summaryrefslogtreecommitdiff
path: root/drivers/hid/hid-rmi.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/hid/hid-rmi.c')
-rw-r--r--drivers/hid/hid-rmi.c1282
1 files changed, 1282 insertions, 0 deletions
diff --git a/drivers/hid/hid-rmi.c b/drivers/hid/hid-rmi.c
new file mode 100644
index 000000000..368ffdf2c
--- /dev/null
+++ b/drivers/hid/hid-rmi.c
@@ -0,0 +1,1282 @@
+/*
+ * Copyright (c) 2013 Andrew Duggan <aduggan@synaptics.com>
+ * Copyright (c) 2013 Synaptics Incorporated
+ * Copyright (c) 2014 Benjamin Tissoires <benjamin.tissoires@gmail.com>
+ * Copyright (c) 2014 Red Hat, Inc
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the Free
+ * Software Foundation; either version 2 of the License, or (at your option)
+ * any later version.
+ */
+
+#include <linux/kernel.h>
+#include <linux/hid.h>
+#include <linux/input.h>
+#include <linux/input/mt.h>
+#include <linux/module.h>
+#include <linux/pm.h>
+#include <linux/slab.h>
+#include <linux/wait.h>
+#include <linux/sched.h>
+#include "hid-ids.h"
+
+#define RMI_MOUSE_REPORT_ID 0x01 /* Mouse emulation Report */
+#define RMI_WRITE_REPORT_ID 0x09 /* Output Report */
+#define RMI_READ_ADDR_REPORT_ID 0x0a /* Output Report */
+#define RMI_READ_DATA_REPORT_ID 0x0b /* Input Report */
+#define RMI_ATTN_REPORT_ID 0x0c /* Input Report */
+#define RMI_SET_RMI_MODE_REPORT_ID 0x0f /* Feature Report */
+
+/* flags */
+#define RMI_READ_REQUEST_PENDING BIT(0)
+#define RMI_READ_DATA_PENDING BIT(1)
+#define RMI_STARTED BIT(2)
+
+/* device flags */
+#define RMI_DEVICE BIT(0)
+#define RMI_DEVICE_HAS_PHYS_BUTTONS BIT(1)
+
+enum rmi_mode_type {
+ RMI_MODE_OFF = 0,
+ RMI_MODE_ATTN_REPORTS = 1,
+ RMI_MODE_NO_PACKED_ATTN_REPORTS = 2,
+};
+
+struct rmi_function {
+ unsigned page; /* page of the function */
+ u16 query_base_addr; /* base address for queries */
+ u16 command_base_addr; /* base address for commands */
+ u16 control_base_addr; /* base address for controls */
+ u16 data_base_addr; /* base address for datas */
+ unsigned int interrupt_base; /* cross-function interrupt number
+ * (uniq in the device)*/
+ unsigned int interrupt_count; /* number of interrupts */
+ unsigned int report_size; /* size of a report */
+ unsigned long irq_mask; /* mask of the interrupts
+ * (to be applied against ATTN IRQ) */
+};
+
+/**
+ * struct rmi_data - stores information for hid communication
+ *
+ * @page_mutex: Locks current page to avoid changing pages in unexpected ways.
+ * @page: Keeps track of the current virtual page
+ *
+ * @wait: Used for waiting for read data
+ *
+ * @writeReport: output buffer when writing RMI registers
+ * @readReport: input buffer when reading RMI registers
+ *
+ * @input_report_size: size of an input report (advertised by HID)
+ * @output_report_size: size of an output report (advertised by HID)
+ *
+ * @flags: flags for the current device (started, reading, etc...)
+ *
+ * @f11: placeholder of internal RMI function F11 description
+ * @f30: placeholder of internal RMI function F30 description
+ *
+ * @max_fingers: maximum finger count reported by the device
+ * @max_x: maximum x value reported by the device
+ * @max_y: maximum y value reported by the device
+ *
+ * @gpio_led_count: count of GPIOs + LEDs reported by F30
+ * @button_count: actual physical buttons count
+ * @button_mask: button mask used to decode GPIO ATTN reports
+ * @button_state_mask: pull state of the buttons
+ *
+ * @input: pointer to the kernel input device
+ *
+ * @reset_work: worker which will be called in case of a mouse report
+ * @hdev: pointer to the struct hid_device
+ */
+struct rmi_data {
+ struct mutex page_mutex;
+ int page;
+
+ wait_queue_head_t wait;
+
+ u8 *writeReport;
+ u8 *readReport;
+
+ int input_report_size;
+ int output_report_size;
+
+ unsigned long flags;
+
+ struct rmi_function f01;
+ struct rmi_function f11;
+ struct rmi_function f30;
+
+ unsigned int max_fingers;
+ unsigned int max_x;
+ unsigned int max_y;
+ unsigned int x_size_mm;
+ unsigned int y_size_mm;
+
+ unsigned int gpio_led_count;
+ unsigned int button_count;
+ unsigned long button_mask;
+ unsigned long button_state_mask;
+
+ struct input_dev *input;
+
+ struct work_struct reset_work;
+ struct hid_device *hdev;
+
+ unsigned long device_flags;
+ unsigned long firmware_id;
+};
+
+#define RMI_PAGE(addr) (((addr) >> 8) & 0xff)
+
+static int rmi_write_report(struct hid_device *hdev, u8 *report, int len);
+
+/**
+ * rmi_set_page - Set RMI page
+ * @hdev: The pointer to the hid_device struct
+ * @page: The new page address.
+ *
+ * RMI devices have 16-bit addressing, but some of the physical
+ * implementations (like SMBus) only have 8-bit addressing. So RMI implements
+ * a page address at 0xff of every page so we can reliable page addresses
+ * every 256 registers.
