diff options
Diffstat (limited to 'drivers/hwmon/lm85.c')
| -rw-r--r-- | drivers/hwmon/lm85.c | 1642 |
1 files changed, 1642 insertions, 0 deletions
diff --git a/drivers/hwmon/lm85.c b/drivers/hwmon/lm85.c new file mode 100644 index 000000000..6ff773fca --- /dev/null +++ b/drivers/hwmon/lm85.c @@ -0,0 +1,1642 @@ +/* + * lm85.c - Part of lm_sensors, Linux kernel modules for hardware + * monitoring + * Copyright (c) 1998, 1999 Frodo Looijaard <frodol@dds.nl> + * Copyright (c) 2002, 2003 Philip Pokorny <ppokorny@penguincomputing.com> + * Copyright (c) 2003 Margit Schubert-While <margitsw@t-online.de> + * Copyright (c) 2004 Justin Thiessen <jthiessen@penguincomputing.com> + * Copyright (C) 2007--2014 Jean Delvare <jdelvare@suse.de> + * + * Chip details at <http://www.national.com/ds/LM/LM85.pdf> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#include <linux/module.h> +#include <linux/init.h> +#include <linux/slab.h> +#include <linux/jiffies.h> +#include <linux/i2c.h> +#include <linux/hwmon.h> +#include <linux/hwmon-vid.h> +#include <linux/hwmon-sysfs.h> +#include <linux/err.h> +#include <linux/mutex.h> +#include <linux/util_macros.h> + +/* Addresses to scan */ +static const unsigned short normal_i2c[] = { 0x2c, 0x2d, 0x2e, I2C_CLIENT_END }; + +enum chips { + lm85, + adm1027, adt7463, adt7468, + emc6d100, emc6d102, emc6d103, emc6d103s +}; + +/* The LM85 registers */ + +#define LM85_REG_IN(nr) (0x20 + (nr)) +#define LM85_REG_IN_MIN(nr) (0x44 + (nr) * 2) +#define LM85_REG_IN_MAX(nr) (0x45 + (nr) * 2) + +#define LM85_REG_TEMP(nr) (0x25 + (nr)) +#define LM85_REG_TEMP_MIN(nr) (0x4e + (nr) * 2) +#define LM85_REG_TEMP_MAX(nr) (0x4f + (nr) * 2) + +/* Fan speeds are LSB, MSB (2 bytes) */ +#define LM85_REG_FAN(nr) (0x28 + (nr) * 2) +#define LM85_REG_FAN_MIN(nr) (0x54 + (nr) * 2) + +#define LM85_REG_PWM(nr) (0x30 + (nr)) + +#define LM85_REG_COMPANY 0x3e +#define LM85_REG_VERSTEP 0x3f + +#define ADT7468_REG_CFG5 0x7c +#define ADT7468_OFF64 (1 << 0) +#define ADT7468_HFPWM (1 << 1) +#define IS_ADT7468_OFF64(data) \ + ((data)->type == adt7468 && !((data)->cfg5 & ADT7468_OFF64)) +#define IS_ADT7468_HFPWM(data) \ + ((data)->type == adt7468 && !((data)->cfg5 & ADT7468_HFPWM)) + +/* These are the recognized values for the above regs */ +#define LM85_COMPANY_NATIONAL 0x01 +#define LM85_COMPANY_ANALOG_DEV 0x41 +#define LM85_COMPANY_SMSC 0x5c +#define LM85_VERSTEP_LM85C 0x60 +#define LM85_VERSTEP_LM85B 0x62 +#define LM85_VERSTEP_LM96000_1 0x68 +#define LM85_VERSTEP_LM96000_2 0x69 +#define LM85_VERSTEP_ADM1027 0x60 +#define LM85_VERSTEP_ADT7463 0x62 +#define LM85_VERSTEP_ADT7463C 0x6A +#define LM85_VERSTEP_ADT7468_1 0x71 +#define LM85_VERSTEP_ADT7468_2 0x72 +#define LM85_VERSTEP_EMC6D100_A0 0x60 +#define LM85_VERSTEP_EMC6D100_A1 0x61 +#define LM85_VERSTEP_EMC6D102 0x65 +#define LM85_VERSTEP_EMC6D103_A0 0x68 +#define LM85_VERSTEP_EMC6D103_A1 0x69 +#define LM85_VERSTEP_EMC6D103S 0x6A /* Also known as EMC6D103:A2 */ + +#define LM85_REG_CONFIG 0x40 + +#define LM85_REG_ALARM1 0x41 +#define LM85_REG_ALARM2 0x42 + +#define LM85_REG_VID 0x43 + +/* Automated FAN control */ +#define LM85_REG_AFAN_CONFIG(nr) (0x5c + (nr)) +#define LM85_REG_AFAN_RANGE(nr) (0x5f + (nr)) +#define LM85_REG_AFAN_SPIKE1 0x62 +#define LM85_REG_AFAN_MINPWM(nr) (0x64 + (nr)) +#define LM85_REG_AFAN_LIMIT(nr) (0x67 + (nr)) +#define LM85_REG_AFAN_CRITICAL(nr) (0x6a + (nr)) +#define LM85_REG_AFAN_HYST1 0x6d +#define LM85_REG_AFAN_HYST2 0x6e + +#define ADM1027_REG_EXTEND_ADC1 0x76 +#define ADM1027_REG_EXTEND_ADC2 0x77 + +#define EMC6D100_REG_ALARM3 0x7d +/* IN5, IN6 and IN7 */ +#define EMC6D100_REG_IN(nr) (0x70 + ((nr) - 5)) +#define EMC6D100_REG_IN_MIN(nr) (0x73 + ((nr) - 5) * 2) +#define EMC6D100_REG_IN_MAX(nr) (0x74 + ((nr) - 5) * 2) +#define EMC6D102_REG_EXTEND_ADC1 0x85 +#define EMC6D102_REG_EXTEND_ADC2 0x86 +#define EMC6D102_REG_EXTEND_ADC3 0x87 +#define EMC6D102_REG_EXTEND_ADC4 0x88 + +/* + * Conversions. Rounding and limit checking is only done on the TO_REG + * variants. Note that you should be a bit careful with which arguments + * these macros are called: arguments may be evaluated more than once. + */ + +/* IN are scaled according to built-in resistors */ +static const int lm85_scaling[] = { /* .001 Volts */ + 2500, 2250, 3300, 5000, 12000, + 3300, 1500, 1800 /*EMC6D100*/ +}; +#define SCALE(val, from, to) (((val) * (to) + ((from) / 2)) / (from)) + +#define INS_TO_REG(n, val) \ + clamp_val(SCALE(val, lm85_scaling[n], 192), 0, 255) + +#define INSEXT_FROM_REG(n, val, ext) \ + SCALE(((val) << 4) + (ext), 192 << 4, lm85_scaling[n]) + +#define INS_FROM_REG(n, val) SCALE((val), 192, lm85_scaling[n]) + +/* FAN speed is measured using 90kHz clock */ +static inline u16 FAN_TO_REG(unsigned long val) +{ + if (!val) + return 0xffff; + return clamp_val(5400000 / val, 1, 0xfffe); +} +#define FAN_FROM_REG(val) ((val) == 0 ? -1 : (val) == 0xffff ? 0 : \ + 5400000 / (val)) + +/* Temperature is reported in .001 degC increments */ +#define TEMP_TO_REG(val) \ + DIV_ROUND_CLOSEST(clamp_val((val), -127000, 127000), 1000) +#define TEMPEXT_FROM_REG(val, ext) \ + SCALE(((val) << 4) + (ext), 16, 1000) +#define TEMP_FROM_REG(val) ((val) * 1000) + +#define PWM_TO_REG(val) clamp_val(val, 0, 255) +#define PWM_FROM_REG(val) (val) + + +/* + * ZONEs have the following parameters: + * Limit (low) temp, 1. degC + * Hysteresis (below limit), 1. degC (0-15) + * Range of speed control, .1 degC (2-80) + * Critical (high) temp, 1. degC + * + * FAN PWMs have the following parameters: + * Reference Zone, 1, 2, 3, etc. + * Spinup time, .05 sec + * PWM value at limit/low temp, 1 count + * PWM Frequency, 1. Hz + * PWM is Min or OFF below limit, flag + * Invert PWM output, flag + * + * Some chips filter the temp, others the fan. + * Filter constant (or disabled) .1 seconds + */ + +/* These are the zone temperature range encodings in .001 degree C */ +static const int lm85_range_map[] = { + 2000, 2500, 3300, 4000, 5000, 6600, 8000, 10000, + 13300, 16000, 20000, 26600, 32000, 40000, 53300, 