summaryrefslogtreecommitdiff
path: root/drivers/hwmon/vt8231.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/hwmon/vt8231.c')
-rw-r--r--drivers/hwmon/vt8231.c1070
1 files changed, 1070 insertions, 0 deletions
diff --git a/drivers/hwmon/vt8231.c b/drivers/hwmon/vt8231.c
new file mode 100644
index 000000000..cb69a8c2e
--- /dev/null
+++ b/drivers/hwmon/vt8231.c
@@ -0,0 +1,1070 @@
+/*
+ * vt8231.c - Part of lm_sensors, Linux kernel modules
+ * for hardware monitoring
+ *
+ * Copyright (c) 2005 Roger Lucas <vt8231@hiddenengine.co.uk>
+ * Copyright (c) 2002 Mark D. Studebaker <mdsxyz123@yahoo.com>
+ * Aaron M. Marsh <amarsh@sdf.lonestar.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+/*
+ * Supports VIA VT8231 South Bridge embedded sensors
+ */
+
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/slab.h>
+#include <linux/pci.h>
+#include <linux/jiffies.h>
+#include <linux/platform_device.h>
+#include <linux/hwmon.h>
+#include <linux/hwmon-sysfs.h>
+#include <linux/hwmon-vid.h>
+#include <linux/err.h>
+#include <linux/mutex.h>
+#include <linux/acpi.h>
+#include <linux/io.h>
+
+static int force_addr;
+module_param(force_addr, int, 0);
+MODULE_PARM_DESC(force_addr, "Initialize the base address of the sensors");
+
+static struct platform_device *pdev;
+
+#define VT8231_EXTENT 0x80
+#define VT8231_BASE_REG 0x70
+#define VT8231_ENABLE_REG 0x74
+
+/*
+ * The VT8231 registers
+ *
+ * The reset value for the input channel configuration is used (Reg 0x4A=0x07)
+ * which sets the selected inputs marked with '*' below if multiple options are
+ * possible:
+ *
+ * Voltage Mode Temperature Mode
+ * Sensor Linux Id Linux Id VIA Id
+ * -------- -------- -------- ------
+ * CPU Diode N/A temp1 0
+ * UIC1 in0 temp2 * 1
+ * UIC2 in1 * temp3 2
+ * UIC3 in2 * temp4 3
+ * UIC4 in3 * temp5 4
+ * UIC5 in4 * temp6 5
+ * 3.3V in5 N/A
+ *
+ * Note that the BIOS may set the configuration register to a different value
+ * to match the motherboard configuration.
+ */
+
+/* fans numbered 0-1 */
+#define VT8231_REG_FAN_MIN(nr) (0x3b + (nr))
+#define VT8231_REG_FAN(nr) (0x29 + (nr))
+
+/* Voltage inputs numbered 0-5 */
+
+static const u8 regvolt[] = { 0x21, 0x22, 0x23, 0x24, 0x25, 0x26 };
+static const u8 regvoltmax[] = { 0x3d, 0x2b, 0x2d, 0x2f, 0x31, 0x33 };
+static const u8 regvoltmin[] = { 0x3e, 0x2c, 0x2e, 0x30, 0x32, 0x34 };
+
+/*
+ * Temperatures are numbered 1-6 according to the Linux kernel specification.
+ *
+ * In the VIA datasheet, however, the temperatures are numbered from zero.
+ * Since it is important that this driver can easily be compared to the VIA
+ * datasheet, we will use the VIA numbering within this driver and map the
+ * kernel sysfs device name to the VIA number in the sysfs callback.
+ */
+
+#define VT8231_REG_TEMP_LOW01 0x49
+#define VT8231_REG_TEMP_LOW25 0x4d
+
+static const u8 regtemp[] = { 0x1f, 0x21, 0x22, 0x23, 0x24, 0x25 };
+static const u8 regtempmax[] = { 0x39, 0x3d, 0x2b, 0x2d, 0x2f, 0x31 };
+static const u8 regtempmin[] = { 0x3a, 0x3e, 0x2c, 0x2e, 0x30, 0x32 };
+
+#define TEMP_FROM_REG(reg) (((253 * 4 - (reg)) * 550 + 105) / 210)
+#define TEMP_MAXMIN_FROM_REG(reg) (((253 - (reg)) * 2200 + 105) / 210)
+#define TEMP_MAXMIN_TO_REG(val) (253 - ((val) * 210 + 1100) / 2200)
+
+#define VT8231_REG_CONFIG 0x40
+#define VT8231_REG_ALARM1 0x41
+#define VT8231_REG_ALARM2 0x42
+#define VT8231_REG_FANDIV 0x47
+#define VT8231_REG_UCH_CONFIG 0x4a
+#define VT8231_REG_TEMP1_CONFIG 0x4b
+#define VT8231_REG_TEMP2_CONFIG 0x4c
+
+/*
+ * temps 0-5 as numbered in VIA datasheet - see later for mapping to Linux
+ * numbering
+ */
+#define ISTEMP(i, ch_config) ((i) == 0 ? 1 : \
+ ((ch_config) >> ((i)+1)) & 0x01)
+/* voltages 0-5 */
+#define ISVOLT(i, ch_config) ((i) == 5 ? 1 : \
+ !(((ch_config) >> ((i)+2)) & 0x01))
+
+#define DIV_FROM_REG(val) (1 << (val))
+
+/*
+ * NB The values returned here are NOT temperatures. The calibration curves
+ * for the thermistor curves are board-specific and must go in the
+ * sensors.conf file. Temperature sensors are actually ten bits, but the
+ * VIA datasheet only considers the 8 MSBs obtained from the regtemp[]
+ * register. The temperature value returned should have a magnitude of 3,
+ * so we use the VIA scaling as the "true" scaling and use the remaining 2
+ * LSBs as fractional precision.
