diff options
Diffstat (limited to 'drivers/hwmon/lm63.c')
| -rw-r--r-- | drivers/hwmon/lm63.c | 1169 |
1 files changed, 1169 insertions, 0 deletions
diff --git a/drivers/hwmon/lm63.c b/drivers/hwmon/lm63.c new file mode 100644 index 000000000..33bfdb444 --- /dev/null +++ b/drivers/hwmon/lm63.c @@ -0,0 +1,1169 @@ +/* + * lm63.c - driver for the National Semiconductor LM63 temperature sensor + * with integrated fan control + * Copyright (C) 2004-2008 Jean Delvare <jdelvare@suse.de> + * Based on the lm90 driver. + * + * The LM63 is a sensor chip made by National Semiconductor. It measures + * two temperatures (its own and one external one) and the speed of one + * fan, those speed it can additionally control. Complete datasheet can be + * obtained from National's website at: + * http://www.national.com/pf/LM/LM63.html + * + * The LM63 is basically an LM86 with fan speed monitoring and control + * capabilities added. It misses some of the LM86 features though: + * - No low limit for local temperature. + * - No critical limit for local temperature. + * - Critical limit for remote temperature can be changed only once. We + * will consider that the critical limit is read-only. + * + * The datasheet isn't very clear about what the tachometer reading is. + * I had a explanation from National Semiconductor though. The two lower + * bits of the read value have to be masked out. The value is still 16 bit + * in width. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#include <linux/module.h> +#include <linux/init.h> +#include <linux/slab.h> +#include <linux/jiffies.h> +#include <linux/i2c.h> +#include <linux/hwmon-sysfs.h> +#include <linux/hwmon.h> +#include <linux/err.h> +#include <linux/mutex.h> +#include <linux/sysfs.h> +#include <linux/types.h> + +/* + * Addresses to scan + * Address is fully defined internally and cannot be changed except for + * LM64 which has one pin dedicated to address selection. + * LM63 and LM96163 have address 0x4c. + * LM64 can have address 0x18 or 0x4e. + */ + +static const unsigned short normal_i2c[] = { 0x18, 0x4c, 0x4e, I2C_CLIENT_END }; + +/* + * The LM63 registers + */ + +#define LM63_REG_CONFIG1 0x03 +#define LM63_REG_CONVRATE 0x04 +#define LM63_REG_CONFIG2 0xBF +#define LM63_REG_CONFIG_FAN 0x4A + +#define LM63_REG_TACH_COUNT_MSB 0x47 +#define LM63_REG_TACH_COUNT_LSB 0x46 +#define LM63_REG_TACH_LIMIT_MSB 0x49 +#define LM63_REG_TACH_LIMIT_LSB 0x48 + +#define LM63_REG_PWM_VALUE 0x4C +#define LM63_REG_PWM_FREQ 0x4D +#define LM63_REG_LUT_TEMP_HYST 0x4F +#define LM63_REG_LUT_TEMP(nr) (0x50 + 2 * (nr)) +#define LM63_REG_LUT_PWM(nr) (0x51 + 2 * (nr)) + +#define LM63_REG_LOCAL_TEMP 0x00 +#define LM63_REG_LOCAL_HIGH 0x05 + +#define LM63_REG_REMOTE_TEMP_MSB 0x01 +#define LM63_REG_REMOTE_TEMP_LSB 0x10 +#define LM63_REG_REMOTE_OFFSET_MSB 0x11 +#define LM63_REG_REMOTE_OFFSET_LSB 0x12 +#define LM63_REG_REMOTE_HIGH_MSB 0x07 +#define LM63_REG_REMOTE_HIGH_LSB 0x13 +#define LM63_REG_REMOTE_LOW_MSB 0x08 +#define LM63_REG_REMOTE_LOW_LSB 0x14 +#define LM63_REG_REMOTE_TCRIT 0x19 +#define LM63_REG_REMOTE_TCRIT_HYST 0x21 + +#define LM63_REG_ALERT_STATUS 0x02 +#define LM63_REG_ALERT_MASK 0x16 + +#define LM63_REG_MAN_ID 0xFE +#define LM63_REG_CHIP_ID 0xFF + +#define LM96163_REG_TRUTHERM 0x30 +#define LM96163_REG_REMOTE_TEMP_U_MSB 0x31 +#define LM96163_REG_REMOTE_TEMP_U_LSB 0x32 +#define LM96163_REG_CONFIG_ENHANCED 0x45 + +#define LM63_MAX_CONVRATE 9 + +#define LM63_MAX_CONVRATE_HZ 32 +#define LM96163_MAX_CONVRATE_HZ 26 + +/* + * Conversions and various macros + * For tachometer counts, the LM63 uses 16-bit values. + * For local temperature and high limit, remote critical limit and hysteresis + * value, it uses signed 8-bit values with LSB = 1 degree Celsius. + * For remote temperature, low and high limits, it uses signed 11-bit values + * with LSB = 0.125 degree Celsius, left-justified in 16-bit registers. + * For LM64 the actual remote diode temperature is 16 degree Celsius higher + * than the register reading. Remote temperature setpoints have to be + * adapted accordingly. + */ + +#define FAN_FROM_REG(reg) ((reg) == 0xFFFC || (reg) == 0 ? 0 : \ + 5400000 / (reg)) +#define FAN_TO_REG(val) ((val) <= 82 ? 