summaryrefslogtreecommitdiff
path: root/drivers/gpu/drm/vc4/vc4_crtc.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/gpu/drm/vc4/vc4_crtc.c')
-rw-r--r--drivers/gpu/drm/vc4/vc4_crtc.c183
1 files changed, 169 insertions, 14 deletions
diff --git a/drivers/gpu/drm/vc4/vc4_crtc.c b/drivers/gpu/drm/vc4/vc4_crtc.c
index 0f18b76c7..8fc2b731b 100644
--- a/drivers/gpu/drm/vc4/vc4_crtc.c
+++ b/drivers/gpu/drm/vc4/vc4_crtc.c
@@ -46,12 +46,17 @@ struct vc4_crtc {
const struct vc4_crtc_data *data;
void __iomem *regs;
+ /* Timestamp at start of vblank irq - unaffected by lock delays. */
+ ktime_t t_vblank;
+
/* Which HVS channel we're using for our CRTC. */
int channel;
u8 lut_r[256];
u8 lut_g[256];
u8 lut_b[256];
+ /* Size in pixels of the COB memory allocated to this CRTC. */
+ u32 cob_size;
struct drm_pending_vblank_event *event;
};
@@ -146,6 +151,144 @@ int vc4_crtc_debugfs_regs(struct seq_file *m, void *unused)
}
#endif
+int vc4_crtc_get_scanoutpos(struct drm_device *dev, unsigned int crtc_id,
+ unsigned int flags, int *vpos, int *hpos,
+ ktime_t *stime, ktime_t *etime,
+ const struct drm_display_mode *mode)
+{
+ struct vc4_dev *vc4 = to_vc4_dev(dev);
+ struct vc4_crtc *vc4_crtc = vc4->crtc[crtc_id];
+ u32 val;
+ int fifo_lines;
+ int vblank_lines;
+ int ret = 0;
+
+ /*
+ * XXX Doesn't work well in interlaced mode yet, partially due
+ * to problems in vc4 kms or drm core interlaced mode handling,
+ * so disable for now in interlaced mode.
+ */
+ if (mode->flags & DRM_MODE_FLAG_INTERLACE)
+ return ret;
+
+ /* preempt_disable_rt() should go right here in PREEMPT_RT patchset. */
+
+ /* Get optional system timestamp before query. */
+ if (stime)
+ *stime = ktime_get();
+
+ /*
+ * Read vertical scanline which is currently composed for our
+ * pixelvalve by the HVS, and also the scaler status.
+ */
+ val = HVS_READ(SCALER_DISPSTATX(vc4_crtc->channel));
+
+ /* Get optional system timestamp after query. */
+ if (etime)
+ *etime = ktime_get();
+
+ /* preempt_enable_rt() should go right here in PREEMPT_RT patchset. */
+
+ /* Vertical position of hvs composed scanline. */
+ *vpos = VC4_GET_FIELD(val, SCALER_DISPSTATX_LINE);
+
+ /* No hpos info available. */
+ if (hpos)
+ *hpos = 0;
+
+ /* This is the offset we need for translating hvs -> pv scanout pos. */
+ fifo_lines = vc4_crtc->cob_size / mode->crtc_hdisplay;
+
+ if (fifo_lines > 0)
+ ret |= DRM_SCANOUTPOS_VALID;
+
+ /* HVS more than fifo_lines into frame for compositing? */
+ if (*vpos > fifo_lines) {
+ /*
+ * We are in active scanout and can get some meaningful results
+ * from HVS. The actual PV scanout can not trail behind more
+ * than fifo_lines as that is the fifo's capacity. Assume that
+ * in active scanout the HVS and PV work in lockstep wrt. HVS
+ * refilling the fifo and PV consuming from the fifo, ie.
+ * whenever the PV consumes and frees up a scanline in the
+ * fifo, the HVS will immediately refill it, therefore
+ * incrementing vpos. Therefore we choose HVS read position -
+ * fifo size in scanlines as a estimate of the real scanout
+ * position of the PV.
+ */
+ *vpos -= fifo_lines + 1;
+ if (mode->flags & DRM_MODE_FLAG_INTERLACE)
+ *vpos /= 2;
+
+ ret |= DRM_SCANOUTPOS_ACCURATE;
+ return ret;
+ }
+
+ /*
+ * Less: This happens when we are in vblank and the HVS, after getting
+ * the VSTART restart signal from the PV, just started refilling its
+ * fifo with new lines from the top-most lines of the new framebuffers.
+ * The PV does not scan out in vblank, so does not remove lines from
+ * the fifo, so the fifo will be full quickly and the HVS has to pause.
+ * We can't get meaningful readings wrt. scanline position of the PV
+ * and need to make things up in a approximative but consistent way.
+ */
+ ret |= DRM_SCANOUTPOS_IN_VBLANK;
+ vblank_lines = mode->crtc_vtotal - mode->crtc_vdisplay;
+
+ if (flags & DRM_CALLED_FROM_VBLIRQ) {
+ /*
+ * Assume the irq handler got called close to first
+ * line of vblank, so PV has about a full vblank
+ * scanlines to go, and as a base timestamp use the
+ * one taken at entry into vblank irq handler, so it
+ * is not affected by random delays due to lock
+ * contention on event_lock or vblank_time lock in
+ * the core.
+ */
+ *vpos = -vblank_lines;
+
+ if (stime)
+ *stime = vc4_crtc->t_vblank;
+ if (etime)
+ *etime = vc4_crtc->t_vblank;
+
+ /*
+ * If the HVS fifo is not yet full then we know for certain
+ * we are at the very beginning of vblank, as the hvs just
+ * started refilling, and the stime and etime timestamps
+ * truly correspond to start of vblank.
