summaryrefslogtreecommitdiff
path: root/drivers/i2c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/i2c')
-rw-r--r--drivers/i2c/busses/Kconfig14
-rw-r--r--drivers/i2c/busses/i2c-bcm-iproc.c177
-rw-r--r--drivers/i2c/busses/i2c-cadence.c14
-rw-r--r--drivers/i2c/busses/i2c-designware-baytrail.c5
-rw-r--r--drivers/i2c/busses/i2c-designware-core.c22
-rw-r--r--drivers/i2c/busses/i2c-designware-core.h2
-rw-r--r--drivers/i2c/busses/i2c-designware-platdrv.c1
-rw-r--r--drivers/i2c/busses/i2c-i801.c8
-rw-r--r--drivers/i2c/busses/i2c-imx.c12
-rw-r--r--drivers/i2c/busses/i2c-ismt.c2
-rw-r--r--drivers/i2c/busses/i2c-jz4780.c7
-rw-r--r--drivers/i2c/busses/i2c-mt65xx.c42
-rw-r--r--drivers/i2c/busses/i2c-octeon.c307
-rw-r--r--drivers/i2c/busses/i2c-piix4.c48
-rw-r--r--drivers/i2c/busses/i2c-qup.c977
-rw-r--r--drivers/i2c/busses/i2c-rcar.c2
-rw-r--r--drivers/i2c/busses/i2c-rk3x.c1
-rw-r--r--drivers/i2c/busses/i2c-tegra.c4
-rw-r--r--drivers/i2c/busses/i2c-xiic.c88
-rw-r--r--drivers/i2c/i2c-boardinfo.c6
-rw-r--r--drivers/i2c/i2c-core.c49
-rw-r--r--drivers/i2c/i2c-dev.c14
-rw-r--r--drivers/i2c/i2c-mux.c8
-rw-r--r--drivers/i2c/i2c-smbus.c8
-rw-r--r--drivers/i2c/i2c-stub.c8
-rw-r--r--drivers/i2c/muxes/Kconfig9
-rw-r--r--drivers/i2c/muxes/Makefile2
-rw-r--r--drivers/i2c/muxes/i2c-demux-pinctrl.c291
28 files changed, 1750 insertions, 378 deletions
diff --git a/drivers/i2c/busses/Kconfig b/drivers/i2c/busses/Kconfig
index 0299dfa74..0967e1a5b 100644
--- a/drivers/i2c/busses/Kconfig
+++ b/drivers/i2c/busses/Kconfig
@@ -789,7 +789,7 @@ config I2C_QUP
config I2C_RIIC
tristate "Renesas RIIC adapter"
- depends on ARCH_SHMOBILE || COMPILE_TEST
+ depends on ARCH_RENESAS || COMPILE_TEST
help
If you say yes to this option, support will be included for the
Renesas RIIC I2C interface.
@@ -833,7 +833,7 @@ config I2C_SH7760
config I2C_SH_MOBILE
tristate "SuperH Mobile I2C Controller"
depends on HAS_DMA
- depends on SUPERH || ARCH_SHMOBILE || COMPILE_TEST
+ depends on SUPERH || ARCH_RENESAS || COMPILE_TEST
help
If you say yes to this option, support will be included for the
built-in I2C interface on the Renesas SH-Mobile processor.
@@ -908,7 +908,7 @@ config I2C_TEGRA
config I2C_UNIPHIER
tristate "UniPhier FIFO-less I2C controller"
- depends on ARCH_UNIPHIER
+ depends on ARCH_UNIPHIER || COMPILE_TEST
help
If you say yes to this option, support will be included for
the UniPhier FIFO-less I2C interface embedded in PH1-LD4, PH1-sLD8,
@@ -916,7 +916,7 @@ config I2C_UNIPHIER
config I2C_UNIPHIER_F
tristate "UniPhier FIFO-builtin I2C controller"
- depends on ARCH_UNIPHIER
+ depends on ARCH_UNIPHIER || COMPILE_TEST
help
If you say yes to this option, support will be included for
the UniPhier FIFO-builtin I2C interface embedded in PH1-Pro4,
@@ -975,17 +975,17 @@ config I2C_XLR
config I2C_XLP9XX
tristate "XLP9XX I2C support"
- depends on CPU_XLP || COMPILE_TEST
+ depends on CPU_XLP || ARCH_VULCAN || COMPILE_TEST
help
This driver enables support for the on-chip I2C interface of
- the Broadcom XLP9xx/XLP5xx MIPS processors.
+ the Broadcom XLP9xx/XLP5xx MIPS and Vulcan ARM64 processors.
This driver can also be built as a module. If so, the module will
be called i2c-xlp9xx.
config I2C_RCAR
tristate "Renesas R-Car I2C Controller"
- depends on ARCH_SHMOBILE || COMPILE_TEST
+ depends on ARCH_RENESAS || COMPILE_TEST
select I2C_SLAVE
help
If you say yes to this option, support will be included for the
diff --git a/drivers/i2c/busses/i2c-bcm-iproc.c b/drivers/i2c/busses/i2c-bcm-iproc.c
index 0419f5284..b9f0fff4e 100644
--- a/drivers/i2c/busses/i2c-bcm-iproc.c
+++ b/drivers/i2c/busses/i2c-bcm-iproc.c
@@ -58,11 +58,13 @@
#define IE_M_RX_FIFO_FULL_SHIFT 31
#define IE_M_RX_THLD_SHIFT 30
#define IE_M_START_BUSY_SHIFT 28
+#define IE_M_TX_UNDERRUN_SHIFT 27
#define IS_OFFSET 0x3c
#define IS_M_RX_FIFO_FULL_SHIFT 31
#define IS_M_RX_THLD_SHIFT 30
#define IS_M_START_BUSY_SHIFT 28
+#define IS_M_TX_UNDERRUN_SHIFT 27
#define M_TX_OFFSET 0x40
#define M_TX_WR_STATUS_SHIFT 31
@@ -76,7 +78,7 @@
#define M_RX_DATA_SHIFT 0
#define M_RX_DATA_MASK 0xff
-#define I2C_TIMEOUT_MESC 100
+#define I2C_TIMEOUT_MSEC 50000
#define M_TX_RX_FIFO_SIZE 64
enum bus_speed_index {
@@ -95,12 +97,17 @@ struct bcm_iproc_i2c_dev {
struct completion done;
int xfer_is_done;
+
+ struct i2c_msg *msg;
+
+ /* bytes that have been transferred */
+ unsigned int tx_bytes;
};
/*
* Can be expanded in the future if more interrupt status bits are utilized
*/
-#define ISR_MASK (1 << IS_M_START_BUSY_SHIFT)
+#define ISR_MASK (BIT(IS_M_START_BUSY_SHIFT) | BIT(IS_M_TX_UNDERRUN_SHIFT))
static irqreturn_t bcm_iproc_i2c_isr(int irq, void *data)
{
@@ -112,13 +119,95 @@ static irqreturn_t bcm_iproc_i2c_isr(int irq, void *data)
if (!status)
return IRQ_NONE;
+ /* TX FIFO is empty and we have more data to send */
+ if (status & BIT(IS_M_TX_UNDERRUN_SHIFT)) {
+ struct i2c_msg *msg = iproc_i2c->msg;
+ unsigned int tx_bytes = msg->len - iproc_i2c->tx_bytes;
+ unsigned int i;
+ u32 val;
+
+ /* can only fill up to the FIFO size */
+ tx_bytes = min_t(unsigned int, tx_bytes, M_TX_RX_FIFO_SIZE);
+ for (i = 0; i < tx_bytes; i++) {
+ /* start from where we left over */
+ unsigned int idx = iproc_i2c->tx_bytes + i;
+
+ val = msg->buf[idx];
+
+ /* mark the last byte */
+ if (idx == msg->len - 1) {
+ u32 tmp;
+
+ val |= BIT(M_TX_WR_STATUS_SHIFT);
+
+ /*
+ * Since this is the last byte, we should
+ * now disable TX FIFO underrun interrupt
+ */
+ tmp = readl(iproc_i2c->base + IE_OFFSET);
+ tmp &= ~BIT(IE_M_TX_UNDERRUN_SHIFT);
+ writel(tmp, iproc_i2c->base + IE_OFFSET);
+ }
+
+ /* load data into TX FIFO */
+ writel(val, iproc_i2c->base + M_TX_OFFSET);
+ }
+ /* update number of transferred bytes */
+ iproc_i2c->tx_bytes += tx_bytes;
+ }
+
+ if (status & BIT(IS_M_START_BUSY_SHIFT)) {
+ iproc_i2c->xfer_is_done = 1;
+ complete_all(&iproc_i2c->done);
+ }
+
writel(status, iproc_i2c->base + IS_OFFSET);
- iproc_i2c->xfer_is_done = 1;
- complete_all(&iproc_i2c->done);
return IRQ_HANDLED;
}
+static int bcm_iproc_i2c_init(struct bcm_iproc_i2c_dev *iproc_i2c)
+{
+ u32 val;
+
+ /* put controller in reset */
+ val = readl(iproc_i2c->base + CFG_OFFSET);
+ val |= 1 << CFG_RESET_SHIFT;
+ val &= ~(1 << CFG_EN_SHIFT);
+ writel(val, iproc_i2c->base + CFG_OFFSET);
+
+ /* wait 100 usec per spec */
+ udelay(100);
+
+ /* bring controller out of reset */
+ val &= ~(1 << CFG_RESET_SHIFT);
+ writel(val, iproc_i2c->base + CFG_OFFSET);
+
+ /* flush TX/RX FIFOs and set RX FIFO threshold to zero */
+ val = (1 << M_FIFO_RX_FLUSH_SHIFT) | (1 << M_FIFO_TX_FLUSH_SHIFT);
+ writel(val, iproc_i2c->base + M_FIFO_CTRL_OFFSET);
+ /* disable all interrupts */
+ writel(0, iproc_i2c->base + IE_OFFSET);
+
+ /* clear all pending interrupts */
+ writel(0xffffffff, iproc_i2c->base + IS_OFFSET);
+
+ return 0;
+}
+
+static void bcm_iproc_i2c_enable_disable(struct bcm_iproc_i2c_dev *iproc_i2c,
+ bool enable)
+{
+ u32 val;
+
+ val = readl(iproc_i2c->base + CFG_OFFSET);
+ if (enable)
+ val |= BIT(CFG_EN_SHIFT);
+ else
+ val &= ~BIT(CFG_EN_SHIFT);
+ writel(val, iproc_i2c->base + CFG_OFFSET);
+}
+
static int bcm_iproc_i2c_check_status(struct bcm_iproc_i2c_dev *iproc_i2c,
struct i2c_msg *msg)
{
@@ -149,6 +238,12 @@ static int bcm_iproc_i2c_check_status(struct bcm_iproc_i2c_dev *iproc_i2c,
default:
dev_dbg(iproc_i2c->device, "unknown error code=%d\n", val);
+
+ /* re-initialize i2c for recovery */
+ bcm_iproc_i2c_enable_disable(iproc_i2c, false);
+ bcm_iproc_i2c_init(iproc_i2c);
+ bcm_iproc_i2c_enable_disable(iproc_i2c, true);
+
return -EIO;
}
}
@@ -159,7 +254,8 @@ static int bcm_iproc_i2c_xfer_single_msg(struct bcm_iproc_i2c_dev *iproc_i2c,
int ret, i;
u8 addr;
u32 val;
- unsigned long time_left = msecs_to_jiffies(I2C_TIMEOUT_MESC);
+ unsigned int tx_bytes;
+ unsigned long time_left = msecs_to_jiffies(I2C_TIMEOUT_MSEC);
/* check if bus is busy */
if (!!(readl(iproc_i2c->base + M_CMD_OFFSET) &
@@ -168,13 +264,20 @@ static int bcm_iproc_i2c_xfer_single_msg(struct bcm_iproc_i2c_dev *iproc_i2c,
return -EBUSY;
}
+ iproc_i2c->msg = msg;
+
/* format and load slave address into the TX FIFO */
addr = msg->addr << 1 | (msg->flags & I2C_M_RD ? 1 : 0);
writel(addr, iproc_i2c->base + M_TX_OFFSET);
- /* for a write transaction, load data into the TX FIFO */
+ /*
+ * For a write transaction, load data into the TX FIFO. Only allow
+ * loading up to TX FIFO size - 1 bytes of data since the first byte
+ * has been used up by the slave address
+ */
+ tx_bytes = min_t(unsigned int, msg->len, M_TX_RX_FIFO_SIZE - 1);
if (!(msg->flags & I2C_M_RD)) {
- for (i = 0; i < msg->len; i++) {
+ for (i = 0; i < tx_bytes; i++) {
val = msg->buf[i];
/* mark the last byte */
@@ -183,6 +286,7 @@ static int bcm_iproc_i2c_xfer_single_msg(struct bcm_iproc_i2c_dev *iproc_i2c,
writel(val, iproc_i2c->base + M_TX_OFFSET);
}
+ iproc_i2c->tx_bytes = tx_bytes;
}
/* mark as incomplete before starting the transaction */
@@ -194,13 +298,24 @@ static int bcm_iproc_i2c_xfer_single_msg(struct bcm_iproc_i2c_dev *iproc_i2c,
* transaction is done, i.e., the internal start_busy bit, transitions
* from 1 to 0.
*/
- writel(1 << IE_M_START_BUSY_SHIFT, iproc_i2c->base + IE_OFFSET);
+ val = BIT(IE_M_START_BUSY_SHIFT);
+
+ /*
+ * If TX data size is larger than the TX FIFO, need to enable TX
+ * underrun interrupt, which will be triggerred when the TX FIFO is
+ * empty. When that happens we can then pump more data into the FIFO
+ */
+ if (!(msg->flags & I2C_M_RD) &&
+ msg->len > iproc_i2c->tx_bytes)
+ val |= BIT(IE_M_TX_UNDERRUN_SHIFT);
+
+ writel(val, iproc_i2c->base + IE_OFFSET);
/*
* Now we can activate the transfer. For a read operation, specify the
* number of bytes to read
*/
- val = 1 << M_CMD_START_BUSY_SHIFT;
+ val = BIT(M_CMD_START_BUSY_SHIFT);
if (msg->flags & I2C_M_RD) {
val |= (M_CMD_PROTOCOL_BLK_RD << M_CMD_PROTOCOL_SHIFT) |
(msg->len << M_CMD_RD_CNT_SHIFT);
@@ -283,7 +398,6 @@ static const struct i2c_algorithm bcm_iproc_algo = {
static struct i2c_adapter_quirks bcm_iproc_i2c_quirks = {
/* need to reserve one byte in the FIFO for the slave address */
.max_read_len = M_TX_RX_FIFO_SIZE - 1,
- .max_write_len = M_TX_RX_FIFO_SIZE - 1,
};
static int bcm_iproc_i2c_cfg_speed(struct bcm_iproc_i2c_dev *iproc_i2c)
@@ -321,49 +435,6 @@ static int bcm_iproc_i2c_cfg_speed(struct bcm_iproc_i2c_dev *iproc_i2c)
return 0;
}
-static int bcm_iproc_i2c_init(struct bcm_iproc_i2c_dev *iproc_i2c)
-{
- u32 val;
-
- /* put controller in reset */
- val = readl(iproc_i2c->base + CFG_OFFSET);
- val |= 1 << CFG_RESET_SHIFT;
- val &= ~(1 << CFG_EN_SHIFT);
- writel(val, iproc_i2c->base + CFG_OFFSET);
-
- /* wait 100 usec per spec */
- udelay(100);
-
- /* bring controller out of reset */
- val &= ~(1 << CFG_RESET_SHIFT);
- writel(val, iproc_i2c->base + CFG_OFFSET);
-
- /* flush TX/RX FIFOs and set RX FIFO threshold to zero */
- val = (1 << M_FIFO_RX_FLUSH_SHIFT) | (1 << M_FIFO_TX_FLUSH_SHIFT);
- writel(val, iproc_i2c->base + M_FIFO_CTRL_OFFSET);
-
- /* disable all interrupts */
- writel(0, iproc_i2c->base + IE_OFFSET);
-
- /* clear all pending interrupts */
- writel(0xffffffff, iproc_i2c->base + IS_OFFSET);
-
- return 0;
-}
-
-static void bcm_iproc_i2c_enable_disable(struct bcm_iproc_i2c_dev *iproc_i2c,
- bool enable)
-{
- u32 val;
-
- val = readl(iproc_i2c->base + CFG_OFFSET);
- if (enable)
- val |= BIT(CFG_EN_SHIFT);
- else
- val &= ~BIT(CFG_EN_SHIFT);
- writel(val, iproc_i2c->base + CFG_OFFSET);
-}
-
static int bcm_iproc_i2c_probe(struct platform_device *pdev)
{
int irq, ret = 0;
diff --git a/drivers/i2c/busses/i2c-cadence.c b/drivers/i2c/busses/i2c-cadence.c
index 6b08d1607..90bbd9f9d 100644
--- a/drivers/i2c/busses/i2c-cadence.c
+++ b/drivers/i2c/busses/i2c-cadence.c
@@ -124,6 +124,8 @@
/**
* struct cdns_i2c - I2C device private data structure
+ *
+ * @dev: Pointer to device structure
* @membase: Base address of the I2C device
* @adap: I2C adapter instance
* @p_msg: Message pointer
@@ -171,7 +173,7 @@ struct cdns_platform_data {
clk_rate_change_nb)
/**
- * cdns_i2c_clear_bus_hold() - Clear bus hold bit
+ * cdns_i2c_clear_bus_hold - Clear bus hold bit
* @id: Pointer to driver data struct
*
* Helper to clear the controller's bus hold bit.
