summaryrefslogtreecommitdiff
path: root/drivers/hwmon
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/hwmon')
-rw-r--r--drivers/hwmon/Kconfig31
-rw-r--r--drivers/hwmon/Makefile4
-rw-r--r--drivers/hwmon/ads7828.c10
-rw-r--r--drivers/hwmon/iio_hwmon.c11
-rw-r--r--drivers/hwmon/ltc2990.c161
-rw-r--r--drivers/hwmon/nsa320-hwmon.c215
-rw-r--r--drivers/hwmon/ntc_thermistor.c44
-rw-r--r--drivers/hwmon/pmbus/Kconfig4
-rw-r--r--drivers/hwmon/pmbus/adm1275.c56
-rw-r--r--drivers/hwmon/scpi-hwmon.c14
-rw-r--r--drivers/hwmon/vexpress-hwmon.c (renamed from drivers/hwmon/vexpress.c)0
11 files changed, 541 insertions, 9 deletions
diff --git a/drivers/hwmon/Kconfig b/drivers/hwmon/Kconfig
index 60fb80bd3..5c2d13a68 100644
--- a/drivers/hwmon/Kconfig
+++ b/drivers/hwmon/Kconfig
@@ -685,6 +685,20 @@ config SENSORS_LTC2945
This driver can also be built as a module. If so, the module will
be called ltc2945.
+config SENSORS_LTC2990
+ tristate "Linear Technology LTC2990 (current monitoring mode only)"
+ depends on I2C
+ help
+ If you say yes here you get support for Linear Technology LTC2990
+ I2C System Monitor. The LTC2990 supports a combination of voltage,
+ current and temperature monitoring, but in addition to the Vcc supply
+ voltage and chip temperature, this driver currently only supports
+ reading two currents by measuring two differential voltages across
+ series resistors.
+
+ This driver can also be built as a module. If so, the module will
+ be called ltc2990.
+
config SENSORS_LTC4151
tristate "Linear Technology LTC4151"
depends on I2C
@@ -1127,7 +1141,7 @@ config SENSORS_NTC_THERMISTOR
Currently, this driver supports
NCP15WB473, NCP18WB473, NCP21WB473, NCP03WB473, NCP15WL333,
- and NCP03WF104 from Murata and B57330V2103 from EPCOS.
+ NCP03WF104 and NCP15XH103 from Murata and B57330V2103 from EPCOS.
This driver can also be built as a module. If so, the module
will be called ntc-thermistor.
@@ -1176,6 +1190,21 @@ config SENSORS_NCT7904
This driver can also be built as a module. If so, the module
will be called nct7904.
+config SENSORS_NSA320
+ tristate "ZyXEL NSA320 and compatible fan speed and temperature sensors"
+ depends on GPIOLIB && OF
+ depends on MACH_KIRKWOOD || COMPILE_TEST
+ help
+ If you say yes here you get support for hardware monitoring
+ for the ZyXEL NSA320 Media Server and other compatible devices
+ (probably the NSA325 and some NSA310 variants).
+
+ The sensor data is taken from a Holtek HT46R065 microcontroller
+ connected to GPIO lines.
+
+ This driver can also be built as a module. If so, the module
+ will be called nsa320-hwmon.
+
config SENSORS_PCF8591
tristate "Philips PCF8591 ADC/DAC"
depends on I2C
diff --git a/drivers/hwmon/Makefile b/drivers/hwmon/Makefile
index 30c94df31..58cc3acba 100644
--- a/drivers/hwmon/Makefile
+++ b/drivers/hwmon/Makefile
@@ -100,6 +100,7 @@ obj-$(CONFIG_SENSORS_LM95234) += lm95234.o
obj-$(CONFIG_SENSORS_LM95241) += lm95241.o
obj-$(CONFIG_SENSORS_LM95245) += lm95245.o
obj-$(CONFIG_SENSORS_LTC2945) += ltc2945.o
+obj-$(CONFIG_SENSORS_LTC2990) += ltc2990.o
obj-$(CONFIG_SENSORS_LTC4151) += ltc4151.o
obj-$(CONFIG_SENSORS_LTC4215) += ltc4215.o
obj-$(CONFIG_SENSORS_LTC4222) += ltc4222.o
@@ -123,6 +124,7 @@ obj-$(CONFIG_SENSORS_NCT6683) += nct6683.o
