summaryrefslogtreecommitdiff
path: root/drivers/hwmon/pmbus/zl6100.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/hwmon/pmbus/zl6100.c')
-rw-r--r--drivers/hwmon/pmbus/zl6100.c419
1 files changed, 419 insertions, 0 deletions
diff --git a/drivers/hwmon/pmbus/zl6100.c b/drivers/hwmon/pmbus/zl6100.c
new file mode 100644
index 000000000..819644121
--- /dev/null
+++ b/drivers/hwmon/pmbus/zl6100.c
@@ -0,0 +1,419 @@
+/*
+ * Hardware monitoring driver for ZL6100 and compatibles
+ *
+ * Copyright (c) 2011 Ericsson AB.
+ * Copyright (c) 2012 Guenter Roeck
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/err.h>
+#include <linux/slab.h>
+#include <linux/i2c.h>
+#include <linux/ktime.h>
+#include <linux/delay.h>
+#include "pmbus.h"
+
+enum chips { zl2004, zl2005, zl2006, zl2008, zl2105, zl2106, zl6100, zl6105,
+ zl9101, zl9117 };
+
+struct zl6100_data {
+ int id;
+ ktime_t access; /* chip access time */
+ int delay; /* Delay between chip accesses in uS */
+ struct pmbus_driver_info info;
+};
+
+#define to_zl6100_data(x) container_of(x, struct zl6100_data, info)
+
+#define ZL6100_MFR_CONFIG 0xd0
+#define ZL6100_DEVICE_ID 0xe4
+
+#define ZL6100_MFR_XTEMP_ENABLE (1 << 7)
+
+#define MFR_VMON_OV_FAULT_LIMIT 0xf5
+#define MFR_VMON_UV_FAULT_LIMIT 0xf6
+#define MFR_READ_VMON 0xf7
+
+#define VMON_UV_WARNING (1 << 5)
+#define VMON_OV_WARNING (1 << 4)
+#define VMON_UV_FAULT (1 << 1)
+#define VMON_OV_FAULT (1 << 0)
+
+#define ZL6100_WAIT_TIME 1000 /* uS */
+
+static ushort delay = ZL6100_WAIT_TIME;
+module_param(delay, ushort, 0644);
+MODULE_PARM_DESC(delay, "Delay between chip accesses in uS");
+
+/* Convert linear sensor value to milli-units */
+static long zl6100_l2d(s16 l)
+{
+ s16 exponent;
+ s32 mantissa;
+ long val;
+
+ exponent = l >> 11;
+ mantissa = ((s16)((l & 0x7ff) << 5)) >> 5;
+
+ val = mantissa;
+
+ /* scale result to milli-units */
+ val = val * 1000L;
+
+ if (exponent >= 0)
+ val <<= exponent;
+ else
+ val >>= -exponent;
+
+ return val;
+}
+
+#define MAX_MANTISSA (1023 * 1000)
+#define MIN_MANTISSA (511 * 1000)
+
+static u16 zl6100_d2l(long val)
+{
+ s16 exponent = 0, mantissa;
+ bool negative = false;
+
+ /* simple case */
+ if (val == 0)
+ return 0;
+
+ if (val < 0) {
+ negative = true;
+ val = -val;
+ }
+
+ /* Reduce large mantissa until it fits into 10 bit */
+ while (val >= MAX_MANTISSA && exponent < 15) {
+ exponent++;
+ val >>= 1;
+ }
+ /* Increase small mantissa to improve precision */
+ while (val < MIN_MANTISSA && exponent > -15) {
+ exponent--;
+ val <<= 1;
+ }
+
+ /* Convert mantissa from milli-units to units */
+ mantissa = DIV_ROUND_CLOSEST(val, 1000);
+
+ /* Ensure that resulting number is within range */
+ if (mantissa > 0x3ff)
+ mantissa = 0x3ff;
+
+ /* restore sign */
+ if (negative)
+ mantissa = -mantissa;
+
+ /* Convert to 5 bit exponent, 11 bit mantissa */
+ return (mantissa & 0x7ff) | ((exponent << 11) & 0xf800);
+}
+
+/* Some chips need a delay between accesses */
+static inline void zl6100_wait(const struct zl6100_data *data)
+{
+ if (data->delay) {
+ s64 delta = ktime_us_delta(ktime_get(), data->access);
+ if (delta < data->delay)
+ udelay(data->delay - delta);
+ }
+}
+
+static int zl6100_read_word_data(struct i2c_client *client, int page, int reg)
+{
+ const struct pmbus_driver_info *info = pmbus_get_driver_info(client);
+ struct zl6100_data *data = to_zl6100_data(info);
+ int ret, vreg;
+
+ if (page > 0)
+ return -ENXIO;
+
+ if (data->id == zl2005) {
+ /*
+ * Limit register detection is not reliable on ZL2005.
+ * Make sure registers are not erroneously detected.
