21 files changed, 398 insertions, 49 deletions

diff --git a/drivers/clocksource/Kconfig b/drivers/clocksource/Kconfig
index a7726db13..2eb5f0efa 100644
--- a/drivers/clocksource/Kconfig
+++ b/drivers/clocksource/Kconfig
@@ -1,7 +1,16 @@
 menu "Clock Source drivers"
+	depends on !ARCH_USES_GETTIMEOFFSET
 
 config CLKSRC_OF
 	bool
+	select CLKSRC_PROBE
+
+config CLKSRC_ACPI
+	bool
+	select CLKSRC_PROBE
+
+config CLKSRC_PROBE
+	bool
 
 config CLKSRC_I8253
 	bool
@@ -115,6 +124,14 @@ config CLKSRC_PISTACHIO
 	bool
 	select CLKSRC_OF
 
+config CLKSRC_TI_32K
+	bool "Texas Instruments 32.768 Hz Clocksource" if COMPILE_TEST
+	depends on GENERIC_SCHED_CLOCK
+	select CLKSRC_OF if OF
+	help
+	  This option enables support for Texas Instruments 32.768 Hz clocksource
+	  available on many OMAP-like platforms.
+
 config CLKSRC_STM32
 	bool "Clocksource for STM32 SoCs" if !ARCH_STM32
 	depends on OF && ARM && (ARCH_STM32 || COMPILE_TEST)
@@ -123,6 +140,7 @@ config CLKSRC_STM32
 config ARM_ARCH_TIMER
 	bool
 	select CLKSRC_OF if OF
+	select CLKSRC_ACPI if ACPI
 
 config ARM_ARCH_TIMER_EVTSTREAM
 	bool "Support for ARM architected timer event stream generation"
@@ -279,6 +297,10 @@ config CLKSRC_MIPS_GIC
 	depends on MIPS_GIC
 	select CLKSRC_OF
 
+config CLKSRC_TANGO_XTAL
+	bool
+	select CLKSRC_OF
+
 config CLKSRC_PXA
 	def_bool y if ARCH_PXA || ARCH_SA1100
 	select CLKSRC_OF if OF
diff --git a/drivers/clocksource/Makefile b/drivers/clocksource/Makefile
index 5c00863c3..56bd16e77 100644
--- a/drivers/clocksource/Makefile
+++ b/drivers/clocksource/Makefile
@@ -1,4 +1,4 @@
-obj-$(CONFIG_CLKSRC_OF)	+= clksrc-of.o
+obj-$(CONFIG_CLKSRC_PROBE)	+= clksrc-probe.o
 obj-$(CONFIG_ATMEL_PIT)		+= timer-atmel-pit.o
 obj-$(CONFIG_ATMEL_ST)		+= timer-atmel-st.o
 obj-$(CONFIG_ATMEL_TCB_CLKSRC)	+= tcb_clksrc.o
@@ -45,6 +45,7 @@ obj-$(CONFIG_VF_PIT_TIMER)	+= vf_pit_timer.o
 obj-$(CONFIG_CLKSRC_QCOM)	+= qcom-timer.o
 obj-$(CONFIG_MTK_TIMER)		+= mtk_timer.o
 obj-$(CONFIG_CLKSRC_PISTACHIO)	+= time-pistachio.o
+obj-$(CONFIG_CLKSRC_TI_32K)	+= timer-ti-32k.o
 
