summaryrefslogtreecommitdiff
path: root/drivers/bluetooth
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/bluetooth')
-rw-r--r--drivers/bluetooth/Kconfig18
-rw-r--r--drivers/bluetooth/Makefile2
-rw-r--r--drivers/bluetooth/ath3k.c4
-rw-r--r--drivers/bluetooth/bfusb.c2
-rw-r--r--drivers/bluetooth/bt3c_cs.c2
-rw-r--r--drivers/bluetooth/btbcm.c8
-rw-r--r--drivers/bluetooth/btintel.c81
-rw-r--r--drivers/bluetooth/btintel.h19
-rw-r--r--drivers/bluetooth/btmrvl_drv.h6
-rw-r--r--drivers/bluetooth/btmrvl_sdio.c7
-rw-r--r--drivers/bluetooth/btqca.c392
-rw-r--r--drivers/bluetooth/btqca.h135
-rw-r--r--drivers/bluetooth/btusb.c103
-rw-r--r--drivers/bluetooth/dtl1_cs.c6
-rw-r--r--drivers/bluetooth/hci_bcm.c326
-rw-r--r--drivers/bluetooth/hci_h4.c9
-rw-r--r--drivers/bluetooth/hci_h5.c2
-rw-r--r--drivers/bluetooth/hci_intel.c856
-rw-r--r--drivers/bluetooth/hci_ldisc.c14
-rw-r--r--drivers/bluetooth/hci_qca.c969
-rw-r--r--drivers/bluetooth/hci_uart.h13
21 files changed, 2867 insertions, 107 deletions
diff --git a/drivers/bluetooth/Kconfig b/drivers/bluetooth/Kconfig
index 2e777071e..0bd88c942 100644
--- a/drivers/bluetooth/Kconfig
+++ b/drivers/bluetooth/Kconfig
@@ -13,6 +13,10 @@ config BT_RTL
tristate
select FW_LOADER
+config BT_QCA
+ tristate
+ select FW_LOADER
+
config BT_HCIBTUSB
tristate "HCI USB driver"
depends on USB
@@ -132,6 +136,7 @@ config BT_HCIUART_3WIRE
config BT_HCIUART_INTEL
bool "Intel protocol support"
depends on BT_HCIUART
+ select BT_HCIUART_H4
select BT_INTEL
help
The Intel protocol support enables Bluetooth HCI over serial
@@ -150,6 +155,19 @@ config BT_HCIUART_BCM
Say Y here to compile support for Broadcom protocol.
+config BT_HCIUART_QCA
+ bool "Qualcomm Atheros protocol support"
+ depends on BT_HCIUART
+ select BT_HCIUART_H4
+ select BT_QCA
+ help
+ The Qualcomm Atheros protocol supports HCI In-Band Sleep feature
+ over serial port interface(H4) between controller and host.
+ This protocol is required for UART clock control for QCA Bluetooth
+ devices.
+
+ Say Y here to compile support for QCA protocol.
+
config BT_HCIBCM203X
tristate "HCI BCM203x USB driver"
depends on USB
diff --git a/drivers/bluetooth/Makefile b/drivers/bluetooth/Makefile
index f40e194e7..07c9cf381 100644
--- a/drivers/bluetooth/Makefile
+++ b/drivers/bluetooth/Makefile
@@ -22,6 +22,7 @@ obj-$(CONFIG_BT_MRVL_SDIO) += btmrvl_sdio.o
obj-$(CONFIG_BT_WILINK) += btwilink.o
obj-$(CONFIG_BT_BCM) += btbcm.o
obj-$(CONFIG_BT_RTL) += btrtl.o
+obj-$(CONFIG_BT_QCA) += btqca.o
btmrvl-y := btmrvl_main.o
btmrvl-$(CONFIG_DEBUG_FS) += btmrvl_debugfs.o
@@ -34,6 +35,7 @@ hci_uart-$(CONFIG_BT_HCIUART_ATH3K) += hci_ath.o
hci_uart-$(CONFIG_BT_HCIUART_3WIRE) += hci_h5.o
hci_uart-$(CONFIG_BT_HCIUART_INTEL) += hci_intel.o
hci_uart-$(CONFIG_BT_HCIUART_BCM) += hci_bcm.o
+hci_uart-$(CONFIG_BT_HCIUART_QCA) += hci_qca.o
hci_uart-objs := $(hci_uart-y)
ccflags-y += -D__CHECK_ENDIAN__
diff --git a/drivers/bluetooth/ath3k.c b/drivers/bluetooth/ath3k.c
index 06dbb4d97..cda867ada 100644
--- a/drivers/bluetooth/ath3k.c
+++ b/drivers/bluetooth/ath3k.c
@@ -93,6 +93,7 @@ static const struct usb_device_id ath3k_table[] = {
{ USB_DEVICE(0x04CA, 0x300f) },
{ USB_DEVICE(0x04CA, 0x3010) },
{ USB_DEVICE(0x0930, 0x0219) },
+ { USB_DEVICE(0x0930, 0x021c) },
{ USB_DEVICE(0x0930, 0x0220) },
{ USB_DEVICE(0x0930, 0x0227) },
{ USB_DEVICE(0x0b05, 0x17d0) },
@@ -104,6 +105,7 @@ static const struct usb_device_id ath3k_table[] = {
{ USB_DEVICE(0x0CF3, 0x311F) },
{ USB_DEVICE(0x0cf3, 0x3121) },
{ USB_DEVICE(0x0CF3, 0x817a) },
+ { USB_DEVICE(0x0CF3, 0x817b) },
{ USB_DEVICE(0x0cf3, 0xe003) },
{ USB_DEVICE(0x0CF3, 0xE004) },
{ USB_DEVICE(0x0CF3, 0xE005) },
@@ -153,6 +155,7 @@ static const struct usb_device_id ath3k_blist_tbl[] = {
{ USB_DEVICE(0x04ca, 0x300f), .driver_info = BTUSB_ATH3012 },
{ USB_DEVICE(0x04ca, 0x3010), .driver_info = BTUSB_ATH3012 },
{ USB_DEVICE(0x0930, 0x0219), .driver_info = BTUSB_ATH3012 },
+ { USB_DEVICE(0x0930, 0x021c), .driver_info = BTUSB_ATH3012 },
{ USB_DEVICE(0x0930, 0x0220), .driver_info = BTUSB_ATH3012 },
{ USB_DEVICE(0x0930, 0x0227), .driver_info = BTUSB_ATH3012 },
{ USB_DEVICE(0x0b05, 0x17d0), .driver_info = BTUSB_ATH3012 },
@@ -164,6 +167,7 @@ static const struct usb_device_id ath3k_blist_tbl[] = {
{ USB_DEVICE(0x0cf3, 0x311F), .driver_info = BTUSB_ATH3012 },
{ USB_DEVICE(0x0cf3, 0x3121), .driver_info = BTUSB_ATH3012 },
{ USB_DEVICE(0x0CF3, 0x817a), .driver_info = BTUSB_ATH3012 },
+ { USB_DEVICE(0x0CF3, 0x817b), .driver_info = BTUSB_ATH3012 },
{ USB_DEVICE(0x0cf3, 0xe004), .driver_info = BTUSB_ATH3012 },
{ USB_DEVICE(0x0cf3, 0xe005), .driver_info = BTUSB_ATH3012 },
{ USB_DEVICE(0x0cf3, 0xe006), .driver_info = BTUSB_ATH3012 },
diff --git a/drivers/bluetooth/bfusb.c b/drivers/bluetooth/bfusb.c
index 73b214c39..b45c22fe1 100644
--- a/drivers/bluetooth/bfusb.c
+++ b/drivers/bluetooth/bfusb.c
@@ -492,7 +492,7 @@ static int bfusb_send_frame(struct hci_dev *hdev, struct sk_buff *skb)
case HCI_SCODATA_PKT:
hdev->stat.sco_tx++;
break;
- };
+ }
/* Prepend skb with frame type */
memcpy(skb_push(skb, 1), &bt_cb(skb)->pkt_type, 1);
diff --git a/drivers/bluetooth/bt3c_cs.c b/drivers/bluetooth/bt3c_cs.c
index dbc3767b0..1549f861b 100644
--- a/drivers/bluetooth/bt3c_cs.c
+++ b/drivers/bluetooth/bt3c_cs.c
@@ -427,7 +427,7 @@ static int bt3c_hci_send_frame(struct hci_dev *hdev, struct sk_buff *skb)
case HCI_SCODATA_PKT:
hdev->stat.sco_tx++;
break;
- };
+ }
/* Prepend skb with frame type */
memcpy(skb_push(skb, 1), &bt_cb(skb)->pkt_type, 1);
diff --git a/drivers/bluetooth/btbcm.c b/drivers/bluetooth/btbcm.c
index 40cb8fadf..2fc8a6ed7 100644
--- a/drivers/bluetooth/btbcm.c
+++ b/drivers/bluetooth/btbcm.c
@@ -34,6 +34,7 @@
#define BDADDR_BCM20702A0 (&(bdaddr_t) {{0x00, 0xa0, 0x02, 0x70, 0x20, 0x00}})
#define BDADDR_BCM4324B3 (&(bdaddr_t) {{0x00, 0x00, 0x00, 0xb3, 0x24, 0x43}})
+#define BDADDR_BCM4330B1 (&(bdaddr_t) {{0x00, 0x00, 0x00, 0xb1, 0x30, 0x43}})
int btbcm_check_bdaddr(struct hci_dev *hdev)
{
@@ -66,9 +67,13 @@ int btbcm_check_bdaddr(struct hci_dev *hdev)
*
* The address 43:24:B3:00:00:00 indicates a BCM4324B3 controller
* with waiting for configuration state.
+ *
+ * The address 43:30:B1:00:00:00 indicates a BCM4330B1 controller
+ * with waiting for configuration state.
*/
if (!bacmp(&bda->bdaddr, BDADDR_BCM20702A0) ||
- !bacmp(&bda->bdaddr, BDADDR_BCM4324B3)) {
+ !bacmp(&bda->bdaddr, BDADDR_BCM4324B3) ||
+ !bacmp(&bda->bdaddr, BDADDR_BCM4330B1)) {
BT_INFO("%s: BCM: Using default device address (%pMR)",
hdev->name, &bda->bdaddr);
set_bit(HCI_QUIRK_INVALID_BDADDR, &hdev->quirks);
@@ -241,6 +246,7 @@ static const struct {
u16 subver;
const char *name;
} bcm_uart_subver_table[] = {
+ { 0x4103, "BCM4330B1" }, /* 002.001.003 */
{ 0x410e, "BCM43341B0" }, /* 002.001.014 */
{ 0x4406, "BCM4324B3" }, /* 002.004.006 */
{ 0x610c, "BCM4354" }, /* 003.001.012 */
diff --git a/drivers/bluetooth/btintel.c b/drivers/bluetooth/btintel.c
index 828f2f8d1..ddec437f8 100644
--- a/drivers/bluetooth/btintel.c
+++ b/drivers/bluetooth/btintel.c
@@ -89,7 +89,88 @@ int btintel_set_bdaddr(struct hci_dev *hdev, const bdaddr_t *bdaddr)
}
EXPORT_SYMBOL_GPL(btintel_set_bdaddr);
+void btintel_hw_error(struct hci_dev *hdev, u8 code)
+{
+ struct sk_buff *skb;
+ u8 type = 0x00;
+
+ BT_ERR("%s: Hardware error 0x%2.2x", hdev->name, code);
+
+ skb = __hci_cmd_sync(hdev, HCI_OP_RESET, 0, NULL, HCI_INIT_TIMEOUT);
+ if (IS_ERR(skb)) {
+ BT_ERR("%s: Reset after hardware error failed (%ld)",
+ hdev->name, PTR_ERR(skb));
+ return;
+ }
+ kfree_skb(skb);
+
+ skb = __hci_cmd_sync(hdev, 0xfc22, 1, &type, HCI_INIT_TIMEOUT);
+ if (IS_ERR(skb)) {
+ BT_ERR("%s: Retrieving Intel exception info failed (%ld)",
+ hdev->name, PTR_ERR(skb));
+ return;
+ }
+
+ if (skb->len != 13) {
+ BT_ERR("%s: Exception info size mismatch", hdev->name);
+ kfree_skb(skb);
+ return;
+ }
+
+ BT_ERR("%s: Exception info %s", hdev->name, (char *)(skb->data + 1));
+
+ kfree_skb(skb);
+}
+EXPORT_SYMBOL_GPL(btintel_hw_error);
+
+void btintel_version_info(struct hci_dev *hdev, struct intel_version *ver)
+{
+ const char *variant;
+
+ switch (ver->fw_variant) {
+ case 0x06:
+ variant = "Bootloader";
+ break;
+ case 0x23:
+ variant = "Firmware";
+ break;
+ default:
+ return;
+ }
+
+ BT_INFO("%s: %s revision %u.%u build %u week %u %u", hdev->name,
+ variant, ver->fw_revision >> 4, ver->fw_revision & 0x0f,
+ ver->fw_build_num, ver->fw_build_ww, 2000 + ver->fw_build_yy);
+}
+EXPORT_SYMBOL_GPL(btintel_version_info);
+
+int btintel_secure_send(struct hci_dev *hdev, u8 fragment_type, u32 plen,
+ const void *param)
+{
+ while (plen > 0) {
+ struct sk_buff *skb;
+ u8 cmd_param[253], fragment_len = (plen > 252) ? 252 : plen;
+
+ cmd_param[0] = fragment_type;
+ memcpy(cmd_param + 1, param, fragment_len);
+
+ skb = __hci_cmd_sync(hdev, 0xfc09, fragment_len + 1,
+ cmd_param, HCI_INIT_TIMEOUT);
+ if (IS_ERR(skb))
+ return PTR_ERR(skb);
+
+ kfree_skb(skb);
+
+ plen -= fragment_len;
+ param += fragment_len;
+ }
+
+ return 0;
+}
+EXPORT_SYMBOL_GPL(btintel_secure_send);
+
MODULE_AUTHOR("Marcel Holtmann <marcel@holtmann.org>");
MODULE_DESCRIPTION("Bluetooth support for Intel devices ver " VERSION);
MODULE_VERSION(VERSION);
MODULE_LICENSE("GPL");
+/*(DEBLOBBED)*/
diff --git a/drivers/bluetooth/btintel.h b/drivers/bluetooth/btintel.h
index 4bda6ab34..b278d1475 100644
--- a/drivers/bluetooth/btintel.h
+++ b/drivers/bluetooth/btintel.h
@@ -73,6 +73,11 @@ struct intel_secure_send_result {
int btintel_check_bdaddr(struct hci_dev *hdev);
int btintel_set_bdaddr(struct hci_dev *hdev, const bdaddr_t *bdaddr);
+void btintel_hw_error(struct hci_dev *hdev, u8 code);
+
+void btintel_version_info(struct hci_dev *hdev, struct intel_version *ver);
+int btintel_secure_send(struct hci_dev *hdev, u8 fragment_type, u32 plen,
+ const void *param);
#else
@@ -86,4 +91,18 @@ static inline int btintel_set_bdaddr(struct hci_dev *hdev, const bdaddr_t *bdadd
return -EOPNOTSUPP;
}
+static inline void btintel_hw_error(struct hci_dev *hdev, u8 code)
+{
+}
+
+static void btintel_version_info(struct hci_dev *hdev, struct intel_version *ver)
+{
+}
+
+static inline int btintel_secure_send(struct hci_dev *hdev, u8 fragment_type,
+ u32 plen, const void *param)
+{
+ return -EOPNOTSUPP;
+}
+
#endif
diff --git a/drivers/bluetooth/btmrvl_drv.h b/drivers/bluetooth/btmrvl_drv.h
index 086f0ec89..27a9aac25 100644
--- a/drivers/bluetooth/btmrvl_drv.h
+++ b/drivers/bluetooth/btmrvl_drv.h
@@ -95,10 +95,10 @@ struct btmrvl_private {
struct btmrvl_device btmrvl_dev;
struct btmrvl_adapter *adapter;
struct btmrvl_thread main_thread;
- int (*hw_host_to_card) (struct btmrvl_private *priv,
+ int (*hw_host_to_card)(struct btmrvl_private *priv,
u8 *payload, u16 nb);
- int (*hw_wakeup_firmware) (struct btmrvl_private *priv);
- int (*hw_process_int_status) (struct btmrvl_private *priv);
+ int (*hw_wakeup_firmware)(struct btmrvl_private *priv);
+ int (*hw_process_int_status)(struct btmrvl_private *priv);
void (*firmware_dump)(struct btmrvl_private *priv);
spinlock_t driver_lock; /* spinlock used by driver */
#ifdef CONFIG_DEBUG_FS
diff --git a/drivers/bluetooth/btmrvl_sdio.c b/drivers/bluetooth/btmrvl_sdio.c
index ac1a43687..40c1aacb4 100644
--- a/drivers/bluetooth/btmrvl_sdio.c
+++ b/drivers/bluetooth/btmrvl_sdio.c
@@ -1071,8 +1071,6 @@ static int btmrvl_sdio_download_fw(struct btmrvl_sdio_card *card)
}
}
- sdio_release_host(card->func);
-
/*
* winner or not, with this test the FW synchronizes when the
* module can continue its initialization
@@ -1082,6 +1080,8 @@ static int btmrvl_sdio_download_fw(struct btmrvl_sdio_card *card)
return -ETIMEDOUT;
}
+ sdio_release_host(card->func);
+
return 0;
done:
@@ -1376,8 +1376,7 @@ done:
/* fw_dump_data will be free in device coredump release function
after 5 min*/
- dev_coredumpv(&priv->btmrvl_dev.hcidev->dev, fw_dump_data,
- fw_dump_len, GFP_KERNEL);
+ dev_coredumpv(&card->func->dev, fw_dump_data, fw_dump_len, GFP_KERNEL);
BT_INFO("== btmrvl firmware dump to /sys/class/devcoredump end");
}
diff --git a/drivers/bluetooth/btqca.c b/drivers/bluetooth/btqca.c
new file mode 100644
index 000000000..eadbcd138
--- /dev/null
+++ b/drivers/bluetooth/btqca.c
@@ -0,0 +1,392 @@
+/*
+ * Bluetooth supports for Qualcomm Atheros chips
+ *
+ * Copyright (c) 2015 The Linux Foundation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2
+ * as published by the Free Software Foundation
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ *
+ */
+#include <linux/module.h>
+#include <linux/firmware.h>
+
+#include <net/bluetooth/bluetooth.h>
+#include <net/bluetooth/hci_core.h>
+
+#include "btqca.h"
+
+#define VERSION "0.1"
+
+static int rome_patch_ver_req(struct hci_dev *hdev, u32 *rome_version)
+{
+ struct sk_buff *skb;
+ struct edl_event_hdr *edl;
+ struct rome_version *ver;
+ char cmd;
+ int err = 0;
+
+ BT_DBG("%s: ROME Patch Version Request", hdev->name);
+
+ cmd = EDL_PATCH_VER_REQ_CMD;
+ skb = __hci_cmd_sync_ev(hdev, EDL_PATCH_CMD_OPCODE, EDL_PATCH_CMD_LEN,
+ &cmd, HCI_VENDOR_PKT, HCI_INIT_TIMEOUT);
+ if (IS_ERR(skb)) {
+ err = PTR_ERR(skb);
+ BT_ERR("%s: Failed to read version of ROME (%d)", hdev->name,
+ err);
+ return err;
+ }
+
+ if (skb->len != sizeof(*edl) + sizeof(*ver)) {
+ BT_ERR("%s: Version size mismatch len %d", hdev->name,
+ skb->len);
+ err = -EILSEQ;
+ goto out;
+ }
+
+ edl = (struct edl_event_hdr *)(skb->data);
+ if (!edl || !edl->data) {
+ BT_ERR("%s: TLV with no header or no data", hdev->name);
+ err = -EILSEQ;
+ goto out;
+ }
+
+ if (edl->cresp != EDL_CMD_REQ_RES_EVT ||
+ edl->rtype != EDL_APP_VER_RES_EVT) {
+ BT_ERR("%s: Wrong packet received %d %d", hdev->name,
+ edl->cresp, edl->rtype);
+ err = -EIO;
+ goto out;
+ }
+
+ ver = (struct rome_version *)(edl->data);
+
+ BT_DBG("%s: Product:0x%08x", hdev->name, le32_to_cpu(ver->product_id));
+ BT_DBG("%s: Patch :0x%08x", hdev->name, le16_to_cpu(ver->patch_ver));
+ BT_DBG("%s: ROM :0x%08x", hdev->name, le16_to_cpu(ver->rome_ver));
+ BT_DBG("%s: SOC :0x%08x", hdev->name, le32_to_cpu(ver->soc_id));
+
+ /* ROME chipset version can be decided by patch and SoC
+ * version, combination with upper 2 bytes from SoC
+ * and lower 2 bytes from patch will be used.