+ */
+ switch (reg) {
+ case PMBUS_VOUT_OV_WARN_LIMIT:
+ case PMBUS_VOUT_UV_WARN_LIMIT:
+ case PMBUS_IOUT_OC_WARN_LIMIT:
+ return -ENXIO;
+ }
+ }
+
+ switch (reg) {
+ case PMBUS_VIRT_READ_VMON:
+ vreg = MFR_READ_VMON;
+ break;
+ case PMBUS_VIRT_VMON_OV_WARN_LIMIT:
+ case PMBUS_VIRT_VMON_OV_FAULT_LIMIT:
+ vreg = MFR_VMON_OV_FAULT_LIMIT;
+ break;
+ case PMBUS_VIRT_VMON_UV_WARN_LIMIT:
+ case PMBUS_VIRT_VMON_UV_FAULT_LIMIT:
+ vreg = MFR_VMON_UV_FAULT_LIMIT;
+ break;
+ default:
+ if (reg >= PMBUS_VIRT_BASE)
+ return -ENXIO;
+ vreg = reg;
+ break;
+ }
+
+ zl6100_wait(data);
+ ret = pmbus_read_word_data(client, page, vreg);
+ data->access = ktime_get();
+ if (ret < 0)
+ return ret;
+
+ switch (reg) {
+ case PMBUS_VIRT_VMON_OV_WARN_LIMIT:
+ ret = zl6100_d2l(DIV_ROUND_CLOSEST(zl6100_l2d(ret) * 9, 10));
+ break;
+ case PMBUS_VIRT_VMON_UV_WARN_LIMIT:
+ ret = zl6100_d2l(DIV_ROUND_CLOSEST(zl6100_l2d(ret) * 11, 10));
+ break;
+ }
+
+ return ret;
+}
+
+static int zl6100_read_byte_data(struct i2c_client *client, int page, int reg)
+{
+ const struct pmbus_driver_info *info = pmbus_get_driver_info(client);
+ struct zl6100_data *data = to_zl6100_data(info);
+ int ret, status;
+
+ if (page > 0)
+ return -ENXIO;
+
+ zl6100_wait(data);
+
+ switch (reg) {
+ case PMBUS_VIRT_STATUS_VMON:
+ ret = pmbus_read_byte_data(client, 0,
+ PMBUS_STATUS_MFR_SPECIFIC);
+ if (ret < 0)
+ break;
+
+ status = 0;
+ if (ret & VMON_UV_WARNING)
+ status |= PB_VOLTAGE_UV_WARNING;
+ if (ret & VMON_OV_WARNING)
+ status |= PB_VOLTAGE_OV_WARNING;
+ if (ret & VMON_UV_FAULT)
+ status |= PB_VOLTAGE_UV_FAULT;
+ if (ret & VMON_OV_FAULT)
+ status |= PB_VOLTAGE_OV_FAULT;
+ ret = status;
+ break;
+ default:
+ ret = pmbus_read_byte_data(client, page, reg);
+ break;
+ }
+ data->access = ktime_get();
+
+ return ret;
+}
+
+static int zl6100_write_word_data(struct i2c_client *client, int page, int reg,
+ u16 word)
+{
+ const struct pmbus_driver_info *info = pmbus_get_driver_info(client);
+ struct zl6100_data *data = to_zl6100_data(info);
+ int ret, vreg;
+
+ if (page > 0)
+ return -ENXIO;
+
+ switch (reg) {
+ case PMBUS_VIRT_VMON_OV_WARN_LIMIT:
+ word = zl6100_d2l(DIV_ROUND_CLOSEST(zl6100_l2d(word) * 10, 9));
+ vreg = MFR_VMON_OV_FAULT_LIMIT;
+ pmbus_clear_cache(client);
+ break;
+ case PMBUS_VIRT_VMON_OV_FAULT_LIMIT:
+ vreg = MFR_VMON_OV_FAULT_LIMIT;
+ pmbus_clear_cache(client);
+ break;
+ case PMBUS_VIRT_VMON_UV_WARN_LIMIT:
+ word = zl6100_d2l(DIV_ROUND_CLOSEST(zl6100_l2d(word) * 10, 11));
+ vreg = MFR_VMON_UV_FAULT_LIMIT;
+ pmbus_clear_cache(client);
+ break;
+ case PMBUS_VIRT_VMON_UV_FAULT_LIMIT:
+ vreg = MFR_VMON_UV_FAULT_LIMIT;
+ pmbus_clear_cache(client);
+ break;
+ default:
+ if (reg >= PMBUS_VIRT_BASE)
+ return -ENXIO;
+ vreg = reg;
+ }
+
+ zl6100_wait(data);
+ ret = pmbus_write_word_data(client, page, vreg, word);
+ data->access = ktime_get();
+
+ return ret;
+}
+
+static int zl6100_write_byte(struct i2c_client *client, int page, u8 value)
+{
+ const struct pmbus_driver_info *info = pmbus_get_driver_info(client);
+ struct zl6100_data *data = to_zl6100_data(info);
+ int ret;
+
+ if (page > 0)
+ return -ENXIO;
+
+ zl6100_wait(data);
+ ret = pmbus_write_byte(client, page, value);
+ data->access = ktime_get();
+
+ return ret;