 obj-$(CONFIG_ARM_ARCH_TIMER)		+= arm_arch_timer.o
 obj-$(CONFIG_ARM_GLOBAL_TIMER)		+= arm_global_timer.o
@@ -56,9 +57,11 @@ obj-$(CONFIG_ARCH_KEYSTONE)		+= timer-keystone.o
 obj-$(CONFIG_ARCH_INTEGRATOR_AP)	+= timer-integrator-ap.o
 obj-$(CONFIG_CLKSRC_VERSATILE)		+= versatile.o
 obj-$(CONFIG_CLKSRC_MIPS_GIC)		+= mips-gic-timer.o
+obj-$(CONFIG_CLKSRC_TANGO_XTAL)		+= tango_xtal.o
 obj-$(CONFIG_CLKSRC_IMX_GPT)		+= timer-imx-gpt.o
 obj-$(CONFIG_ASM9260_TIMER)		+= asm9260_timer.o
 obj-$(CONFIG_H8300)			+= h8300_timer8.o
 obj-$(CONFIG_H8300_TMR16)		+= h8300_timer16.o
 obj-$(CONFIG_H8300_TPU)			+= h8300_tpu.o
 obj-$(CONFIG_CLKSRC_ST_LPC)		+= clksrc_st_lpc.o
+obj-$(CONFIG_X86_NUMACHIP)		+= numachip.o
diff --git a/drivers/clocksource/arm_arch_timer.c b/drivers/clocksource/arm_arch_timer.c
index d6e3e4939..c64d543d6 100644
--- a/drivers/clocksource/arm_arch_timer.c
+++ b/drivers/clocksource/arm_arch_timer.c
@@ -864,13 +864,5 @@ static int __init arch_timer_acpi_init(struct acpi_table_header *table)
 	arch_timer_init();
 	return 0;
 }
-
-/* Initialize all the generic timers presented in GTDT */
-void __init acpi_generic_timer_init(void)
-{
-	if (acpi_disabled)
-		return;
-
-	acpi_table_parse(ACPI_SIG_GTDT, arch_timer_acpi_init);
-}
+CLOCKSOURCE_ACPI_DECLARE(arch_timer, ACPI_SIG_GTDT, arch_timer_acpi_init);
 #endif
diff --git a/drivers/clocksource/clksrc-of.c b/drivers/clocksource/clksrc-probe.c
index 0093a8e49..7cb6c923a 100644
--- a/drivers/clocksource/clksrc-of.c
+++ b/drivers/clocksource/clksrc-probe.c
@@ -14,6 +14,7 @@
  * along with this program.  If not, see <http://www.gnu.org/licenses/>.
  */
 
+#include <linux/acpi.h>
 #include <linux/init.h>
 #include <linux/of.h>
 #include <linux/clocksource.h>
@@ -23,7 +24,7 @@ extern struct of_device_id __clksrc_of_table[];
 static const struct of_device_id __clksrc_of_table_sentinel
 	__used __section(__clksrc_of_table_end);
 
-void __init clocksource_of_init(void)
+void __init clocksource_probe(void)
 {
 	struct device_node *np;
 	const struct of_device_id *match;
@@ -38,6 +39,9 @@ void __init clocksource_of_init(void)
 		init_func(np);
 		clocksources++;
 	}
+
+	clocksources += acpi_probe_device_table(clksrc);
+
 	if (!clocksources)
 		pr_crit("%s: no matching clocksources found\n", __func__);
 }
diff --git a/drivers/clocksource/em_sti.c b/drivers/clocksource/em_sti.c
index 7a97a34db..19bb1792d 100644
--- a/drivers/clocksource/em_sti.c
+++ b/drivers/clocksource/em_sti.c
@@ -228,7 +228,6 @@ static int em_sti_register_clocksource(struct em_sti_priv *p)
 {
 	struct clocksource *cs = &p->cs;
 
-	memset(cs, 0, sizeof(*cs));
 	cs->name = dev_name(&p->pdev->dev);
 	cs->rating = 200;
 	cs->read = em_sti_clocksource_read;
@@ -285,7 +284,6 @@ static void em_sti_register_clockevent(struct em_sti_priv *p)
 {
 	struct clock_event_device *ced = &p->ced;
 
-	memset(ced, 0, sizeof(*ced));
 	ced->name = dev_name(&p->pdev->dev);
 	ced->features = CLOCK_EVT_FEAT_ONESHOT;
 	ced->rating = 200;
diff --git a/drivers/clocksource/exynos_mct.c b/drivers/clocksource/exynos_mct.c
index 029f96ab1..ff44082a0 100644
--- a/drivers/clocksource/exynos_mct.c
+++ b/drivers/clocksource/exynos_mct.c
@@ -382,24 +382,28 @@ static void exynos4_mct_tick_start(unsigned long cycles,
 static int exynos4_tick_set_next_event(unsigned long cycles,
 				       struct clock_event_device *evt)
 {
-	struct mct_clock_event_device *mevt = this_cpu_ptr(&percpu_mct_tick);
+	struct mct_clock_event_device *mevt;
 
+	mevt = container_of(evt, struct mct_clock_event_device, evt);
 	exynos4_mct_tick_start(cycles, mevt);
-
 	return 0;
 }
 
 static int set_state_shutdown(struct clock_event_device *evt)
 {
-	exynos4_mct_tick_stop(this_cpu_ptr(&percpu_mct_tick));
+	struct mct_clock_event_device *mevt;
+
+	mevt = container_of(evt, struct mct_clock_event_device, evt);
+	exynos4_mct_tick_stop(mevt);
 	return 0;
 }
 
 static int set_state_periodic(struct clock_event_device *evt)
 {
-	struct mct_clock_event_device *mevt = this_cpu_ptr(&percpu_mct_tick);
+	struct mct_clock_event_device *mevt;
 	unsigned long cycles_per_jiffy;
 