obj-$(CONFIG_SENSORS_NCT6775) += nct6775.o
obj-$(CONFIG_SENSORS_NCT7802) += nct7802.o
obj-$(CONFIG_SENSORS_NCT7904) += nct7904.o
+obj-$(CONFIG_SENSORS_NSA320) += nsa320-hwmon.o
obj-$(CONFIG_SENSORS_NTC_THERMISTOR) += ntc_thermistor.o
obj-$(CONFIG_SENSORS_PC87360) += pc87360.o
obj-$(CONFIG_SENSORS_PC87427) += pc87427.o
@@ -149,7 +151,7 @@ obj-$(CONFIG_SENSORS_TMP103) += tmp103.o
obj-$(CONFIG_SENSORS_TMP401) += tmp401.o
obj-$(CONFIG_SENSORS_TMP421) += tmp421.o
obj-$(CONFIG_SENSORS_TWL4030_MADC)+= twl4030-madc-hwmon.o
-obj-$(CONFIG_SENSORS_VEXPRESS) += vexpress.o
+obj-$(CONFIG_SENSORS_VEXPRESS) += vexpress-hwmon.o
obj-$(CONFIG_SENSORS_VIA_CPUTEMP)+= via-cputemp.o
obj-$(CONFIG_SENSORS_VIA686A) += via686a.o
obj-$(CONFIG_SENSORS_VT1211) += vt1211.o
diff --git a/drivers/hwmon/ads7828.c b/drivers/hwmon/ads7828.c
index 6c99ee7ba..ee396ff16 100644
--- a/drivers/hwmon/ads7828.c
+++ b/drivers/hwmon/ads7828.c
@@ -120,6 +120,7 @@ static int ads7828_probe(struct i2c_client *client,
unsigned int vref_mv = ADS7828_INT_VREF_MV;
bool diff_input = false;
bool ext_vref = false;
+ unsigned int regval;
data = devm_kzalloc(dev, sizeof(struct ads7828_data), GFP_KERNEL);
if (!data)
@@ -154,6 +155,15 @@ static int ads7828_probe(struct i2c_client *client,
if (!diff_input)
data->cmd_byte |= ADS7828_CMD_SD_SE;
+ /*
+ * Datasheet specifies internal reference voltage is disabled by
+ * default. The internal reference voltage needs to be enabled and
+ * voltage needs to settle before getting valid ADC data. So perform a
+ * dummy read to enable the internal reference voltage.
+ */
+ if (!ext_vref)
+ regmap_read(data->regmap, data->cmd_byte, &regval);
+
hwmon_dev = devm_hwmon_device_register_with_groups(dev, client->name,
data,
ads7828_groups);
diff --git a/drivers/hwmon/iio_hwmon.c b/drivers/hwmon/iio_hwmon.c
index 17ae2eb26..b550ba5fa 100644
--- a/drivers/hwmon/iio_hwmon.c
+++ b/drivers/hwmon/iio_hwmon.c
@@ -67,6 +67,7 @@ static int iio_hwmon_probe(struct platform_device *pdev)
enum iio_chan_type type;
struct iio_channel *channels;
const char *name = "iio_hwmon";
+ char *sname;
if (dev->of_node && dev->of_node->name)
name = dev->of_node->name;
@@ -144,7 +145,15 @@ static int iio_hwmon_probe(struct platform_device *pdev)
st->attr_group.attrs = st->attrs;
st->groups[0] = &st->attr_group;
- st->hwmon_dev = hwmon_device_register_with_groups(dev, name, st,
+
+ sname = devm_kstrdup(dev, name, GFP_KERNEL);
+ if (!sname) {
+ ret = -ENOMEM;
+ goto error_release_channels;
+ }
+
+ strreplace(sname, '-', '_');
+ st->hwmon_dev = hwmon_device_register_with_groups(dev, sname, st,
st->groups);
if (IS_ERR(st->hwmon_dev)) {
ret = PTR_ERR(st->hwmon_dev);
diff --git a/drivers/hwmon/ltc2990.c b/drivers/hwmon/ltc2990.c
new file mode 100644
index 000000000..8f8fe059a
--- /dev/null
+++ b/drivers/hwmon/ltc2990.c
@@ -0,0 +1,161 @@
+/*
+ * Driver for Linear Technology LTC2990 power monitor
+ *
+ * Copyright (C) 2014 Topic Embedded Products
+ * Author: Mike Looijmans <mike.looijmans@topic.nl>
+ *
+ * License: GPLv2
+ *
+ * This driver assumes the chip is wired as a dual current monitor, and
+ * reports the voltage drop across two series resistors. It also reports
+ * the chip's internal temperature and Vcc power supply voltage.