+ *
+ * The page_mutex lock must be held when this function is entered.
+ *
+ * Returns zero on success, non-zero on failure.
+ */
+static int rmi_set_page(struct hid_device *hdev, u8 page)
+{
+ struct rmi_data *data = hid_get_drvdata(hdev);
+ int retval;
+
+ data->writeReport[0] = RMI_WRITE_REPORT_ID;
+ data->writeReport[1] = 1;
+ data->writeReport[2] = 0xFF;
+ data->writeReport[4] = page;
+
+ retval = rmi_write_report(hdev, data->writeReport,
+ data->output_report_size);
+ if (retval != data->output_report_size) {
+ dev_err(&hdev->dev,
+ "%s: set page failed: %d.", __func__, retval);
+ return retval;
+ }
+
+ data->page = page;
+ return 0;
+}
+
+static int rmi_set_mode(struct hid_device *hdev, u8 mode)
+{
+ int ret;
+ u8 txbuf[2] = {RMI_SET_RMI_MODE_REPORT_ID, mode};
+
+ ret = hid_hw_raw_request(hdev, RMI_SET_RMI_MODE_REPORT_ID, txbuf,
+ sizeof(txbuf), HID_FEATURE_REPORT, HID_REQ_SET_REPORT);
+ if (ret < 0) {
+ dev_err(&hdev->dev, "unable to set rmi mode to %d (%d)\n", mode,
+ ret);
+ return ret;
+ }
+
+ return 0;
+}
+
+static int rmi_write_report(struct hid_device *hdev, u8 *report, int len)
+{
+ int ret;
+
+ ret = hid_hw_output_report(hdev, (void *)report, len);
+ if (ret < 0) {
+ dev_err(&hdev->dev, "failed to write hid report (%d)\n", ret);
+ return ret;
+ }
+
+ return ret;
+}
+
+static int rmi_read_block(struct hid_device *hdev, u16 addr, void *buf,
+ const int len)
+{
+ struct rmi_data *data = hid_get_drvdata(hdev);
+ int ret;
+ int bytes_read;
+ int bytes_needed;
+ int retries;
+ int read_input_count;
+
+ mutex_lock(&data->page_mutex);
+
+ if (RMI_PAGE(addr) != data->page) {
+ ret = rmi_set_page(hdev, RMI_PAGE(addr));
+ if (ret < 0)
+ goto exit;
+ }
+
+ for (retries = 5; retries > 0; retries--) {
+ data->writeReport[0] = RMI_READ_ADDR_REPORT_ID;
+ data->writeReport[1] = 0; /* old 1 byte read count */
+ data->writeReport[2] = addr & 0xFF;
+ data->writeReport[3] = (addr >> 8) & 0xFF;
+ data->writeReport[4] = len & 0xFF;
+ data->writeReport[5] = (len >> 8) & 0xFF;
+
+ set_bit(RMI_READ_REQUEST_PENDING, &data->flags);
+
+ ret = rmi_write_report(hdev, data->writeReport,
+ data->output_report_size);
+ if (ret != data->output_report_size) {
+ clear_bit(RMI_READ_REQUEST_PENDING, &data->flags);
+ dev_err(&hdev->dev,
+ "failed to write request output report (%d)\n",
+ ret);
+ goto exit;
+ }
+
+ bytes_read = 0;
+ bytes_needed = len;
+ while (bytes_read < len) {
+ if (!wait_event_timeout(data->wait,
+ test_bit(RMI_READ_DATA_PENDING, &data->flags),
+ msecs_to_jiffies(1000))) {
+ hid_warn(hdev, "%s: timeout elapsed\n",
+ __func__);
+ ret = -EAGAIN;
+ break;
+ }
+
+ read_input_count = data->readReport[1];
+ memcpy(buf + bytes_read, &data->readReport[2],
+ read_input_count < bytes_needed ?
+ read_input_count : bytes_needed);
+
+ bytes_read += read_input_count;
+ bytes_needed -= read_input_count;
+ clear_bit(RMI_READ_DATA_PENDING, &data->flags);
+ }
+
+ if (ret >= 0) {
+ ret = 0;
+ break;
+ }
+ }
+
+exit:
+ clear_bit(RMI_READ_REQUEST_PENDING, &data->flags);
+ mutex_unlock(&data->page_mutex);
+ return ret;
+}
+
+static inline int rmi_read(struct hid_device *hdev, u16 addr, void *buf)
+{
+ return rmi_read_block(hdev, addr, buf, 1);
+}
+
+static int rmi_write_block(struct hid_device *hdev, u16 addr, void *buf,
+ const int len)
+{
+ struct rmi_data *data = hid_get_drvdata(hdev);
+ int ret;
+
+ mutex_lock(&data->page_mutex);
+
+ if (RMI_PAGE(addr) != data->page) {
+ ret = rmi_set_page(hdev, RMI_PAGE(addr));
+ if (ret < 0)
+ goto exit;
+ }
+
+ data->writeReport[0] = RMI_WRITE_REPORT_ID;
+ data->writeReport[1] = len;
+ data->writeReport[2] = addr & 0xFF;
+ data->writeReport[3] = (addr >> 8) & 0xFF;
+ memcpy(&data->writeReport[4], buf, len);
+
+ ret = rmi_write_report(hdev, data->writeReport,
+ data->output_report_size);
+ if (ret < 0) {
+ dev_err(&hdev->dev,
+ "failed to write request output report (%d)\n",
+ ret);
+ goto exit;
+ }
+ ret = 0;
+
+exit:
+ mutex_unlock(&data->page_mutex);
+ return ret;
+}
+
+static inline int rmi_write(struct hid_device *hdev, u16 addr, void *buf)
+{
+ return rmi_write_block(hdev, addr, buf, 1);
+}
+
+static void rmi_f11_process_touch(struct rmi_data *hdata, int slot,
+ u8 finger_state, u8 *touch_data)