+	mevt = container_of(evt, struct mct_clock_event_device, evt);
 	cycles_per_jiffy = (((unsigned long long)NSEC_PER_SEC / HZ * evt->mult)
 			    >> evt->shift);
 	exynos4_mct_tick_stop(mevt);
diff --git a/drivers/clocksource/fsl_ftm_timer.c b/drivers/clocksource/fsl_ftm_timer.c
index 10202f1fd..517e1c762 100644
--- a/drivers/clocksource/fsl_ftm_timer.c
+++ b/drivers/clocksource/fsl_ftm_timer.c
@@ -203,7 +203,7 @@ static int __init ftm_clockevent_init(unsigned long freq, int irq)
 	int err;
 
 	ftm_writel(0x00, priv->clkevt_base + FTM_CNTIN);
-	ftm_writel(~0UL, priv->clkevt_base + FTM_MOD);
+	ftm_writel(~0u, priv->clkevt_base + FTM_MOD);
 
 	ftm_reset_counter(priv->clkevt_base);
 
@@ -230,7 +230,7 @@ static int __init ftm_clocksource_init(unsigned long freq)
 	int err;
 
 	ftm_writel(0x00, priv->clksrc_base + FTM_CNTIN);
-	ftm_writel(~0UL, priv->clksrc_base + FTM_MOD);
+	ftm_writel(~0u, priv->clksrc_base + FTM_MOD);
 
 	ftm_reset_counter(priv->clksrc_base);
 
diff --git a/drivers/clocksource/h8300_timer16.c b/drivers/clocksource/h8300_timer16.c
index 82941c1e9..0e076c6fc 100644
--- a/drivers/clocksource/h8300_timer16.c
+++ b/drivers/clocksource/h8300_timer16.c
@@ -153,7 +153,6 @@ static int timer16_setup(struct timer16_priv *p, struct platform_device *pdev)
 	int ret, irq;
 	unsigned int ch;
 
-	memset(p, 0, sizeof(*p));
 	p->pdev = pdev;
 
 	res[REG_CH] = platform_get_resource(p->pdev,
diff --git a/drivers/clocksource/h8300_timer8.c b/drivers/clocksource/h8300_timer8.c
index f9b3b7033..44375d8b9 100644
--- a/drivers/clocksource/h8300_timer8.c
+++ b/drivers/clocksource/h8300_timer8.c
@@ -215,7 +215,6 @@ static int timer8_setup(struct timer8_priv *p,
 	int irq;
 	int ret;
 
-	memset(p, 0, sizeof(*p));
 	p->pdev = pdev;
 
 	res = platform_get_resource(p->pdev, IORESOURCE_MEM, 0);
diff --git a/drivers/clocksource/h8300_tpu.c b/drivers/clocksource/h8300_tpu.c
index 64195fdd7..5487410bf 100644
--- a/drivers/clocksource/h8300_tpu.c
+++ b/drivers/clocksource/h8300_tpu.c
@@ -123,7 +123,6 @@ static int __init tpu_setup(struct tpu_priv *p, struct platform_device *pdev)
 {
 	struct resource *res[2];
 
-	memset(p, 0, sizeof(*p));
 	p->pdev = pdev;
 
 	res[CH_L] = platform_get_resource(p->pdev, IORESOURCE_MEM, CH_L);
diff --git a/drivers/clocksource/mips-gic-timer.c b/drivers/clocksource/mips-gic-timer.c
index 02a1945e5..89d3e4d79 100644
--- a/drivers/clocksource/mips-gic-timer.c
+++ b/drivers/clocksource/mips-gic-timer.c
@@ -140,9 +140,10 @@ static cycle_t gic_hpt_read(struct clocksource *cs)
 }
 
 static struct clocksource gic_clocksource = {
-	.name	= "GIC",
-	.read	= gic_hpt_read,
-	.flags	= CLOCK_SOURCE_IS_CONTINUOUS,
+	.name		= "GIC",
+	.read		= gic_hpt_read,
+	.flags		= CLOCK_SOURCE_IS_CONTINUOUS,
+	.archdata	= { .vdso_clock_mode = VDSO_CLOCK_GIC },
 };
 
 static void __init __gic_clocksource_init(void)
diff --git a/drivers/clocksource/mmio.c b/drivers/clocksource/mmio.c
index 1593ade2a..c4f7d7a9b 100644
--- a/drivers/clocksource/mmio.c
+++ b/drivers/clocksource/mmio.c
@@ -55,7 +55,7 @@ int __init clocksource_mmio_init(void __iomem *base, const char *name,
 {
 	struct clocksource_mmio *cs;
 