+ */
+ *rome_version = (le32_to_cpu(ver->soc_id) << 16) |
+ (le16_to_cpu(ver->rome_ver) & 0x0000ffff);
+
+out:
+ kfree_skb(skb);
+
+ return err;
+}
+
+static int rome_reset(struct hci_dev *hdev)
+{
+ struct sk_buff *skb;
+ int err;
+
+ BT_DBG("%s: ROME HCI_RESET", hdev->name);
+
+ skb = __hci_cmd_sync(hdev, HCI_OP_RESET, 0, NULL, HCI_INIT_TIMEOUT);
+ if (IS_ERR(skb)) {
+ err = PTR_ERR(skb);
+ BT_ERR("%s: Reset failed (%d)", hdev->name, err);
+ return err;
+ }
+
+ kfree_skb(skb);
+
+ return 0;
+}
+
+static void rome_tlv_check_data(struct rome_config *config,
+ const struct firmware *fw)
+{
+ const u8 *data;
+ u32 type_len;
+ u16 tag_id, tag_len;
+ int idx, length;
+ struct tlv_type_hdr *tlv;
+ struct tlv_type_patch *tlv_patch;
+ struct tlv_type_nvm *tlv_nvm;
+
+ tlv = (struct tlv_type_hdr *)fw->data;
+
+ type_len = le32_to_cpu(tlv->type_len);
+ length = (type_len >> 8) & 0x00ffffff;
+
+ BT_DBG("TLV Type\t\t : 0x%x", type_len & 0x000000ff);
+ BT_DBG("Length\t\t : %d bytes", length);
+
+ switch (config->type) {
+ case TLV_TYPE_PATCH:
+ tlv_patch = (struct tlv_type_patch *)tlv->data;
+ BT_DBG("Total Length\t\t : %d bytes",
+ le32_to_cpu(tlv_patch->total_size));
+ BT_DBG("Patch Data Length\t : %d bytes",
+ le32_to_cpu(tlv_patch->data_length));
+ BT_DBG("Signing Format Version : 0x%x",
+ tlv_patch->format_version);
+ BT_DBG("Signature Algorithm\t : 0x%x",
+ tlv_patch->signature);
+ BT_DBG("Reserved\t\t : 0x%x",
+ le16_to_cpu(tlv_patch->reserved1));
+ BT_DBG("Product ID\t\t : 0x%04x",
+ le16_to_cpu(tlv_patch->product_id));
+ BT_DBG("Rom Build Version\t : 0x%04x",
+ le16_to_cpu(tlv_patch->rom_build));
+ BT_DBG("Patch Version\t\t : 0x%04x",
+ le16_to_cpu(tlv_patch->patch_version));
+ BT_DBG("Reserved\t\t : 0x%x",
+ le16_to_cpu(tlv_patch->reserved2));
+ BT_DBG("Patch Entry Address\t : 0x%x",
+ le32_to_cpu(tlv_patch->entry));
+ break;
+
+ case TLV_TYPE_NVM:
+ idx = 0;
+ data = tlv->data;
+ while (idx < length) {
+ tlv_nvm = (struct tlv_type_nvm *)(data + idx);
+
+ tag_id = le16_to_cpu(tlv_nvm->tag_id);
+ tag_len = le16_to_cpu(tlv_nvm->tag_len);
+
+ /* Update NVM tags as needed */
+ switch (tag_id) {
+ case EDL_TAG_ID_HCI:
+ /* HCI transport layer parameters
+ * enabling software inband sleep
+ * onto controller side.
+ */
+ tlv_nvm->data[0] |= 0x80;
+
+ /* UART Baud Rate */
+ tlv_nvm->data[2] = config->user_baud_rate;
+
+ break;
+
+ case EDL_TAG_ID_DEEP_SLEEP:
+ /* Sleep enable mask
+ * enabling deep sleep feature on controller.
+ */
+ tlv_nvm->data[0] |= 0x01;
+
+ break;
+ }
+
+ idx += (sizeof(u16) + sizeof(u16) + 8 + tag_len);
+ }
+ break;
+
+ default:
+ BT_ERR("Unknown TLV type %d", config->type);
+ break;
+ }
+}
+
+static int rome_tlv_send_segment(struct hci_dev *hdev, int idx, int seg_size,
+ const u8 *data)
+{
+ struct sk_buff *skb;
+ struct edl_event_hdr *edl;
+ struct tlv_seg_resp *tlv_resp;
+ u8 cmd[MAX_SIZE_PER_TLV_SEGMENT + 2];
+ int err = 0;
+
+ BT_DBG("%s: Download segment #%d size %d", hdev->name, idx, seg_size);
+
+ cmd[0] = EDL_PATCH_TLV_REQ_CMD;
+ cmd[1] = seg_size;
+ memcpy(cmd + 2, data, seg_size);
+
+ skb = __hci_cmd_sync_ev(hdev, EDL_PATCH_CMD_OPCODE, seg_size + 2, cmd,
+ HCI_VENDOR_PKT, HCI_INIT_TIMEOUT);
+ if (IS_ERR(skb)) {
+ err = PTR_ERR(skb);
+ BT_ERR("%s: Failed to send TLV segment (%d)", hdev->name, err);
+ return err;
+ }
+
+ if (skb->len != sizeof(*edl) + sizeof(*tlv_resp)) {
+ BT_ERR("%s: TLV response size mismatch", hdev->name);
+ err = -EILSEQ;
+ goto out;
+ }
+
+ edl = (struct edl_event_hdr *)(skb->data);
+ if (!edl || !edl->data) {
+ BT_ERR("%s: TLV with no header or no data", hdev->name);
+ err = -EILSEQ;
+ goto out;
+ }
+
+ tlv_resp = (struct tlv_seg_resp *)(edl->data);
+
+ if (edl->cresp != EDL_CMD_REQ_RES_EVT ||
+ edl->rtype != EDL_TVL_DNLD_RES_EVT || tlv_resp->result != 0x00) {
+ BT_ERR("%s: TLV with error stat 0x%x rtype 0x%x (0x%x)",
+ hdev->name, edl->cresp, edl->rtype, tlv_resp->result);
+ err = -EIO;
+ }
+
+out:
+ kfree_skb(skb);
+
+ return err;
+}
+
+static int rome_tlv_download_request(struct hci_dev *hdev,
+ const struct firmware *fw)
+{
+ const u8 *buffer, *data;
+ int total_segment, remain_size;
+ int ret, i;
+
+ if (!fw || !fw->data)
+ return -EINVAL;
+
+ total_segment = fw->size / MAX_SIZE_PER_TLV_SEGMENT;
+ remain_size = fw->size % MAX_SIZE_PER_TLV_SEGMENT;
+
+ BT_DBG("%s: Total segment num %d remain size %d total size %zu",
+ hdev->name, total_segment, remain_size, fw->size);
+
+ data = fw->data;
+ for (i = 0; i < total_segment; i++) {
+ buffer = data + i * MAX_SIZE_PER_TLV_SEGMENT;
+ ret = rome_tlv_send_segment(hdev, i, MAX_SIZE_PER_TLV_SEGMENT,
+ buffer);
+ if (ret < 0)
+ return -EIO;
+ }
+
+ if (remain_size) {
+ buffer = data + total_segment * MAX_SIZE_PER_TLV_SEGMENT;
+ ret = rome_tlv_send_segment(hdev, total_segment, remain_size,
+ buffer);
+ if (ret < 0)
+ return -EIO;
+ }
+
+ return 0;
+}
+
+static int rome_download_firmware(struct hci_dev *hdev,
+ struct rome_config *config)
+{
+ const struct firmware *fw;
+ int ret;
+
+ BT_INFO("%s: ROME Downloading %s", hdev->name, config->fwname);
+
+ ret = reject_firmware(&fw, config->fwname, &hdev->dev);
+ if (ret) {
+ BT_ERR("%s: Failed to request file: %s (%d)", hdev->name,
+ config->fwname, ret);
+ return ret;
+ }
+
+ rome_tlv_check_data(config, fw);
+
+ ret = rome_tlv_download_request(hdev, fw);
+ if (ret) {
+ BT_ERR("%s: Failed to download file: %s (%d)", hdev->name,
+ config->fwname, ret);
+ }
+
+ release_firmware(fw);
+
+ return ret;
+}
+
+int qca_set_bdaddr_rome(struct hci_dev *hdev, const bdaddr_t *bdaddr)
+{
+ struct sk_buff *skb;
+ u8 cmd[9];
+ int err;
+
+ cmd[0] = EDL_NVM_ACCESS_SET_REQ_CMD;
+ cmd[1] = 0x02; /* TAG ID */
+ cmd[2] = sizeof(bdaddr_t); /* size */
+ memcpy(cmd + 3, bdaddr, sizeof(bdaddr_t));
+ skb = __hci_cmd_sync_ev(hdev, EDL_NVM_ACCESS_OPCODE, sizeof(cmd), cmd,
+ HCI_VENDOR_PKT, HCI_INIT_TIMEOUT);
+ if (IS_ERR(skb)) {
+ err = PTR_ERR(skb);
+ BT_ERR("%s: Change address command failed (%d)",
+ hdev->name, err);
+ return err;
+ }
+
+ kfree_skb(skb);
+
+ return 0;
+}
+EXPORT_SYMBOL_GPL(qca_set_bdaddr_rome);
+
+int qca_uart_setup_rome(struct hci_dev *hdev, uint8_t baudrate)
+{
+ u32 rome_ver = 0;
+ struct rome_config config;
+ int err;
+
+ BT_DBG("%s: ROME setup on UART", hdev->name);
+
+ config.user_baud_rate = baudrate;
+
+ /* Get ROME version information */
+ err = rome_patch_ver_req(hdev, &rome_ver);
+ if (err < 0 || rome_ver == 0) {
+ BT_ERR("%s: Failed to get version 0x%x", hdev->name, err);
+ return err;
+ }
+
+ BT_INFO("%s: ROME controller version 0x%08x", hdev->name, rome_ver);
+
+ /* Download rampatch file */
+ config.type = TLV_TYPE_PATCH;
+ snprintf(config.fwname, sizeof(config.fwname), "/*(DEBLOBBED)*/",
+ rome_ver);
+ err = rome_download_firmware(hdev, &config);
+ if (err < 0) {
+ BT_ERR("%s: Failed to download patch (%d)", hdev->name, err);
+ return err;
+ }
+
+ /* Download NVM configuration */
+ config.type = TLV_TYPE_NVM;
+ snprintf(config.fwname, sizeof(config.fwname), "/*(DEBLOBBED)*/",
+ rome_ver);
+ err = rome_download_firmware(hdev, &config);
+ if (err < 0) {
+ BT_ERR("%s: Failed to download NVM (%d)", hdev->name, err);
+ return err;
+ }
+
+ /* Perform HCI reset */
+ err = rome_reset(hdev);
+ if (err < 0) {
+ BT_ERR("%s: Failed to run HCI_RESET (%d)", hdev->name, err);
+ return err;
+ }
+
+ BT_INFO("%s: ROME setup on UART is completed", hdev->name);
+
+ return 0;
+}
+EXPORT_SYMBOL_GPL(qca_uart_setup_rome);
+
+MODULE_AUTHOR("Ben Young Tae Kim <ytkim@qca.qualcomm.com>");
+MODULE_DESCRIPTION("Bluetooth support for Qualcomm Atheros family ver " VERSION);
+MODULE_VERSION(VERSION);
+MODULE_LICENSE("GPL");
diff --git a/drivers/bluetooth/btqca.h b/drivers/bluetooth/btqca.h
new file mode 100644
index 000000000..65e994b96
--- /dev/null
+++ b/drivers/bluetooth/btqca.h
@@ -0,0 +1,135 @@
+/*
+ * Bluetooth supports for Qualcomm Atheros ROME chips
+ *
+ * Copyright (c) 2015 The Linux Foundation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2
+ * as published by the Free Software Foundation