+{
+ int x, y, wx, wy;
+ int wide, major, minor;
+ int z;
+
+ input_mt_slot(hdata->input, slot);
+ input_mt_report_slot_state(hdata->input, MT_TOOL_FINGER,
+ finger_state == 0x01);
+ if (finger_state == 0x01) {
+ x = (touch_data[0] << 4) | (touch_data[2] & 0x0F);
+ y = (touch_data[1] << 4) | (touch_data[2] >> 4);
+ wx = touch_data[3] & 0x0F;
+ wy = touch_data[3] >> 4;
+ wide = (wx > wy);
+ major = max(wx, wy);
+ minor = min(wx, wy);
+ z = touch_data[4];
+
+ /* y is inverted */
+ y = hdata->max_y - y;
+
+ input_event(hdata->input, EV_ABS, ABS_MT_POSITION_X, x);
+ input_event(hdata->input, EV_ABS, ABS_MT_POSITION_Y, y);
+ input_event(hdata->input, EV_ABS, ABS_MT_ORIENTATION, wide);
+ input_event(hdata->input, EV_ABS, ABS_MT_PRESSURE, z);
+ input_event(hdata->input, EV_ABS, ABS_MT_TOUCH_MAJOR, major);
+ input_event(hdata->input, EV_ABS, ABS_MT_TOUCH_MINOR, minor);
+ }
+}
+
+static void rmi_reset_work(struct work_struct *work)
+{
+ struct rmi_data *hdata = container_of(work, struct rmi_data,
+ reset_work);
+
+ /* switch the device to RMI if we receive a generic mouse report */
+ rmi_set_mode(hdata->hdev, RMI_MODE_ATTN_REPORTS);
+}
+
+static inline int rmi_schedule_reset(struct hid_device *hdev)
+{
+ struct rmi_data *hdata = hid_get_drvdata(hdev);
+ return schedule_work(&hdata->reset_work);
+}
+
+static int rmi_f11_input_event(struct hid_device *hdev, u8 irq, u8 *data,
+ int size)
+{
+ struct rmi_data *hdata = hid_get_drvdata(hdev);
+ int offset;
+ int i;
+
+ if (!(irq & hdata->f11.irq_mask) || size <= 0)
+ return 0;
+
+ offset = (hdata->max_fingers >> 2) + 1;
+ for (i = 0; i < hdata->max_fingers; i++) {
+ int fs_byte_position = i >> 2;
+ int fs_bit_position = (i & 0x3) << 1;
+ int finger_state = (data[fs_byte_position] >> fs_bit_position) &
+ 0x03;
+ int position = offset + 5 * i;
+
+ if (position + 5 > size) {
+ /* partial report, go on with what we received */
+ printk_once(KERN_WARNING
+ "%s %s: Detected incomplete finger report. Finger reports may occasionally get dropped on this platform.\n",
+ dev_driver_string(&hdev->dev),
+ dev_name(&hdev->dev));
+ hid_dbg(hdev, "Incomplete finger report\n");
+ break;
+ }
+
+ rmi_f11_process_touch(hdata, i, finger_state, &data[position]);
+ }
+ input_mt_sync_frame(hdata->input);
+ input_sync(hdata->input);
+ return hdata->f11.report_size;
+}
+
+static int rmi_f30_input_event(struct hid_device *hdev, u8 irq, u8 *data,
+ int size)
+{
+ struct rmi_data *hdata = hid_get_drvdata(hdev);
+ int i;
+ int button = 0;
+ bool value;
+
+ if (!(irq & hdata->f30.irq_mask))
+ return 0;
+
+ if (size < (int)hdata->f30.report_size) {
+ hid_warn(hdev, "Click Button pressed, but the click data is missing\n");
+ return 0;
+ }
+
+ for (i = 0; i < hdata->gpio_led_count; i++) {
+ if (test_bit(i, &hdata->button_mask)) {
+ value = (data[i / 8] >> (i & 0x07)) & BIT(0);
+ if (test_bit(i, &hdata->button_state_mask))
+ value = !value;
+ input_event(hdata->input, EV_KEY, BTN_LEFT + button++,
+ value);
+ }
+ }
+ return hdata->f30.report_size;
+}
+
+static int rmi_input_event(struct hid_device *hdev, u8 *data, int size)
+{
+ struct rmi_data *hdata = hid_get_drvdata(hdev);
+ unsigned long irq_mask = 0;
+ unsigned index = 2;
+
+ if (!(test_bit(RMI_STARTED, &hdata->flags)))
+ return 0;
+
+ irq_mask |= hdata->f11.irq_mask;
+ irq_mask |= hdata->f30.irq_mask;
+
+ if (data[1] & ~irq_mask)
+ hid_dbg(hdev, "unknown intr source:%02lx %s:%d\n",
+ data[1] & ~irq_mask, __FILE__, __LINE__);
+
+ if (hdata->f11.interrupt_base < hdata->f30.interrupt_base) {
+ index += rmi_f11_input_event(hdev, data[1], &data[index],
+ size - index);
+ index += rmi_f30_input_event(hdev, data[1], &data[index],
+ size - index);
+ } else {
+ index += rmi_f30_input_event(hdev, data[1], &data[index],
+ size - index);
+ index += rmi_f11_input_event(hdev, data[1], &data[index],
+ size - index);
+ }
+
+ return 1;
+}
+
+static int rmi_read_data_event(struct hid_device *hdev, u8 *data, int size)
+{
+ struct rmi_data *hdata = hid_get_drvdata(hdev);
+
+ if (!test_bit(RMI_READ_REQUEST_PENDING, &hdata->flags)) {
+ hid_dbg(hdev, "no read request pending\n");
+ return 0;
+ }
+
+ memcpy(hdata->readReport, data, size < hdata->input_report_size ?