@@ -815,8 +817,8 @@ static int cdns_i2c_clk_notifier_cb(struct notifier_block *nb, unsigned long
}
/**
- * cdns_i2c_suspend - Suspend method for the driver
- * @_dev: Address of the platform_device structure
+ * cdns_i2c_runtime_suspend - Runtime suspend method for the driver
+ * @dev: Address of the platform_device structure
*
* Put the driver into low power mode.
*
@@ -833,10 +835,10 @@ static int __maybe_unused cdns_i2c_runtime_suspend(struct device *dev)
}
/**
- * cdns_i2c_resume - Resume from suspend
- * @_dev: Address of the platform_device structure
+ * cdns_i2c_runtime_resume - Runtime resume
+ * @dev: Address of the platform_device structure
*
- * Resume operation after suspend.
+ * Runtime resume callback.
*
* Return: 0 on success and error value on error
*/
diff --git a/drivers/i2c/busses/i2c-designware-baytrail.c b/drivers/i2c/busses/i2c-designware-baytrail.c
index e38c2bbba..1590ad0a8 100644
--- a/drivers/i2c/busses/i2c-designware-baytrail.c
+++ b/drivers/i2c/busses/i2c-designware-baytrail.c
@@ -11,7 +11,6 @@
* FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
* more details.
*/
-#include <linux/module.h>
#include <linux/delay.h>
#include <linux/device.h>
#include <linux/acpi.h>
@@ -151,7 +150,3 @@ int i2c_dw_eval_lock_support(struct dw_i2c_dev *dev)
return 0;
}
-
-MODULE_AUTHOR("David E. Box <david.e.box@linux.intel.com>");
-MODULE_DESCRIPTION("Baytrail I2C Semaphore driver");
-MODULE_LICENSE("GPL v2");
diff --git a/drivers/i2c/busses/i2c-designware-core.c b/drivers/i2c/busses/i2c-designware-core.c
index 10fbd6d84..99b54be6b 100644
--- a/drivers/i2c/busses/i2c-designware-core.c
+++ b/drivers/i2c/busses/i2c-designware-core.c
@@ -634,7 +634,6 @@ i2c_dw_xfer(struct i2c_adapter *adap, struct i2c_msg msgs[], int num)
dev_dbg(dev->dev, "%s: msgs: %d\n", __func__, num);
- mutex_lock(&dev->lock);
pm_runtime_get_sync(dev->dev);
reinit_completion(&dev->cmd_complete);
@@ -673,11 +672,12 @@ i2c_dw_xfer(struct i2c_adapter *adap, struct i2c_msg msgs[], int num)
}
/*
- * We must disable the adapter before unlocking the &dev->lock mutex
- * below. Otherwise the hardware might continue generating interrupts
- * which in turn causes a race condition with the following transfer.
- * Needs some more investigation if the additional interrupts are
- * a hardware bug or this driver doesn't handle them correctly yet.
+ * We must disable the adapter before returning and signaling the end
+ * of the current transfer. Otherwise the hardware might continue
+ * generating interrupts which in turn causes a race condition with
+ * the following transfer. Needs some more investigation if the
+ * additional interrupts are a hardware bug or this driver doesn't
+ * handle them correctly yet.
*/
__i2c_dw_enable(dev, false);
@@ -706,7 +706,6 @@ done:
done_nolock:
pm_runtime_mark_last_busy(dev->dev);
pm_runtime_put_autosuspend(dev->dev);
- mutex_unlock(&dev->lock);
return ret;
}
@@ -860,7 +859,6 @@ int i2c_dw_probe(struct dw_i2c_dev *dev)
int r;
init_completion(&dev->cmd_complete);
- mutex_init(&dev->lock);
r = i2c_dw_init(dev);
if (r)
@@ -883,9 +881,17 @@ int i2c_dw_probe(struct dw_i2c_dev *dev)
return r;
}
+ /*
+ * Increment PM usage count during adapter registration in order to
+ * avoid possible spurious runtime suspend when adapter device is
+ * registered to the device core and immediate resume in case bus has
+ * registered I2C slaves that do I2C transfers in their probe.
+ */
+ pm_runtime_get_noresume(dev->dev);
r = i2c_add_numbered_adapter(adap);
if (r)
dev_err(dev->dev, "failure adding adapter: %d\n", r);
+ pm_runtime_put_noidle(dev->dev);
return r;
}
diff --git a/drivers/i2c/busses/i2c-designware-core.h b/drivers/i2c/busses/i2c-designware-core.h
index 9ffb63a60..cd409e7fb 100644
--- a/drivers/i2c/busses/i2c-designware-core.h
+++ b/drivers/i2c/busses/i2c-designware-core.h
@@ -36,7 +36,6 @@
* @dev: driver model device node
* @base: IO registers pointer
* @cmd_complete: tx completion indicator
- * @lock: protect this struct and IO registers
* @clk: input reference clock
* @cmd_err: run time hadware error code
* @msgs: points to an array of messages currently being transfered
@@ -73,7 +72,6 @@ struct dw_i2c_dev {
struct device *dev;
void __iomem *base;
struct completion cmd_complete;
- struct mutex lock;
struct clk *clk;
u32 (*get_clk_rate_khz) (struct dw_i2c_dev *dev);
struct dw_pci_controller *controller;
diff --git a/drivers/i2c/busses/i2c-designware-platdrv.c b/drivers/i2c/busses/i2c-designware-platdrv.c
index 438f1b496..d656657b8 100644
--- a/drivers/i2c/busses/i2c-designware-platdrv.c
+++ b/drivers/i2c/busses/i2c-designware-platdrv.c
@@ -123,6 +123,7 @@ static const struct acpi_device_id dw_i2c_acpi_match[] = {
{ "80860F41", 0 },
{ "808622C1", 0 },
{ "AMD0010", ACCESS_INTR_MASK },
+ { "AMDI0010", ACCESS_INTR_MASK },
{ "AMDI0510", 0 },
{ "APMC0D0F", 0 },
{ }
diff --git a/drivers/i2c/busses/i2c-i801.c b/drivers/i2c/busses/i2c-i801.c
index 27fa0cb09..585a3b791 100644
--- a/drivers/i2c/busses/i2c-i801.c
+++ b/drivers/i2c/busses/i2c-i801.c
@@ -184,7 +184,7 @@
/* Older devices have their ID defined in <linux/pci_ids.h> */
#define PCI_DEVICE_ID_INTEL_BAYTRAIL_SMBUS 0x0f12
-#define PCI_DEVICE_ID_INTEL_BRASWELL_SMBUS 0x2292
+#define PCI_DEVICE_ID_INTEL_DNV_SMBUS 0x19df
#define PCI_DEVICE_ID_INTEL_COUGARPOINT_SMBUS 0x1c22
#define PCI_DEVICE_ID_INTEL_PATSBURG_SMBUS 0x1d22
/* Patsburg also has three 'Integrated Device Function' SMBus controllers */
@@ -193,9 +193,11 @@
#define PCI_DEVICE_ID_INTEL_PATSBURG_SMBUS_IDF2 0x1d72
#define PCI_DEVICE_ID_INTEL_PANTHERPOINT_SMBUS 0x1e22
#define PCI_DEVICE_ID_INTEL_AVOTON_SMBUS 0x1f3c
+#define PCI_DEVICE_ID_INTEL_BRASWELL_SMBUS 0x2292
#define PCI_DEVICE_ID_INTEL_DH89XXCC_SMBUS 0x2330
#define PCI_DEVICE_ID_INTEL_COLETOCREEK_SMBUS 0x23b0
#define PCI_DEVICE_ID_INTEL_5_3400_SERIES_SMBUS 0x3b30
+#define PCI_DEVICE_ID_INTEL_BROXTON_SMBUS 0x5ad4
#define PCI_DEVICE_ID_INTEL_LYNXPOINT_SMBUS 0x8c22
#define PCI_DEVICE_ID_INTEL_WILDCATPOINT_SMBUS 0x8ca2
#define PCI_DEVICE_ID_INTEL_WELLSBURG_SMBUS 0x8d22
@@ -204,10 +206,8 @@
#define PCI_DEVICE_ID_INTEL_WELLSBURG_SMBUS_MS2 0x8d7f
#define PCI_DEVICE_ID_INTEL_LYNXPOINT_LP_SMBUS 0x9c22
#define PCI_DEVICE_ID_INTEL_WILDCATPOINT_LP_SMBUS 0x9ca2
-#define PCI_DEVICE_ID_INTEL_SUNRISEPOINT_H_SMBUS 0xa123
#define PCI_DEVICE_ID_INTEL_SUNRISEPOINT_LP_SMBUS 0x9d23
-#define PCI_DEVICE_ID_INTEL_DNV_SMBUS 0x19df
-#define PCI_DEVICE_ID_INTEL_BROXTON_SMBUS 0x5ad4
+#define PCI_DEVICE_ID_INTEL_SUNRISEPOINT_H_SMBUS 0xa123
#define PCI_DEVICE_ID_INTEL_LEWISBURG_SMBUS 0xa1a3
#define PCI_DEVICE_ID_INTEL_LEWISBURG_SSKU_SMBUS 0xa223
diff --git a/drivers/i2c/busses/i2c-imx.c b/drivers/i2c/busses/i2c-imx.c
index a2b132cef..1ca7ef231 100644
--- a/drivers/i2c/busses/i2c-imx.c
+++ b/drivers/i2c/busses/i2c-imx.c
@@ -212,7 +212,7 @@ struct imx_i2c_struct {
struct imx_i2c_dma *dma;
};
-static const struct imx_i2c_hwdata imx1_i2c_hwdata = {
+static const struct imx_i2c_hwdata imx1_i2c_hwdata = {
.devtype = IMX1_I2C,
.regshift = IMX_I2C_REGSHIFT,
.clk_div = imx_i2c_clk_div,
@@ -222,7 +222,7 @@ static const struct imx_i2c_hwdata imx1_i2c_hwdata = {
};
-static const struct imx_i2c_hwdata imx21_i2c_hwdata = {
+static const struct imx_i2c_hwdata imx21_i2c_hwdata = {
.devtype = IMX21_I2C,
.regshift = IMX_I2C_REGSHIFT,
.clk_div = imx_i2c_clk_div,
@@ -871,7 +871,7 @@ static int i2c_imx_read(struct imx_i2c_struct *i2c_imx, struct i2c_msg *msgs, bo
if ((!i) && block_data)
msgs->buf[0] = len;
else
- msgs->buf[i] = imx_i2c_read_reg(i2c_imx, IMX_I2C_I2DR);
+ msgs->buf[i] = imx_i2c_read_reg(i2c_imx, IMX_I2C_I2DR);
dev_dbg(&i2c_imx->adapter.dev,
"<%s> read byte: B%d=0x%X\n",
__func__, i, msgs->buf[i]);
@@ -916,7 +916,7 @@ static int i2c_imx_xfer(struct i2c_adapter *adapter,
temp = imx_i2c_read_reg(i2c_imx, IMX_I2C_I2CR);
temp |= I2CR_RSTA;
imx_i2c_write_reg(temp, i2c_imx, IMX_I2C_I2CR);
- result = i2c_imx_bus_busy(i2c_imx, 1);
+ result = i2c_imx_bus_busy(i2c_imx, 1);
if (result)
goto fail0;
}
@@ -1192,7 +1192,7 @@ static int i2c_imx_remove(struct platform_device *pdev)
#ifdef CONFIG_PM
static int i2c_imx_runtime_suspend(struct device *dev)
{
- struct imx_i2c_struct *i2c_imx = dev_get_drvdata(dev);
+ struct imx_i2c_struct *i2c_imx = dev_get_drvdata(dev);
clk_disable_unprepare(i2c_imx->clk);
@@ -1201,7 +1201,7 @@ static int i2c_imx_runtime_suspend(struct device *dev)
static int i2c_imx_runtime_resume(struct device *dev)
{
- struct imx_i2c_struct *i2c_imx = dev_get_drvdata(dev);
+ struct imx_i2c_struct *i2c_imx = dev_get_drvdata(dev);
int ret;
ret = clk_prepare_enable(i2c_imx->clk);
diff --git a/drivers/i2c/busses/i2c-ismt.c b/drivers/i2c/busses/i2c-ismt.c
index 7ba795b24..1c8707710 100644
--- a/drivers/i2c/busses/i2c-ismt.c
+++ b/drivers/i2c/busses/i2c-ismt.c
@@ -75,6 +75,7 @@
/* PCI DIDs for the Intel SMBus Message Transport (SMT) Devices */
#define PCI_DEVICE_ID_INTEL_S1200_SMT0 0x0c59
#define PCI_DEVICE_ID_INTEL_S1200_SMT1 0x0c5a
+#define PCI_DEVICE_ID_INTEL_DNV_SMT 0x19ac
#define PCI_DEVICE_ID_INTEL_AVOTON_SMT 0x1f15
#define ISMT_DESC_ENTRIES 2 /* number of descriptor entries */
@@ -180,6 +181,7 @@ struct ismt_priv {
static const struct pci_device_id ismt_ids[] = {
{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_S1200_SMT0) },
{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_S1200_SMT1) },
+ { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_DNV_SMT) },
{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_AVOTON_SMT) },
{ 0, }
};
diff --git a/drivers/i2c/busses/i2c-jz4780.c b/drivers/i2c/busses/i2c-jz4780.c
index f325663c2..ba14a863b 100644
--- a/drivers/i2c/busses/i2c-jz4780.c
+++ b/drivers/i2c/busses/i2c-jz4780.c
@@ -771,11 +771,16 @@ static int jz4780_i2c_probe(struct platform_device *pdev)
ret = of_property_read_u32(pdev->dev.of_node, "clock-frequency",
&clk_freq);
if (ret) {
- dev_err(&pdev->dev, "clock-frequency not specified in DT");
+ dev_err(&pdev->dev, "clock-frequency not specified in DT\n");
goto err;
}
i2c->speed = clk_freq / 1000;
+ if (i2c->speed == 0) {
+ ret = -EINVAL;
+ dev_err(&pdev->dev, "clock-frequency minimum is 1000\n");
+ goto err;
+ }
jz4780_i2c_set_speed(i2c);
dev_info(&pdev->dev, "Bus frequency is %d KHz\n", i2c->speed);
diff --git a/drivers/i2c/busses/i2c-mt65xx.c b/drivers/i2c/busses/i2c-mt65xx.c
index aec8e6ce3..453358b4d 100644
--- a/drivers/i2c/busses/i2c-mt65xx.c
+++ b/drivers/i2c/busses/i2c-mt65xx.c
@@ -60,6 +60,7 @@
#define I2C_DMA_INT_FLAG_NONE 0x0000
#define I2C_DMA_CLR_FLAG 0x0000
#define I2C_DMA_HARD_RST 0x0002
+#define I2C_DMA_4G_MODE 0x0001
#define I2C_DEFAULT_SPEED 100000 /* hz */
#define MAX_FS_MODE_SPEED 400000
@@ -88,6 +89,8 @@ enum DMA_REGS_OFFSET {
OFFSET_RX_MEM_ADDR = 0x20,
OFFSET_TX_LEN = 0x24,
OFFSET_RX_LEN = 0x28,
+ OFFSET_TX_4G_MODE = 0x54,
+ OFFSET_RX_4G_MODE = 0x58,
};
enum i2c_trans_st_rs {
@@ -133,6 +136,7 @@ struct mtk_i2c_compatible {
unsigned char dcm: 1;
unsigned char auto_restart: 1;
unsigned char aux_len_reg: 1;
+ unsigned char support_33bits: 1;
};
struct mtk_i2c {
@@ -182,6 +186,7 @@ static const struct mtk_i2c_compatible mt6577_compat = {
.dcm = 1,
.auto_restart = 0,
.aux_len_reg = 0,
+ .support_33bits = 0,
};
static const struct mtk_i2c_compatible mt6589_compat = {
@@ -190,6 +195,7 @@ static const struct mtk_i2c_compatible mt6589_compat = {
.dcm = 0,
.auto_restart = 0,
.aux_len_reg = 0,
+ .support_33bits = 0,
};
static const struct mtk_i2c_compatible mt8173_compat = {
@@ -198,6 +204,7 @@ static const struct mtk_i2c_compatible mt8173_compat = {
.dcm = 1,
.auto_restart = 1,
.aux_len_reg = 1,
+ .support_33bits = 1,
};
static const struct of_device_id mtk_i2c_of_match[] = {
@@ -366,6 +373,11 @@ static int mtk_i2c_set_speed(struct mtk_i2c *i2c, unsigned int parent_clk,
return 0;
}
+static inline u32 mtk_i2c_set_4g_mode(dma_addr_t addr)
+{
+ return (addr & BIT_ULL(32)) ? I2C_DMA_4G_MODE : I2C_DMA_CLR_FLAG;
+}
+
static int mtk_i2c_do_transfer(struct mtk_i2c *i2c, struct i2c_msg *msgs,
int num, int left_num)
{
@@ -373,6 +385,7 @@ static int mtk_i2c_do_transfer(struct mtk_i2c *i2c, struct i2c_msg *msgs,
u16 start_reg;
u16 control_reg;
u16 restart_flag = 0;
+ u32 reg_4g_mode;
dma_addr_t rpaddr = 0;
dma_addr_t wpaddr = 0;
int ret;
@@ -439,6 +452,12 @@ static int mtk_i2c_do_transfer(struct mtk_i2c *i2c, struct i2c_msg *msgs,
msgs->len, DMA_FROM_DEVICE);
if (dma_mapping_error(i2c->dev, rpaddr))
return -ENOMEM;
+
+ if (i2c->dev_comp->support_33bits) {
+ reg_4g_mode = mtk_i2c_set_4g_mode(rpaddr);
+ writel(reg_4g_mode, i2c->pdmabase + OFFSET_RX_4G_MODE);
+ }
+
writel((u32)rpaddr, i2c->pdmabase + OFFSET_RX_MEM_ADDR);
writel(msgs->len, i2c->pdmabase + OFFSET_RX_LEN);
} else if (i2c->op == I2C_MASTER_WR) {
@@ -448,6 +467,12 @@ static int mtk_i2c_do_transfer(struct mtk_i2c *i2c, struct i2c_msg *msgs,
msgs->len, DMA_TO_DEVICE);
if (dma_mapping_error(i2c->dev, wpaddr))
return -ENOMEM;
+
+ if (i2c->dev_comp->support_33bits) {
+ reg_4g_mode = mtk_i2c_set_4g_mode(wpaddr);
+ writel(reg_4g_mode, i2c->pdmabase + OFFSET_TX_4G_MODE);
+ }
+
writel((u32)wpaddr, i2c->pdmabase + OFFSET_TX_MEM_ADDR);
writel(msgs->len, i2c->pdmabase + OFFSET_TX_LEN);
} else {
@@ -465,6 +490,15 @@ static int mtk_i2c_do_transfer(struct mtk_i2c *i2c, struct i2c_msg *msgs,
msgs->len, DMA_TO_DEVICE);
return -ENOMEM;
}
+
+ if (i2c->dev_comp->support_33bits) {
+ reg_4g_mode = mtk_i2c_set_4g_mode(wpaddr);
+ writel(reg_4g_mode, i2c->pdmabase + OFFSET_TX_4G_MODE);
+
+ reg_4g_mode = mtk_i2c_set_4g_mode(rpaddr);
+ writel(reg_4g_mode, i2c->pdmabase + OFFSET_RX_4G_MODE);
+ }
+
writel((u32)wpaddr, i2c->pdmabase + OFFSET_TX_MEM_ADDR);
writel((u32)rpaddr, i2c->pdmabase + OFFSET_RX_MEM_ADDR);
writel(msgs->len, i2c->pdmabase + OFFSET_TX_LEN);
@@ -729,6 +763,14 @@ static int mtk_i2c_probe(struct platform_device *pdev)
return -EINVAL;
}
+ if (i2c->dev_comp->support_33bits) {
+ ret = dma_set_mask(&pdev->dev, DMA_BIT_MASK(33));
+ if (ret) {
+ dev_err(&pdev->dev, "dma_set_mask return error.\n");
+ return ret;
+ }
+ }
+
ret = mtk_i2c_clock_enable(i2c);
if (ret) {
dev_err(&pdev->dev, "clock enable failed!\n");
diff --git a/drivers/i2c/busses/i2c-octeon.c b/drivers/i2c/busses/i2c-octeon.c
index 32914ab42..46fb6c429 100644
--- a/drivers/i2c/busses/i2c-octeon.c
+++ b/drivers/i2c/busses/i2c-octeon.c
@@ -2,7 +2,7 @@
* (C) Copyright 2009-2010
* Nokia Siemens Networks, michael.lawnick.ext@nsn.com
*
- * Portions Copyright (C) 2010, 2011 Cavium Networks, Inc.