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ *
+ */
+
+#define EDL_PATCH_CMD_OPCODE (0xFC00)
+#define EDL_NVM_ACCESS_OPCODE (0xFC0B)
+#define EDL_PATCH_CMD_LEN (1)
+#define EDL_PATCH_VER_REQ_CMD (0x19)
+#define EDL_PATCH_TLV_REQ_CMD (0x1E)
+#define EDL_NVM_ACCESS_SET_REQ_CMD (0x01)
+#define MAX_SIZE_PER_TLV_SEGMENT (243)
+
+#define EDL_CMD_REQ_RES_EVT (0x00)
+#define EDL_PATCH_VER_RES_EVT (0x19)
+#define EDL_APP_VER_RES_EVT (0x02)
+#define EDL_TVL_DNLD_RES_EVT (0x04)
+#define EDL_CMD_EXE_STATUS_EVT (0x00)
+#define EDL_SET_BAUDRATE_RSP_EVT (0x92)
+#define EDL_NVM_ACCESS_CODE_EVT (0x0B)
+
+#define EDL_TAG_ID_HCI (17)
+#define EDL_TAG_ID_DEEP_SLEEP (27)
+
+enum qca_bardrate {
+ QCA_BAUDRATE_115200 = 0,
+ QCA_BAUDRATE_57600,
+ QCA_BAUDRATE_38400,
+ QCA_BAUDRATE_19200,
+ QCA_BAUDRATE_9600,
+ QCA_BAUDRATE_230400,
+ QCA_BAUDRATE_250000,
+ QCA_BAUDRATE_460800,
+ QCA_BAUDRATE_500000,
+ QCA_BAUDRATE_720000,
+ QCA_BAUDRATE_921600,
+ QCA_BAUDRATE_1000000,
+ QCA_BAUDRATE_1250000,
+ QCA_BAUDRATE_2000000,
+ QCA_BAUDRATE_3000000,
+ QCA_BAUDRATE_4000000,
+ QCA_BAUDRATE_1600000,
+ QCA_BAUDRATE_3200000,
+ QCA_BAUDRATE_3500000,
+ QCA_BAUDRATE_AUTO = 0xFE,
+ QCA_BAUDRATE_RESERVED
+};
+
+enum rome_tlv_type {
+ TLV_TYPE_PATCH = 1,
+ TLV_TYPE_NVM
+};
+
+struct rome_config {
+ u8 type;
+ char fwname[64];
+ uint8_t user_baud_rate;
+};
+
+struct edl_event_hdr {
+ __u8 cresp;
+ __u8 rtype;
+ __u8 data[0];
+} __packed;
+
+struct rome_version {
+ __le32 product_id;
+ __le16 patch_ver;
+ __le16 rome_ver;
+ __le32 soc_id;
+} __packed;
+
+struct tlv_seg_resp {
+ __u8 result;
+} __packed;
+
+struct tlv_type_patch {
+ __le32 total_size;
+ __le32 data_length;
+ __u8 format_version;
+ __u8 signature;
+ __le16 reserved1;
+ __le16 product_id;
+ __le16 rom_build;
+ __le16 patch_version;
+ __le16 reserved2;
+ __le32 entry;
+} __packed;
+
+struct tlv_type_nvm {
+ __le16 tag_id;
+ __le16 tag_len;
+ __le32 reserve1;
+ __le32 reserve2;
+ __u8 data[0];
+} __packed;
+
+struct tlv_type_hdr {
+ __le32 type_len;
+ __u8 data[0];
+} __packed;
+
+#if IS_ENABLED(CONFIG_BT_QCA)
+
+int qca_set_bdaddr_rome(struct hci_dev *hdev, const bdaddr_t *bdaddr);
+int qca_uart_setup_rome(struct hci_dev *hdev, uint8_t baudrate);
+
+#else
+
+static inline int qca_set_bdaddr_rome(struct hci_dev *hdev, const bdaddr_t *bdaddr)
+{
+ return -EOPNOTSUPP;
+}
+
+static inline int qca_uart_setup_rome(struct hci_dev *hdev, int speed)
+{
+ return -EOPNOTSUPP;
+}
+
+#endif
diff --git a/drivers/bluetooth/btusb.c b/drivers/bluetooth/btusb.c
index 5771183a7..6d8c1e7ca 100644
--- a/drivers/bluetooth/btusb.c
+++ b/drivers/bluetooth/btusb.c
@@ -68,6 +68,9 @@ static const struct usb_device_id btusb_table[] = {
/* Generic Bluetooth AMP device */
{ USB_DEVICE_INFO(0xe0, 0x01, 0x04), .driver_info = BTUSB_AMP },
+ /* Generic Bluetooth USB interface */
+ { USB_INTERFACE_INFO(0xe0, 0x01, 0x01) },
+
/* Apple-specific (Broadcom) devices */
{ USB_VENDOR_AND_INTERFACE_INFO(0x05ac, 0xff, 0x01, 0x01),
.driver_info = BTUSB_BCM_APPLE },
@@ -192,6 +195,7 @@ static const struct usb_device_id blacklist_table[] = {
{ USB_DEVICE(0x04ca, 0x300f), .driver_info = BTUSB_ATH3012 },
{ USB_DEVICE(0x04ca, 0x3010), .driver_info = BTUSB_ATH3012 },
{ USB_DEVICE(0x0930, 0x0219), .driver_info = BTUSB_ATH3012 },
+ { USB_DEVICE(0x0930, 0x021c), .driver_info = BTUSB_ATH3012 },
{ USB_DEVICE(0x0930, 0x0220), .driver_info = BTUSB_ATH3012 },
{ USB_DEVICE(0x0930, 0x0227), .driver_info = BTUSB_ATH3012 },
{ USB_DEVICE(0x0b05, 0x17d0), .driver_info = BTUSB_ATH3012 },
@@ -203,6 +207,7 @@ static const struct usb_device_id blacklist_table[] = {
{ USB_DEVICE(0x0cf3, 0x311f), .driver_info = BTUSB_ATH3012 },
{ USB_DEVICE(0x0cf3, 0x3121), .driver_info = BTUSB_ATH3012 },
{ USB_DEVICE(0x0cf3, 0x817a), .driver_info = BTUSB_ATH3012 },
+ { USB_DEVICE(0x0cf3, 0x817b), .driver_info = BTUSB_ATH3012 },
{ USB_DEVICE(0x0cf3, 0xe003), .driver_info = BTUSB_ATH3012 },
{ USB_DEVICE(0x0cf3, 0xe004), .driver_info = BTUSB_ATH3012 },
{ USB_DEVICE(0x0cf3, 0xe005), .driver_info = BTUSB_ATH3012 },
@@ -319,6 +324,9 @@ static const struct usb_device_id blacklist_table[] = {
{ USB_DEVICE(0x13d3, 0x3461), .driver_info = BTUSB_REALTEK },
{ USB_DEVICE(0x13d3, 0x3462), .driver_info = BTUSB_REALTEK },
+ /* Silicon Wave based devices */
+ { USB_DEVICE(0x0c10, 0x0000), .driver_info = BTUSB_SWAVE },
+
{ } /* Terminating entry */
};
@@ -1575,7 +1583,7 @@ static int btusb_setup_intel(struct hci_dev *hdev)
/* fw_patch_num indicates the version of patch the device currently
* have. If there is no patch data in the device, it is always 0x00.
- * So, if it is other than 0x00, no need to patch the deivce again.
+ * So, if it is other than 0x00, no need to patch the device again.
*/
if (ver->fw_patch_num) {
BT_INFO("%s: Intel device is already patched. patch num: %02x",
@@ -1878,51 +1886,6 @@ static int btusb_send_frame_intel(struct hci_dev *hdev, struct sk_buff *skb)
return -EILSEQ;
}
-static int btusb_intel_secure_send(struct hci_dev *hdev, u8 fragment_type,
- u32 plen, const void *param)
-{
- while (plen > 0) {
- struct sk_buff *skb;
- u8 cmd_param[253], fragment_len = (plen > 252) ? 252 : plen;
-
- cmd_param[0] = fragment_type;
- memcpy(cmd_param + 1, param, fragment_len);
-
- skb = __hci_cmd_sync(hdev, 0xfc09, fragment_len + 1,
- cmd_param, HCI_INIT_TIMEOUT);
- if (IS_ERR(skb))
- return PTR_ERR(skb);
-
- kfree_skb(skb);
-
- plen -= fragment_len;
- param += fragment_len;
- }
-
- return 0;
-}
-
-static void btusb_intel_version_info(struct hci_dev *hdev,
- struct intel_version *ver)
-{
- const char *variant;
-
- switch (ver->fw_variant) {
- case 0x06:
- variant = "Bootloader";
- break;
- case 0x23:
- variant = "Firmware";
- break;
- default:
- return;
- }
-
- BT_INFO("%s: %s revision %u.%u build %u week %u %u", hdev->name,
- variant, ver->fw_revision >> 4, ver->fw_revision & 0x0f,
- ver->fw_build_num, ver->fw_build_ww, 2000 + ver->fw_build_yy);
-}
-
static int btusb_setup_intel_new(struct hci_dev *hdev)
{
static const u8 reset_param[] = { 0x00, 0x01, 0x00, 0x01,
@@ -1984,7 +1947,7 @@ static int btusb_setup_intel_new(struct hci_dev *hdev)
return -EINVAL;
}
- btusb_intel_version_info(hdev, ver);
+ btintel_version_info(hdev, ver);
/* The firmware variant determines if the device is in bootloader
* mode or is running operational firmware. The value 0x06 identifies
@@ -2104,7 +2067,7 @@ static int btusb_setup_intel_new(struct hci_dev *hdev)
/* Start the firmware download transaction with the Init fragment
* represented by the 128 bytes of CSS header.
*/
- err = btusb_intel_secure_send(hdev, 0x00, 128, fw->data);
+ err = btintel_secure_send(hdev, 0x00, 128, fw->data);
if (err < 0) {
BT_ERR("%s: Failed to send firmware header (%d)",
hdev->name, err);
@@ -2114,7 +2077,7 @@ static int btusb_setup_intel_new(struct hci_dev *hdev)
/* Send the 256 bytes of public key information from the firmware
* as the PKey fragment.
*/
- err = btusb_intel_secure_send(hdev, 0x03, 256, fw->data + 128);
+ err = btintel_secure_send(hdev, 0x03, 256, fw->data + 128);
if (err < 0) {
BT_ERR("%s: Failed to send firmware public key (%d)",
hdev->name, err);
@@ -2124,7 +2087,7 @@ static int btusb_setup_intel_new(struct hci_dev *hdev)
/* Send the 256 bytes of signature information from the firmware
* as the Sign fragment.
*/
- err = btusb_intel_secure_send(hdev, 0x02, 256, fw->data + 388);
+ err = btintel_secure_send(hdev, 0x02, 256, fw->data + 388);
if (err < 0) {
BT_ERR("%s: Failed to send firmware signature (%d)",
hdev->name, err);
@@ -2139,7 +2102,7 @@ static int btusb_setup_intel_new(struct hci_dev *hdev)
frag_len += sizeof(*cmd) + cmd->plen;
- /* The paramter length of the secure send command requires
+ /* The parameter length of the secure send command requires
* a 4 byte alignment. It happens so that the firmware file
* contains proper Intel_NOP commands to align the fragments
* as needed.
@@ -2148,8 +2111,7 @@ static int btusb_setup_intel_new(struct hci_dev *hdev)
* firmware data buffer as a single Data fragement.