+ */
+
+#include <linux/err.h>
+#include <linux/hwmon.h>
+#include <linux/hwmon-sysfs.h>
+#include <linux/i2c.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+
+#define LTC2990_STATUS 0x00
+#define LTC2990_CONTROL 0x01
+#define LTC2990_TRIGGER 0x02
+#define LTC2990_TINT_MSB 0x04
+#define LTC2990_V1_MSB 0x06
+#define LTC2990_V2_MSB 0x08
+#define LTC2990_V3_MSB 0x0A
+#define LTC2990_V4_MSB 0x0C
+#define LTC2990_VCC_MSB 0x0E
+
+#define LTC2990_CONTROL_KELVIN BIT(7)
+#define LTC2990_CONTROL_SINGLE BIT(6)
+#define LTC2990_CONTROL_MEASURE_ALL (0x3 << 3)
+#define LTC2990_CONTROL_MODE_CURRENT 0x06
+#define LTC2990_CONTROL_MODE_VOLTAGE 0x07
+
+/* convert raw register value to sign-extended integer in 16-bit range */
+static int ltc2990_voltage_to_int(int raw)
+{
+ if (raw & BIT(14))
+ return -(0x4000 - (raw & 0x3FFF)) << 2;
+ else
+ return (raw & 0x3FFF) << 2;
+}
+
+/* Return the converted value from the given register in uV or mC */
+static int ltc2990_get_value(struct i2c_client *i2c, u8 reg, int *result)
+{
+ int val;
+
+ val = i2c_smbus_read_word_swapped(i2c, reg);
+ if (unlikely(val < 0))
+ return val;
+
+ switch (reg) {
+ case LTC2990_TINT_MSB:
+ /* internal temp, 0.0625 degrees/LSB, 13-bit */
+ val = (val & 0x1FFF) << 3;
+ *result = (val * 1000) >> 7;
+ break;
+ case LTC2990_V1_MSB:
+ case LTC2990_V3_MSB:
+ /* Vx-Vy, 19.42uV/LSB. Depends on mode. */
+ *result = ltc2990_voltage_to_int(val) * 1942 / (4 * 100);
+ break;
+ case LTC2990_VCC_MSB:
+ /* Vcc, 305.18μV/LSB, 2.5V offset */
+ *result = (ltc2990_voltage_to_int(val) * 30518 /
+ (4 * 100 * 1000)) + 2500;
+ break;
+ default:
+ return -EINVAL; /* won't happen, keep compiler happy */
+ }
+
+ return 0;
+}
+
+static ssize_t ltc2990_show_value(struct device *dev,
+ struct device_attribute *da, char *buf)
+{
+ struct sensor_device_attribute *attr = to_sensor_dev_attr(da);
+ int value;
+ int ret;
+
+ ret = ltc2990_get_value(dev_get_drvdata(dev), attr->index, &value);
+ if (unlikely(ret < 0))
+ return ret;
+
+ return snprintf(buf, PAGE_SIZE, "%d\n", value);
+}
+
+static SENSOR_DEVICE_ATTR(temp1_input, S_IRUGO, ltc2990_show_value, NULL,
+ LTC2990_TINT_MSB);
+static SENSOR_DEVICE_ATTR(curr1_input, S_IRUGO, ltc2990_show_value, NULL,
+ LTC2990_V1_MSB);
+static SENSOR_DEVICE_ATTR(curr2_input, S_IRUGO, ltc2990_show_value, NULL,
+ LTC2990_V3_MSB);
+static SENSOR_DEVICE_ATTR(in0_input, S_IRUGO, ltc2990_show_value, NULL,
+ LTC2990_VCC_MSB);
+
+static struct attribute *ltc2990_attrs[] = {
+ &sensor_dev_attr_temp1_input.dev_attr.attr,
+ &sensor_dev_attr_curr1_input.dev_attr.attr,
+ &sensor_dev_attr_curr2_input.dev_attr.attr,
+ &sensor_dev_attr_in0_input.dev_attr.attr,
+ NULL,
+};
+ATTRIBUTE_GROUPS(ltc2990);
+
+static int ltc2990_i2c_probe(struct i2c_client *i2c,
+ const struct i2c_device_id *id)
+{
+ int ret;
+ struct device *hwmon_dev;
+
+ if (!i2c_check_functionality(i2c->adapter, I2C_FUNC_SMBUS_BYTE_DATA |
+ I2C_FUNC_SMBUS_WORD_DATA))
+ return -ENODEV;
+
+ /* Setup continuous mode, current monitor */
+ ret = i2c_smbus_write_byte_data(i2c, LTC2990_CONTROL,
+ LTC2990_CONTROL_MEASURE_ALL |
+ LTC2990_CONTROL_MODE_CURRENT);
+ if (ret < 0) {
+ dev_err(&i2c->dev, "Error: Failed to set control mode.\n");
