summaryrefslogtreecommitdiff
path: root/drivers/iio/accel
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/iio/accel')
-rw-r--r--drivers/iio/accel/Kconfig21
-rw-r--r--drivers/iio/accel/Makefile3
-rw-r--r--drivers/iio/accel/bmc150-accel.c55
-rw-r--r--drivers/iio/accel/hid-sensor-accel-3d.c15
-rw-r--r--drivers/iio/accel/kxcjk-1013.c41
-rw-r--r--drivers/iio/accel/mma8452.c555
-rw-r--r--drivers/iio/accel/mma9551_core.c8
-rw-r--r--drivers/iio/accel/mma9551_core.h2
-rw-r--r--drivers/iio/accel/mma9553.c148
-rw-r--r--drivers/iio/accel/st_accel.h1
-rw-r--r--drivers/iio/accel/st_accel_core.c86
-rw-r--r--drivers/iio/accel/st_accel_i2c.c4
-rw-r--r--drivers/iio/accel/stk8312.c390
-rw-r--r--drivers/iio/accel/stk8ba50.c302
14 files changed, 1484 insertions, 147 deletions
diff --git a/drivers/iio/accel/Kconfig b/drivers/iio/accel/Kconfig
index 7c9a9a94a..00e7bcbdb 100644
--- a/drivers/iio/accel/Kconfig
+++ b/drivers/iio/accel/Kconfig
@@ -136,4 +136,25 @@ config MMA9553
To compile this driver as a module, choose M here: the module
will be called mma9553.
+
+config STK8312
+ tristate "Sensortek STK8312 3-Axis Accelerometer Driver"
+ depends on I2C
+ help
+ Say yes here to get support for the Sensortek STK8312 3-axis
+ accelerometer.
+
+ Choosing M will build the driver as a module. If so, the module
+ will be called stk8312.
+
+config STK8BA50
+ tristate "Sensortek STK8BA50 3-Axis Accelerometer Driver"
+ depends on I2C
+ help
+ Say yes here to get support for the Sensortek STK8BA50 3-axis
+ accelerometer.
+
+ Choosing M will build the driver as a module. If so, the module
+ will be called stk8ba50.
+
endmenu
diff --git a/drivers/iio/accel/Makefile b/drivers/iio/accel/Makefile
index 99d89e46c..ebd2675b2 100644
--- a/drivers/iio/accel/Makefile
+++ b/drivers/iio/accel/Makefile
@@ -14,6 +14,9 @@ obj-$(CONFIG_MMA9551_CORE) += mma9551_core.o
obj-$(CONFIG_MMA9551) += mma9551.o
obj-$(CONFIG_MMA9553) += mma9553.o
+obj-$(CONFIG_STK8312) += stk8312.o
+obj-$(CONFIG_STK8BA50) += stk8ba50.o
+
obj-$(CONFIG_IIO_SSP_SENSORS_COMMONS) += ssp_accel_sensor.o
obj-$(CONFIG_IIO_ST_ACCEL_3AXIS) += st_accel.o
diff --git a/drivers/iio/accel/bmc150-accel.c b/drivers/iio/accel/bmc150-accel.c
index bf827d012..cc5a35750 100644
--- a/drivers/iio/accel/bmc150-accel.c
+++ b/drivers/iio/accel/bmc150-accel.c
@@ -196,7 +196,7 @@ struct bmc150_accel_data {
u32 slope_thres;
u32 range;
int ev_enable_state;
- int64_t timestamp, old_timestamp;
+ int64_t timestamp, old_timestamp; /* Only used in hw fifo mode. */
const struct bmc150_accel_chip_info *chip_info;
};
@@ -1183,7 +1183,6 @@ static const struct iio_info bmc150_accel_info = {
.write_event_value = bmc150_accel_write_event,
.write_event_config = bmc150_accel_write_event_config,
.read_event_config = bmc150_accel_read_event_config,
- .validate_trigger = bmc150_accel_validate_trigger,
.driver_module = THIS_MODULE,
};
@@ -1222,7 +1221,7 @@ static irqreturn_t bmc150_accel_trigger_handler(int irq, void *p)
mutex_unlock(&data->mutex);
iio_push_to_buffers_with_timestamp(indio_dev, data->buffer,
- data->timestamp);
+ pf->timestamp);
err_read:
iio_trigger_notify_done(indio_dev->trig);
@@ -1535,6 +1534,13 @@ static int bmc150_accel_fifo_set_mode(struct bmc150_accel_data *data)
return ret;
}
+static int bmc150_accel_buffer_preenable(struct iio_dev *indio_dev)
+{
+ struct bmc150_accel_data *data = iio_priv(indio_dev);
+
+ return bmc150_accel_set_power_state(data, true);
