diff options
Diffstat (limited to 'drivers/clk/bcm/clk-iproc-pll.c')
-rw-r--r-- | drivers/clk/bcm/clk-iproc-pll.c | 41 |
1 files changed, 36 insertions, 5 deletions
diff --git a/drivers/clk/bcm/clk-iproc-pll.c b/drivers/clk/bcm/clk-iproc-pll.c index afd5891ac..fd492a5da 100644 --- a/drivers/clk/bcm/clk-iproc-pll.c +++ b/drivers/clk/bcm/clk-iproc-pll.c @@ -25,6 +25,12 @@ #define PLL_VCO_HIGH_SHIFT 19 #define PLL_VCO_LOW_SHIFT 30 +/* + * PLL MACRO_SELECT modes 0 to 5 choose pre-calculated PLL output frequencies + * from a look-up table. Mode 7 allows user to manipulate PLL clock dividers + */ +#define PLL_USER_MODE 7 + /* number of delay loops waiting for PLL to lock */ #define LOCK_DELAY 100 @@ -215,7 +221,10 @@ static void __pll_put_in_reset(struct iproc_pll *pll) const struct iproc_pll_reset_ctrl *reset = &ctrl->reset; val = readl(pll->control_base + reset->offset); - val &= ~(1 << reset->reset_shift | 1 << reset->p_reset_shift); + if (ctrl->flags & IPROC_CLK_PLL_RESET_ACTIVE_LOW) + val |= BIT(reset->reset_shift) | BIT(reset->p_reset_shift); + else + val &= ~(BIT(reset->reset_shift) | BIT(reset->p_reset_shift)); iproc_pll_write(pll, pll->control_base, reset->offset, val); } @@ -236,7 +245,10 @@ static void __pll_bring_out_reset(struct iproc_pll *pll, unsigned int kp, iproc_pll_write(pll, pll->control_base, dig_filter->offset, val); val = readl(pll->control_base + reset->offset); - val |= 1 << reset->reset_shift | 1 << reset->p_reset_shift; + if (ctrl->flags & IPROC_CLK_PLL_RESET_ACTIVE_LOW) + val &= ~(BIT(reset->reset_shift) | BIT(reset->p_reset_shift)); + else + val |= BIT(reset->reset_shift) | BIT(reset->p_reset_shift); iproc_pll_write(pll, pll->control_base, reset->offset, val); } @@ -292,6 +304,16 @@ static int pll_set_rate(struct iproc_clk *clk, unsigned int rate_index, /* put PLL in reset */ __pll_put_in_reset(pll); + /* set PLL in user mode before modifying PLL controls */ + if (ctrl->flags & IPROC_CLK_PLL_USER_MODE_ON) { + val = readl(pll->control_base + ctrl->macro_mode.offset); + val &= ~(bit_mask(ctrl->macro_mode.width) << + ctrl->macro_mode.shift); + val |= PLL_USER_MODE << ctrl->macro_mode.shift; + iproc_pll_write(pll, pll->control_base, + ctrl->macro_mode.offset, val); + } + iproc_pll_write(pll, pll->control_base, ctrl->vco_ctrl.u_offset, 0); val = readl(pll->control_base + ctrl->vco_ctrl.l_offset); @@ -505,7 +527,10 @@ static unsigned long iproc_clk_recalc_rate(struct clk_hw *hw, if (mdiv == 0) mdiv = 256; - clk->rate = parent_rate / mdiv; + if (ctrl->flags & IPROC_CLK_MCLK_DIV_BY_2) + clk->rate = parent_rate / (mdiv * 2); + else + clk->rate = parent_rate / mdiv; return clk->rate; } @@ -543,7 +568,10 @@ static int iproc_clk_set_rate(struct clk_hw *hw, unsigned long rate, if (rate == 0 || parent_rate == 0) return -EINVAL; - div = DIV_ROUND_UP(parent_rate, rate); + if (ctrl->flags & IPROC_CLK_MCLK_DIV_BY_2) + div = DIV_ROUND_UP(parent_rate, rate * 2); + else + div = DIV_ROUND_UP(parent_rate, rate); if (div > 256) return -EINVAL; @@ -555,7 +583,10 @@ static int iproc_clk_set_rate(struct clk_hw *hw, unsigned long rate, val |= div << ctrl->mdiv.shift; } iproc_pll_write(pll, pll->control_base, ctrl->mdiv.offset, val); - clk->rate = parent_rate / div; + if (ctrl->flags & IPROC_CLK_MCLK_DIV_BY_2) + clk->rate = parent_rate / (div * 2); + else + clk->rate = parent_rate / div; return 0; } |