+ * Portions Copyright (C) 2010 - 2016 Cavium, Inc.
*
* This is a driver for the i2c adapter in Cavium Networks' OCTEON processors.
*
@@ -26,39 +26,48 @@
#define DRV_NAME "i2c-octeon"
-/* The previous out-of-tree version was implicitly version 1.0. */
-#define DRV_VERSION "2.0"
-
-/* register offsets */
-#define SW_TWSI 0x00
-#define TWSI_INT 0x10
+/* Register offsets */
+#define SW_TWSI 0x00
+#define TWSI_INT 0x10
/* Controller command patterns */
-#define SW_TWSI_V 0x8000000000000000ull
-#define SW_TWSI_EOP_TWSI_DATA 0x0C00000100000000ull
-#define SW_TWSI_EOP_TWSI_CTL 0x0C00000200000000ull
-#define SW_TWSI_EOP_TWSI_CLKCTL 0x0C00000300000000ull
-#define SW_TWSI_EOP_TWSI_STAT 0x0C00000300000000ull
-#define SW_TWSI_EOP_TWSI_RST 0x0C00000700000000ull
-#define SW_TWSI_OP_TWSI_CLK 0x0800000000000000ull
-#define SW_TWSI_R 0x0100000000000000ull
+#define SW_TWSI_V BIT_ULL(63) /* Valid bit */
+#define SW_TWSI_R BIT_ULL(56) /* Result or read bit */
+
+/* Controller opcode word (bits 60:57) */
+#define SW_TWSI_OP_SHIFT 57
+#define SW_TWSI_OP_TWSI_CLK (4ULL << SW_TWSI_OP_SHIFT)
+#define SW_TWSI_OP_EOP (6ULL << SW_TWSI_OP_SHIFT) /* Extended opcode */
+
+/* Controller extended opcode word (bits 34:32) */
+#define SW_TWSI_EOP_SHIFT 32
+#define SW_TWSI_EOP_TWSI_DATA (SW_TWSI_OP_EOP | 1ULL << SW_TWSI_EOP_SHIFT)
+#define SW_TWSI_EOP_TWSI_CTL (SW_TWSI_OP_EOP | 2ULL << SW_TWSI_EOP_SHIFT)
+#define SW_TWSI_EOP_TWSI_CLKCTL (SW_TWSI_OP_EOP | 3ULL << SW_TWSI_EOP_SHIFT)
+#define SW_TWSI_EOP_TWSI_STAT (SW_TWSI_OP_EOP | 3ULL << SW_TWSI_EOP_SHIFT)
+#define SW_TWSI_EOP_TWSI_RST (SW_TWSI_OP_EOP | 7ULL << SW_TWSI_EOP_SHIFT)
/* Controller command and status bits */
-#define TWSI_CTL_CE 0x80
-#define TWSI_CTL_ENAB 0x40
-#define TWSI_CTL_STA 0x20
-#define TWSI_CTL_STP 0x10
-#define TWSI_CTL_IFLG 0x08
-#define TWSI_CTL_AAK 0x04
+#define TWSI_CTL_CE 0x80
+#define TWSI_CTL_ENAB 0x40 /* Bus enable */
+#define TWSI_CTL_STA 0x20 /* Master-mode start, HW clears when done */
+#define TWSI_CTL_STP 0x10 /* Master-mode stop, HW clears when done */
+#define TWSI_CTL_IFLG 0x08 /* HW event, SW writes 0 to ACK */
+#define TWSI_CTL_AAK 0x04 /* Assert ACK */
/* Some status values */
-#define STAT_START 0x08
-#define STAT_RSTART 0x10
-#define STAT_TXADDR_ACK 0x18
-#define STAT_TXDATA_ACK 0x28
-#define STAT_RXADDR_ACK 0x40
-#define STAT_RXDATA_ACK 0x50
-#define STAT_IDLE 0xF8
+#define STAT_START 0x08
+#define STAT_RSTART 0x10
+#define STAT_TXADDR_ACK 0x18
+#define STAT_TXDATA_ACK 0x28
+#define STAT_RXADDR_ACK 0x40
+#define STAT_RXDATA_ACK 0x50
+#define STAT_IDLE 0xF8
+
+/* TWSI_INT values */
+#define TWSI_INT_CORE_EN BIT_ULL(6)
+#define TWSI_INT_SDA_OVR BIT_ULL(8)
+#define TWSI_INT_SCL_OVR BIT_ULL(9)
struct octeon_i2c {
wait_queue_head_t queue;
@@ -66,23 +75,19 @@ struct octeon_i2c {
int irq;
u32 twsi_freq;
int sys_freq;
- resource_size_t twsi_phys;
void __iomem *twsi_base;
- resource_size_t regsize;
struct device *dev;
};
/**
- * octeon_i2c_write_sw - write an I2C core register.
- * @i2c: The struct octeon_i2c.
- * @eop_reg: Register selector.
- * @data: Value to be written.
+ * octeon_i2c_write_sw - write an I2C core register
+ * @i2c: The struct octeon_i2c
+ * @eop_reg: Register selector
+ * @data: Value to be written
*
* The I2C core registers are accessed indirectly via the SW_TWSI CSR.
*/
-static void octeon_i2c_write_sw(struct octeon_i2c *i2c,
- u64 eop_reg,
- u8 data)
+static void octeon_i2c_write_sw(struct octeon_i2c *i2c, u64 eop_reg, u8 data)
{
u64 tmp;
@@ -93,9 +98,9 @@ static void octeon_i2c_write_sw(struct octeon_i2c *i2c,
}
/**
- * octeon_i2c_read_sw - write an I2C core register.
- * @i2c: The struct octeon_i2c.
- * @eop_reg: Register selector.
+ * octeon_i2c_read_sw - read lower bits of an I2C core register
+ * @i2c: The struct octeon_i2c
+ * @eop_reg: Register selector
*
* Returns the data.
*
@@ -115,8 +120,8 @@ static u8 octeon_i2c_read_sw(struct octeon_i2c *i2c, u64 eop_reg)
/**
* octeon_i2c_write_int - write the TWSI_INT register
- * @i2c: The struct octeon_i2c.
- * @data: Value to be written.
+ * @i2c: The struct octeon_i2c
+ * @data: Value to be written
*/
static void octeon_i2c_write_int(struct octeon_i2c *i2c, u64 data)
{
@@ -125,57 +130,52 @@ static void octeon_i2c_write_int(struct octeon_i2c *i2c, u64 data)
}
/**
- * octeon_i2c_int_enable - enable the TS interrupt.
- * @i2c: The struct octeon_i2c.
+ * octeon_i2c_int_enable - enable the CORE interrupt
+ * @i2c: The struct octeon_i2c
*
* The interrupt will be asserted when there is non-STAT_IDLE state in
* the SW_TWSI_EOP_TWSI_STAT register.
*/
static void octeon_i2c_int_enable(struct octeon_i2c *i2c)
{
- octeon_i2c_write_int(i2c, 0x40);
+ octeon_i2c_write_int(i2c, TWSI_INT_CORE_EN);
}
-/**
- * octeon_i2c_int_disable - disable the TS interrupt.
- * @i2c: The struct octeon_i2c.
- */
+/* disable the CORE interrupt */
static void octeon_i2c_int_disable(struct octeon_i2c *i2c)
{
+ /* clear TS/ST/IFLG events */
octeon_i2c_write_int(i2c, 0);
}
/**
- * octeon_i2c_unblock - unblock the bus.
- * @i2c: The struct octeon_i2c.
+ * octeon_i2c_unblock - unblock the bus
+ * @i2c: The struct octeon_i2c
*
- * If there was a reset while a device was driving 0 to bus,
- * bus is blocked. We toggle it free manually by some clock
- * cycles and send a stop.
+ * If there was a reset while a device was driving 0 to bus, bus is blocked.
+ * We toggle it free manually by some clock cycles and send a stop.
*/
static void octeon_i2c_unblock(struct octeon_i2c *i2c)
{
int i;
dev_dbg(i2c->dev, "%s\n", __func__);
+
for (i = 0; i < 9; i++) {
- octeon_i2c_write_int(i2c, 0x0);
+ octeon_i2c_write_int(i2c, 0);
udelay(5);
- octeon_i2c_write_int(i2c, 0x200);
+ octeon_i2c_write_int(i2c, TWSI_INT_SCL_OVR);
udelay(5);
}
- octeon_i2c_write_int(i2c, 0x300);
+ /* hand-crank a STOP */
+ octeon_i2c_write_int(i2c, TWSI_INT_SDA_OVR | TWSI_INT_SCL_OVR);
udelay(5);
- octeon_i2c_write_int(i2c, 0x100);
+ octeon_i2c_write_int(i2c, TWSI_INT_SDA_OVR);
udelay(5);
- octeon_i2c_write_int(i2c, 0x0);
+ octeon_i2c_write_int(i2c, 0);
}
-/**
- * octeon_i2c_isr - the interrupt service routine.
- * @int: The irq, unused.
- * @dev_id: Our struct octeon_i2c.
- */
+/* interrupt service routine */
static irqreturn_t octeon_i2c_isr(int irq, void *dev_id)
{
struct octeon_i2c *i2c = dev_id;
@@ -193,24 +193,20 @@ static int octeon_i2c_test_iflg(struct octeon_i2c *i2c)
}
/**
- * octeon_i2c_wait - wait for the IFLG to be set.
- * @i2c: The struct octeon_i2c.
+ * octeon_i2c_wait - wait for the IFLG to be set
+ * @i2c: The struct octeon_i2c
*
* Returns 0 on success, otherwise a negative errno.
*/
static int octeon_i2c_wait(struct octeon_i2c *i2c)
{
- long result;
+ long time_left;
octeon_i2c_int_enable(i2c);
-
- result = wait_event_timeout(i2c->queue,
- octeon_i2c_test_iflg(i2c),
- i2c->adap.timeout);
-
+ time_left = wait_event_timeout(i2c->queue, octeon_i2c_test_iflg(i2c),
+ i2c->adap.timeout);
octeon_i2c_int_disable(i2c);
-
- if (result == 0) {
+ if (!time_left) {
dev_dbg(i2c->dev, "%s: timeout\n", __func__);
return -ETIMEDOUT;
}
@@ -219,18 +215,18 @@ static int octeon_i2c_wait(struct octeon_i2c *i2c)
}
/**
- * octeon_i2c_start - send START to the bus.
- * @i2c: The struct octeon_i2c.
+ * octeon_i2c_start - send START to the bus
+ * @i2c: The struct octeon_i2c
*
* Returns 0 on success, otherwise a negative errno.
*/
static int octeon_i2c_start(struct octeon_i2c *i2c)
{
- u8 data;
int result;
+ u8 data;
octeon_i2c_write_sw(i2c, SW_TWSI_EOP_TWSI_CTL,
- TWSI_CTL_ENAB | TWSI_CTL_STA);
+ TWSI_CTL_ENAB | TWSI_CTL_STA);
result = octeon_i2c_wait(i2c);
if (result) {
@@ -243,7 +239,6 @@ static int octeon_i2c_start(struct octeon_i2c *i2c)
octeon_i2c_unblock(i2c);
octeon_i2c_write_sw(i2c, SW_TWSI_EOP_TWSI_CTL,
TWSI_CTL_ENAB | TWSI_CTL_STA);
-
result = octeon_i2c_wait(i2c);
}
if (result)
@@ -259,34 +254,19 @@ static int octeon_i2c_start(struct octeon_i2c *i2c)
return 0;
}
-/**
- * octeon_i2c_stop - send STOP to the bus.
- * @i2c: The struct octeon_i2c.
- *
- * Returns 0 on success, otherwise a negative errno.
- */
-static int octeon_i2c_stop(struct octeon_i2c *i2c)
+/* send STOP to the bus */
+static void octeon_i2c_stop(struct octeon_i2c *i2c)
{
- u8 data;
-
octeon_i2c_write_sw(i2c, SW_TWSI_EOP_TWSI_CTL,
TWSI_CTL_ENAB | TWSI_CTL_STP);
-
- data = octeon_i2c_read_sw(i2c, SW_TWSI_EOP_TWSI_STAT);
-
- if (data != STAT_IDLE) {
- dev_err(i2c->dev, "%s: bad status(0x%x)\n", __func__, data);
- return -EIO;
- }
- return 0;
}
/**
- * octeon_i2c_write - send data to the bus.
- * @i2c: The struct octeon_i2c.
- * @target: Target address.
- * @data: Pointer to the data to be sent.
- * @length: Length of the data.
+ * octeon_i2c_write - send data to the bus via low-level controller
+ * @i2c: The struct octeon_i2c
+ * @target: Target address
+ * @data: Pointer to the data to be sent
+ * @length: Length of the data
*
* The address is sent over the bus, then the data.
*
@@ -311,6 +291,7 @@ static int octeon_i2c_write(struct octeon_i2c *i2c, int target,
for (i = 0; i < length; i++) {
tmp = octeon_i2c_read_sw(i2c, SW_TWSI_EOP_TWSI_STAT);
+
if ((tmp != STAT_TXADDR_ACK) && (tmp != STAT_TXDATA_ACK)) {
dev_err(i2c->dev,
"%s: bad status before write (0x%x)\n",
@@ -330,20 +311,21 @@ static int octeon_i2c_write(struct octeon_i2c *i2c, int target,
}
/**
- * octeon_i2c_read - receive data from the bus.
- * @i2c: The struct octeon_i2c.
- * @target: Target address.
- * @data: Pointer to the location to store the datae .
- * @length: Length of the data.
+ * octeon_i2c_read - receive data from the bus via low-level controller
+ * @i2c: The struct octeon_i2c
+ * @target: Target address
+ * @data: Pointer to the location to store the data
+ * @rlength: Length of the data
+ * @recv_len: flag for length byte
*
* The address is sent over the bus, then the data is read.
*
* Returns 0 on success, otherwise a negative errno.