0xFFFC : \ + (5400000 / (val)) & 0xFFFC) +#define TEMP8_FROM_REG(reg) ((reg) * 1000) +#define TEMP8_TO_REG(val) DIV_ROUND_CLOSEST(clamp_val((val), -128000, \ + 127000), 1000) +#define TEMP8U_TO_REG(val) DIV_ROUND_CLOSEST(clamp_val((val), 0, \ + 255000), 1000) +#define TEMP11_FROM_REG(reg) ((reg) / 32 * 125) +#define TEMP11_TO_REG(val) (DIV_ROUND_CLOSEST(clamp_val((val), -128000, \ + 127875), 125) * 32) +#define TEMP11U_TO_REG(val) (DIV_ROUND_CLOSEST(clamp_val((val), 0, \ + 255875), 125) * 32) +#define HYST_TO_REG(val) DIV_ROUND_CLOSEST(clamp_val((val), 0, 127000), \ + 1000) + +#define UPDATE_INTERVAL(max, rate) \ + ((1000 << (LM63_MAX_CONVRATE - (rate))) / (max)) + +enum chips { lm63, lm64, lm96163 }; + +/* + * Client data (each client gets its own) + */ + +struct lm63_data { + struct i2c_client *client; + struct mutex update_lock; + const struct attribute_group *groups[5]; + char valid; /* zero until following fields are valid */ + char lut_valid; /* zero until lut fields are valid */ + unsigned long last_updated; /* in jiffies */ + unsigned long lut_last_updated; /* in jiffies */ + enum chips kind; + int temp2_offset; + + int update_interval; /* in milliseconds */ + int max_convrate_hz; + int lut_size; /* 8 or 12 */ + + /* registers values */ + u8 config, config_fan; + u16 fan[2]; /* 0: input + 1: low limit */ + u8 pwm1_freq; + u8 pwm1[13]; /* 0: current output + 1-12: lookup table */ + s8 temp8[15]; /* 0: local input + 1: local high limit + 2: remote critical limit + 3-14: lookup table */ + s16 temp11[4]; /* 0: remote input + 1: remote low limit + 2: remote high limit + 3: remote offset */ + u16 temp11u; /* remote input (unsigned) */ + u8 temp2_crit_hyst; + u8 lut_temp_hyst; + u8 alarms; + bool pwm_highres; + bool lut_temp_highres; + bool remote_unsigned; /* true if unsigned remote upper limits */ + bool trutherm; +}; + +static inline int temp8_from_reg(struct lm63_data *data, int nr) +{ + if (data->remote_unsigned) + return TEMP8_FROM_REG((u8)data->temp8[nr]); + return TEMP8_FROM_REG(data->temp8[nr]); +} + +static inline int lut_temp_from_reg(struct lm63_data *data, int nr) +{ + return data->temp8[nr] * (data->lut_temp_highres ? 500 : 1000); +} + +static inline int lut_temp_to_reg(struct lm63_data *data, long val) +{ + val -= data->temp2_offset; + if (data->lut_temp_highres) + return DIV_ROUND_CLOSEST(clamp_val(val, 0, 127500), 500); + else + return DIV_ROUND_CLOSEST(clamp_val(val, 0, 127000), 1000); +} + +/* + * Update the lookup table register cache. + * client->update_lock must be held when calling this function. + */ +static void lm63_update_lut(struct lm63_data *data) +{ + struct i2c_client *client = data->client; + int i; + + if (time_after(jiffies, data->lut_last_updated + 5 * HZ) || + !data->lut_valid) { + for (i = 0; i < data->lut_size; i++) { + data->pwm1[1 + i] = i2c_smbus_read_byte_data(client, + LM63_REG_LUT_PWM(i)); + data->temp8[3 + i] = i2c_smbus_read_byte_data(client, + LM63_REG_LUT_TEMP(i)); + } + data->lut_temp_hyst = i2c_smbus_read_byte_data(client, + LM63_REG_LUT_TEMP_HYST); + + data->lut_last_updated = jiffies; + data->lut_valid = 1; + } +} + +static struct lm63_data *lm63_update_device(struct device *dev) +{ + struct lm63_data *data = dev_get_drvdata(dev); + struct i2c_client *client = data->client; + unsigned long next_update; + + mutex_lock(&data->update_lock); + + next_update = data->last_updated + + msecs_to_jiffies(data->update_interval); + if (time_after(jiffies, next_update) || !data->valid) { + if (data->config & 0x04) { /* tachometer enabled */ + /* order matters for fan1_input */ + data->fan[0] = i2c_smbus_read_byte_data(client, + LM63_REG_TACH_COUNT_LSB) & 0xFC; + data->fan[0] |= i2c_smbus_read_byte_data(client, + LM63_REG_TACH_COUNT_MSB) << 8; + data->fan[1] = (i2c_smbus_read_byte_data(client, + LM63_REG_TACH_LIMIT_LSB) & 0xFC) + | (i2c_smbus_read_byte_data(client, + LM63_REG_TACH_LIMIT_MSB) << 8); + } + + data->pwm1_freq = i2c_smbus_read_byte_data(client, + LM63_REG_PWM_FREQ); + if (data->pwm1_freq == 0) + data->pwm1_freq = 1; + data->pwm1[0] = i2c_smbus_read_byte_data(client, + LM63_REG_PWM_VALUE); + + data->temp8[0] = i2c_smbus_read_byte_data(client, + LM63_REG_LOCAL_TEMP); + data->temp8[1] = i2c_smbus_read_byte_data(client, + LM63_REG_LOCAL_HIGH); + + /* order matters for temp2_input */ + data->temp11[0] = i2c_smbus_read_byte_data(client, + LM63_REG_REMOTE_TEMP_MSB) << 8; + data->temp11[0] |= i2c_smbus_read_byte_data(client, + LM63_REG_REMOTE_TEMP_LSB); + data->temp11[1] = (i2c_smbus_read_byte_data(client, + LM63_REG_REMOTE_LOW_MSB) << 8) + | i2c_smbus_read_byte_data(client, + LM63_REG_REMOTE_LOW_LSB); + data->temp11[2] = (i2c_smbus_read_byte_data(client, + LM63_REG_REMOTE_HIGH_MSB) << 8) + | i2c_smbus_read_byte_data(client, + LM63_REG_REMOTE_HIGH_LSB); + data->temp11[3] = (i2c_smbus_read_byte_data(client, + LM63_REG_REMOTE_OFFSET_MSB) << 8) + | i2c_smbus_read_byte_data(client, + LM63_REG_REMOTE_OFFSET_LSB); + + if (data->kind == lm96163) + data->temp11u = (i2c_smbus_read_byte_data(client, + LM96163_REG_REMOTE_TEMP_U_MSB) << 8) + | i2c_smbus_read_byte_data(client, + LM96163_REG_REMOTE_TEMP_U_LSB); + + data->temp8[2] = i2c_smbus_read_byte_data(client, + LM63_REG_REMOTE_TCRIT); + data->temp2_crit_hyst = i2c_smbus_read_byte_data(client, + LM63_REG_REMOTE_TCRIT_HYST); + + data->alarms = i2c_smbus_read_byte_data(client, + LM63_REG_ALERT_STATUS) & 0x7F; + + data->last_updated = jiffies; + data->valid = 1; + } + + lm63_update_lut(data); + + mutex_unlock(&data->update_lock); + + return data; +} + +/* + * Trip points in the lookup table should be in ascending order for both + * temperatures and PWM output values. + */ +static int lm63_lut_looks_bad(struct device *dev, struct lm63_data *data) +{ + int i; + + mutex_lock(&data->update_lock); + lm63_update_lut(data); + + for (i = 1; i < data->lut_size; i++) { + if (data->pwm1[1 + i - 1] > data->pwm1[1 + i] + || data->temp8[3 + i - 1] > data->temp8[3 + i]) { + dev_warn(dev, + "Lookup table doesn't look sane (check entries %d and %d)\n", + i, i + 1); + break; + } + } + mutex_unlock(&data->update_lock); + + return i == data->lut_size ? 0 : 1; +} + +/* + * Sysfs callback functions and files + */ + +static ssize_t show_fan(struct device *dev, struct device_attribute *devattr, + char *buf) +{ + struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); + struct lm63_data *data = lm63_update_device(dev); + return sprintf(buf, "%d\n", FAN_FROM_REG(data->fan[attr->index])); +} + +static ssize_t set_fan(struct device *dev, struct device_attribute *dummy, + const char *buf, size_t count) +{ + struct lm63_data *data = dev_get_drvdata(dev); + struct i2c_client *client = data->client; + unsigned long val; + int err; + + err = kstrtoul(buf, 10, &val); + if (err) + return err; + + mutex_lock(&data->update_lock); + data->fan[1] = FAN_TO_REG(val); + i2c_smbus_write_byte_data(client, LM63_REG_TACH_LIMIT_LSB, + data->fan[1] & 0xFF); + i2c_smbus_write_byte_data(client, LM63_REG_TACH_LIMIT_MSB, + data->fan[1] >> 8); + mutex_unlock(&data->update_lock); + return count; +} + +static ssize_t show_pwm1(struct device *dev, struct device_attribute *devattr, + char *buf) +{ + struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); + struct lm63_data *data = lm63_update_device(dev); + int nr = attr->index; + int pwm; + + if (data->pwm_highres) + pwm = data->pwm1[nr]; + else + pwm = data->pwm1[nr] >= 2 * data->pwm1_freq ? + 255 : (data->pwm1[nr] * 255 + data->pwm1_freq) / + (2 * data->pwm1_freq); + + return sprintf(buf, "%d\n", pwm); +} + +static ssize_t set_pwm1(struct device *dev, struct device_attribute *devattr, + const char *buf, size_t count) +{ + struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); + struct lm63_data *data = dev_get_drvdata(dev); + struct i2c_client *client = data->client; + int nr = attr->index; + unsigned long val; + int err; + u8 reg; + + if (!(data->config_fan & 0x20)) /* register is read-only */ + return -EPERM; + + err = kstrtoul(buf, 10, &val); + if (err) + return err; + + reg = nr ? LM63_REG_LUT_PWM(nr - 1) : LM63_REG_PWM_VALUE; + val = clamp_val(val, 0, 255); + + mutex_lock(&data->update_lock); + data->pwm1[nr] = data->pwm_highres ? val : + (val * data->pwm1_freq * 2 + 127) / 255; + i2c_smbus_write_byte_data(client, reg, data->pwm1[nr]); + mutex_unlock(&data->update_lock); + return count; +} + +static ssize_t show_pwm1_enable(struct device *dev, + struct device_attribute *dummy, char *buf) +{ + struct lm63_data *data = lm63_update_device(dev); + return sprintf(buf, "%d\n", data->config_fan & 0x20 ? 1 : 2); +} + +static ssize_t set_pwm1_enable(struct device *dev, + struct device_attribute *dummy, + const char *buf, size_t count) +{ + struct lm63_data *data = dev_get_drvdata(dev); + struct i2c_client *client = data->client; + unsigned long val; + int err; + + err = kstrtoul(buf, 10, &val); + if (err) + return err; + if (val < 1 || val > 2) + return -EINVAL; + + /* + * Only let the user switch to automatic mode if the lookup table + * looks sane. + */ + if (val == 2 && lm63_lut_looks_bad(dev, data)) + return -EPERM; + + mutex_lock(&data->update_lock); + data->config_fan = i2c_smbus_read_byte_data(client, + LM63_REG_CONFIG_FAN); + if (val == 1) + data->config_fan |= 0x20; + else + data->config_fan &= ~0x20; + i2c_smbus_write_byte_data(client, LM63_REG_CONFIG_FAN, + data->config_fan); + mutex_unlock(&data->update_lock); + return count; +} + +/* + * There are 8bit registers for both local(temp1) and remote(temp2) sensor. + * For remote sensor registers temp2_offset has to be considered, + * for local sensor it must