summaryrefslogtreecommitdiff
path: root/drivers/hwmon/pmbus/Kconfig
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/hwmon/pmbus/Kconfig')
-rw-r--r--drivers/hwmon/pmbus/Kconfig140
1 files changed, 140 insertions, 0 deletions
diff --git a/drivers/hwmon/pmbus/Kconfig b/drivers/hwmon/pmbus/Kconfig
new file mode 100644
index 000000000..9f7dbd189
--- /dev/null
+++ b/drivers/hwmon/pmbus/Kconfig
@@ -0,0 +1,140 @@
+#
+# PMBus chip drivers configuration
+#
+
+menuconfig PMBUS
+ tristate "PMBus support"
+ depends on I2C
+ default n
+ help
+ Say yes here if you want to enable PMBus support.
+
+ This driver can also be built as a module. If so, the module will
+ be called pmbus_core.
+
+if PMBUS
+
+config SENSORS_PMBUS
+ tristate "Generic PMBus devices"
+ default y
+ help
+ If you say yes here you get hardware monitoring support for generic
+ PMBus devices, including but not limited to ADP4000, BMR453, BMR454,
+ MDT040, NCP4200, NCP4208, PDT003, PDT006, PDT012, UDT020, and TPS40400.
+
+ This driver can also be built as a module. If so, the module will
+ be called pmbus.
+
+config SENSORS_ADM1275
+ tristate "Analog Devices ADM1275 and compatibles"
+ default n
+ help
+ If you say yes here you get hardware monitoring support for Analog
+ Devices ADM1075, ADM1275, and ADM1276 Hot-Swap Controller and Digital
+ Power Monitors.
+
+ This driver can also be built as a module. If so, the module will
+ be called adm1275.
+
+config SENSORS_LM25066
+ tristate "National Semiconductor LM25066 and compatibles"
+ default n
+ help
+ If you say yes here you get hardware monitoring support for National
+ Semiconductor LM25056, LM25066, LM5064, and LM5066.
+
+ This driver can also be built as a module. If so, the module will
+ be called lm25066.
+
+config SENSORS_LTC2978
+ tristate "Linear Technologies LTC2978 and compatibles"
+ default n
+ help
+ If you say yes here you get hardware monitoring support for Linear
+ Technology LTC2974, LTC2977, LTC2978, LTC3880, LTC3883, and LTM4676.
+
+ This driver can also be built as a module. If so, the module will
+ be called ltc2978.
+
+config SENSORS_LTC2978_REGULATOR
+ bool "Regulator support for LTC2978 and compatibles"
+ depends on SENSORS_LTC2978 && REGULATOR
+ help
+ If you say yes here you get regulator support for Linear
+ Technology LTC2974, LTC2977, LTC2978, LTC3880, LTC3883, and LTM4676.
+
+config SENSORS_MAX16064
+ tristate "Maxim MAX16064"
+ default n
+ help
+ If you say yes here you get hardware monitoring support for Maxim
+ MAX16064.
+
+ This driver can also be built as a module. If so, the module will
+ be called max16064.
+
+config SENSORS_MAX34440
+ tristate "Maxim MAX34440 and compatibles"
+ default n
+ help
+ If you say yes here you get hardware monitoring support for Maxim
+ MAX34440, MAX34441, MAX34446, MAX34460, and MAX34461.
+
+ This driver can also be built as a module. If so, the module will
+ be called max34440.
+
+config SENSORS_MAX8688
+ tristate "Maxim MAX8688"
+ default n
+ help
+ If you say yes here you get hardware monitoring support for Maxim
+ MAX8688.
+
+ This driver can also be built as a module. If so, the module will
+ be called max8688.
+
+config SENSORS_TPS40422
+ tristate "TI TPS40422"
+ default n
+ help
+ If you say yes here you get hardware monitoring support for TI
+ TPS40422.
+
+ This driver can also be built as a module. If so, the module will
+ be called tps40422.
+
+config SENSORS_UCD9000
+ tristate "TI UCD90120, UCD90124, UCD9090, UCD90910"
+ default n
+ help
+ If you say yes here you get hardware monitoring support for TI
+ UCD90120, UCD90124, UCD9090, UCD90910 Sequencer and System Health
+ Controllers.
+
+ This driver can also be built as a module. If so, the module will
+ be called ucd9000.
+
+config SENSORS_UCD9200
+ tristate "TI UCD9220, UCD9222, UCD9224, UCD9240, UCD9244, UCD9246, UCD9248"
+ default n
+ help
+ If you say yes here you get hardware monitoring support for TI
+ UCD9220, UCD9222, UCD9224, UCD9240, UCD9244, UCD9246, and UCD9248
+ Digital PWM System Controllers.
+
+ This driver can also be built as a module. If so, the module will
+ be called ucd9200.
+
+config SENSORS_ZL6100
+ tristate "Intersil ZL6100 and compatibles"
+ default n
+ help
+ If you say yes here you get hardware monitoring support for Intersil
+ ZL2004, ZL2005, ZL2006, ZL2008, ZL2105, ZL2106, ZL6100, ZL6105,
+ ZL9101M, and ZL9117M Digital DC/DC Controllers, as well as for
+ Ericsson BMR450, BMR451, BMR462, BMR463, and BMR464.
+
+ This driver can also be built as a module. If so, the module will
+ be called zl6100.
+
+endif # PMBUS