*/
static int octeon_i2c_read(struct octeon_i2c *i2c, int target,
- u8 *data, int length)
+ u8 *data, u16 *rlength, bool recv_len)
{
- int i, result;
+ int i, result, length = *rlength;
u8 tmp;
if (length < 1)
@@ -353,7 +335,7 @@ static int octeon_i2c_read(struct octeon_i2c *i2c, int target,
if (result)
return result;
- octeon_i2c_write_sw(i2c, SW_TWSI_EOP_TWSI_DATA, (target<<1) | 1);
+ octeon_i2c_write_sw(i2c, SW_TWSI_EOP_TWSI_DATA, (target << 1) | 1);
octeon_i2c_write_sw(i2c, SW_TWSI_EOP_TWSI_CTL, TWSI_CTL_ENAB);
result = octeon_i2c_wait(i2c);
@@ -362,6 +344,7 @@ static int octeon_i2c_read(struct octeon_i2c *i2c, int target,
for (i = 0; i < length; i++) {
tmp = octeon_i2c_read_sw(i2c, SW_TWSI_EOP_TWSI_STAT);
+
if ((tmp != STAT_RXDATA_ACK) && (tmp != STAT_RXADDR_ACK)) {
dev_err(i2c->dev,
"%s: bad status before read (0x%x)\n",
@@ -369,52 +352,59 @@ static int octeon_i2c_read(struct octeon_i2c *i2c, int target,
return -EIO;
}
- if (i+1 < length)
+ if (i + 1 < length)
octeon_i2c_write_sw(i2c, SW_TWSI_EOP_TWSI_CTL,
- TWSI_CTL_ENAB | TWSI_CTL_AAK);
+ TWSI_CTL_ENAB | TWSI_CTL_AAK);
else
octeon_i2c_write_sw(i2c, SW_TWSI_EOP_TWSI_CTL,
- TWSI_CTL_ENAB);
+ TWSI_CTL_ENAB);
result = octeon_i2c_wait(i2c);
if (result)
return result;
data[i] = octeon_i2c_read_sw(i2c, SW_TWSI_EOP_TWSI_DATA);
+ if (recv_len && i == 0) {
+ if (data[i] > I2C_SMBUS_BLOCK_MAX + 1) {
+ dev_err(i2c->dev,
+ "%s: read len > I2C_SMBUS_BLOCK_MAX %d\n",
+ __func__, data[i]);
+ return -EPROTO;
+ }
+ length += data[i];
+ }
}
+ *rlength = length;
return 0;
}
/**
- * octeon_i2c_xfer - The driver's master_xfer function.
- * @adap: Pointer to the i2c_adapter structure.
- * @msgs: Pointer to the messages to be processed.
- * @num: Length of the MSGS array.
+ * octeon_i2c_xfer - The driver's master_xfer function
+ * @adap: Pointer to the i2c_adapter structure
+ * @msgs: Pointer to the messages to be processed
+ * @num: Length of the MSGS array
*
- * Returns the number of messages processed, or a negative errno on
- * failure.
+ * Returns the number of messages processed, or a negative errno on failure.
*/
-static int octeon_i2c_xfer(struct i2c_adapter *adap,
- struct i2c_msg *msgs,
+static int octeon_i2c_xfer(struct i2c_adapter *adap, struct i2c_msg *msgs,
int num)
{
- struct i2c_msg *pmsg;
- int i;
- int ret = 0;
struct octeon_i2c *i2c = i2c_get_adapdata(adap);
+ int i, ret = 0;
for (i = 0; ret == 0 && i < num; i++) {
- pmsg = &msgs[i];
+ struct i2c_msg *pmsg = &msgs[i];
+
dev_dbg(i2c->dev,
"Doing %s %d byte(s) to/from 0x%02x - %d of %d messages\n",
pmsg->flags & I2C_M_RD ? "read" : "write",
pmsg->len, pmsg->addr, i + 1, num);
if (pmsg->flags & I2C_M_RD)
ret = octeon_i2c_read(i2c, pmsg->addr, pmsg->buf,
- pmsg->len);
+ &pmsg->len, pmsg->flags & I2C_M_RECV_LEN);
else
ret = octeon_i2c_write(i2c, pmsg->addr, pmsg->buf,
- pmsg->len);
+ pmsg->len);
}
octeon_i2c_stop(i2c);
@@ -423,7 +413,8 @@ static int octeon_i2c_xfer(struct i2c_adapter *adap,
static u32 octeon_i2c_functionality(struct i2c_adapter *adap)
{
- return I2C_FUNC_I2C | I2C_FUNC_SMBUS_EMUL;
+ return I2C_FUNC_I2C | I2C_FUNC_SMBUS_EMUL |
+ I2C_FUNC_SMBUS_READ_BLOCK_DATA | I2C_SMBUS_BLOCK_PROC_CALL;
}
static const struct i2c_algorithm octeon_i2c_algo = {
@@ -438,10 +429,8 @@ static struct i2c_adapter octeon_i2c_ops = {
.timeout = HZ / 50,
};
-/**
- * octeon_i2c_setclock - Calculate and set clock divisors.
- */
-static int octeon_i2c_setclock(struct octeon_i2c *i2c)
+/* calculate and set clock divisors */
+static void octeon_i2c_set_clock(struct octeon_i2c *i2c)
{
int tclk, thp_base, inc, thp_idx, mdiv_idx, ndiv_idx, foscl, diff;
int thp = 0x18, mdiv = 2, ndiv = 0, delta_hz = 1000000;
@@ -449,8 +438,7 @@ static int octeon_i2c_setclock(struct octeon_i2c *i2c)
for (ndiv_idx = 0; ndiv_idx < 8 && delta_hz != 0; ndiv_idx++) {
/*
* An mdiv value of less than 2 seems to not work well
- * with ds1337 RTCs, so we constrain it to larger
- * values.
+ * with ds1337 RTCs, so we constrain it to larger values.
*/
for (mdiv_idx = 15; mdiv_idx >= 2 && delta_hz != 0; mdiv_idx--) {
/*
@@ -460,6 +448,7 @@ static int octeon_i2c_setclock(struct octeon_i2c *i2c)
tclk = i2c->twsi_freq * (mdiv_idx + 1) * 10;
tclk *= (1 << ndiv_idx);
thp_base = (i2c->sys_freq / (tclk * 2)) - 1;
+
for (inc = 0; inc <= 1; inc++) {
thp_idx = thp_base + inc;
if (thp_idx < 5 || thp_idx > 0xff)
@@ -480,11 +469,9 @@ static int octeon_i2c_setclock(struct octeon_i2c *i2c)
}
octeon_i2c_write_sw(i2c, SW_TWSI_OP_TWSI_CLK, thp);
octeon_i2c_write_sw(i2c, SW_TWSI_EOP_TWSI_CLKCTL, (mdiv << 3) | ndiv);
-
- return 0;
}
-static int octeon_i2c_initlowlevel(struct octeon_i2c *i2c)
+static int octeon_i2c_init_lowlevel(struct octeon_i2c *i2c)
{
u8 status;
int tries;
@@ -507,9 +494,10 @@ static int octeon_i2c_initlowlevel(struct octeon_i2c *i2c)
static int octeon_i2c_probe(struct platform_device *pdev)
{
- int irq, result = 0;
- struct octeon_i2c *i2c;
+ struct device_node *node = pdev->dev.of_node;
struct resource *res_mem;
+ struct octeon_i2c *i2c;
+ int irq, result = 0;
/* All adaptors have an irq. */
irq = platform_get_irq(pdev, 0);
@@ -518,31 +506,25 @@ static int octeon_i2c_probe(struct platform_device *pdev)
i2c = devm_kzalloc(&pdev->dev, sizeof(*i2c), GFP_KERNEL);
if (!i2c) {
- dev_err(&pdev->dev, "kzalloc failed\n");
result = -ENOMEM;
goto out;
}
i2c->dev = &pdev->dev;
res_mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-
- if (res_mem == NULL) {
- dev_err(i2c->dev, "found no memory resource\n");
- result = -ENXIO;
+ i2c->twsi_base = devm_ioremap_resource(&pdev->dev, res_mem);
+ if (IS_ERR(i2c->twsi_base)) {
+ result = PTR_ERR(i2c->twsi_base);
goto out;
}
- i2c->twsi_phys = res_mem->start;
- i2c->regsize = resource_size(res_mem);
/*
* "clock-rate" is a legacy binding, the official binding is
* "clock-frequency". Try the official one first and then
* fall back if it doesn't exist.
*/
- if (of_property_read_u32(pdev->dev.of_node,
- "clock-frequency", &i2c->twsi_freq) &&
- of_property_read_u32(pdev->dev.of_node,
- "clock-rate", &i2c->twsi_freq)) {
+ if (of_property_read_u32(node, "clock-frequency", &i2c->twsi_freq) &&
+ of_property_read_u32(node, "clock-rate", &i2c->twsi_freq)) {
dev_err(i2c->dev,
"no I2C 'clock-rate' or 'clock-frequency' property\n");
result = -ENXIO;
@@ -551,13 +533,6 @@ static int octeon_i2c_probe(struct platform_device *pdev)
i2c->sys_freq = octeon_get_io_clock_rate();
- if (!devm_request_mem_region(&pdev->dev, i2c->twsi_phys, i2c->regsize,
- res_mem->name)) {
- dev_err(i2c->dev, "request_mem_region failed\n");
- goto out;
- }
- i2c->twsi_base = devm_ioremap(&pdev->dev, i2c->twsi_phys, i2c->regsize);
-
init_waitqueue_head(&i2c->queue);
i2c->irq = irq;
@@ -569,21 +544,17 @@ static int octeon_i2c_probe(struct platform_device *pdev)
goto out;
}
- result = octeon_i2c_initlowlevel(i2c);
+ result = octeon_i2c_init_lowlevel(i2c);
if (result) {
dev_err(i2c->dev, "init low level failed\n");
goto out;
}
- result = octeon_i2c_setclock(i2c);
- if (result) {
- dev_err(i2c->dev, "clock init failed\n");
- goto out;
- }
+ octeon_i2c_set_clock(i2c);
i2c->adap = octeon_i2c_ops;
i2c->adap.dev.parent = &pdev->dev;
- i2c->adap.dev.of_node = pdev->dev.of_node;
+ i2c->adap.dev.of_node = node;
i2c_set_adapdata(&i2c->adap, i2c);
platform_set_drvdata(pdev, i2c);
@@ -592,8 +563,7 @@ static int octeon_i2c_probe(struct platform_device *pdev)
dev_err(i2c->dev, "failed to add adapter\n");
goto out;
}
- dev_info(i2c->dev, "version %s\n", DRV_VERSION);
-
+ dev_info(i2c->dev, "probed\n");
return 0;
out:
@@ -608,10 +578,8 @@ static int octeon_i2c_remove(struct platform_device *pdev)
return 0;
};
-static struct of_device_id octeon_i2c_match[] = {
- {
- .compatible = "cavium,octeon-3860-twsi",
- },
+static const struct of_device_id octeon_i2c_match[] = {
+ { .compatible = "cavium,octeon-3860-twsi", },
{},
};
MODULE_DEVICE_TABLE(of, octeon_i2c_match);
@@ -630,4 +598,3 @@ module_platform_driver(octeon_i2c_driver);
MODULE_AUTHOR("Michael Lawnick <michael.lawnick.ext@nsn.com>");
MODULE_DESCRIPTION("I2C-Bus adapter for Cavium OCTEON processors");
MODULE_LICENSE("GPL");
-MODULE_VERSION(DRV_VERSION);
diff --git a/drivers/i2c/busses/i2c-piix4.c b/drivers/i2c/busses/i2c-piix4.c
index 93f289538..23d1c167b 100644
--- a/drivers/i2c/busses/i2c-piix4.c
+++ b/drivers/i2c/busses/i2c-piix4.c
@@ -85,8 +85,14 @@
/* SB800 constants */
#define SB800_PIIX4_SMB_IDX 0xcd6
-/* SB800 port is selected by bits 2:1 of the smb_en register (0x2c) */
+/*
+ * SB800 port is selected by bits 2:1 of the smb_en register (0x2c)
+ * or the smb_sel register (0x2e), depending on bit 0 of register 0x2f.
+ * Hudson-2/Bolton port is always selected by bits 2:1 of register 0x2f.
+ */
#define SB800_PIIX4_PORT_IDX 0x2c
+#define SB800_PIIX4_PORT_IDX_ALT 0x2e
+#define SB800_PIIX4_PORT_IDX_SEL 0x2f
#define SB800_PIIX4_PORT_IDX_MASK 0x06
/* insmod parameters */
@@ -136,8 +142,13 @@ static const struct dmi_system_id piix4_dmi_ibm[] = {
{ },
};
-/* SB800 globals */
+/*
+ * SB800 globals
+ * piix4_mutex_sb800 protects piix4_port_sel_sb800 and the pair
+ * of I/O ports at SB800_PIIX4_SMB_IDX.
+ */
static DEFINE_MUTEX(piix4_mutex_sb800);
+static u8 piix4_port_sel_sb800;
static const char *piix4_main_port_names_sb800[PIIX4_MAX_ADAPTERS] = {
" port 0", " port 2", " port 3", " port 4"
};
@@ -148,7 +159,7 @@ struct i2c_piix4_adapdata {
/* SB800 */
bool sb800_main;
- unsigned short port;
+ u8 port; /* Port number, shifted */
};
static int piix4_setup(struct pci_dev *PIIX4_dev,
@@ -254,7 +265,7 @@ static int piix4_setup_sb800(struct pci_dev *PIIX4_dev,
const struct pci_device_id *id, u8 aux)
{
unsigned short piix4_smba;
- u8 smba_en_lo, smba_en_hi, smb_en, smb_en_status;
+ u8 smba_en_lo, smba_en_hi, smb_en, smb_en_status, port_sel;
u8 i2ccfg, i2ccfg_offset = 0x10;
/* SB800 and later SMBus does not support forcing address */
@@ -334,6 +345,23 @@ static int piix4_setup_sb800(struct pci_dev *PIIX4_dev,
"SMBus Host Controller at 0x%x, revision %d\n",
piix4_smba, i2ccfg >> 4);
+ /* Find which register is used for port selection */
+ if (PIIX4_dev->vendor == PCI_VENDOR_ID_AMD) {
+ piix4_port_sel_sb800 = SB800_PIIX4_PORT_IDX_ALT;
+ } else {
+ mutex_lock(&piix4_mutex_sb800);
+ outb_p(SB800_PIIX4_PORT_IDX_SEL, SB800_PIIX4_SMB_IDX);
+ port_sel = inb_p(SB800_PIIX4_SMB_IDX + 1);
+ piix4_port_sel_sb800 = (port_sel & 0x01) ?