not. + * So we need separate 8bit accessors for local and remote sensor. + */ +static ssize_t show_local_temp8(struct device *dev, + struct device_attribute *devattr, + char *buf) +{ + struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); + struct lm63_data *data = lm63_update_device(dev); + return sprintf(buf, "%d\n", TEMP8_FROM_REG(data->temp8[attr->index])); +} + +static ssize_t show_remote_temp8(struct device *dev, + struct device_attribute *devattr, + char *buf) +{ + struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); + struct lm63_data *data = lm63_update_device(dev); + return sprintf(buf, "%d\n", temp8_from_reg(data, attr->index) + + data->temp2_offset); +} + +static ssize_t show_lut_temp(struct device *dev, + struct device_attribute *devattr, + char *buf) +{ + struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); + struct lm63_data *data = lm63_update_device(dev); + return sprintf(buf, "%d\n", lut_temp_from_reg(data, attr->index) + + data->temp2_offset); +} + +static ssize_t set_temp8(struct device *dev, struct device_attribute *devattr, + const char *buf, size_t count) +{ + struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); + struct lm63_data *data = dev_get_drvdata(dev); + struct i2c_client *client = data->client; + int nr = attr->index; + long val; + int err; + int temp; + u8 reg; + + err = kstrtol(buf, 10, &val); + if (err) + return err; + + mutex_lock(&data->update_lock); + switch (nr) { + case 2: + reg = LM63_REG_REMOTE_TCRIT; + if (data->remote_unsigned) + temp = TEMP8U_TO_REG(val - data->temp2_offset); + else + temp = TEMP8_TO_REG(val - data->temp2_offset); + break; + case 1: + reg = LM63_REG_LOCAL_HIGH; + temp = TEMP8_TO_REG(val); + break; + default: /* lookup table */ + reg = LM63_REG_LUT_TEMP(nr - 3); + temp = lut_temp_to_reg(data, val); + } + data->temp8[nr] = temp; + i2c_smbus_write_byte_data(client, reg, temp); + mutex_unlock(&data->update_lock); + return count; +} + +static ssize_t show_temp11(struct device *dev, struct device_attribute *devattr, + char *buf) +{ + struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); + struct lm63_data *data = lm63_update_device(dev); + int nr = attr->index; + int temp; + + if (!nr) { + /* + * Use unsigned temperature unless its value is zero. + * If it is zero, use signed temperature. + */ + if (data->temp11u) + temp = TEMP11_FROM_REG(data->temp11u); + else + temp = TEMP11_FROM_REG(data->temp11[nr]); + } else { + if (data->remote_unsigned && nr == 2) + temp = TEMP11_FROM_REG((u16)data->temp11[nr]); + else + temp = TEMP11_FROM_REG(data->temp11[nr]); + } + return sprintf(buf, "%d\n", temp + data->temp2_offset); +} + +static ssize_t set_temp11(struct device *dev, struct device_attribute *devattr, + const char *buf, size_t count) +{ + static const u8 reg[6] = { + LM63_REG_REMOTE_LOW_MSB, + LM63_REG_REMOTE_LOW_LSB, + LM63_REG_REMOTE_HIGH_MSB, + LM63_REG_REMOTE_HIGH_LSB, + LM63_REG_REMOTE_OFFSET_MSB, + LM63_REG_REMOTE_OFFSET_LSB, + }; + + struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); + struct lm63_data *data = dev_get_drvdata(dev); + struct i2c_client *client = data->client; + long val; + int err; + int nr = attr->index; + + err = kstrtol(buf, 10, &val); + if (err) + return err; + + mutex_lock(&data->update_lock); + if (data->remote_unsigned && nr == 2) + data->temp11[nr] = TEMP11U_TO_REG(val - data->temp2_offset); + else + data->temp11[nr] = TEMP11_TO_REG(val - data->temp2_offset); + + i2c_smbus_write_byte_data(client, reg[(nr - 1) * 2], + data->temp11[nr] >> 8); + i2c_smbus_write_byte_data(client, reg[(nr - 1) * 2 + 1], + data->temp11[nr] & 0xff); + mutex_unlock(&data->update_lock); + return count; +} + +/* + * Hysteresis register holds a relative value, while we want to present + * an absolute to user-space + */ +static ssize_t show_temp2_crit_hyst(struct device *dev, + struct device_attribute *dummy, char *buf) +{ + struct lm63_data *data = lm63_update_device(dev); + return sprintf(buf, "%d\n", temp8_from_reg(data, 2) + + data->temp2_offset + - TEMP8_FROM_REG(data->temp2_crit_hyst)); +} + +static ssize_t show_lut_temp_hyst(struct device *dev, + struct device_attribute *devattr, char *buf) +{ + struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); + struct lm63_data *data = lm63_update_device(dev); + + return sprintf(buf, "%d\n", lut_temp_from_reg(data, attr->index) + + data->temp2_offset + - TEMP8_FROM_REG(data->lut_temp_hyst)); +} + +/* + * And now the other way around, user-space provides an absolute + * hysteresis value and we have to store a relative one + */ +static ssize_t set_temp2_crit_hyst(struct