*/
if (!(frag_len % 4)) {
- err = btusb_intel_secure_send(hdev, 0x01, frag_len,
- fw_ptr);
+ err = btintel_secure_send(hdev, 0x01, frag_len, fw_ptr);
if (err < 0) {
BT_ERR("%s: Failed to send firmware data (%d)",
hdev->name, err);
@@ -2291,39 +2253,6 @@ done:
return 0;
}
-static void btusb_hw_error_intel(struct hci_dev *hdev, u8 code)
-{
- struct sk_buff *skb;
- u8 type = 0x00;
-
- BT_ERR("%s: Hardware error 0x%2.2x", hdev->name, code);
-
- skb = __hci_cmd_sync(hdev, HCI_OP_RESET, 0, NULL, HCI_INIT_TIMEOUT);
- if (IS_ERR(skb)) {
- BT_ERR("%s: Reset after hardware error failed (%ld)",
- hdev->name, PTR_ERR(skb));
- return;
- }
- kfree_skb(skb);
-
- skb = __hci_cmd_sync(hdev, 0xfc22, 1, &type, HCI_INIT_TIMEOUT);
- if (IS_ERR(skb)) {
- BT_ERR("%s: Retrieving Intel exception info failed (%ld)",
- hdev->name, PTR_ERR(skb));
- return;
- }
-
- if (skb->len != 13) {
- BT_ERR("%s: Exception info size mismatch", hdev->name);
- kfree_skb(skb);
- return;
- }
-
- BT_ERR("%s: Exception info %s", hdev->name, (char *)(skb->data + 1));
-
- kfree_skb(skb);
-}
-
static int btusb_shutdown_intel(struct hci_dev *hdev)
{
struct sk_buff *skb;
@@ -2783,7 +2712,7 @@ static int btusb_probe(struct usb_interface *intf,
if (id->driver_info & BTUSB_INTEL_NEW) {
hdev->send = btusb_send_frame_intel;
hdev->setup = btusb_setup_intel_new;
- hdev->hw_error = btusb_hw_error_intel;
+ hdev->hw_error = btintel_hw_error;
hdev->set_bdaddr = btintel_set_bdaddr;
set_bit(HCI_QUIRK_STRICT_DUPLICATE_FILTER, &hdev->quirks);
}
diff --git a/drivers/bluetooth/dtl1_cs.c b/drivers/bluetooth/dtl1_cs.c
index 78e10f0c6..84135c54e 100644
--- a/drivers/bluetooth/dtl1_cs.c
+++ b/drivers/bluetooth/dtl1_cs.c
@@ -182,9 +182,9 @@ static void dtl1_control(struct dtl1_info *info, struct sk_buff *skb)
int i;
printk(KERN_INFO "Bluetooth: Nokia control data =");
- for (i = 0; i < skb->len; i++) {
+ for (i = 0; i < skb->len; i++)
printk(" %02x", skb->data[i]);
- }
+
printk("\n");
/* transition to active state */
@@ -406,7 +406,7 @@ static int dtl1_hci_send_frame(struct hci_dev *hdev, struct sk_buff *skb)
break;
default:
return -EILSEQ;
- };
+ }
nsh.zero = 0;
nsh.len = skb->len;
diff --git a/drivers/bluetooth/hci_bcm.c b/drivers/bluetooth/hci_bcm.c
index 58d619492..de00082b8 100644
--- a/drivers/bluetooth/hci_bcm.c
+++ b/drivers/bluetooth/hci_bcm.c
@@ -25,6 +25,12 @@
#include <linux/errno.h>
#include <linux/skbuff.h>
#include <linux/firmware.h>
+#include <linux/module.h>
+#include <linux/acpi.h>
+#include <linux/platform_device.h>
+#include <linux/clk.h>
+#include <linux/gpio/consumer.h>
+#include <linux/tty.h>
#include <net/bluetooth/bluetooth.h>
#include <net/bluetooth/hci_core.h>
@@ -32,11 +38,37 @@
#include "btbcm.h"
#include "hci_uart.h"
+struct bcm_device {
+ struct list_head list;
+
+ struct platform_device *pdev;
+
+ const char *name;
+ struct gpio_desc *device_wakeup;
+ struct gpio_desc *shutdown;
+
+ struct clk *clk;
+ bool clk_enabled;
+
+ u32 init_speed;
+
+#ifdef CONFIG_PM_SLEEP
+ struct hci_uart *hu;
+ bool is_suspended; /* suspend/resume flag */
+#endif
+};
+
struct bcm_data {
- struct sk_buff *rx_skb;
- struct sk_buff_head txq;
+ struct sk_buff *rx_skb;
+ struct sk_buff_head txq;
+
+ struct bcm_device *dev;
};
+/* List of BCM BT UART devices */
+static DEFINE_SPINLOCK(bcm_device_lock);
+static LIST_HEAD(bcm_device_list);
+
static int bcm_set_baudrate(struct hci_uart *hu, unsigned int speed)
{
struct hci_dev *hdev = hu->hdev;
@@ -86,9 +118,41 @@ static int bcm_set_baudrate(struct hci_uart *hu, unsigned int speed)
return 0;
}
+/* bcm_device_exists should be protected by bcm_device_lock */
+static bool bcm_device_exists(struct bcm_device *device)
+{
+ struct list_head *p;
+
+ list_for_each(p, &bcm_device_list) {
+ struct bcm_device *dev = list_entry(p, struct bcm_device, list);
+
+ if (device == dev)
+ return true;
+ }
+
+ return false;
+}
+
+static int bcm_gpio_set_power(struct bcm_device *dev, bool powered)
+{
+ if (powered && !IS_ERR(dev->clk) && !dev->clk_enabled)
+ clk_enable(dev->clk);
+
+ gpiod_set_value(dev->shutdown, powered);
+ gpiod_set_value(dev->device_wakeup, powered);
+
+ if (!powered && !IS_ERR(dev->clk) && dev->clk_enabled)
+ clk_disable(dev->clk);
+
+ dev->clk_enabled = powered;
+
+ return 0;
+}
+
static int bcm_open(struct hci_uart *hu)
{
struct bcm_data *bcm;
+ struct list_head *p;
BT_DBG("hu %p", hu);
@@ -99,6 +163,30 @@ static int bcm_open(struct hci_uart *hu)
skb_queue_head_init(&bcm->txq);
hu->priv = bcm;
+
+ spin_lock(&bcm_device_lock);
+ list_for_each(p, &bcm_device_list) {
+ struct bcm_device *dev = list_entry(p, struct bcm_device, list);
+
+ /* Retrieve saved bcm_device based on parent of the
+ * platform device (saved during device probe) and
+ * parent of tty device used by hci_uart
+ */
+ if (hu->tty->dev->parent == dev->pdev->dev.parent) {
+ bcm->dev = dev;
+ hu->init_speed = dev->init_speed;
+#ifdef CONFIG_PM_SLEEP
+ dev->hu = hu;
+#endif
+ break;
+ }
+ }
+
+ if (bcm->dev)
+ bcm_gpio_set_power(bcm->dev, true);
+
+ spin_unlock(&bcm_device_lock);
+
return 0;
}
@@ -108,6 +196,16 @@ static int bcm_close(struct hci_uart *hu)
BT_DBG("hu %p", hu);
+ /* Protect bcm->dev against removal of the device or driver */
+ spin_lock(&bcm_device_lock);
+ if (bcm_device_exists(bcm->dev)) {
+ bcm_gpio_set_power(bcm->dev, false);
+#ifdef CONFIG_PM_SLEEP
+ bcm->dev->hu = NULL;
+#endif
+ }
+ spin_unlock(&bcm_device_lock);
+
skb_queue_purge(&bcm->txq);
kfree_skb(bcm->rx_skb);
kfree(bcm);
@@ -232,6 +330,204 @@ static struct sk_buff *bcm_dequeue(struct hci_uart *hu)
return skb_dequeue(&bcm->txq);
}
+#ifdef CONFIG_PM_SLEEP
+/* Platform suspend callback */
+static int bcm_suspend(struct device *dev)
+{
+ struct bcm_device *bdev = platform_get_drvdata(to_platform_device(dev));
+
+ BT_DBG("suspend (%p): is_suspended %d", bdev, bdev->is_suspended);
+
+ spin_lock(&bcm_device_lock);
+
+ if (!bdev->hu)
+ goto unlock;
+
+ if (!bdev->is_suspended) {
+ hci_uart_set_flow_control(bdev->hu, true);
+
+ /* Once this callback returns, driver suspends BT via GPIO */
+ bdev->is_suspended = true;
+ }
+
+ /* Suspend the device */
+ if (bdev->device_wakeup) {
+ gpiod_set_value(bdev->device_wakeup, false);
+ BT_DBG("suspend, delaying 15 ms");
+ mdelay(15);
+ }
+
+unlock:
+ spin_unlock(&bcm_device_lock);
+
+ return 0;
+}
+
+/* Platform resume callback */
+static int bcm_resume(struct device *dev)
+{
+ struct bcm_device *bdev = platform_get_drvdata(to_platform_device(dev));
+
+ BT_DBG("resume (%p): is_suspended %d", bdev, bdev->is_suspended);
+
+ spin_lock(&bcm_device_lock);
+
+ if (!bdev->hu)
+ goto unlock;
+
+ if (bdev->device_wakeup) {
+ gpiod_set_value(bdev->device_wakeup, true);
+ BT_DBG("resume, delaying 15 ms");
+ mdelay(15);
+ }
+
+ /* When this callback executes, the device has woken up already */
+ if (bdev->is_suspended) {
+ bdev->is_suspended = false;
+
+ hci_uart_set_flow_control(bdev->hu, false);
+ }
+
+unlock:
+ spin_unlock(&bcm_device_lock);
+
+ return 0;
+}
+#endif
+
+static const struct acpi_gpio_params device_wakeup_gpios = { 0, 0, false };
+static const struct acpi_gpio_params shutdown_gpios = { 1, 0, false };
+
+static const struct acpi_gpio_mapping acpi_bcm_default_gpios[] = {
+ { "device-wakeup-gpios", &device_wakeup_gpios, 1 },
+ { "shutdown-gpios", &shutdown_gpios, 1 },
+ { },
+};
+
+#ifdef CONFIG_ACPI
+static int bcm_resource(struct acpi_resource *ares, void *data)
+{
+ struct bcm_device *dev = data;
+
+ if (ares->type == ACPI_RESOURCE_TYPE_SERIAL_BUS) {
+ struct acpi_resource_uart_serialbus *sb;
+
+ sb = &ares->data.uart_serial_bus;
+ if (sb->type == ACPI_RESOURCE_SERIAL_TYPE_UART)
+ dev->init_speed = sb->default_baud_rate;
+ }
+
+ /* Always tell the ACPI core to skip this resource */
+ return 1;
+}
+
+static int bcm_acpi_probe(struct bcm_device *dev)
+{
+ struct platform_device *pdev = dev->pdev;
+ const struct acpi_device_id *id;
+ struct acpi_device *adev;
+ LIST_HEAD(resources);
+ int ret;
+
+ id = acpi_match_device(pdev->dev.driver->acpi_match_table, &pdev->dev);
+ if (!id)
+ return -ENODEV;
+
+ /* Retrieve GPIO data */
+ dev->name = dev_name(&pdev->dev);
+ ret = acpi_dev_add_driver_gpios(ACPI_COMPANION(&pdev->dev),
+ acpi_bcm_default_gpios);
+ if (ret)
+ return ret;
+
+ dev->clk = devm_clk_get(&pdev->dev, NULL);
+
+ dev->device_wakeup = devm_gpiod_get_optional(&pdev->dev,
+ "device-wakeup",
+ GPIOD_OUT_LOW);
+ if (IS_ERR(dev->device_wakeup))
+ return PTR_ERR(dev->device_wakeup);
+
+ dev->shutdown = devm_gpiod_get_optional(&pdev->dev, "shutdown",
+ GPIOD_OUT_LOW);
+ if (IS_ERR(dev->shutdown))
+ return PTR_ERR(dev->shutdown);
+
+ /* Make sure at-least one of the GPIO is defined and that
+ * a name is specified for this instance
+ */
+ if ((!dev->device_wakeup && !dev->shutdown) || !dev->name) {
+ dev_err(&pdev->dev, "invalid platform data\n");
+ return -EINVAL;
+ }
+
+ /* Retrieve UART ACPI info */
+ adev = ACPI_COMPANION(&dev->pdev->dev);
+ if (!adev)
+ return 0;
+
+ acpi_dev_get_resources(adev, &resources, bcm_resource, dev);
+
+ return 0;
+}
+#else
+static int bcm_acpi_probe(struct bcm_device *dev)
+{
+ return -EINVAL;
+}
+#endif /* CONFIG_ACPI */
+
+static int bcm_probe(struct platform_device *pdev)
+{
+ struct bcm_device *dev;
+ struct acpi_device_id *pdata = pdev->dev.platform_data;
+ int ret;
+
+ dev = devm_kzalloc(&pdev->dev, sizeof(*dev), GFP_KERNEL);
+ if (!dev)
+ return -ENOMEM;
+
+ dev->pdev = pdev;
+
+ if (ACPI_HANDLE(&pdev->dev)) {
+ ret = bcm_acpi_probe(dev);
+ if (ret)
+ return ret;
+ } else if (pdata) {
+ dev->name = pdata->id;
+ } else {
+ return -ENODEV;
+ }
+
+ platform_set_drvdata(pdev, dev);
+
+ dev_info(&pdev->dev, "%s device registered.\n", dev->name);
+
+ /* Place this instance on the device list */
+ spin_lock(&bcm_device_lock);
+ list_add_tail(&dev->list, &bcm_device_list);
+ spin_unlock(&bcm_device_lock);
+
+ bcm_gpio_set_power(dev, false);
+
+ return 0;
+}
+
+static int bcm_remove(struct platform_device *pdev)
+{
+ struct bcm_device *dev = platform_get_drvdata(pdev);
+
+ spin_lock(&bcm_device_lock);
+ list_del(&dev->list);
+ spin_unlock(&bcm_device_lock);
+
+ acpi_dev_remove_driver_gpios(ACPI_COMPANION(&pdev->dev));
+
+ dev_info(&pdev->dev, "%s device unregistered.\n", dev->name);
+
+ return 0;
+}
+
static const struct hci_uart_proto bcm_proto = {
.id = HCI_UART_BCM,
.name = "BCM",
@@ -247,12 +543,38 @@ static const struct hci_uart_proto bcm_proto = {
.dequeue = bcm_dequeue,
};
+#ifdef CONFIG_ACPI
+static const struct acpi_device_id bcm_acpi_match[] = {
+ { "BCM2E39", 0 },
+ { "BCM2E67", 0 },
+ { },
+};
+MODULE_DEVICE_TABLE(acpi, bcm_acpi_match);
+#endif
+
+/* Platform suspend and resume callbacks */
+static SIMPLE_DEV_PM_OPS(bcm_pm_ops, bcm_suspend, bcm_resume);
+
+static struct platform_driver bcm_driver = {
+ .probe = bcm_probe,
+ .remove = bcm_remove,
+ .driver = {
+ .name = "hci_bcm",
+ .acpi_match_table = ACPI_PTR(bcm_acpi_match),
+ .pm = &bcm_pm_ops,
+ },
+};
+
int __init bcm_init(void)
{
+ platform_driver_register(&bcm_driver);
+
return hci_uart_register_proto(&bcm_proto);
}
int __exit bcm_deinit(void)
{
+ platform_driver_unregister(&bcm_driver);
+
return hci_uart_unregister_proto(&bcm_proto);
}
diff --git a/drivers/bluetooth/hci_h4.c b/drivers/bluetooth/hci_h4.c
index 57faddc53..eec3f28e4 100644
--- a/drivers/bluetooth/hci_h4.c
+++ b/drivers/bluetooth/hci_h4.c
@@ -223,8 +223,7 @@ struct sk_buff *h4_recv_buf(struct hci_dev *hdev, struct sk_buff *skb,
switch ((&pkts[i])->lsize) {
case 0:
/* No variable data length */
- (&pkts[i])->recv(hdev, skb);
- skb = NULL;
+ dlen = 0;
break;
case 1:
/* Single octet variable length */
@@ -252,6 +251,12 @@ struct sk_buff *h4_recv_buf(struct hci_dev *hdev, struct sk_buff *skb,
kfree_skb(skb);
return ERR_PTR(-EILSEQ);
}
+
+ if (!dlen) {
+ /* No more data, complete frame */
+ (&pkts[i])->recv(hdev, skb);
+ skb = NULL;
+ }
} else {
/* Complete frame */
(&pkts[i])->recv(hdev, skb);
diff --git a/drivers/bluetooth/hci_h5.c b/drivers/bluetooth/hci_h5.c
index 3455cecc9..b35b238a0 100644
--- a/drivers/bluetooth/hci_h5.c
+++ b/drivers/bluetooth/hci_h5.c
@@ -75,7 +75,7 @@ struct h5 {
size_t rx_pending; /* Expecting more bytes */
u8 rx_ack; /* Last ack number received */
- int (*rx_func) (struct hci_uart *hu, u8 c);
+ int (*rx_func)(struct hci_uart *hu, u8 c);
struct timer_list timer; /* Retransmission timer */
diff --git a/drivers/bluetooth/hci_intel.c b/drivers/bluetooth/hci_intel.c
index 5dd07bf05..3a4e7c63f 100644
--- a/drivers/bluetooth/hci_intel.c
+++ b/drivers/bluetooth/hci_intel.c
@@ -24,8 +24,864 @@
#include <linux/kernel.h>
#include <linux/errno.h>
#include <linux/skbuff.h>
+#include <linux/firmware.h>
+#include <linux/module.h>
+#include <linux/wait.h>
+#include <linux/tty.h>
+#include <linux/platform_device.h>
+#include <linux/gpio/consumer.h>
+#include <linux/acpi.h>
#include <net/bluetooth/bluetooth.h>
#include <net/bluetooth/hci_core.h>
#include "hci_uart.h"
+#include "btintel.h"
+
+#define STATE_BOOTLOADER 0
+#define STATE_DOWNLOADING 1
+#define STATE_FIRMWARE_LOADED 2
+#define STATE_FIRMWARE_FAILED 3
+#define STATE_BOOTING 4
+
+struct intel_device {
+ struct list_head list;
+ struct platform_device *pdev;
+ struct gpio_desc *reset;
+};
+
+static LIST_HEAD(intel_device_list);
+static DEFINE_SPINLOCK(intel_device_list_lock);
+
+struct intel_data {
+ struct sk_buff *rx_skb;
+ struct sk_buff_head txq;
+ unsigned long flags;
+};
+
+static u8 intel_convert_speed(unsigned int speed)
+{
+ switch (speed) {
+ case 9600:
+ return 0x00;
+ case 19200:
+ return 0x01;
+ case 38400:
+ return 0x02;
+ case 57600:
+ return 0x03;
+ case 115200:
+ return 0x04;
+ case 230400:
+ return 0x05;
+ case 460800:
+ return 0x06;
+ case 921600:
+ return 0x07;
+ case 1843200:
+ return 0x08;
+ case 3250000:
+ return 0x09;
+ case 2000000:
+ return 0x0a;
+ case 3000000:
+ return 0x0b;
+ default:
+ return 0xff;
+ }
+}
+
+static int intel_wait_booting(struct hci_uart *hu)
+{
+ struct intel_data *intel = hu->priv;
+ int err;
+
+ err = wait_on_bit_timeout(&intel->flags, STATE_BOOTING,
+ TASK_INTERRUPTIBLE,
+ msecs_to_jiffies(1000));
+
+ if (err == 1) {
+ BT_ERR("%s: Device boot interrupted", hu->hdev->name);
+ return -EINTR;
+ }
+
+ if (err) {
+ BT_ERR("%s: Device boot timeout", hu->hdev->name);
+ return -ETIMEDOUT;
+ }
+
+ return err;
+}
+
+static int intel_set_power(struct hci_uart *hu, bool powered)
+{
+ struct list_head *p;
+ int err = -ENODEV;
+
+ spin_lock(&intel_device_list_lock);
+
+ list_for_each(p, &intel_device_list) {
+ struct intel_device *idev = list_entry(p, struct intel_device,
+ list);
+
+ /* tty device and pdev device should share the same parent
+ * which is the UART port.