+ SB800_PIIX4_PORT_IDX_ALT :
+ SB800_PIIX4_PORT_IDX;
+ mutex_unlock(&piix4_mutex_sb800);
+ }
+
+ dev_info(&PIIX4_dev->dev,
+ "Using register 0x%02x for SMBus port selection\n",
+ (unsigned int)piix4_port_sel_sb800);
+
return piix4_smba;
}
@@ -563,12 +591,12 @@ static s32 piix4_access_sb800(struct i2c_adapter *adap, u16 addr,
mutex_lock(&piix4_mutex_sb800);
- outb_p(SB800_PIIX4_PORT_IDX, SB800_PIIX4_SMB_IDX);
+ outb_p(piix4_port_sel_sb800, SB800_PIIX4_SMB_IDX);
smba_en_lo = inb_p(SB800_PIIX4_SMB_IDX + 1);
port = adapdata->port;
- if ((smba_en_lo & SB800_PIIX4_PORT_IDX_MASK) != (port << 1))
- outb_p((smba_en_lo & ~SB800_PIIX4_PORT_IDX_MASK) | (port << 1),
+ if ((smba_en_lo & SB800_PIIX4_PORT_IDX_MASK) != port)
+ outb_p((smba_en_lo & ~SB800_PIIX4_PORT_IDX_MASK) | port,
SB800_PIIX4_SMB_IDX + 1);
retval = piix4_access(adap, addr, flags, read_write,
@@ -627,7 +655,7 @@ static struct i2c_adapter *piix4_main_adapters[PIIX4_MAX_ADAPTERS];
static struct i2c_adapter *piix4_aux_adapter;
static int piix4_add_adapter(struct pci_dev *dev, unsigned short smba,
- bool sb800_main, unsigned short port,
+ bool sb800_main, u8 port,
const char *name, struct i2c_adapter **padap)
{
struct i2c_adapter *adap;
@@ -654,7 +682,7 @@ static int piix4_add_adapter(struct pci_dev *dev, unsigned short smba,
adapdata->smba = smba;
adapdata->sb800_main = sb800_main;
- adapdata->port = port;
+ adapdata->port = port << 1;
/* set up the sysfs linkage to our parent device */
adap->dev.parent = &dev->dev;
@@ -790,7 +818,7 @@ static void piix4_adap_remove(struct i2c_adapter *adap)
if (adapdata->smba) {
i2c_del_adapter(adap);
- if (adapdata->port == 0) {
+ if (adapdata->port == (0 << 1)) {
release_region(adapdata->smba, SMBIOSIZE);
if (adapdata->sb800_main)
release_region(SB800_PIIX4_SMB_IDX, 2);
diff --git a/drivers/i2c/busses/i2c-qup.c b/drivers/i2c/busses/i2c-qup.c
index fdcbdab80..23eaabb19 100644
--- a/drivers/i2c/busses/i2c-qup.c
+++ b/drivers/i2c/busses/i2c-qup.c
@@ -14,8 +14,12 @@
*
*/
+#include <linux/atomic.h>
#include <linux/clk.h>
#include <linux/delay.h>
+#include <linux/dmaengine.h>
+#include <linux/dmapool.h>
+#include <linux/dma-mapping.h>
#include <linux/err.h>
#include <linux/i2c.h>
#include <linux/interrupt.h>
@@ -24,6 +28,7 @@
#include <linux/of.h>
#include <linux/platform_device.h>
#include <linux/pm_runtime.h>
+#include <linux/scatterlist.h>
/* QUP Registers */
#define QUP_CONFIG 0x000
@@ -33,6 +38,7 @@
#define QUP_OPERATIONAL 0x018
#define QUP_ERROR_FLAGS 0x01c
#define QUP_ERROR_FLAGS_EN 0x020
+#define QUP_OPERATIONAL_MASK 0x028
#define QUP_HW_VERSION 0x030
#define QUP_MX_OUTPUT_CNT 0x100
#define QUP_OUT_FIFO_BASE 0x110
@@ -42,6 +48,7 @@
#define QUP_IN_FIFO_BASE 0x218
#define QUP_I2C_CLK_CTL 0x400
#define QUP_I2C_STATUS 0x404
+#define QUP_I2C_MASTER_GEN 0x408
/* QUP States and reset values */
#define QUP_RESET_STATE 0
@@ -51,6 +58,7 @@
#define QUP_STATE_VALID BIT(2)
#define QUP_I2C_MAST_GEN BIT(4)
+#define QUP_I2C_FLUSH BIT(6)
#define QUP_OPERATIONAL_RESET 0x000ff0
#define QUP_I2C_STATUS_RESET 0xfffffc
@@ -69,16 +77,22 @@
#define QUP_CLOCK_AUTO_GATE BIT(13)
#define I2C_MINI_CORE (2 << 8)
#define I2C_N_VAL 15
+#define I2C_N_VAL_V2 7
+
/* Most significant word offset in FIFO port */
#define QUP_MSW_SHIFT (I2C_N_VAL + 1)
/* Packing/Unpacking words in FIFOs, and IO modes */
#define QUP_OUTPUT_BLK_MODE (1 << 10)
+#define QUP_OUTPUT_BAM_MODE (3 << 10)
#define QUP_INPUT_BLK_MODE (1 << 12)
+#define QUP_INPUT_BAM_MODE (3 << 12)
+#define QUP_BAM_MODE (QUP_OUTPUT_BAM_MODE | QUP_INPUT_BAM_MODE)
#define QUP_UNPACK_EN BIT(14)
#define QUP_PACK_EN BIT(15)
#define QUP_REPACK_EN (QUP_UNPACK_EN | QUP_PACK_EN)
+#define QUP_V2_TAGS_EN 1
#define QUP_OUTPUT_BLOCK_SIZE(x)(((x) >> 0) & 0x03)
#define QUP_OUTPUT_FIFO_SIZE(x) (((x) >> 2) & 0x07)
@@ -90,6 +104,15 @@
#define QUP_TAG_DATA (2 << 8)
#define QUP_TAG_STOP (3 << 8)
#define QUP_TAG_REC (4 << 8)
+#define QUP_BAM_INPUT_EOT 0x93
+#define QUP_BAM_FLUSH_STOP 0x96
+
+/* QUP v2 tags */
+#define QUP_TAG_V2_START 0x81
+#define QUP_TAG_V2_DATAWR 0x82
+#define QUP_TAG_V2_DATAWR_STOP 0x83
+#define QUP_TAG_V2_DATARD 0x85
+#define QUP_TAG_V2_DATARD_STOP 0x87
/* Status, Error flags */
#define I2C_STATUS_WR_BUFFER_FULL BIT(0)
@@ -98,6 +121,36 @@
#define QUP_STATUS_ERROR_FLAGS 0x7c
#define QUP_READ_LIMIT 256
+#define SET_BIT 0x1
+#define RESET_BIT 0x0
+#define ONE_BYTE 0x1
+#define QUP_I2C_MX_CONFIG_DURING_RUN BIT(31)
+
+#define MX_TX_RX_LEN SZ_64K
+#define MX_BLOCKS (MX_TX_RX_LEN / QUP_READ_LIMIT)
+
+/* Max timeout in ms for 32k bytes */
+#define TOUT_MAX 300
+
+struct qup_i2c_block {
+ int count;
+ int pos;
+ int tx_tag_len;
+ int rx_tag_len;
+ int data_len;
+ u8 tags[6];
+};
+
+struct qup_i2c_tag {
+ u8 *start;
+ dma_addr_t addr;
+};
+
+struct qup_i2c_bam {
+ struct qup_i2c_tag tag;
+ struct dma_chan *dma;
+ struct scatterlist *sg;
+};
struct qup_i2c_dev {
struct device *dev;
@@ -114,6 +167,7 @@ struct qup_i2c_dev {
int in_blk_sz;
unsigned long one_byte_t;
+ struct qup_i2c_block blk;
struct i2c_msg *msg;
/* Current posion in user message buffer */
@@ -123,6 +177,19 @@ struct qup_i2c_dev {
/* QUP core errors */
u32 qup_err;
+ /* To check if this is the last msg */
+ bool is_last;
+
+ /* To configure when bus is in run state */
+ int config_run;
+
+ /* dma parameters */
+ bool is_dma;
+ struct dma_pool *dpool;
+ struct qup_i2c_tag start_tag;
+ struct qup_i2c_bam brx;
+ struct qup_i2c_bam btx;
+
struct completion xfer;
};
@@ -199,6 +266,14 @@ static int qup_i2c_poll_state(struct qup_i2c_dev *qup, u32 req_state)
return qup_i2c_poll_state_mask(qup, req_state, QUP_STATE_MASK);
}
+static void qup_i2c_flush(struct qup_i2c_dev *qup)
+{
+ u32 val = readl(qup->base + QUP_STATE);
+
+ val |= QUP_I2C_FLUSH;
+ writel(val, qup->base + QUP_STATE);
+}
+
static int qup_i2c_poll_state_valid(struct qup_i2c_dev *qup)
{
return qup_i2c_poll_state_mask(qup, 0, 0);
@@ -221,26 +296,62 @@ static int qup_i2c_change_state(struct qup_i2c_dev *qup, u32 state)
return 0;
}
-static int qup_i2c_wait_writeready(struct qup_i2c_dev *qup)
+/**
+ * qup_i2c_wait_ready - wait for a give number of bytes in tx/rx path
+ * @qup: The qup_i2c_dev device
+ * @op: The bit/event to wait on
+ * @val: value of the bit to wait on, 0 or 1
+ * @len: The length the bytes to be transferred
+ */
+static int qup_i2c_wait_ready(struct qup_i2c_dev *qup, int op, bool val,
+ int len)
{
unsigned long timeout;
u32 opflags;
u32 status;
+ u32 shift = __ffs(op);
- timeout = jiffies + HZ;
+ len *= qup->one_byte_t;
+ /* timeout after a wait of twice the max time */
+ timeout = jiffies + len * 4;
for (;;) {
opflags = readl(qup->base + QUP_OPERATIONAL);
status = readl(qup->base + QUP_I2C_STATUS);
- if (!(opflags & QUP_OUT_NOT_EMPTY) &&
- !(status & I2C_STATUS_BUS_ACTIVE))
- return 0;
+ if (((opflags & op) >> shift) == val) {
+ if ((op == QUP_OUT_NOT_EMPTY) && qup->is_last) {
+ if (!(status & I2C_STATUS_BUS_ACTIVE))
+ return 0;
+ } else {
+ return 0;
+ }
+ }
if (time_after(jiffies, timeout))
return -ETIMEDOUT;
- usleep_range(qup->one_byte_t, qup->one_byte_t * 2);
+ usleep_range(len, len * 2);
+ }
+}
+
+static void qup_i2c_set_write_mode_v2(struct qup_i2c_dev *qup,
+ struct i2c_msg *msg)
+{
+ /* Number of entries to shift out, including the tags */
+ int total = msg->len + qup->blk.tx_tag_len;
+
+ total |= qup->config_run;
+
+ if (total < qup->out_fifo_sz) {
+ /* FIFO mode */
+ writel(QUP_REPACK_EN, qup->base + QUP_IO_MODE);
+ writel(total, qup->base + QUP_MX_WRITE_CNT);
+ } else {
+ /* BLOCK mode (transfer data on chunks) */
+ writel(QUP_OUTPUT_BLK_MODE | QUP_REPACK_EN,
+ qup->base + QUP_IO_MODE);
+ writel(total, qup->base + QUP_MX_OUTPUT_CNT);
}
}
@@ -261,13 +372,45 @@ static void qup_i2c_set_write_mode(struct qup_i2c_dev *qup, struct i2c_msg *msg)
}
}
-static void qup_i2c_issue_write(struct qup_i2c_dev *qup, struct i2c_msg *msg)
+static int check_for_fifo_space(struct qup_i2c_dev *qup)
+{
+ int ret;
+
+ ret = qup_i2c_change_state(qup, QUP_PAUSE_STATE);
+ if (ret)
+ goto out;
+
+ ret = qup_i2c_wait_ready(qup, QUP_OUT_FULL,
+ RESET_BIT, 4 * ONE_BYTE);
+ if (ret) {
+ /* Fifo is full. Drain out the fifo */
+ ret = qup_i2c_change_state(qup, QUP_RUN_STATE);
+ if (ret)
+ goto out;
+
+ ret = qup_i2c_wait_ready(qup, QUP_OUT_NOT_EMPTY,
+ RESET_BIT, 256 * ONE_BYTE);
+ if (ret) {
+ dev_err(qup->dev, "timeout for fifo out full");
+ goto out;
+ }
+
+ ret = qup_i2c_change_state(qup, QUP_PAUSE_STATE);
+ if (ret)
+ goto out;
+ }
+
+out:
+ return ret;
+}
+
+static int qup_i2c_issue_write(struct qup_i2c_dev *qup, struct i2c_msg *msg)
{
u32 addr = msg->addr << 1;
u32 qup_tag;
- u32 opflags;
int idx;
u32 val;
+ int ret = 0;
if (qup->pos == 0) {
val = QUP_TAG_START | addr;
@@ -279,9 +422,9 @@ static void qup_i2c_issue_write(struct qup_i2c_dev *qup, struct i2c_msg *msg)
while (qup->pos < msg->len) {
/* Check that there's space in the FIFO for our pair */
- opflags = readl(qup->base + QUP_OPERATIONAL);
- if (opflags & QUP_OUT_FULL)
- break;
+ ret = check_for_fifo_space(qup);
+ if (ret)
+ return ret;
if (qup->pos == msg->len - 1)
qup_tag = QUP_TAG_STOP;
@@ -300,11 +443,501 @@ static void qup_i2c_issue_write(struct qup_i2c_dev *qup, struct i2c_msg *msg)
qup->pos++;
idx++;
}
+
+ ret = qup_i2c_change_state(qup, QUP_RUN_STATE);
+
+ return ret;
}
-static int qup_i2c_write_one(struct qup_i2c_dev *qup, struct i2c_msg *msg)
+static void qup_i2c_set_blk_data(struct qup_i2c_dev *qup,
+ struct i2c_msg *msg)
+{
+ memset(&qup->blk, 0, sizeof(qup->blk));
+
+ qup->blk.data_len = msg->len;
+ qup->blk.count = (msg->len + QUP_READ_LIMIT - 1) / QUP_READ_LIMIT;
+
+ /* 4 bytes for first block and 2 writes for rest */
+ qup->blk.tx_tag_len = 4 + (qup->blk.count - 1) * 2;
+
+ /* There are 2 tag bytes that are read in to fifo for every block */
+ if (msg->flags & I2C_M_RD)
+ qup->blk.rx_tag_len = qup->blk.count * 2;
+}
+
+static int qup_i2c_send_data(struct qup_i2c_dev *qup, int tlen, u8 *tbuf,
+ int dlen, u8 *dbuf)
+{
+ u32 val = 0, idx = 0, pos = 0, i = 0, t;
+ int len = tlen + dlen;
+ u8 *buf = tbuf;
+ int ret = 0;
+
+ while (len > 0) {
+ ret = check_for_fifo_space(qup);
+ if (ret)
+ return ret;
+
+ t = (len >= 4) ? 4 : len;
+
+ while (idx < t) {
+ if (!i && (pos >= tlen)) {
+ buf = dbuf;
+ pos = 0;
+ i = 1;
+ }
+ val |= buf[pos++] << (idx++ * 8);
+ }
+
+ writel(val, qup->base + QUP_OUT_FIFO_BASE);
+ idx = 0;
+ val = 0;
+ len -= 4;
+ }
+
+ ret = qup_i2c_change_state(qup, QUP_RUN_STATE);
+
+ return ret;
+}
+
+static int qup_i2c_get_data_len(struct qup_i2c_dev *qup)
+{
+ int data_len;
+
+ if (qup->blk.data_len > QUP_READ_LIMIT)
+ data_len = QUP_READ_LIMIT;
+ else
+ data_len = qup->blk.data_len;
+
+ return data_len;
+}
+
+static int qup_i2c_set_tags(u8 *tags, struct qup_i2c_dev *qup,
+ struct i2c_msg *msg, int is_dma)
+{
+ u16 addr = (msg->addr << 1) | ((msg->flags & I2C_M_RD) == I2C_M_RD);
+ int len = 0;
+ int data_len;
+
+ int last = (qup->blk.pos == (qup->blk.count - 1)) && (qup->is_last);
+
+ if (qup->blk.pos == 0) {
+ tags[len++] = QUP_TAG_V2_START;
+ tags[len++] = addr & 0xff;
+
+ if (msg->flags & I2C_M_TEN)
+ tags[len++] = addr >> 8;
+ }
+
+ /* Send _STOP commands for the last block */
+ if (last) {
+ if (msg->flags & I2C_M_RD)
+ tags[len++] = QUP_TAG_V2_DATARD_STOP;
+ else
+ tags[len++] = QUP_TAG_V2_DATAWR_STOP;
+ } else {
+ if (msg->flags & I2C_M_RD)
+ tags[len++] = QUP_TAG_V2_DATARD;
+ else
+ tags[len++] = QUP_TAG_V2_DATAWR;
+ }
+
+ data_len = qup_i2c_get_data_len(qup);
+
+ /* 0 implies 256 bytes */
+ if (data_len == QUP_READ_LIMIT)
+ tags[len++] = 0;
+ else
+ tags[len++] = data_len;
+
+ if ((msg->flags & I2C_M_RD) && last && is_dma) {
+ tags[len++] = QUP_BAM_INPUT_EOT;
+ tags[len++] = QUP_BAM_FLUSH_STOP;
+ }
+
+ return len;
+}
+
+static int qup_i2c_issue_xfer_v2(struct qup_i2c_dev *qup, struct i2c_msg *msg)
+{
+ int data_len = 0, tag_len, index;
+ int ret;
+
+ tag_len = qup_i2c_set_tags(qup->blk.tags, qup, msg, 0);
+ index = msg->len - qup->blk.data_len;
+
+ /* only tags are written for read */
+ if (!(msg->flags & I2C_M_RD))
+ data_len = qup_i2c_get_data_len(qup);
+
+ ret = qup_i2c_send_data(qup, tag_len, qup->blk.tags,
+ data_len, &msg->buf[index]);
+ qup->blk.data_len -= data_len;
+
+ return ret;
+}
+
+static void qup_i2c_bam_cb(void *data)
+{
+ struct qup_i2c_dev *qup = data;
+
+ complete(&qup->xfer);