+ *
+ * All the on-chip hardware temperature comparisons for the alarms are only
+ * 8-bits wide, and compare against the 8 MSBs of the temperature. The bits
+ * in the registers VT8231_REG_TEMP_LOW01 and VT8231_REG_TEMP_LOW25 are
+ * ignored.
+ */
+
+/*
+ ****** FAN RPM CONVERSIONS ********
+ * This chip saturates back at 0, not at 255 like many the other chips.
+ * So, 0 means 0 RPM
+ */
+static inline u8 FAN_TO_REG(long rpm, int div)
+{
+ if (rpm <= 0 || rpm > 1310720)
+ return 0;
+ return clamp_val(1310720 / (rpm * div), 1, 255);
+}
+
+#define FAN_FROM_REG(val, div) ((val) == 0 ? 0 : 1310720 / ((val) * (div)))
+
+struct vt8231_data {
+ unsigned short addr;
+ const char *name;
+
+ struct mutex update_lock;
+ struct device *hwmon_dev;
+ char valid; /* !=0 if following fields are valid */
+ unsigned long last_updated; /* In jiffies */
+
+ u8 in[6]; /* Register value */
+ u8 in_max[6]; /* Register value */
+ u8 in_min[6]; /* Register value */
+ u16 temp[6]; /* Register value 10 bit, right aligned */
+ u8 temp_max[6]; /* Register value */
+ u8 temp_min[6]; /* Register value */
+ u8 fan[2]; /* Register value */
+ u8 fan_min[2]; /* Register value */
+ u8 fan_div[2]; /* Register encoding, shifted right */
+ u16 alarms; /* Register encoding */
+ u8 uch_config;
+};
+
+static struct pci_dev *s_bridge;
+static int vt8231_probe(struct platform_device *pdev);
+static int vt8231_remove(struct platform_device *pdev);
+static struct vt8231_data *vt8231_update_device(struct device *dev);
+static void vt8231_init_device(struct vt8231_data *data);
+
+static inline int vt8231_read_value(struct vt8231_data *data, u8 reg)
+{
+ return inb_p(data->addr + reg);
+}
+
+static inline void vt8231_write_value(struct vt8231_data *data, u8 reg,
+ u8 value)
+{
+ outb_p(value, data->addr + reg);
+}
+
+/* following are the sysfs callback functions */
+static ssize_t show_in(struct device *dev, struct device_attribute *attr,
+ char *buf)
+{
+ struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr);
+ int nr = sensor_attr->index;
+ struct vt8231_data *data = vt8231_update_device(dev);
+
+ return sprintf(buf, "%d\n", ((data->in[nr] - 3) * 10000) / 958);
+}
+
+static ssize_t show_in_min(struct device *dev, struct device_attribute *attr,
+ char *buf)
+{
+ struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr);
+ int nr = sensor_attr->index;
+ struct vt8231_data *data = vt8231_update_device(dev);
+
+ return sprintf(buf, "%d\n", ((data->in_min[nr] - 3) * 10000) / 958);
+}
+
+static ssize_t show_in_max(struct device *dev, struct device_attribute *attr,
+ char *buf)
+{
+ struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr);
+ int nr = sensor_attr->index;
+ struct vt8231_data *data = vt8231_update_device(dev);
+
+ return sprintf(buf, "%d\n", (((data->in_max[nr] - 3) * 10000) / 958));
+}
+
+static ssize_t set_in_min(struct device *dev, struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr);
+ int nr = sensor_attr->index;
+ struct vt8231_data *data = dev_get_drvdata(dev);
+ unsigned long val;
+ int err;
+
+ err = kstrtoul(buf, 10, &val);
+ if (err)
+ return err;
+
+ mutex_lock(&data->update_lock);
+ data->in_min[nr] = clamp_val(((val * 958) / 10000) + 3, 0, 255);
+ vt8231_write_value(data, regvoltmin[nr], data->in_min[nr]);
+ mutex_unlock(&data->update_lock);
+ return count;
+}
+
+static ssize_t set_in_max(struct device *dev, struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr);
+ int nr = sensor_attr->index;
+ struct vt8231_data *data = dev_get_drvdata(dev);
+ unsigned long val;
+ int err;
+
+ err = kstrtoul(buf, 10, &val);
+ if (err)
+ return err;
+
+ mutex_lock(&data->update_lock);
+ data->in_max[nr] = clamp_val(((val * 958) / 10000) + 3, 0, 255);
+ vt8231_write_value(data, regvoltmax[nr], data->in_max[nr]);
+ mutex_unlock(&data->update_lock);
+ return count;
+}
+