+ return ret;
+ }
+ /* Trigger once to start continuous conversion */
+ ret = i2c_smbus_write_byte_data(i2c, LTC2990_TRIGGER, 1);
+ if (ret < 0) {
+ dev_err(&i2c->dev, "Error: Failed to start acquisition.\n");
+ return ret;
+ }
+
+ hwmon_dev = devm_hwmon_device_register_with_groups(&i2c->dev,
+ i2c->name,
+ i2c,
+ ltc2990_groups);
+
+ return PTR_ERR_OR_ZERO(hwmon_dev);
+}
+
+static const struct i2c_device_id ltc2990_i2c_id[] = {
+ { "ltc2990", 0 },
+ {}
+};
+MODULE_DEVICE_TABLE(i2c, ltc2990_i2c_id);
+
+static struct i2c_driver ltc2990_i2c_driver = {
+ .driver = {
+ .name = "ltc2990",
+ },
+ .probe = ltc2990_i2c_probe,
+ .id_table = ltc2990_i2c_id,
+};
+
+module_i2c_driver(ltc2990_i2c_driver);
+
+MODULE_DESCRIPTION("LTC2990 Sensor Driver");
+MODULE_AUTHOR("Topic Embedded Products");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/hwmon/nsa320-hwmon.c b/drivers/hwmon/nsa320-hwmon.c
new file mode 100644
index 000000000..0517a2657
--- /dev/null
+++ b/drivers/hwmon/nsa320-hwmon.c
@@ -0,0 +1,215 @@
+/*
+ * drivers/hwmon/nsa320-hwmon.c
+ *
+ * ZyXEL NSA320 Media Servers
+ * hardware monitoring
+ *
+ * Copyright (C) 2016 Adam Baker <linux@baker-net.org.uk>
+ * based on a board file driver
+ * Copyright (C) 2012 Peter Schildmann <linux@schildmann.info>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License v2 as published by the
+ * Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ */
+
+#include <linux/bitops.h>
+#include <linux/delay.h>
+#include <linux/err.h>
+#include <linux/gpio/consumer.h>
+#include <linux/hwmon.h>
+#include <linux/hwmon-sysfs.h>
+#include <linux/jiffies.h>
+#include <linux/module.h>
+#include <linux/mutex.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
+#include <linux/of_platform.h>
+#include <linux/platform_device.h>
+
+/* Tests for error return values rely upon this value being < 0x80 */
+#define MAGIC_NUMBER 0x55
+
+/*
+ * The Zyxel hwmon MCU is a Holtek HT46R065 that is factory programmed
+ * to perform temperature and fan speed monitoring. It is read by taking
+ * the active pin low. The 32 bit output word is then clocked onto the
+ * data line. The MSB of the data word is a magic nuber to indicate it
+ * has been read correctly, the next byte is the fan speed (in hundreds
+ * of RPM) and the last two bytes are the temperature (in tenths of a
+ * degree)
+ */
+
+struct nsa320_hwmon {
+ struct mutex update_lock; /* lock GPIO operations */
+ unsigned long last_updated; /* jiffies */
+ unsigned long mcu_data;
+ struct gpio_desc *act;
+ struct gpio_desc *clk;
+ struct gpio_desc *data;
+};
+
+enum nsa320_inputs {
+ NSA320_TEMP = 0,
+ NSA320_FAN = 1,
+};
+
+static const char * const nsa320_input_names[] = {
+ [NSA320_TEMP] = "System Temperature",
+ [NSA320_FAN] = "Chassis Fan",
+};
+
+/*
+ * Although this protocol looks similar to SPI the long delay
+ * between the active (aka chip select) signal and the shorter
+ * delay between clock pulses are needed for reliable operation.
+ * The delays provided are taken from the manufacturer kernel,
+ * testing suggest they probably incorporate a reasonable safety
+ * margin. (The single device tested became unreliable if the
+ * delay was reduced to 1/10th of this value.)