+ */
+ if ((val & SCALER_DISPSTATX_FULL) != SCALER_DISPSTATX_FULL)
+ ret |= DRM_SCANOUTPOS_ACCURATE;
+ } else {
+ /*
+ * No clue where we are inside vblank. Return a vpos of zero,
+ * which will cause calling code to just return the etime
+ * timestamp uncorrected. At least this is no worse than the
+ * standard fallback.
+ */
+ *vpos = 0;
+ }
+
+ return ret;
+}
+
+int vc4_crtc_get_vblank_timestamp(struct drm_device *dev, unsigned int crtc_id,
+ int *max_error, struct timeval *vblank_time,
+ unsigned flags)
+{
+ struct vc4_dev *vc4 = to_vc4_dev(dev);
+ struct vc4_crtc *vc4_crtc = vc4->crtc[crtc_id];
+ struct drm_crtc *crtc = &vc4_crtc->base;
+ struct drm_crtc_state *state = crtc->state;
+
+ /* Helper routine in DRM core does all the work: */
+ return drm_calc_vbltimestamp_from_scanoutpos(dev, crtc_id, max_error,
+ vblank_time, flags,
+ &state->adjusted_mode);
+}
+
static void vc4_crtc_destroy(struct drm_crtc *crtc)
{
drm_crtc_cleanup(crtc);
@@ -175,20 +318,22 @@ vc4_crtc_lut_load(struct drm_crtc *crtc)
HVS_WRITE(SCALER_GAMDATA, vc4_crtc->lut_b[i]);
}
-static void
+static int
vc4_crtc_gamma_set(struct drm_crtc *crtc, u16 *r, u16 *g, u16 *b,
- uint32_t start, uint32_t size)
+ uint32_t size)
{
struct vc4_crtc *vc4_crtc = to_vc4_crtc(crtc);
u32 i;
- for (i = start; i < start + size; i++) {
+ for (i = 0; i < size; i++) {
vc4_crtc->lut_r[i] = r[i] >> 8;
vc4_crtc->lut_g[i] = g[i] >> 8;
vc4_crtc->lut_b[i] = b[i] >> 8;
}
vc4_crtc_lut_load(crtc);
+
+ return 0;
}
static u32 vc4_get_fifo_full_level(u32 format)
@@ -395,6 +540,7 @@ static int vc4_crtc_atomic_check(struct drm_crtc *crtc,
struct vc4_dev *vc4 = to_vc4_dev(dev);
struct drm_plane *plane;
unsigned long flags;
+ const struct drm_plane_state *plane_state;
u32 dlist_count = 0;
int ret;
@@ -404,18 +550,8 @@ static int vc4_crtc_atomic_check(struct drm_crtc *crtc,
if (hweight32(state->connector_mask) > 1)
return -EINVAL;
- drm_atomic_crtc_state_for_each_plane(plane, state) {
- struct drm_plane_state *plane_state =
- state->state->plane_states[drm_plane_index(plane)];
-
- /* plane might not have changed, in which case take
- * current state:
- */
- if (!plane_state)
- plane_state = plane->state;
-
+ drm_atomic_crtc_state_for_each_plane_state(plane, plane_state, state)
dlist_count += vc4_plane_dlist_size(plane_state);
- }
dlist_count++; /* Account for SCALER_CTL0_END. */
@@ -526,6 +662,7 @@ static irqreturn_t vc4_crtc_irq_handler(int irq, void *data)
irqreturn_t ret = IRQ_NONE;
if (stat & PV_INT_VFP_START) {
+ vc4_crtc->t_vblank = ktime_get();
CRTC_WRITE(PV_INTSTAT, PV_INT_VFP_START);
drm_crtc_handle_vblank(&vc4_crtc->base);
vc4_crtc_handle_page_flip(vc4_crtc);
@@ -730,6 +867,22 @@ static void vc4_set_crtc_possible_masks(struct drm_device *drm,
}
}
+static void
+vc4_crtc_get_cob_allocation(struct vc4_crtc *vc4_crtc)
+{
+ struct drm_device *drm = vc4_crtc->base.dev;
+ struct vc4_dev *vc4 = to_vc4_dev(drm);
+ u32 dispbase = HVS_READ(SCALER_DISPBASEX(vc4_crtc->channel));
+ /* Top/base are supposed to be 4-pixel aligned, but the
+ * Raspberry Pi firmware fills the low bits (which are
+ * presumably ignored).
+ */
+ u32 top = VC4_GET_FIELD(dispbase, SCALER_DISPBASEX_TOP) & ~3;
+ u32 base = VC4_GET_FIELD(dispbase, SCALER_DISPBASEX_BASE) & ~3;
+
+ vc4_crtc->cob_size = top - base + 4;
+}
+
static int vc4_crtc_bind(struct device *dev, struct device *master, void *data)
{
struct platform_device *pdev = to_platform_device(dev);
@@ -806,6 +959,8 @@ static int vc4_crtc_bind(struct device *dev, struct device *master, void *data)
crtc->cursor = cursor_plane;
}
+ vc4_crtc_get_cob_allocation(vc4_crtc);
+
CRTC_WRITE(PV_INTEN, 0);
CRTC_WRITE(PV_INTSTAT, PV_INT_VFP_START);
ret = devm_request_irq(dev, platform_get_irq(pdev, 0),