+/* Special case for input 5 as this has 3.3V scaling built into the chip */
+static ssize_t show_in5(struct device *dev, struct device_attribute *attr,
+ char *buf)
+{
+ struct vt8231_data *data = vt8231_update_device(dev);
+
+ return sprintf(buf, "%d\n",
+ (((data->in[5] - 3) * 10000 * 54) / (958 * 34)));
+}
+
+static ssize_t show_in5_min(struct device *dev, struct device_attribute *attr,
+ char *buf)
+{
+ struct vt8231_data *data = vt8231_update_device(dev);
+
+ return sprintf(buf, "%d\n",
+ (((data->in_min[5] - 3) * 10000 * 54) / (958 * 34)));
+}
+
+static ssize_t show_in5_max(struct device *dev, struct device_attribute *attr,
+ char *buf)
+{
+ struct vt8231_data *data = vt8231_update_device(dev);
+
+ return sprintf(buf, "%d\n",
+ (((data->in_max[5] - 3) * 10000 * 54) / (958 * 34)));
+}
+
+static ssize_t set_in5_min(struct device *dev, struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ struct vt8231_data *data = dev_get_drvdata(dev);
+ unsigned long val;
+ int err;
+
+ err = kstrtoul(buf, 10, &val);
+ if (err)
+ return err;
+
+ mutex_lock(&data->update_lock);
+ data->in_min[5] = clamp_val(((val * 958 * 34) / (10000 * 54)) + 3,
+ 0, 255);
+ vt8231_write_value(data, regvoltmin[5], data->in_min[5]);
+ mutex_unlock(&data->update_lock);
+ return count;
+}
+
+static ssize_t set_in5_max(struct device *dev, struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ struct vt8231_data *data = dev_get_drvdata(dev);
+ unsigned long val;
+ int err;
+
+ err = kstrtoul(buf, 10, &val);
+ if (err)
+ return err;
+
+ mutex_lock(&data->update_lock);
+ data->in_max[5] = clamp_val(((val * 958 * 34) / (10000 * 54)) + 3,
+ 0, 255);
+ vt8231_write_value(data, regvoltmax[5], data->in_max[5]);
+ mutex_unlock(&data->update_lock);
+ return count;
+}
+
+#define define_voltage_sysfs(offset) \
+static SENSOR_DEVICE_ATTR(in##offset##_input, S_IRUGO, \
+ show_in, NULL, offset); \
+static SENSOR_DEVICE_ATTR(in##offset##_min, S_IRUGO | S_IWUSR, \
+ show_in_min, set_in_min, offset); \
+static SENSOR_DEVICE_ATTR(in##offset##_max, S_IRUGO | S_IWUSR, \
+ show_in_max, set_in_max, offset)
+
+define_voltage_sysfs(0);
+define_voltage_sysfs(1);
+define_voltage_sysfs(2);
+define_voltage_sysfs(3);
+define_voltage_sysfs(4);
+
+static DEVICE_ATTR(in5_input, S_IRUGO, show_in5, NULL);
+static DEVICE_ATTR(in5_min, S_IRUGO | S_IWUSR, show_in5_min, set_in5_min);
+static DEVICE_ATTR(in5_max, S_IRUGO | S_IWUSR, show_in5_max, set_in5_max);
+
+/* Temperatures */
+static ssize_t show_temp0(struct device *dev, struct device_attribute *attr,
+ char *buf)
+{
+ struct vt8231_data *data = vt8231_update_device(dev);
+ return sprintf(buf, "%d\n", data->temp[0] * 250);
+}
+
+static ssize_t show_temp0_max(struct device *dev, struct device_attribute *attr,
+ char *buf)
+{
+ struct vt8231_data *data = vt8231_update_device(dev);
+ return sprintf(buf, "%d\n", data->temp_max[0] * 1000);
+}
+
+static ssize_t show_temp0_min(struct device *dev, struct device_attribute *attr,
+ char *buf)
+{
+ struct vt8231_data *data = vt8231_update_device(dev);
+ return sprintf(buf, "%d\n", data->temp_min[0] * 1000);
+}
+
+static ssize_t set_temp0_max(struct device *dev, struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ struct vt8231_data *data = dev_get_drvdata(dev);
+ long val;
+ int err;
+
+ err = kstrtol(buf, 10, &val);
+ if (err)
+ return err;
+
+ mutex_lock(&data->update_lock);
+ data->temp_max[0] = clamp_val((val + 500) / 1000, 0, 255);
+ vt8231_write_value(data, regtempmax[0], data->temp_max[0]);
+ mutex_unlock(&data->update_lock);
+ return count;
+}
+static ssize_t set_temp0_min(struct device *dev, struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ struct vt8231_data *data = dev_get_drvdata(dev);
+ long val;
+ int err;
+
+ err = kstrtol(buf, 10, &val);
+ if (err)
+ return err;
+
+ mutex_lock(&data->update_lock);
+ data->temp_min[0] = clamp_val((val + 500) / 1000, 0, 255);