+ size : hdata->input_report_size);
+ set_bit(RMI_READ_DATA_PENDING, &hdata->flags);
+ wake_up(&hdata->wait);
+
+ return 1;
+}
+
+static int rmi_check_sanity(struct hid_device *hdev, u8 *data, int size)
+{
+ int valid_size = size;
+ /*
+ * On the Dell XPS 13 9333, the bus sometimes get confused and fills
+ * the report with a sentinel value "ff". Synaptics told us that such
+ * behavior does not comes from the touchpad itself, so we filter out
+ * such reports here.
+ */
+
+ while ((data[valid_size - 1] == 0xff) && valid_size > 0)
+ valid_size--;
+
+ return valid_size;
+}
+
+static int rmi_raw_event(struct hid_device *hdev,
+ struct hid_report *report, u8 *data, int size)
+{
+ size = rmi_check_sanity(hdev, data, size);
+ if (size < 2)
+ return 0;
+
+ switch (data[0]) {
+ case RMI_READ_DATA_REPORT_ID:
+ return rmi_read_data_event(hdev, data, size);
+ case RMI_ATTN_REPORT_ID:
+ return rmi_input_event(hdev, data, size);
+ default:
+ return 1;
+ }
+
+ return 0;
+}
+
+static int rmi_event(struct hid_device *hdev, struct hid_field *field,
+ struct hid_usage *usage, __s32 value)
+{
+ struct rmi_data *data = hid_get_drvdata(hdev);
+
+ if ((data->device_flags & RMI_DEVICE) &&
+ (field->application == HID_GD_POINTER ||
+ field->application == HID_GD_MOUSE)) {
+ if (data->device_flags & RMI_DEVICE_HAS_PHYS_BUTTONS) {
+ if ((usage->hid & HID_USAGE_PAGE) == HID_UP_BUTTON)
+ return 0;
+
+ if ((usage->hid == HID_GD_X || usage->hid == HID_GD_Y)
+ && !value)
+ return 1;
+ }
+
+ rmi_schedule_reset(hdev);
+ return 1;
+ }
+
+ return 0;
+}
+
+#ifdef CONFIG_PM
+static int rmi_post_reset(struct hid_device *hdev)
+{
+ return rmi_set_mode(hdev, RMI_MODE_ATTN_REPORTS);
+}
+
+static int rmi_post_resume(struct hid_device *hdev)
+{
+ return rmi_set_mode(hdev, RMI_MODE_ATTN_REPORTS);
+}
+#endif /* CONFIG_PM */
+
+#define RMI4_MAX_PAGE 0xff
+#define RMI4_PAGE_SIZE 0x0100
+
+#define PDT_START_SCAN_LOCATION 0x00e9
+#define PDT_END_SCAN_LOCATION 0x0005
+#define RMI4_END_OF_PDT(id) ((id) == 0x00 || (id) == 0xff)
+
+struct pdt_entry {
+ u8 query_base_addr:8;
+ u8 command_base_addr:8;
+ u8 control_base_addr:8;
+ u8 data_base_addr:8;
+ u8 interrupt_source_count:3;
+ u8 bits3and4:2;
+ u8 function_version:2;
+ u8 bit7:1;
+ u8 function_number:8;
+} __attribute__((__packed__));
+
+static inline unsigned long rmi_gen_mask(unsigned irq_base, unsigned irq_count)
+{
+ return GENMASK(irq_count + irq_base - 1, irq_base);
+}
+
+static void rmi_register_function(struct rmi_data *data,
+ struct pdt_entry *pdt_entry, int page, unsigned interrupt_count)
+{
+ struct rmi_function *f = NULL;
+ u16 page_base = page << 8;
+
+ switch (pdt_entry->function_number) {
+ case 0x01:
+ f = &data->f01;
+ break;
+ case 0x11:
+ f = &data->f11;
+ break;
+ case 0x30:
+ f = &data->f30;
+ break;
+ }
+
+ if (f) {
+ f->page = page;
+ f->query_base_addr = page_base | pdt_entry->query_base_addr;
+ f->command_base_addr = page_base | pdt_entry->command_base_addr;
+ f->control_base_addr = page_base | pdt_entry->control_base_addr;
+ f->data_base_addr = page_base | pdt_entry->data_base_addr;
+ f->interrupt_base = interrupt_count;
+ f->interrupt_count = pdt_entry->interrupt_source_count;
+ f->irq_mask = rmi_gen_mask(f->interrupt_base,
+ f->interrupt_count);
+ }
+}
+
+static int rmi_scan_pdt(struct hid_device *hdev)
+{
+ struct rmi_data *data = hid_get_drvdata(hdev);
+ struct pdt_entry entry;
+ int page;
+ bool page_has_function;
+ int i;
+ int retval;
+ int interrupt = 0;
+ u16 page_start, pdt_start , pdt_end;
+
+ hid_info(hdev, "Scanning PDT...\n");
+
+ for (page = 0; (page <= RMI4_MAX_PAGE); page++) {
+ page_start = RMI4_PAGE_SIZE * page;
+ pdt_start = page_start + PDT_START_SCAN_LOCATION;
+ pdt_end = page_start + PDT_END_SCAN_LOCATION;
+
+ page_has_function = false;
+ for (i = pdt_start; i >= pdt_end; i -= sizeof(entry)) {
+ retval = rmi_read_block(hdev, i, &entry, sizeof(entry));
+ if (retval) {
+ hid_err(hdev,
+ "Read of PDT entry at %#06x failed.\n",
+ i);
+ goto error_exit;
+ }
+
+ if (RMI4_END_OF_PDT(entry.function_number))
+ break;
+
+ page_has_function = true;
+
+ hid_info(hdev, "Found F%02X on page %#04x\n",