+}
+
+static int qup_sg_set_buf(struct scatterlist *sg, void *buf,
+ struct qup_i2c_tag *tg, unsigned int buflen,
+ struct qup_i2c_dev *qup, int map, int dir)
+{
+ int ret;
+
+ sg_set_buf(sg, buf, buflen);
+ ret = dma_map_sg(qup->dev, sg, 1, dir);
+ if (!ret)
+ return -EINVAL;
+
+ if (!map)
+ sg_dma_address(sg) = tg->addr + ((u8 *)buf - tg->start);
+
+ return 0;
+}
+
+static void qup_i2c_rel_dma(struct qup_i2c_dev *qup)
+{
+ if (qup->btx.dma)
+ dma_release_channel(qup->btx.dma);
+ if (qup->brx.dma)
+ dma_release_channel(qup->brx.dma);
+ qup->btx.dma = NULL;
+ qup->brx.dma = NULL;
+}
+
+static int qup_i2c_req_dma(struct qup_i2c_dev *qup)
+{
+ int err;
+
+ if (!qup->btx.dma) {
+ qup->btx.dma = dma_request_slave_channel_reason(qup->dev, "tx");
+ if (IS_ERR(qup->btx.dma)) {
+ err = PTR_ERR(qup->btx.dma);
+ qup->btx.dma = NULL;
+ dev_err(qup->dev, "\n tx channel not available");
+ return err;
+ }
+ }
+
+ if (!qup->brx.dma) {
+ qup->brx.dma = dma_request_slave_channel_reason(qup->dev, "rx");
+ if (IS_ERR(qup->brx.dma)) {
+ dev_err(qup->dev, "\n rx channel not available");
+ err = PTR_ERR(qup->brx.dma);
+ qup->brx.dma = NULL;
+ qup_i2c_rel_dma(qup);
+ return err;
+ }
+ }
+ return 0;
+}
+
+static int qup_i2c_bam_do_xfer(struct qup_i2c_dev *qup, struct i2c_msg *msg,
+ int num)
+{
+ struct dma_async_tx_descriptor *txd, *rxd = NULL;
+ int ret = 0, idx = 0, limit = QUP_READ_LIMIT;
+ dma_cookie_t cookie_rx, cookie_tx;
+ u32 rx_nents = 0, tx_nents = 0, len, blocks, rem;
+ u32 i, tlen, tx_len, tx_buf = 0, rx_buf = 0, off = 0;
+ u8 *tags;
+
+ while (idx < num) {
+ blocks = (msg->len + limit) / limit;
+ rem = msg->len % limit;
+ tx_len = 0, len = 0, i = 0;
+
+ qup->is_last = (idx == (num - 1));
+
+ qup_i2c_set_blk_data(qup, msg);
+
+ if (msg->flags & I2C_M_RD) {
+ rx_nents += (blocks * 2) + 1;
+ tx_nents += 1;
+
+ while (qup->blk.pos < blocks) {
+ /* length set to '0' implies 256 bytes */
+ tlen = (i == (blocks - 1)) ? rem : 0;
+ tags = &qup->start_tag.start[off + len];
+ len += qup_i2c_set_tags(tags, qup, msg, 1);
+
+ /* scratch buf to read the start and len tags */
+ ret = qup_sg_set_buf(&qup->brx.sg[rx_buf++],
+ &qup->brx.tag.start[0],
+ &qup->brx.tag,
+ 2, qup, 0, 0);
+
+ if (ret)
+ return ret;
+
+ ret = qup_sg_set_buf(&qup->brx.sg[rx_buf++],
+ &msg->buf[limit * i],
+ NULL, tlen, qup,
+ 1, DMA_FROM_DEVICE);
+ if (ret)
+ return ret;
+
+ i++;
+ qup->blk.pos = i;
+ }
+ ret = qup_sg_set_buf(&qup->btx.sg[tx_buf++],
+ &qup->start_tag.start[off],
+ &qup->start_tag, len, qup, 0, 0);
+ if (ret)
+ return ret;
+
+ off += len;
+ /* scratch buf to read the BAM EOT and FLUSH tags */
+ ret = qup_sg_set_buf(&qup->brx.sg[rx_buf++],
+ &qup->brx.tag.start[0],
+ &qup->brx.tag, 2,
+ qup, 0, 0);
+ if (ret)
+ return ret;
+ } else {
+ tx_nents += (blocks * 2);
+
+ while (qup->blk.pos < blocks) {
+ tlen = (i == (blocks - 1)) ? rem : 0;
+ tags = &qup->start_tag.start[off + tx_len];
+ len = qup_i2c_set_tags(tags, qup, msg, 1);
+
+ ret = qup_sg_set_buf(&qup->btx.sg[tx_buf++],
+ tags,
+ &qup->start_tag, len,
+ qup, 0, 0);
+ if (ret)
+ return ret;
+
+ tx_len += len;
+ ret = qup_sg_set_buf(&qup->btx.sg[tx_buf++],
+ &msg->buf[limit * i],
+ NULL, tlen, qup, 1,
+ DMA_TO_DEVICE);
+ if (ret)
+ return ret;
+ i++;
+ qup->blk.pos = i;
+ }
+ off += tx_len;
+
+ if (idx == (num - 1)) {
+ len = 1;
+ if (rx_nents) {
+ qup->btx.tag.start[0] =
+ QUP_BAM_INPUT_EOT;
+ len++;
+ }
+ qup->btx.tag.start[len - 1] =
+ QUP_BAM_FLUSH_STOP;
+ ret = qup_sg_set_buf(&qup->btx.sg[tx_buf++],
+ &qup->btx.tag.start[0],
+ &qup->btx.tag, len,
+ qup, 0, 0);
+ if (ret)
+ return ret;
+ tx_nents += 1;
+ }
+ }
+ idx++;
+ msg++;
+ }
+
+ txd = dmaengine_prep_slave_sg(qup->btx.dma, qup->btx.sg, tx_nents,
+ DMA_MEM_TO_DEV,
+ DMA_PREP_INTERRUPT | DMA_PREP_FENCE);
+ if (!txd) {
+ dev_err(qup->dev, "failed to get tx desc\n");
+ ret = -EINVAL;
+ goto desc_err;
+ }
+
+ if (!rx_nents) {
+ txd->callback = qup_i2c_bam_cb;
+ txd->callback_param = qup;
+ }
+
+ cookie_tx = dmaengine_submit(txd);
+ if (dma_submit_error(cookie_tx)) {
+ ret = -EINVAL;
+ goto desc_err;
+ }
+
+ dma_async_issue_pending(qup->btx.dma);
+
+ if (rx_nents) {
+ rxd = dmaengine_prep_slave_sg(qup->brx.dma, qup->brx.sg,
+ rx_nents, DMA_DEV_TO_MEM,
+ DMA_PREP_INTERRUPT);
+ if (!rxd) {
+ dev_err(qup->dev, "failed to get rx desc\n");
+ ret = -EINVAL;
+
+ /* abort TX descriptors */
+ dmaengine_terminate_all(qup->btx.dma);
+ goto desc_err;
+ }
+
+ rxd->callback = qup_i2c_bam_cb;
+ rxd->callback_param = qup;
+ cookie_rx = dmaengine_submit(rxd);
+ if (dma_submit_error(cookie_rx)) {
+ ret = -EINVAL;
+ goto desc_err;
+ }
+
+ dma_async_issue_pending(qup->brx.dma);
+ }
+
+ if (!wait_for_completion_timeout(&qup->xfer, TOUT_MAX * HZ)) {
+ dev_err(qup->dev, "normal trans timed out\n");
+ ret = -ETIMEDOUT;
+ }
+
+ if (ret || qup->bus_err || qup->qup_err) {
+ if (qup->bus_err & QUP_I2C_NACK_FLAG) {
+ msg--;
+ dev_err(qup->dev, "NACK from %x\n", msg->addr);
+ ret = -EIO;
+
+ if (qup_i2c_change_state(qup, QUP_RUN_STATE)) {
+ dev_err(qup->dev, "change to run state timed out");
+ return ret;
+ }
+
+ if (rx_nents)
+ writel(QUP_BAM_INPUT_EOT,
+ qup->base + QUP_OUT_FIFO_BASE);
+
+ writel(QUP_BAM_FLUSH_STOP,
+ qup->base + QUP_OUT_FIFO_BASE);
+
+ qup_i2c_flush(qup);
+
+ /* wait for remaining interrupts to occur */
+ if (!wait_for_completion_timeout(&qup->xfer, HZ))
+ dev_err(qup->dev, "flush timed out\n");
+
+ qup_i2c_rel_dma(qup);
+ }
+ }
+
+ dma_unmap_sg(qup->dev, qup->btx.sg, tx_nents, DMA_TO_DEVICE);
+
+ if (rx_nents)
+ dma_unmap_sg(qup->dev, qup->brx.sg, rx_nents,
+ DMA_FROM_DEVICE);
+desc_err:
+ return ret;
+}
+
+static int qup_i2c_bam_xfer(struct i2c_adapter *adap, struct i2c_msg *msg,
+ int num)
+{
+ struct qup_i2c_dev *qup = i2c_get_adapdata(adap);
+ int ret = 0;
+
+ enable_irq(qup->irq);
+ ret = qup_i2c_req_dma(qup);
+
+ if (ret)
+ goto out;
+
+ qup->bus_err = 0;
+ qup->qup_err = 0;
+
+ writel(0, qup->base + QUP_MX_INPUT_CNT);
+ writel(0, qup->base + QUP_MX_OUTPUT_CNT);
+
+ /* set BAM mode */
+ writel(QUP_REPACK_EN | QUP_BAM_MODE, qup->base + QUP_IO_MODE);
+
+ /* mask fifo irqs */
+ writel((0x3 << 8), qup->base + QUP_OPERATIONAL_MASK);
+
+ /* set RUN STATE */
+ ret = qup_i2c_change_state(qup, QUP_RUN_STATE);
+ if (ret)
+ goto out;
+
+ writel(qup->clk_ctl, qup->base + QUP_I2C_CLK_CTL);
+
+ qup->msg = msg;
+ ret = qup_i2c_bam_do_xfer(qup, qup->msg, num);
+out:
+ disable_irq(qup->irq);
+
+ qup->msg = NULL;
+ return ret;
+}
+
+static int qup_i2c_wait_for_complete(struct qup_i2c_dev *qup,
+ struct i2c_msg *msg)
{
unsigned long left;
+ int ret = 0;
+
+ left = wait_for_completion_timeout(&qup->xfer, HZ);
+ if (!left) {
+ writel(1, qup->base + QUP_SW_RESET);
+ ret = -ETIMEDOUT;
+ }
+
+ if (qup->bus_err || qup->qup_err) {
+ if (qup->bus_err & QUP_I2C_NACK_FLAG) {
+ dev_err(qup->dev, "NACK from %x\n", msg->addr);
+ ret = -EIO;
+ }
+ }
+
+ return ret;
+}
+
+static int qup_i2c_write_one_v2(struct qup_i2c_dev *qup, struct i2c_msg *msg)
+{
+ int ret = 0;
+
+ qup->msg = msg;
+ qup->pos = 0;
+ enable_irq(qup->irq);
+ qup_i2c_set_blk_data(qup, msg);
+ qup_i2c_set_write_mode_v2(qup, msg);
+
+ ret = qup_i2c_change_state(qup, QUP_RUN_STATE);
+ if (ret)
+ goto err;
+
+ writel(qup->clk_ctl, qup->base + QUP_I2C_CLK_CTL);
+
+ do {
+ ret = qup_i2c_issue_xfer_v2(qup, msg);
+ if (ret)
+ goto err;
+
+ ret = qup_i2c_wait_for_complete(qup, msg);
+ if (ret)
+ goto err;
+
+ qup->blk.pos++;
+ } while (qup->blk.pos < qup->blk.count);
+
+ ret = qup_i2c_wait_ready(qup, QUP_OUT_NOT_EMPTY, RESET_BIT, ONE_BYTE);
+
+err:
+ disable_irq(qup->irq);
+ qup->msg = NULL;
+
+ return ret;
+}
+
+static int qup_i2c_write_one(struct qup_i2c_dev *qup, struct i2c_msg *msg)
+{
int ret;
qup->msg = msg;
@@ -325,30 +958,21 @@ static int qup_i2c_write_one(struct qup_i2c_dev *qup, struct i2c_msg *msg)
if (ret)
goto err;
- qup_i2c_issue_write(qup, msg);
-
- ret = qup_i2c_change_state(qup, QUP_RUN_STATE);
+ ret = qup_i2c_issue_write(qup, msg);
if (ret)
goto err;
- left = wait_for_completion_timeout(&qup->xfer, HZ);
- if (!left) {
- writel(1, qup->base + QUP_SW_RESET);
- ret = -ETIMEDOUT;
+ ret = qup_i2c_change_state(qup, QUP_RUN_STATE);
+ if (ret)
goto err;
- }
- if (qup->bus_err || qup->qup_err) {
- if (qup->bus_err & QUP_I2C_NACK_FLAG)
- dev_err(qup->dev, "NACK from %x\n", msg->addr);
- ret = -EIO;
+ ret = qup_i2c_wait_for_complete(qup, msg);
+ if (ret)
goto err;
- }
} while (qup->pos < msg->len);
/* Wait for the outstanding data in the fifo to drain */
- ret = qup_i2c_wait_writeready(qup);
-
+ ret = qup_i2c_wait_ready(qup, QUP_OUT_NOT_EMPTY, RESET_BIT, ONE_BYTE);
err:
disable_irq(qup->irq);
qup->msg = NULL;
@@ -370,6 +994,28 @@ static void qup_i2c_set_read_mode(struct qup_i2c_dev *qup, int len)
}
}
+static void qup_i2c_set_read_mode_v2(struct qup_i2c_dev *qup, int len)
+{
+ int tx_len = qup->blk.tx_tag_len;
+
+ len += qup->blk.rx_tag_len;
+ len |= qup->config_run;
+ tx_len |= qup->config_run;
+
+ if (len < qup->in_fifo_sz) {
+ /* FIFO mode */
+ writel(QUP_REPACK_EN, qup->base + QUP_IO_MODE);
+ writel(tx_len, qup->base + QUP_MX_WRITE_CNT);
+ writel(len, qup->base + QUP_MX_READ_CNT);
+ } else {
+ /* BLOCK mode (transfer data on chunks) */
+ writel(QUP_INPUT_BLK_MODE | QUP_REPACK_EN,
+ qup->base + QUP_IO_MODE);
+ writel(tx_len, qup->base + QUP_MX_OUTPUT_CNT);
+ writel(len, qup->base + QUP_MX_INPUT_CNT);
+ }
+}
+
static void qup_i2c_issue_read(struct qup_i2c_dev *qup, struct i2c_msg *msg)
{
u32 addr, len, val;
@@ -384,18 +1030,19 @@ static void qup_i2c_issue_read(struct qup_i2c_dev *qup, struct i2c_msg *msg)
}
-static void qup_i2c_read_fifo(struct qup_i2c_dev *qup, struct i2c_msg *msg)
+static int qup_i2c_read_fifo(struct qup_i2c_dev *qup, struct i2c_msg *msg)
{
- u32 opflags;
u32 val = 0;
int idx;
+ int ret = 0;
for (idx = 0; qup->pos < msg->len; idx++) {
if ((idx & 1) == 0) {
/* Check that FIFO have data */
- opflags = readl(qup->base + QUP_OPERATIONAL);
- if (!(opflags & QUP_IN_NOT_EMPTY))
- break;
+ ret = qup_i2c_wait_ready(qup, QUP_IN_NOT_EMPTY,
+ SET_BIT, 4 * ONE_BYTE);
+ if (ret)
+ return ret;
/* Reading 2 words at time */
val = readl(qup->base + QUP_IN_FIFO_BASE);
@@ -405,18 +1052,94 @@ static void qup_i2c_read_fifo(struct qup_i2c_dev *qup, struct i2c_msg *msg)
msg->buf[qup->pos++] = val >> QUP_MSW_SHIFT;
}
}
+
+ return ret;
+}
+
+static int qup_i2c_read_fifo_v2(struct qup_i2c_dev *qup,
+ struct i2c_msg *msg)
+{
+ u32 val;
+ int idx, pos = 0, ret = 0, total;
+
+ total = qup_i2c_get_data_len(qup);
+
+ /* 2 extra bytes for read tags */
+ while (pos < (total + 2)) {
+ /* Check that FIFO have data */
+ ret = qup_i2c_wait_ready(qup, QUP_IN_NOT_EMPTY,
+ SET_BIT, 4 * ONE_BYTE);
+ if (ret) {
+ dev_err(qup->dev, "timeout for fifo not empty");
+ return ret;
+ }
+ val = readl(qup->base + QUP_IN_FIFO_BASE);
+
+ for (idx = 0; idx < 4; idx++, val >>= 8, pos++) {
+ /* first 2 bytes are tag bytes */
+ if (pos < 2)
+ continue;
+
+ if (pos >= (total + 2))
+ goto out;
+
+ msg->buf[qup->pos++] = val & 0xff;
+ }
+ }
+
+out:
+ qup->blk.data_len -= total;
+
+ return ret;
+}
+
+static int qup_i2c_read_one_v2(struct qup_i2c_dev *qup, struct i2c_msg *msg)
+{
+ int ret = 0;
+
+ qup->msg = msg;
+ qup->pos = 0;
+ enable_irq(qup->irq);
+ qup_i2c_set_blk_data(qup, msg);
+ qup_i2c_set_read_mode_v2(qup, msg->len);
+
+ ret = qup_i2c_change_state(qup, QUP_RUN_STATE);
+ if (ret)
+ goto err;
+
+ writel(qup->clk_ctl, qup->base + QUP_I2C_CLK_CTL);
+
+ do {
+ ret = qup_i2c_issue_xfer_v2(qup, msg);
+ if (ret)
+ goto err;
+
+ ret = qup_i2c_wait_for_complete(qup, msg);
+ if (ret)
+ goto err;
+
+ ret = qup_i2c_read_fifo_v2(qup, msg);
+ if (ret)
+ goto err;
+
+ qup->blk.pos++;
+ } while (qup->blk.pos < qup->blk.count);
+
+err:
+ disable_irq(qup->irq);
+ qup->msg = NULL;
+
+ return ret;
}
static int qup_i2c_read_one(struct qup_i2c_dev *qup, struct i2c_msg *msg)
{
- unsigned long left;
int ret;
qup->msg = msg;
qup->pos = 0;
enable_irq(qup->irq);
-
qup_i2c_set_read_mode(qup, msg->len);
ret = qup_i2c_change_state(qup, QUP_RUN_STATE);
@@ -436,21 +1159,13 @@ static int qup_i2c_read_one(struct qup_i2c_dev *qup, struct i2c_msg *msg)
goto err;
do {
- left = wait_for_completion_timeout(&qup->xfer, HZ);
- if (!left) {
- writel(1, qup->base + QUP_SW_RESET);
- ret = -ETIMEDOUT;
+ ret = qup_i2c_wait_for_complete(qup, msg);
+ if (ret)
goto err;