-	if (bits > 32 || bits < 16)
+	if (bits > 64 || bits < 16)
 		return -EINVAL;
 
 	cs = kzalloc(sizeof(struct clocksource_mmio), GFP_KERNEL);
diff --git a/drivers/clocksource/mtk_timer.c b/drivers/clocksource/mtk_timer.c
index 50f0641c6..fbfc74685 100644
--- a/drivers/clocksource/mtk_timer.c
+++ b/drivers/clocksource/mtk_timer.c
@@ -24,6 +24,7 @@
 #include <linux/of.h>
 #include <linux/of_address.h>
 #include <linux/of_irq.h>
+#include <linux/sched_clock.h>
 #include <linux/slab.h>
 
 #define GPT_IRQ_EN_REG		0x00
@@ -59,6 +60,13 @@ struct mtk_clock_event_device {
 	struct clock_event_device dev;
 };
 
+static void __iomem *gpt_sched_reg __read_mostly;
+
+static u64 notrace mtk_read_sched_clock(void)
+{
+	return readl_relaxed(gpt_sched_reg);
+}
+
 static inline struct mtk_clock_event_device *to_mtk_clk(
 				struct clock_event_device *c)
 {
@@ -141,14 +149,6 @@ static irqreturn_t mtk_timer_interrupt(int irq, void *dev_id)
 	return IRQ_HANDLED;
 }
 
-static void mtk_timer_global_reset(struct mtk_clock_event_device *evt)
-{
-	/* Disable all interrupts */
-	writel(0x0, evt->gpt_base + GPT_IRQ_EN_REG);
-	/* Acknowledge all interrupts */
-	writel(0x3f, evt->gpt_base + GPT_IRQ_ACK_REG);
-}
-
 static void
 mtk_timer_setup(struct mtk_clock_event_device *evt, u8 timer, u8 option)
 {
@@ -168,6 +168,12 @@ static void mtk_timer_enable_irq(struct mtk_clock_event_device *evt, u8 timer)
 {
 	u32 val;
 
+	/* Disable all interrupts */
+	writel(0x0, evt->gpt_base + GPT_IRQ_EN_REG);
+
+	/* Acknowledge all spurious pending interrupts */
+	writel(0x3f, evt->gpt_base + GPT_IRQ_ACK_REG);
+
 	val = readl(evt->gpt_base + GPT_IRQ_EN_REG);
 	writel(val | GPT_IRQ_ENABLE(timer),
 			evt->gpt_base + GPT_IRQ_EN_REG);
@@ -220,8 +226,6 @@ static void __init mtk_timer_init(struct device_node *node)
 	}
 	rate = clk_get_rate(clk);
 
-	mtk_timer_global_reset(evt);
-
 	if (request_irq(evt->dev.irq, mtk_timer_interrupt,
 			IRQF_TIMER | IRQF_IRQPOLL, "mtk_timer", evt)) {
 		pr_warn("failed to setup irq %d\n", evt->dev.irq);
@@ -234,6 +238,8 @@ static void __init mtk_timer_init(struct device_node *node)
 	mtk_timer_setup(evt, GPT_CLK_SRC, TIMER_CTRL_OP_FREERUN);
 	clocksource_mmio_init(evt->gpt_base + TIMER_CNT_REG(GPT_CLK_SRC),
 			node->name, rate, 300, 32, clocksource_mmio_readl_up);
+	gpt_sched_reg = evt->gpt_base + TIMER_CNT_REG(GPT_CLK_SRC);
+	sched_clock_register(mtk_read_sched_clock, 32, rate);
 