80000 +}; + +static int RANGE_TO_REG(long range) +{ + return find_closest(range, lm85_range_map, ARRAY_SIZE(lm85_range_map)); +} +#define RANGE_FROM_REG(val) lm85_range_map[(val) & 0x0f] + +/* These are the PWM frequency encodings */ +static const int lm85_freq_map[8] = { /* 1 Hz */ + 10, 15, 23, 30, 38, 47, 61, 94 +}; +static const int adm1027_freq_map[8] = { /* 1 Hz */ + 11, 15, 22, 29, 35, 44, 59, 88 +}; +#define FREQ_MAP_LEN 8 + +static int FREQ_TO_REG(const int *map, + unsigned int map_size, unsigned long freq) +{ + return find_closest(freq, map, map_size); +} + +static int FREQ_FROM_REG(const int *map, u8 reg) +{ + return map[reg & 0x07]; +} + +/* + * Since we can't use strings, I'm abusing these numbers + * to stand in for the following meanings: + * 1 -- PWM responds to Zone 1 + * 2 -- PWM responds to Zone 2 + * 3 -- PWM responds to Zone 3 + * 23 -- PWM responds to the higher temp of Zone 2 or 3 + * 123 -- PWM responds to highest of Zone 1, 2, or 3 + * 0 -- PWM is always at 0% (ie, off) + * -1 -- PWM is always at 100% + * -2 -- PWM responds to manual control + */ + +static const int lm85_zone_map[] = { 1, 2, 3, -1, 0, 23, 123, -2 }; +#define ZONE_FROM_REG(val) lm85_zone_map[(val) >> 5] + +static int ZONE_TO_REG(int zone) +{ + int i; + + for (i = 0; i <= 7; ++i) + if (zone == lm85_zone_map[i]) + break; + if (i > 7) /* Not found. */ + i = 3; /* Always 100% */ + return i << 5; +} + +#define HYST_TO_REG(val) clamp_val(((val) + 500) / 1000, 0, 15) +#define HYST_FROM_REG(val) ((val) * 1000) + +/* + * Chip sampling rates + * + * Some sensors are not updated more frequently than once per second + * so it doesn't make sense to read them more often than that. + * We cache the results and return the saved data if the driver + * is called again before a second has elapsed. + * + * Also, there is significant configuration data for this chip + * given the automatic PWM fan control that is possible. There + * are about 47 bytes of config data to only 22 bytes of actual + * readings. So, we keep the config data up to date in the cache + * when it is written and only sample it once every 1 *minute* + */ +#define LM85_DATA_INTERVAL (HZ + HZ / 2) +#define LM85_CONFIG_INTERVAL (1 * 60 * HZ) + +/* + * LM85 can automatically adjust fan speeds based on temperature + * This structure encapsulates an entire Zone config. There are + * three zones (one for each temperature input) on the lm85 + */ +struct lm85_zone { + s8 limit; /* Low temp limit */ + u8 hyst; /* Low limit hysteresis. (0-15) */ + u8 range; /* Temp range, encoded */ + s8 critical; /* "All fans ON" temp limit */ + u8 max_desired; /* + * Actual "max" temperature specified. Preserved + * to prevent "drift" as other autofan control + * values change. + */ +}; + +struct lm85_autofan { + u8 config; /* Register value */ + u8 min_pwm; /* Minimum PWM value, encoded */ + u8 min_off; /* Min PWM or OFF below "limit", flag */ +}; + +/* + * For each registered chip, we need to keep some data in memory. + * The structure is dynamically allocated. + */ +struct lm85_data { + struct i2c_client *client; + const struct attribute_group *groups[6]; + const int *freq_map; + enum chips type; + + bool has_vid5; /* true if VID5 is configured for ADT7463 or ADT7468 */ + + struct mutex update_lock; + int valid; /* !=0 if following fields are valid */ + unsigned long last_reading; /* In jiffies */ + unsigned long last_config; /* In jiffies */ + + u8 in[8]; /* Register value */ + u8 in_max[8]; /* Register value */ + u8 in_min[8]; /* Register value */ + s8 temp[3]; /* Register value */ + s8 temp_min[3]; /* Register value */ + s8 temp_max[3]; /* Register value */ + u16 fan[4]; /* Register value */ + u16 fan_min[4]; /* Register value */ + u8 pwm[3]; /* Register value */ + u8 pwm_freq[3]; /* Register encoding */ + u8 temp_ext[3]; /* Decoded values */ + u8 in_ext[8]; /* Decoded values */ + u8 vid; /* Register value */ + u8 vrm; /* VRM version */ + u32 alarms; /* Register encoding, combined */ + u8 cfg5; /* Config Register 5 on ADT7468 */ + struct lm85_autofan autofan[3]; + struct lm85_zone zone[3]; +}; + +static int lm85_read_value(struct i2c_client *client, u8 reg) +{ + int res; + + /* What size location is it? */ + switch (reg) { + case LM85_REG_FAN(0): /* Read WORD data */ + case LM85_REG_FAN(1): + case LM85_REG_FAN(2): + case LM85_REG_FAN(3): + case LM85_REG_FAN_MIN(0): + case LM85_REG_FAN_MIN(1): + case LM85_REG_FAN_MIN(2): + case LM85_REG_FAN_MIN(3): + case LM85_REG_ALARM1: /* Read both bytes at once */ + res = i2c_smbus_read_byte_data(client, reg) & 0xff; + res |= i2c_smbus_read_byte_data(client, reg + 1) << 8; + break; + default: /* Read BYTE data */ + res = i2c_smbus_read_byte_data(client, reg); + break; + } + + return res; +} + +static void lm85_write_value(struct i2c_client *client, u8 reg, int value) +{ + switch (reg) { + case LM85_REG_FAN(0): /* Write WORD data */ + case LM85_REG_FAN(1): + case LM85_REG_FAN(2): + case LM85_REG_FAN(3): + case LM85_REG_FAN_MIN(0): + case LM85_REG_FAN_MIN(1): + case LM85_REG_FAN_MIN(2): + case LM85_REG_FAN_MIN(3): + /* NOTE: ALARM is read only, so not included here */ + i2c_smbus_write_byte_data(client, reg, value & 0xff); + i2c_smbus_write_byte_data(client, reg + 1, value >> 8); + break; + default: /* Write BYTE data */ + i2c_smbus_write_byte_data(client, reg, value); + break; + } +} + +static struct lm85_data *lm85_update_device(struct device *dev) +{ + struct lm85_data *data = dev_get_drvdata(dev); + struct i2c_client *client = data->client; + int i; + + mutex_lock(&data->update_lock); + + if (!data->valid || + time_after(jiffies, data->last_reading + LM85_DATA_INTERVAL)) { + /* Things that change quickly */ + dev_dbg(&client->dev, "Reading sensor values\n"); + + /* + * Have to read extended bits first to "freeze" the + * more significant bits that are read later. + * There are 2 additional resolution bits per channel and we + * have room for 4, so we shift them to the left. + */ + if (data->type == adm1027 || data->type == adt7463 || + data->type == adt7468) { + int ext1 = lm85_read_value(client, + ADM1027_REG_EXTEND_ADC1); + int ext2 = lm85_read_value(client, + ADM1027_REG_EXTEND_ADC2); + int val = (ext1 << 8) + ext2; + + for (i = 0; i <= 4; i++) + data->in_ext[i] = + ((val >> (i * 2)) & 0x03) << 2; + + for (i = 0; i <= 2; i++) + data->temp_ext[i] = + (val >> ((i + 4) * 2)) & 0x0c; + } + + data->vid = lm85_read_value(client, LM85_REG_VID); + + for (i = 0; i <= 3; ++i) { + data->in[i] = + lm85_read_value(client, LM85_REG_IN(i)); + data->fan[i] = + lm85_read_value(client, LM85_REG_FAN(i)); + } + + if (!data->has_vid5) + data->in[4] = lm85_read_value(client, LM85_REG_IN(4)); + + if (data->type == adt7468) + data->cfg5 = lm85_read_value(client, ADT7468_REG_CFG5); + + for (i = 0; i <= 2; ++i) { + data->temp[i] = + lm85_read_value(client, LM85_REG_TEMP(i)); + data->pwm[i] = + lm85_read_value(client, LM85_REG_PWM(i)); + + if (IS_ADT7468_OFF64(data)) + data->temp[i] -= 64; + } + + data->alarms = lm85_read_value(client, LM85_REG_ALARM1); + + if (data->type == emc6d100) { + /* Three more voltage sensors */ + for (i = 5; i <= 7; ++i) { + data->in[i] = lm85_read_value(client, + EMC6D100_REG_IN(i)); + } + /* More alarm bits */ + data->alarms |= lm85_read_value(client, + EMC6D100_REG_ALARM3) << 16; + } else if (data->type == emc6d102 || data->type == emc6d103 || + data->type == emc6d103s) { + /* + * Have to read LSB bits after the MSB ones because + * the reading of the MSB bits has frozen the + * LSBs (backward from the ADM1027). + */ + int ext1 = lm85_read_value(client, + EMC6D102_REG_EXTEND_ADC1); + int ext2 = lm85_read_value(client, + EMC6D102_REG_EXTEND_ADC2); + int ext3 = lm85_read_value(client, + EMC6D102_REG_EXTEND_ADC3); + int ext4 = lm85_read_value(client, + EMC6D102_REG_EXTEND_ADC4); + data->in_ext[0] = ext3 & 0x0f; + data->in_ext[1] = ext4 & 0x0f; + data->in_ext[2] = ext4 >> 4; + data->in_ext[3] = ext3 >> 4; + data->in_ext[4] = ext2 >> 4; + + data->temp_ext[0] = ext1 & 0x0f; + data->temp_ext[1] = ext2 & 0x0f; + data->temp_ext[2] = ext1 >> 4; + } + + data->last_reading = jiffies; + } /* last_reading */ + + if (!data->valid || + time_after(jiffies, data->last_config + LM85_CONFIG_INTERVAL)) { + /* Things that don't change often */ + dev_dbg(&client->dev, "Reading config values\n"); + + for (i = 0; i <= 3; ++i) { + data->in_min[i] = + lm85_read_value(client, LM85_REG_IN_MIN(i)); + data->in_max[i] = + lm85_read_value(client, LM85_REG_IN_MAX(i)); + data->fan_min[i] = + lm85_read_value(client, LM85_REG_FAN_MIN(i)); + } + + if (!data->has_vid5) { + data->in_min[4] = lm85_read_value(client, + LM85_REG_IN_MIN(4)); + data->in_max[4] = lm85_read_value(client, + LM85_REG_IN_MAX(4)); + } + + if (data->type == emc6d100) { + for (i = 5; i <= 7; ++i) { + data->in_min[i] = lm85_read_value(client, + EMC6D100_REG_IN_MIN(i)); + data->in_max[i] = lm85_read_value(client, + EMC6D100_REG_IN_MAX(i)); + } + } + + for (i = 0; i <= 2; ++i) { + int val; + + data->temp_min[i] = + lm85_read_value(client, LM85_REG_TEMP_MIN(i)); + data->temp_max[i] = + lm85_read_value(client, LM85_REG_TEMP_MAX(i)); + + data->autofan[i].config = + lm85_read_value(client, LM85_REG_AFAN_CONFIG(i)); + val = lm85_read_value(client, LM85_REG_AFAN_RANGE(i)); + data->pwm_freq[i] = val & 0x07; + data->zone[i].range = val >> 4; + data->autofan[i].min_pwm = + lm85_read_value(client, LM85_REG_AFAN_MINPWM(i)); + data->zone[i].limit = + lm85_read_value(client, LM85_REG_AFAN_LIMIT(i)); + data->zone[i].critical = + lm85_read_value(client, LM85_REG_AFAN_CRITICAL(i)); + + if (IS_ADT7468_OFF64(data)) { + data->temp_min[i] -= 64; + data->temp_max[i] -= 64; + data->zone[i].limit -= 64; + data->zone[i].critical -= 64; + } + } + + if (data->type != emc6d103s) { + i = lm85_read_value(client, LM85_REG_AFAN_SPIKE1); + data->autofan[0].min_off = (i & 0x20) != 0; + data->autofan[1].min_off = (i & 0x40) != 0; + data->autofan[2].min_off = (i & 0x80) != 0; + + i = lm85_read_value(client, LM85_REG_AFAN_HYST1); + data->zone[0].hyst = i >> 4; + data->zone[1].hyst = i & 0x0f; + + i = lm85_read_value(client, LM85_REG_AFAN_HYST2); + data->zone[2].hyst = i >> 4; + } + + data->last_config = jiffies; + } /* last_config */ + + data->valid = 1; + + mutex_unlock(&data->update_lock); + + return data; +} + +/* 4 Fans */ +static ssize_t show_fan(struct device *dev, struct device_attribute *attr, + char *buf) +{ + int nr = to_sensor_dev_attr(attr)->index; + struct lm85_data *data = lm85_update_device(dev); + return sprintf(buf, "%d\n", FAN_FROM_REG(data->fan[nr])); +} + +static ssize_t show_fan_min(struct device *dev, struct device_attribute *attr, + char *buf) +{ + int nr = to_sensor_dev_attr(attr)->index; + struct lm85_data *data = lm85_update_device(dev); + return sprintf(buf, "%d\n", FAN_FROM_REG(data->fan_min[nr])); +} + +static ssize_t set_fan_min(struct device *dev, struct device_attribute *attr, + const char *buf, size_t count) +{ + int nr = to_sensor_dev_attr(attr)->index; + struct lm85_data *data = dev_get_drvdata(dev); + struct i2c_client *client = data->client; + unsigned long val; + int err; + + err = kstrtoul(buf, 10, &val); + if (err) + return err; + + mutex_lock(&data->update_lock); + data->fan_min[nr] = FAN_TO_REG(val); + lm85_write_value(client, LM85_REG_FAN_MIN(nr), data->fan_min[nr]); + mutex_unlock(&data->update_lock); + return count; +} + +#define show_fan_offset(offset) \ +static SENSOR_DEVICE_ATTR(fan##offset##_input, S_IRUGO, \ + show_fan, NULL, offset - 1); \ +static SENSOR_DEVICE_ATTR(fan##offset##_min, S_IRUGO | S_IWUSR, \ + show_fan_min, set_fan_min, offset - 1) + +show_fan_offset(1); +show_fan_offset(2); +show_fan_offset(3); +show_fan_offset(4); + +/* vid, vrm, alarms */ + +static ssize_t show_vid_reg(struct device *dev, struct device_attribute *attr, + char *buf) +{ + struct lm85_data *data = lm85_update_device(dev); + int vid; + + if (data->has_vid5) { + /* 6-pin VID (VRM 10) */ + vid = vid_from_reg(data->vid & 0x3f, data->vrm); + } else { + /* 5-pin VID (VRM 9) */ + vid = vid_from_reg(data->vid & 0x1f, data->vrm); + } + + return sprintf(buf, "%d\n", vid); +} + +static DEVICE_ATTR(cpu0_vid, S_IRUGO, show_vid_reg, NULL); + +static ssize_t show_vrm_reg(struct device *dev, struct device_attribute *attr, + char *buf) +{ + struct lm85_data *data = dev_get_drvdata(dev); + return sprintf(buf, "%ld\n", (long) data->vrm); +} + +static ssize_t store_vrm_reg(struct device *dev, struct device_attribute *attr, + const char *buf, size_t count) +{ + struct lm85_data *data = dev_get_drvdata(dev); + unsigned long val; + int err; + + err = kstrtoul(buf, 10, &val); + if (err) + return err; + + if (val > 255) + return -EINVAL; + + data->vrm = val; + return count; +} + +static DEVICE_ATTR(vrm, S_IRUGO | S_IWUSR, show_vrm_reg, store_vrm_reg); + +static ssize_t show_alarms_reg(struct device *dev, struct device_attribute + *attr, char *buf) +{ + struct lm85_data *data = lm85_update_device(dev); + return sprintf(buf, "%u\n", data->alarms); +} + +static DEVICE_ATTR(alarms, S_IRUGO, show_alarms_reg, NULL); + +static ssize_t show_alarm(struct device *dev, struct device_attribute *attr, + char *buf) +{ + int nr = to_sensor_dev_attr(attr)->index; + struct lm85_data *data = lm85_update_device(dev); + return sprintf(buf, "%u\n", (data->alarms >> nr) & 1); +} + +static SENSOR_DEVICE_ATTR(in0_alarm, S_IRUGO, show_alarm, NULL, 0); +static SENSOR_DEVICE_ATTR(in1_alarm, S_IRUGO, show_alarm, NULL, 1); +static SENSOR_DEVICE_ATTR(in2_alarm, S_IRUGO, show_alarm, NULL, 2); +static SENSOR_DEVICE_ATTR(in3_alarm, S_IRUGO, show_alarm, NULL, 3); +static SENSOR_DEVICE_ATTR(in4_alarm, S_IRUGO, show_alarm, NULL, 8); +static SENSOR_DEVICE_ATTR(in5_alarm, S_IRUGO, show_alarm, NULL, 18); +static SENSOR_DEVICE_ATTR(in6_alarm, S_IRUGO, show_alarm, NULL, 16); +static SENSOR_DEVICE_ATTR(in7_alarm, S_IRUGO, show_alarm, NULL, 17); +static SENSOR_DEVICE_ATTR(temp1_alarm, S_IRUGO, show_alarm, NULL, 4); +static SENSOR_DEVICE_ATTR(temp1_fault, S_IRUGO, show_alarm, NULL, 14); +static SENSOR_DEVICE_ATTR(temp2_alarm, S_IRUGO, show_alarm, NULL, 5); +static SENSOR_DEVICE_ATTR(temp3_alarm, S_IRUGO, show_alarm, NULL, 6); +static SENSOR_DEVICE_ATTR(temp3_fault, S_IRUGO, show_alarm, NULL, 15); +static SENSOR_DEVICE_ATTR(fan1_alarm, S_IRUGO, show_alarm, NULL, 10); +static SENSOR_DEVICE_ATTR(fan2_alarm, S_IRUGO, show_alarm, NULL, 11); +static SENSOR_DEVICE_ATTR(fan3_alarm, S_IRUGO, show_alarm, NULL, 12); +static SENSOR_DEVICE_ATTR(fan4_alarm, S_IRUGO, show_alarm, NULL, 13); + +/* pwm */ + +static ssize_t show_pwm(struct device *dev, struct device_attribute *attr, + char *buf) +{ + int nr = to_sensor_dev_attr(attr)->index; + struct lm85_data *data = lm85_update_device(dev); + return sprintf(buf, "%d\n", PWM_FROM_REG(data->pwm[nr])); +} + +static ssize_t set_pwm(struct device *dev, struct device_attribute *attr, + const char *buf, size_t count) +{ + int nr = to_sensor_dev_attr(attr)->index; + struct lm85_data *data = dev_get_drvdata(dev); + struct i2c_client *client = data->client; + unsigned long val; + int err; + + err = kstrtoul(buf, 10, &val); + if (err) + return err; + + mutex_lock(&data->update_lock); + data->pwm[nr] = PWM_TO_REG(val); + lm85_write_value(client, LM85_REG_PWM(nr), data->pwm[nr]); + mutex_unlock(&data->update_lock); + return count; +} + +static ssize_t show_pwm_enable(struct device *dev, struct device_attribute + *attr, char *buf) +{ + int nr = to_sensor_dev_attr(attr)->index; + struct lm85_data *data = lm85_update_device(dev); + int pwm_zone, enable; + + pwm_zone = ZONE_FROM_REG(data->autofan[nr].config); + switch (pwm_zone) { + case -1: /* PWM is always at 100% */ + enable = 0; + break; + case 0: /* PWM is always at 0% */ + case -2: /* PWM responds to manual control */ + enable = 1; + break; + default: /* PWM in automatic mode */ + enable = 2; + } + return sprintf(buf, "%d\n", enable); +} + +static ssize_t set_pwm_enable(struct device *dev, struct device_attribute + *attr, const char *buf, size_t count) +{ + int nr = to_sensor_dev_attr(attr)->index; + struct lm85_data *data = dev_get_drvdata(dev); + struct i2c_client *client = data->client; + u8 config; + unsigned long val; + int err; + + err = kstrtoul(buf, 10, &val); + if (err) + return err; + + switch (val) { + case 0: + config = 3; + break; + case 1: + config = 7; + break; + case 2: + /* + * Here we have to choose arbitrarily one of the 5 possible + * configurations; I go for the safest + */ + config = 6; + break; + default: + return -EINVAL; + } + + mutex_lock(&data->update_lock); + data->autofan[nr].config = lm85_read_value(client, + LM85_REG_AFAN_CONFIG(nr)); + data->autofan[nr].config = (data->autofan[nr].config & ~0xe0) + | (config << 5); + lm85_write_value(client, LM85_REG_AFAN_CONFIG(nr), + data->autofan[nr].config); + mutex_unlock(&data->update_lock); + return count; +} + +static ssize_t show_pwm_freq(struct device *dev, + struct device_attribute *attr, char *buf) +{ + int nr = to_sensor_dev_attr(attr)->index; + struct lm85_data *data = lm85_update_device(dev); + int freq; + + if (IS_ADT7468_HFPWM(data)) + freq = 22500; + else + freq = FREQ_FROM_REG(data->freq_map, data->pwm_freq[nr]); + + return sprintf(buf, "%d\n", freq); +} + +static ssize_t set_pwm_freq(struct device *dev, + struct device_attribute *attr, const char *buf, size_t count) +{ + int nr = to_sensor_dev_attr(attr)->index; + struct lm85_data *data = dev_get_drvdata(dev); + struct i2c_client *client = data->client; + unsigned long val; + int err; + + err = kstrtoul(buf, 10, &val); + if (err) + return err; + + mutex_lock(&data->update_lock); + /* + * The ADT7468 has a special high-frequency PWM output mode, + * where all PWM outputs are driven by a 22.5 kHz clock. + * This might confuse the user, but there's not much we can do. + */ + if (data->type == adt7468 && val >= 11300) { /* High freq. mode */ + data->cfg5 &= ~ADT7468_HFPWM; + lm85_write_value(client, ADT7468_REG_CFG5, data->cfg5); + } else { /* Low freq. mode */ + data->pwm_freq[nr] = FREQ_TO_REG(data->freq_map, + FREQ_MAP_LEN, val); + lm85_write_value(client, LM85_REG_AFAN_RANGE(nr), + (data->zone[nr].range << 4) + | data->pwm_freq[nr]); + if (data->type == adt7468) { + data->cfg5 |= ADT7468_HFPWM; + lm85_write_value(client, ADT7468_REG_CFG5, data->cfg5); + } + } + mutex_unlock(&data->update_lock); + return count; +} + +#define show_pwm_reg(offset) \ +static SENSOR_DEVICE_ATTR(pwm##offset, S_IRUGO | S_IWUSR, \ + show_pwm, set_pwm, offset - 1); \ +static SENSOR_DEVICE_ATTR(pwm##offset##_enable, S_IRUGO | S_IWUSR, \ + show_pwm_enable, set_pwm_enable, offset - 1); \ +static SENSOR_DEVICE_ATTR(pwm##offset##_freq, S_IRUGO | S_IWUSR, \ + show_pwm_freq, set_pwm_freq, offset - 1) + +show_pwm_reg(1); +show_pwm_reg(2); +show_pwm_reg(3); + +/* Voltages */ + +static ssize_t show_in(struct device *dev, struct device_attribute *attr, + char *buf) +{ + int nr = to_sensor_dev_attr(attr)->index; + struct lm85_data *data = lm85_update_device(dev); + return sprintf(buf, "%d\n", INSEXT_FROM_REG(nr, data->in[nr], + data->in_ext[nr])); +} + +static ssize_t show_in_min(struct device *dev, struct device_attribute *attr, + char *buf) +{ + int nr = to_sensor_dev_attr(attr)->index; + struct lm85_data *data = lm85_update_device(dev); + return sprintf(buf, "%d\n", INS_FROM_REG(nr, data->in_min[nr])); +} + +static ssize_t set_in_min(struct device *dev, struct device_attribute *attr, + const char *buf, size_t count) +{ + int nr = to_sensor_dev_attr(attr)->index; + struct lm85_data *data = dev_get_drvdata(dev); + struct i2c_client *client = data->client; + long val; + int err; + + err = kstrtol(buf, 10, &val); + if (err) + return err; + + mutex_lock(&data->update_lock); + data->in_min[nr] = INS_TO_REG(nr, val); + lm85_write_value(client, LM85_REG_IN_MIN(nr), data->in_min[nr]); + mutex_unlock(&data->update_lock); + return count; +} + +static ssize_t show_in_max(struct device *dev, struct device_attribute *attr, + char *buf) +{ + int nr = to_sensor_dev_attr(attr)->index; + struct lm85_data *data = lm85_update_device(dev); + return sprintf(buf, "%d\n", INS_FROM_REG(nr, data->in_max[nr])); +} + +static ssize_t set_in_max(struct device *dev, struct device_attribute *attr, + const char *buf, size_t count) +{ + int nr = to_sensor_dev_attr(attr)->index; + struct lm85_data *data = dev_get_drvdata(dev); + struct i2c_client *client = data->client; + long val; + int err; + + err = kstrtol(buf, 10, &val); + if (err) + return err; + + mutex_lock(&data->update_lock); + data->in_max[nr] = INS_TO_REG(nr, val); + lm85_write_value(client, LM85_REG_IN_MAX(nr), data->in_max[nr]); + mutex_unlock(&data->update_lock); + return count; +} + +#define show_in_reg(offset) \ +static SENSOR_DEVICE_ATTR(in##offset##_input, S_IRUGO, \ + show_in, NULL, offset); \ +static SENSOR_DEVICE_ATTR(in##offset##_min, S_IRUGO | S_IWUSR, \ + show_in_min, set_in_min, offset); \ +static SENSOR_DEVICE_ATTR(in##offset##_max, S_IRUGO | S_IWUSR, \ + show_in_max, set_in_max, offset) + +show_in_reg(0); +show_in_reg(1); +show_in_reg(2); +show_in_reg(3); +show_in_reg(4); +show_in_reg(5); +show_in_reg(6); +show_in_reg(7); + +/* Temps */ + +static ssize_t show_temp(struct device *dev, struct device_attribute *attr, + char *buf) +{ + int nr = to_sensor_dev_attr(attr)->index; + struct lm85_data *data = lm85_update_device(dev); + return sprintf(buf, "%d\n", TEMPEXT_FROM_REG(data->temp[nr], + data->temp_ext[nr])); +} + +static ssize_t show_temp_min(struct device *dev, struct device_attribute *attr, + char *buf) +{ + int nr = to_sensor_dev_attr(attr)->index; + struct lm85_data *data = lm85_update_device(dev); + return sprintf(buf, "%d\n", TEMP_FROM_REG(data->temp_min[nr])); +} + +static ssize_t set_temp_min(struct device *dev, struct device_attribute *attr, + const char *buf, size_t count) +{ + int nr = to_sensor_dev_attr(attr)->index; + struct lm85_data *data = dev_get_drvdata(dev); + struct i2c_client *client = data->client; + long val; + int err; + + err = kstrtol(buf, 10, &val); + if (err) + return err; + + if (IS_ADT7468_OFF64(data)) + val += 64; + + mutex_lock(&data->update_lock); + data->temp_min[nr] = TEMP_TO_REG(val); + lm85_write_value(client, LM85_REG_TEMP_MIN(nr), data->temp_min[nr]); + mutex_unlock(&data->update_lock); + return count; +} + +static ssize_t show_temp_max(struct device *dev, struct device_attribute *attr, + char *buf) +{ + int nr = to_sensor_dev_attr(attr)->index; + struct lm85_data *data = lm85_update_device(dev); + return sprintf(buf, "%d\n", TEMP_FROM_REG(data->temp_max[nr])); +} + +static ssize_t set_temp_max(struct device *dev, struct device_attribute *attr, + const char *buf, size_t count) +{ + int nr = to_sensor_dev_attr(attr)->index; + struct lm85_data *data = dev_get_drvdata(dev); + struct i2c_client *client = data->client; + long val; + int err; + + err = kstrtol(buf, 10, &val); + if (err) + return err; + + if (IS_ADT7468_OFF64(data)) + val += 64; + + mutex_lock(&data->update_lock); + data->temp_max[nr] = TEMP_TO_REG(val); + lm85_write_value(client, LM85_REG_TEMP_MAX(nr), data->temp_max[nr]); + mutex_unlock(&data->update_lock); + return count; +} + +#define show_temp_reg(offset) \ +static SENSOR_DEVICE_ATTR(temp##offset##_input, S_IRUGO, \ + show_temp, NULL, offset - 1); \ +static SENSOR_DEVICE_ATTR(temp##offset##_min, S_IRUGO | S_IWUSR, \ + show_temp_min, set_temp_min, offset - 1); \ +static SENSOR_DEVICE_ATTR(temp##offset##_max, S_IRUGO | S_IWUSR, \ + show_temp_max, set_temp_max, offset - 1); + +show_temp_reg(1); +show_temp_reg(2); +show_temp_reg(3); + + +/* Automatic PWM control */ + +static ssize_t show_pwm_auto_channels(struct device *dev, + struct device_attribute *attr, char *buf) +{ + int nr = to_sensor_dev_attr(attr)->index; + struct lm85_data *data = lm85_update_device(dev); + return sprintf(buf, "%d\n", ZONE_FROM_REG(data->autofan[nr].config)); +} + +static ssize_t set_pwm_auto_channels(struct device *dev, + struct device_attribute *attr, const char *buf, size_t count) +{ + int nr = to_sensor_dev_attr(attr)->index; + struct lm85_data *data = dev_get_drvdata(dev); + struct