+ vt8231_write_value(data, regtempmin[0], data->temp_min[0]);
+ mutex_unlock(&data->update_lock);
+ return count;
+}
+
+static ssize_t show_temp(struct device *dev, struct device_attribute *attr,
+ char *buf)
+{
+ struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr);
+ int nr = sensor_attr->index;
+ struct vt8231_data *data = vt8231_update_device(dev);
+ return sprintf(buf, "%d\n", TEMP_FROM_REG(data->temp[nr]));
+}
+
+static ssize_t show_temp_max(struct device *dev, struct device_attribute *attr,
+ char *buf)
+{
+ struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr);
+ int nr = sensor_attr->index;
+ struct vt8231_data *data = vt8231_update_device(dev);
+ return sprintf(buf, "%d\n", TEMP_MAXMIN_FROM_REG(data->temp_max[nr]));
+}
+
+static ssize_t show_temp_min(struct device *dev, struct device_attribute *attr,
+ char *buf)
+{
+ struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr);
+ int nr = sensor_attr->index;
+ struct vt8231_data *data = vt8231_update_device(dev);
+ return sprintf(buf, "%d\n", TEMP_MAXMIN_FROM_REG(data->temp_min[nr]));
+}
+
+static ssize_t set_temp_max(struct device *dev, struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr);
+ int nr = sensor_attr->index;
+ struct vt8231_data *data = dev_get_drvdata(dev);
+ long val;
+ int err;
+
+ err = kstrtol(buf, 10, &val);
+ if (err)
+ return err;
+
+ mutex_lock(&data->update_lock);
+ data->temp_max[nr] = clamp_val(TEMP_MAXMIN_TO_REG(val), 0, 255);
+ vt8231_write_value(data, regtempmax[nr], data->temp_max[nr]);
+ mutex_unlock(&data->update_lock);
+ return count;
+}
+static ssize_t set_temp_min(struct device *dev, struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr);
+ int nr = sensor_attr->index;
+ struct vt8231_data *data = dev_get_drvdata(dev);
+ long val;
+ int err;
+
+ err = kstrtol(buf, 10, &val);
+ if (err)
+ return err;
+
+ mutex_lock(&data->update_lock);
+ data->temp_min[nr] = clamp_val(TEMP_MAXMIN_TO_REG(val), 0, 255);
+ vt8231_write_value(data, regtempmin[nr], data->temp_min[nr]);
+ mutex_unlock(&data->update_lock);
+ return count;
+}
+
+/*
+ * Note that these map the Linux temperature sensor numbering (1-6) to the VIA
+ * temperature sensor numbering (0-5)
+ */
+#define define_temperature_sysfs(offset) \
+static SENSOR_DEVICE_ATTR(temp##offset##_input, S_IRUGO, \
+ show_temp, NULL, offset - 1); \
+static SENSOR_DEVICE_ATTR(temp##offset##_max, S_IRUGO | S_IWUSR, \
+ show_temp_max, set_temp_max, offset - 1); \
+static SENSOR_DEVICE_ATTR(temp##offset##_max_hyst, S_IRUGO | S_IWUSR, \
+ show_temp_min, set_temp_min, offset - 1)
+
+static DEVICE_ATTR(temp1_input, S_IRUGO, show_temp0, NULL);
+static DEVICE_ATTR(temp1_max, S_IRUGO | S_IWUSR, show_temp0_max, set_temp0_max);
+static DEVICE_ATTR(temp1_max_hyst, S_IRUGO | S_IWUSR, show_temp0_min,
+ set_temp0_min);
+
+define_temperature_sysfs(2);
+define_temperature_sysfs(3);
+define_temperature_sysfs(4);
+define_temperature_sysfs(5);
+define_temperature_sysfs(6);
+
+/* Fans */
+static ssize_t show_fan(struct device *dev, struct device_attribute *attr,
+ char *buf)
+{
+ struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr);
+ int nr = sensor_attr->index;
+ struct vt8231_data *data = vt8231_update_device(dev);
+ return sprintf(buf, "%d\n", FAN_FROM_REG(data->fan[nr],
+ DIV_FROM_REG(data->fan_div[nr])));
+}
+
+static ssize_t show_fan_min(struct device *dev, struct device_attribute *attr,
+ char *buf)
+{
+ struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr);
+ int nr = sensor_attr->index;
+ struct vt8231_data *data = vt8231_update_device(dev);
+ return sprintf(buf, "%d\n", FAN_FROM_REG(data->fan_min[nr],
+ DIV_FROM_REG(data->fan_div[nr])));
+}
+
+static ssize_t show_fan_div(struct device *dev, struct device_attribute *attr,
+ char *buf)
+{
+ struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr);
+ int nr = sensor_attr->index;