+ */
+ if (hu->tty->dev->parent != idev->pdev->dev.parent)
+ continue;
+
+ if (!idev->reset) {
+ err = -ENOTSUPP;
+ break;
+ }
+
+ BT_INFO("hu %p, Switching compatible pm device (%s) to %u",
+ hu, dev_name(&idev->pdev->dev), powered);
+
+ gpiod_set_value(idev->reset, powered);
+ }
+
+ spin_unlock(&intel_device_list_lock);
+
+ return err;
+}
+
+static int intel_open(struct hci_uart *hu)
+{
+ struct intel_data *intel;
+
+ BT_DBG("hu %p", hu);
+
+ intel = kzalloc(sizeof(*intel), GFP_KERNEL);
+ if (!intel)
+ return -ENOMEM;
+
+ skb_queue_head_init(&intel->txq);
+
+ hu->priv = intel;
+
+ if (!intel_set_power(hu, true))
+ set_bit(STATE_BOOTING, &intel->flags);
+
+ return 0;
+}
+
+static int intel_close(struct hci_uart *hu)
+{
+ struct intel_data *intel = hu->priv;
+
+ BT_DBG("hu %p", hu);
+
+ intel_set_power(hu, false);
+
+ skb_queue_purge(&intel->txq);
+ kfree_skb(intel->rx_skb);
+ kfree(intel);
+
+ hu->priv = NULL;
+ return 0;
+}
+
+static int intel_flush(struct hci_uart *hu)
+{
+ struct intel_data *intel = hu->priv;
+
+ BT_DBG("hu %p", hu);
+
+ skb_queue_purge(&intel->txq);
+
+ return 0;
+}
+
+static int inject_cmd_complete(struct hci_dev *hdev, __u16 opcode)
+{
+ struct sk_buff *skb;
+ struct hci_event_hdr *hdr;
+ struct hci_ev_cmd_complete *evt;
+
+ skb = bt_skb_alloc(sizeof(*hdr) + sizeof(*evt) + 1, GFP_ATOMIC);
+ if (!skb)
+ return -ENOMEM;
+
+ hdr = (struct hci_event_hdr *)skb_put(skb, sizeof(*hdr));
+ hdr->evt = HCI_EV_CMD_COMPLETE;
+ hdr->plen = sizeof(*evt) + 1;
+
+ evt = (struct hci_ev_cmd_complete *)skb_put(skb, sizeof(*evt));
+ evt->ncmd = 0x01;
+ evt->opcode = cpu_to_le16(opcode);
+
+ *skb_put(skb, 1) = 0x00;
+
+ bt_cb(skb)->pkt_type = HCI_EVENT_PKT;
+
+ return hci_recv_frame(hdev, skb);
+}
+
+static int intel_set_baudrate(struct hci_uart *hu, unsigned int speed)
+{
+ struct intel_data *intel = hu->priv;
+ struct hci_dev *hdev = hu->hdev;
+ u8 speed_cmd[] = { 0x06, 0xfc, 0x01, 0x00 };
+ struct sk_buff *skb;
+ int err;
+
+ /* This can be the first command sent to the chip, check
+ * that the controller is ready.
+ */
+ err = intel_wait_booting(hu);
+
+ clear_bit(STATE_BOOTING, &intel->flags);
+
+ /* In case of timeout, try to continue anyway */
+ if (err && err != ETIMEDOUT)
+ return err;
+
+ BT_INFO("%s: Change controller speed to %d", hdev->name, speed);
+
+ speed_cmd[3] = intel_convert_speed(speed);
+ if (speed_cmd[3] == 0xff) {
+ BT_ERR("%s: Unsupported speed", hdev->name);
+ return -EINVAL;
+ }
+
+ /* Device will not accept speed change if Intel version has not been
+ * previously requested.
+ */
+ skb = __hci_cmd_sync(hdev, 0xfc05, 0, NULL, HCI_INIT_TIMEOUT);
+ if (IS_ERR(skb)) {
+ BT_ERR("%s: Reading Intel version information failed (%ld)",
+ hdev->name, PTR_ERR(skb));
+ return PTR_ERR(skb);
+ }
+ kfree_skb(skb);
+
+ skb = bt_skb_alloc(sizeof(speed_cmd), GFP_KERNEL);
+ if (!skb) {
+ BT_ERR("%s: Failed to allocate memory for baudrate packet",
+ hdev->name);
+ return -ENOMEM;
+ }
+
+ memcpy(skb_put(skb, sizeof(speed_cmd)), speed_cmd, sizeof(speed_cmd));
+ bt_cb(skb)->pkt_type = HCI_COMMAND_PKT;
+
+ hci_uart_set_flow_control(hu, true);
+
+ skb_queue_tail(&intel->txq, skb);
+ hci_uart_tx_wakeup(hu);
+
+ /* wait 100ms to change baudrate on controller side */
+ msleep(100);
+
+ hci_uart_set_baudrate(hu, speed);
+ hci_uart_set_flow_control(hu, false);
+
+ return 0;
+}
+
+static int intel_setup(struct hci_uart *hu)
+{
+ static const u8 reset_param[] = { 0x00, 0x01, 0x00, 0x01,
+ 0x00, 0x08, 0x04, 0x00 };
+ struct intel_data *intel = hu->priv;
+ struct hci_dev *hdev = hu->hdev;
+ struct sk_buff *skb;
+ struct intel_version *ver;
+ struct intel_boot_params *params;
+ const struct firmware *fw;
+ const u8 *fw_ptr;
+ char fwname[64];
+ u32 frag_len;
+ ktime_t calltime, delta, rettime;
+ unsigned long long duration;
+ unsigned int init_speed, oper_speed;
+ int speed_change = 0;
+ int err;
+
+ BT_DBG("%s", hdev->name);
+
+ hu->hdev->set_bdaddr = btintel_set_bdaddr;
+
+ calltime = ktime_get();
+
+ if (hu->init_speed)
+ init_speed = hu->init_speed;
+ else
+ init_speed = hu->proto->init_speed;
+
+ if (hu->oper_speed)
+ oper_speed = hu->oper_speed;
+ else
+ oper_speed = hu->proto->oper_speed;
+
+ if (oper_speed && init_speed && oper_speed != init_speed)
+ speed_change = 1;
+
+ /* Check that the controller is ready */
+ err = intel_wait_booting(hu);
+
+ clear_bit(STATE_BOOTING, &intel->flags);
+
+ /* In case of timeout, try to continue anyway */
+ if (err && err != ETIMEDOUT)
+ return err;
+
+ set_bit(STATE_BOOTLOADER, &intel->flags);
+
+ /* Read the Intel version information to determine if the device
+ * is in bootloader mode or if it already has operational firmware
+ * loaded.
+ */
+ skb = __hci_cmd_sync(hdev, 0xfc05, 0, NULL, HCI_INIT_TIMEOUT);
+ if (IS_ERR(skb)) {
+ BT_ERR("%s: Reading Intel version information failed (%ld)",
+ hdev->name, PTR_ERR(skb));
+ return PTR_ERR(skb);
+ }
+
+ if (skb->len != sizeof(*ver)) {
+ BT_ERR("%s: Intel version event size mismatch", hdev->name);
+ kfree_skb(skb);
+ return -EILSEQ;
+ }
+
+ ver = (struct intel_version *)skb->data;
+ if (ver->status) {
+ BT_ERR("%s: Intel version command failure (%02x)",
+ hdev->name, ver->status);
+ err = -bt_to_errno(ver->status);
+ kfree_skb(skb);
+ return err;
+ }
+
+ /* The hardware platform number has a fixed value of 0x37 and
+ * for now only accept this single value.
+ */
+ if (ver->hw_platform != 0x37) {
+ BT_ERR("%s: Unsupported Intel hardware platform (%u)",
+ hdev->name, ver->hw_platform);
+ kfree_skb(skb);
+ return -EINVAL;
+ }
+
+ /* At the moment only the hardware variant iBT 3.0 (LnP/SfP) is
+ * supported by this firmware loading method. This check has been
+ * put in place to ensure correct forward compatibility options
+ * when newer hardware variants come along.
+ */
+ if (ver->hw_variant != 0x0b) {
+ BT_ERR("%s: Unsupported Intel hardware variant (%u)",
+ hdev->name, ver->hw_variant);
+ kfree_skb(skb);
+ return -EINVAL;
+ }
+
+ btintel_version_info(hdev, ver);
+
+ /* The firmware variant determines if the device is in bootloader
+ * mode or is running operational firmware. The value 0x06 identifies
+ * the bootloader and the value 0x23 identifies the operational
+ * firmware.
+ *
+ * When the operational firmware is already present, then only
+ * the check for valid Bluetooth device address is needed. This
+ * determines if the device will be added as configured or
+ * unconfigured controller.
+ *
+ * It is not possible to use the Secure Boot Parameters in this
+ * case since that command is only available in bootloader mode.
+ */
+ if (ver->fw_variant == 0x23) {
+ kfree_skb(skb);
+ clear_bit(STATE_BOOTLOADER, &intel->flags);
+ btintel_check_bdaddr(hdev);
+ return 0;
+ }
+
+ /* If the device is not in bootloader mode, then the only possible
+ * choice is to return an error and abort the device initialization.
+ */
+ if (ver->fw_variant != 0x06) {
+ BT_ERR("%s: Unsupported Intel firmware variant (%u)",
+ hdev->name, ver->fw_variant);
+ kfree_skb(skb);
+ return -ENODEV;
+ }
+
+ kfree_skb(skb);
+
+ /* Read the secure boot parameters to identify the operating
+ * details of the bootloader.
+ */
+ skb = __hci_cmd_sync(hdev, 0xfc0d, 0, NULL, HCI_INIT_TIMEOUT);
+ if (IS_ERR(skb)) {
+ BT_ERR("%s: Reading Intel boot parameters failed (%ld)",
+ hdev->name, PTR_ERR(skb));
+ return PTR_ERR(skb);
+ }
+
+ if (skb->len != sizeof(*params)) {
+ BT_ERR("%s: Intel boot parameters size mismatch", hdev->name);
+ kfree_skb(skb);
+ return -EILSEQ;
+ }
+
+ params = (struct intel_boot_params *)skb->data;
+ if (params->status) {
+ BT_ERR("%s: Intel boot parameters command failure (%02x)",
+ hdev->name, params->status);
+ err = -bt_to_errno(params->status);
+ kfree_skb(skb);
+ return err;
+ }
+
+ BT_INFO("%s: Device revision is %u", hdev->name,
+ le16_to_cpu(params->dev_revid));
+
+ BT_INFO("%s: Secure boot is %s", hdev->name,
+ params->secure_boot ? "enabled" : "disabled");
+
+ BT_INFO("%s: Minimum firmware build %u week %u %u", hdev->name,
+ params->min_fw_build_nn, params->min_fw_build_cw,
+ 2000 + params->min_fw_build_yy);
+
+ /* It is required that every single firmware fragment is acknowledged
+ * with a command complete event. If the boot parameters indicate
+ * that this bootloader does not send them, then abort the setup.
+ */
+ if (params->limited_cce != 0x00) {
+ BT_ERR("%s: Unsupported Intel firmware loading method (%u)",
+ hdev->name, params->limited_cce);
+ kfree_skb(skb);
+ return -EINVAL;
+ }
+
+ /* If the OTP has no valid Bluetooth device address, then there will
+ * also be no valid address for the operational firmware.
+ */
+ if (!bacmp(&params->otp_bdaddr, BDADDR_ANY)) {
+ BT_INFO("%s: No device address configured", hdev->name);
+ set_bit(HCI_QUIRK_INVALID_BDADDR, &hdev->quirks);
+ }
+
+ /* With this Intel bootloader only the hardware variant and device
+ * revision information are used to select the right firmware.
+ *
+ * Currently this bootloader support is limited to hardware variant
+ * iBT 3.0 (LnP/SfP) which is identified by the value 11 (0x0b).
+ */
+ snprintf(fwname, sizeof(fwname), "/*(DEBLOBBED)*/",
+ le16_to_cpu(params->dev_revid));
+
+ err = reject_firmware(&fw, fwname, &hdev->dev);
+ if (err < 0) {
+ BT_ERR("%s: Failed to load Intel firmware file (%d)",
+ hdev->name, err);
+ kfree_skb(skb);
+ return err;
+ }
+
+ BT_INFO("%s: Found device firmware: %s", hdev->name, fwname);
+
+ kfree_skb(skb);
+
+ if (fw->size < 644) {
+ BT_ERR("%s: Invalid size of firmware file (%zu)",
+ hdev->name, fw->size);
+ err = -EBADF;
+ goto done;
+ }
+
+ set_bit(STATE_DOWNLOADING, &intel->flags);
+
+ /* Start the firmware download transaction with the Init fragment
+ * represented by the 128 bytes of CSS header.
+ */
+ err = btintel_secure_send(hdev, 0x00, 128, fw->data);
+ if (err < 0) {
+ BT_ERR("%s: Failed to send firmware header (%d)",
+ hdev->name, err);
+ goto done;
+ }
+
+ /* Send the 256 bytes of public key information from the firmware
+ * as the PKey fragment.
+ */
+ err = btintel_secure_send(hdev, 0x03, 256, fw->data + 128);
+ if (err < 0) {
+ BT_ERR("%s: Failed to send firmware public key (%d)",
+ hdev->name, err);
+ goto done;
+ }
+
+ /* Send the 256 bytes of signature information from the firmware
+ * as the Sign fragment.
+ */
+ err = btintel_secure_send(hdev, 0x02, 256, fw->data + 388);
+ if (err < 0) {
+ BT_ERR("%s: Failed to send firmware signature (%d)",
+ hdev->name, err);
+ goto done;
+ }
+
+ fw_ptr = fw->data + 644;
+ frag_len = 0;
+
+ while (fw_ptr - fw->data < fw->size) {
+ struct hci_command_hdr *cmd = (void *)(fw_ptr + frag_len);
+
+ frag_len += sizeof(*cmd) + cmd->plen;
+
+ BT_DBG("%s: patching %td/%zu", hdev->name,
+ (fw_ptr - fw->data), fw->size);
+
+ /* The parameter length of the secure send command requires
+ * a 4 byte alignment. It happens so that the firmware file
+ * contains proper Intel_NOP commands to align the fragments
+ * as needed.
+ *
+ * Send set of commands with 4 byte alignment from the
+ * firmware data buffer as a single Data fragement.
+ */
+ if (frag_len % 4)
+ continue;
+
+ /* Send each command from the firmware data buffer as
+ * a single Data fragment.
+ */
+ err = btintel_secure_send(hdev, 0x01, frag_len, fw_ptr);
+ if (err < 0) {
+ BT_ERR("%s: Failed to send firmware data (%d)",
+ hdev->name, err);
+ goto done;
+ }
+
+ fw_ptr += frag_len;
+ frag_len = 0;
+ }
+
+ set_bit(STATE_FIRMWARE_LOADED, &intel->flags);
+
+ BT_INFO("%s: Waiting for firmware download to complete", hdev->name);
+
+ /* Before switching the device into operational mode and with that
+ * booting the loaded firmware, wait for the bootloader notification
+ * that all fragments have been successfully received.
+ *
+ * When the event processing receives the notification, then the
+ * STATE_DOWNLOADING flag will be cleared.
+ *
+ * The firmware loading should not take longer than 5 seconds
+ * and thus just timeout if that happens and fail the setup
+ * of this device.