i2c_client *client = data->client; + long val; + int err; + + err = kstrtol(buf, 10, &val); + if (err) + return err; + + mutex_lock(&data->update_lock); + data->autofan[nr].config = (data->autofan[nr].config & (~0xe0)) + | ZONE_TO_REG(val); + lm85_write_value(client, LM85_REG_AFAN_CONFIG(nr), + data->autofan[nr].config); + mutex_unlock(&data->update_lock); + return count; +} + +static ssize_t show_pwm_auto_pwm_min(struct device *dev, + struct device_attribute *attr, char *buf) +{ + int nr = to_sensor_dev_attr(attr)->index; + struct lm85_data *data = lm85_update_device(dev); + return sprintf(buf, "%d\n", PWM_FROM_REG(data->autofan[nr].min_pwm)); +} + +static ssize_t set_pwm_auto_pwm_min(struct device *dev, + struct device_attribute *attr, const char *buf, size_t count) +{ + int nr = to_sensor_dev_attr(attr)->index; + struct lm85_data *data = dev_get_drvdata(dev); + struct i2c_client *client = data->client; + unsigned long val; + int err; + + err = kstrtoul(buf, 10, &val); + if (err) + return err; + + mutex_lock(&data->update_lock); + data->autofan[nr].min_pwm = PWM_TO_REG(val); + lm85_write_value(client, LM85_REG_AFAN_MINPWM(nr), + data->autofan[nr].min_pwm); + mutex_unlock(&data->update_lock); + return count; +} + +static ssize_t show_pwm_auto_pwm_minctl(struct device *dev, + struct device_attribute *attr, char *buf) +{ + int nr = to_sensor_dev_attr(attr)->index; + struct lm85_data *data = lm85_update_device(dev); + return sprintf(buf, "%d\n", data->autofan[nr].min_off); +} + +static ssize_t set_pwm_auto_pwm_minctl(struct device *dev, + struct device_attribute *attr, const char *buf, size_t count) +{ + int nr = to_sensor_dev_attr(attr)->index; + struct lm85_data *data = dev_get_drvdata(dev); + struct i2c_client *client = data->client; + u8 tmp; + long val; + int err; + + err = kstrtol(buf, 10, &val); + if (err) + return err; + + mutex_lock(&data->update_lock); + data->autofan[nr].min_off = val; + tmp = lm85_read_value(client, LM85_REG_AFAN_SPIKE1); + tmp &= ~(0x20 << nr); + if (data->autofan[nr].min_off) + tmp |= 0x20 << nr; + lm85_write_value(client, LM85_REG_AFAN_SPIKE1, tmp); + mutex_unlock(&data->update_lock); + return count; +} + +#define pwm_auto(offset) \ +static SENSOR_DEVICE_ATTR(pwm##offset##_auto_channels, \ + S_IRUGO | S_IWUSR, show_pwm_auto_channels, \ + set_pwm_auto_channels, offset - 1); \ +static SENSOR_DEVICE_ATTR(pwm##offset##_auto_pwm_min, \ + S_IRUGO | S_IWUSR, show_pwm_auto_pwm_min, \ + set_pwm_auto_pwm_min, offset - 1); \ +static SENSOR_DEVICE_ATTR(pwm##offset##_auto_pwm_minctl, \ + S_IRUGO | S_IWUSR, show_pwm_auto_pwm_minctl, \ + set_pwm_auto_pwm_minctl, offset - 1) + +pwm_auto(1); +pwm_auto(2); +pwm_auto(3); + +/* Temperature settings for automatic PWM control */ + +static ssize_t show_temp_auto_temp_off(struct device *dev, + struct device_attribute *attr, char *buf) +{ + int nr = to_sensor_dev_attr(attr)->index; + struct lm85_data *data = lm85_update_device(dev); + return sprintf(buf, "%d\n", TEMP_FROM_REG(data->zone[nr].limit) - + HYST_FROM_REG(data->zone[nr].hyst)); +} + +static ssize_t set_temp_auto_temp_off(struct device *dev, + struct device_attribute *attr, const char *buf, size_t count) +{ + int nr = to_sensor_dev_attr(attr)->index; + struct lm85_data *data = dev_get_drvdata(dev); + struct i2c_client *client = data->client; + int min; + long val; + int err; + + err = kstrtol(buf, 10, &val); + if (err) + return err; + + mutex_lock(&data->update_lock); + min = TEMP_FROM_REG(data->zone[nr].limit); + data->zone[nr].hyst = HYST_TO_REG(min - val); + if (nr == 0 || nr == 1) { + lm85_write_value(client, LM85_REG_AFAN_HYST1, + (data->zone[0].hyst << 4) + | data->zone[1].hyst); + } else { + lm85_write_value(client, LM85_REG_AFAN_HYST2, + (data->zone[2].hyst << 4)); + } + mutex_unlock(&data->update_lock); + return count; +} + +static ssize_t show_temp_auto_temp_min(struct device *dev, + struct device_attribute *attr, char *buf) +{ + int nr = to_sensor_dev_attr(attr)->index; + struct lm85_data *data = lm85_update_device(dev); + return sprintf(buf, "%d\n", TEMP_FROM_REG(data->zone[nr].limit)); +} + +static ssize_t set_temp_auto_temp_min(struct device *dev, + struct device_attribute *attr, const char *buf, size_t count) +{ + int nr = to_sensor_dev_attr(attr)->index; + struct lm85_data *data = dev_get_drvdata(dev); + struct i2c_client *client = data->client; + long val; + int err; + + err = kstrtol(buf, 10, &val); + if (err) + return err; + + mutex_lock(&data->update_lock); + data->zone[nr].limit = TEMP_TO_REG(val); + lm85_write_value(client, LM85_REG_AFAN_LIMIT(nr), + data->zone[nr].limit); + +/* Update temp_auto_max and temp_auto_range */ + data->zone[nr].range = RANGE_TO_REG( + TEMP_FROM_REG(data->zone[nr].max_desired) - + TEMP_FROM_REG(data->zone[nr].limit)); + lm85_write_value(client, LM85_REG_AFAN_RANGE(nr), + ((data->zone[nr].range & 0x0f) << 4) + | (data->pwm_freq[nr] & 0x07)); + + mutex_unlock(&data->update_lock); + return count; +} + +static ssize_t show_temp_auto_temp_max(struct device *dev, + struct device_attribute *attr, char *buf) +{ + int nr = to_sensor_dev_attr(attr)->index; + struct lm85_data *data = lm85_update_device(dev); + return sprintf(buf, "%d\n", TEMP_FROM_REG(data->zone[nr].limit) + + RANGE_FROM_REG(data->zone[nr].range)); +} + +static ssize_t set_temp_auto_temp_max(struct device *dev, + struct device_attribute *attr, const char *buf, size_t count) +{ + int nr = to_sensor_dev_attr(attr)->index; + struct lm85_data *data = dev_get_drvdata(dev); + struct i2c_client *client = data->client; + int min; + long val; + int err; + + err = kstrtol(buf, 10, &val); + if (err) + return err; + + mutex_lock(&data->update_lock); + min = TEMP_FROM_REG(data->zone[nr].limit); + data->zone[nr].max_desired = TEMP_TO_REG(val); + data->zone[nr].range = RANGE_TO_REG( + val - min); + lm85_write_value(client, LM85_REG_AFAN_RANGE(nr), + ((data->zone[nr].range & 0x0f) << 4) + | (data->pwm_freq[nr] & 0x07)); + mutex_unlock(&data->update_lock); + return count; +} + +static ssize_t