+ struct vt8231_data *data = vt8231_update_device(dev);
+ return sprintf(buf, "%d\n", DIV_FROM_REG(data->fan_div[nr]));
+}
+
+static ssize_t set_fan_min(struct device *dev, struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr);
+ int nr = sensor_attr->index;
+ struct vt8231_data *data = dev_get_drvdata(dev);
+ unsigned long val;
+ int err;
+
+ err = kstrtoul(buf, 10, &val);
+ if (err)
+ return err;
+
+ mutex_lock(&data->update_lock);
+ data->fan_min[nr] = FAN_TO_REG(val, DIV_FROM_REG(data->fan_div[nr]));
+ vt8231_write_value(data, VT8231_REG_FAN_MIN(nr), data->fan_min[nr]);
+ mutex_unlock(&data->update_lock);
+ return count;
+}
+
+static ssize_t set_fan_div(struct device *dev, struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ struct vt8231_data *data = dev_get_drvdata(dev);
+ struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr);
+ unsigned long val;
+ int nr = sensor_attr->index;
+ int old = vt8231_read_value(data, VT8231_REG_FANDIV);
+ long min = FAN_FROM_REG(data->fan_min[nr],
+ DIV_FROM_REG(data->fan_div[nr]));
+ int err;
+
+ err = kstrtoul(buf, 10, &val);
+ if (err)
+ return err;
+
+ mutex_lock(&data->update_lock);
+ switch (val) {
+ case 1:
+ data->fan_div[nr] = 0;
+ break;
+ case 2:
+ data->fan_div[nr] = 1;
+ break;
+ case 4:
+ data->fan_div[nr] = 2;
+ break;
+ case 8:
+ data->fan_div[nr] = 3;
+ break;
+ default:
+ dev_err(dev,
+ "fan_div value %ld not supported. Choose one of 1, 2, 4 or 8!\n",
+ val);
+ mutex_unlock(&data->update_lock);
+ return -EINVAL;
+ }
+
+ /* Correct the fan minimum speed */
+ data->fan_min[nr] = FAN_TO_REG(min, DIV_FROM_REG(data->fan_div[nr]));
+ vt8231_write_value(data, VT8231_REG_FAN_MIN(nr), data->fan_min[nr]);
+
+ old = (old & 0x0f) | (data->fan_div[1] << 6) | (data->fan_div[0] << 4);
+ vt8231_write_value(data, VT8231_REG_FANDIV, old);
+ mutex_unlock(&data->update_lock);
+ return count;
+}
+
+
+#define define_fan_sysfs(offset) \
+static SENSOR_DEVICE_ATTR(fan##offset##_input, S_IRUGO, \
+ show_fan, NULL, offset - 1); \
+static SENSOR_DEVICE_ATTR(fan##offset##_div, S_IRUGO | S_IWUSR, \
+ show_fan_div, set_fan_div, offset - 1); \
+static SENSOR_DEVICE_ATTR(fan##offset##_min, S_IRUGO | S_IWUSR, \
+ show_fan_min, set_fan_min, offset - 1)
+
+define_fan_sysfs(1);
+define_fan_sysfs(2);
+
+/* Alarms */
+static ssize_t show_alarms(struct device *dev, struct device_attribute *attr,
+ char *buf)
+{
+ struct vt8231_data *data = vt8231_update_device(dev);
+ return sprintf(buf, "%d\n", data->alarms);
+}
+static DEVICE_ATTR(alarms, S_IRUGO, show_alarms, NULL);
+
+static ssize_t show_alarm(struct device *dev, struct device_attribute *attr,
+ char *buf)
+{
+ int bitnr = to_sensor_dev_attr(attr)->index;
+ struct vt8231_data *data = vt8231_update_device(dev);
+ return sprintf(buf, "%u\n", (data->alarms >> bitnr) & 1);
+}
+static SENSOR_DEVICE_ATTR(temp1_alarm, S_IRUGO, show_alarm, NULL, 4);
+static SENSOR_DEVICE_ATTR(temp2_alarm, S_IRUGO, show_alarm, NULL, 11);
+static SENSOR_DEVICE_ATTR(temp3_alarm, S_IRUGO, show_alarm, NULL, 0);
+static SENSOR_DEVICE_ATTR(temp4_alarm, S_IRUGO, show_alarm, NULL, 1);
+static SENSOR_DEVICE_ATTR(temp5_alarm, S_IRUGO, show_alarm, NULL, 3);
+static SENSOR_DEVICE_ATTR(temp6_alarm, S_IRUGO, show_alarm, NULL, 8);
+static SENSOR_DEVICE_ATTR(in0_alarm, S_IRUGO, show_alarm, NULL, 11);
+static SENSOR_DEVICE_ATTR(in1_alarm, S_IRUGO, show_alarm, NULL, 0);
+static SENSOR_DEVICE_ATTR(in2_alarm, S_IRUGO, show_alarm, NULL, 1);
+static SENSOR_DEVICE_ATTR(in3_alarm, S_IRUGO, show_alarm, NULL, 3);
+static SENSOR_DEVICE_ATTR(in4_alarm, S_IRUGO, show_alarm, NULL, 8);
+static SENSOR_DEVICE_ATTR(in5_alarm, S_IRUGO, show_alarm, NULL, 2);
+static SENSOR_DEVICE_ATTR(fan1_alarm, S_IRUGO, show_alarm, NULL, 6);
+static SENSOR_DEVICE_ATTR(fan2_alarm, S_IRUGO, show_alarm, NULL, 7);
+
+static ssize_t show_name(struct device *dev, struct device_attribute
