diff options
Diffstat (limited to 'drivers/hwmon/hwmon-vid.c')
| -rw-r--r-- | drivers/hwmon/hwmon-vid.c | 317 |
1 files changed, 317 insertions, 0 deletions
diff --git a/drivers/hwmon/hwmon-vid.c b/drivers/hwmon/hwmon-vid.c new file mode 100644 index 000000000..ef91b8a67 --- /dev/null +++ b/drivers/hwmon/hwmon-vid.c @@ -0,0 +1,317 @@ +/* + * hwmon-vid.c - VID/VRM/VRD voltage conversions + * + * Copyright (c) 2004 Rudolf Marek <r.marek@assembler.cz> + * + * Partly imported from i2c-vid.h of the lm_sensors project + * Copyright (c) 2002 Mark D. Studebaker <mdsxyz123@yahoo.com> + * With assistance from Trent Piepho <xyzzy@speakeasy.org> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + +#include <linux/module.h> +#include <linux/kernel.h> +#include <linux/hwmon-vid.h> + +/* + * Common code for decoding VID pins. + * + * References: + * + * For VRM 8.4 to 9.1, "VRM x.y DC-DC Converter Design Guidelines", + * available at http://developer.intel.com/. + * + * For VRD 10.0 and up, "VRD x.y Design Guide", + * available at http://developer.intel.com/. + * + * AMD Athlon 64 and AMD Opteron Processors, AMD Publication 26094, + * http://support.amd.com/us/Processor_TechDocs/26094.PDF + * Table 74. VID Code Voltages + * This corresponds to an arbitrary VRM code of 24 in the functions below. + * These CPU models (K8 revision <= E) have 5 VID pins. See also: + * Revision Guide for AMD Athlon 64 and AMD Opteron Processors, AMD Publication 25759, + * http://www.amd.com/us-en/assets/content_type/white_papers_and_tech_docs/25759.pdf + * + * AMD NPT Family 0Fh Processors, AMD Publication 32559, + * http://www.amd.com/us-en/assets/content_type/white_papers_and_tech_docs/32559.pdf + * Table 71. VID Code Voltages + * This corresponds to an arbitrary VRM code of 25 in the functions below. + * These CPU models (K8 revision >= F) have 6 VID pins. See also: + * Revision Guide for AMD NPT Family 0Fh Processors, AMD Publication 33610, + * http://www.amd.com/us-en/assets/content_type/white_papers_and_tech_docs/33610.pdf + * + * The 17 specification is in fact Intel Mobile Voltage Positioning - + * (IMVP-II). You can find more information in the datasheet of Max1718 + * http://www.maxim-ic.com/quick_view2.cfm/qv_pk/2452 + * + * The 13 specification corresponds to the Intel Pentium M series. There + * doesn't seem to be any named specification for these. The conversion + * tables are detailed directly in the various Pentium M datasheets: + * http://www.intel.com/design/intarch/pentiumm/docs_pentiumm.htm + * + * The 14 specification corresponds to Intel Core series. There + * doesn't seem to be any named specification for these. The conversion + * tables are detailed directly in the various Pentium Core datasheets: + * http://www.intel.com/design/mobile/datashts/309221.htm + * + * The 110 (VRM 11) specification corresponds to Intel Conroe based series. + * http://www.intel.com/design/processor/applnots/313214.htm + */ + +/* + * vrm is the VRM/VRD document version multiplied by 10. + * val is the 4-bit or more VID code. + * Returned value is in mV to avoid floating point in the kernel. + * Some VID have some bits in uV scale, this is rounded to mV. + */ +int vid_from_reg(int val, u8 vrm) +{ + int vid; + + switch (vrm) { + + case 100: /* VRD 10.0 */ + /* compute in uV, round to mV */ + val &= 0x3f; + if ((val & 0x1f) == 