+ entry.function_number, page);
+
+ rmi_register_function(data, &entry, page, interrupt);
+ interrupt += entry.interrupt_source_count;
+ }
+
+ if (!page_has_function)
+ break;
+ }
+
+ hid_info(hdev, "%s: Done with PDT scan.\n", __func__);
+ retval = 0;
+
+error_exit:
+ return retval;
+}
+
+#define RMI_DEVICE_F01_BASIC_QUERY_LEN 11
+
+static int rmi_populate_f01(struct hid_device *hdev)
+{
+ struct rmi_data *data = hid_get_drvdata(hdev);
+ u8 basic_queries[RMI_DEVICE_F01_BASIC_QUERY_LEN];
+ u8 info[3];
+ int ret;
+ bool has_query42;
+ bool has_lts;
+ bool has_sensor_id;
+ bool has_ds4_queries = false;
+ bool has_build_id_query = false;
+ bool has_package_id_query = false;
+ u16 query_offset = data->f01.query_base_addr;
+ u16 prod_info_addr;
+ u8 ds4_query_len;
+
+ ret = rmi_read_block(hdev, query_offset, basic_queries,
+ RMI_DEVICE_F01_BASIC_QUERY_LEN);
+ if (ret) {
+ hid_err(hdev, "Can not read basic queries from Function 0x1.\n");
+ return ret;
+ }
+
+ has_lts = !!(basic_queries[0] & BIT(2));
+ has_sensor_id = !!(basic_queries[1] & BIT(3));
+ has_query42 = !!(basic_queries[1] & BIT(7));
+
+ query_offset += 11;
+ prod_info_addr = query_offset + 6;
+ query_offset += 10;
+
+ if (has_lts)
+ query_offset += 20;
+
+ if (has_sensor_id)
+ query_offset++;
+
+ if (has_query42) {
+ ret = rmi_read(hdev, query_offset, info);
+ if (ret) {
+ hid_err(hdev, "Can not read query42.\n");
+ return ret;
+ }
+ has_ds4_queries = !!(info[0] & BIT(0));
+ query_offset++;
+ }
+
+ if (has_ds4_queries) {
+ ret = rmi_read(hdev, query_offset, &ds4_query_len);
+ if (ret) {
+ hid_err(hdev, "Can not read DS4 Query length.\n");
+ return ret;
+ }
+ query_offset++;
+
+ if (ds4_query_len > 0) {
+ ret = rmi_read(hdev, query_offset, info);
+ if (ret) {
+ hid_err(hdev, "Can not read DS4 query.\n");
+ return ret;
+ }
+
+ has_package_id_query = !!(info[0] & BIT(0));
+ has_build_id_query = !!(info[0] & BIT(1));
+ }
+ }
+
+ if (has_package_id_query)
+ prod_info_addr++;
+
+ if (has_build_id_query) {
+ ret = rmi_read_block(hdev, prod_info_addr, info, 3);
+ if (ret) {
+ hid_err(hdev, "Can not read product info.\n");
+ return ret;
+ }
+
+ data->firmware_id = info[1] << 8 | info[0];
+ data->firmware_id += info[2] * 65536;
+ }
+
+ return 0;
+}
+
+static int rmi_populate_f11(struct hid_device *hdev)
+{
+ struct rmi_data *data = hid_get_drvdata(hdev);
+ u8 buf[20];
+ int ret;
+ bool has_query9;
+ bool has_query10 = false;
+ bool has_query11;
+ bool has_query12;
+ bool has_query27;
+ bool has_query28;
+ bool has_query36 = false;
+ bool has_physical_props;
+ bool has_gestures;
+ bool has_rel;
+ bool has_data40 = false;
+ bool has_dribble = false;
+ bool has_palm_detect = false;
+ unsigned x_size, y_size;
+ u16 query_offset;
+
+ if (!data->f11.query_base_addr) {
+ hid_err(hdev, "No 2D sensor found, giving up.\n");
+ return -ENODEV;
+ }
+
+ /* query 0 contains some useful information */
+ ret = rmi_read(hdev, data->f11.query_base_addr, buf);
+ if (ret) {
+ hid_err(hdev, "can not get query 0: %d.\n", ret);
+ return ret;
+ }
+ has_query9 = !!(buf[0] & BIT(3));
+ has_query11 = !!(buf[0] & BIT(4));
+ has_query12 = !!(buf[0] & BIT(5));
+ has_query27 = !!(buf[0] & BIT(6));
+ has_query28 = !!(buf[0] & BIT(7));
+
+ /* query 1 to get the max number of fingers */
+ ret = rmi_read(hdev, data->f11.query_base_addr + 1, buf);
+ if (ret) {
+ hid_err(hdev, "can not get NumberOfFingers: %d.\n", ret);
+ return ret;
+ }
+ data->max_fingers = (buf[0] & 0x07) + 1;
+ if (data->max_fingers > 5)
+ data->max_fingers = 10;
+
+ data->f11.report_size = data->max_fingers * 5 +
+ DIV_ROUND_UP(data->max_fingers, 4);
+
+ if (!(buf[0] & BIT(4))) {
+ hid_err(hdev, "No absolute events, giving up.\n");
+ return -ENODEV;
+ }
+
+ has_rel = !!(buf[0] & BIT(3));
+ has_gestures = !!(buf[0] & BIT(5));
+
+ ret = rmi_read(hdev, data->f11.query_base_addr + 5, buf);
+ if (ret) {
+ hid_err(hdev, "can not get absolute data sources: %d.\n", ret);
+ return ret;
+ }
+
+ has_dribble = !!(buf[0] & BIT(4));
+
+ /*
+ * At least 4 queries are guaranteed to be present in F11
+ * +1 for query 5 which is present since absolute events are
+ * reported and +1 for query 12.