- }
- if (qup->bus_err || qup->qup_err) {
- if (qup->bus_err & QUP_I2C_NACK_FLAG)
- dev_err(qup->dev, "NACK from %x\n", msg->addr);
- ret = -EIO;
+ ret = qup_i2c_read_fifo(qup, msg);
+ if (ret)
goto err;
- }
-
- qup_i2c_read_fifo(qup, msg);
} while (qup->pos < msg->len);
err:
@@ -513,6 +1228,87 @@ out:
return ret;
}
+static int qup_i2c_xfer_v2(struct i2c_adapter *adap,
+ struct i2c_msg msgs[],
+ int num)
+{
+ struct qup_i2c_dev *qup = i2c_get_adapdata(adap);
+ int ret, len, idx = 0, use_dma = 0;
+
+ ret = pm_runtime_get_sync(qup->dev);
+ if (ret < 0)
+ goto out;
+
+ writel(1, qup->base + QUP_SW_RESET);
+ ret = qup_i2c_poll_state(qup, QUP_RESET_STATE);
+ if (ret)
+ goto out;
+
+ /* Configure QUP as I2C mini core */
+ writel(I2C_MINI_CORE | I2C_N_VAL_V2, qup->base + QUP_CONFIG);
+ writel(QUP_V2_TAGS_EN, qup->base + QUP_I2C_MASTER_GEN);
+
+ if ((qup->is_dma)) {
+ /* All i2c_msgs should be transferred using either dma or cpu */
+ for (idx = 0; idx < num; idx++) {
+ if (msgs[idx].len == 0) {
+ ret = -EINVAL;
+ goto out;
+ }
+
+ len = (msgs[idx].len > qup->out_fifo_sz) ||
+ (msgs[idx].len > qup->in_fifo_sz);
+
+ if ((!is_vmalloc_addr(msgs[idx].buf)) && len) {
+ use_dma = 1;
+ } else {
+ use_dma = 0;
+ break;
+ }
+ }
+ }
+
+ do {
+ if (msgs[idx].len == 0) {
+ ret = -EINVAL;
+ goto out;
+ }
+
+ if (qup_i2c_poll_state_i2c_master(qup)) {
+ ret = -EIO;
+ goto out;
+ }
+
+ qup->is_last = (idx == (num - 1));
+ if (idx)
+ qup->config_run = QUP_I2C_MX_CONFIG_DURING_RUN;
+ else
+ qup->config_run = 0;
+
+ reinit_completion(&qup->xfer);
+
+ if (use_dma) {
+ ret = qup_i2c_bam_xfer(adap, &msgs[idx], num);
+ } else {
+ if (msgs[idx].flags & I2C_M_RD)
+ ret = qup_i2c_read_one_v2(qup, &msgs[idx]);
+ else
+ ret = qup_i2c_write_one_v2(qup, &msgs[idx]);
+ }
+ } while ((idx++ < (num - 1)) && !use_dma && !ret);
+
+ if (!ret)
+ ret = qup_i2c_change_state(qup, QUP_RESET_STATE);
+
+ if (ret == 0)
+ ret = num;
+out:
+ pm_runtime_mark_last_busy(qup->dev);
+ pm_runtime_put_autosuspend(qup->dev);
+
+ return ret;
+}
+
static u32 qup_i2c_func(struct i2c_adapter *adap)
{
return I2C_FUNC_I2C | (I2C_FUNC_SMBUS_EMUL & ~I2C_FUNC_SMBUS_QUICK);
@@ -523,6 +1319,11 @@ static const struct i2c_algorithm qup_i2c_algo = {
.functionality = qup_i2c_func,
};
+static const struct i2c_algorithm qup_i2c_algo_v2 = {
+ .master_xfer = qup_i2c_xfer_v2,
+ .functionality = qup_i2c_func,
+};
+
/*
* The QUP block will issue a NACK and STOP on the bus when reaching
* the end of the read, the length of the read is specified as one byte
@@ -561,6 +1362,7 @@ static int qup_i2c_probe(struct platform_device *pdev)
int ret, fs_div, hs_div;
int src_clk_freq;
u32 clk_freq = 100000;
+ int blocks;
qup = devm_kzalloc(&pdev->dev, sizeof(*qup), GFP_KERNEL);
if (!qup)
@@ -572,6 +1374,68 @@ static int qup_i2c_probe(struct platform_device *pdev)
of_property_read_u32(node, "clock-frequency", &clk_freq);
+ if (of_device_is_compatible(pdev->dev.of_node, "qcom,i2c-qup-v1.1.1")) {
+ qup->adap.algo = &qup_i2c_algo;
+ qup->adap.quirks = &qup_i2c_quirks;
+ } else {
+ qup->adap.algo = &qup_i2c_algo_v2;
+ ret = qup_i2c_req_dma(qup);
+
+ if (ret == -EPROBE_DEFER)
+ goto fail_dma;
+ else if (ret != 0)
+ goto nodma;
+
+ blocks = (MX_BLOCKS << 1) + 1;
+ qup->btx.sg = devm_kzalloc(&pdev->dev,
+ sizeof(*qup->btx.sg) * blocks,
+ GFP_KERNEL);
+ if (!qup->btx.sg) {
+ ret = -ENOMEM;
+ goto fail_dma;
+ }
+ sg_init_table(qup->btx.sg, blocks);
+
+ qup->brx.sg = devm_kzalloc(&pdev->dev,
+ sizeof(*qup->brx.sg) * blocks,
+ GFP_KERNEL);
+ if (!qup->brx.sg) {
+ ret = -ENOMEM;
+ goto fail_dma;
+ }
+ sg_init_table(qup->brx.sg, blocks);
+
+ /* 2 tag bytes for each block + 5 for start, stop tags */
+ size = blocks * 2 + 5;
+ qup->dpool = dma_pool_create("qup_i2c-dma-pool", &pdev->dev,
+ size, 4, 0);
+
+ qup->start_tag.start = dma_pool_alloc(qup->dpool, GFP_KERNEL,
+ &qup->start_tag.addr);
+ if (!qup->start_tag.start) {
+ ret = -ENOMEM;
+ goto fail_dma;
+ }
+
+ qup->brx.tag.start = dma_pool_alloc(qup->dpool,
+ GFP_KERNEL,
+ &qup->brx.tag.addr);
+ if (!qup->brx.tag.start) {
+ ret = -ENOMEM;
+ goto fail_dma;
+ }
+
+ qup->btx.tag.start = dma_pool_alloc(qup->dpool,
+ GFP_KERNEL,
+ &qup->btx.tag.addr);
+ if (!qup->btx.tag.start) {
+ ret = -ENOMEM;
+ goto fail_dma;
+ }
+ qup->is_dma = true;
+ }
+
+nodma:
/* We support frequencies up to FAST Mode (400KHz) */
if (!clk_freq || clk_freq > 400000) {
dev_err(qup->dev, "clock frequency not supported %d\n",
@@ -667,10 +1531,10 @@ static int qup_i2c_probe(struct platform_device *pdev)
qup->out_blk_sz, qup->out_fifo_sz);
i2c_set_adapdata(&qup->adap, qup);
- qup->adap.algo = &qup_i2c_algo;
- qup->adap.quirks = &qup_i2c_quirks;
qup->adap.dev.parent = qup->dev;
qup->adap.dev.of_node = pdev->dev.of_node;
+ qup->is_last = true;
+
strlcpy(qup->adap.name, "QUP I2C adapter", sizeof(qup->adap.name));
pm_runtime_set_autosuspend_delay(qup->dev, MSEC_PER_SEC);
@@ -689,6 +1553,11 @@ fail_runtime:
pm_runtime_set_suspended(qup->dev);
fail:
qup_i2c_disable_clocks(qup);
+fail_dma:
+ if (qup->btx.dma)
+ dma_release_channel(qup->btx.dma);
+ if (qup->brx.dma)
+ dma_release_channel(qup->brx.dma);
return ret;
}
@@ -696,6 +1565,18 @@ static int qup_i2c_remove(struct platform_device *pdev)
{
struct qup_i2c_dev *qup = platform_get_drvdata(pdev);
+ if (qup->is_dma) {
+ dma_pool_free(qup->dpool, qup->start_tag.start,
+ qup->start_tag.addr);
+ dma_pool_free(qup->dpool, qup->brx.tag.start,
+ qup->brx.tag.addr);
+ dma_pool_free(qup->dpool, qup->btx.tag.start,
+ qup->btx.tag.addr);
+ dma_pool_destroy(qup->dpool);
+ dma_release_channel(qup->btx.dma);
+ dma_release_channel(qup->brx.dma);
+ }
+
disable_irq(qup->irq);
qup_i2c_disable_clocks(qup);
i2c_del_adapter(&qup->adap);
diff --git a/drivers/i2c/busses/i2c-rcar.c b/drivers/i2c/busses/i2c-rcar.c
index 1abeadc8a..68ecb5630 100644
--- a/drivers/i2c/busses/i2c-rcar.c
+++ b/drivers/i2c/busses/i2c-rcar.c
@@ -611,7 +611,7 @@ static int rcar_i2c_probe(struct platform_device *pdev)
if (IS_ERR(priv->io))
return PTR_ERR(priv->io);
- priv->devtype = (enum rcar_i2c_type)of_match_device(rcar_i2c_dt_ids, dev)->data;
+ priv->devtype = (enum rcar_i2c_type)of_device_get_match_data(dev);
init_waitqueue_head(&priv->wait);
adap = &priv->adap;
diff --git a/drivers/i2c/busses/i2c-rk3x.c b/drivers/i2c/busses/i2c-rk3x.c
index 9096d17be..3dcc5f3f2 100644
--- a/drivers/i2c/busses/i2c-rk3x.c
+++ b/drivers/i2c/busses/i2c-rk3x.c
@@ -855,6 +855,7 @@ static struct rk3x_i2c_soc_data soc_data[3] = {
static const struct of_device_id rk3x_i2c_match[] = {
{ .compatible = "rockchip,rk3066-i2c", .data = (void *)&soc_data[0] },
{ .compatible = "rockchip,rk3188-i2c", .data = (void *)&soc_data[1] },
+ { .compatible = "rockchip,rk3228-i2c", .data = (void *)&soc_data[2] },
{ .compatible = "rockchip,rk3288-i2c", .data = (void *)&soc_data[2] },
{},
};
diff --git a/drivers/i2c/busses/i2c-tegra.c b/drivers/i2c/busses/i2c-tegra.c
index a0522fcc4..929185a72 100644
--- a/drivers/i2c/busses/i2c-tegra.c
+++ b/drivers/i2c/busses/i2c-tegra.c
@@ -805,9 +805,7 @@ static int tegra_i2c_probe(struct platform_device *pdev)
i2c_dev->hw = &tegra20_i2c_hw;
if (pdev->dev.of_node) {
- const struct of_device_id *match;
- match = of_match_device(tegra_i2c_of_match, &pdev->dev);
- i2c_dev->hw = match->data;
+ i2c_dev->hw = of_device_get_match_data(&pdev->dev);
i2c_dev->is_dvc = of_device_is_compatible(pdev->dev.of_node,
"nvidia,tegra20-i2c-dvc");
} else if (pdev->id == 3) {
diff --git a/drivers/i2c/busses/i2c-xiic.c b/drivers/i2c/busses/i2c-xiic.c
index 6efd20095..74f54f2f4 100644
--- a/drivers/i2c/busses/i2c-xiic.c
+++ b/drivers/i2c/busses/i2c-xiic.c
@@ -37,6 +37,8 @@
#include <linux/io.h>
#include <linux/slab.h>
#include <linux/of.h>
+#include <linux/clk.h>
+#include <linux/pm_runtime.h>
#define DRIVER_NAME "xiic-i2c"
@@ -66,6 +68,7 @@ enum xiic_endian {
* @endianness: big/little-endian byte order
*/
struct xiic_i2c {
+ struct device *dev;
void __iomem *base;
wait_queue_head_t wait;
struct i2c_adapter adap;
@@ -77,6 +80,7 @@ struct xiic_i2c {
struct i2c_msg *rx_msg;
int rx_pos;
enum xiic_endian endianness;
+ struct clk *clk;
};
@@ -164,6 +168,7 @@ struct xiic_i2c {
#define XIIC_RESET_MASK 0xAUL
+#define XIIC_PM_TIMEOUT 1000 /* ms */
/*
* The following constant is used for the device global interrupt enable
* register, to enable all interrupts for the device, this is the only bit
@@ -676,9 +681,13 @@ static int xiic_xfer(struct i2c_adapter *adap, struct i2c_msg *msgs, int num)
dev_dbg(adap->dev.parent, "%s entry SR: 0x%x\n", __func__,
xiic_getreg8(i2c, XIIC_SR_REG_OFFSET));
+ err = pm_runtime_get_sync(i2c->dev);
+ if (err < 0)
+ return err;
+
err = xiic_busy(i2c);
if (err)
- return err;
+ goto out;
i2c->tx_msg = msgs;
i2c->nmsgs = num;
@@ -686,14 +695,20 @@ static int xiic_xfer(struct i2c_adapter *adap, struct i2c_msg *msgs, int num)
xiic_start_xfer(i2c);
if (wait_event_timeout(i2c->wait, (i2c->state == STATE_ERROR) ||
- (i2c->state == STATE_DONE), HZ))
- return (i2c->state == STATE_DONE) ? num : -EIO;
- else {
+ (i2c->state == STATE_DONE), HZ)) {
+ err = (i2c->state == STATE_DONE) ? num : -EIO;
+ goto out;
+ } else {
i2c->tx_msg = NULL;
i2c->rx_msg = NULL;
i2c->nmsgs = 0;
- return -ETIMEDOUT;
+ err = -ETIMEDOUT;
+ goto out;
}
+out:
+ pm_runtime_mark_last_busy(i2c->dev);
+ pm_runtime_put_autosuspend(i2c->dev);
+ return err;
}
static u32 xiic_func(struct i2c_adapter *adap)
@@ -748,13 +763,28 @@ static int xiic_i2c_probe(struct platform_device *pdev)
mutex_init(&i2c->lock);
init_waitqueue_head(&i2c->wait);
+ i2c->clk = devm_clk_get(&pdev->dev, NULL);
+ if (IS_ERR(i2c->clk)) {
+ dev_err(&pdev->dev, "input clock not found.\n");
+ return PTR_ERR(i2c->clk);
+ }
+ ret = clk_prepare_enable(i2c->clk);
+ if (ret) {
+ dev_err(&pdev->dev, "Unable to enable clock.\n");
+ return ret;
+ }
+ i2c->dev = &pdev->dev;
+ pm_runtime_enable(i2c->dev);
+ pm_runtime_set_autosuspend_delay(i2c->dev, XIIC_PM_TIMEOUT);
+ pm_runtime_use_autosuspend(i2c->dev);
+ pm_runtime_set_active(i2c->dev);
ret = devm_request_threaded_irq(&pdev->dev, irq, xiic_isr,
xiic_process, IRQF_ONESHOT,
pdev->name, i2c);
if (ret < 0) {
dev_err(&pdev->dev, "Cannot claim IRQ\n");
- return ret;
+ goto err_clk_dis;
}
/*
@@ -776,7 +806,7 @@ static int xiic_i2c_probe(struct platform_device *pdev)
if (ret) {
dev_err(&pdev->dev, "Failed to add adapter\n");
xiic_deinit(i2c);
- return ret;
+ goto err_clk_dis;
}
if (pdata) {
@@ -786,16 +816,30 @@ static int xiic_i2c_probe(struct platform_device *pdev)
}
return 0;
+
+err_clk_dis:
+ pm_runtime_set_suspended(&pdev->dev);
+ pm_runtime_disable(&pdev->dev);
+ clk_disable_unprepare(i2c->clk);
+ return ret;
}
static int xiic_i2c_remove(struct platform_device *pdev)
{
struct xiic_i2c *i2c = platform_get_drvdata(pdev);
+ int ret;
/* remove adapter & data */
i2c_del_adapter(&i2c->adap);
+ ret = clk_prepare_enable(i2c->clk);
+ if (ret) {
+ dev_err(&pdev->dev, "Unable to enable clock.\n");
+ return ret;
+ }
xiic_deinit(i2c);
+ clk_disable_unprepare(i2c->clk);
+ pm_runtime_disable(&pdev->dev);
return 0;
}
@@ -808,12 +852,42 @@ static const struct of_device_id xiic_of_match[] = {
MODULE_DEVICE_TABLE(of, xiic_of_match);
#endif
+static int __maybe_unused cdns_i2c_runtime_suspend(struct device *dev)
+{
+ struct platform_device *pdev = to_platform_device(dev);
+ struct xiic_i2c *i2c = platform_get_drvdata(pdev);
+
+ clk_disable(i2c->clk);
+
+ return 0;
+}
+
+static int __maybe_unused cdns_i2c_runtime_resume(struct device *dev)
+{
+ struct platform_device *pdev = to_platform_device(dev);
+ struct xiic_i2c *i2c = platform_get_drvdata(pdev);
+ int ret;
+
+ ret = clk_enable(i2c->clk);
+ if (ret) {
+ dev_err(dev, "Cannot enable clock.\n");
+ return ret;
+ }
+
+ return 0;
+}
+
+static const struct dev_pm_ops xiic_dev_pm_ops = {
+ SET_RUNTIME_PM_OPS(cdns_i2c_runtime_suspend,
+ cdns_i2c_runtime_resume, NULL)
+};
static struct platform_driver xiic_i2c_driver = {
.probe = xiic_i2c_probe,
.remove = xiic_i2c_remove,
.driver = {
.name = DRIVER_NAME,
.of_match_table = of_match_ptr(xiic_of_match),
+ .pm = &xiic_dev_pm_ops,
},
};
diff --git a/drivers/i2c/i2c-boardinfo.c b/drivers/i2c/i2c-boardinfo.c
index 90e322959..e33022e2d 100644
--- a/drivers/i2c/i2c-boardinfo.c
+++ b/drivers/i2c/i2c-boardinfo.c
@@ -12,11 +12,11 @@
* GNU General Public License for more details.