+ */
+ err = wait_on_bit_timeout(&intel->flags, STATE_DOWNLOADING,
+ TASK_INTERRUPTIBLE,
+ msecs_to_jiffies(5000));
+ if (err == 1) {
+ BT_ERR("%s: Firmware loading interrupted", hdev->name);
+ err = -EINTR;
+ goto done;
+ }
+
+ if (err) {
+ BT_ERR("%s: Firmware loading timeout", hdev->name);
+ err = -ETIMEDOUT;
+ goto done;
+ }
+
+ if (test_bit(STATE_FIRMWARE_FAILED, &intel->flags)) {
+ BT_ERR("%s: Firmware loading failed", hdev->name);
+ err = -ENOEXEC;
+ goto done;
+ }
+
+ rettime = ktime_get();
+ delta = ktime_sub(rettime, calltime);
+ duration = (unsigned long long) ktime_to_ns(delta) >> 10;
+
+ BT_INFO("%s: Firmware loaded in %llu usecs", hdev->name, duration);
+
+done:
+ release_firmware(fw);
+
+ if (err < 0)
+ return err;
+
+ /* We need to restore the default speed before Intel reset */
+ if (speed_change) {
+ err = intel_set_baudrate(hu, init_speed);
+ if (err)
+ return err;
+ }
+
+ calltime = ktime_get();
+
+ set_bit(STATE_BOOTING, &intel->flags);
+
+ skb = __hci_cmd_sync(hdev, 0xfc01, sizeof(reset_param), reset_param,
+ HCI_INIT_TIMEOUT);
+ if (IS_ERR(skb))
+ return PTR_ERR(skb);
+
+ kfree_skb(skb);
+
+ /* The bootloader will not indicate when the device is ready. This
+ * is done by the operational firmware sending bootup notification.
+ *
+ * Booting into operational firmware should not take longer than
+ * 1 second. However if that happens, then just fail the setup
+ * since something went wrong.
+ */
+ BT_INFO("%s: Waiting for device to boot", hdev->name);
+
+ err = intel_wait_booting(hu);
+ if (err)
+ return err;
+
+ clear_bit(STATE_BOOTING, &intel->flags);
+
+ rettime = ktime_get();
+ delta = ktime_sub(rettime, calltime);
+ duration = (unsigned long long) ktime_to_ns(delta) >> 10;
+
+ BT_INFO("%s: Device booted in %llu usecs", hdev->name, duration);
+
+ skb = __hci_cmd_sync(hdev, HCI_OP_RESET, 0, NULL, HCI_CMD_TIMEOUT);
+ if (IS_ERR(skb))
+ return PTR_ERR(skb);
+ kfree_skb(skb);
+
+ if (speed_change) {
+ err = intel_set_baudrate(hu, oper_speed);
+ if (err)
+ return err;
+ }
+
+ BT_INFO("%s: Setup complete", hdev->name);
+
+ clear_bit(STATE_BOOTLOADER, &intel->flags);
+
+ return 0;
+}
+
+static int intel_recv_event(struct hci_dev *hdev, struct sk_buff *skb)
+{
+ struct hci_uart *hu = hci_get_drvdata(hdev);
+ struct intel_data *intel = hu->priv;
+ struct hci_event_hdr *hdr;
+
+ if (!test_bit(STATE_BOOTLOADER, &intel->flags) &&
+ !test_bit(STATE_BOOTING, &intel->flags))
+ goto recv;
+
+ hdr = (void *)skb->data;
+
+ /* When the firmware loading completes the device sends
+ * out a vendor specific event indicating the result of
+ * the firmware loading.
+ */
+ if (skb->len == 7 && hdr->evt == 0xff && hdr->plen == 0x05 &&
+ skb->data[2] == 0x06) {
+ if (skb->data[3] != 0x00)
+ set_bit(STATE_FIRMWARE_FAILED, &intel->flags);
+
+ if (test_and_clear_bit(STATE_DOWNLOADING, &intel->flags) &&
+ test_bit(STATE_FIRMWARE_LOADED, &intel->flags)) {
+ smp_mb__after_atomic();
+ wake_up_bit(&intel->flags, STATE_DOWNLOADING);
+ }
+
+ /* When switching to the operational firmware the device
+ * sends a vendor specific event indicating that the bootup
+ * completed.
+ */
+ } else if (skb->len == 9 && hdr->evt == 0xff && hdr->plen == 0x07 &&
+ skb->data[2] == 0x02) {
+ if (test_and_clear_bit(STATE_BOOTING, &intel->flags)) {
+ smp_mb__after_atomic();
+ wake_up_bit(&intel->flags, STATE_BOOTING);
+ }
+ }
+recv:
+ return hci_recv_frame(hdev, skb);
+}
+
+static const struct h4_recv_pkt intel_recv_pkts[] = {
+ { H4_RECV_ACL, .recv = hci_recv_frame },
+ { H4_RECV_SCO, .recv = hci_recv_frame },
+ { H4_RECV_EVENT, .recv = intel_recv_event },
+};
+
+static int intel_recv(struct hci_uart *hu, const void *data, int count)
+{
+ struct intel_data *intel = hu->priv;
+
+ if (!test_bit(HCI_UART_REGISTERED, &hu->flags))
+ return -EUNATCH;
+
+ intel->rx_skb = h4_recv_buf(hu->hdev, intel->rx_skb, data, count,
+ intel_recv_pkts,
+ ARRAY_SIZE(intel_recv_pkts));
+ if (IS_ERR(intel->rx_skb)) {
+ int err = PTR_ERR(intel->rx_skb);
+ BT_ERR("%s: Frame reassembly failed (%d)", hu->hdev->name, err);
+ intel->rx_skb = NULL;
+ return err;
+ }
+
+ return count;
+}
+
+static int intel_enqueue(struct hci_uart *hu, struct sk_buff *skb)
+{
+ struct intel_data *intel = hu->priv;
+
+ BT_DBG("hu %p skb %p", hu, skb);
+
+ skb_queue_tail(&intel->txq, skb);
+
+ return 0;
+}
+
+static struct sk_buff *intel_dequeue(struct hci_uart *hu)
+{
+ struct intel_data *intel = hu->priv;
+ struct sk_buff *skb;
+
+ skb = skb_dequeue(&intel->txq);
+ if (!skb)
+ return skb;
+
+ if (test_bit(STATE_BOOTLOADER, &intel->flags) &&
+ (bt_cb(skb)->pkt_type == HCI_COMMAND_PKT)) {
+ struct hci_command_hdr *cmd = (void *)skb->data;
+ __u16 opcode = le16_to_cpu(cmd->opcode);
+
+ /* When the 0xfc01 command is issued to boot into
+ * the operational firmware, it will actually not
+ * send a command complete event. To keep the flow
+ * control working inject that event here.
+ */
+ if (opcode == 0xfc01)
+ inject_cmd_complete(hu->hdev, opcode);
+ }
+
+ /* Prepend skb with frame type */
+ memcpy(skb_push(skb, 1), &bt_cb(skb)->pkt_type, 1);
+
+ return skb;
+}
+
+static const struct hci_uart_proto intel_proto = {
+ .id = HCI_UART_INTEL,
+ .name = "Intel",
+ .init_speed = 115200,
+ .oper_speed = 3000000,
+ .open = intel_open,
+ .close = intel_close,
+ .flush = intel_flush,
+ .setup = intel_setup,
+ .set_baudrate = intel_set_baudrate,
+ .recv = intel_recv,
+ .enqueue = intel_enqueue,
+ .dequeue = intel_dequeue,
+};
+
+#ifdef CONFIG_ACPI
+static const struct acpi_device_id intel_acpi_match[] = {
+ { "INT33E1", 0 },
+ { },
+};
+MODULE_DEVICE_TABLE(acpi, intel_acpi_match);
+
+static int intel_acpi_probe(struct intel_device *idev)
+{
+ const struct acpi_device_id *id;
+
+ id = acpi_match_device(intel_acpi_match, &idev->pdev->dev);
+ if (!id)
+ return -ENODEV;
+
+ return 0;
+}
+#else
+static int intel_acpi_probe(struct intel_device *idev)
+{
+ return -ENODEV;
+}
+#endif
+
+static int intel_probe(struct platform_device *pdev)
+{
+ struct intel_device *idev;
+
+ idev = devm_kzalloc(&pdev->dev, sizeof(*idev), GFP_KERNEL);
+ if (!idev)
+ return -ENOMEM;
+
+ idev->pdev = pdev;
+
+ if (ACPI_HANDLE(&pdev->dev)) {
+ int err = intel_acpi_probe(idev);
+ if (err)
+ return err;
+ } else {
+ return -ENODEV;
+ }
+
+ idev->reset = devm_gpiod_get_optional(&pdev->dev, "reset",
+ GPIOD_OUT_LOW);
+ if (IS_ERR(idev->reset)) {
+ dev_err(&pdev->dev, "Unable to retrieve gpio\n");
+ return PTR_ERR(idev->reset);
+ }
+
+ platform_set_drvdata(pdev, idev);
+
+ /* Place this instance on the device list */
+ spin_lock(&intel_device_list_lock);
+ list_add_tail(&idev->list, &intel_device_list);
+ spin_unlock(&intel_device_list_lock);
+
+ dev_info(&pdev->dev, "registered.\n");
+
+ return 0;
+}
+
+static int intel_remove(struct platform_device *pdev)
+{
+ struct intel_device *idev = platform_get_drvdata(pdev);
+
+ spin_lock(&intel_device_list_lock);
+ list_del(&idev->list);
+ spin_unlock(&intel_device_list_lock);
+
+ dev_info(&pdev->dev, "unregistered.\n");
+
+ return 0;
+}
+
+static struct platform_driver intel_driver = {
+ .probe = intel_probe,
+ .remove = intel_remove,
+ .driver = {
+ .name = "hci_intel",
+ .acpi_match_table = ACPI_PTR(intel_acpi_match),
+ },
+};
+
+int __init intel_init(void)
+{
+ platform_driver_register(&intel_driver);
+
+ return hci_uart_register_proto(&intel_proto);
+}
+
+int __exit intel_deinit(void)
+{
+ platform_driver_unregister(&intel_driver);
+
+ return hci_uart_unregister_proto(&intel_proto);
+}
diff --git a/drivers/bluetooth/hci_ldisc.c b/drivers/bluetooth/hci_ldisc.c
index 177dd69fd..0d5a05a7c 100644
--- a/drivers/bluetooth/hci_ldisc.c
+++ b/drivers/bluetooth/hci_ldisc.c
@@ -770,7 +770,7 @@ static int __init hci_uart_init(void)
/* Register the tty discipline */
- memset(&hci_uart_ldisc, 0, sizeof (hci_uart_ldisc));
+ memset(&hci_uart_ldisc, 0, sizeof(hci_uart_ldisc));
hci_uart_ldisc.magic = TTY_LDISC_MAGIC;
hci_uart_ldisc.name = "n_hci";
hci_uart_ldisc.open = hci_uart_tty_open;
@@ -804,9 +804,15 @@ static int __init hci_uart_init(void)
#ifdef CONFIG_BT_HCIUART_3WIRE
h5_init();
#endif
+#ifdef CONFIG_BT_HCIUART_INTEL
+ intel_init();
+#endif
#ifdef CONFIG_BT_HCIUART_BCM
bcm_init();
#endif
+#ifdef CONFIG_BT_HCIUART_QCA
+ qca_init();
+#endif
return 0;
}
@@ -830,9 +836,15 @@ static void __exit hci_uart_exit(void)
#ifdef CONFIG_BT_HCIUART_3WIRE
h5_deinit();
#endif
+#ifdef CONFIG_BT_HCIUART_INTEL
+ intel_deinit();
+#endif
#ifdef CONFIG_BT_HCIUART_BCM
bcm_deinit();
#endif
+#ifdef CONFIG_BT_HCIUART_QCA
+ qca_deinit();
+#endif
/* Release tty registration of line discipline */
err = tty_unregister_ldisc(N_HCI);
diff --git a/drivers/bluetooth/hci_qca.c b/drivers/bluetooth/hci_qca.c
new file mode 100644
index 000000000..6b9b91267
--- /dev/null
+++ b/drivers/bluetooth/hci_qca.c
@@ -0,0 +1,969 @@
+/*
+ * Bluetooth Software UART Qualcomm protocol
+ *
+ * HCI_IBS (HCI In-Band Sleep) is Qualcomm's power management
+ * protocol extension to H4.
+ *
+ * Copyright (C) 2007 Texas Instruments, Inc.
+ * Copyright (c) 2010, 2012 The Linux Foundation. All rights reserved.
+ *
+ * Acknowledgements:
+ * This file is based on hci_ll.c, which was...
+ * Written by Ohad Ben-Cohen <ohad@bencohen.org>
+ * which was in turn based on hci_h4.c, which was written
+ * by Maxim Krasnyansky and Marcel Holtmann.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2
+ * as published by the Free Software Foundation
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/debugfs.h>
+
+#include <net/bluetooth/bluetooth.h>
+#include <net/bluetooth/hci_core.h>
+
+#include "hci_uart.h"
+#include "btqca.h"
+
+/* HCI_IBS protocol messages */
+#define HCI_IBS_SLEEP_IND 0xFE
+#define HCI_IBS_WAKE_IND 0xFD
+#define HCI_IBS_WAKE_ACK 0xFC
+#define HCI_MAX_IBS_SIZE 10
+
+/* Controller states */
+#define STATE_IN_BAND_SLEEP_ENABLED 1
+
+#define IBS_WAKE_RETRANS_TIMEOUT_MS 100
+#define IBS_TX_IDLE_TIMEOUT_MS 2000
+#define BAUDRATE_SETTLE_TIMEOUT_MS 300
+
+/* HCI_IBS transmit side sleep protocol states */
+enum tx_ibs_states {
+ HCI_IBS_TX_ASLEEP,
+ HCI_IBS_TX_WAKING,
+ HCI_IBS_TX_AWAKE,
+};
+
+/* HCI_IBS receive side sleep protocol states */
+enum rx_states {
+ HCI_IBS_RX_ASLEEP,
+ HCI_IBS_RX_AWAKE,
+};
+
+/* HCI_IBS transmit and receive side clock state vote */
+enum hci_ibs_clock_state_vote {
+ HCI_IBS_VOTE_STATS_UPDATE,
+ HCI_IBS_TX_VOTE_CLOCK_ON,
+ HCI_IBS_TX_VOTE_CLOCK_OFF,
+ HCI_IBS_RX_VOTE_CLOCK_ON,
+ HCI_IBS_RX_VOTE_CLOCK_OFF,
+};
+
+struct qca_data {
+ struct hci_uart *hu;
+ struct sk_buff *rx_skb;
+ struct sk_buff_head txq;
+ struct sk_buff_head tx_wait_q; /* HCI_IBS wait queue */
+ spinlock_t hci_ibs_lock; /* HCI_IBS state lock */
+ u8 tx_ibs_state; /* HCI_IBS transmit side power state*/
+ u8 rx_ibs_state; /* HCI_IBS receive side power state */
+ u32 tx_vote; /* Clock must be on for TX */
+ u32 rx_vote; /* Clock must be on for RX */
+ struct timer_list tx_idle_timer;
+ u32 tx_idle_delay;
+ struct timer_list wake_retrans_timer;
+ u32 wake_retrans;
+ struct workqueue_struct *workqueue;
+ struct work_struct ws_awake_rx;
+ struct work_struct ws_awake_device;
+ struct work_struct ws_rx_vote_off;
+ struct work_struct ws_tx_vote_off;
+ unsigned long flags;
+
+ /* For debugging purpose */
+ u64 ibs_sent_wacks;
+ u64 ibs_sent_slps;
+ u64 ibs_sent_wakes;
+ u64 ibs_recv_wacks;
+ u64 ibs_recv_slps;
+ u64 ibs_recv_wakes;
+ u64 vote_last_jif;
+ u32 vote_on_ms;
+ u32 vote_off_ms;
+ u64 tx_votes_on;
+ u64 rx_votes_on;
+ u64 tx_votes_off;
+ u64 rx_votes_off;
+ u64 votes_on;
+ u64 votes_off;
+};
+
+static void __serial_clock_on(struct tty_struct *tty)
+{
+ /* TODO: Some chipset requires to enable UART clock on client
+ * side to save power consumption or manual work is required.
+ * Please put your code to control UART clock here if needed
+ */
+}
+
+static void __serial_clock_off(struct tty_struct *tty)
+{
+ /* TODO: Some chipset requires to disable UART clock on client
+ * side to save power consumption or manual work is required.