+ */
+static s32 nsa320_hwmon_update(struct device *dev)
+{
+ u32 mcu_data;
+ u32 mask;
+ struct nsa320_hwmon *hwmon = dev_get_drvdata(dev);
+
+ mutex_lock(&hwmon->update_lock);
+
+ mcu_data = hwmon->mcu_data;
+
+ if (time_after(jiffies, hwmon->last_updated + HZ) || mcu_data == 0) {
+ gpiod_set_value(hwmon->act, 1);
+ msleep(100);
+
+ mcu_data = 0;
+ for (mask = BIT(31); mask; mask >>= 1) {
+ gpiod_set_value(hwmon->clk, 0);
+ usleep_range(100, 200);
+ gpiod_set_value(hwmon->clk, 1);
+ usleep_range(100, 200);
+ if (gpiod_get_value(hwmon->data))
+ mcu_data |= mask;
+ }
+
+ gpiod_set_value(hwmon->act, 0);
+ dev_dbg(dev, "Read raw MCU data %08x\n", mcu_data);
+
+ if ((mcu_data >> 24) != MAGIC_NUMBER) {
+ dev_dbg(dev, "Read invalid MCU data %08x\n", mcu_data);
+ mcu_data = -EIO;
+ } else {
+ hwmon->mcu_data = mcu_data;
+ hwmon->last_updated = jiffies;
+ }
+ }
+
+ mutex_unlock(&hwmon->update_lock);
+
+ return mcu_data;
+}
+
+static ssize_t show_label(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ int channel = to_sensor_dev_attr(attr)->index;
+
+ return sprintf(buf, "%s\n", nsa320_input_names[channel]);
+}
+
+static ssize_t show_temp(struct device *dev, struct device_attribute *attr,
+ char *buf)
+{
+ s32 mcu_data = nsa320_hwmon_update(dev);
+
+ if (mcu_data < 0)
+ return mcu_data;
+
+ return sprintf(buf, "%d\n", (mcu_data & 0xffff) * 100);
+}
+
+static ssize_t show_fan(struct device *dev, struct device_attribute *attr,
+ char *buf)
+{
+ s32 mcu_data = nsa320_hwmon_update(dev);
+
+ if (mcu_data < 0)
+ return mcu_data;
+
+ return sprintf(buf, "%d\n", ((mcu_data & 0xff0000) >> 16) * 100);
+}
+
+static SENSOR_DEVICE_ATTR(temp1_label, S_IRUGO, show_label, NULL, NSA320_TEMP);
+static DEVICE_ATTR(temp1_input, S_IRUGO, show_temp, NULL);
+static SENSOR_DEVICE_ATTR(fan1_label, S_IRUGO, show_label, NULL, NSA320_FAN);
+static DEVICE_ATTR(fan1_input, S_IRUGO, show_fan, NULL);
+
+static struct attribute *nsa320_attrs[] = {
+ &sensor_dev_attr_temp1_label.dev_attr.attr,
+ &dev_attr_temp1_input.attr,
+ &sensor_dev_attr_fan1_label.dev_attr.attr,
+ &dev_attr_fan1_input.attr,
+ NULL
+};
+
+ATTRIBUTE_GROUPS(nsa320);
+
+static const struct of_device_id of_nsa320_hwmon_match[] = {
+ { .compatible = "zyxel,nsa320-mcu", },
+ { },
+};
+
+static int nsa320_hwmon_probe(struct platform_device *pdev)
+{
+ struct nsa320_hwmon *hwmon;
+ struct device *classdev;
+
+ hwmon = devm_kzalloc(&pdev->dev, sizeof(*hwmon), GFP_KERNEL);
+ if (!hwmon)
+ return -ENOMEM;
+
+ /* Look up the GPIO pins to use */
+ hwmon->act = devm_gpiod_get(&pdev->dev, "act", GPIOD_OUT_LOW);
+ if (IS_ERR(hwmon->act))
+ return PTR_ERR(hwmon->act);
+
+ hwmon->clk = devm_gpiod_get(&pdev->dev, "clk", GPIOD_OUT_HIGH);
+ if (IS_ERR(hwmon->clk))
+ return PTR_ERR(hwmon->clk);
+
+ hwmon->data = devm_gpiod_get(&pdev->dev, "data", GPIOD_IN);
+ if (IS_ERR(hwmon->data))
+ return PTR_ERR(hwmon->data);
+
+ mutex_init(&hwmon->update_lock);
+
+ classdev = devm_hwmon_device_register_with_groups(&pdev->dev,
+ "nsa320", hwmon, nsa320_groups);
+
+ return PTR_ERR_OR_ZERO(classdev);
+
+}
+
+/* All allocations use devres so remove() is not needed. */
+
+static struct platform_driver nsa320_hwmon_driver = {
+ .probe = nsa320_hwmon_probe,
+ .driver = {
+ .name = "nsa320-hwmon",
+ .of_match_table = of_match_ptr(of_nsa320_hwmon_match),
+ },
+};
+
+module_platform_driver(nsa320_hwmon_driver);