 	/* Configure clock event */
 	mtk_timer_setup(evt, GPT_CLK_EVT, TIMER_CTRL_OP_REPEAT);
diff --git a/drivers/clocksource/numachip.c b/drivers/clocksource/numachip.c
new file mode 100644
index 000000000..4e0f11fd2
--- /dev/null
+++ b/drivers/clocksource/numachip.c
@@ -0,0 +1,95 @@
+/*
+ *
+ * Copyright (C) 2015 Numascale AS. All rights reserved.
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#include <linux/clockchips.h>
+
+#include <asm/irq.h>
+#include <asm/numachip/numachip.h>
+#include <asm/numachip/numachip_csr.h>
+
+static DEFINE_PER_CPU(struct clock_event_device, numachip2_ced);
+
+static cycles_t numachip2_timer_read(struct clocksource *cs)
+{
+	return numachip2_read64_lcsr(NUMACHIP2_TIMER_NOW);
+}
+
+static struct clocksource numachip2_clocksource = {
+	.name            = "numachip2",
+	.rating          = 295,
+	.read            = numachip2_timer_read,
+	.mask            = CLOCKSOURCE_MASK(64),
+	.flags           = CLOCK_SOURCE_IS_CONTINUOUS,
+	.mult            = 1,
+	.shift           = 0,
+};
+
+static int numachip2_set_next_event(unsigned long delta, struct clock_event_device *ced)
+{
+	numachip2_write64_lcsr(NUMACHIP2_TIMER_DEADLINE + numachip2_timer(),
+		delta);
+	return 0;
+}
+
+static struct clock_event_device numachip2_clockevent = {
+	.name            = "numachip2",
+	.rating          = 400,
+	.set_next_event  = numachip2_set_next_event,
+	.features        = CLOCK_EVT_FEAT_ONESHOT,
+	.mult            = 1,
+	.shift           = 0,
+	.min_delta_ns    = 1250,
+	.max_delta_ns    = LONG_MAX,
+};
+
+static void numachip_timer_interrupt(void)
+{
+	struct clock_event_device *ced = this_cpu_ptr(&numachip2_ced);
+
+	ced->event_handler(ced);
+}
+
+static __init void numachip_timer_each(struct work_struct *work)
+{
+	unsigned local_apicid = __this_cpu_read(x86_cpu_to_apicid) & 0xff;
+	struct clock_event_device *ced = this_cpu_ptr(&numachip2_ced);
+
+	/* Setup IPI vector to local core and relative timing mode */
+	numachip2_write64_lcsr(NUMACHIP2_TIMER_INT + numachip2_timer(),
+		(3 << 22) | (X86_PLATFORM_IPI_VECTOR << 14) |
+		(local_apicid << 6));
+
+	*ced = numachip2_clockevent;
+	ced->cpumask = cpumask_of(smp_processor_id());
+	clockevents_register_device(ced);
+}
+
+static int __init numachip_timer_init(void)
+{
+	if (numachip_system != 2)
+		return -ENODEV;
+
+	/* Reset timer */
+	numachip2_write64_lcsr(NUMACHIP2_TIMER_RESET, 0);
+	clocksource_register_hz(&numachip2_clocksource, NSEC_PER_SEC);
+
+	/* Setup per-cpu clockevents */
+	x86_platform_ipi_callback = numachip_timer_interrupt;
+	schedule_on_each_cpu(&numachip_timer_each);
+
+	return 0;
+}
+
+arch_initcall(numachip_timer_init);
diff --git a/drivers/clocksource/sh_cmt.c b/drivers/clocksource/sh_cmt.c
index ba73a6eb8..103c49362 100644
--- a/drivers/clocksource/sh_cmt.c
+++ b/drivers/clocksource/sh_cmt.c
@@ -962,7 +962,6 @@ static int sh_cmt_setup(struct sh_cmt_device *cmt, struct platform_device *pdev)
 	unsigned int i;
 	int ret;
 
-	memset(cmt, 0, sizeof(*cmt));
 	cmt->pdev = pdev;
 	raw_spin_lock_init(&cmt->lock);
 
diff --git a/drivers/clocksource/tango_xtal.c b/drivers/clocksource/tango_xtal.c
new file mode 100644
index 000000000..d297b30d2
--- /dev/null
+++ b/drivers/clocksource/tango_xtal.c
@@ -0,0 +1,66 @@
+#include <linux/clocksource.h>
+#include <linux/sched_clock.h>
+#include <linux/of_address.h>
+#include <linux/printk.h>
+#include <linux/delay.h>
+#include <linux/init.h>
+#include <linux/clk.h>
+
+static void __iomem *xtal_in_cnt;
+static struct delay_timer delay_timer;
+
+static unsigned long notrace read_xtal_counter(void)
+{
+	return readl_relaxed(xtal_in_cnt);
+}
+
+static u64 notrace read_sched_clock(void)
+{
+	return read_xtal_counter();
+}
+
+static cycle_t read_clocksource(struct clocksource *cs)
+{
+	return read_xtal_counter();
+}
+
+static struct clocksource tango_xtal = {
+	.name	= "tango-xtal",
+	.rating	= 350,
+	.read	= read_clocksource,
+	.mask	= CLOCKSOURCE_MASK(32),
+	.flags	= CLOCK_SOURCE_IS_CONTINUOUS,
+};
+
+static void __init tango_clocksource_init(struct device_node *np)
+{
+	struct clk *clk;
+	int xtal_freq, ret;
+
+	xtal_in_cnt = of_iomap(np, 0);
+	if (xtal_in_cnt == NULL) {
+		pr_err("%s: invalid address\n", np->full_name);
+		return;
+	}
+
+	clk = of_clk_get(np, 0);
+	if (IS_ERR(clk)) {
+		pr_err("%s: invalid clock\n", np->full_name);
+		return;
+	}
+
+	xtal_freq = clk_get_rate(clk);
+	delay_timer.freq = xtal_freq;
+	delay_timer.read_current_timer = read_xtal_counter;
+
+	ret = clocksource_register_hz(&tango_xtal, xtal_freq);
+	if (ret != 0) {
+		pr_err("%s: registration failed\n", np->full_name);
+		return;
+	}
+
+	sched_clock_register(read_sched_clock, 32, xtal_freq);
+	register_current_timer_delay(&delay_timer);
+}
+
+CLOCKSOURCE_OF_DECLARE(tango, "sigma,tick-counter", tango_clocksource_init);
diff --git a/drivers/clocksource/tcb_clksrc.c b/drivers/clocksource/tcb_clksrc.c
index d28d2fe79..6ee914019 100644
--- a/drivers/clocksource/tcb_clksrc.c
+++ b/drivers/clocksource/tcb_clksrc.c
@@ -193,10 +193,17 @@ static int __init setup_clkevents(struct atmel_tc *tc, int clk32k_divisor_idx)
 	struct clk *t2_clk = tc->clk[2];
 	int irq = tc->irq[2];
 
