diff options
Diffstat (limited to 'drivers/dma/Kconfig')
-rw-r--r-- | drivers/dma/Kconfig | 495 |
1 files changed, 495 insertions, 0 deletions
diff --git a/drivers/dma/Kconfig b/drivers/dma/Kconfig new file mode 100644 index 000000000..bda2cb06d --- /dev/null +++ b/drivers/dma/Kconfig @@ -0,0 +1,495 @@ +# +# DMA engine configuration +# + +menuconfig DMADEVICES + bool "DMA Engine support" + depends on HAS_DMA + help + DMA engines can do asynchronous data transfers without + involving the host CPU. Currently, this framework can be + used to offload memory copies in the network stack and + RAID operations in the MD driver. This menu only presents + DMA Device drivers supported by the configured arch, it may + be empty in some cases. + +config DMADEVICES_DEBUG + bool "DMA Engine debugging" + depends on DMADEVICES != n + help + This is an option for use by developers; most people should + say N here. This enables DMA engine core and driver debugging. + +config DMADEVICES_VDEBUG + bool "DMA Engine verbose debugging" + depends on DMADEVICES_DEBUG != n + help + This is an option for use by developers; most people should + say N here. This enables deeper (more verbose) debugging of + the DMA engine core and drivers. + + +if DMADEVICES + +comment "DMA Devices" + +config INTEL_MIC_X100_DMA + tristate "Intel MIC X100 DMA Driver" + depends on 64BIT && X86 && INTEL_MIC_BUS + select DMA_ENGINE + help + This enables DMA support for the Intel Many Integrated Core + (MIC) family of PCIe form factor coprocessor X100 devices that + run a 64 bit Linux OS. This driver will be used by both MIC + host and card drivers. + + If you are building host kernel with a MIC device or a card + kernel for a MIC device, then say M (recommended) or Y, else + say N. If unsure say N. + + More information about the Intel MIC family as well as the Linux + OS and tools for MIC to use with this driver are available from + <http://software.intel.com/en-us/mic-developer>. + +config ASYNC_TX_ENABLE_CHANNEL_SWITCH + bool + +config AMBA_PL08X + bool "ARM PrimeCell PL080 or PL081 support" + depends on ARM_AMBA + select DMA_ENGINE + select DMA_VIRTUAL_CHANNELS + help + Platform has a PL08x DMAC device + which can provide DMA engine support + +config INTEL_IOATDMA + tristate "Intel I/OAT DMA support" + depends on PCI && X86 + select DMA_ENGINE + select DMA_ENGINE_RAID + select DCA + help + Enable support for the Intel(R) I/OAT DMA engine present + in recent Intel Xeon chipsets. + + Say Y here if you have such a chipset. + + If unsure, say N. + +config INTEL_IOP_ADMA + tristate "Intel IOP ADMA support" + depends on ARCH_IOP32X || ARCH_IOP33X || ARCH_IOP13XX + select DMA_ENGINE + select ASYNC_TX_ENABLE_CHANNEL_SWITCH + help + Enable support for the Intel(R) IOP Series RAID engines. + +source "drivers/dma/dw/Kconfig" + +config AT_HDMAC + tristate "Atmel AHB DMA support" + depends on ARCH_AT91 + select DMA_ENGINE + help + Support the Atmel AHB DMA controller. + +config AT_XDMAC + tristate "Atmel XDMA support" + depends on ARCH_AT91 + select DMA_ENGINE + help + Support the Atmel XDMA controller. + +config FSL_DMA + tristate "Freescale Elo series DMA support" + depends on FSL_SOC + select DMA_ENGINE + select ASYNC_TX_ENABLE_CHANNEL_SWITCH + ---help--- + Enable support for the Freescale Elo series DMA controllers. + The Elo is the DMA controller on some mpc82xx and mpc83xx parts, the + EloPlus is on mpc85xx and mpc86xx and Pxxx parts, and the Elo3 is on + some Txxx and Bxxx parts. + +config FSL_RAID + tristate "Freescale RAID engine Support" + depends on FSL_SOC && !ASYNC_TX_ENABLE_CHANNEL_SWITCH + select DMA_ENGINE + select DMA_ENGINE_RAID + ---help--- + Enable support for Freescale RAID Engine. RAID Engine is + available on some QorIQ SoCs (like P5020/P5040). It has + the capability to offload memcpy, xor and pq computation + for raid5/6. + +source "drivers/dma/hsu/Kconfig" + +config MPC512X_DMA + tristate "Freescale MPC512x built-in DMA engine support" + depends on PPC_MPC512x || PPC_MPC831x + select DMA_ENGINE + ---help--- + Enable support for the Freescale MPC512x built-in DMA engine. + +source "drivers/dma/bestcomm/Kconfig" + +config MV_XOR + bool "Marvell XOR engine support" + depends on PLAT_ORION + select DMA_ENGINE + select DMA_ENGINE_RAID + select ASYNC_TX_ENABLE_CHANNEL_SWITCH + ---help--- + Enable support for the Marvell XOR engine. + +config MX3_IPU + bool "MX3x Image Processing Unit support" + depends on ARCH_MXC + select DMA_ENGINE + default y + help + If you plan to use the Image Processing unit in the i.MX3x, say + Y here. If unsure, select Y. + +config MX3_IPU_IRQS + int "Number of dynamically mapped interrupts for IPU" + depends on MX3_IPU + range 2 137 + default 4 + help + Out of 137 interrupt sources on i.MX31 IPU only very few are used. + To avoid bloating the irq_desc[] array we allocate a sufficient + number of IRQ slots and map them dynamically to specific sources. + +config TXX9_DMAC + tristate "Toshiba TXx9 SoC DMA support" + depends on MACH_TX49XX || MACH_TX39XX + select DMA_ENGINE + help + Support the TXx9 SoC internal DMA controller. This can be + integrated in chips such as the Toshiba TX4927/38/39. + +config TEGRA20_APB_DMA + bool "NVIDIA Tegra20 APB DMA support" + depends on ARCH_TEGRA + select DMA_ENGINE + help + Support for the NVIDIA Tegra20 APB DMA controller driver. The + DMA controller is having multiple DMA channel which can be + configured for different peripherals like audio, UART, SPI, + I2C etc which is in APB bus. + This DMA controller transfers data from memory to peripheral fifo + or vice versa. It does not support memory to memory data transfer. + +config S3C24XX_DMAC + tristate "Samsung S3C24XX DMA support" + depends on ARCH_S3C24XX + select DMA_ENGINE + select DMA_VIRTUAL_CHANNELS + help + Support for the Samsung S3C24XX DMA controller driver. The + DMA controller is having multiple DMA channels which can be + configured for different peripherals like audio, UART, SPI. + The DMA controller can transfer data from memory to peripheral, + periphal to memory, periphal to periphal and memory to memory. + +source "drivers/dma/sh/Kconfig" + +config COH901318 + bool "ST-Ericsson COH901318 DMA support" + select DMA_ENGINE + depends on ARCH_U300 + help + Enable support for ST-Ericsson COH 901 318 DMA. + +config STE_DMA40 + bool "ST-Ericsson DMA40 support" + depends on ARCH_U8500 + select DMA_ENGINE + help + Support for ST-Ericsson DMA40 controller + +config AMCC_PPC440SPE_ADMA + tristate "AMCC PPC440SPe ADMA support" + depends on 440SPe || 440SP + select DMA_ENGINE + select DMA_ENGINE_RAID + select ARCH_HAS_ASYNC_TX_FIND_CHANNEL + select ASYNC_TX_ENABLE_CHANNEL_SWITCH + help + Enable support for the AMCC PPC440SPe RAID engines. + +config TIMB_DMA + tristate "Timberdale FPGA DMA support" + depends on MFD_TIMBERDALE + select DMA_ENGINE + help + Enable support for the Timberdale FPGA DMA engine. + +config SIRF_DMA + tristate "CSR SiRFprimaII/SiRFmarco DMA support" + depends on ARCH_SIRF + select DMA_ENGINE + help + Enable