_match_id(intf, blacklist_table); + if (match) + id = match; + } + + if (id->driver_info == BTUSB_IGNORE) + return -ENODEV; + + if (id->driver_info & BTUSB_ATH3012) { + struct usb_device *udev = interface_to_usbdev(intf); + + /* Old firmware would otherwise let ath3k driver load + * patch and sysconfig files */ + if (le16_to_cpu(udev->descriptor.bcdDevice) <= 0x0001) + return -ENODEV; + } + + data = devm_kzalloc(&intf->dev, sizeof(*data), GFP_KERNEL); + if (!data) + return -ENOMEM; + + for (i = 0; i < intf->cur_altsetting->desc.bNumEndpoints; i++) { + ep_desc = &intf->cur_altsetting->endpoint[i].desc; + + if (!data->intr_ep && usb_endpoint_is_int_in(ep_desc)) { + data->intr_ep = ep_desc; + continue; + } + + if (!data->bulk_tx_ep && usb_endpoint_is_bulk_out(ep_desc)) { + data->bulk_tx_ep = ep_desc; + continue; + } + + if (!data->bulk_rx_ep && usb_endpoint_is_bulk_in(ep_desc)) { + data->bulk_rx_ep = ep_desc; + continue; + } + } + + if (!data->intr_ep || !data->bulk_tx_ep || !data->bulk_rx_ep) + return -ENODEV; + + if (id->driver_info & BTUSB_AMP) { + data->cmdreq_type = USB_TYPE_CLASS | 0x01; + data->cmdreq = 0x2b; + } else { + data->cmdreq_type = USB_TYPE_CLASS; + data->cmdreq = 0x00; + } + + data->udev = interface_to_usbdev(intf); + data->intf = intf; + + INIT_WORK(&data->work, btusb_work); + INIT_WORK(&data->waker, btusb_waker); + init_usb_anchor(&data->deferred); + init_usb_anchor(&data->tx_anchor); + spin_lock_init(&data->txlock); + + init_usb_anchor(&data->intr_anchor); + init_usb_anchor(&data->bulk_anchor); + init_usb_anchor(&data->isoc_anchor); + spin_lock_init(&data->rxlock); + + if (id->driver_info & BTUSB_INTEL_NEW) { + data->recv_event = btusb_recv_event_intel; + data->recv_bulk = btusb_recv_bulk_intel; + set_bit(BTUSB_BOOTLOADER, &data->flags); + } else { + data->recv_event = hci_recv_frame; + data->recv_bulk = btusb_recv_bulk; + } + + hdev = hci_alloc_dev(); + if (!hdev) + return -ENOMEM; + + hdev->bus = HCI_USB; + hci_set_drvdata(hdev, data); + + if (id->driver_info & BTUSB_AMP) + hdev->dev_type = HCI_AMP; + else + hdev->dev_type = HCI_BREDR; + + data->hdev = hdev; + + SET_HCIDEV_DEV(hdev, &intf->dev); + + hdev->open = btusb_open; + hdev->close = btusb_close; + hdev->flush = btusb_flush; + hdev->send = btusb_send_frame; + hdev->notify = btusb_notify; + + if (id->driver_info & BTUSB_BCM92035) + hdev->setup = btusb_setup_bcm92035; + +#ifdef CONFIG_BT_HCIBTUSB_BCM + if (id->driver_info & BTUSB_BCM_PATCHRAM) { + hdev->setup = btbcm_setup_patchram; + hdev->set_bdaddr = btbcm_set_bdaddr; + } + + if (id->driver_info & BTUSB_BCM_APPLE) + hdev->setup = btbcm_setup_apple; +#endif + + if (id->driver_info & BTUSB_INTEL) { + hdev->setup = btusb_setup_intel; + hdev->shutdown = btusb_shutdown_intel; + hdev->set_bdaddr = btintel_set_bdaddr; + set_bit(HCI_QUIRK_STRICT_DUPLICATE_FILTER, &hdev->quirks); + set_bit(HCI_QUIRK_SIMULTANEOUS_DISCOVERY, &hdev->quirks); + } + + if (id->driver_info & BTUSB_INTEL_NEW) { + hdev->send = btusb_send_frame_intel; + hdev->setup = btusb_setup_intel_new; + hdev->hw_error = btusb_hw_error_intel; + hdev->set_bdaddr = btintel_set_bdaddr; + set_bit(HCI_QUIRK_STRICT_DUPLICATE_FILTER, &hdev->quirks); + } + + if (id->driver_info & BTUSB_MARVELL) + hdev->set_bdaddr = btusb_set_bdaddr_marvell; + + if (id->driver_info & BTUSB_SWAVE) { + set_bit(HCI_QUIRK_FIXUP_INQUIRY_MODE, &hdev->quirks); + set_bit(HCI_QUIRK_BROKEN_LOCAL_COMMANDS, &hdev->quirks); + } + + if (id->driver_info & BTUSB_INTEL_BOOT) + set_bit(HCI_QUIRK_RAW_DEVICE, &hdev->quirks); + + if (id->driver_info & BTUSB_ATH3012) { + hdev->set_bdaddr = btusb_set_bdaddr_ath3012; + set_bit(HCI_QUIRK_SIMULTANEOUS_DISCOVERY, &hdev->quirks); + set_bit(HCI_QUIRK_STRICT_DUPLICATE_FILTER, &hdev->quirks); + } + + if (id->driver_info & BTUSB_QCA_ROME) { + data->setup_on_usb = btusb_setup_qca; + hdev->set_bdaddr = btusb_set_bdaddr_ath3012; + } + + if (id->driver_info & BTUSB_REALTEK) + hdev->setup = btusb_setup_realtek; + + if (id->driver_info & BTUSB_AMP) { + /* AMP controllers do not support SCO packets */ + data->isoc = NULL; + } else { + /* Interface numbers are hardcoded in the specification */ + data->isoc = usb_ifnum_to_if(data->udev, 1); + } + + if (!reset) + set_bit(HCI_QUIRK_RESET_ON_CLOSE, &hdev->quirks); + + if (force_scofix || id->driver_info & BTUSB_WRONG_SCO_MTU) { + if (!disable_scofix) + set_bit(HCI_QUIRK_FIXUP_BUFFER_SIZE, &hdev->quirks); + } + + if (id->driver_info & BTUSB_BROKEN_ISOC) + data->isoc = NULL; + + if (id->driver_info & BTUSB_DIGIANSWER) { + data->cmdreq_type = USB_TYPE_VENDOR; + set_bit(HCI_QUIRK_RESET_ON_CLOSE, &hdev->quirks); + } + + if (id->driver_info & BTUSB_CSR) { + struct usb_device *udev = data->udev; + u16 bcdDevice = le16_to_cpu(udev->descriptor.bcdDevice); + + /* Old firmware would otherwise execute USB reset */ + if (bcdDevice < 0x117) + set_bit(HCI_QUIRK_RESET_ON_CLOSE, &hdev->quirks); + + /* Fake CSR devices with broken commands */ + if (bcdDevice <= 0x100) + hdev->setup = btusb_setup_csr; + + set_bit(HCI_QUIRK_SIMULTANEOUS_DISCOVERY, &hdev->quirks); + } + + if (id->driver_info & BTUSB_SNIFFER) { + struct usb_device *udev = data->udev; + + /* New sniffer firmware has crippled HCI interface */ + if (le16_to_cpu(udev->descriptor.bcdDevice) > 0x997) + set_bit(HCI_QUIRK_RAW_DEVICE, &hdev->quirks); + } + + if (id->driver_info & BTUSB_INTEL_BOOT) { + /* A bug in the bootloader causes that interrupt interface is + * only enabled after receiving SetInterface(0, AltSetting=0). + */ + err = usb_set_interface(data->udev, 0, 0); + if (err < 0) { + BT_ERR("failed to set interface 0, alt 0 %d", err); + hci_free_dev(hdev); + return err; + } + } + + if (data->isoc) { + err = usb_driver_claim_interface(&btusb_driver, + data->isoc, data); + if (err < 0) { + hci_free_dev(hdev); + return err; + } + } + + err = hci_register_dev(hdev); + if (err < 0) { + hci_free_dev(hdev); + return err; + } + + usb_set_intfdata(intf, data); + + return 0; +} + +static void btusb_disconnect(struct usb_interface *intf) +{ + struct btusb_data *data = usb_get_intfdata(intf); + struct hci_dev *hdev; + + BT_DBG("intf %p", intf); + + if (!data) + return; + + hdev = data->hdev; + usb_set_intfdata(data->intf, NULL); + + if (data->isoc) + usb_set_intfdata(data->isoc, NULL); + + hci_unregister_dev(hdev); + + if (intf == data->isoc) + usb_driver_release_interface(&btusb_driver, data->intf); + else if (data->isoc) + usb_driver_release_interface(&btusb_driver, data->isoc); + + hci_free_dev(hdev); +} + +#ifdef CONFIG_PM +static int btusb_suspend(struct usb_interface *intf, pm_message_t message) +{ + struct btusb_data *data = usb_get_intfdata(intf); + + BT_DBG("intf %p", intf); + + if (data->suspend_count++) + return 0; + + spin_lock_irq(&data->txlock); + if (!