+ */
+ query_offset = 6;
+
+ if (has_rel)
+ ++query_offset; /* query 6 is present */
+
+ if (has_gestures) {
+ /* query 8 to find out if query 10 exists */
+ ret = rmi_read(hdev,
+ data->f11.query_base_addr + query_offset + 1, buf);
+ if (ret) {
+ hid_err(hdev, "can not read gesture information: %d.\n",
+ ret);
+ return ret;
+ }
+ has_palm_detect = !!(buf[0] & BIT(0));
+ has_query10 = !!(buf[0] & BIT(2));
+
+ query_offset += 2; /* query 7 and 8 are present */
+ }
+
+ if (has_query9)
+ ++query_offset;
+
+ if (has_query10)
+ ++query_offset;
+
+ if (has_query11)
+ ++query_offset;
+
+ /* query 12 to know if the physical properties are reported */
+ if (has_query12) {
+ ret = rmi_read(hdev, data->f11.query_base_addr
+ + query_offset, buf);
+ if (ret) {
+ hid_err(hdev, "can not get query 12: %d.\n", ret);
+ return ret;
+ }
+ has_physical_props = !!(buf[0] & BIT(5));
+
+ if (has_physical_props) {
+ query_offset += 1;
+ ret = rmi_read_block(hdev,
+ data->f11.query_base_addr
+ + query_offset, buf, 4);
+ if (ret) {
+ hid_err(hdev, "can not read query 15-18: %d.\n",
+ ret);
+ return ret;
+ }
+
+ x_size = buf[0] | (buf[1] << 8);
+ y_size = buf[2] | (buf[3] << 8);
+
+ data->x_size_mm = DIV_ROUND_CLOSEST(x_size, 10);
+ data->y_size_mm = DIV_ROUND_CLOSEST(y_size, 10);
+
+ hid_info(hdev, "%s: size in mm: %d x %d\n",
+ __func__, data->x_size_mm, data->y_size_mm);
+
+ /*
+ * query 15 - 18 contain the size of the sensor
+ * and query 19 - 26 contain bezel dimensions
+ */
+ query_offset += 12;
+ }
+ }
+
+ if (has_query27)
+ ++query_offset;
+
+ if (has_query28) {
+ ret = rmi_read(hdev, data->f11.query_base_addr
+ + query_offset, buf);
+ if (ret) {
+ hid_err(hdev, "can not get query 28: %d.\n", ret);
+ return ret;
+ }
+
+ has_query36 = !!(buf[0] & BIT(6));
+ }
+
+ if (has_query36) {
+ query_offset += 2;
+ ret = rmi_read(hdev, data->f11.query_base_addr
+ + query_offset, buf);
+ if (ret) {
+ hid_err(hdev, "can not get query 36: %d.\n", ret);
+ return ret;
+ }
+
+ has_data40 = !!(buf[0] & BIT(5));
+ }
+
+
+ if (has_data40)
+ data->f11.report_size += data->max_fingers * 2;
+
+ /*
+ * retrieve the ctrl registers
+ * the ctrl register has a size of 20 but a fw bug split it into 16 + 4,
+ * and there is no way to know if the first 20 bytes are here or not.
+ * We use only the first 12 bytes, so get only them.
+ */
+ ret = rmi_read_block(hdev, data->f11.control_base_addr, buf, 12);
+ if (ret) {
+ hid_err(hdev, "can not read ctrl block of size 11: %d.\n", ret);
+ return ret;
+ }
+
+ data->max_x = buf[6] | (buf[7] << 8);
+ data->max_y = buf[8] | (buf[9] << 8);
+
+ if (has_dribble) {
+ buf[0] = buf[0] & ~BIT(6);
+ ret = rmi_write(hdev, data->f11.control_base_addr, buf);
+ if (ret) {
+ hid_err(hdev, "can not write to control reg 0: %d.\n",
+ ret);
+ return ret;
+ }
+ }
+
+ if (has_palm_detect) {
+ buf[11] = buf[11] & ~BIT(0);
+ ret = rmi_write(hdev, data->f11.control_base_addr + 11,
+ &buf[11]);
+ if (ret) {
+ hid_err(hdev, "can not write to control reg 11: %d.\n",
+ ret);
+ return ret;
+ }
+ }
+
+ return 0;
+}
+
+static int rmi_populate_f30(struct hid_device *hdev)
+{
+ struct rmi_data *data = hid_get_drvdata(hdev);
+ u8 buf[20];
+ int ret;
+ bool has_gpio, has_led;
+ unsigned bytes_per_ctrl;
+ u8 ctrl2_addr;
+ int ctrl2_3_length;
+ int i;
+
+ /* function F30 is for physical buttons */
+ if (!data->f30.query_base_addr) {
+ hid_err(hdev, "No GPIO/LEDs found, giving up.\n");
+ return -ENODEV;
+ }
+
+ ret = rmi_read_block(hdev, data->f30.query_base_addr, buf, 2);
+ if (ret) {
+ hid_err(hdev, "can not get F30 query registers: %d.\n", ret);
+ return ret;
+ }
+
+ has_gpio = !!(buf[0] & BIT(3));
+ has_led = !!(buf[0] & BIT(2));
+ data->gpio_led_count = buf[1] & 0x1f;
+
+ /* retrieve ctrl 2 & 3 registers */
+ bytes_per_ctrl = (data->gpio_led_count + 7) / 8;
+ /* Ctrl0 is present only if both has_gpio and has_led are set*/
+ ctrl2_addr = (has_gpio && has_led) ? bytes_per_ctrl : 0;