+	ret = clk_prepare_enable(tc->slow_clk);
+	if (ret)
+		return ret;
+
 	/* try to enable t2 clk to avoid future errors in mode change */
 	ret = clk_prepare_enable(t2_clk);
-	if (ret)
+	if (ret) {
+		clk_disable_unprepare(tc->slow_clk);
 		return ret;
+	}
+
 	clk_disable(t2_clk);
 
 	clkevt.regs = tc->regs;
@@ -208,7 +215,8 @@ static int __init setup_clkevents(struct atmel_tc *tc, int clk32k_divisor_idx)
 
 	ret = request_irq(irq, ch2_irq, IRQF_TIMER, "tc_clkevt", &clkevt);
 	if (ret) {
-		clk_disable_unprepare(t2_clk);
+		clk_unprepare(t2_clk);
+		clk_disable_unprepare(tc->slow_clk);
 		return ret;
 	}
 
diff --git a/drivers/clocksource/time-armada-370-xp.c b/drivers/clocksource/time-armada-370-xp.c
index 2162796fd..d93ec3c4f 100644
--- a/drivers/clocksource/time-armada-370-xp.c
+++ b/drivers/clocksource/time-armada-370-xp.c
@@ -45,6 +45,8 @@
 #include <linux/percpu.h>
 #include <linux/syscore_ops.h>
 
+#include <asm/delay.h>
+
 /*
  * Timer block registers.
  */
@@ -249,6 +251,15 @@ struct syscore_ops armada_370_xp_timer_syscore_ops = {
 	.resume		= armada_370_xp_timer_resume,
 };
 
+static unsigned long armada_370_delay_timer_read(void)
+{
+	return ~readl(timer_base + TIMER0_VAL_OFF);
+}
+
+static struct delay_timer armada_370_delay_timer = {
+	.read_current_timer = armada_370_delay_timer_read,
+};
+
 static void __init armada_370_xp_timer_common_init(struct device_node *np)
 {
 	u32 clr = 0, set = 0;
@@ -287,6 +298,9 @@ static void __init armada_370_xp_timer_common_init(struct device_node *np)
 		TIMER0_RELOAD_EN | enable_mask,
 		TIMER0_RELOAD_EN | enable_mask);
 
+	armada_370_delay_timer.freq = timer_clk;
+	register_current_timer_delay(&armada_370_delay_timer);
+
 	/*
 	 * Set scale and timer for sched_clock.
 	 */
diff --git a/drivers/clocksource/timer-atmel-st.c b/drivers/clocksource/timer-atmel-st.c
index 41b7b6dc1..29d21d68d 100644
--- a/drivers/clocksource/timer-atmel-st.c
+++ b/drivers/clocksource/timer-atmel-st.c
@@ -22,6 +22,7 @@
 #include <linux/kernel.h>
 #include <linux/interrupt.h>
 #include <linux/irq.h>
+#include <linux/clk.h>
 #include <linux/clockchips.h>
 #include <linux/export.h>
 #include <linux/mfd/syscon.h>
@@ -33,9 +34,7 @@ static unsigned long last_crtr;
 static u32 irqmask;
 static struct clock_event_device clkevt;
 static struct regmap *regmap_st;
-
-#define AT91_SLOW_CLOCK		32768
-#define RM9200_TIMER_LATCH	((AT91_SLOW_CLOCK + HZ/2) / HZ)
+static int timer_latch;
 
