diff options
Diffstat (limited to 'drivers/cpufreq/exynos4210-cpufreq.c')
| -rw-r--r-- | drivers/cpufreq/exynos4210-cpufreq.c | 184 |
1 files changed, 184 insertions, 0 deletions
diff --git a/drivers/cpufreq/exynos4210-cpufreq.c b/drivers/cpufreq/exynos4210-cpufreq.c new file mode 100644 index 000000000..843ec824f --- /dev/null +++ b/drivers/cpufreq/exynos4210-cpufreq.c @@ -0,0 +1,184 @@ +/* + * Copyright (c) 2010-2011 Samsung Electronics Co., Ltd. + * http://www.samsung.com + * + * EXYNOS4210 - CPU frequency scaling support + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#include <linux/module.h> +#include <linux/kernel.h> +#include <linux/err.h> +#include <linux/clk.h> +#include <linux/io.h> +#include <linux/slab.h> +#include <linux/cpufreq.h> +#include <linux/of.h> +#include <linux/of_address.h> + +#include "exynos-cpufreq.h" + +static struct clk *cpu_clk; +static struct clk *moutcore; +static struct clk *mout_mpll; +static struct clk *mout_apll; +static struct exynos_dvfs_info *cpufreq; + +static unsigned int exynos4210_volt_table[] = { + 1250000, 1150000, 1050000, 975000, 950000, +}; + +static struct cpufreq_frequency_table exynos4210_freq_table[] = { + {0, L0, 1200 * 1000}, + {0, L1, 1000 * 1000}, + {0, L2, 800 * 1000}, + {0, L3, 500 * 1000}, + {0, L4, 200 * 1000}, + {0, 0, CPUFREQ_TABLE_END}, +}; + +static struct apll_freq apll_freq_4210[] = { + /* + * values: + * freq + * clock divider for CORE, COREM0, COREM1, PERIPH, ATB, PCLK_DBG, APLL, RESERVED + * clock divider for COPY, HPM, RESERVED + * PLL M, P, S + */ + APLL_FREQ(1200, 0, 3, 7, 3, 4, 1, 7, 0, 5, 0, 0, 150, 3, 1), + APLL_FREQ(1000, 0, 3, 7, 3, 4, 1, 7, 0, 4, 0, 0, 250, 6, 1), + APLL_FREQ(800, 0, 3, 7, 3, 3, 1, 7, 0, 3, 0, 0, 200, 6, 1), + APLL_FREQ(500, 0, 3, 7, 3, 3, 1, 7, 0, 3, 0, 0, 250, 6, 2), + APLL_FREQ(200, 0, 1, 3, 1, 3, 1, 0, 0, 3, 0, 0, 200, 6, 3), +}; + +static void exynos4210_set_clkdiv(unsigned int div_index) +{ + unsigned int tmp; + + /* Change Divider - CPU0 */ + + tmp = apll_freq_4210[div_index].clk_div_cpu0; + + __raw_writel(tmp, cpufreq->cmu_regs + EXYNOS4_CLKDIV_CPU); + + do { + tmp = __raw_readl(cpufreq->cmu_regs + EXYNOS4_CLKDIV_STATCPU); + } while (tmp & 0x1111111); + + /* Change Divider - CPU1 */ + + tmp = apll_freq_4210[div_index].clk_div_cpu1; + + __raw_writel(tmp, cpufreq->cmu_regs + EXYNOS4_CLKDIV_CPU1); + + do { + tmp = __raw_readl(cpufreq->cmu_regs + EXYNOS4_CLKDIV_STATCPU1); + } while (tmp & 0x11); +} + +static void exynos4210_set_apll(unsigned int index) +{ + unsigned int tmp, freq = apll_freq_4210[index].freq; + + /* MUX_CORE_SEL = MPLL, ARMCLK uses MPLL for lock time */ + clk_set_parent(moutcore, mout_mpll); + + do { + tmp = (__raw_readl(cpufreq->cmu_regs + EXYNOS4_CLKMUX_STATCPU) + >> EXYNOS4_CLKSRC_CPU_MUXCORE_SHIFT); + tmp &= 0x7; + } while (tmp != 0x2); + + clk_set_rate(mout_apll, freq * 1000); + + /* MUX_CORE_SEL = APLL */ + clk_set_parent(moutcore, mout_apll); + + do { + tmp = __raw_readl(cpufreq->cmu_regs + EXYNOS4_CLKMUX_STATCPU); + tmp &= EXYNOS4_CLKMUX_STATCPU_MUXCORE_MASK; + } while (tmp != (0x1 << EXYNOS4_CLKSRC_CPU_MUXCORE_SHIFT)); +} + +static void exynos4210_set_frequency(unsigned int old_index, + unsigned int new_index) +{ + if (old_index > new_index) { + exynos4210_set_clkdiv(new_index); + exynos4210_set_apll(new_index); + } else if (old_index < new_index) { + exynos4210_set_apll(new_index); + exynos4210_set_clkdiv(new_index); + } +} + +int exynos4210_cpufreq_init(struct exynos_dvfs_info *info) +{ + struct device_node *np; + unsigned long rate; + + /* + * HACK: This is a temporary workaround to get access to clock + * controller registers directly and remove static mappings and + * dependencies on platform headers. It is necessary to enable + * Exynos multi-platform support and will be removed together with + * this whole driver as soon as Exynos gets migrated to use + * cpufreq-dt driver. + */ + np = of_find_compatible_node(NULL, NULL, "samsung,exynos4210-clock"); + if (!np) { + pr_err("%s: failed to find clock controller DT node\n", + __func__); + return -ENODEV; + } + + info->cmu_regs = of_iomap(np, 0); + if (!info->cmu_regs) { + pr_err("%s: failed to map CMU registers\n", __func__); + return -EFAULT; + } + + cpu_clk = clk_get(NULL, "armclk"); + if (IS_ERR(cpu_clk)) + return PTR_ERR(cpu_clk); + + moutcore = clk_get(NULL, "moutcore"); + if (IS_ERR(moutcore)) + goto err_moutcore; + + mout_mpll = clk_get(NULL, "mout_mpll"); + if (IS_ERR(mout_mpll)) + goto err_mout_mpll; + + rate = clk_get_rate(mout_mpll) / 1000; + + mout_apll = clk_get(NULL, "mout_apll"); + if (IS_ERR(mout_apll)) + goto err_mout_apll; + + info->mpll_freq_khz = rate; + /* 800Mhz */ + info->pll_safe_idx = L2; + info->cpu_clk = cpu_clk; + info->volt_table = exynos4210_volt_table; + info->freq_table = exynos4210_freq_table; + info->set_freq = exynos4210_set_frequency; + + cpufreq = info; + + return 0; + +err_mout_apll: + clk_put(mout_mpll); +err_mout_mpll: + clk_put(moutcore); +err_moutcore: + clk_put(cpu_clk); + + pr_debug("%s: failed initialization\n", __func__); + return -EINVAL; +} |