+}
+
+static const struct i2c_device_id zl6100_id[] = {
+ {"bmr450", zl2005},
+ {"bmr451", zl2005},
+ {"bmr462", zl2008},
+ {"bmr463", zl2008},
+ {"bmr464", zl2008},
+ {"zl2004", zl2004},
+ {"zl2005", zl2005},
+ {"zl2006", zl2006},
+ {"zl2008", zl2008},
+ {"zl2105", zl2105},
+ {"zl2106", zl2106},
+ {"zl6100", zl6100},
+ {"zl6105", zl6105},
+ {"zl9101", zl9101},
+ {"zl9117", zl9117},
+ { }
+};
+MODULE_DEVICE_TABLE(i2c, zl6100_id);
+
+static int zl6100_probe(struct i2c_client *client,
+ const struct i2c_device_id *id)
+{
+ int ret;
+ struct zl6100_data *data;
+ struct pmbus_driver_info *info;
+ u8 device_id[I2C_SMBUS_BLOCK_MAX + 1];
+ const struct i2c_device_id *mid;
+
+ if (!i2c_check_functionality(client->adapter,
+ I2C_FUNC_SMBUS_READ_WORD_DATA
+ | I2C_FUNC_SMBUS_READ_BLOCK_DATA))
+ return -ENODEV;
+
+ ret = i2c_smbus_read_block_data(client, ZL6100_DEVICE_ID,
+ device_id);
+ if (ret < 0) {
+ dev_err(&client->dev, "Failed to read device ID\n");
+ return ret;
+ }
+ device_id[ret] = '\0';
+ dev_info(&client->dev, "Device ID %s\n", device_id);
+
+ mid = NULL;
+ for (mid = zl6100_id; mid->name[0]; mid++) {
+ if (!strncasecmp(mid->name, device_id, strlen(mid->name)))
+ break;
+ }
+ if (!mid->name[0]) {
+ dev_err(&client->dev, "Unsupported device\n");
+ return -ENODEV;
+ }
+ if (id->driver_data != mid->driver_data)
+ dev_notice(&client->dev,
+ "Device mismatch: Configured %s, detected %s\n",
+ id->name, mid->name);
+
+ data = devm_kzalloc(&client->dev, sizeof(struct zl6100_data),
+ GFP_KERNEL);
+ if (!data)
+ return -ENOMEM;
+
+ data->id = mid->driver_data;
+
+ /*
+ * According to information from the chip vendor, all currently
+ * supported chips are known to require a wait time between I2C
+ * accesses.
+ */
+ data->delay = delay;
+
+ /*
+ * Since there was a direct I2C device access above, wait before
+ * accessing the chip again.
+ */
+ data->access = ktime_get();
+ zl6100_wait(data);
+
+ info = &data->info;
+
+ info->pages = 1;
+ info->func[0] = PMBUS_HAVE_VIN | PMBUS_HAVE_STATUS_INPUT
+ | PMBUS_HAVE_VOUT | PMBUS_HAVE_STATUS_VOUT
+ | PMBUS_HAVE_IOUT | PMBUS_HAVE_STATUS_IOUT
+ | PMBUS_HAVE_TEMP | PMBUS_HAVE_STATUS_TEMP;
+
+ /*
+ * ZL2004, ZL9101M, and ZL9117M support monitoring an extra voltage
+ * (VMON for ZL2004, VDRV for ZL9101M and ZL9117M). Report it as vmon.
+ */
+ if (data->id == zl2004 || data->id == zl9101 || data->id == zl9117)
+ info->func[0] |= PMBUS_HAVE_VMON | PMBUS_HAVE_STATUS_VMON;
+
+ ret = i2c_smbus_read_word_data(client, ZL6100_MFR_CONFIG);
+ if (ret < 0)
+ return ret;
+
+ if (ret & ZL6100_MFR_XTEMP_ENABLE)
+ info->func[0] |= PMBUS_HAVE_TEMP2;
+
+ data->access = ktime_get();
+ zl6100_wait(data);
+
+ info->read_word_data = zl6100_read_word_data;
+ info->read_byte_data = zl6100_read_byte_data;
+ info->write_word_data = zl6100_write_word_data;
+ info->write_byte = zl6100_write_byte;
+
+ return pmbus_do_probe(client, mid, info);
+}
+
+static struct i2c_driver zl6100_driver = {
+ .driver = {
+ .name = "zl6100",
+ },
+ .probe = zl6100_probe,
+ .remove = pmbus_do_remove,
+ .id_table = zl6100_id,
+};
+
+module_i2c_driver(zl6100_driver);
+
+MODULE_AUTHOR("Guenter Roeck");
+MODULE_DESCRIPTION("PMBus driver for ZL6100 and compatibles");
+MODULE_LICENSE("GPL");