device *dev, + struct device_attribute *dummy, + const char *buf, size_t count) +{ + struct lm63_data *data = dev_get_drvdata(dev); + struct i2c_client *client = data->client; + long val; + int err; + long hyst; + + err = kstrtol(buf, 10, &val); + if (err) + return err; + + mutex_lock(&data->update_lock); + hyst = temp8_from_reg(data, 2) + data->temp2_offset - val; + i2c_smbus_write_byte_data(client, LM63_REG_REMOTE_TCRIT_HYST, + HYST_TO_REG(hyst)); + mutex_unlock(&data->update_lock); + return count; +} + +/* + * Set conversion rate. + * client->update_lock must be held when calling this function. + */ +static void lm63_set_convrate(struct lm63_data *data, unsigned int interval) +{ + struct i2c_client *client = data->client; + unsigned int update_interval; + int i; + + /* Shift calculations to avoid rounding errors */ + interval <<= 6; + + /* find the nearest update rate */ + update_interval = (1 << (LM63_MAX_CONVRATE + 6)) * 1000 + / data->max_convrate_hz; + for (i = 0; i < LM63_MAX_CONVRATE; i++, update_interval >>= 1) + if (interval >= update_interval * 3 / 4) + break; + + i2c_smbus_write_byte_data(client, LM63_REG_CONVRATE, i); + data->update_interval = UPDATE_INTERVAL(data->max_convrate_hz, i); +} + +static ssize_t show_update_interval(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct lm63_data *data = dev_get_drvdata(dev); + + return sprintf(buf, "%u\n", data->update_interval); +} + +static ssize_t set_update_interval(struct device *dev, + struct device_attribute *attr, + const char *buf, size_t count) +{ + struct lm63_data *data = dev_get_drvdata(dev); + unsigned long val; + int err; + + err = kstrtoul(buf, 10, &val); + if (err) + return err; + + mutex_lock(&data->update_lock); + lm63_set_convrate(data, clamp_val(val, 0, 100000)); + mutex_unlock(&data->update_lock); + + return count; +} + +static ssize_t show_type(struct device *dev, struct device_attribute *attr, + char *buf) +{ + struct lm63_data *data = dev_get_drvdata(dev); + + return sprintf(buf, data->trutherm ? "1\n" : "2\n"); +} + +static ssize_t set_type(struct device *dev, struct device_attribute *attr, + const char *buf, size_t count) +{ + struct lm63_data *data = dev_get_drvdata(dev); + struct i2c_client *client = data->client; + unsigned long val; + int ret; + u8 reg; + + ret = kstrtoul(buf, 10, &val); + if (ret < 0) + return ret; + if (val != 1 && val != 2) + return -EINVAL; + + mutex_lock(&data->update_lock); + data->trutherm = val == 1; + reg = i2c_smbus_read_byte_data(client, LM96163_REG_TRUTHERM) & ~0x02; + i2c_smbus_write_byte_data(client, LM96163_REG_TRUTHERM, + reg | (data->trutherm ? 0x02 : 0x00)); + data->valid = 0; + mutex_unlock(&data->update_lock); + + return count; +} + +static ssize_t show_alarms(struct device *dev, struct device_attribute *dummy, + char *buf) +{ + struct lm63_data *data = lm63_update_device(dev); + return sprintf(buf, "%u\n", data->alarms); +} + +static ssize_t show_alarm(struct device *dev, struct device_attribute *devattr, + char *buf) +{ + struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); + struct lm63_data *data = lm63_update_device(dev); + int bitnr = attr->index; + + return sprintf(buf, "%u\n", (data->alarms >> bitnr) & 1); +} + +static SENSOR_DEVICE_ATTR(fan1_input, S_IRUGO, show_fan, NULL, 0); +static SENSOR_DEVICE_ATTR(fan1_min, S_IWUSR | S_IRUGO, show_fan, + set_fan, 1); + +static SENSOR_DEVICE_ATTR(pwm1, S_IWUSR | S_IRUGO, show_pwm1, set_pwm1, 0); +static DEVICE_ATTR(pwm1_enable, S_IWUSR | S_IRUGO, + show_pwm1_enable, set_pwm1_enable); +static SENSOR_DEVICE_ATTR(pwm1_auto_point1_pwm, S_IWUSR | S_IRUGO, + show_pwm1, set_pwm1, 1); +static SENSOR_DEVICE_ATTR(pwm1_auto_point1_temp, S_IWUSR | S_IRUGO, + show_lut_temp, set_temp8, 3); +static SENSOR_DEVICE_ATTR(pwm1_auto_point1_temp_hyst, S_IRUGO, + show_lut_temp_hyst, NULL, 3); +static SENSOR_DEVICE_ATTR(pwm1_auto_point2_pwm, S_IWUSR | S_IRUGO, + show_pwm1, set_pwm1, 2); +static SENSOR_DEVICE_ATTR(pwm1_auto_point2_temp, S_IWUSR | S_IRUGO, + show_lut_temp, set_temp8, 4); +static SENSOR_DEVICE_ATTR(pwm1_auto_point2_temp_hyst, S_IRUGO, + show_lut_temp_hyst, NULL, 4); +static SENSOR_DEVICE_ATTR(pwm1_auto_point3_pwm, S_IWUSR | S_IRUGO, + show_pwm1, set_pwm1, 3); +static SENSOR_DEVICE_ATTR(pwm1_auto_point3_temp, S_IWUSR | S_IRUGO, + show_lut_temp, set_temp8, 5); +static SENSOR_DEVICE_ATTR(pwm1_auto_point3_temp_hyst, S_IRUGO, + show_lut_temp_hyst, NULL, 5); +static SENSOR_DEVICE_ATTR(pwm1_auto_point4_pwm, S_IWUSR | S_IRUGO, + show_pwm1, set_pwm1, 4); +static SENSOR_DEVICE_ATTR(pwm1_auto_point4_temp, S_IWUSR | S_IRUGO, + show_lut_temp, set_temp8, 