+}
+
static int bmc150_accel_buffer_postenable(struct iio_dev *indio_dev)
{
struct bmc150_accel_data *data = iio_priv(indio_dev);
@@ -1591,9 +1597,18 @@ out:
return 0;
}
+static int bmc150_accel_buffer_postdisable(struct iio_dev *indio_dev)
+{
+ struct bmc150_accel_data *data = iio_priv(indio_dev);
+
+ return bmc150_accel_set_power_state(data, false);
+}
+
static const struct iio_buffer_setup_ops bmc150_accel_buffer_ops = {
+ .preenable = bmc150_accel_buffer_preenable,
.postenable = bmc150_accel_buffer_postenable,
.predisable = bmc150_accel_buffer_predisable,
+ .postdisable = bmc150_accel_buffer_postdisable,
};
static int bmc150_accel_probe(struct i2c_client *client,
@@ -1636,6 +1651,15 @@ static int bmc150_accel_probe(struct i2c_client *client,
indio_dev->modes = INDIO_DIRECT_MODE;
indio_dev->info = &bmc150_accel_info;
+ ret = iio_triggered_buffer_setup(indio_dev,
+ &iio_pollfunc_store_time,
+ bmc150_accel_trigger_handler,
+ &bmc150_accel_buffer_ops);
+ if (ret < 0) {
+ dev_err(&client->dev, "Failed: iio triggered buffer setup\n");
+ return ret;
+ }
+
if (client->irq < 0)
client->irq = bmc150_accel_gpio_probe(client, data);
@@ -1648,7 +1672,7 @@ static int bmc150_accel_probe(struct i2c_client *client,
BMC150_ACCEL_IRQ_NAME,
indio_dev);
if (ret)
- return ret;
+ goto err_buffer_cleanup;
/*
* Set latched mode interrupt. While certain interrupts are
@@ -1661,24 +1685,14 @@ static int bmc150_accel_probe(struct i2c_client *client,
BMC150_ACCEL_INT_MODE_LATCH_RESET);
if (ret < 0) {
dev_err(&data->client->dev, "Error writing reg_int_rst_latch\n");
- return ret;
+ goto err_buffer_cleanup;
}
bmc150_accel_interrupts_setup(indio_dev, data);
ret = bmc150_accel_triggers_setup(indio_dev, data);
if (ret)
- return ret;
-
- ret = iio_triggered_buffer_setup(indio_dev,
- &iio_pollfunc_store_time,
- bmc150_accel_trigger_handler,
- &bmc150_accel_buffer_ops);
- if (ret < 0) {
- dev_err(&client->dev,
- "Failed: iio triggered buffer setup\n");
- goto err_trigger_unregister;
- }
+ goto err_buffer_cleanup;
if (i2c_check_functionality(client->adapter, I2C_FUNC_I2C) ||
i2c_check_functionality(client->adapter,
@@ -1692,7 +1706,7 @@ static int bmc150_accel_probe(struct i2c_client *client,
ret = iio_device_register(indio_dev);
if (ret < 0) {
dev_err(&client->dev, "Unable to register iio device\n");
- goto err_buffer_cleanup;
+ goto err_trigger_unregister;
}
ret = pm_runtime_set_active(&client->dev);
@@ -1708,11 +1722,10 @@ static int bmc150_accel_probe(struct i2c_client *client,
err_iio_unregister:
iio_device_unregister(indio_dev);
-err_buffer_cleanup:
- if (indio_dev->pollfunc)
- iio_triggered_buffer_cleanup(indio_dev);
err_trigger_unregister:
bmc150_accel_unregister_triggers(data, BMC150_ACCEL_TRIGGERS - 1);
+err_buffer_cleanup:
+ iio_triggered_buffer_cleanup(indio_dev);
return ret;
}
@@ -1730,6 +1743,8 @@ static int bmc150_accel_remove(struct i2c_client *client)
bmc150_accel_unregister_triggers(data, BMC150_ACCEL_TRIGGERS - 1);
+ iio_triggered_buffer_cleanup(indio_dev);
+
mutex_lock(&data->mutex);
bmc150_accel_set_mode(data, BMC150_ACCEL_SLEEP_MODE_DEEP_SUSPEND, 0);
mutex_unlock(&data->mutex);
diff --git a/drivers/iio/accel/hid-sensor-accel-3d.c b/drivers/iio/accel/hid-sensor-accel-3d.c
index 2b4fad699..ab1e238d5 100644
--- a/drivers/iio/accel/hid-sensor-accel-3d.c
+++ b/drivers/iio/accel/hid-sensor-accel-3d.c
@@ -299,7 +299,6 @@ static int hid_accel_3d_probe(struct platform_device *pdev)