+
+MODULE_DEVICE_TABLE(of, of_nsa320_hwmon_match);
+MODULE_AUTHOR("Peter Schildmann <linux@schildmann.info>");
+MODULE_AUTHOR("Adam Baker <linux@baker-net.org.uk>");
+MODULE_DESCRIPTION("NSA320 Hardware Monitoring");
+MODULE_LICENSE("GPL v2");
+MODULE_ALIAS("platform:nsa320-hwmon");
diff --git a/drivers/hwmon/ntc_thermistor.c b/drivers/hwmon/ntc_thermistor.c
index feed30646..faa6e8dfb 100644
--- a/drivers/hwmon/ntc_thermistor.c
+++ b/drivers/hwmon/ntc_thermistor.c
@@ -54,6 +54,7 @@ static const struct platform_device_id ntc_thermistor_id[] = {
{ "ncp15wl333", TYPE_NCPXXWL333 },
{ "b57330v2103", TYPE_B57330V2103},
{ "ncp03wf104", TYPE_NCPXXWF104 },
+ { "ncp15xh103", TYPE_NCPXXXH103 },
{ },
};
@@ -173,6 +174,43 @@ static const struct ntc_compensation ncpXXwf104[] = {
{ .temp_c = 125, .ohm = 2522 },
};
+static const struct ntc_compensation ncpXXxh103[] = {
+ { .temp_c = -40, .ohm = 247565 },
+ { .temp_c = -35, .ohm = 181742 },
+ { .temp_c = -30, .ohm = 135128 },
+ { .temp_c = -25, .ohm = 101678 },
+ { .temp_c = -20, .ohm = 77373 },
+ { .temp_c = -15, .ohm = 59504 },
+ { .temp_c = -10, .ohm = 46222 },
+ { .temp_c = -5, .ohm = 36244 },
+ { .temp_c = 0, .ohm = 28674 },
+ { .temp_c = 5, .ohm = 22878 },
+ { .temp_c = 10, .ohm = 18399 },
+ { .temp_c = 15, .ohm = 14910 },
+ { .temp_c = 20, .ohm = 12169 },
+ { .temp_c = 25, .ohm = 10000 },
+ { .temp_c = 30, .ohm = 8271 },
+ { .temp_c = 35, .ohm = 6883 },
+ { .temp_c = 40, .ohm = 5762 },
+ { .temp_c = 45, .ohm = 4851 },
+ { .temp_c = 50, .ohm = 4105 },
+ { .temp_c = 55, .ohm = 3492 },
+ { .temp_c = 60, .ohm = 2985 },
+ { .temp_c = 65, .ohm = 2563 },
+ { .temp_c = 70, .ohm = 2211 },
+ { .temp_c = 75, .ohm = 1915 },
+ { .temp_c = 80, .ohm = 1666 },
+ { .temp_c = 85, .ohm = 1454 },
+ { .temp_c = 90, .ohm = 1275 },
+ { .temp_c = 95, .ohm = 1121 },
+ { .temp_c = 100, .ohm = 990 },
+ { .temp_c = 105, .ohm = 876 },
+ { .temp_c = 110, .ohm = 779 },
+ { .temp_c = 115, .ohm = 694 },
+ { .temp_c = 120, .ohm = 620 },
+ { .temp_c = 125, .ohm = 556 },
+};
+
/*
* The following compensation table is from the specification of EPCOS NTC
* Thermistors Datasheet
@@ -260,6 +298,8 @@ static const struct of_device_id ntc_match[] = {
.data = &ntc_thermistor_id[5]},
{ .compatible = "murata,ncp03wf104",
.data = &ntc_thermistor_id[6] },
+ { .compatible = "murata,ncp15xh103",
+ .data = &ntc_thermistor_id[7] },
/* Usage of vendor name "ntc" is deprecated */
{ .compatible = "ntc,ncp15wb473",
@@ -609,6 +649,10 @@ static int ntc_thermistor_probe(struct platform_device *pdev)
data->comp = ncpXXwf104;
data->n_comp = ARRAY_SIZE(ncpXXwf104);
break;
+ case TYPE_NCPXXXH103:
+ data->comp = ncpXXxh103;
+ data->n_comp = ARRAY_SIZE(ncpXXxh103);
+ break;
default:
dev_err(&pdev->dev, "Unknown device type: %lu(%s)\n",
pdev_id->driver_data, pdev_id->name);
diff --git a/drivers/hwmon/pmbus/Kconfig b/drivers/hwmon/pmbus/Kconfig
index 7e5cc3d02..054d3d863 100644
--- a/drivers/hwmon/pmbus/Kconfig
+++ b/drivers/hwmon/pmbus/Kconfig
@@ -31,8 +31,8 @@ config SENSORS_ADM1275
default n
help
If you say yes here you get hardware monitoring support for Analog
- Devices ADM1075, ADM1275, ADM1276, ADM1293, and ADM1294 Hot-Swap
- Controller and Digital Power Monitors.
+ Devices ADM1075, ADM1275, ADM1276, ADM1278, ADM1293, and ADM1294
+ Hot-Swap Controller and Digital Power Monitors.