+ *devattr, char *buf)
+{
+ struct vt8231_data *data = dev_get_drvdata(dev);
+ return sprintf(buf, "%s\n", data->name);
+}
+static DEVICE_ATTR(name, S_IRUGO, show_name, NULL);
+
+static struct attribute *vt8231_attributes_temps[6][5] = {
+ {
+ &dev_attr_temp1_input.attr,
+ &dev_attr_temp1_max_hyst.attr,
+ &dev_attr_temp1_max.attr,
+ &sensor_dev_attr_temp1_alarm.dev_attr.attr,
+ NULL
+ }, {
+ &sensor_dev_attr_temp2_input.dev_attr.attr,
+ &sensor_dev_attr_temp2_max_hyst.dev_attr.attr,
+ &sensor_dev_attr_temp2_max.dev_attr.attr,
+ &sensor_dev_attr_temp2_alarm.dev_attr.attr,
+ NULL
+ }, {
+ &sensor_dev_attr_temp3_input.dev_attr.attr,
+ &sensor_dev_attr_temp3_max_hyst.dev_attr.attr,
+ &sensor_dev_attr_temp3_max.dev_attr.attr,
+ &sensor_dev_attr_temp3_alarm.dev_attr.attr,
+ NULL
+ }, {
+ &sensor_dev_attr_temp4_input.dev_attr.attr,
+ &sensor_dev_attr_temp4_max_hyst.dev_attr.attr,
+ &sensor_dev_attr_temp4_max.dev_attr.attr,
+ &sensor_dev_attr_temp4_alarm.dev_attr.attr,
+ NULL
+ }, {
+ &sensor_dev_attr_temp5_input.dev_attr.attr,
+ &sensor_dev_attr_temp5_max_hyst.dev_attr.attr,
+ &sensor_dev_attr_temp5_max.dev_attr.attr,
+ &sensor_dev_attr_temp5_alarm.dev_attr.attr,
+ NULL
+ }, {
+ &sensor_dev_attr_temp6_input.dev_attr.attr,
+ &sensor_dev_attr_temp6_max_hyst.dev_attr.attr,
+ &sensor_dev_attr_temp6_max.dev_attr.attr,
+ &sensor_dev_attr_temp6_alarm.dev_attr.attr,
+ NULL
+ }
+};
+
+static const struct attribute_group vt8231_group_temps[6] = {
+ { .attrs = vt8231_attributes_temps[0] },
+ { .attrs = vt8231_attributes_temps[1] },
+ { .attrs = vt8231_attributes_temps[2] },
+ { .attrs = vt8231_attributes_temps[3] },
+ { .attrs = vt8231_attributes_temps[4] },
+ { .attrs = vt8231_attributes_temps[5] },
+};
+
+static struct attribute *vt8231_attributes_volts[6][5] = {
+ {
+ &sensor_dev_attr_in0_input.dev_attr.attr,
+ &sensor_dev_attr_in0_min.dev_attr.attr,
+ &sensor_dev_attr_in0_max.dev_attr.attr,
+ &sensor_dev_attr_in0_alarm.dev_attr.attr,
+ NULL
+ }, {
+ &sensor_dev_attr_in1_input.dev_attr.attr,
+ &sensor_dev_attr_in1_min.dev_attr.attr,
+ &sensor_dev_attr_in1_max.dev_attr.attr,
+ &sensor_dev_attr_in1_alarm.dev_attr.attr,
+ NULL
+ }, {
+ &sensor_dev_attr_in2_input.dev_attr.attr,
+ &sensor_dev_attr_in2_min.dev_attr.attr,
+ &sensor_dev_attr_in2_max.dev_attr.attr,
+ &sensor_dev_attr_in2_alarm.dev_attr.attr,
+ NULL
+ }, {
+ &sensor_dev_attr_in3_input.dev_attr.attr,
+ &sensor_dev_attr_in3_min.dev_attr.attr,
+ &sensor_dev_attr_in3_max.dev_attr.attr,
+ &sensor_dev_attr_in3_alarm.dev_attr.attr,
+ NULL
+ }, {
+ &sensor_dev_attr_in4_input.dev_attr.attr,
+ &sensor_dev_attr_in4_min.dev_attr.attr,
+ &sensor_dev_attr_in4_max.dev_attr.attr,
+ &sensor_dev_attr_in4_alarm.dev_attr.attr,
+ NULL
+ }, {
+ &dev_attr_in5_input.attr,
+ &dev_attr_in5_min.attr,
+ &dev_attr_in5_max.attr,
+ &sensor_dev_attr_in5_alarm.dev_attr.attr,
+ NULL
+ }
+};
+
+static const struct attribute_group vt8231_group_volts[6] = {
+ { .attrs = vt8231_attributes_volts[0] },
+ { .attrs = vt8231_attributes_volts[1] },
+ { .attrs = vt8231_attributes_volts[2] },
+ { .attrs = vt8231_attributes_volts[3] },
+ { .attrs = vt8231_attributes_volts[4] },
+ { .attrs = vt8231_attributes_volts[5] },
+};
+
+static struct attribute *vt8231_attributes[] = {
+ &sensor_dev_attr_fan1_input.dev_attr.attr,
+ &sensor_dev_attr_fan2_input.dev_attr.attr,
+ &sensor_dev_attr_fan1_min.dev_attr.attr,
+ &sensor_dev_attr_fan2_min.dev_attr.attr,
+ &sensor_dev_attr_fan1_div.dev_attr.attr,
+ &sensor_dev_attr_fan2_div.dev_attr.attr,
+ &sensor_dev_attr_fan1_alarm.dev_attr.attr,
+ &sensor_dev_attr_fan2_alarm.dev_attr.attr,
+ &dev_attr_alarms.attr,
+ &dev_attr_name.attr,
+ NULL
+};
+
+static const struct attribute_group vt8231_group = {
+ .attrs = vt8231_attributes,
+};
+
+static struct platform_driver vt8231_driver = {
+ .driver = {
+ .name = "vt8231",
+ },
+ .probe = vt8231_probe,
+ .remove = vt8231_remove,