struct iio_dev *indio_dev;
struct accel_3d_state *accel_state;
struct hid_sensor_hub_device *hsdev = pdev->dev.platform_data;
- struct iio_chan_spec *channels;
indio_dev = devm_iio_device_alloc(&pdev->dev,
sizeof(struct accel_3d_state));
@@ -320,21 +319,21 @@ static int hid_accel_3d_probe(struct platform_device *pdev)
return ret;
}
- channels = kmemdup(accel_3d_channels, sizeof(accel_3d_channels),
- GFP_KERNEL);
- if (!channels) {
+ indio_dev->channels = kmemdup(accel_3d_channels,
+ sizeof(accel_3d_channels), GFP_KERNEL);
+ if (!indio_dev->channels) {
dev_err(&pdev->dev, "failed to duplicate channels\n");
return -ENOMEM;
}
- ret = accel_3d_parse_report(pdev, hsdev, channels,
- HID_USAGE_SENSOR_ACCEL_3D, accel_state);
+ ret = accel_3d_parse_report(pdev, hsdev,
+ (struct iio_chan_spec *)indio_dev->channels,
+ HID_USAGE_SENSOR_ACCEL_3D, accel_state);
if (ret) {
dev_err(&pdev->dev, "failed to setup attributes\n");
goto error_free_dev_mem;
}
- indio_dev->channels = channels;
indio_dev->num_channels = ARRAY_SIZE(accel_3d_channels);
indio_dev->dev.parent = &pdev->dev;
indio_dev->info = &accel_3d_info;
@@ -400,7 +399,7 @@ static int hid_accel_3d_remove(struct platform_device *pdev)
return 0;
}
-static struct platform_device_id hid_accel_3d_ids[] = {
+static const struct platform_device_id hid_accel_3d_ids[] = {
{
/* Format: HID-SENSOR-usage_id_in_hex_lowercase */
.name = "HID-SENSOR-200073",
diff --git a/drivers/iio/accel/kxcjk-1013.c b/drivers/iio/accel/kxcjk-1013.c
index 5b7a860df..0d9bd35ff 100644
--- a/drivers/iio/accel/kxcjk-1013.c
+++ b/drivers/iio/accel/kxcjk-1013.c
@@ -875,15 +875,18 @@ static int kxcjk1013_write_event_config(struct iio_dev *indio_dev,
return 0;
}
-static int kxcjk1013_validate_trigger(struct iio_dev *indio_dev,
- struct iio_trigger *trig)
+static int kxcjk1013_buffer_preenable(struct iio_dev *indio_dev)
{
struct kxcjk1013_data *data = iio_priv(indio_dev);
- if (data->dready_trig != trig && data->motion_trig != trig)
- return -EINVAL;
+ return kxcjk1013_set_power_state(data, true);
+}
- return 0;
+static int kxcjk1013_buffer_postdisable(struct iio_dev *indio_dev)
+{
+ struct kxcjk1013_data *data = iio_priv(indio_dev);
+
+ return kxcjk1013_set_power_state(data, false);
}
static IIO_CONST_ATTR_SAMP_FREQ_AVAIL(
@@ -935,6 +938,13 @@ static const struct iio_chan_spec kxcjk1013_channels[] = {
IIO_CHAN_SOFT_TIMESTAMP(3),
};
+static const struct iio_buffer_setup_ops kxcjk1013_buffer_setup_ops = {
+ .preenable = kxcjk1013_buffer_preenable,
+ .postenable = iio_triggered_buffer_postenable,
+ .postdisable = kxcjk1013_buffer_postdisable,
+ .predisable = iio_triggered_buffer_predisable,
+};
+
static const struct iio_info kxcjk1013_info = {
.attrs = &kxcjk1013_attrs_group,
.read_raw = kxcjk1013_read_raw,
@@ -943,7 +953,6 @@ static const struct iio_info kxcjk1013_info = {
.write_event_value = kxcjk1013_write_event,
.write_event_config = kxcjk1013_write_event_config,
.read_event_config = kxcjk1013_read_event_config,
- .validate_trigger = kxcjk1013_validate_trigger,
.driver_module = THIS_MODULE,
};
@@ -1147,8 +1156,10 @@ static const char *kxcjk1013_match_acpi_device(struct device *dev,
id = acpi_match_device(dev->driver->acpi_match_table, dev);
if (!id)
return NULL;
+
if (strcmp(id->id, "SMO8500") == 0)
*is_smo8500_device = true;
+
*chipset = (enum kx_chipset)id->driver_data;
return dev_name(dev);