show_temp_auto_temp_crit(struct device *dev, + struct device_attribute *attr, char *buf) +{ + int nr = to_sensor_dev_attr(attr)->index; + struct lm85_data *data = lm85_update_device(dev); + return sprintf(buf, "%d\n", TEMP_FROM_REG(data->zone[nr].critical)); +} + +static ssize_t set_temp_auto_temp_crit(struct device *dev, + struct device_attribute *attr, const char *buf, size_t count) +{ + int nr = to_sensor_dev_attr(attr)->index; + struct lm85_data *data = dev_get_drvdata(dev); + struct i2c_client *client = data->client; + long val; + int err; + + err = kstrtol(buf, 10, &val); + if (err) + return err; + + mutex_lock(&data->update_lock); + data->zone[nr].critical = TEMP_TO_REG(val); + lm85_write_value(client, LM85_REG_AFAN_CRITICAL(nr), + data->zone[nr].critical); + mutex_unlock(&data->update_lock); + return count; +} + +#define temp_auto(offset) \ +static SENSOR_DEVICE_ATTR(temp##offset##_auto_temp_off, \ + S_IRUGO | S_IWUSR, show_temp_auto_temp_off, \ + set_temp_auto_temp_off, offset - 1); \ +static SENSOR_DEVICE_ATTR(temp##offset##_auto_temp_min, \ + S_IRUGO | S_IWUSR, show_temp_auto_temp_min, \ + set_temp_auto_temp_min, offset - 1); \ +static SENSOR_DEVICE_ATTR(temp##offset##_auto_temp_max, \ + S_IRUGO | S_IWUSR, show_temp_auto_temp_max, \ + set_temp_auto_temp_max, offset - 1); \ +static SENSOR_DEVICE_ATTR(temp##offset##_auto_temp_crit, \ + S_IRUGO | S_IWUSR, show_temp_auto_temp_crit, \ + set_temp_auto_temp_crit, offset - 1); + +temp_auto(1); +temp_auto(2); +temp_auto(3); + +static struct attribute *lm85_attributes[] = { + &sensor_dev_attr_fan1_input.dev_attr.attr, + &sensor_dev_attr_fan2_input.dev_attr.attr, + &sensor_dev_attr_fan3_input.dev_attr.attr, + &sensor_dev_attr_fan4_input.dev_attr.attr, + &sensor_dev_attr_fan1_min.dev_attr.attr, + &sensor_dev_attr_fan2_min.dev_attr.attr, + &sensor_dev_attr_fan3_min.dev_attr.attr, + &sensor_dev_attr_fan4_min.dev_attr.attr, + &sensor_dev_attr_fan1_alarm.dev_attr.attr, + &sensor_dev_attr_fan2_alarm.dev_attr.attr, + &sensor_dev_attr_fan3_alarm.dev_attr.attr, + &sensor_dev_attr_fan4_alarm.dev_attr.attr, + + &sensor_dev_attr_pwm1.dev_attr.attr, + &sensor_dev_attr_pwm2.dev_attr.attr, + &sensor_dev_attr_pwm3.dev_attr.attr, + &sensor_dev_attr_pwm1_enable.dev_attr.attr, + &sensor_dev_attr_pwm2_enable.dev_attr.attr, + &sensor_dev_attr_pwm3_enable.dev_attr.attr, + &sensor_dev_attr_pwm1_freq.dev_attr.attr, + &sensor_dev_attr_pwm2_freq.dev_attr.attr, + &sensor_dev_attr_pwm3_freq.dev_attr.attr, + + &sensor_dev_attr_in0_input.dev_attr.attr, + &sensor_dev_attr_in1_input.dev_attr.attr, + &sensor_dev_attr_in2_input.dev_attr.attr, + &sensor_dev_attr_in3_input.dev_attr.attr, + &sensor_dev_attr_in0_min.dev_attr.attr, + &sensor_dev_attr_in1_min.dev_attr.attr, + &sensor_dev_attr_in2_min.dev_attr.attr, + &sensor_dev_attr_in3_min.dev_attr.attr, + &sensor_dev_attr_in0_max.dev_attr.attr, + &sensor_dev_attr_in1_max.dev_attr.attr, + &sensor_dev_attr_in2_max.dev_attr.attr, + &sensor_dev_attr_in3_max.dev_attr.attr, + &sensor_dev_attr_in0_alarm.dev_attr.attr, + &sensor_dev_attr_in1_alarm.dev_attr.attr, + &sensor_dev_attr_in2_alarm.dev_attr.attr, + &sensor_dev_attr_in3_alarm.dev_attr.attr, + + &sensor_dev_attr_temp1_input.dev_attr.attr, + &sensor_dev_attr_temp2_input.dev_attr.attr, + &sensor_dev_attr_temp3_input.dev_attr.attr, + &sensor_dev_attr_temp1_min.dev_attr.attr, + &sensor_dev_attr_temp2_min.dev_attr.attr, + &sensor_dev_attr_temp3_min.dev_attr.attr, + &sensor_dev_attr_temp1_max.dev_attr.attr, + &sensor_dev_attr_temp2_max.dev_attr.attr, + &sensor_dev_attr_temp3_max.dev_attr.attr, + &sensor_dev_attr_temp1_alarm.dev_attr.attr, + &sensor_dev_attr_temp2_alarm.dev_attr.attr, + &sensor_dev_attr_temp3_alarm.dev_attr.attr, + &sensor_dev_attr_temp1_fault.dev_attr.attr, + &sensor_dev_attr_temp3_fault.dev_attr.attr, + + &sensor_dev_attr_pwm1_auto_channels.dev_attr.attr, + &sensor_dev_attr_pwm2_auto_channels.dev_attr.attr, + &sensor_dev_attr_pwm3_auto_channels.dev_attr.attr, + &sensor_dev_attr_pwm1_auto_pwm_min.dev_attr.attr, + &sensor_dev_attr_pwm2_auto_pwm_min.dev_attr.attr, + &sensor_dev_attr_pwm3_auto_pwm_min.dev_attr.attr, + + &sensor_dev_attr_temp1_auto_temp_min.dev_attr.attr, + &sensor_dev_attr_temp2_auto_temp_min.dev_attr.attr, + &sensor_dev_attr_temp3_auto_temp_min.dev_attr.attr, + &sensor_dev_attr_temp1_auto_temp_max.dev_attr.attr, + &sensor_dev_attr_temp2_auto_temp_max.dev_attr.attr, + &sensor_dev_attr_temp3_auto_temp_max.dev_attr.attr, + &sensor_dev_attr_temp1_auto_temp_crit.dev_attr.attr, + &sensor_dev_attr_temp2_auto_temp_crit.dev_attr.attr, + &sensor_dev_attr_temp3_auto_temp_crit.dev_attr.attr, + + &dev_attr_vrm.attr, + &dev_attr_cpu0_vid.attr, + &dev_attr_alarms.attr, + NULL +}; + +static const struct attribute_group lm85_group = { + .attrs = lm85_attributes, +}; + +static struct attribute *lm85_attributes_minctl[] = { + &sensor_dev_attr_pwm1_auto_pwm_minctl.dev_attr.attr, + &sensor_dev_attr_pwm2_auto_pwm_minctl.dev_attr.attr, + &sensor_dev_attr_pwm3_auto_pwm_minctl.dev_attr.attr, + NULL +}; + +static const struct attribute_group lm85_group_minctl = { + .attrs = lm85_attributes_minctl, +}; + +static struct attribute *lm85_attributes_temp_off[] = { + &sensor_dev_attr_temp1_auto_temp_off.dev_attr.attr, + &sensor_dev_attr_temp2_auto_temp_off.dev_attr.attr, + &sensor_dev_attr_temp3_auto_temp_off.dev_attr.attr, + NULL +}; + +static const struct attribute_group lm85_group_temp_off = { + .attrs = lm85_attributes_temp_off, +}; + +static struct attribute *lm85_attributes_in4[] = { + &sensor_dev_attr_in4_input.dev_attr.attr, + &sensor_dev_attr_in4_min.dev_attr.attr, + &sensor_dev_attr_in4_max.dev_attr.attr, + &sensor_dev_attr_in4_alarm.dev_attr.attr, + NULL +}; + +static const struct attribute_group lm85_group_in4 = { + .attrs = lm85_attributes_in4, +}; + +static struct attribute *lm85_attributes_in567[] = { + &sensor_dev_attr_in5_input.dev_attr.attr, + &sensor_dev_attr_in6_input.dev_attr.attr, + &sensor_dev_attr_in7_input.dev_attr.attr, + &sensor_dev_attr_in5_min.dev_attr.attr, + &sensor_dev_attr_in6_min.dev_attr.attr, + &sensor_dev_attr_in7_min.dev_attr.attr, + &sensor_dev_attr_in5_max.dev_attr.attr, + &sensor_dev_attr_in6_max.dev_attr.attr, + &sensor_dev_attr_in7_max.dev_attr.attr, + &sensor_dev_attr_in5_alarm.dev_attr.attr, + &sensor_dev_attr_in6_alarm.dev_attr.attr, + &sensor_dev_attr_in7_alarm.dev_attr.attr, + NULL +}; + +static const struct attribute_group lm85_group_in567 = { + .attrs = lm85_attributes_in567, +}; + +static void lm85_init_client(struct i2c_client *client) +{ + int value; + + /* Start monitoring if needed */ + value = lm85_read_value(client, LM85_REG_CONFIG); + if (!