(PMSG_IS_AUTO(message) && data->tx_in_flight)) { + set_bit(BTUSB_SUSPENDING, &data->flags); + spin_unlock_irq(&data->txlock); + } else { + spin_unlock_irq(&data->txlock); + data->suspend_count--; + return -EBUSY; + } + + cancel_work_sync(&data->work); + + btusb_stop_traffic(data); + usb_kill_anchored_urbs(&data->tx_anchor); + + return 0; +} + +static void play_deferred(struct btusb_data *data) +{ + struct urb *urb; + int err; + + while ((urb = usb_get_from_anchor(&data->deferred))) { + err = usb_submit_urb(urb, GFP_ATOMIC); + if (err < 0) + break; + + data->tx_in_flight++; + } + usb_scuttle_anchored_urbs(&data->deferred); +} + +static int btusb_resume(struct usb_interface *intf) +{ + struct btusb_data *data = usb_get_intfdata(intf); + struct hci_dev *hdev = data->hdev; + int err = 0; + + BT_DBG("intf %p", intf); + + if (--data->suspend_count) + return 0; + + if (!test_bit(HCI_RUNNING, &hdev->flags)) + goto done; + + if (test_bit(BTUSB_INTR_RUNNING, &data->flags)) { + err = btusb_submit_intr_urb(hdev, GFP_NOIO); + if (err < 0) { + clear_bit(BTUSB_INTR_RUNNING, &data->flags); + goto failed; + } + } + + if (test_bit(BTUSB_BULK_RUNNING, &data->flags)) { + err = btusb_submit_bulk_urb(hdev, GFP_NOIO); + if (err < 0) { + clear_bit(BTUSB_BULK_RUNNING, &data->flags); + goto failed; + } + + btusb_submit_bulk_urb(hdev, GFP_NOIO); + } + + if (test_bit(BTUSB_ISOC_RUNNING, &data->flags)) { + if (btusb_submit_isoc_urb(hdev, GFP_NOIO) < 0) + clear_bit(BTUSB_ISOC_RUNNING, &data->flags); + else + btusb_submit_isoc_urb(hdev, GFP_NOIO); + } + + spin_lock_irq(&data->txlock); + play_deferred(data); + clear_bit(BTUSB_SUSPENDING, &data->flags); + spin_unlock_irq(&data->txlock); + schedule_work(&data->work); + + return 0; + +failed: + usb_scuttle_anchored_urbs(&data->deferred); +done: + spin_lock_irq(&data->txlock); + clear_bit(BTUSB_SUSPENDING, &data->flags); + spin_unlock_irq(&data->txlock); + + return err; +} +#endif + +static struct usb_driver btusb_driver = { + .name = "btusb", + .probe = btusb_probe, + .disconnect = btusb_disconnect, +#ifdef CONFIG_PM + .suspend = btusb_suspend, + .resume = btusb_resume, +#endif + .id_table = btusb_table, + .supports_autosuspend = 1, + .disable_hub_initiated_lpm = 1, +}; + +module_usb_driver(btusb_driver); + +module_param(disable_scofix, bool, 0644); +MODULE_PARM_DESC(disable_scofix, "Disable fixup of wrong SCO buffer size"); + +module_param(force_scofix, bool, 0644); +MODULE_PARM_DESC(force_scofix, "Force fixup of wrong SCO buffers size"); + +module_param(reset, bool, 0644); +MODULE_PARM_DESC(reset, "Send HCI reset command on initialization"); + +MODULE_AUTHOR("Marcel Holtmann <marcel@holtmann.org>"); +MODULE_DESCRIPTION("Generic Bluetooth USB driver ver " VERSION); +MODULE_VERSION(VERSION); +MODULE_LICENSE("GPL"); |