@@ -1163,6 +1174,7 @@ static int kxcjk1013_gpio_probe(struct i2c_client *client,
if (!client)
return -EINVAL;
+
if (data->is_smo8500_device)
return -ENOTSUPP;
@@ -1276,16 +1288,15 @@ static int kxcjk1013_probe(struct i2c_client *client,
data->motion_trig = NULL;
goto err_trigger_unregister;
}
+ }
- ret = iio_triggered_buffer_setup(indio_dev,
- &iio_pollfunc_store_time,
- kxcjk1013_trigger_handler,
- NULL);
- if (ret < 0) {
- dev_err(&client->dev,
- "iio triggered buffer setup failed\n");
- goto err_trigger_unregister;
- }
+ ret = iio_triggered_buffer_setup(indio_dev,
+ &iio_pollfunc_store_time,
+ kxcjk1013_trigger_handler,
+ &kxcjk1013_buffer_setup_ops);
+ if (ret < 0) {
+ dev_err(&client->dev, "iio triggered buffer setup failed\n");
+ goto err_trigger_unregister;
}
ret = iio_device_register(indio_dev);
diff --git a/drivers/iio/accel/mma8452.c b/drivers/iio/accel/mma8452.c
index 5b8065788..13ea1ea23 100644
--- a/drivers/iio/accel/mma8452.c
+++ b/drivers/iio/accel/mma8452.c
@@ -9,7 +9,7 @@
*
* 7-bit I2C slave address 0x1c/0x1d (pin selectable)
*
- * TODO: interrupt, thresholding, orientation / freefall events, autosleep
+ * TODO: orientation / freefall events, autosleep
*/
#include <linux/module.h>
@@ -18,20 +18,42 @@
#include <linux/iio/sysfs.h>
#include <linux/iio/trigger_consumer.h>
#include <linux/iio/buffer.h>
+#include <linux/iio/trigger.h>
+#include <linux/iio/trigger_consumer.h>
#include <linux/iio/triggered_buffer.h>
+#include <linux/iio/events.h>
#include <linux/delay.h>
#define MMA8452_STATUS 0x00
#define MMA8452_OUT_X 0x01 /* MSB first, 12-bit */
#define MMA8452_OUT_Y 0x03
#define MMA8452_OUT_Z 0x05
+#define MMA8452_INT_SRC 0x0c
#define MMA8452_WHO_AM_I 0x0d
#define MMA8452_DATA_CFG 0x0e
+#define MMA8452_HP_FILTER_CUTOFF 0x0f
+#define MMA8452_HP_FILTER_CUTOFF_SEL_MASK (BIT(0) | BIT(1))
+#define MMA8452_TRANSIENT_CFG 0x1d
+#define MMA8452_TRANSIENT_CFG_ELE BIT(4)
+#define MMA8452_TRANSIENT_CFG_CHAN(chan) BIT(chan + 1)
+#define MMA8452_TRANSIENT_CFG_HPF_BYP BIT(0)
+#define MMA8452_TRANSIENT_SRC 0x1e
+#define MMA8452_TRANSIENT_SRC_XTRANSE BIT(1)
+#define MMA8452_TRANSIENT_SRC_YTRANSE BIT(3)
+#define MMA8452_TRANSIENT_SRC_ZTRANSE BIT(5)
+#define MMA8452_TRANSIENT_THS 0x1f
+#define MMA8452_TRANSIENT_THS_MASK 0x7f
+#define MMA8452_TRANSIENT_COUNT 0x20
#define MMA8452_OFF_X 0x2f
#define MMA8452_OFF_Y 0x30
#define MMA8452_OFF_Z 0x31
#define MMA8452_CTRL_REG1 0x2a
#define MMA8452_CTRL_REG2 0x2b
+#define MMA8452_CTRL_REG2_RST BIT(6)
+#define MMA8452_CTRL_REG4 0x2d
+#define MMA8452_CTRL_REG5 0x2e
+
+#define MMA8452_MAX_REG 0x31
#define MMA8452_STATUS_DRDY (BIT(2) | BIT(1) | BIT(0))
@@ -44,6 +66,10 @@
#define MMA8452_DATA_CFG_FS_2G 0
#define MMA8452_DATA_CFG_FS_4G 1
#define MMA8452_DATA_CFG_FS_8G 2
+#define MMA8452_DATA_CFG_HPF_MASK BIT(4)
+
+#define MMA8452_INT_DRDY BIT(0)
+#define MMA8452_INT_TRANS BIT(5)
#define MMA8452_DEVICE_ID 0x2a
@@ -106,6 +132,12 @@ static int mma8452_get_int_plus_micros_index(const int (*vals)[2], int n,
return -EINVAL;
}
+static int mma8452_get_odr_index(struct mma8452_data *data)
+{
+ return (data->ctrl_reg1 & MMA8452_CTRL_DR_MASK) >>
+ MMA8452_CTRL_DR_SHIFT;
+}
+
static const int mma8452_samp_freq[8][2] = {
{800, 0}, {400, 0}, {200, 0}, {100, 0}, {50, 0}, {12, 500000},
{6, 250000}, {1, 560000}
@@ -121,6 +153,30 @@ static const int mma8452_scales[3][2] = {
{0, 9577}, {0, 19154}, {0, 38307}
};
+/* Datasheet table 35 (step time vs sample frequency) */