(value & 0x01)) { + dev_info(&client->dev, "Starting monitoring\n"); + lm85_write_value(client, LM85_REG_CONFIG, value | 0x01); + } + + /* Warn about unusual configuration bits */ + if (value & 0x02) + dev_warn(&client->dev, "Device configuration is locked\n"); + if (!(value & 0x04)) + dev_warn(&client->dev, "Device is not ready\n"); +} + +static int lm85_is_fake(struct i2c_client *client) +{ + /* + * Differenciate between real LM96000 and Winbond WPCD377I. The latter + * emulate the former except that it has no hardware monitoring function + * so the readings are always 0. + */ + int i; + u8 in_temp, fan; + + for (i = 0; i < 8; i++) { + in_temp = i2c_smbus_read_byte_data(client, 0x20 + i); + fan = i2c_smbus_read_byte_data(client, 0x28 + i); + if (in_temp != 0x00 || fan != 0xff) + return 0; + } + + return 1; +} + +/* Return 0 if detection is successful, -ENODEV otherwise */ +static int lm85_detect(struct i2c_client *client, struct i2c_board_info *info) +{ + struct i2c_adapter *adapter = client->adapter; + int address = client->addr; + const char *type_name = NULL; + int company, verstep; + + if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA)) { + /* We need to be able to do byte I/O */ + return -ENODEV; + } + + /* Determine the chip type */ + company = lm85_read_value(client, LM85_REG_COMPANY); + verstep = lm85_read_value(client, LM85_REG_VERSTEP); + + dev_dbg(&adapter->dev, + "Detecting device at 0x%02x with COMPANY: 0x%02x and VERSTEP: 0x%02x\n", + address, company, verstep); + + if (company == LM85_COMPANY_NATIONAL) { + switch (verstep) { + case LM85_VERSTEP_LM85C: + type_name = "lm85c"; + break; + case LM85_VERSTEP_LM85B: + type_name = "lm85b"; + break; + case LM85_VERSTEP_LM96000_1: + case LM85_VERSTEP_LM96000_2: + /* Check for Winbond WPCD377I */ + if (lm85_is_fake(client)) { + dev_dbg(&adapter->dev, + "Found Winbond WPCD377I, ignoring\n"); + return -ENODEV; + } + type_name = "lm85"; + break; + } + } else if (company == LM85_COMPANY_ANALOG_DEV) { + switch (verstep) { + case LM85_VERSTEP_ADM1027: + type_name = "adm1027"; + break; + case LM85_VERSTEP_ADT7463: + case LM85_VERSTEP_ADT7463C: + type_name = "adt7463"; + break; + case LM85_VERSTEP_ADT7468_1: + case LM85_VERSTEP_ADT7468_2: + type_name = "adt7468"; + break; + } + } else if (company == LM85_COMPANY_SMSC) { + switch (verstep) { + case LM85_VERSTEP_EMC6D100_A0: + case LM85_VERSTEP_EMC6D100_A1: + /* Note: we can't tell a '100 from a '101 */ + type_name = "emc6d100"; + break; + case LM85_VERSTEP_EMC6D102: + type_name = "emc6d102"; + break; + case LM85_VERSTEP_EMC6D103_A0: + case LM85_VERSTEP_EMC6D103_A1: + type_name = "emc6d103"; + break; + case LM85_VERSTEP_EMC6D103S: + type_name = "emc6d103s"; + break; + } + } + + if (!type_name) + return -ENODEV; + + strlcpy(info->type, type_name, I2C_NAME_SIZE); + + return 0; +} + +static int lm85_probe(struct i2c_client *client, const struct i2c_device_id *id) +{ + struct device *dev = &client->dev; + struct device *hwmon_dev; + struct lm85_data *data; + int idx = 0; + + data = devm_kzalloc(dev, sizeof(struct lm85_data), GFP_KERNEL); + if (!data) + return -ENOMEM; + + data->client = client; + data->type = id->driver_data; + mutex_init(&data->update_lock); + + /* Fill in the chip specific driver values */ + switch (data->type) { + case adm1027: + case adt7463: + case adt7468: + case emc6d100: + case emc6d102: + case emc6d103: + case emc6d103s: + data->freq_map = adm1027_freq_map; + break; + default: + data->freq_map = lm85_freq_map; + } + + /* Set the VRM version */ + data->vrm = vid_which_vrm(); + + /* Initialize the LM85 chip */ + lm85_init_client(client); + + /* sysfs hooks */ + data->groups[idx++] = &lm85_group; + + /* minctl and temp_off exist on all chips except emc6d103s */ + if (data->type != emc6d103s) { + data->groups[idx++] = &lm85_group_minctl; + data->groups[idx++] = &lm85_group_temp_off; + } + + /* + * The ADT7463/68 have an optional VRM 10 mode where pin 21 is used + * as a sixth digital VID input rather than an analog input. + */ + if (data->type == adt7463 || data->type == adt7468) { + u8 vid = lm85_read_value(client, LM85_REG_VID); + if (vid & 0x80) + data->has_vid5 = true; + } + + if (!data->has_vid5) + data->groups[idx++] = &lm85_group_in4; + + /* The EMC6D100 has 3 additional voltage inputs */ + if (data->type == emc6d100) + data->groups[idx++] = &lm85_group_in567; + + hwmon_dev = devm_hwmon_device_register_with_groups(dev, client->name, + data, data->groups); + return PTR_ERR_OR_ZERO(hwmon_dev); +} + +static const struct i2c_device_id lm85_id[] = { + { "adm1027", adm1027 }, + { "adt7463", adt7463 }, + { "adt7468", adt7468 }, + { "lm85", lm85 }, + { "lm85b", lm85 }, + { "lm85c", lm85 }, + { "emc6d100", emc6d100 }, + { "emc6d101", emc6d100 }, + { "emc6d102", emc6d102 }, + { "emc6d103", emc6d103 }, + { "emc6d103s", emc6d103s }, + { } +}; +MODULE_DEVICE_TABLE(i2c, lm85_id); + +static struct i2c_driver lm85_driver = { + .class = I2C_CLASS_HWMON, + .driver = { + .name = "lm85", + }, + .probe = lm85_probe, + .id_table = lm85_id, + .detect = lm85_detect, + .address_list = normal_i2c, +}; + +module_i2c_driver(lm85_driver); + +MODULE_LICENSE("GPL"); +MODULE_AUTHOR("Philip Pokorny <ppokorny@penguincomputing.com>, " + "Margit Schubert-While <margitsw@t-online.de>, " + "Justin Thiessen <jthiessen@penguincomputing.com>"); +MODULE_DESCRIPTION("LM85-B, LM85-C driver"); |