This driver can also be built as a module. If so, the module will
be called adm1275.
diff --git a/drivers/hwmon/pmbus/adm1275.c b/drivers/hwmon/pmbus/adm1275.c
index 188af4c89..3baa4f4a8 100644
--- a/drivers/hwmon/pmbus/adm1275.c
+++ b/drivers/hwmon/pmbus/adm1275.c
@@ -24,7 +24,7 @@
#include <linux/bitops.h>
#include "pmbus.h"
-enum chips { adm1075, adm1275, adm1276, adm1293, adm1294 };
+enum chips { adm1075, adm1275, adm1276, adm1278, adm1293, adm1294 };
#define ADM1275_MFR_STATUS_IOUT_WARN2 BIT(0)
#define ADM1293_MFR_STATUS_VAUX_UV_WARN BIT(5)
@@ -41,6 +41,10 @@ enum chips { adm1075, adm1275, adm1276, adm1293, adm1294 };
#define ADM1075_IRANGE_25 BIT(3)
#define ADM1075_IRANGE_MASK (BIT(3) | BIT(4))
+#define ADM1278_TEMP1_EN BIT(3)
+#define ADM1278_VIN_EN BIT(2)
+#define ADM1278_VOUT_EN BIT(1)
+
#define ADM1293_IRANGE_25 0
#define ADM1293_IRANGE_50 BIT(6)
#define ADM1293_IRANGE_100 BIT(7)
@@ -54,6 +58,7 @@ enum chips { adm1075, adm1275, adm1276, adm1293, adm1294 };
#define ADM1293_VAUX_EN BIT(1)
+#define ADM1278_PEAK_TEMP 0xd7
#define ADM1275_IOUT_WARN2_LIMIT 0xd7
#define ADM1275_DEVICE_CONFIG 0xd8
@@ -80,6 +85,7 @@ struct adm1275_data {
bool have_iout_min;
bool have_pin_min;
bool have_pin_max;
+ bool have_temp_max;
struct pmbus_driver_info info;
};
@@ -113,6 +119,13 @@ static const struct coefficients adm1276_coefficients[] = {
[4] = { 2115, 0, -1 }, /* power, vrange not set */
};
+static const struct coefficients adm1278_coefficients[] = {
+ [0] = { 19599, 0, -2 }, /* voltage */
+ [1] = { 800, 20475, -1 }, /* current */
+ [2] = { 6123, 0, -2 }, /* power */
+ [3] = { 42, 31880, -1 }, /* temperature */
+};
+
static const struct coefficients adm1293_coefficients[] = {
[0] = { 3333, -1, 0 }, /* voltage, vrange 1.2V */
[1] = { 5552, -5, -1 }, /* voltage, vrange 7.4V */
@@ -196,6 +209,11 @@ static int adm1275_read_word_data(struct i2c_client *client, int page, int reg)
return -ENXIO;
ret = pmbus_read_word_data(client, 0, ADM1276_PEAK_PIN);
break;
+ case PMBUS_VIRT_READ_TEMP_MAX:
+ if (!data->have_temp_max)
+ return -ENXIO;
+ ret = pmbus_read_word_data(client, 0, ADM1278_PEAK_TEMP);
+ break;
case PMBUS_VIRT_RESET_IOUT_HISTORY:
case PMBUS_VIRT_RESET_VOUT_HISTORY:
case PMBUS_VIRT_RESET_VIN_HISTORY:
@@ -204,6 +222,10 @@ static int adm1275_read_word_data(struct i2c_client *client, int page, int reg)
if (!data->have_pin_max)
return -ENXIO;
break;
+ case PMBUS_VIRT_RESET_TEMP_HISTORY:
+ if (!data->have_temp_max)
+ return -ENXIO;
+ break;
default:
ret = -ENODATA;
break;
@@ -245,6 +267,9 @@ static int adm1275_write_word_data(struct i2c_client *client, int page, int reg,
ret = pmbus_write_word_data(client, 0,
ADM1293_PIN_MIN, 0);
break;
+ case PMBUS_VIRT_RESET_TEMP_HISTORY:
+ ret = pmbus_write_word_data(client, 0, ADM1278_PEAK_TEMP, 0);
+ break;
default:
ret = -ENODATA;
break;
@@ -312,6 +337,7 @@ static const struct i2c_device_id adm1275_id[] = {
{ "adm1075", adm1075 },
{ "adm1275", adm1275 },
{ "adm1276", adm1276 },
+ { "adm1278", adm1278 },
{ "adm1293", adm1293 },
{ "adm1294", adm1294 },
{ }
@@ -329,6 +355,7 @@ static int adm1275_probe(struct i2c_client *client,
const struct i2c_device_id *mid;
const struct coefficients *coefficients;
int vindex = -1, voindex = -1, cindex = -1, pindex = -1;
+ int tindex = -1;
if (!i2c_check_functionality(client->adapter,
I2C_FUNC_SMBUS_READ_BYTE_DATA