+static const int mma8452_transient_time_step_us[8] = {
+ 1250,
+ 2500,
+ 5000,
+ 10000,
+ 20000,
+ 20000,
+ 20000,
+ 20000
+};
+
+/* Datasheet table 18 (normal mode) */
+static const int mma8452_hp_filter_cutoff[8][4][2] = {
+ { {16, 0}, {8, 0}, {4, 0}, {2, 0} }, /* 800 Hz sample */
+ { {16, 0}, {8, 0}, {4, 0}, {2, 0} }, /* 400 Hz sample */
+ { {8, 0}, {4, 0}, {2, 0}, {1, 0} }, /* 200 Hz sample */
+ { {4, 0}, {2, 0}, {1, 0}, {0, 500000} }, /* 100 Hz sample */
+ { {2, 0}, {1, 0}, {0, 500000}, {0, 250000} }, /* 50 Hz sample */
+ { {2, 0}, {1, 0}, {0, 500000}, {0, 250000} }, /* 12.5 Hz sample */
+ { {2, 0}, {1, 0}, {0, 500000}, {0, 250000} }, /* 6.25 Hz sample */
+ { {2, 0}, {1, 0}, {0, 500000}, {0, 250000} } /* 1.56 Hz sample */
+};
+
static ssize_t mma8452_show_samp_freq_avail(struct device *dev,
struct device_attribute *attr, char *buf)
{
@@ -135,9 +191,23 @@ static ssize_t mma8452_show_scale_avail(struct device *dev,
ARRAY_SIZE(mma8452_scales));
}
+static ssize_t mma8452_show_hp_cutoff_avail(struct device *dev,
+ struct device_attribute *attr,
+ char *buf)
+{
+ struct iio_dev *indio_dev = dev_to_iio_dev(dev);
+ struct mma8452_data *data = iio_priv(indio_dev);
+ int i = mma8452_get_odr_index(data);
+
+ return mma8452_show_int_plus_micros(buf, mma8452_hp_filter_cutoff[i],
+ ARRAY_SIZE(mma8452_hp_filter_cutoff[0]));
+}
+
static IIO_DEV_ATTR_SAMP_FREQ_AVAIL(mma8452_show_samp_freq_avail);
static IIO_DEVICE_ATTR(in_accel_scale_available, S_IRUGO,
mma8452_show_scale_avail, NULL, 0);
+static IIO_DEVICE_ATTR(in_accel_filter_high_pass_3db_frequency_available,
+ S_IRUGO, mma8452_show_hp_cutoff_avail, NULL, 0);
static int mma8452_get_samp_freq_index(struct mma8452_data *data,
int val, int val2)
@@ -153,6 +223,31 @@ static int mma8452_get_scale_index(struct mma8452_data *data,
ARRAY_SIZE(mma8452_scales), val, val2);
}
+static int mma8452_get_hp_filter_index(struct mma8452_data *data,
+ int val, int val2)
+{
+ int i = mma8452_get_odr_index(data);
+
+ return mma8452_get_int_plus_micros_index(mma8452_hp_filter_cutoff[i],
+ ARRAY_SIZE(mma8452_scales[0]), val, val2);
+}
+
+static int mma8452_read_hp_filter(struct mma8452_data *data, int *hz, int *uHz)
+{
+ int i, ret;
+
+ ret = i2c_smbus_read_byte_data(data->client, MMA8452_HP_FILTER_CUTOFF);
+ if (ret < 0)
+ return ret;
+
+ i = mma8452_get_odr_index(data);
+ ret &= MMA8452_HP_FILTER_CUTOFF_SEL_MASK;
+ *hz = mma8452_hp_filter_cutoff[i][ret][0];
+ *uHz = mma8452_hp_filter_cutoff[i][ret][1];
+
+ return 0;
+}
+
static int mma8452_read_raw(struct iio_dev *indio_dev,
struct iio_chan_spec const *chan,
int *val, int *val2, long mask)
@@ -180,8 +275,7 @@ static int mma8452_read_raw(struct iio_dev *indio_dev,
*val2 = mma8452_scales[i][1];
return IIO_VAL_INT_PLUS_MICRO;
case IIO_CHAN_INFO_SAMP_FREQ:
- i = (data->ctrl_reg1 & MMA8452_CTRL_DR_MASK) >>
- MMA8452_CTRL_DR_SHIFT;
+ i = mma8452_get_odr_index(data);
*val = mma8452_samp_freq[i][0];
*val2 = mma8452_samp_freq[i][1];
return IIO_VAL_INT_PLUS_MICRO;
@@ -192,6 +286,16 @@ static int mma8452_read_raw(struct iio_dev *indio_dev,
return ret;
*val = sign_extend32(ret, 7);
return IIO_VAL_INT;
+ case IIO_CHAN_INFO_HIGH_PASS_FILTER_3DB_FREQUENCY:
+ if (data->data_cfg & MMA8452_DATA_CFG_HPF_MASK) {
+ ret = mma8452_read_hp_filter(data, val, val2);
+ if (ret < 0)
+ return ret;
+ } else {
+ *val = 0;
+ *val2 = 0;
+ }
+ return IIO_VAL_INT_PLUS_MICRO;
}
return -EINVAL;
}