+};
+
+static const struct pci_device_id vt8231_pci_ids[] = {
+ { PCI_DEVICE(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8231_4) },
+ { 0, }
+};
+
+MODULE_DEVICE_TABLE(pci, vt8231_pci_ids);
+
+static int vt8231_pci_probe(struct pci_dev *dev,
+ const struct pci_device_id *id);
+
+static struct pci_driver vt8231_pci_driver = {
+ .name = "vt8231",
+ .id_table = vt8231_pci_ids,
+ .probe = vt8231_pci_probe,
+};
+
+static int vt8231_probe(struct platform_device *pdev)
+{
+ struct resource *res;
+ struct vt8231_data *data;
+ int err = 0, i;
+
+ /* Reserve the ISA region */
+ res = platform_get_resource(pdev, IORESOURCE_IO, 0);
+ if (!devm_request_region(&pdev->dev, res->start, VT8231_EXTENT,
+ vt8231_driver.driver.name)) {
+ dev_err(&pdev->dev, "Region 0x%lx-0x%lx already in use!\n",
+ (unsigned long)res->start, (unsigned long)res->end);
+ return -ENODEV;
+ }
+
+ data = devm_kzalloc(&pdev->dev, sizeof(struct vt8231_data), GFP_KERNEL);
+ if (!data)
+ return -ENOMEM;
+
+ platform_set_drvdata(pdev, data);
+ data->addr = res->start;
+ data->name = "vt8231";
+
+ mutex_init(&data->update_lock);
+ vt8231_init_device(data);
+
+ /* Register sysfs hooks */
+ err = sysfs_create_group(&pdev->dev.kobj, &vt8231_group);
+ if (err)
+ return err;
+
+ /* Must update device information to find out the config field */
+ data->uch_config = vt8231_read_value(data, VT8231_REG_UCH_CONFIG);
+
+ for (i = 0; i < ARRAY_SIZE(vt8231_group_temps); i++) {
+ if (ISTEMP(i, data->uch_config)) {
+ err = sysfs_create_group(&pdev->dev.kobj,
+ &vt8231_group_temps[i]);
+ if (err)
+ goto exit_remove_files;
+ }
+ }
+
+ for (i = 0; i < ARRAY_SIZE(vt8231_group_volts); i++) {
+ if (ISVOLT(i, data->uch_config)) {
+ err = sysfs_create_group(&pdev->dev.kobj,
+ &vt8231_group_volts[i]);
+ if (err)
+ goto exit_remove_files;
+ }
+ }
+
+ data->hwmon_dev = hwmon_device_register(&pdev->dev);
+ if (IS_ERR(data->hwmon_dev)) {
+ err = PTR_ERR(data->hwmon_dev);
+ goto exit_remove_files;
+ }
+ return 0;
+
+exit_remove_files:
+ for (i = 0; i < ARRAY_SIZE(vt8231_group_volts); i++)
+ sysfs_remove_group(&pdev->dev.kobj, &vt8231_group_volts[i]);
+
+ for (i = 0; i < ARRAY_SIZE(vt8231_group_temps); i++)
+ sysfs_remove_group(&pdev->dev.kobj, &vt8231_group_temps[i]);
+
+ sysfs_remove_group(&pdev->dev.kobj, &vt8231_group);
+ return err;
+}
+
+static int vt8231_remove(struct platform_device *pdev)
+{
+ struct vt8231_data *data = platform_get_drvdata(pdev);
+ int i;
+
+ hwmon_device_unregister(data->hwmon_dev);
+
+ for (i = 0; i < ARRAY_SIZE(vt8231_group_volts); i++)
+ sysfs_remove_group(&pdev->dev.kobj, &vt8231_group_volts[i]);
+
+ for (i = 0; i < ARRAY_SIZE(vt8231_group_temps); i++)
+ sysfs_remove_group(&pdev->dev.kobj, &vt8231_group_temps[i]);
+
+ sysfs_remove_group(&pdev->dev.kobj, &vt8231_group);
+
+ return 0;
+}
+
+static void vt8231_init_device(struct vt8231_data *data)
+{
+ vt8231_write_value(data, VT8231_REG_TEMP1_CONFIG, 0);
+ vt8231_write_value(data, VT8231_REG_TEMP2_CONFIG, 0);
+}
+
+static struct vt8231_data *vt8231_update_device(struct device *dev)
+{
+ struct vt8231_data *data = dev_get_drvdata(dev);
+ int i;
+ u16 low;
+
+ mutex_lock(&data->update_lock);
+
+ if (time_after(jiffies, data->last_updated + HZ + HZ / 2)
+ || !data->valid) {
+ for (i = 0; i < 6; i++) {
+ if (ISVOLT(i, data->uch_config)) {
+ data->in[i] = vt8231_read_value(data,
+ regvolt[i]);
+ data->in_min[i] = vt8231_read_value(data,
+ regvoltmin[i]);
+ data->in_max[i] = vt8231_read_value(data,
+ regvoltmax[i]);
+ }
+ }
+ for (i = 0; i < 2; i++) {
+ data->fan[i] = vt8231_read_value(data,
+ VT8231_REG_FAN(i));
+ data->fan_min[i] = vt8231_read_value(data,
+ VT8231_REG_FAN_MIN(i));
+ }
+
+ low = vt8231_read_value(data, VT8231_REG_TEMP_LOW01);
+ low = (low >> 6) | ((low & 0x30) >> 2)
+ | (vt8231_read_value(data, VT8231_REG_TEMP_LOW25) << 4);
+ for (i = 0; i < 6; i++) {