support for the CSR SiRFprimaII DMA engine. + +config TI_EDMA + bool "TI EDMA support" + depends on ARCH_DAVINCI || ARCH_OMAP || ARCH_KEYSTONE + select DMA_ENGINE + select DMA_VIRTUAL_CHANNELS + select TI_PRIV_EDMA + default n + help + Enable support for the TI EDMA controller. This DMA + engine is found on TI DaVinci and AM33xx parts. + +config ARCH_HAS_ASYNC_TX_FIND_CHANNEL + bool + +config PL330_DMA + tristate "DMA API Driver for PL330" + select DMA_ENGINE + depends on ARM_AMBA + help + Select if your platform has one or more PL330 DMACs. + You need to provide platform specific settings via + platform_data for a dma-pl330 device. + +config PCH_DMA + tristate "Intel EG20T PCH / LAPIS Semicon IOH(ML7213/ML7223/ML7831) DMA" + depends on PCI && (X86_32 || COMPILE_TEST) + select DMA_ENGINE + help + Enable support for Intel EG20T PCH DMA engine. + + This driver also can be used for LAPIS Semiconductor IOH(Input/ + Output Hub), ML7213, ML7223 and ML7831. + ML7213 IOH is for IVI(In-Vehicle Infotainment) use, ML7223 IOH is + for MP(Media Phone) use and ML7831 IOH is for general purpose use. + ML7213/ML7223/ML7831 is companion chip for Intel Atom E6xx series. + ML7213/ML7223/ML7831 is completely compatible for Intel EG20T PCH. + +config IMX_SDMA + tristate "i.MX SDMA support" + depends on ARCH_MXC + select DMA_ENGINE + help + Support the i.MX SDMA engine. This engine is integrated into + Freescale i.MX25/31/35/51/53/6 chips. + +config IMX_DMA + tristate "i.MX DMA support" + depends on ARCH_MXC + select DMA_ENGINE + help + Support the i.MX DMA engine. This engine is integrated into + Freescale i.MX1/21/27 chips. + +config MXS_DMA + bool "MXS DMA support" + depends on SOC_IMX23 || SOC_IMX28 || SOC_IMX6Q + select STMP_DEVICE + select DMA_ENGINE + help + Support the MXS DMA engine. This engine including APBH-DMA + and APBX-DMA is integrated into Freescale i.MX23/28/MX6Q/MX6DL chips. + +config EP93XX_DMA + bool "Cirrus Logic EP93xx DMA support" + depends on ARCH_EP93XX + select DMA_ENGINE + help + Enable support for the Cirrus Logic EP93xx M2P/M2M DMA controller. + +config DMA_SA11X0 + tristate "SA-11x0 DMA support" + depends on ARCH_SA1100 + select DMA_ENGINE + select DMA_VIRTUAL_CHANNELS + help + Support the DMA engine found on Intel StrongARM SA-1100 and + SA-1110 SoCs. This DMA engine can only be used with on-chip + devices. + +config MMP_TDMA + bool "MMP Two-Channel DMA support" + depends on ARCH_MMP + select DMA_ENGINE + select MMP_SRAM + help + Support the MMP Two-Channel DMA engine. + This engine used for MMP Audio DMA and pxa910 SQU. + It needs sram driver under mach-mmp. + + Say Y here if you enabled MMP ADMA, otherwise say N. + +config DMA_OMAP + tristate "OMAP DMA support" + depends on ARCH_OMAP + select DMA_ENGINE + select DMA_VIRTUAL_CHANNELS + +config DMA_BCM2835 + tristate "BCM2835 DMA engine support" + depends on ARCH_BCM2835 + select DMA_ENGINE + select DMA_VIRTUAL_CHANNELS + +config TI_CPPI41 + tristate "AM33xx CPPI41 DMA support" + depends on ARCH_OMAP + select DMA_ENGINE + help + The Communications Port Programming Interface (CPPI) 4.1 DMA engine + is currently used by the USB driver on AM335x platforms. + +config MMP_PDMA + bool "MMP PDMA support" + depends on (ARCH_MMP || ARCH_PXA) + select DMA_ENGINE + help + Support the MMP PDMA engine for PXA and MMP platform. + +config DMA_JZ4740 + tristate "JZ4740 DMA support" + depends on MACH_JZ4740 + select DMA_ENGINE + select DMA_VIRTUAL_CHANNELS + +config DMA_JZ4780 + tristate "JZ4780 DMA