@@ -233,12 +337,31 @@ fail:
return ret;
}
+static int mma8452_set_hp_filter_frequency(struct mma8452_data *data,
+ int val, int val2)
+{
+ int i, reg;
+
+ i = mma8452_get_hp_filter_index(data, val, val2);
+ if (i < 0)
+ return -EINVAL;
+
+ reg = i2c_smbus_read_byte_data(data->client,
+ MMA8452_HP_FILTER_CUTOFF);
+ if (reg < 0)
+ return reg;
+ reg &= ~MMA8452_HP_FILTER_CUTOFF_SEL_MASK;
+ reg |= i;
+
+ return mma8452_change_config(data, MMA8452_HP_FILTER_CUTOFF, reg);
+}
+
static int mma8452_write_raw(struct iio_dev *indio_dev,
struct iio_chan_spec const *chan,
int val, int val2, long mask)
{
struct mma8452_data *data = iio_priv(indio_dev);
- int i;
+ int i, ret;
if (iio_buffer_enabled(indio_dev))
return -EBUSY;
@@ -266,11 +389,217 @@ static int mma8452_write_raw(struct iio_dev *indio_dev,
return -EINVAL;
return mma8452_change_config(data, MMA8452_OFF_X +
chan->scan_index, val);
+
+ case IIO_CHAN_INFO_HIGH_PASS_FILTER_3DB_FREQUENCY:
+ if (val == 0 && val2 == 0) {
+ data->data_cfg &= ~MMA8452_DATA_CFG_HPF_MASK;
+ } else {
+ data->data_cfg |= MMA8452_DATA_CFG_HPF_MASK;
+ ret = mma8452_set_hp_filter_frequency(data, val, val2);
+ if (ret < 0)
+ return ret;
+ }
+ return mma8452_change_config(data, MMA8452_DATA_CFG,
+ data->data_cfg);
+
+ default:
+ return -EINVAL;
+ }
+}
+
+static int mma8452_read_thresh(struct iio_dev *indio_dev,
+ const struct iio_chan_spec *chan,
+ enum iio_event_type type,
+ enum iio_event_direction dir,
+ enum iio_event_info info,
+ int *val, int *val2)
+{
+ struct mma8452_data *data = iio_priv(indio_dev);
+ int ret, us;
+
+ switch (info) {
+ case IIO_EV_INFO_VALUE:
+ ret = i2c_smbus_read_byte_data(data->client,
+ MMA8452_TRANSIENT_THS);
+ if (ret < 0)
+ return ret;
+
+ *val = ret & MMA8452_TRANSIENT_THS_MASK;
+ return IIO_VAL_INT;
+
+ case IIO_EV_INFO_PERIOD:
+ ret = i2c_smbus_read_byte_data(data->client,
+ MMA8452_TRANSIENT_COUNT);
+ if (ret < 0)
+ return ret;
+
+ us = ret * mma8452_transient_time_step_us[
+ mma8452_get_odr_index(data)];
+ *val = us / USEC_PER_SEC;
+ *val2 = us % USEC_PER_SEC;
+ return IIO_VAL_INT_PLUS_MICRO;
+
+ case IIO_EV_INFO_HIGH_PASS_FILTER_3DB:
+ ret = i2c_smbus_read_byte_data(data->client,
+ MMA8452_TRANSIENT_CFG);
+ if (ret < 0)
+ return ret;
+
+ if (ret & MMA8452_TRANSIENT_CFG_HPF_BYP) {
+ *val = 0;
+ *val2 = 0;
+ } else {
+ ret = mma8452_read_hp_filter(data, val, val2);
+ if (ret < 0)
+ return ret;
+ }
+ return IIO_VAL_INT_PLUS_MICRO;
+
+ default:
+ return -EINVAL;
+ }
+}
+
+static int mma8452_write_thresh(struct iio_dev *indio_dev,
+ const struct iio_chan_spec *chan,
+ enum iio_event_type type,
+ enum iio_event_direction dir,
+ enum iio_event_info info,
+ int val, int val2)
+{
+ struct mma8452_data *data = iio_priv(indio_dev);
+ int ret, reg, steps;
+
+ switch (info) {
+ case IIO_EV_INFO_VALUE:
+ return mma8452_change_config(data, MMA8452_TRANSIENT_THS,
+ val & MMA8452_TRANSIENT_THS_MASK);
+
+ case IIO_EV_INFO_PERIOD:
+ steps = (val * USEC_PER_SEC + val2) /
+ mma8452_transient_time_step_us[
+ mma8452_get_odr_index(data)];
+
+ if (steps > 0xff)
+ return -EINVAL;
+
+ return mma8452_change_config(data, MMA8452_TRANSIENT_COUNT,
+ steps);
+ case IIO_EV_INFO_HIGH_PASS_FILTER_3DB:
+ reg = i2c_smbus_read_byte_data(data->client,
+ MMA8452_TRANSIENT_CFG);
+ if (reg < 0)
+ return reg;
+
+ if (val == 0 && val2 == 0) {
+ reg |= MMA8452_TRANSIENT_CFG_HPF_BYP;
+ } else {
+ reg &= ~MMA8452_TRANSIENT_CFG_HPF_BYP;