 /*
  * The ST_CRTR is updated asynchronously to the master clock ... but
@@ -82,8 +81,8 @@ static irqreturn_t at91rm9200_timer_interrupt(int irq, void *dev_id)
 	if (sr & AT91_ST_PITS) {
 		u32	crtr = read_CRTR();
 
-		while (((crtr - last_crtr) & AT91_ST_CRTV) >= RM9200_TIMER_LATCH) {
-			last_crtr += RM9200_TIMER_LATCH;
+		while (((crtr - last_crtr) & AT91_ST_CRTV) >= timer_latch) {
+			last_crtr += timer_latch;
 			clkevt.event_handler(&clkevt);
 		}
 		return IRQ_HANDLED;
@@ -144,7 +143,7 @@ static int clkevt32k_set_periodic(struct clock_event_device *dev)
 
 	/* PIT for periodic irqs; fixed rate of 1/HZ */
 	irqmask = AT91_ST_PITS;
-	regmap_write(regmap_st, AT91_ST_PIMR, RM9200_TIMER_LATCH);
+	regmap_write(regmap_st, AT91_ST_PIMR, timer_latch);
 	regmap_write(regmap_st, AT91_ST_IER, irqmask);
 	return 0;
 }
@@ -197,7 +196,8 @@ static struct clock_event_device clkevt = {
  */
 static void __init atmel_st_timer_init(struct device_node *node)
 {
-	unsigned int val;
+	struct clk *sclk;
+	unsigned int sclk_rate, val;
 	int irq, ret;
 
 	regmap_st = syscon_node_to_regmap(node);
@@ -221,6 +221,19 @@ static void __init atmel_st_timer_init(struct device_node *node)
 	if (ret)
 		panic(pr_fmt("Unable to setup IRQ\n"));
 
+	sclk = of_clk_get(node, 0);
+	if (IS_ERR(sclk))
+		panic(pr_fmt("Unable to get slow clock\n"));
+
+	clk_prepare_enable(sclk);
+	if (ret)
+		panic(pr_fmt("Could not enable slow clock\n"));
+
+	sclk_rate = clk_get_rate(sclk);
+	if (!sclk_rate)
+		panic(pr_fmt("Invalid slow clock rate\n"));
+	timer_latch = (sclk_rate + HZ / 2) / HZ;
+
 	/* The 32KiHz "Slow Clock" (tick every 30517.58 nanoseconds) is used
 	 * directly for the clocksource and all clockevents, after adjusting
 	 * its prescaler from the 1 Hz default.
@@ -229,11 +242,11 @@ static void __init atmel_st_timer_init(struct device_node *node)
 
 	/* Setup timer clockevent, with minimum of two ticks (important!!) */
 	clkevt.cpumask = cpumask_of(0);
-	clockevents_config_and_register(&clkevt, AT91_SLOW_CLOCK,
+	clockevents_config_and_register(&clkevt, sclk_rate,
 					2, AT91_ST_ALMV);
 
 	/* register clocksource */
-	clocksource_register_hz(&clk32k, AT91_SLOW_CLOCK);
+	clocksource_register_hz(&clk32k, sclk_rate);
 }
 CLOCKSOURCE_OF_DECLARE(atmel_st_timer, "atmel,at91rm9200-st",
 		       atmel_st_timer_init);
diff --git a/drivers/clocksource/timer-imx-gpt.c b/drivers/clocksource/timer-imx-gpt.c
index 839aba92f..99ec96769 100644
--- a/drivers/clocksource/timer-imx-gpt.c
+++ b/drivers/clocksource/timer-imx-gpt.c
@@ -305,13 +305,14 @@ static int __init mxc_clockevent_init(struct imx_timer *imxtm)
 	struct irqaction *act = &imxtm->act;
 
 	ced->name = "mxc_timer1";
-	ced->features = CLOCK_EVT_FEAT_ONESHOT;
+	ced->features = CLOCK_EVT_FEAT_ONESHOT | CLOCK_EVT_FEAT_DYNIRQ;
 	ced->set_state_shutdown = mxc_shutdown;
 	ced->set_state_oneshot = mxc_set_oneshot;
 	ced->tick_resume = mxc_shutdown;
 	ced->set_next_event = imxtm->gpt->set_next_event;
 	ced->rating = 200;
 	ced->cpumask = cpumask_of(0);
+	ced->irq = imxtm->irq;
 	clockevents_config_and_register(ced, clk_get_rate(imxtm->clk_per),
 					0xff, 0xfffffffe);
 
