diff options
Diffstat (limited to 'drivers/devfreq/Kconfig')
| -rw-r--r-- | drivers/devfreq/Kconfig | 103 |
1 files changed, 103 insertions, 0 deletions
diff --git a/drivers/devfreq/Kconfig b/drivers/devfreq/Kconfig new file mode 100644 index 000000000..64281bb2f --- /dev/null +++ b/drivers/devfreq/Kconfig @@ -0,0 +1,103 @@ +menuconfig PM_DEVFREQ + bool "Generic Dynamic Voltage and Frequency Scaling (DVFS) support" + select SRCU + help + A device may have a list of frequencies and voltages available. + devfreq, a generic DVFS framework can be registered for a device + in order to let the governor provided to devfreq choose an + operating frequency based on the device driver's policy. + + Each device may have its own governor and policy. Devfreq can + reevaluate the device state periodically and/or based on the + notification to "nb", a notifier block, of devfreq. + + Like some CPUs with CPUfreq, a device may have multiple clocks. + However, because the clock frequencies of a single device are + determined by the single device's state, an instance of devfreq + is attached to a single device and returns a "representative" + clock frequency of the device, which is also attached + to a device by 1-to-1. The device registering devfreq takes the + responsibility to "interpret" the representative frequency and + to set its every clock accordingly with the "target" callback + given to devfreq. + + When OPP is used with the devfreq device, it is recommended to + register devfreq's nb to the OPP's notifier head. If OPP is + used with the devfreq device, you may use OPP helper + functions defined in devfreq.h. + +if PM_DEVFREQ + +comment "DEVFREQ Governors" + +config DEVFREQ_GOV_SIMPLE_ONDEMAND + tristate "Simple Ondemand" + help + Chooses frequency based on the recent load on the device. Works + similar as ONDEMAND governor of CPUFREQ does. A device with + Simple-Ondemand should be able to provide busy/total counter + values that imply the usage rate. A device may provide tuned + values to the governor with data field at devfreq_add_device(). + +config DEVFREQ_GOV_PERFORMANCE + tristate "Performance" + help + Sets the frequency at the maximum available frequency. + This governor always returns UINT_MAX as frequency so that + the DEVFREQ framework returns the highest frequency available + at any time. + +config DEVFREQ_GOV_POWERSAVE + tristate "Powersave" + help + Sets the frequency at the minimum available frequency. + This governor always returns 0 as frequency so that + the DEVFREQ framework returns the lowest frequency available + at any time. + +config DEVFREQ_GOV_USERSPACE + tristate "Userspace" + help + Sets the frequency at the user specified one. + This governor returns the user configured frequency if there + has been an input to /sys/devices/.../power/devfreq_set_freq. + Otherwise, the governor does not change the frequnecy + given at the initialization. + +comment "DEVFREQ Drivers" + +config ARM_EXYNOS4_BUS_DEVFREQ + bool "ARM Exynos4210/4212/4412 Memory Bus DEVFREQ Driver" + depends on (CPU_EXYNOS4210 || SOC_EXYNOS4212 || SOC_EXYNOS4412) && !ARCH_MULTIPLATFORM + select DEVFREQ_GOV_SIMPLE_ONDEMAND + select PM_OPP + help + This adds the DEVFREQ driver for Exynos4210 memory bus (vdd_int) + and Exynos4212/4412 memory interface and bus (vdd_mif + vdd_int). + It reads PPMU counters of memory controllers and adjusts + the operating frequencies and voltages with OPP support. + This does not yet operate with optimal voltages. + +config ARM_EXYNOS5_BUS_DEVFREQ + tristate "ARM Exynos5250 Bus DEVFREQ Driver" + depends on SOC_EXYNOS5250 + select DEVFREQ_GOV_SIMPLE_ONDEMAND + select PM_OPP + help + This adds the DEVFREQ driver for Exynos5250 bus interface (vdd_int). + It reads PPMU counters of memory controllers and adjusts the + operating frequencies and voltages with OPP support. + +config ARM_TEGRA_DEVFREQ + tristate "Tegra DEVFREQ Driver" + depends on ARCH_TEGRA_124_SOC + select DEVFREQ_GOV_SIMPLE_ONDEMAND + select PM_OPP + help + This adds the DEVFREQ driver for the Tegra family of SoCs. + It reads ACTMON counters of memory controllers and adjusts the + operating frequencies and voltages with OPP support. + +source "drivers/devfreq/event/Kconfig" + +endif # PM_DEVFREQ |