+ ret = mma8452_set_hp_filter_frequency(data, val, val2);
+ if (ret < 0)
+ return ret;
+ }
+ return mma8452_change_config(data, MMA8452_TRANSIENT_CFG, reg);
+
default:
return -EINVAL;
}
}
+static int mma8452_read_event_config(struct iio_dev *indio_dev,
+ const struct iio_chan_spec *chan,
+ enum iio_event_type type,
+ enum iio_event_direction dir)
+{
+ struct mma8452_data *data = iio_priv(indio_dev);
+ int ret;
+
+ ret = i2c_smbus_read_byte_data(data->client, MMA8452_TRANSIENT_CFG);
+ if (ret < 0)
+ return ret;
+
+ return ret & MMA8452_TRANSIENT_CFG_CHAN(chan->scan_index) ? 1 : 0;
+}
+
+static int mma8452_write_event_config(struct iio_dev *indio_dev,
+ const struct iio_chan_spec *chan,
+ enum iio_event_type type,
+ enum iio_event_direction dir,
+ int state)
+{
+ struct mma8452_data *data = iio_priv(indio_dev);
+ int val;
+
+ val = i2c_smbus_read_byte_data(data->client, MMA8452_TRANSIENT_CFG);
+ if (val < 0)
+ return val;
+
+ if (state)
+ val |= MMA8452_TRANSIENT_CFG_CHAN(chan->scan_index);
+ else
+ val &= ~MMA8452_TRANSIENT_CFG_CHAN(chan->scan_index);
+
+ val |= MMA8452_TRANSIENT_CFG_ELE;
+
+ return mma8452_change_config(data, MMA8452_TRANSIENT_CFG, val);
+}
+
+static void mma8452_transient_interrupt(struct iio_dev *indio_dev)
+{
+ struct mma8452_data *data = iio_priv(indio_dev);
+ s64 ts = iio_get_time_ns();
+ int src;
+
+ src = i2c_smbus_read_byte_data(data->client, MMA8452_TRANSIENT_SRC);
+ if (src < 0)
+ return;
+
+ if (src & MMA8452_TRANSIENT_SRC_XTRANSE)
+ iio_push_event(indio_dev,
+ IIO_MOD_EVENT_CODE(IIO_ACCEL, 0, IIO_MOD_X,
+ IIO_EV_TYPE_MAG,
+ IIO_EV_DIR_RISING),
+ ts);
+
+ if (src & MMA8452_TRANSIENT_SRC_YTRANSE)
+ iio_push_event(indio_dev,
+ IIO_MOD_EVENT_CODE(IIO_ACCEL, 0, IIO_MOD_Y,
+ IIO_EV_TYPE_MAG,
+ IIO_EV_DIR_RISING),
+ ts);
+
+ if (src & MMA8452_TRANSIENT_SRC_ZTRANSE)
+ iio_push_event(indio_dev,
+ IIO_MOD_EVENT_CODE(IIO_ACCEL, 0, IIO_MOD_Z,
+ IIO_EV_TYPE_MAG,
+ IIO_EV_DIR_RISING),
+ ts);
+}
+
+static irqreturn_t mma8452_interrupt(int irq, void *p)
+{
+ struct iio_dev *indio_dev = p;
+ struct mma8452_data *data = iio_priv(indio_dev);
+ int ret = IRQ_NONE;
+ int src;
+
+ src = i2c_smbus_read_byte_data(data->client, MMA8452_INT_SRC);
+ if (src < 0)
+ return IRQ_NONE;
+
+ if (src & MMA8452_INT_DRDY) {
+ iio_trigger_poll_chained(indio_dev->trig);
+ ret = IRQ_HANDLED;
+ }
+
+ if (src & MMA8452_INT_TRANS) {
+ mma8452_transient_interrupt(indio_dev);
+ ret = IRQ_HANDLED;
+ }
+
+ return ret;
+}
+
static irqreturn_t mma8452_trigger_handler(int irq, void *p)
{
struct iio_poll_func *pf = p;
@@ -291,6 +620,55 @@ done:
return IRQ_HANDLED;
}
+static int mma8452_reg_access_dbg(struct iio_dev *indio_dev,
+ unsigned reg, unsigned writeval,
+ unsigned *readval)
+{
+ int ret;
+ struct mma8452_data *data = iio_priv(indio_dev);
+
+ if (reg > MMA8452_MAX_REG)
+ return -EINVAL;
+
+ if (!readval)
+ return mma8452_change_config(data, reg, writeval);
+
+ ret = i2c_smbus_read_byte_data(data->client, reg);
+ if (ret < 0)
+ return ret;
+
+ *readval = ret;
+
+ return 0;
+}
+
+static const struct iio_event_spec mma8452_transient_event[] = {
+ {
+ .type = IIO_EV_TYPE_MAG,
+ .dir = IIO_EV_DIR_RISING,
+ .mask_separate = BIT(IIO_EV_INFO_ENABLE),
+ .mask_shared_by_type = BIT(IIO_EV_INFO_VALUE) |
+ BIT(IIO_EV_INFO_PERIOD) |
+ BIT(IIO_EV_INFO_HIGH_PASS_FILTER_3DB)
+ },
+};
+
+/*
+ * Threshold is configured in fixed 8G/127 steps regardless of
+ * currently selected scale for measurement.