+ * Please put your code to control UART clock off here if needed
+ */
+}
+
+/* serial_clock_vote needs to be called with the ibs lock held */
+static void serial_clock_vote(unsigned long vote, struct hci_uart *hu)
+{
+ struct qca_data *qca = hu->priv;
+ unsigned int diff;
+
+ bool old_vote = (qca->tx_vote | qca->rx_vote);
+ bool new_vote;
+
+ switch (vote) {
+ case HCI_IBS_VOTE_STATS_UPDATE:
+ diff = jiffies_to_msecs(jiffies - qca->vote_last_jif);
+
+ if (old_vote)
+ qca->vote_off_ms += diff;
+ else
+ qca->vote_on_ms += diff;
+ return;
+
+ case HCI_IBS_TX_VOTE_CLOCK_ON:
+ qca->tx_vote = true;
+ qca->tx_votes_on++;
+ new_vote = true;
+ break;
+
+ case HCI_IBS_RX_VOTE_CLOCK_ON:
+ qca->rx_vote = true;
+ qca->rx_votes_on++;
+ new_vote = true;
+ break;
+
+ case HCI_IBS_TX_VOTE_CLOCK_OFF:
+ qca->tx_vote = false;
+ qca->tx_votes_off++;
+ new_vote = qca->rx_vote | qca->tx_vote;
+ break;
+
+ case HCI_IBS_RX_VOTE_CLOCK_OFF:
+ qca->rx_vote = false;
+ qca->rx_votes_off++;
+ new_vote = qca->rx_vote | qca->tx_vote;
+ break;
+
+ default:
+ BT_ERR("Voting irregularity");
+ return;
+ }
+
+ if (new_vote != old_vote) {
+ if (new_vote)
+ __serial_clock_on(hu->tty);
+ else
+ __serial_clock_off(hu->tty);
+
+ BT_DBG("Vote serial clock %s(%s)", new_vote? "true" : "false",
+ vote? "true" : "false");
+
+ diff = jiffies_to_msecs(jiffies - qca->vote_last_jif);
+
+ if (new_vote) {
+ qca->votes_on++;
+ qca->vote_off_ms += diff;
+ } else {
+ qca->votes_off++;
+ qca->vote_on_ms += diff;
+ }
+ qca->vote_last_jif = jiffies;
+ }
+}
+
+/* Builds and sends an HCI_IBS command packet.
+ * These are very simple packets with only 1 cmd byte.
+ */
+static int send_hci_ibs_cmd(u8 cmd, struct hci_uart *hu)
+{
+ int err = 0;
+ struct sk_buff *skb = NULL;
+ struct qca_data *qca = hu->priv;
+
+ BT_DBG("hu %p send hci ibs cmd 0x%x", hu, cmd);
+
+ skb = bt_skb_alloc(1, GFP_ATOMIC);
+ if (!skb) {
+ BT_ERR("Failed to allocate memory for HCI_IBS packet");
+ return -ENOMEM;
+ }
+
+ /* Assign HCI_IBS type */
+ *skb_put(skb, 1) = cmd;
+
+ skb_queue_tail(&qca->txq, skb);
+
+ return err;
+}
+
+static void qca_wq_awake_device(struct work_struct *work)
+{
+ struct qca_data *qca = container_of(work, struct qca_data,
+ ws_awake_device);
+ struct hci_uart *hu = qca->hu;
+ unsigned long retrans_delay;
+
+ BT_DBG("hu %p wq awake device", hu);
+
+ /* Vote for serial clock */
+ serial_clock_vote(HCI_IBS_TX_VOTE_CLOCK_ON, hu);
+
+ spin_lock(&qca->hci_ibs_lock);
+
+ /* Send wake indication to device */
+ if (send_hci_ibs_cmd(HCI_IBS_WAKE_IND, hu) < 0)
+ BT_ERR("Failed to send WAKE to device");
+
+ qca->ibs_sent_wakes++;
+
+ /* Start retransmit timer */
+ retrans_delay = msecs_to_jiffies(qca->wake_retrans);
+ mod_timer(&qca->wake_retrans_timer, jiffies + retrans_delay);
+
+ spin_unlock(&qca->hci_ibs_lock);
+
+ /* Actually send the packets */
+ hci_uart_tx_wakeup(hu);
+}
+
+static void qca_wq_awake_rx(struct work_struct *work)
+{
+ struct qca_data *qca = container_of(work, struct qca_data,
+ ws_awake_rx);
+ struct hci_uart *hu = qca->hu;
+
+ BT_DBG("hu %p wq awake rx", hu);
+
+ serial_clock_vote(HCI_IBS_RX_VOTE_CLOCK_ON, hu);
+
+ spin_lock(&qca->hci_ibs_lock);
+ qca->rx_ibs_state = HCI_IBS_RX_AWAKE;
+
+ /* Always acknowledge device wake up,
+ * sending IBS message doesn't count as TX ON.
+ */
+ if (send_hci_ibs_cmd(HCI_IBS_WAKE_ACK, hu) < 0)
+ BT_ERR("Failed to acknowledge device wake up");
+
+ qca->ibs_sent_wacks++;
+
+ spin_unlock(&qca->hci_ibs_lock);
+
+ /* Actually send the packets */
+ hci_uart_tx_wakeup(hu);
+}
+
+static void qca_wq_serial_rx_clock_vote_off(struct work_struct *work)
+{
+ struct qca_data *qca = container_of(work, struct qca_data,
+ ws_rx_vote_off);
+ struct hci_uart *hu = qca->hu;
+
+ BT_DBG("hu %p rx clock vote off", hu);
+
+ serial_clock_vote(HCI_IBS_RX_VOTE_CLOCK_OFF, hu);
+}
+
+static void qca_wq_serial_tx_clock_vote_off(struct work_struct *work)
+{
+ struct qca_data *qca = container_of(work, struct qca_data,
+ ws_tx_vote_off);
+ struct hci_uart *hu = qca->hu;
+
+ BT_DBG("hu %p tx clock vote off", hu);
+
+ /* Run HCI tx handling unlocked */
+ hci_uart_tx_wakeup(hu);
+
+ /* Now that message queued to tty driver, vote for tty clocks off.
+ * It is up to the tty driver to pend the clocks off until tx done.
+ */
+ serial_clock_vote(HCI_IBS_TX_VOTE_CLOCK_OFF, hu);
+}
+
+static void hci_ibs_tx_idle_timeout(unsigned long arg)
+{
+ struct hci_uart *hu = (struct hci_uart *)arg;
+ struct qca_data *qca = hu->priv;
+ unsigned long flags;
+
+ BT_DBG("hu %p idle timeout in %d state", hu, qca->tx_ibs_state);
+
+ spin_lock_irqsave_nested(&qca->hci_ibs_lock,
+ flags, SINGLE_DEPTH_NESTING);
+
+ switch (qca->tx_ibs_state) {
+ case HCI_IBS_TX_AWAKE:
+ /* TX_IDLE, go to SLEEP */
+ if (send_hci_ibs_cmd(HCI_IBS_SLEEP_IND, hu) < 0) {
+ BT_ERR("Failed to send SLEEP to device");
+ break;
+ }
+ qca->tx_ibs_state = HCI_IBS_TX_ASLEEP;
+ qca->ibs_sent_slps++;
+ queue_work(qca->workqueue, &qca->ws_tx_vote_off);
+ break;
+
+ case HCI_IBS_TX_ASLEEP:
+ case HCI_IBS_TX_WAKING:
+ /* Fall through */
+
+ default:
+ BT_ERR("Spurrious timeout tx state %d", qca->tx_ibs_state);
+ break;
+ }
+
+ spin_unlock_irqrestore(&qca->hci_ibs_lock, flags);
+}
+
+static void hci_ibs_wake_retrans_timeout(unsigned long arg)
+{
+ struct hci_uart *hu = (struct hci_uart *)arg;
+ struct qca_data *qca = hu->priv;
+ unsigned long flags, retrans_delay;
+ unsigned long retransmit = 0;
+
+ BT_DBG("hu %p wake retransmit timeout in %d state",
+ hu, qca->tx_ibs_state);
+
+ spin_lock_irqsave_nested(&qca->hci_ibs_lock,
+ flags, SINGLE_DEPTH_NESTING);
+
+ switch (qca->tx_ibs_state) {
+ case HCI_IBS_TX_WAKING:
+ /* No WAKE_ACK, retransmit WAKE */
+ retransmit = 1;
+ if (send_hci_ibs_cmd(HCI_IBS_WAKE_IND, hu) < 0) {
+ BT_ERR("Failed to acknowledge device wake up");
+ break;
+ }
+ qca->ibs_sent_wakes++;
+ retrans_delay = msecs_to_jiffies(qca->wake_retrans);
+ mod_timer(&qca->wake_retrans_timer, jiffies + retrans_delay);
+ break;
+
+ case HCI_IBS_TX_ASLEEP:
+ case HCI_IBS_TX_AWAKE:
+ /* Fall through */
+
+ default:
+ BT_ERR("Spurrious timeout tx state %d", qca->tx_ibs_state);
+ break;
+ }
+
+ spin_unlock_irqrestore(&qca->hci_ibs_lock, flags);
+
+ if (retransmit)
+ hci_uart_tx_wakeup(hu);
+}
+
+/* Initialize protocol */
+static int qca_open(struct hci_uart *hu)
+{
+ struct qca_data *qca;
+
+ BT_DBG("hu %p qca_open", hu);
+
+ qca = kzalloc(sizeof(struct qca_data), GFP_ATOMIC);
+ if (!qca)
+ return -ENOMEM;
+
+ skb_queue_head_init(&qca->txq);
+ skb_queue_head_init(&qca->tx_wait_q);
+ spin_lock_init(&qca->hci_ibs_lock);
+ qca->workqueue = create_singlethread_workqueue("qca_wq");
+ if (!qca->workqueue) {
+ BT_ERR("QCA Workqueue not initialized properly");
+ kfree(qca);
+ return -ENOMEM;
+ }
+
+ INIT_WORK(&qca->ws_awake_rx, qca_wq_awake_rx);
+ INIT_WORK(&qca->ws_awake_device, qca_wq_awake_device);
+ INIT_WORK(&qca->ws_rx_vote_off, qca_wq_serial_rx_clock_vote_off);
+ INIT_WORK(&qca->ws_tx_vote_off, qca_wq_serial_tx_clock_vote_off);
+
+ qca->hu = hu;
+
+ /* Assume we start with both sides asleep -- extra wakes OK */
+ qca->tx_ibs_state = HCI_IBS_TX_ASLEEP;
+ qca->rx_ibs_state = HCI_IBS_RX_ASLEEP;
+
+ /* clocks actually on, but we start votes off */
+ qca->tx_vote = false;
+ qca->rx_vote = false;
+ qca->flags = 0;
+
+ qca->ibs_sent_wacks = 0;
+ qca->ibs_sent_slps = 0;
+ qca->ibs_sent_wakes = 0;
+ qca->ibs_recv_wacks = 0;
+ qca->ibs_recv_slps = 0;
+ qca->ibs_recv_wakes = 0;
+ qca->vote_last_jif = jiffies;
+ qca->vote_on_ms = 0;
+ qca->vote_off_ms = 0;
+ qca->votes_on = 0;
+ qca->votes_off = 0;
+ qca->tx_votes_on = 0;
+ qca->tx_votes_off = 0;
+ qca->rx_votes_on = 0;
+ qca->rx_votes_off = 0;
+
+ hu->priv = qca;
+
+ init_timer(&qca->wake_retrans_timer);
+ qca->wake_retrans_timer.function = hci_ibs_wake_retrans_timeout;
+ qca->wake_retrans_timer.data = (u_long)hu;
+ qca->wake_retrans = IBS_WAKE_RETRANS_TIMEOUT_MS;
+
+ init_timer(&qca->tx_idle_timer);
+ qca->tx_idle_timer.function = hci_ibs_tx_idle_timeout;
+ qca->tx_idle_timer.data = (u_long)hu;
+ qca->tx_idle_delay = IBS_TX_IDLE_TIMEOUT_MS;
+
+ BT_DBG("HCI_UART_QCA open, tx_idle_delay=%u, wake_retrans=%u",
+ qca->tx_idle_delay, qca->wake_retrans);
+
+ return 0;
+}
+
+static void qca_debugfs_init(struct hci_dev *hdev)
+{
+ struct hci_uart *hu = hci_get_drvdata(hdev);
+ struct qca_data *qca = hu->priv;
+ struct dentry *ibs_dir;
+ umode_t mode;
+
+ if (!hdev->debugfs)
+ return;
+
+ ibs_dir = debugfs_create_dir("ibs", hdev->debugfs);
+
+ /* read only */
+ mode = S_IRUGO;
+ debugfs_create_u8("tx_ibs_state", mode, ibs_dir, &qca->tx_ibs_state);
+ debugfs_create_u8("rx_ibs_state", mode, ibs_dir, &qca->rx_ibs_state);
+ debugfs_create_u64("ibs_sent_sleeps", mode, ibs_dir,
+ &qca->ibs_sent_slps);
+ debugfs_create_u64("ibs_sent_wakes", mode, ibs_dir,
+ &qca->ibs_sent_wakes);
+ debugfs_create_u64("ibs_sent_wake_acks", mode, ibs_dir,
+ &qca->ibs_sent_wacks);
+ debugfs_create_u64("ibs_recv_sleeps", mode, ibs_dir,
+ &qca->ibs_recv_slps);
+ debugfs_create_u64("ibs_recv_wakes", mode, ibs_dir,
+ &qca->ibs_recv_wakes);
+ debugfs_create_u64("ibs_recv_wake_acks", mode, ibs_dir,
+ &qca->ibs_recv_wacks);
+ debugfs_create_bool("tx_vote", mode, ibs_dir, &qca->tx_vote);
+ debugfs_create_u64("tx_votes_on", mode, ibs_dir, &qca->tx_votes_on);
+ debugfs_create_u64("tx_votes_off", mode, ibs_dir, &qca->tx_votes_off);
+ debugfs_create_bool("rx_vote", mode, ibs_dir, &qca->rx_vote);
+ debugfs_create_u64("rx_votes_on", mode, ibs_dir, &qca->rx_votes_on);
+ debugfs_create_u64("rx_votes_off", mode, ibs_dir, &qca->rx_votes_off);
+ debugfs_create_u64("votes_on", mode, ibs_dir, &qca->votes_on);
+ debugfs_create_u64("votes_off", mode, ibs_dir, &qca->votes_off);
+ debugfs_create_u32("vote_on_ms", mode, ibs_dir, &qca->vote_on_ms);
+ debugfs_create_u32("vote_off_ms", mode, ibs_dir, &qca->vote_off_ms);
+
+ /* read/write */
+ mode = S_IRUGO | S_IWUSR;
+ debugfs_create_u32("wake_retrans", mode, ibs_dir, &qca->wake_retrans);
+ debugfs_create_u32("tx_idle_delay", mode, ibs_dir,
+ &qca->tx_idle_delay);
+}
+
+/* Flush protocol data */
+static int qca_flush(struct hci_uart *hu)
+{
+ struct qca_data *qca = hu->priv;
+
+ BT_DBG("hu %p qca flush", hu);
+
+ skb_queue_purge(&qca->tx_wait_q);
+ skb_queue_purge(&qca->txq);
+
+ return 0;
+}
+
+/* Close protocol */
+static int qca_close(struct hci_uart *hu)
+{
+ struct qca_data *qca = hu->priv;
+
+ BT_DBG("hu %p qca close", hu);
+
+ serial_clock_vote(HCI_IBS_VOTE_STATS_UPDATE, hu);
+
+ skb_queue_purge(&qca->tx_wait_q);
+ skb_queue_purge(&qca->txq);
+ del_timer(&qca->tx_idle_timer);
+ del_timer(&qca->wake_retrans_timer);
+ destroy_workqueue(qca->workqueue);
+ qca->hu = NULL;
+
+ kfree_skb(qca->rx_skb);
+
+ hu->priv = NULL;
+
+ kfree(qca);
+
+ return 0;
+}
+
+/* Called upon a wake-up-indication from the device.
+ */
+static void device_want_to_wakeup(struct hci_uart *hu)
+{
+ unsigned long flags;
+ struct qca_data *qca = hu->priv;
+
+ BT_DBG("hu %p want to wake up", hu);
+
+ spin_lock_irqsave(&qca->hci_ibs_lock, flags);
+
+ qca->ibs_recv_wakes++;
+
+ switch (qca->rx_ibs_state) {
+ case HCI_IBS_RX_ASLEEP:
+ /* Make sure clock is on - we may have turned clock off since
+ * receiving the wake up indicator awake rx clock.