support" + depends on MACH_JZ4780 + select DMA_ENGINE + select DMA_VIRTUAL_CHANNELS + help + This selects support for the DMA controller in Ingenic JZ4780 SoCs. + If you have a board based on such a SoC and wish to use DMA for + devices which can use the DMA controller, say Y or M here. + +config K3_DMA + tristate "Hisilicon K3 DMA support" + depends on ARCH_HI3xxx + select DMA_ENGINE + select DMA_VIRTUAL_CHANNELS + help + Support the DMA engine for Hisilicon K3 platform + devices. + +config MOXART_DMA + tristate "MOXART DMA support" + depends on ARCH_MOXART + select DMA_ENGINE + select DMA_OF + select DMA_VIRTUAL_CHANNELS + help + Enable support for the MOXA ART SoC DMA controller. + +config FSL_EDMA + tristate "Freescale eDMA engine support" + depends on OF + select DMA_ENGINE + select DMA_VIRTUAL_CHANNELS + help + Support the Freescale eDMA engine with programmable channel + multiplexing capability for DMA request sources(slot). + This module can be found on Freescale Vybrid and LS-1 SoCs. + +config XILINX_VDMA + tristate "Xilinx AXI VDMA Engine" + depends on (ARCH_ZYNQ || MICROBLAZE) + select DMA_ENGINE + help + Enable support for Xilinx AXI VDMA Soft IP. + + This engine provides high-bandwidth direct memory access + between memory and AXI4-Stream video type target + peripherals including peripherals which support AXI4- + Stream Video Protocol. It has two stream interfaces/ + channels, Memory Mapped to Stream (MM2S) and Stream to + Memory Mapped (S2MM) for the data transfers. + +config DMA_SUN6I + tristate "Allwinner A31 SoCs DMA support" + depends on MACH_SUN6I || MACH_SUN8I || COMPILE_TEST + depends on RESET_CONTROLLER + select DMA_ENGINE + select DMA_VIRTUAL_CHANNELS + help + Support for the DMA engine first found in Allwinner A31 SoCs. + +config NBPFAXI_DMA + tristate "Renesas Type-AXI NBPF DMA support" + select DMA_ENGINE + depends on ARM || COMPILE_TEST + help + Support for "Type-AXI" NBPF DMA IPs from Renesas + +config IMG_MDC_DMA + tristate "IMG MDC support" + depends on MIPS || COMPILE_TEST + depends on MFD_SYSCON + select DMA_ENGINE + select DMA_VIRTUAL_CHANNELS + help + Enable support for the IMG multi-threaded DMA controller (MDC). + +config XGENE_DMA + tristate "APM X-Gene DMA support" + depends on ARCH_XGENE || COMPILE_TEST + select DMA_ENGINE + select DMA_ENGINE_RAID + select ASYNC_TX_ENABLE_CHANNEL_SWITCH + help + Enable support for the APM X-Gene SoC DMA engine. + +config DMA_ENGINE + bool + +config DMA_VIRTUAL_CHANNELS + tristate + +config DMA_ACPI + def_bool y + depends on ACPI + +config DMA_OF + def_bool y + depends on OF + select DMA_ENGINE + +comment "DMA Clients" + depends on DMA_ENGINE + +config ASYNC_TX_DMA + bool "Async_tx: Offload support for the async_tx api" + depends on DMA_ENGINE + help + This allows the async_tx api to take advantage of offload engines for + memcpy, memset, xor, and raid6 p+q operations. If your platform has + a dma engine that can perform raid operations and you have enabled + MD_RAID456 say Y. + + If unsure, say N. + +config DMATEST + tristate "DMA Test client" + depends on DMA_ENGINE + help + Simple DMA test client. Say N unless you're debugging a + DMA Device driver. + +config DMA_ENGINE_RAID + bool + +config QCOM_BAM_DMA + tristate "QCOM BAM DMA support" + depends on ARCH_QCOM || (COMPILE_TEST && OF && ARM) + select DMA_ENGINE + select DMA_VIRTUAL_CHANNELS + ---help--- + Enable support for the QCOM BAM DMA controller. This controller + provides DMA capabilities for a variety of on-chip devices. + +endif |