@@ -386,6 +413,7 @@ static int adm1275_probe(struct i2c_client *client,
info->format[PSC_VOLTAGE_OUT] = direct;
info->format[PSC_CURRENT_OUT] = direct;
info->format[PSC_POWER] = direct;
+ info->format[PSC_TEMPERATURE] = direct;
info->func[0] = PMBUS_HAVE_IOUT | PMBUS_HAVE_STATUS_IOUT;
info->read_word_data = adm1275_read_word_data;
@@ -460,6 +488,27 @@ static int adm1275_probe(struct i2c_client *client,
info->func[0] |=
PMBUS_HAVE_VOUT | PMBUS_HAVE_STATUS_VOUT;
break;
+ case adm1278:
+ data->have_vout = true;
+ data->have_pin_max = true;
+ data->have_temp_max = true;
+
+ coefficients = adm1278_coefficients;
+ vindex = 0;
+ cindex = 1;
+ pindex = 2;
+ tindex = 3;
+
+ info->func[0] |= PMBUS_HAVE_PIN | PMBUS_HAVE_STATUS_INPUT;
+ if (config & ADM1278_TEMP1_EN)
+ info->func[0] |=
+ PMBUS_HAVE_TEMP | PMBUS_HAVE_STATUS_TEMP;
+ if (config & ADM1278_VIN_EN)
+ info->func[0] |= PMBUS_HAVE_VIN;
+ if (config & ADM1278_VOUT_EN)
+ info->func[0] |=
+ PMBUS_HAVE_VOUT | PMBUS_HAVE_STATUS_VOUT;
+ break;
case adm1293:
case adm1294:
data->have_iout_min = true;
@@ -537,6 +586,11 @@ static int adm1275_probe(struct i2c_client *client,
info->b[PSC_POWER] = coefficients[pindex].b;
info->R[PSC_POWER] = coefficients[pindex].R;
}
+ if (tindex >= 0) {
+ info->m[PSC_TEMPERATURE] = coefficients[tindex].m;
+ info->b[PSC_TEMPERATURE] = coefficients[tindex].b;
+ info->R[PSC_TEMPERATURE] = coefficients[tindex].R;
+ }
return pmbus_do_probe(client, id, info);
}
diff --git a/drivers/hwmon/scpi-hwmon.c b/drivers/hwmon/scpi-hwmon.c
index 7e20567bc..912b449c8 100644
--- a/drivers/hwmon/scpi-hwmon.c
+++ b/drivers/hwmon/scpi-hwmon.c
@@ -52,7 +52,7 @@ static int scpi_read_temp(void *dev, int *temp)
struct scpi_sensors *scpi_sensors = zone->scpi_sensors;
struct scpi_ops *scpi_ops = scpi_sensors->scpi_ops;
struct sensor_data *sensor = &scpi_sensors->data[zone->sensor_id];
- u32 value;
+ u64 value;
int ret;
ret = scpi_ops->sensor_get_value(sensor->info.sensor_id, &value);
@@ -70,7 +70,7 @@ scpi_show_sensor(struct device *dev, struct device_attribute *attr, char *buf)
struct scpi_sensors *scpi_sensors = dev_get_drvdata(dev);
struct scpi_ops *scpi_ops = scpi_sensors->scpi_ops;
struct sensor_data *sensor;
- u32 value;
+ u64 value;
int ret;
sensor = container_of(attr, struct sensor_data, dev_attr_input);
@@ -79,7 +79,7 @@ scpi_show_sensor(struct device *dev, struct device_attribute *attr, char *buf)
if (ret)
return ret;
- return sprintf(buf, "%u\n", value);
+ return sprintf(buf, "%llu\n", value);
}
static ssize_t
@@ -114,6 +114,7 @@ static int scpi_hwmon_probe(struct platform_device *pdev)
{
u16 nr_sensors, i;
int num_temp = 0, num_volt = 0, num_current = 0, num_power = 0;
+ int num_energy = 0;
struct scpi_ops *scpi_ops;
struct device *hwdev, *dev = &pdev->dev;
struct scpi_sensors *scpi_sensors;
@@ -182,6 +183,13 @@ static int scpi_hwmon_probe(struct platform_device *pdev)
"power%d_label", num_power + 1);
num_power++;
break;
+ case ENERGY:
+ snprintf(sensor->input, sizeof(sensor->input),
+ "energy%d_input", num_energy + 1);
+ snprintf(sensor->label, sizeof(sensor->input),
+ "energy%d_label", num_energy + 1);
+ num_energy++;
+ break;
default:
continue;
}
diff --git a/drivers/hwmon/vexpress.c b/drivers/hwmon/vexpress-hwmon.c
index 8ba419d34..8ba419d34 100644
--- a/drivers/hwmon/vexpress.c
+++ b/drivers/hwmon/vexpress-hwmon.c