0x1f) + return 0; + if ((val & 0x1f) <= 0x09 || val == 0x0a) + vid = 1087500 - (val & 0x1f) * 25000; + else + vid = 1862500 - (val & 0x1f) * 25000; + if (val & 0x20) + vid -= 12500; + return (vid + 500) / 1000; + + case 110: /* Intel Conroe */ + /* compute in uV, round to mV */ + val &= 0xff; + if (val < 0x02 || val > 0xb2) + return 0; + return (1600000 - (val - 2) * 6250 + 500) / 1000; + + case 24: /* Athlon64 & Opteron */ + val &= 0x1f; + if (val == 0x1f) + return 0; + /* fall through */ + case 25: /* AMD NPT 0Fh */ + val &= 0x3f; + return (val < 32) ? 1550 - 25 * val + : 775 - (25 * (val - 31)) / 2; + + case 26: /* AMD family 10h to 15h, serial VID */ + val &= 0x7f; + if (val >= 0x7c) + return 0; + return DIV_ROUND_CLOSEST(15500 - 125 * val, 10); + + case 91: /* VRM 9.1 */ + case 90: /* VRM 9.0 */ + val &= 0x1f; + return val == 0x1f ? 0 : + 1850 - val * 25; + + case 85: /* VRM 8.5 */ + val &= 0x1f; + return (val & 0x10 ? 25 : 0) + + ((val & 0x0f) > 0x04 ? 2050 : 1250) - + ((val & 0x0f) * 50); + + case 84: /* VRM 8.4 */ + val &= 0x0f; + /* fall through */ + case 82: /* VRM 8.2 */ + val &= 0x1f; + return val == 0x1f ? 0 : + val & 0x10 ? 5100 - (val) * 100 : + 2050 - (val) * 50; + case 17: /* Intel IMVP-II */ + val &= 0x1f; + return val & 0x10 ? 975 - (val & 0xF) * 25 : + 1750 - val * 50; + case 13: + case 131: + val &= 0x3f; + /* Exception for Eden ULV 500 MHz */ + if (vrm == 131 && val == 0x3f) + val++; + return 1708 - val * 16; + case 14: /* Intel Core */ + /* compute in uV, round to mV */ + val &= 0x7f; + return val > 0x77 ? 0 : (1500000 - (val * 12500) + 500) / 1000; + default: /* report 0 for unknown */ + if (vrm) + pr_warn("Requested unsupported VRM version (%u)\n", + (unsigned int)vrm); + return 0; + } +} +EXPORT_SYMBOL(vid_from_reg); + +/* + * After this point is the code to automatically determine which + * VRM/VRD specification should be used depending on the CPU. + */ + +struct vrm_model { + u8 vendor; + u8 family; + u8 model_from; + u8 model_to; + u8 stepping_to; + u8 vrm_type; +}; + +#define ANY 0xFF + +#ifdef CONFIG_X86 + +/* + * The stepping_to parameter is highest acceptable stepping for current line. + * The model match must be exact for 4-bit values. For model values 0x10 + * and above (extended model), all models below the parameter will match. + */ + +static struct vrm_model vrm_models[] = { + {X86_VENDOR_AMD, 0x6, 0x0, ANY, ANY, 90}, /* Athlon Duron etc */ + {X86_VENDOR_AMD, 0xF, 0x0, 0x3F, ANY, 24}, /* Athlon 64, Opteron */ + /* + * In theory, all NPT family 0Fh processors have 6 VID pins and should + * thus use vrm 25, however in practice not all mainboards route the + * 6th VID pin because it is never needed. So we use the 5 VID pin + * variant (vrm 24) for the models which exist today. + */ + {X86_VENDOR_AMD, 0xF, 0x40, 0x7F, ANY, 24}, /* NPT family 0Fh */ + {X86_VENDOR_AMD, 0xF, 0x80, ANY, ANY, 25}, /* future fam. 0Fh */ + {X86_VENDOR_AMD, 0x10, 0x0, ANY, ANY, 25}, /* NPT family 10h */ + {X86_VENDOR_AMD, 0x11, 0x0, ANY, ANY, 26}, /* family 11h */ + {X86_VENDOR_AMD, 0x12, 0x0, ANY, ANY, 26}, /* family 12h */ + {X86_VENDOR_AMD, 0x14, 0x0, ANY, ANY, 26}, /* family 14h */ + {X86_VENDOR_AMD, 0x15, 0x0, ANY, ANY, 26}, /* family 15h */ + + {X86_VENDOR_INTEL, 0x6, 0x0, 0x6, ANY, 82}, /* Pentium Pro, + * Pentium II, Xeon, + * Mobile Pentium, + * Celeron */ + {X86_VENDOR_INTEL, 0x6, 0x7, 