*/
-#include <linux/kernel.h>
-#include <linux/i2c.h>
-#include <linux/slab.h>
#include <linux/export.h>
+#include <linux/i2c.h>
+#include <linux/kernel.h>
#include <linux/rwsem.h>
+#include <linux/slab.h>
#include "i2c-core.h"
diff --git a/drivers/i2c/i2c-core.c b/drivers/i2c/i2c-core.c
index ffe715d34..e584d88ee 100644
--- a/drivers/i2c/i2c-core.c
+++ b/drivers/i2c/i2c-core.c
@@ -28,32 +28,32 @@
*/
#include <dt-bindings/i2c/i2c.h>
-#include <linux/module.h>
-#include <linux/kernel.h>
+#include <asm/uaccess.h>
+#include <linux/acpi.h>
+#include <linux/clk/clk-conf.h>
+#include <linux/completion.h>
#include <linux/delay.h>
+#include <linux/err.h>
#include <linux/errno.h>
#include <linux/gpio.h>
-#include <linux/slab.h>
+#include <linux/hardirq.h>
#include <linux/i2c.h>
-#include <linux/init.h>
#include <linux/idr.h>
+#include <linux/init.h>
+#include <linux/irqflags.h>
+#include <linux/jump_label.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
#include <linux/mutex.h>
-#include <linux/of.h>
#include <linux/of_device.h>
+#include <linux/of.h>
#include <linux/of_irq.h>
-#include <linux/clk/clk-conf.h>
-#include <linux/completion.h>
-#include <linux/hardirq.h>
-#include <linux/irqflags.h>
-#include <linux/rwsem.h>
-#include <linux/pm_runtime.h>
#include <linux/pm_domain.h>
+#include <linux/pm_runtime.h>
#include <linux/pm_wakeirq.h>
-#include <linux/acpi.h>
-#include <linux/jump_label.h>
-#include <asm/uaccess.h>
-#include <linux/err.h>
#include <linux/property.h>
+#include <linux/rwsem.h>
+#include <linux/slab.h>
#include "i2c-core.h"
@@ -73,6 +73,7 @@ static struct device_type i2c_client_type;
static int i2c_detect(struct i2c_adapter *adapter, struct i2c_driver *driver);
static struct static_key i2c_trace_msg = STATIC_KEY_INIT_FALSE;
+static bool is_registered;
void i2c_transfer_trace_reg(void)
{
@@ -524,22 +525,16 @@ static int i2c_device_match(struct device *dev, struct device_driver *drv)
return 0;
}
-
-/* uevent helps with hotplug: modprobe -q $(MODALIAS) */
static int i2c_device_uevent(struct device *dev, struct kobj_uevent_env *env)
{
- struct i2c_client *client = to_i2c_client(dev);
+ struct i2c_client *client = to_i2c_client(dev);
int rc;
rc = acpi_device_uevent_modalias(dev, env);
if (rc != -ENODEV)
return rc;
- if (add_uevent_var(env, "MODALIAS=%s%s",
- I2C_MODULE_PREFIX, client->name))
- return -ENOMEM;
- dev_dbg(dev, "uevent\n");
- return 0;
+ return add_uevent_var(env, "MODALIAS=%s%s", I2C_MODULE_PREFIX, client->name);
}
/* i2c bus recovery routines */
@@ -1529,7 +1524,7 @@ static int i2c_register_adapter(struct i2c_adapter *adap)
int res = 0;
/* Can't register until after driver model init */
- if (unlikely(WARN_ON(!i2c_bus_type.p))) {
+ if (WARN_ON(!is_registered)) {
res = -EAGAIN;
goto out_list;
}
@@ -1926,7 +1921,7 @@ int i2c_register_driver(struct module *owner, struct i2c_driver *driver)
int res;
/* Can't register until after driver model init */
- if (unlikely(WARN_ON(!i2c_bus_type.p)))
+ if (WARN_ON(!is_registered))
return -EAGAIN;
/* add the driver to the list of i2c drivers in the driver core */
@@ -2104,6 +2099,9 @@ static int __init i2c_init(void)
retval = bus_register(&i2c_bus_type);
if (retval)
return retval;
+
+ is_registered = true;
+
#ifdef CONFIG_I2C_COMPAT
i2c_adapter_compat_class = class_compat_register("i2c-adapter");
if (!i2c_adapter_compat_class) {
@@ -2125,6 +2123,7 @@ class_err:
class_compat_unregister(i2c_adapter_compat_class);
bus_err:
#endif
+ is_registered = false;
bus_unregister(&i2c_bus_type);
return retval;
}
diff --git a/drivers/i2c/i2c-dev.c b/drivers/i2c/i2c-dev.c
index 2413ec9f8..0b1108d3c 100644
--- a/drivers/i2c/i2c-dev.c
+++ b/drivers/i2c/i2c-dev.c
@@ -22,17 +22,17 @@
/* The I2C_RDWR ioctl code is written by Kolja Waschk <waschk@telos.de> */
-#include <linux/kernel.h>
-#include <linux/module.h>
#include <linux/device.h>
-#include <linux/notifier.h>
#include <linux/fs.h>
-#include <linux/slab.h>
-#include <linux/init.h>
-#include <linux/list.h>
-#include <linux/i2c.h>
#include <linux/i2c-dev.h>
+#include <linux/i2c.h>
+#include <linux/init.h>
#include <linux/jiffies.h>
+#include <linux/kernel.h>
+#include <linux/list.h>
+#include <linux/module.h>
+#include <linux/notifier.h>
+#include <linux/slab.h>
#include <linux/uaccess.h>
/*
diff --git a/drivers/i2c/i2c-mux.c b/drivers/i2c/i2c-mux.c
index 00fc5b1c7..d4022878b 100644
--- a/drivers/i2c/i2c-mux.c
+++ b/drivers/i2c/i2c-mux.c
@@ -19,13 +19,13 @@
* warranty of any kind, whether express or implied.
*/
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/slab.h>
+#include <linux/acpi.h>
#include <linux/i2c.h>
#include <linux/i2c-mux.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
#include <linux/of.h>
-#include <linux/acpi.h>
+#include <linux/slab.h>
/* multiplexer per channel data */
struct i2c_mux_priv {
diff --git a/drivers/i2c/i2c-smbus.c b/drivers/i2c/i2c-smbus.c
index 94765a819..abb55d3e7 100644
--- a/drivers/i2c/i2c-smbus.c
+++ b/drivers/i2c/i2c-smbus.c
@@ -15,14 +15,14 @@
* GNU General Public License for more details.
*/
-#include <linux/kernel.h>
-#include <linux/module.h>
#include <linux/device.h>
-#include <linux/interrupt.h>
-#include <linux/workqueue.h>
#include <linux/i2c.h>
#include <linux/i2c-smbus.h>
+#include <linux/interrupt.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
#include <linux/slab.h>
+#include <linux/workqueue.h>
struct i2c_smbus_alert {
unsigned int alert_edge_triggered:1;
diff --git a/drivers/i2c/i2c-stub.c b/drivers/i2c/i2c-stub.c
index af2a94e11..06af583d5 100644
--- a/drivers/i2c/i2c-stub.c
+++ b/drivers/i2c/i2c-stub.c
@@ -17,13 +17,13 @@
#define DEBUG 1
-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/slab.h>
#include <linux/errno.h>
#include <linux/i2c.h>
+#include <linux/init.h>
+#include <linux/kernel.h>
#include <linux/list.h>
+#include <linux/module.h>
+#include <linux/slab.h>
#define MAX_CHIPS 10
diff --git a/drivers/i2c/muxes/Kconfig b/drivers/i2c/muxes/Kconfig
index f06b0e246..e280c8ecc 100644
--- a/drivers/i2c/muxes/Kconfig
+++ b/drivers/i2c/muxes/Kconfig
@@ -72,4 +72,13 @@ config I2C_MUX_REG
This driver can also be built as a module. If so, the module
will be called i2c-mux-reg.
+config I2C_DEMUX_PINCTRL
+ tristate "pinctrl-based I2C demultiplexer"
+ depends on PINCTRL && OF
+ select OF_DYNAMIC
+ help
+ If you say yes to this option, support will be included for an I2C
+ demultiplexer that uses the pinctrl subsystem. This is useful if you
+ want to change the I2C master at run-time depending on features.
+
endmenu
diff --git a/drivers/i2c/muxes/Makefile b/drivers/i2c/muxes/Makefile
index e89799b76..7c267c29b 100644
--- a/drivers/i2c/muxes/Makefile
+++ b/drivers/i2c/muxes/Makefile
@@ -3,6 +3,8 @@
obj-$(CONFIG_I2C_ARB_GPIO_CHALLENGE) += i2c-arb-gpio-challenge.o
+obj-$(CONFIG_I2C_DEMUX_PINCTRL) += i2c-demux-pinctrl.o
+
obj-$(CONFIG_I2C_MUX_GPIO) += i2c-mux-gpio.o
obj-$(CONFIG_I2C_MUX_PCA9541) += i2c-mux-pca9541.o
obj-$(CONFIG_I2C_MUX_PCA954x) += i2c-mux-pca954x.o
diff --git a/drivers/i2c/muxes/i2c-demux-pinctrl.c b/drivers/i2c/muxes/i2c-demux-pinctrl.c
new file mode 100644
index 000000000..8de073aed
--- /dev/null
+++ b/drivers/i2c/muxes/i2c-demux-pinctrl.c
@@ -0,0 +1,291 @@
+/*
+ * Pinctrl based I2C DeMultiplexer
+ *
+ * Copyright (C) 2015-16 by Wolfram Sang, Sang Engineering <wsa@sang-engineering.com>
+ * Copyright (C) 2015-16 by Renesas Electronics Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; version 2 of the License.
+ *
+ * See the bindings doc for DTS setup and the sysfs doc for usage information.
+ * (look for filenames containing 'i2c-demux-pinctrl' in Documentation/)
+ */
+
+#include <linux/i2c.h>
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/pinctrl/consumer.h>
+#include <linux/platform_device.h>
+#include <linux/slab.h>
+#include <linux/sysfs.h>
+
+struct i2c_demux_pinctrl_chan {
+ struct device_node *parent_np;
+ struct i2c_adapter *parent_adap;
+ struct of_changeset chgset;
+};
+
+struct i2c_demux_pinctrl_priv {
+ int cur_chan;
+ int num_chan;
+ struct device *dev;
+ const char *bus_name;
+ struct i2c_adapter cur_adap;
+ struct i2c_algorithm algo;
+ struct i2c_demux_pinctrl_chan chan[];
+};
+
+static struct property status_okay = { .name = "status", .length = 3, .value = "ok" };
+
+static int i2c_demux_master_xfer(struct i2c_adapter *adap, struct i2c_msg msgs[], int num)
+{
+ struct i2c_demux_pinctrl_priv *priv = adap->algo_data;
+ struct i2c_adapter *parent = priv->chan[priv->cur_chan].parent_adap;
+
+ return __i2c_transfer(parent, msgs, num);
+}
+
+static u32 i2c_demux_functionality(struct i2c_adapter *adap)
+{
+ struct i2c_demux_pinctrl_priv *priv = adap->algo_data;
+ struct i2c_adapter *parent = priv->chan[priv->cur_chan].parent_adap;
+
+ return parent->algo->functionality(parent);
+}
+
+static int i2c_demux_activate_master(struct i2c_demux_pinctrl_priv *priv, u32 new_chan)
+{
+ struct i2c_adapter *adap;
+ struct pinctrl *p;
+ int ret;
+
+ ret = of_changeset_apply(&priv->chan[new_chan].chgset);
+ if (ret)
+ goto err;
+
+ adap = of_find_i2c_adapter_by_node(priv->chan[new_chan].parent_np);
+ if (!adap) {
+ ret = -ENODEV;
+ goto err;
+ }
+
+ p = devm_pinctrl_get_select(adap->dev.parent, priv->bus_name);
+ if (IS_ERR(p)) {
+ ret = PTR_ERR(p);
+ goto err_with_put;
+ }
+
+ priv->chan[new_chan].parent_adap = adap;
+ priv->cur_chan = new_chan;
+
+ /* Now fill out current adapter structure. cur_chan must be up to date */
+ priv->algo.master_xfer = i2c_demux_master_xfer;
+ priv->algo.functionality = i2c_demux_functionality;
+
+ snprintf(priv->cur_adap.name, sizeof(priv->cur_adap.name),
+ "i2c-demux (master i2c-%d)", i2c_adapter_id(adap));
+ priv->cur_adap.owner = THIS_MODULE;
+ priv->cur_adap.algo = &priv->algo;
+ priv->cur_adap.algo_data = priv;
+ priv->cur_adap.dev.parent = priv->dev;
+ priv->cur_adap.class = adap->class;
+ priv->cur_adap.retries = adap->retries;
+ priv->cur_adap.timeout = adap->timeout;
+ priv->cur_adap.quirks = adap->quirks;
+ priv->cur_adap.dev.of_node = priv->dev->of_node;
+ ret = i2c_add_adapter(&priv->cur_adap);
+ if (ret < 0)
+ goto err_with_put;
+
+ return 0;
+
+ err_with_put:
+ i2c_put_adapter(adap);
+ err:
+ dev_err(priv->dev, "failed to setup demux-adapter %d (%d)\n", new_chan, ret);
+ return ret;
+}
+
+static int i2c_demux_deactivate_master(struct i2c_demux_pinctrl_priv *priv)
+{
+ int ret, cur = priv->cur_chan;
+
+ if (cur < 0)
+ return 0;
+
+ i2c_del_adapter(&priv->cur_adap);
+ i2c_put_adapter(priv->chan[cur].parent_adap);
+
+ ret = of_changeset_revert(&priv->chan[cur].chgset);
+
+ priv->chan[cur].parent_adap = NULL;
+ priv->cur_chan = -EINVAL;
+
+ return ret;
+}
+
+static int i2c_demux_change_master(struct i2c_demux_pinctrl_priv *priv, u32 new_chan)
+{
+ int ret;
+
+ if (new_chan == priv->cur_chan)
+ return 0;
+
+ ret = i2c_demux_deactivate_master(priv);
+ if (ret)
+ return ret;
+
+ return i2c_demux_activate_master(priv, new_chan);
+}
+
+static ssize_t available_masters_show(struct device *dev,
+ struct device_attribute *attr,
+ char *buf)
+{
+ struct i2c_demux_pinctrl_priv *priv = dev_get_drvdata(dev);
+ int count = 0, i;
+
+ for (i = 0; i < priv->num_chan && count < PAGE_SIZE; i++)
+ count += scnprintf(buf + count, PAGE_SIZE - count, "%d:%s%c",
+ i, priv->chan[i].parent_np->full_name,
+ i == priv->num_chan - 1 ? '\n' : ' ');
+
+ return count;
+}
+static DEVICE_ATTR_RO(available_masters);
+
+static ssize_t current_master_show(struct device *dev,
+ struct device_attribute *attr,
+ char *buf)
+{
+ struct i2c_demux_pinctrl_priv *priv = dev_get_drvdata(dev);
+
+ return sprintf(buf, "%d\n", priv->cur_chan);
+}
+
+static ssize_t current_master_store(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ struct i2c_demux_pinctrl_priv *priv = dev_get_drvdata(dev);
+ unsigned int val;
+ int ret;
+
+ ret = kstrtouint(buf, 0, &val);
+ if (ret < 0)
+ return ret;
+
+ if (val >= priv->num_chan)
+ return -EINVAL;
+
+ ret = i2c_demux_change_master(priv, val);
+
+ return ret < 0 ? ret : count;
+}
+static DEVICE_ATTR_RW(current_master);
+
+static int i2c_demux_pinctrl_probe(struct platform_device *pdev)
+{
+ struct device_node *np = pdev->dev.of_node;
+ struct i2c_demux_pinctrl_priv *priv;
+ int num_chan, i, j, err;
+
+ num_chan = of_count_phandle_with_args(np, "i2c-parent", NULL);
+ if (num_chan < 2) {
+ dev_err(&pdev->dev, "Need at least two I2C masters to switch\n");
+ return -EINVAL;
+ }
+
+ priv = devm_kzalloc(&pdev->dev, sizeof(*priv)
+ + num_chan * sizeof(struct i2c_demux_pinctrl_chan), GFP_KERNEL);
+ if (!priv)
+ return -ENOMEM;
+
+ err = of_property_read_string(np, "i2c-bus-name", &priv->bus_name);
+ if (err)
+ return err;
+
+ for (i = 0; i < num_chan; i++) {
+ struct device_node *adap_np;
+
+ adap_np = of_parse_phandle(np, "i2c-parent", i);
+ if (!adap_np) {
+ dev_err(&pdev->dev, "can't get phandle for parent %d\n", i);
+ err = -ENOENT;
+ goto err_rollback;
+ }
+ priv->chan[i].parent_np = adap_np;
+
+ of_changeset_init(&priv->chan[i].chgset);
+ of_changeset_update_property(&priv->chan[i].chgset, adap_np, &status_okay);
+ }
+
+ priv->num_chan = num_chan;
+ priv->dev = &pdev->dev;
+
+ platform_set_drvdata(pdev, priv);
+
+ /* switch to first parent as active master */
+ i2c_demux_activate_master(priv, 0);
+
+ err = device_create_file(&pdev->dev, &dev_attr_available_masters);
+ if (err)
+ goto err_rollback;
+
+ err = device_create_file(&pdev->dev, &dev_attr_current_master);
+ if (err)
+ goto err_rollback_available;
+
+ return 0;
+
+err_rollback_available:
+ device_remove_file(&pdev->dev, &dev_attr_available_masters);
+err_rollback:
+ for (j = 0; j < i; j++) {
+ of_node_put(priv->chan[j].parent_np);
+ of_changeset_destroy(&priv->chan[j].chgset);
+ }
+
+ return err;
+}
+
+static int i2c_demux_pinctrl_remove(struct platform_device *pdev)
+{
+ struct i2c_demux_pinctrl_priv *priv = platform_get_drvdata(pdev);
+ int i;
+
+ device_remove_file(&pdev->dev, &dev_attr_current_master);
+ device_remove_file(&pdev->dev, &dev_attr_available_masters);
+
+ i2c_demux_deactivate_master(priv);
+
+ for (i = 0; i < priv->num_chan; i++) {
+ of_node_put(priv->chan[i].parent_np);
+ of_changeset_destroy(&priv->chan[i].chgset);
+ }
+
+ return 0;
+}
+
+static const struct of_device_id i2c_demux_pinctrl_of_match[] = {
+ { .compatible = "i2c-demux-pinctrl", },
+ {},
+};
+MODULE_DEVICE_TABLE(of, i2c_demux_pinctrl_of_match);
+
+static struct platform_driver i2c_demux_pinctrl_driver = {
+ .driver = {
+ .name = "i2c-demux-pinctrl",
+ .of_match_table = i2c_demux_pinctrl_of_match,
+ },
+ .probe = i2c_demux_pinctrl_probe,
+ .remove = i2c_demux_pinctrl_remove,
+};
+module_platform_driver(i2c_demux_pinctrl_driver);
+
+MODULE_DESCRIPTION("pinctrl-based I2C demux driver");
+MODULE_AUTHOR("Wolfram Sang <wsa@sang-engineering.com>");
+MODULE_LICENSE("GPL v2");
+MODULE_ALIAS("platform:i2c-demux-pinctrl");