summaryrefslogtreecommitdiff
path: root/drivers/ide/tc86c001.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/ide/tc86c001.c')
-rw-r--r--drivers/ide/tc86c001.c270
1 files changed, 270 insertions, 0 deletions
diff --git a/drivers/ide/tc86c001.c b/drivers/ide/tc86c001.c
new file mode 100644
index 000000000..17e6132b9
--- /dev/null
+++ b/drivers/ide/tc86c001.c
@@ -0,0 +1,270 @@
+/*
+ * Copyright (C) 2002 Toshiba Corporation
+ * Copyright (C) 2005-2006 MontaVista Software, Inc. <source@mvista.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/types.h>
+#include <linux/pci.h>
+#include <linux/ide.h>
+#include <linux/module.h>
+
+#define DRV_NAME "tc86c001"
+
+static void tc86c001_set_mode(ide_hwif_t *hwif, ide_drive_t *drive)
+{
+ unsigned long scr_port = hwif->config_data + (drive->dn ? 0x02 : 0x00);
+ u16 mode, scr = inw(scr_port);
+ const u8 speed = drive->dma_mode;
+
+ switch (speed) {
+ case XFER_UDMA_4: mode = 0x00c0; break;
+ case XFER_UDMA_3: mode = 0x00b0; break;
+ case XFER_UDMA_2: mode = 0x00a0; break;
+ case XFER_UDMA_1: mode = 0x0090; break;
+ case XFER_UDMA_0: mode = 0x0080; break;
+ case XFER_MW_DMA_2: mode = 0x0070; break;
+ case XFER_MW_DMA_1: mode = 0x0060; break;
+ case XFER_MW_DMA_0: mode = 0x0050; break;
+ case XFER_PIO_4: mode = 0x0400; break;
+ case XFER_PIO_3: mode = 0x0300; break;
+ case XFER_PIO_2: mode = 0x0200; break;
+ case XFER_PIO_1: mode = 0x0100; break;
+ case XFER_PIO_0:
+ default: mode = 0x0000; break;
+ }
+
+ scr &= (speed < XFER_MW_DMA_0) ? 0xf8ff : 0xff0f;
+ scr |= mode;
+ outw(scr, scr_port);
+}
+
+static void tc86c001_set_pio_mode(ide_hwif_t *hwif, ide_drive_t *drive)
+{
+ drive->dma_mode = drive->pio_mode;
+ tc86c001_set_mode(hwif, drive);
+}
+
+/*
+ * HACKITY HACK
+ *
+ * This is a workaround for the limitation 5 of the TC86C001 IDE controller:
+ * if a DMA transfer terminates prematurely, the controller leaves the device's
+ * interrupt request (INTRQ) pending and does not generate a PCI interrupt (or
+ * set the interrupt bit in the DMA status register), thus no PCI interrupt
+ * will occur until a DMA transfer has been successfully completed.
+ *
+ * We work around this by initiating dummy, zero-length DMA transfer on
+ * a DMA timeout expiration. I found no better way to do this with the current
+ * IDE core than to temporarily replace a higher level driver's timer expiry
+ * handler with our own backing up to that handler in case our recovery fails.
+ */
+static int tc86c001_timer_expiry(ide_drive_t *drive)
+{
+ ide_hwif_t *hwif = drive->hwif;
+ ide_expiry_t *expiry = ide_get_hwifdata(hwif);
+ u8 dma_stat = inb(hwif->dma_base + ATA_DMA_STATUS);
+
+ /* Restore a higher level driver's expiry handler first. */
+ hwif->expiry = expiry;
+
+ if ((dma_stat & 5) == 1) { /* DMA active and no interrupt */
+ unsigned long sc_base = hwif->config_data;
+ unsigned long twcr_port = sc_base + (drive->dn ? 0x06 : 0x04);
+ u8 dma_cmd = inb(hwif->dma_base + ATA_DMA_CMD);
+
+ printk(KERN_WARNING "%s: DMA interrupt possibly stuck, "
+ "attempting recovery...\n", drive->name);
+
+ /* Stop DMA */
+ outb(dma_cmd & ~0x01, hwif->dma_base + ATA_DMA_CMD);
+
+ /* Setup the dummy DMA transfer */
+ outw(0, sc_base + 0x0a); /* Sector Count */
+ outw(0, twcr_port); /* Transfer Word Count 1 or 2 */
+
+ /* Start the dummy DMA transfer */
+
+ /* clear R_OR_WCTR for write */
+ outb(0x00, hwif->dma_base + ATA_DMA_CMD);
+ /* set START_STOPBM */
+ outb(0x01, hwif->dma_base + ATA_DMA_CMD);
+
+ /*
+ * If an interrupt was pending, it should come thru shortly.
+ * If not, a higher level driver's expiry handler should
+ * eventually cause some kind of recovery from the DMA stall.
+ */
+ return WAIT_MIN_SLEEP;
+ }
+
+ /* Chain to the restored expiry handler if DMA wasn't active. */
+ if (likely(expiry != NULL))
+ return expiry(drive);
+
+ /* If there was no handler, "emulate" that for ide_timer_expiry()... */
+ return -1;
+}
+
+static void tc86c001_dma_start(ide_drive_t *drive)
+{
+ ide_hwif_t *hwif = drive->hwif;
+ unsigned long sc_base = hwif->config_data;
+ unsigned long twcr_port = sc_base + (drive->dn ? 0x06 : 0x04);
+ unsigned long nsectors = blk_rq_sectors(hwif->rq);
+
+ /*
+ * We have to manually load the sector count and size into
+ * the appropriate system control registers for DMA to work
+ * with LBA48 and ATAPI devices...