0x7, ANY, 84}, /* Pentium III, Xeon */ + {X86_VENDOR_INTEL, 0x6, 0x8, 0x8, ANY, 82}, /* Pentium III, Xeon */ + {X86_VENDOR_INTEL, 0x6, 0x9, 0x9, ANY, 13}, /* Pentium M (130 nm) */ + {X86_VENDOR_INTEL, 0x6, 0xA, 0xA, ANY, 82}, /* Pentium III Xeon */ + {X86_VENDOR_INTEL, 0x6, 0xB, 0xB, ANY, 85}, /* Tualatin */ + {X86_VENDOR_INTEL, 0x6, 0xD, 0xD, ANY, 13}, /* Pentium M (90 nm) */ + {X86_VENDOR_INTEL, 0x6, 0xE, 0xE, ANY, 14}, /* Intel Core (65 nm) */ + {X86_VENDOR_INTEL, 0x6, 0xF, ANY, ANY, 110}, /* Intel Conroe and + * later */ + {X86_VENDOR_INTEL, 0xF, 0x0, 0x0, ANY, 90}, /* P4 */ + {X86_VENDOR_INTEL, 0xF, 0x1, 0x1, ANY, 90}, /* P4 Willamette */ + {X86_VENDOR_INTEL, 0xF, 0x2, 0x2, ANY, 90}, /* P4 Northwood */ + {X86_VENDOR_INTEL, 0xF, 0x3, ANY, ANY, 100}, /* Prescott and above + * assume VRD 10 */ + + {X86_VENDOR_CENTAUR, 0x6, 0x7, 0x7, ANY, 85}, /* Eden ESP/Ezra */ + {X86_VENDOR_CENTAUR, 0x6, 0x8, 0x8, 0x7, 85}, /* Ezra T */ + {X86_VENDOR_CENTAUR, 0x6, 0x9, 0x9, 0x7, 85}, /* Nehemiah */ + {X86_VENDOR_CENTAUR, 0x6, 0x9, 0x9, ANY, 17}, /* C3-M, Eden-N */ + {X86_VENDOR_CENTAUR, 0x6, 0xA, 0xA, 0x7, 0}, /* No information */ + {X86_VENDOR_CENTAUR, 0x6, 0xA, 0xA, ANY, 13}, /* C7-M, C7, + * Eden (Esther) */ + {X86_VENDOR_CENTAUR, 0x6, 0xD, 0xD, ANY, 134}, /* C7-D, C7-M, C7, + * Eden (Esther) */ +}; + +/* + * Special case for VIA model D: there are two different possible + * VID tables, so we have to figure out first, which one must be + * used. This resolves temporary drm value 134 to 14 (Intel Core + * 7-bit VID), 13 (Pentium M 6-bit VID) or 131 (Pentium M 6-bit VID + * + quirk for Eden ULV 500 MHz). + * Note: something similar might be needed for model A, I'm not sure. + */ +static u8 get_via_model_d_vrm(void) +{ + unsigned int vid, brand, __maybe_unused dummy; + static const char *brands[4] = { + "C7-M", "C7", "Eden", "C7-D" + }; + + rdmsr(0x198, dummy, vid); + vid &= 0xff; + + rdmsr(0x1154, brand, dummy); + brand = ((brand >> 4) ^ (brand >> 2)) & 0x03; + + if (vid > 0x3f) { + pr_info("Using %d-bit VID table for VIA %s CPU\n", + 7, brands[brand]); + return 14; + } else { + pr_info("Using %d-bit VID table for VIA %s CPU\n", + 6, brands[brand]); + /* Enable quirk for Eden */ + return brand == 2 ? 131 : 13; + } +} + +static u8 find_vrm(u8 family, u8 model, u8 stepping, u8 vendor) +{ + int i; + + for (i = 0; i < ARRAY_SIZE(vrm_models); i++) { + if (vendor == vrm_models[i].vendor && + family == vrm_models[i].family && + model >= vrm_models[i].model_from && + model <= vrm_models[i].model_to && + stepping <= vrm_models[i].stepping_to) + return vrm_models[i].vrm_type; + } + + return 0; +} + +u8 vid_which_vrm(void) +{ + struct cpuinfo_x86 *c = &cpu_data(0); + u8 vrm_ret; + + if (c->x86 < 6) /* Any CPU with family lower than 6 */ + return 0; /* doesn't have VID */ + + vrm_ret = find_vrm(c->x86, c->x86_model, c->x86_mask, c->x86_vendor); + if (vrm_ret == 134) + vrm_ret = get_via_model_d_vrm(); + if (vrm_ret == 0) + pr_info("Unknown VRM version of your x86 CPU\n"); + return vrm_ret; +} + +/* and now for something completely different for the non-x86 world */ +#else +u8 vid_which_vrm(void) +{ + pr_info("Unknown VRM version of your CPU\n"); + return 0; +} +#endif +EXPORT_SYMBOL(vid_which_vrm); + +MODULE_AUTHOR("Rudolf Marek <r.marek@assembler.cz>"); + +MODULE_DESCRIPTION("hwmon-vid driver"); +MODULE_LICENSE("GPL"); |