+ if (ISTEMP(i, data->uch_config)) {
+ data->temp[i] = (vt8231_read_value(data,
+ regtemp[i]) << 2)
+ | ((low >> (2 * i)) & 0x03);
+ data->temp_max[i] = vt8231_read_value(data,
+ regtempmax[i]);
+ data->temp_min[i] = vt8231_read_value(data,
+ regtempmin[i]);
+ }
+ }
+
+ i = vt8231_read_value(data, VT8231_REG_FANDIV);
+ data->fan_div[0] = (i >> 4) & 0x03;
+ data->fan_div[1] = i >> 6;
+ data->alarms = vt8231_read_value(data, VT8231_REG_ALARM1) |
+ (vt8231_read_value(data, VT8231_REG_ALARM2) << 8);
+
+ /* Set alarm flags correctly */
+ if (!data->fan[0] && data->fan_min[0])
+ data->alarms |= 0x40;
+ else if (data->fan[0] && !data->fan_min[0])
+ data->alarms &= ~0x40;
+
+ if (!data->fan[1] && data->fan_min[1])
+ data->alarms |= 0x80;
+ else if (data->fan[1] && !data->fan_min[1])
+ data->alarms &= ~0x80;
+
+ data->last_updated = jiffies;
+ data->valid = 1;
+ }
+
+ mutex_unlock(&data->update_lock);
+
+ return data;
+}
+
+static int vt8231_device_add(unsigned short address)
+{
+ struct resource res = {
+ .start = address,
+ .end = address + VT8231_EXTENT - 1,
+ .name = "vt8231",
+ .flags = IORESOURCE_IO,
+ };
+ int err;
+
+ err = acpi_check_resource_conflict(&res);
+ if (err)
+ goto exit;
+
+ pdev = platform_device_alloc("vt8231", address);
+ if (!pdev) {
+ err = -ENOMEM;
+ pr_err("Device allocation failed\n");
+ goto exit;
+ }
+
+ err = platform_device_add_resources(pdev, &res, 1);
+ if (err) {
+ pr_err("Device resource addition failed (%d)\n", err);
+ goto exit_device_put;
+ }
+
+ err = platform_device_add(pdev);
+ if (err) {
+ pr_err("Device addition failed (%d)\n", err);
+ goto exit_device_put;
+ }
+
+ return 0;
+
+exit_device_put:
+ platform_device_put(pdev);
+exit:
+ return err;
+}
+
+static int vt8231_pci_probe(struct pci_dev *dev,
+ const struct pci_device_id *id)
+{
+ u16 address, val;
+ if (force_addr) {
+ address = force_addr & 0xff00;
+ dev_warn(&dev->dev, "Forcing ISA address 0x%x\n",
+ address);
+
+ if (PCIBIOS_SUCCESSFUL !=
+ pci_write_config_word(dev, VT8231_BASE_REG, address | 1))
+ return -ENODEV;
+ }
+
+ if (PCIBIOS_SUCCESSFUL != pci_read_config_word(dev, VT8231_BASE_REG,
+ &val))
+ return -ENODEV;
+
+ address = val & ~(VT8231_EXTENT - 1);
+ if (address == 0) {
+ dev_err(&dev->dev, "base address not set - upgrade BIOS or use force_addr=0xaddr\n");
+ return -ENODEV;
+ }
+
+ if (PCIBIOS_SUCCESSFUL != pci_read_config_word(dev, VT8231_ENABLE_REG,
+ &val))
+ return -ENODEV;
+
+ if (!(val & 0x0001)) {
+ dev_warn(&dev->dev, "enabling sensors\n");
+ if (PCIBIOS_SUCCESSFUL !=
+ pci_write_config_word(dev, VT8231_ENABLE_REG,
+ val | 0x0001))
+ return -ENODEV;
+ }
+
+ if (platform_driver_register(&vt8231_driver))
+ goto exit;
+
+ /* Sets global pdev as a side effect */
+ if (vt8231_device_add(address))
+ goto exit_unregister;
+
+ /*
+ * Always return failure here. This is to allow other drivers to bind
+ * to this pci device. We don't really want to have control over the
+ * pci device, we only wanted to read as few register values from it.
+ */
+
+ /*
+ * We do, however, mark ourselves as using the PCI device to stop it
+ * getting unloaded.
+ */
+ s_bridge = pci_dev_get(dev);
+ return -ENODEV;
+
+exit_unregister:
+ platform_driver_unregister(&vt8231_driver);
+exit:
+ return -ENODEV;
+}
+
+static int __init sm_vt8231_init(void)
+{
+ return pci_register_driver(&vt8231_pci_driver);
+}
+
+static void __exit sm_vt8231_exit(void)
+{
+ pci_unregister_driver(&vt8231_pci_driver);
+ if (s_bridge != NULL) {
+ platform_device_unregister(pdev);
+ platform_driver_unregister(&vt8231_driver);
+ pci_dev_put(s_bridge);
+ s_bridge = NULL;
+ }
+}
+
+MODULE_AUTHOR("Roger Lucas <vt8231@hiddenengine.co.uk>");
+MODULE_DESCRIPTION("VT8231 sensors");
+MODULE_LICENSE("GPL");
+
+module_init(sm_vt8231_init);
+module_exit(sm_vt8231_exit);
generated by cgit v1.2.3-54-g00ecf (git 2.45.2) at 2024-11-01 22:36:19 +0000