6); +static SENSOR_DEVICE_ATTR(pwm1_auto_point4_temp_hyst, S_IRUGO, + show_lut_temp_hyst, NULL, 6); +static SENSOR_DEVICE_ATTR(pwm1_auto_point5_pwm, S_IWUSR | S_IRUGO, + show_pwm1, set_pwm1, 5); +static SENSOR_DEVICE_ATTR(pwm1_auto_point5_temp, S_IWUSR | S_IRUGO, + show_lut_temp, set_temp8, 7); +static SENSOR_DEVICE_ATTR(pwm1_auto_point5_temp_hyst, S_IRUGO, + show_lut_temp_hyst, NULL, 7); +static SENSOR_DEVICE_ATTR(pwm1_auto_point6_pwm, S_IWUSR | S_IRUGO, + show_pwm1, set_pwm1, 6); +static SENSOR_DEVICE_ATTR(pwm1_auto_point6_temp, S_IWUSR | S_IRUGO, + show_lut_temp, set_temp8, 8); +static SENSOR_DEVICE_ATTR(pwm1_auto_point6_temp_hyst, S_IRUGO, + show_lut_temp_hyst, NULL, 8); +static SENSOR_DEVICE_ATTR(pwm1_auto_point7_pwm, S_IWUSR | S_IRUGO, + show_pwm1, set_pwm1, 7); +static SENSOR_DEVICE_ATTR(pwm1_auto_point7_temp, S_IWUSR | S_IRUGO, + show_lut_temp, set_temp8, 9); +static SENSOR_DEVICE_ATTR(pwm1_auto_point7_temp_hyst, S_IRUGO, + show_lut_temp_hyst, NULL, 9); +static SENSOR_DEVICE_ATTR(pwm1_auto_point8_pwm, S_IWUSR | S_IRUGO, + show_pwm1, set_pwm1, 8); +static SENSOR_DEVICE_ATTR(pwm1_auto_point8_temp, S_IWUSR | S_IRUGO, + show_lut_temp, set_temp8, 10); +static SENSOR_DEVICE_ATTR(pwm1_auto_point8_temp_hyst, S_IRUGO, + show_lut_temp_hyst, NULL, 10); +static SENSOR_DEVICE_ATTR(pwm1_auto_point9_pwm, S_IWUSR | S_IRUGO, + show_pwm1, set_pwm1, 9); +static SENSOR_DEVICE_ATTR(pwm1_auto_point9_temp, S_IWUSR | S_IRUGO, + show_lut_temp, set_temp8, 11); +static SENSOR_DEVICE_ATTR(pwm1_auto_point9_temp_hyst, S_IRUGO, + show_lut_temp_hyst, NULL, 11); +static SENSOR_DEVICE_ATTR(pwm1_auto_point10_pwm, S_IWUSR | S_IRUGO, + show_pwm1, set_pwm1, 10); +static SENSOR_DEVICE_ATTR(pwm1_auto_point10_temp, S_IWUSR | S_IRUGO, + show_lut_temp, set_temp8, 12); +static SENSOR_DEVICE_ATTR(pwm1_auto_point10_temp_hyst, S_IRUGO, + show_lut_temp_hyst, NULL, 12); +static SENSOR_DEVICE_ATTR(pwm1_auto_point11_pwm, S_IWUSR | S_IRUGO, + show_pwm1, set_pwm1, 11); +static SENSOR_DEVICE_ATTR(pwm1_auto_point11_temp, S_IWUSR | S_IRUGO, + show_lut_temp, set_temp8, 13); +static SENSOR_DEVICE_ATTR(pwm1_auto_point11_temp_hyst, S_IRUGO, + show_lut_temp_hyst, NULL, 13); +static SENSOR_DEVICE_ATTR(pwm1_auto_point12_pwm, S_IWUSR | S_IRUGO, + show_pwm1, set_pwm1, 12); +static SENSOR_DEVICE_ATTR(pwm1_auto_point12_temp, S_IWUSR | S_IRUGO, + show_lut_temp, set_temp8, 14); +static SENSOR_DEVICE_ATTR(pwm1_auto_point12_temp_hyst, S_IRUGO, + show_lut_temp_hyst, NULL, 14); + +static SENSOR_DEVICE_ATTR(temp1_input, S_IRUGO, show_local_temp8, NULL, 0); +static SENSOR_DEVICE_ATTR(temp1_max, S_IWUSR | S_IRUGO, show_local_temp8, + set_temp8, 1); + +static SENSOR_DEVICE_ATTR(temp2_input, S_IRUGO, show_temp11, NULL, 0); +static SENSOR_DEVICE_ATTR(temp2_min, S_IWUSR | S_IRUGO, show_temp11, + set_temp11, 1); +static SENSOR_DEVICE_ATTR(temp2_max, S_IWUSR | S_IRUGO, show_temp11, + set_temp11, 2); +static SENSOR_DEVICE_ATTR(temp2_offset, S_IWUSR | S_IRUGO, show_temp11, + set_temp11, 3); +static SENSOR_DEVICE_ATTR(temp2_crit, S_IRUGO, show_remote_temp8, + set_temp8, 2); +static DEVICE_ATTR(temp2_crit_hyst, S_IWUSR | S_IRUGO, show_temp2_crit_hyst, + set_temp2_crit_hyst); + +static DEVICE_ATTR(temp2_type, S_IWUSR | S_IRUGO, show_type, set_type); + +/* Individual alarm files */ +static SENSOR_DEVICE_ATTR(fan1_min_alarm, S_IRUGO, show_alarm, NULL, 0); +static SENSOR_DEVICE_ATTR(temp2_crit_alarm, S_IRUGO, show_alarm, NULL, 1); +static SENSOR_DEVICE_ATTR(temp2_fault, S_IRUGO, show_alarm, NULL, 2); +static SENSOR_DEVICE_ATTR(temp2_min_alarm, S_IRUGO, show_alarm, NULL, 3); +static SENSOR_DEVICE_ATTR(temp2_max_alarm, S_IRUGO, show_alarm, NULL, 4); +static SENSOR_DEVICE_ATTR(temp1_max_alarm, S_IRUGO, show_alarm, NULL, 6); +/* Raw alarm file for compatibility */ +static DEVICE_ATTR(alarms, S_IRUGO, show_alarms, NULL); + +static DEVICE_ATTR(update_interval, S_IRUGO | S_IWUSR, show_update_interval, + set_update_interval); + +static struct attribute *lm63_attributes[] = { + &sensor_dev_attr_pwm1.dev_attr.attr, + &dev_attr_pwm1_enable.attr, + &sensor_dev_attr_pwm1_auto_point1_pwm.dev_attr.attr, + &sensor_dev_attr_pwm1_auto_point1_temp.dev_attr.attr, + &sensor_dev_attr_pwm1_auto_point1_temp_hyst.dev_attr.attr, + &sensor_dev_attr_pwm1_auto_point2_pwm.dev_attr.attr, + &sensor_dev_attr_pwm1_auto_point2_temp.dev_attr.attr, + &sensor_dev_attr_pwm1_auto_point2_temp_hyst.dev_attr.attr, + &sensor_dev_attr_pwm1_auto_point3_pwm.dev_attr.attr, + &sensor_dev_attr_pwm1_auto_point3_temp.dev_attr.attr, + &sensor_dev_attr_pwm1_auto_point3_temp_hyst.dev_attr.attr, + &sensor_dev_attr_pwm1_auto_point4_pwm.dev_attr.attr, + &sensor_dev_attr_pwm1_auto_point4_temp.dev_attr.attr, + &sensor_dev_attr_pwm1_auto_point4_temp_hyst.dev_attr.attr, + &sensor_dev_attr_pwm1_auto_point5_pwm.dev_attr.attr, + &sensor_dev_attr_pwm1_auto_point5_temp.dev_attr.attr, + &sensor_dev_attr_pwm1_auto_point5_temp_hyst.dev_attr.attr, + &sensor_dev_attr_pwm1_auto_point6_pwm.dev_attr.attr, + &sensor_dev_attr_pwm1_auto_point6_temp.dev_attr.attr, + &sensor_dev_attr_pwm1_auto_point6_temp_hyst.dev_attr.attr, + &sensor_dev_attr_pwm1_auto_point7_pwm.dev_attr.attr, + &sensor_dev_attr_pwm1_auto_point7_temp.dev_attr.attr, + &sensor_dev_attr_pwm1_auto_point7_temp_hyst.dev_attr.attr, + &sensor_dev_attr_pwm1_auto_point8_pwm.dev_attr.attr, + &sensor_dev_attr_pwm1_auto_point8_temp.dev_attr.attr, + &sensor_dev_attr_pwm1_auto_point8_temp_hyst.dev_attr.attr, + + &sensor_dev_attr_temp1_input.dev_attr.attr, + &sensor_dev_attr_temp2_input.dev_attr.attr, + &sensor_dev_attr_temp2_min.dev_attr.attr, + &sensor_dev_attr_temp1_max.dev_attr.attr, + &sensor_dev_attr_temp2_max.dev_attr.attr, + &sensor_dev_attr_temp2_offset.dev_attr.attr, + &sensor_dev_attr_temp2_crit.dev_attr.attr, + &dev_attr_temp2_crit_hyst.attr, + + &sensor_dev_attr_temp2_crit_alarm.dev_attr.attr, + &sensor_dev_attr_temp2_fault.dev_attr.attr, + &sensor_dev_attr_temp2_min_alarm.dev_attr.attr, + &sensor_dev_attr_temp2_max_alarm.dev_attr.attr, + &sensor_dev_attr_temp1_max_alarm.dev_attr.attr, + &dev_attr_alarms.attr, + &dev_attr_update_interval.attr, + NULL +}; + +static struct attribute *lm63_attributes_temp2_type[] = { + &dev_attr_temp2_type.attr, + NULL +}; + +static const struct attribute_group lm63_group_temp2_type = { + .attrs = lm63_attributes_temp2_type, +}; + +static struct attribute *lm63_attributes_extra_lut[] = { + &sensor_dev_attr_pwm1_auto_point9_pwm.dev_attr.attr, + &sensor_dev_attr_pwm1_auto_point9_temp.dev_attr.attr, + &sensor_dev_attr_pwm1_auto_point9_temp_hyst.dev_attr.attr, + &sensor_dev_attr_pwm1_auto_point10_pwm.dev_attr.attr, + &sensor_dev_attr_pwm1_auto_point10_temp.dev_attr.attr, + &sensor_dev_attr_pwm1_auto_point10_temp_hyst.dev_attr.attr, + &sensor_dev_attr_pwm1_auto_point11_pwm.dev_attr.attr, + &sensor_dev_attr_pwm1_auto_point11_temp.dev_attr.attr, + &sensor_dev_attr_pwm1_auto_point11_temp_hyst.dev_attr.attr, + &sensor_dev_attr_pwm1_auto_point12_pwm.dev_attr.attr, + &sensor_dev_attr_pwm1_auto_point12_temp.dev_attr.attr, + &sensor_dev_attr_pwm1_auto_point12_temp_hyst.dev_attr.attr, + NULL +}; + +static const struct attribute_group lm63_group_extra_lut = { + .attrs = lm63_attributes_extra_lut, +}; + +/* + * On LM63, temp2_crit can be set only once, which should be job + * of the bootloader. + * On LM64, temp2_crit can always be set. + * On LM96163, temp2_crit can be set if bit 1 of the configuration + * register is true. + */ +static umode_t lm63_attribute_mode(struct kobject *kobj, + struct attribute *attr, int index) +{ + struct device *dev = container_of(kobj, struct device, kobj); + struct lm63_data *data = dev_get_drvdata(dev); + + if (attr == &sensor_dev_attr_temp2_crit.dev_attr.attr + && (data->kind == lm64 || + (data->kind == lm96163 && (data->config & 0x02)))) + return attr->mode | S_IWUSR; + + return attr->mode; +} + +static const struct attribute_group lm63_group = { + .is_visible = lm63_attribute_mode, + .attrs = lm63_attributes, +}; + +static struct attribute *lm63_attributes_fan1[] = { + &sensor_dev_attr_fan1_input.dev_attr.attr, + &sensor_dev_attr_fan1_min.dev_attr.attr, + + &sensor_dev_attr_fan1_min_alarm.dev_attr.attr, + NULL +}; + +static const struct attribute_group lm63_group_fan1 = { + .attrs = lm63_attributes_fan1, +}; + +/* + * Real code + */ + +/* Return 0 if detection is successful, -ENODEV otherwise */ +static int lm63_detect(struct i2c_client *client, + struct i2c_board_info *info) +{ + struct i2c_adapter *adapter = client->adapter; + u8 man_id, chip_id, reg_config1, reg_config2; + u8 reg_alert_status, reg_alert_mask; + int address = client->addr; + + if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA)) + return -ENODEV; + + man_id = i2c_smbus_read_byte_data(client, LM63_REG_MAN_ID); + chip_id = i2c_smbus_read_byte_data(client, LM63_REG_CHIP_ID); + + reg_config1 = i2c_smbus_read_byte_data(client, LM63_REG_CONFIG1); + reg_config2 = i2c_smbus_read_byte_data(client, LM63_REG_CONFIG2); + reg_alert_status = i2c_smbus_read_byte_data(client, + LM63_REG_ALERT_STATUS); + reg_alert_mask = i2c_smbus_read_byte_data(client, LM63_REG_ALERT_MASK); + + if (man_id != 0x01 /* National Semiconductor */ + || (reg_config1 & 0x18) != 0x00 + || (reg_config2 & 0xF8) != 0x00 + || (reg_alert_status & 0x20) != 0x00 + || (reg_alert_mask & 0xA4) != 0xA4) { + dev_dbg(&adapter->dev, + "Unsupported chip (man_id=0x%02X, chip_id=0x%02X)\n", + man_id, chip_id); + return -ENODEV; + } + + if (chip_id == 0x41 && address == 0x4c) + strlcpy(info->type, "lm63", I2C_NAME_SIZE); + else if (chip_id == 0x51 && (address == 0x18 || address == 0x4e)) + strlcpy(info->type, "lm64", I2C_NAME_SIZE); + else if (chip_id == 0x49 && address == 0x4c) + strlcpy(info->type, "lm96163", I2C_NAME_SIZE); + else + return -ENODEV; + + return 0; +} + +/* + * Ideally we shouldn't have to initialize anything, since the BIOS + * should have taken care of everything + */ +static void lm63_init_client(struct lm63_data *data) +{ + struct i2c_client *client = data->client; + struct device *dev = &client->dev; + u8 convrate; + + data->config = i2c_smbus_read_byte_data(client, LM63_REG_CONFIG1); + data->config_fan = i2c_smbus_read_byte_data(client, + LM63_REG_CONFIG_FAN); + + /* Start converting if needed */ + if (data->config & 0x40) { /* standby */ + dev_dbg(dev, "Switching to operational mode\n"); + data->config &= 0xA7; + i2c_smbus_write_byte_data(client, LM63_REG_CONFIG1, + data->config); + } + /* Tachometer is always enabled on LM64 */ + if (data->kind == lm64) + data->config |= 0x04; + + /* We may need pwm1_freq before ever updating the client data */ + data->pwm1_freq = i2c_smbus_read_byte_data(client, LM63_REG_PWM_FREQ); + if (data->pwm1_freq == 0) + data->pwm1_freq = 1; + + switch (data->kind) { + case lm63: + case lm64: + data->max_convrate_hz = LM63_MAX_CONVRATE_HZ; + data->lut_size = 8; + break; + case lm96163: + data->max_convrate_hz = LM96163_MAX_CONVRATE_HZ; + data->lut_size = 12; + data->trutherm + = i2c_smbus_read_byte_data(client, + LM96163_REG_TRUTHERM) & 0x02; + break; + } + convrate = i2c_smbus_read_byte_data(client, LM63_REG_CONVRATE); + if (unlikely(convrate > LM63_MAX_CONVRATE)) + convrate = LM63_MAX_CONVRATE; + data->update_interval = UPDATE_INTERVAL(data->max_convrate_hz, + convrate); + + /* + * For LM96163, check if high resolution PWM + * and unsigned temperature format is enabled. + */ + if (data->kind == lm96163) { + u8 config_enhanced + = i2c_smbus_read_byte_data(client, + LM96163_REG_CONFIG_ENHANCED); + if (config_enhanced & 0x20) + data->lut_temp_highres = true; + if ((config_enhanced & 0x10) + && !(data->config_fan & 0x08) && data->pwm1_freq == 8) + data->pwm_highres = true; + if (config_enhanced & 0x08) + data->remote_unsigned = true; + } + + /* Show some debug info about the LM63 configuration */ + if (data->kind == lm63) + dev_dbg(dev, "Alert/tach pin configured for %s\n", + (data->config & 0x04) ? "tachometer input" : + "alert output"); + dev_dbg(dev, "PWM clock %s kHz, output frequency %u Hz\n", + (data->config_fan & 0x08) ? "1.4" : "360", + ((data->config_fan & 0x08) ? 700 : 180000) / data->pwm1_freq); + dev_dbg(dev, "PWM output active %s, %s mode\n", + (data->config_fan & 0x10) ? "low" : "high", + (data->config_fan & 0x20) ? "manual" : "auto"); +} + +static int lm63_probe(struct i2c_client *client, + const struct i2c_device_id *id) +{ + struct device *dev = &client->dev; + struct device *hwmon_dev; + struct lm63_data *data; + int groups = 0; + + data = devm_kzalloc(dev, sizeof(struct lm63_data), GFP_KERNEL); + if (!data) + return -ENOMEM; + + data->client = client; + mutex_init(&data->update_lock); + + /* Set the device type */ + data->kind = id->driver_data; + if (data->kind == lm64) + data->temp2_offset = 16000; + + /* Initialize chip */ + lm63_init_client(data); + + /* Register sysfs hooks */ + data->groups[groups++] = &lm63_group; + if (data->config & 0x04) /* tachometer enabled */ + data->groups[groups++] = &lm63_group_fan1; + + if (data->kind == lm96163) { + data->groups[groups++] = &lm63_group_temp2_type; + data->groups[groups++] = &lm63_group_extra_lut; + } + + hwmon_dev = devm_hwmon_device_register_with_groups(dev, client->name, + data, data->groups); + return PTR_ERR_OR_ZERO(hwmon_dev); +} + +/* + * Driver data (common to all clients) + */ + +static const struct i2c_device_id lm63_id[] = { + { "lm63", lm63 }, + { "lm64", lm64 }, + { "lm96163", lm96163 }, + { } +}; +MODULE_DEVICE_TABLE(i2c, lm63_id); + +static struct i2c_driver lm63_driver = { + .class = I2C_CLASS_HWMON, + .driver = { + .name = "lm63", + }, + .probe = lm63_probe, + .id_table = lm63_id, + .detect = lm63_detect, + .address_list = normal_i2c, +}; + +module_i2c_driver(lm63_driver); + +MODULE_AUTHOR("Jean Delvare <jdelvare@suse.de>"); +MODULE_DESCRIPTION("LM63 driver"); +MODULE_LICENSE("GPL"); |