+ */
+ outw(nsectors, sc_base + 0x0a); /* Sector Count */
+ outw(SECTOR_SIZE / 2, twcr_port); /* Transfer Word Count 1/2 */
+
+ /* Install our timeout expiry hook, saving the current handler... */
+ ide_set_hwifdata(hwif, hwif->expiry);
+ hwif->expiry = &tc86c001_timer_expiry;
+
+ ide_dma_start(drive);
+}
+
+static u8 tc86c001_cable_detect(ide_hwif_t *hwif)
+{
+ struct pci_dev *dev = to_pci_dev(hwif->dev);
+ unsigned long sc_base = pci_resource_start(dev, 5);
+ u16 scr1 = inw(sc_base + 0x00);
+
+ /*
+ * System Control 1 Register bit 13 (PDIAGN):
+ * 0=80-pin cable, 1=40-pin cable
+ */
+ return (scr1 & 0x2000) ? ATA_CBL_PATA40 : ATA_CBL_PATA80;
+}
+
+static void init_hwif_tc86c001(ide_hwif_t *hwif)
+{
+ struct pci_dev *dev = to_pci_dev(hwif->dev);
+ unsigned long sc_base = pci_resource_start(dev, 5);
+ u16 scr1 = inw(sc_base + 0x00);
+
+ /* System Control 1 Register bit 15 (Soft Reset) set */
+ outw(scr1 | 0x8000, sc_base + 0x00);
+
+ /* System Control 1 Register bit 14 (FIFO Reset) set */
+ outw(scr1 | 0x4000, sc_base + 0x00);
+
+ /* System Control 1 Register: reset clear */
+ outw(scr1 & ~0xc000, sc_base + 0x00);
+
+ /* Store the system control register base for convenience... */
+ hwif->config_data = sc_base;
+
+ if (!hwif->dma_base)
+ return;
+
+ /*
+ * Sector Count Control Register bits 0 and 1 set:
+ * software sets Sector Count Register for master and slave device
+ */
+ outw(0x0003, sc_base + 0x0c);
+
+ /* Sector Count Register limit */
+ hwif->rqsize = 0xffff;
+}
+
+static const struct ide_port_ops tc86c001_port_ops = {
+ .set_pio_mode = tc86c001_set_pio_mode,
+ .set_dma_mode = tc86c001_set_mode,
+ .cable_detect = tc86c001_cable_detect,
+};
+
+static const struct ide_dma_ops tc86c001_dma_ops = {
+ .dma_host_set = ide_dma_host_set,
+ .dma_setup = ide_dma_setup,
+ .dma_start = tc86c001_dma_start,
+ .dma_end = ide_dma_end,
+ .dma_test_irq = ide_dma_test_irq,
+ .dma_lost_irq = ide_dma_lost_irq,
+ .dma_timer_expiry = ide_dma_sff_timer_expiry,
+ .dma_sff_read_status = ide_dma_sff_read_status,
+};
+
+static const struct ide_port_info tc86c001_chipset = {
+ .name = DRV_NAME,
+ .init_hwif = init_hwif_tc86c001,
+ .port_ops = &tc86c001_port_ops,
+ .dma_ops = &tc86c001_dma_ops,
+ .host_flags = IDE_HFLAG_SINGLE | IDE_HFLAG_OFF_BOARD,
+ .pio_mask = ATA_PIO4,
+ .mwdma_mask = ATA_MWDMA2,
+ .udma_mask = ATA_UDMA4,
+};
+
+static int tc86c001_init_one(struct pci_dev *dev,
+ const struct pci_device_id *id)
+{
+ int rc;
+
+ rc = pci_enable_device(dev);
+ if (rc)
+ goto out;
+
+ rc = pci_request_region(dev, 5, DRV_NAME);
+ if (rc) {
+ printk(KERN_ERR DRV_NAME ": system control regs already in use");
+ goto out_disable;
+ }
+
+ rc = ide_pci_init_one(dev, &tc86c001_chipset, NULL);
+ if (rc)
+ goto out_release;
+
+ goto out;
+
+out_release:
+ pci_release_region(dev, 5);
+out_disable:
+ pci_disable_device(dev);
+out:
+ return rc;
+}
+
+static void tc86c001_remove(struct pci_dev *dev)
+{
+ ide_pci_remove(dev);
+ pci_release_region(dev, 5);
+ pci_disable_device(dev);
+}
+
+static const struct pci_device_id tc86c001_pci_tbl[] = {
+ { PCI_VDEVICE(TOSHIBA_2, PCI_DEVICE_ID_TOSHIBA_TC86C001_IDE), 0 },
+ { 0, }
+};
+MODULE_DEVICE_TABLE(pci, tc86c001_pci_tbl);
+
+static struct pci_driver tc86c001_pci_driver = {
+ .name = "TC86C001",
+ .id_table = tc86c001_pci_tbl,
+ .probe = tc86c001_init_one,
+ .remove = tc86c001_remove,
+};
+
+static int __init tc86c001_ide_init(void)
+{
+ return ide_pci_register_driver(&tc86c001_pci_driver);
+}
+
+static void __exit tc86c001_ide_exit(void)
+{
+ pci_unregister_driver(&tc86c001_pci_driver);
+}
+
+module_init(tc86c001_ide_init);
+module_exit(tc86c001_ide_exit);
+
+MODULE_AUTHOR("MontaVista Software, Inc. <source@mvista.com>");
+MODULE_DESCRIPTION("PCI driver module for TC86C001 IDE");
+MODULE_LICENSE("GPL");