summaryrefslogtreecommitdiff
path: root/drivers/hsi/controllers/omap_ssi.h
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/hsi/controllers/omap_ssi.h')
-rw-r--r--drivers/hsi/controllers/omap_ssi.h166
1 files changed, 166 insertions, 0 deletions
diff --git a/drivers/hsi/controllers/omap_ssi.h b/drivers/hsi/controllers/omap_ssi.h
new file mode 100644
index 000000000..9d056417d
--- /dev/null
+++ b/drivers/hsi/controllers/omap_ssi.h
@@ -0,0 +1,166 @@
+/* OMAP SSI internal interface.
+ *
+ * Copyright (C) 2010 Nokia Corporation. All rights reserved.
+ * Copyright (C) 2013 Sebastian Reichel
+ *
+ * Contact: Carlos Chinea <carlos.chinea@nokia.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
+ * 02110-1301 USA
+ */
+
+#ifndef __LINUX_HSI_OMAP_SSI_H__
+#define __LINUX_HSI_OMAP_SSI_H__
+
+#include <linux/device.h>
+#include <linux/platform_device.h>
+#include <linux/hsi/hsi.h>
+#include <linux/gpio.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+
+#define SSI_MAX_CHANNELS 8
+#define SSI_MAX_GDD_LCH 8
+#define SSI_BYTES_TO_FRAMES(x) ((((x) - 1) >> 2) + 1)
+
+/**
+ * struct omap_ssm_ctx - OMAP synchronous serial module (TX/RX) context
+ * @mode: Bit transmission mode
+ * @channels: Number of channels
+ * @framesize: Frame size in bits
+ * @timeout: RX frame timeout
+ * @divisor: TX divider
+ * @arb_mode: Arbitration mode for TX frame (Round robin, priority)
+ */
+struct omap_ssm_ctx {
+ u32 mode;
+ u32 channels;
+ u32 frame_size;
+ union {
+ u32 timeout; /* Rx Only */
+ struct {
+ u32 arb_mode;
+ u32 divisor;
+ }; /* Tx only */
+ };
+};
+
+/**
+ * struct omap_ssi_port - OMAP SSI port data
+ * @dev: device associated to the port (HSI port)
+ * @pdev: platform device associated to the port
+ * @sst_dma: SSI transmitter physical base address
+ * @ssr_dma: SSI receiver physical base address
+ * @sst_base: SSI transmitter base address
+ * @ssr_base: SSI receiver base address
+ * @wk_lock: spin lock to serialize access to the wake lines
+ * @lock: Spin lock to serialize access to the SSI port
+ * @channels: Current number of channels configured (1,2,4 or 8)
+ * @txqueue: TX message queues
+ * @rxqueue: RX message queues
+ * @brkqueue: Queue of incoming HWBREAK requests (FRAME mode)
+ * @irq: IRQ number
+ * @wake_irq: IRQ number for incoming wake line (-1 if none)
+ * @wake_gpio: GPIO number for incoming wake line (-1 if none)
+ * @pio_tasklet: Bottom half for PIO transfers and events
+ * @wake_tasklet: Bottom half for incoming wake events
+ * @wkin_cken: Keep track of clock references due to the incoming wake line
+ * @wk_refcount: Reference count for output wake line
+ * @sys_mpu_enable: Context for the interrupt enable register for irq 0
+ * @sst: Context for the synchronous serial transmitter
+ * @ssr: Context for the synchronous serial receiver
+ */
+struct omap_ssi_port {
+ struct device *dev;
+ struct device *pdev;
+ dma_addr_t sst_dma;
+ dma_addr_t ssr_dma;
+ void __iomem *sst_base;
+ void __iomem *ssr_base;
+ spinlock_t wk_lock;
+ spinlock_t lock;
+ unsigned int channels;
+ struct list_head txqueue[SSI_MAX_CHANNELS];
+ struct list_head rxqueue[SSI_MAX_CHANNELS];
+ struct list_head brkqueue;
+ unsigned int irq;
+ int wake_irq;
+ int wake_gpio;
+ struct tasklet_struct pio_tasklet;
+ struct tasklet_struct wake_tasklet;
+ bool wktest:1; /* FIXME: HACK to be removed */
+ bool wkin_cken:1; /* Workaround */
+ unsigned int wk_refcount;
+ /* OMAP SSI port context */
+ u32 sys_mpu_enable; /* We use only one irq */
+ struct omap_ssm_ctx sst;
+ struct omap_ssm_ctx ssr;
+ u32 loss_count;
+ u32 port_id;
+#ifdef CONFIG_DEBUG_FS
+ struct dentry *dir;
+#endif
+};
+
+/**
+ * struct gdd_trn - GDD transaction data
+ * @msg: Pointer to the HSI message being served
+ * @sg: Pointer to the current sg entry being served
+ */
+struct gdd_trn {
+ struct hsi_msg *msg;
+ struct scatterlist *sg;
+};
+
+/**
+ * struct omap_ssi_controller - OMAP SSI controller data
+ * @dev: device associated to the controller (HSI controller)
+ * @sys: SSI I/O base address
+ * @gdd: GDD I/O base address
+ * @fck: SSI functional clock
+ * @gdd_irq: IRQ line for GDD
+ * @gdd_tasklet: bottom half for DMA transfers
+ * @gdd_trn: Array of GDD transaction data for ongoing GDD transfers
+ * @lock: lock to serialize access to GDD
+ * @loss_count: To follow if we need to restore context or not
+ * @max_speed: Maximum TX speed (Kb/s) set by the clients.
+ * @sysconfig: SSI controller saved context
+ * @gdd_gcr: SSI GDD saved context
+ * @get_loss: Pointer to omap_pm_get_dev_context_loss_count, if any
+ * @port: Array of pointers of the ports of the controller
+ * @dir: Debugfs SSI root directory
+ */
+struct omap_ssi_controller {
+ struct device *dev;
+ void __iomem *sys;
+ void __iomem *gdd;
+ struct clk *fck;
+ unsigned int gdd_irq;
+ struct tasklet_struct gdd_tasklet;
+ struct gdd_trn gdd_trn[SSI_MAX_GDD_LCH];
+ spinlock_t lock;
+ unsigned long fck_rate;
+ u32 loss_count;
+ u32 max_speed;
+ /* OMAP SSI Controller context */
+ u32 sysconfig;
+ u32 gdd_gcr;
+ int (*get_loss)(struct device *dev);
+ struct omap_ssi_port **port;
+#ifdef CONFIG_DEBUG_FS
+ struct dentry *dir;
+#endif
+};
+
+#endif /* __LINUX_HSI_OMAP_SSI_H__ */