diff options
Diffstat (limited to 'drivers/clk/tegra/clk-tegra30.c')
| -rw-r--r-- | drivers/clk/tegra/clk-tegra30.c | 113 |
1 files changed, 2 insertions, 111 deletions
diff --git a/drivers/clk/tegra/clk-tegra30.c b/drivers/clk/tegra/clk-tegra30.c index 9396f4930..8e2db5ead 100644 --- a/drivers/clk/tegra/clk-tegra30.c +++ b/drivers/clk/tegra/clk-tegra30.c @@ -118,20 +118,6 @@ #define AUDIO_SYNC_DOUBLER 0x49c -#define UTMIP_PLL_CFG2 0x488 -#define UTMIP_PLL_CFG2_STABLE_COUNT(x) (((x) & 0xffff) << 6) -#define UTMIP_PLL_CFG2_ACTIVE_DLY_COUNT(x) (((x) & 0x3f) << 18) -#define UTMIP_PLL_CFG2_FORCE_PD_SAMP_A_POWERDOWN BIT(0) -#define UTMIP_PLL_CFG2_FORCE_PD_SAMP_B_POWERDOWN BIT(2) -#define UTMIP_PLL_CFG2_FORCE_PD_SAMP_C_POWERDOWN BIT(4) - -#define UTMIP_PLL_CFG1 0x484 -#define UTMIP_PLL_CFG1_ENABLE_DLY_COUNT(x) (((x) & 0x1f) << 6) -#define UTMIP_PLL_CFG1_XTAL_FREQ_COUNT(x) (((x) & 0xfff) << 0) -#define UTMIP_PLL_CFG1_FORCE_PLL_ENABLE_POWERDOWN BIT(14) -#define UTMIP_PLL_CFG1_FORCE_PLL_ACTIVE_POWERDOWN BIT(12) -#define UTMIP_PLL_CFG1_FORCE_PLLU_POWERDOWN BIT(16) - /* Tegra CPU clock and reset control regs */ #define TEGRA_CLK_RST_CONTROLLER_CLK_CPU_CMPLX 0x4c #define TEGRA_CLK_RST_CONTROLLER_RST_CPU_CMPLX_SET 0x340 @@ -207,46 +193,6 @@ static DEFINE_SPINLOCK(emc_lock); static struct clk **clks; -/* - * Structure defining the fields for USB UTMI clocks Parameters. - */ -struct utmi_clk_param { - /* Oscillator Frequency in KHz */ - u32 osc_frequency; - /* UTMIP PLL Enable Delay Count */ - u8 enable_delay_count; - /* UTMIP PLL Stable count */ - u8 stable_count; - /* UTMIP PLL Active delay count */ - u8 active_delay_count; - /* UTMIP PLL Xtal frequency count */ - u8 xtal_freq_count; -}; - -static const struct utmi_clk_param utmi_parameters[] = { - { - .osc_frequency = 13000000, .enable_delay_count = 0x02, - .stable_count = 0x33, .active_delay_count = 0x05, - .xtal_freq_count = 0x7f - }, { - .osc_frequency = 19200000, .enable_delay_count = 0x03, - .stable_count = 0x4b, .active_delay_count = 0x06, - .xtal_freq_count = 0xbb - }, { - .osc_frequency = 12000000, .enable_delay_count = 0x02, - .stable_count = 0x2f, .active_delay_count = 0x04, - .xtal_freq_count = 0x76 - }, { - .osc_frequency = 26000000, .enable_delay_count = 0x04, - .stable_count = 0x66, .active_delay_count = 0x09, - .xtal_freq_count = 0xfe - }, { - .osc_frequency = 16800000, .enable_delay_count = 0x03, - .stable_count = 0x41, .active_delay_count = 0x0a, - .xtal_freq_count = 0xa4 - }, -}; - static struct tegra_clk_pll_freq_table pll_c_freq_table[] = { { 12000000, 1040000000, 520, 6, 1, 8 }, { 13000000, 1040000000, 480, 6, 1, 8 }, @@ -873,59 +819,6 @@ static struct tegra_clk tegra30_clks[tegra_clk_max] __initdata = { [tegra_clk_pll_a_out0] = { .dt_id = TEGRA30_CLK_PLL_A_OUT0, .present = true }, }; -static void tegra30_utmi_param_configure(void) -{ - unsigned int i; - u32 reg; - - for (i = 0; i < ARRAY_SIZE(utmi_parameters); i++) { - if (input_freq == utmi_parameters[i].osc_frequency) - break; - } - - if (i >= ARRAY_SIZE(utmi_parameters)) { - pr_err("%s: Unexpected input rate %lu\n", __func__, input_freq); - return; - } - - reg = readl_relaxed(clk_base + UTMIP_PLL_CFG2); - - /* Program UTMIP PLL stable and active counts */ - reg &= ~UTMIP_PLL_CFG2_STABLE_COUNT(~0); - reg |= UTMIP_PLL_CFG2_STABLE_COUNT( - utmi_parameters[i].stable_count); - - reg &= ~UTMIP_PLL_CFG2_ACTIVE_DLY_COUNT(~0); - - reg |= UTMIP_PLL_CFG2_ACTIVE_DLY_COUNT( - utmi_parameters[i].active_delay_count); - - /* Remove power downs from UTMIP PLL control bits */ - reg &= ~UTMIP_PLL_CFG2_FORCE_PD_SAMP_A_POWERDOWN; - reg &= ~UTMIP_PLL_CFG2_FORCE_PD_SAMP_B_POWERDOWN; - reg &= ~UTMIP_PLL_CFG2_FORCE_PD_SAMP_C_POWERDOWN; - - writel_relaxed(reg, clk_base + UTMIP_PLL_CFG2); - - /* Program UTMIP PLL delay and oscillator frequency counts */ - reg = readl_relaxed(clk_base + UTMIP_PLL_CFG1); - reg &= ~UTMIP_PLL_CFG1_ENABLE_DLY_COUNT(~0); - - reg |= UTMIP_PLL_CFG1_ENABLE_DLY_COUNT( - utmi_parameters[i].enable_delay_count); - - reg &= ~UTMIP_PLL_CFG1_XTAL_FREQ_COUNT(~0); - reg |= UTMIP_PLL_CFG1_XTAL_FREQ_COUNT( - utmi_parameters[i].xtal_freq_count); - - /* Remove power downs from UTMIP PLL control bits */ - reg &= ~UTMIP_PLL_CFG1_FORCE_PLL_ENABLE_POWERDOWN; - reg &= ~UTMIP_PLL_CFG1_FORCE_PLL_ACTIVE_POWERDOWN; - reg &= ~UTMIP_PLL_CFG1_FORCE_PLLU_POWERDOWN; - - writel_relaxed(reg, clk_base + UTMIP_PLL_CFG1); -} - static const char *pll_e_parents[] = { "pll_ref", "pll_p" }; static void __init tegra30_pll_init(void) @@ -972,12 +865,10 @@ static void __init tegra30_pll_init(void) clks[TEGRA30_CLK_PLL_X_OUT0] = clk; /* PLLU */ - clk = tegra_clk_register_pll("pll_u", "pll_ref", clk_base, pmc_base, 0, - &pll_u_params, NULL); + clk = tegra_clk_register_pllu("pll_u", "pll_ref", clk_base, 0, + &pll_u_params, NULL); clks[TEGRA30_CLK_PLL_U] = clk; - tegra30_utmi_param_configure(); - /* PLLD */ clk = tegra_clk_register_pll("pll_d", "pll_ref", clk_base, pmc_base, 0, &pll_d_params, &pll_d_lock); |