+ /* Ctrl1 is always be present */
+ ctrl2_addr += bytes_per_ctrl;
+ ctrl2_3_length = 2 * bytes_per_ctrl;
+
+ data->f30.report_size = bytes_per_ctrl;
+
+ ret = rmi_read_block(hdev, data->f30.control_base_addr + ctrl2_addr,
+ buf, ctrl2_3_length);
+ if (ret) {
+ hid_err(hdev, "can not read ctrl 2&3 block of size %d: %d.\n",
+ ctrl2_3_length, ret);
+ return ret;
+ }
+
+ for (i = 0; i < data->gpio_led_count; i++) {
+ int byte_position = i >> 3;
+ int bit_position = i & 0x07;
+ u8 dir_byte = buf[byte_position];
+ u8 data_byte = buf[byte_position + bytes_per_ctrl];
+ bool dir = (dir_byte >> bit_position) & BIT(0);
+ bool dat = (data_byte >> bit_position) & BIT(0);
+
+ if (dir == 0) {
+ /* input mode */
+ if (dat) {
+ /* actual buttons have pull up resistor */
+ data->button_count++;
+ set_bit(i, &data->button_mask);
+ set_bit(i, &data->button_state_mask);
+ }
+ }
+
+ }
+
+ return 0;
+}
+
+static int rmi_populate(struct hid_device *hdev)
+{
+ int ret;
+
+ ret = rmi_scan_pdt(hdev);
+ if (ret) {
+ hid_err(hdev, "PDT scan failed with code %d.\n", ret);
+ return ret;
+ }
+
+ ret = rmi_populate_f01(hdev);
+ if (ret) {
+ hid_err(hdev, "Error while initializing F01 (%d).\n", ret);
+ return ret;
+ }
+
+ ret = rmi_populate_f11(hdev);
+ if (ret) {
+ hid_err(hdev, "Error while initializing F11 (%d).\n", ret);
+ return ret;
+ }
+
+ ret = rmi_populate_f30(hdev);
+ if (ret)
+ hid_warn(hdev, "Error while initializing F30 (%d).\n", ret);
+
+ return 0;
+}
+
+static void rmi_input_configured(struct hid_device *hdev, struct hid_input *hi)
+{
+ struct rmi_data *data = hid_get_drvdata(hdev);
+ struct input_dev *input = hi->input;
+ int ret;
+ int res_x, res_y, i;
+
+ data->input = input;
+
+ hid_dbg(hdev, "Opening low level driver\n");
+ ret = hid_hw_open(hdev);
+ if (ret)
+ return;
+
+ if (!(data->device_flags & RMI_DEVICE))
+ return;
+
+ /* Allow incoming hid reports */
+ hid_device_io_start(hdev);
+
+ ret = rmi_set_mode(hdev, RMI_MODE_ATTN_REPORTS);
+ if (ret < 0) {
+ dev_err(&hdev->dev, "failed to set rmi mode\n");
+ goto exit;
+ }
+
+ ret = rmi_set_page(hdev, 0);
+ if (ret < 0) {
+ dev_err(&hdev->dev, "failed to set page select to 0.\n");
+ goto exit;
+ }
+
+ ret = rmi_populate(hdev);
+ if (ret)
+ goto exit;
+
+ hid_info(hdev, "firmware id: %ld\n", data->firmware_id);
+
+ __set_bit(EV_ABS, input->evbit);
+ input_set_abs_params(input, ABS_MT_POSITION_X, 1, data->max_x, 0, 0);
+ input_set_abs_params(input, ABS_MT_POSITION_Y, 1, data->max_y, 0, 0);
+
+ if (data->x_size_mm && data->y_size_mm) {
+ res_x = (data->max_x - 1) / data->x_size_mm;
+ res_y = (data->max_y - 1) / data->y_size_mm;
+
+ input_abs_set_res(input, ABS_MT_POSITION_X, res_x);
+ input_abs_set_res(input, ABS_MT_POSITION_Y, res_y);
+ }
+
+ input_set_abs_params(input, ABS_MT_ORIENTATION, 0, 1, 0, 0);
+ input_set_abs_params(input, ABS_MT_PRESSURE, 0, 0xff, 0, 0);
+ input_set_abs_params(input, ABS_MT_TOUCH_MAJOR, 0, 0x0f, 0, 0);
+ input_set_abs_params(input, ABS_MT_TOUCH_MINOR, 0, 0x0f, 0, 0);
+
+ input_mt_init_slots(input, data->max_fingers, INPUT_MT_POINTER);
+
+ if (data->button_count) {
+ __set_bit(EV_KEY, input->evbit);
+ for (i = 0; i < data->button_count; i++)
+ __set_bit(BTN_LEFT + i, input->keybit);
+
+ if (data->button_count == 1)
+ __set_bit(INPUT_PROP_BUTTONPAD, input->propbit);
+ }
+
+ set_bit(RMI_STARTED, &data->flags);
+
+exit:
+ hid_device_io_stop(hdev);
+ hid_hw_close(hdev);
+}
+
+static int rmi_input_mapping(struct hid_device *hdev,
+ struct hid_input *hi, struct hid_field *field,
+ struct hid_usage *usage, unsigned long **bit, int *max)
+{
+ struct rmi_data *data = hid_get_drvdata(hdev);
+
+ /*
+ * we want to make HID ignore the advertised HID collection
+ * for RMI deivces
+ */
+ if (data->device_flags & RMI_DEVICE) {
+ if ((data->device_flags & RMI_DEVICE_HAS_PHYS_BUTTONS) &&
+ ((usage->hid & HID_USAGE_PAGE) == HID_UP_BUTTON))
+ return 0;