diff --git a/drivers/clocksource/timer-ti-32k.c b/drivers/clocksource/timer-ti-32k.c
new file mode 100644
index 000000000..8518d9dfb
--- /dev/null
+++ b/drivers/clocksource/timer-ti-32k.c
@@ -0,0 +1,126 @@
+/**
+ * timer-ti-32k.c - OMAP2 32k Timer Support
+ *
+ * Copyright (C) 2009 Nokia Corporation
+ *
+ * Update to use new clocksource/clockevent layers
+ * Author: Kevin Hilman, MontaVista Software, Inc. <source@mvista.com>
+ * Copyright (C) 2007 MontaVista Software, Inc.
+ *
+ * Original driver:
+ * Copyright (C) 2005 Nokia Corporation
+ * Author: Paul Mundt <paul.mundt@nokia.com>
+ *         Juha Yrjölä <juha.yrjola@nokia.com>
+ * OMAP Dual-mode timer framework support by Timo Teras
+ *
+ * Some parts based off of TI's 24xx code:
+ *
+ * Copyright (C) 2004-2009 Texas Instruments, Inc.
+ *
+ * Roughly modelled after the OMAP1 MPU timer code.
+ * Added OMAP4 support - Santosh Shilimkar <santosh.shilimkar@ti.com>
+ *
+ * Copyright (C) 2015 Texas Instruments Incorporated - http://www.ti.com
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2  of
+ * the License as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include <linux/init.h>
+#include <linux/time.h>
+#include <linux/sched_clock.h>
+#include <linux/clocksource.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+
+/*
+ * 32KHz clocksource ... always available, on pretty most chips except
+ * OMAP 730 and 1510.  Other timers could be used as clocksources, with
+ * higher resolution in free-running counter modes (e.g. 12 MHz xtal),
+ * but systems won't necessarily want to spend resources that way.
+ */
+
+#define OMAP2_32KSYNCNT_REV_OFF		0x0
+#define OMAP2_32KSYNCNT_REV_SCHEME	(0x3 << 30)
+#define OMAP2_32KSYNCNT_CR_OFF_LOW	0x10
+#define OMAP2_32KSYNCNT_CR_OFF_HIGH	0x30
+
+struct ti_32k {
+	void __iomem		*base;
+	void __iomem		*counter;
+	struct clocksource	cs;
+};
+
+static inline struct ti_32k *to_ti_32k(struct clocksource *cs)
+{
+	return container_of(cs, struct ti_32k, cs);
+}
+
+static cycle_t ti_32k_read_cycles(struct clocksource *cs)
+{
+	struct ti_32k *ti = to_ti_32k(cs);
+
+	return (cycle_t)readl_relaxed(ti->counter);
+}
+
+static struct ti_32k ti_32k_timer = {
+	.cs = {
+		.name		= "32k_counter",
+		.rating		= 250,
+		.read		= ti_32k_read_cycles,
+		.mask		= CLOCKSOURCE_MASK(32),
+		.flags		= CLOCK_SOURCE_IS_CONTINUOUS |
+				CLOCK_SOURCE_SUSPEND_NONSTOP,
+	},
+};
+
+static u64 notrace omap_32k_read_sched_clock(void)
+{
+	return ti_32k_read_cycles(&ti_32k_timer.cs);
+}
+
+static void __init ti_32k_timer_init(struct device_node *np)
+{
+	int ret;
+
+	ti_32k_timer.base = of_iomap(np, 0);
+	if (!ti_32k_timer.base) {
+		pr_err("Can't ioremap 32k timer base\n");
+		return;
+	}
+
+	ti_32k_timer.counter = ti_32k_timer.base;
+
+	/*
+	 * 32k sync Counter IP register offsets vary between the highlander
+	 * version and the legacy ones.
+	 *
+	 * The 'SCHEME' bits(30-31) of the revision register is used to identify
+	 * the version.
+	 */
+	if (readl_relaxed(ti_32k_timer.base + OMAP2_32KSYNCNT_REV_OFF) &
+			OMAP2_32KSYNCNT_REV_SCHEME)
+		ti_32k_timer.counter += OMAP2_32KSYNCNT_CR_OFF_HIGH;
+	else
+		ti_32k_timer.counter += OMAP2_32KSYNCNT_CR_OFF_LOW;
+
+	ret = clocksource_register_hz(&ti_32k_timer.cs, 32768);
+	if (ret) {
+		pr_err("32k_counter: can't register clocksource\n");
+		return;
+	}
+
+	sched_clock_register(omap_32k_read_sched_clock, 32, 32768);
+	pr_info("OMAP clocksource: 32k_counter at 32768 Hz\n");
+}
+CLOCKSOURCE_OF_DECLARE(ti_32k_timer, "ti,omap-counter32k",
+		ti_32k_timer_init);