+ */
+ queue_work(qca->workqueue, &qca->ws_awake_rx);
+ spin_unlock_irqrestore(&qca->hci_ibs_lock, flags);
+ return;
+
+ case HCI_IBS_RX_AWAKE:
+ /* Always acknowledge device wake up,
+ * sending IBS message doesn't count as TX ON.
+ */
+ if (send_hci_ibs_cmd(HCI_IBS_WAKE_ACK, hu) < 0) {
+ BT_ERR("Failed to acknowledge device wake up");
+ break;
+ }
+ qca->ibs_sent_wacks++;
+ break;
+
+ default:
+ /* Any other state is illegal */
+ BT_ERR("Received HCI_IBS_WAKE_IND in rx state %d",
+ qca->rx_ibs_state);
+ break;
+ }
+
+ spin_unlock_irqrestore(&qca->hci_ibs_lock, flags);
+
+ /* Actually send the packets */
+ hci_uart_tx_wakeup(hu);
+}
+
+/* Called upon a sleep-indication from the device.
+ */
+static void device_want_to_sleep(struct hci_uart *hu)
+{
+ unsigned long flags;
+ struct qca_data *qca = hu->priv;
+
+ BT_DBG("hu %p want to sleep", hu);
+
+ spin_lock_irqsave(&qca->hci_ibs_lock, flags);
+
+ qca->ibs_recv_slps++;
+
+ switch (qca->rx_ibs_state) {
+ case HCI_IBS_RX_AWAKE:
+ /* Update state */
+ qca->rx_ibs_state = HCI_IBS_RX_ASLEEP;
+ /* Vote off rx clock under workqueue */
+ queue_work(qca->workqueue, &qca->ws_rx_vote_off);
+ break;
+
+ case HCI_IBS_RX_ASLEEP:
+ /* Fall through */
+
+ default:
+ /* Any other state is illegal */
+ BT_ERR("Received HCI_IBS_SLEEP_IND in rx state %d",
+ qca->rx_ibs_state);
+ break;
+ }
+
+ spin_unlock_irqrestore(&qca->hci_ibs_lock, flags);
+}
+
+/* Called upon wake-up-acknowledgement from the device
+ */
+static void device_woke_up(struct hci_uart *hu)
+{
+ unsigned long flags, idle_delay;
+ struct qca_data *qca = hu->priv;
+ struct sk_buff *skb = NULL;
+
+ BT_DBG("hu %p woke up", hu);
+
+ spin_lock_irqsave(&qca->hci_ibs_lock, flags);
+
+ qca->ibs_recv_wacks++;
+
+ switch (qca->tx_ibs_state) {
+ case HCI_IBS_TX_AWAKE:
+ /* Expect one if we send 2 WAKEs */
+ BT_DBG("Received HCI_IBS_WAKE_ACK in tx state %d",
+ qca->tx_ibs_state);
+ break;
+
+ case HCI_IBS_TX_WAKING:
+ /* Send pending packets */
+ while ((skb = skb_dequeue(&qca->tx_wait_q)))
+ skb_queue_tail(&qca->txq, skb);
+
+ /* Switch timers and change state to HCI_IBS_TX_AWAKE */
+ del_timer(&qca->wake_retrans_timer);
+ idle_delay = msecs_to_jiffies(qca->tx_idle_delay);
+ mod_timer(&qca->tx_idle_timer, jiffies + idle_delay);
+ qca->tx_ibs_state = HCI_IBS_TX_AWAKE;
+ break;
+
+ case HCI_IBS_TX_ASLEEP:
+ /* Fall through */
+
+ default:
+ BT_ERR("Received HCI_IBS_WAKE_ACK in tx state %d",
+ qca->tx_ibs_state);
+ break;
+ }
+
+ spin_unlock_irqrestore(&qca->hci_ibs_lock, flags);
+
+ /* Actually send the packets */
+ hci_uart_tx_wakeup(hu);
+}
+
+/* Enqueue frame for transmittion (padding, crc, etc) may be called from
+ * two simultaneous tasklets.
+ */
+static int qca_enqueue(struct hci_uart *hu, struct sk_buff *skb)
+{
+ unsigned long flags = 0, idle_delay;
+ struct qca_data *qca = hu->priv;
+
+ BT_DBG("hu %p qca enq skb %p tx_ibs_state %d", hu, skb,
+ qca->tx_ibs_state);
+
+ /* Prepend skb with frame type */
+ memcpy(skb_push(skb, 1), &bt_cb(skb)->pkt_type, 1);
+
+ /* Don't go to sleep in middle of patch download or
+ * Out-Of-Band(GPIOs control) sleep is selected.
+ */
+ if (!test_bit(STATE_IN_BAND_SLEEP_ENABLED, &qca->flags)) {
+ skb_queue_tail(&qca->txq, skb);
+ return 0;
+ }
+
+ spin_lock_irqsave(&qca->hci_ibs_lock, flags);
+
+ /* Act according to current state */
+ switch (qca->tx_ibs_state) {
+ case HCI_IBS_TX_AWAKE:
+ BT_DBG("Device awake, sending normally");
+ skb_queue_tail(&qca->txq, skb);
+ idle_delay = msecs_to_jiffies(qca->tx_idle_delay);
+ mod_timer(&qca->tx_idle_timer, jiffies + idle_delay);
+ break;
+
+ case HCI_IBS_TX_ASLEEP:
+ BT_DBG("Device asleep, waking up and queueing packet");
+ /* Save packet for later */
+ skb_queue_tail(&qca->tx_wait_q, skb);
+
+ qca->tx_ibs_state = HCI_IBS_TX_WAKING;
+ /* Schedule a work queue to wake up device */
+ queue_work(qca->workqueue, &qca->ws_awake_device);
+ break;
+
+ case HCI_IBS_TX_WAKING:
+ BT_DBG("Device waking up, queueing packet");
+ /* Transient state; just keep packet for later */
+ skb_queue_tail(&qca->tx_wait_q, skb);
+ break;
+
+ default:
+ BT_ERR("Illegal tx state: %d (losing packet)",
+ qca->tx_ibs_state);
+ kfree_skb(skb);
+ break;
+ }
+
+ spin_unlock_irqrestore(&qca->hci_ibs_lock, flags);
+
+ return 0;
+}
+
+static int qca_ibs_sleep_ind(struct hci_dev *hdev, struct sk_buff *skb)
+{
+ struct hci_uart *hu = hci_get_drvdata(hdev);
+
+ BT_DBG("hu %p recv hci ibs cmd 0x%x", hu, HCI_IBS_SLEEP_IND);
+
+ device_want_to_sleep(hu);
+
+ kfree_skb(skb);
+ return 0;
+}
+
+static int qca_ibs_wake_ind(struct hci_dev *hdev, struct sk_buff *skb)
+{
+ struct hci_uart *hu = hci_get_drvdata(hdev);
+
+ BT_DBG("hu %p recv hci ibs cmd 0x%x", hu, HCI_IBS_WAKE_IND);
+
+ device_want_to_wakeup(hu);
+
+ kfree_skb(skb);
+ return 0;
+}
+
+static int qca_ibs_wake_ack(struct hci_dev *hdev, struct sk_buff *skb)
+{
+ struct hci_uart *hu = hci_get_drvdata(hdev);
+
+ BT_DBG("hu %p recv hci ibs cmd 0x%x", hu, HCI_IBS_WAKE_ACK);
+
+ device_woke_up(hu);
+
+ kfree_skb(skb);
+ return 0;
+}
+
+#define QCA_IBS_SLEEP_IND_EVENT \
+ .type = HCI_IBS_SLEEP_IND, \
+ .hlen = 0, \
+ .loff = 0, \
+ .lsize = 0, \
+ .maxlen = HCI_MAX_IBS_SIZE
+
+#define QCA_IBS_WAKE_IND_EVENT \
+ .type = HCI_IBS_WAKE_IND, \
+ .hlen = 0, \
+ .loff = 0, \
+ .lsize = 0, \
+ .maxlen = HCI_MAX_IBS_SIZE
+
+#define QCA_IBS_WAKE_ACK_EVENT \
+ .type = HCI_IBS_WAKE_ACK, \
+ .hlen = 0, \
+ .loff = 0, \
+ .lsize = 0, \
+ .maxlen = HCI_MAX_IBS_SIZE
+
+static const struct h4_recv_pkt qca_recv_pkts[] = {
+ { H4_RECV_ACL, .recv = hci_recv_frame },
+ { H4_RECV_SCO, .recv = hci_recv_frame },
+ { H4_RECV_EVENT, .recv = hci_recv_frame },
+ { QCA_IBS_WAKE_IND_EVENT, .recv = qca_ibs_wake_ind },
+ { QCA_IBS_WAKE_ACK_EVENT, .recv = qca_ibs_wake_ack },
+ { QCA_IBS_SLEEP_IND_EVENT, .recv = qca_ibs_sleep_ind },
+};
+
+static int qca_recv(struct hci_uart *hu, const void *data, int count)
+{
+ struct qca_data *qca = hu->priv;
+
+ if (!test_bit(HCI_UART_REGISTERED, &hu->flags))
+ return -EUNATCH;
+
+ qca->rx_skb = h4_recv_buf(hu->hdev, qca->rx_skb, data, count,
+ qca_recv_pkts, ARRAY_SIZE(qca_recv_pkts));
+ if (IS_ERR(qca->rx_skb)) {
+ int err = PTR_ERR(qca->rx_skb);
+ BT_ERR("%s: Frame reassembly failed (%d)", hu->hdev->name, err);
+ qca->rx_skb = NULL;
+ return err;
+ }
+
+ return count;
+}
+
+static struct sk_buff *qca_dequeue(struct hci_uart *hu)
+{
+ struct qca_data *qca = hu->priv;
+
+ return skb_dequeue(&qca->txq);
+}
+
+static uint8_t qca_get_baudrate_value(int speed)
+{
+ switch(speed) {
+ case 9600:
+ return QCA_BAUDRATE_9600;
+ case 19200:
+ return QCA_BAUDRATE_19200;
+ case 38400:
+ return QCA_BAUDRATE_38400;
+ case 57600:
+ return QCA_BAUDRATE_57600;
+ case 115200:
+ return QCA_BAUDRATE_115200;
+ case 230400:
+ return QCA_BAUDRATE_230400;
+ case 460800:
+ return QCA_BAUDRATE_460800;
+ case 500000:
+ return QCA_BAUDRATE_500000;
+ case 921600:
+ return QCA_BAUDRATE_921600;
+ case 1000000:
+ return QCA_BAUDRATE_1000000;
+ case 2000000:
+ return QCA_BAUDRATE_2000000;
+ case 3000000:
+ return QCA_BAUDRATE_3000000;
+ case 3500000:
+ return QCA_BAUDRATE_3500000;
+ default:
+ return QCA_BAUDRATE_115200;
+ }
+}
+
+static int qca_set_baudrate(struct hci_dev *hdev, uint8_t baudrate)
+{
+ struct hci_uart *hu = hci_get_drvdata(hdev);
+ struct qca_data *qca = hu->priv;
+ struct sk_buff *skb;
+ u8 cmd[] = { 0x01, 0x48, 0xFC, 0x01, 0x00 };
+
+ if (baudrate > QCA_BAUDRATE_3000000)
+ return -EINVAL;
+
+ cmd[4] = baudrate;
+
+ skb = bt_skb_alloc(sizeof(cmd), GFP_ATOMIC);
+ if (!skb) {
+ BT_ERR("Failed to allocate memory for baudrate packet");
+ return -ENOMEM;
+ }
+
+ /* Assign commands to change baudrate and packet type. */
+ memcpy(skb_put(skb, sizeof(cmd)), cmd, sizeof(cmd));
+ bt_cb(skb)->pkt_type = HCI_COMMAND_PKT;
+
+ skb_queue_tail(&qca->txq, skb);
+ hci_uart_tx_wakeup(hu);
+
+ /* wait 300ms to change new baudrate on controller side
+ * controller will come back after they receive this HCI command
+ * then host can communicate with new baudrate to controller
+ */
+ set_current_state(TASK_UNINTERRUPTIBLE);
+ schedule_timeout(msecs_to_jiffies(BAUDRATE_SETTLE_TIMEOUT_MS));
+ set_current_state(TASK_INTERRUPTIBLE);
+
+ return 0;
+}
+
+static int qca_setup(struct hci_uart *hu)
+{
+ struct hci_dev *hdev = hu->hdev;
+ struct qca_data *qca = hu->priv;
+ unsigned int speed, qca_baudrate = QCA_BAUDRATE_115200;
+ int ret;
+
+ BT_INFO("%s: ROME setup", hdev->name);
+
+ /* Patch downloading has to be done without IBS mode */
+ clear_bit(STATE_IN_BAND_SLEEP_ENABLED, &qca->flags);
+
+ /* Setup initial baudrate */
+ speed = 0;
+ if (hu->init_speed)
+ speed = hu->init_speed;
+ else if (hu->proto->init_speed)
+ speed = hu->proto->init_speed;
+
+ if (speed)
+ hci_uart_set_baudrate(hu, speed);
+
+ /* Setup user speed if needed */
+ speed = 0;
+ if (hu->oper_speed)
+ speed = hu->oper_speed;
+ else if (hu->proto->oper_speed)
+ speed = hu->proto->oper_speed;
+
+ if (speed) {
+ qca_baudrate = qca_get_baudrate_value(speed);
+
+ BT_INFO("%s: Set UART speed to %d", hdev->name, speed);
+ ret = qca_set_baudrate(hdev, qca_baudrate);
+ if (ret) {
+ BT_ERR("%s: Failed to change the baud rate (%d)",
+ hdev->name, ret);
+ return ret;
+ }
+ hci_uart_set_baudrate(hu, speed);
+ }
+
+ /* Setup patch / NVM configurations */
+ ret = qca_uart_setup_rome(hdev, qca_baudrate);
+ if (!ret) {
+ set_bit(STATE_IN_BAND_SLEEP_ENABLED, &qca->flags);
+ qca_debugfs_init(hdev);
+ }
+
+ /* Setup bdaddr */
+ hu->hdev->set_bdaddr = qca_set_bdaddr_rome;
+
+ return ret;
+}
+
+static struct hci_uart_proto qca_proto = {
+ .id = HCI_UART_QCA,
+ .name = "QCA",
+ .init_speed = 115200,
+ .oper_speed = 3000000,
+ .open = qca_open,
+ .close = qca_close,
+ .flush = qca_flush,
+ .setup = qca_setup,
+ .recv = qca_recv,
+ .enqueue = qca_enqueue,
+ .dequeue = qca_dequeue,
+};
+
+int __init qca_init(void)
+{
+ return hci_uart_register_proto(&qca_proto);
+}
+
+int __exit qca_deinit(void)
+{
+ return hci_uart_unregister_proto(&qca_proto);
+}
diff --git a/drivers/bluetooth/hci_uart.h b/drivers/bluetooth/hci_uart.h
index ce9c67095..495b9ef52 100644
--- a/drivers/bluetooth/hci_uart.h
+++ b/drivers/bluetooth/hci_uart.h
@@ -35,7 +35,7 @@
#define HCIUARTGETFLAGS _IOR('U', 204, int)
/* UART protocols */
-#define HCI_UART_MAX_PROTO 8
+#define HCI_UART_MAX_PROTO 9
#define HCI_UART_H4 0
#define HCI_UART_BCSP 1
@@ -45,6 +45,7 @@
#define HCI_UART_ATH3K 5
#define HCI_UART_INTEL 6
#define HCI_UART_BCM 7
+#define HCI_UART_QCA 8
#define HCI_UART_RAW_DEVICE 0
#define HCI_UART_RESET_ON_INIT 1
@@ -167,7 +168,17 @@ int h5_init(void);
int h5_deinit(void);
#endif
+#ifdef CONFIG_BT_HCIUART_INTEL
+int intel_init(void);
+int intel_deinit(void);
+#endif
+
#ifdef CONFIG_BT_HCIUART_BCM
int bcm_init(void);
int bcm_deinit(void);
#endif
+
+#ifdef CONFIG_BT_HCIUART_QCA
+int qca_init(void);
+int qca_deinit(void);
+#endif