+
+ return -1;
+ }
+
+ return 0;
+}
+
+static int rmi_check_valid_report_id(struct hid_device *hdev, unsigned type,
+ unsigned id, struct hid_report **report)
+{
+ int i;
+
+ *report = hdev->report_enum[type].report_id_hash[id];
+ if (*report) {
+ for (i = 0; i < (*report)->maxfield; i++) {
+ unsigned app = (*report)->field[i]->application;
+ if ((app & HID_USAGE_PAGE) >= HID_UP_MSVENDOR)
+ return 1;
+ }
+ }
+
+ return 0;
+}
+
+static int rmi_probe(struct hid_device *hdev, const struct hid_device_id *id)
+{
+ struct rmi_data *data = NULL;
+ int ret;
+ size_t alloc_size;
+ struct hid_report *input_report;
+ struct hid_report *output_report;
+ struct hid_report *feature_report;
+
+ data = devm_kzalloc(&hdev->dev, sizeof(struct rmi_data), GFP_KERNEL);
+ if (!data)
+ return -ENOMEM;
+
+ INIT_WORK(&data->reset_work, rmi_reset_work);
+ data->hdev = hdev;
+
+ hid_set_drvdata(hdev, data);
+
+ hdev->quirks |= HID_QUIRK_NO_INIT_REPORTS;
+
+ ret = hid_parse(hdev);
+ if (ret) {
+ hid_err(hdev, "parse failed\n");
+ return ret;
+ }
+
+ if (id->driver_data)
+ data->device_flags = id->driver_data;
+
+ /*
+ * Check for the RMI specific report ids. If they are misisng
+ * simply return and let the events be processed by hid-input
+ */
+ if (!rmi_check_valid_report_id(hdev, HID_FEATURE_REPORT,
+ RMI_SET_RMI_MODE_REPORT_ID, &feature_report)) {
+ hid_dbg(hdev, "device does not have set mode feature report\n");
+ goto start;
+ }
+
+ if (!rmi_check_valid_report_id(hdev, HID_INPUT_REPORT,
+ RMI_ATTN_REPORT_ID, &input_report)) {
+ hid_dbg(hdev, "device does not have attention input report\n");
+ goto start;
+ }
+
+ data->input_report_size = hid_report_len(input_report);
+
+ if (!rmi_check_valid_report_id(hdev, HID_OUTPUT_REPORT,
+ RMI_WRITE_REPORT_ID, &output_report)) {
+ hid_dbg(hdev,
+ "device does not have rmi write output report\n");
+ goto start;
+ }
+
+ data->output_report_size = hid_report_len(output_report);
+
+ data->device_flags |= RMI_DEVICE;
+ alloc_size = data->output_report_size + data->input_report_size;
+
+ data->writeReport = devm_kzalloc(&hdev->dev, alloc_size, GFP_KERNEL);
+ if (!data->writeReport) {
+ ret = -ENOMEM;
+ return ret;
+ }
+
+ data->readReport = data->writeReport + data->output_report_size;
+
+ init_waitqueue_head(&data->wait);
+
+ mutex_init(&data->page_mutex);
+
+start:
+ ret = hid_hw_start(hdev, HID_CONNECT_DEFAULT);
+ if (ret) {
+ hid_err(hdev, "hw start failed\n");
+ return ret;
+ }
+
+ if ((data->device_flags & RMI_DEVICE) &&
+ !test_bit(RMI_STARTED, &data->flags))
+ /*
+ * The device maybe in the bootloader if rmi_input_configured
+ * failed to find F11 in the PDT. Print an error, but don't
+ * return an error from rmi_probe so that hidraw will be
+ * accessible from userspace. That way a userspace tool
+ * can be used to reload working firmware on the touchpad.
+ */
+ hid_err(hdev, "Device failed to be properly configured\n");
+
+ return 0;
+}
+
+static void rmi_remove(struct hid_device *hdev)
+{
+ struct rmi_data *hdata = hid_get_drvdata(hdev);
+
+ clear_bit(RMI_STARTED, &hdata->flags);
+
+ hid_hw_stop(hdev);
+}
+
+static const struct hid_device_id rmi_id[] = {
+ { HID_USB_DEVICE(USB_VENDOR_ID_RAZER, USB_DEVICE_ID_RAZER_BLADE_14),
+ .driver_data = RMI_DEVICE_HAS_PHYS_BUTTONS },
+ { HID_DEVICE(HID_BUS_ANY, HID_GROUP_RMI, HID_ANY_ID, HID_ANY_ID) },
+ { }
+};
+MODULE_DEVICE_TABLE(hid, rmi_id);
+
+static struct hid_driver rmi_driver = {
+ .name = "hid-rmi",
+ .id_table = rmi_id,
+ .probe = rmi_probe,
+ .remove = rmi_remove,
+ .event = rmi_event,
+ .raw_event = rmi_raw_event,
+ .input_mapping = rmi_input_mapping,
+ .input_configured = rmi_input_configured,
+#ifdef CONFIG_PM
+ .resume = rmi_post_resume,
+ .reset_resume = rmi_post_reset,
+#endif
+};
+
+module_hid_driver(rmi_driver);
+
+MODULE_AUTHOR("Andrew Duggan <aduggan@synaptics.com>");
+MODULE_DESCRIPTION("RMI HID driver");
+MODULE_LICENSE("GPL");