summaryrefslogtreecommitdiff
path: root/drivers/dma/qcom/bam_dma.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/dma/qcom/bam_dma.c')
-rw-r--r--drivers/dma/qcom/bam_dma.c38
1 files changed, 26 insertions, 12 deletions
diff --git a/drivers/dma/qcom/bam_dma.c b/drivers/dma/qcom/bam_dma.c
index d5e0a9c3a..969b48176 100644
--- a/drivers/dma/qcom/bam_dma.c
+++ b/drivers/dma/qcom/bam_dma.c
@@ -342,7 +342,7 @@ static const struct reg_offset_data bam_v1_7_reg_info[] = {
#define BAM_DESC_FIFO_SIZE SZ_32K
#define MAX_DESCRIPTORS (BAM_DESC_FIFO_SIZE / sizeof(struct bam_desc_hw) - 1)
-#define BAM_MAX_DATA_SIZE (SZ_32K - 8)
+#define BAM_FIFO_SIZE (SZ_32K - 8)
struct bam_chan {
struct virt_dma_chan vc;
@@ -387,6 +387,7 @@ struct bam_device {
/* execution environment ID, from DT */
u32 ee;
+ bool controlled_remotely;
const struct reg_offset_data *layout;
@@ -458,7 +459,7 @@ static void bam_chan_init_hw(struct bam_chan *bchan,
*/
writel_relaxed(ALIGN(bchan->fifo_phys, sizeof(struct bam_desc_hw)),
bam_addr(bdev, bchan->id, BAM_P_DESC_FIFO_ADDR));
- writel_relaxed(BAM_DESC_FIFO_SIZE,
+ writel_relaxed(BAM_FIFO_SIZE,
bam_addr(bdev, bchan->id, BAM_P_FIFO_SIZES));
/* enable the per pipe interrupts, enable EOT, ERR, and INT irqs */
@@ -604,7 +605,7 @@ static struct dma_async_tx_descriptor *bam_prep_slave_sg(struct dma_chan *chan,
/* calculate number of required entries */
for_each_sg(sgl, sg, sg_len, i)
- num_alloc += DIV_ROUND_UP(sg_dma_len(sg), BAM_MAX_DATA_SIZE);
+ num_alloc += DIV_ROUND_UP(sg_dma_len(sg), BAM_FIFO_SIZE);
/* allocate enough room to accomodate the number of entries */
async_desc = kzalloc(sizeof(*async_desc) +
@@ -635,10 +636,10 @@ static struct dma_async_tx_descriptor *bam_prep_slave_sg(struct dma_chan *chan,
desc->addr = cpu_to_le32(sg_dma_address(sg) +
curr_offset);
- if (remainder > BAM_MAX_DATA_SIZE) {
- desc->size = cpu_to_le16(BAM_MAX_DATA_SIZE);
- remainder -= BAM_MAX_DATA_SIZE;
- curr_offset += BAM_MAX_DATA_SIZE;
+ if (remainder > BAM_FIFO_SIZE) {
+ desc->size = cpu_to_le16(BAM_FIFO_SIZE);
+ remainder -= BAM_FIFO_SIZE;
+ curr_offset += BAM_FIFO_SIZE;
} else {
desc->size = cpu_to_le16(remainder);
remainder = 0;
@@ -801,13 +802,17 @@ static irqreturn_t bam_dma_irq(int irq, void *data)
if (srcs & P_IRQ)
tasklet_schedule(&bdev->task);
- if (srcs & BAM_IRQ)
+ if (srcs & BAM_IRQ) {
clr_mask = readl_relaxed(bam_addr(bdev, 0, BAM_IRQ_STTS));
- /* don't allow reorder of the various accesses to the BAM registers */
- mb();
+ /*
+ * don't allow reorder of the various accesses to the BAM
+ * registers
+ */
+ mb();
- writel_relaxed(clr_mask, bam_addr(bdev, 0, BAM_IRQ_CLR));
+ writel_relaxed(clr_mask, bam_addr(bdev, 0, BAM_IRQ_CLR));
+ }
return IRQ_HANDLED;
}
@@ -1038,6 +1043,9 @@ static int bam_init(struct bam_device *bdev)
val = readl_relaxed(bam_addr(bdev, 0, BAM_NUM_PIPES));
bdev->num_channels = val & BAM_NUM_PIPES_MASK;
+ if (bdev->controlled_remotely)
+ return 0;
+
/* s/w reset bam */
/* after reset all pipes are disabled and idle */
val = readl_relaxed(bam_addr(bdev, 0, BAM_CTRL));
@@ -1125,6 +1133,9 @@ static int bam_dma_probe(struct platform_device *pdev)
return ret;
}
+ bdev->controlled_remotely = of_property_read_bool(pdev->dev.of_node,
+ "qcom,controlled-remotely");
+
bdev->bamclk = devm_clk_get(bdev->dev, "bam_clk");
if (IS_ERR(bdev->bamclk))
return PTR_ERR(bdev->bamclk);
@@ -1163,7 +1174,7 @@ static int bam_dma_probe(struct platform_device *pdev)
/* set max dma segment size */
bdev->common.dev = bdev->dev;
bdev->common.dev->dma_parms = &bdev->dma_parms;
- ret = dma_set_max_seg_size(bdev->common.dev, BAM_MAX_DATA_SIZE);
+ ret = dma_set_max_seg_size(bdev->common.dev, BAM_FIFO_SIZE);
if (ret) {
dev_err(bdev->dev, "cannot set maximum segment size\n");
goto err_bam_channel_exit;
@@ -1234,6 +1245,9 @@ static int bam_dma_remove(struct platform_device *pdev)
bam_dma_terminate_all(&bdev->channels[i].vc.chan);
tasklet_kill(&bdev->channels[i].vc.task);
+ if (!bdev->channels[i].fifo_virt)
+ continue;
+
dma_free_wc(bdev->dev, BAM_DESC_FIFO_SIZE,
bdev->channels[i].fifo_virt,
bdev->channels[i].fifo_phys);