1 files changed, 23 insertions, 5 deletions

diff --git a/drivers/gpu/drm/i915/intel_crt.c b/drivers/gpu/drm/i915/intel_crt.c
index 3fbb6fc66..a3f87d668 100644
--- a/drivers/gpu/drm/i915/intel_crt.c
+++ b/drivers/gpu/drm/i915/intel_crt.c
@@ -327,10 +327,25 @@ static bool valleyview_crt_detect_hotplug(struct drm_connector *connector)
 	struct drm_device *dev = connector->dev;
 	struct intel_crt *crt = intel_attached_crt(connector);
 	struct drm_i915_private *dev_priv = dev->dev_private;
+	bool reenable_hpd;
 	u32 adpa;
 	bool ret;
 	u32 save_adpa;
 
+	/*
+	 * Doing a force trigger causes a hpd interrupt to get sent, which can
+	 * get us stuck in a loop if we're polling:
+	 *  - We enable power wells and reset the ADPA
+	 *  - output_poll_exec does force probe on VGA, triggering a hpd
+	 *  - HPD handler waits for poll to unlock dev->mode_config.mutex
+	 *  - output_poll_exec shuts off the ADPA, unlocks
+	 *    dev->mode_config.mutex
+	 *  - HPD handler runs, resets ADPA and brings us back to the start
+	 *
+	 * Just disable HPD interrupts here to prevent this
+	 */
+	reenable_hpd = intel_hpd_disable(dev_priv, crt->base.hpd_pin);
+
 	save_adpa = adpa = I915_READ(crt->adpa_reg);
 	DRM_DEBUG_KMS("trigger hotplug detect cycle: adpa=0x%x\n", adpa);
 
@@ -353,6 +368,9 @@ static bool valleyview_crt_detect_hotplug(struct drm_connector *connector)
 
 	DRM_DEBUG_KMS("valleyview hotplug adpa=0x%x, result %d\n", adpa, ret);
 
+	if (reenable_hpd)
+		intel_hpd_enable(dev_priv, crt->base.hpd_pin);
+
 	return ret;
 }
 
@@ -713,11 +731,11 @@ static int intel_crt_set_property(struct drm_connector *connector,
 	return 0;
 }
 
-static void intel_crt_reset(struct drm_connector *connector)
+void intel_crt_reset(struct drm_encoder *encoder)
 {
-	struct drm_device *dev = connector->dev;
+	struct drm_device *dev = encoder->dev;
 	struct drm_i915_private *dev_priv = dev->dev_private;
-	struct intel_crt *crt = intel_attached_crt(connector);
+	struct intel_crt *crt = intel_encoder_to_crt(to_intel_encoder(encoder));
 
 	if (INTEL_INFO(dev)->gen >= 5) {
 		u32 adpa;
@@ -739,7 +757,6 @@ static void intel_crt_reset(struct drm_connector *connector)
  */
 
 static const struct drm_connector_funcs intel_crt_connector_funcs = {
-	.reset = intel_crt_reset,
 	.dpms = drm_atomic_helper_connector_dpms,
 	.detect = intel_crt_detect,
 	.fill_modes = drm_helper_probe_single_connector_modes,
@@ -757,6 +774,7 @@ static const struct drm_connector_helper_funcs intel_crt_connector_helper_funcs
 };
 
 static const struct drm_encoder_funcs intel_crt_enc_funcs = {
+	.reset = intel_crt_reset,
 	.destroy = intel_encoder_destroy,
 };
 
@@ -902,5 +920,5 @@ void intel_crt_init(struct drm_device *dev)
 		dev_priv->fdi_rx_config = I915_READ(FDI_RX_CTL(PIPE_A)) & fdi_config;
 	}
 
-	intel_crt_reset(connector);
+	intel_crt_reset(&crt->base.base);
 }