+ */
+static IIO_CONST_ATTR_NAMED(accel_transient_scale, in_accel_scale, "0.617742");
+
+static struct attribute *mma8452_event_attributes[] = {
+ &iio_const_attr_accel_transient_scale.dev_attr.attr,
+ NULL,
+};
+
+static struct attribute_group mma8452_event_attribute_group = {
+ .attrs = mma8452_event_attributes,
+ .name = "events",
+};
+
#define MMA8452_CHANNEL(axis, idx) { \
.type = IIO_ACCEL, \
.modified = 1, \
@@ -298,7 +676,8 @@ done:
.info_mask_separate = BIT(IIO_CHAN_INFO_RAW) | \
BIT(IIO_CHAN_INFO_CALIBBIAS), \
.info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SAMP_FREQ) | \
- BIT(IIO_CHAN_INFO_SCALE), \
+ BIT(IIO_CHAN_INFO_SCALE) | \
+ BIT(IIO_CHAN_INFO_HIGH_PASS_FILTER_3DB_FREQUENCY), \
.scan_index = idx, \
.scan_type = { \
.sign = 's', \
@@ -307,6 +686,8 @@ done:
.shift = 4, \
.endianness = IIO_BE, \
}, \
+ .event_spec = mma8452_transient_event, \
+ .num_event_specs = ARRAY_SIZE(mma8452_transient_event), \
}
static const struct iio_chan_spec mma8452_channels[] = {
@@ -319,6 +700,7 @@ static const struct iio_chan_spec mma8452_channels[] = {
static struct attribute *mma8452_attributes[] = {
&iio_dev_attr_sampling_frequency_available.dev_attr.attr,
&iio_dev_attr_in_accel_scale_available.dev_attr.attr,
+ &iio_dev_attr_in_accel_filter_high_pass_3db_frequency_available.dev_attr.attr,
NULL
};
@@ -330,11 +712,107 @@ static const struct iio_info mma8452_info = {
.attrs = &mma8452_group,
.read_raw = &mma8452_read_raw,
.write_raw = &mma8452_write_raw,
+ .event_attrs = &mma8452_event_attribute_group,
+ .read_event_value = &mma8452_read_thresh,
+ .write_event_value = &mma8452_write_thresh,
+ .read_event_config = &mma8452_read_event_config,
+ .write_event_config = &mma8452_write_event_config,
+ .debugfs_reg_access = &mma8452_reg_access_dbg,
.driver_module = THIS_MODULE,
};
static const unsigned long mma8452_scan_masks[] = {0x7, 0};
+static int mma8452_data_rdy_trigger_set_state(struct iio_trigger *trig,
+ bool state)
+{
+ struct iio_dev *indio_dev = iio_trigger_get_drvdata(trig);
+ struct mma8452_data *data = iio_priv(indio_dev);
+ int reg;
+
+ reg = i2c_smbus_read_byte_data(data->client, MMA8452_CTRL_REG4);
+ if (reg < 0)
+ return reg;
+
+ if (state)
+ reg |= MMA8452_INT_DRDY;
+ else
+ reg &= ~MMA8452_INT_DRDY;
+
+ return mma8452_change_config(data, MMA8452_CTRL_REG4, reg);
+}
+
+static int mma8452_validate_device(struct iio_trigger *trig,
+ struct iio_dev *indio_dev)
+{
+ struct iio_dev *indio = iio_trigger_get_drvdata(trig);
+
+ if (indio != indio_dev)
+ return -EINVAL;
+
+ return 0;
+}
+
+static const struct iio_trigger_ops mma8452_trigger_ops = {
+ .set_trigger_state = mma8452_data_rdy_trigger_set_state,
+ .validate_device = mma8452_validate_device,
+ .owner = THIS_MODULE,
+};
+
+static int mma8452_trigger_setup(struct iio_dev *indio_dev)
+{
+ struct mma8452_data *data = iio_priv(indio_dev);
+ struct iio_trigger *trig;
+ int ret;
+
+ trig = devm_iio_trigger_alloc(&data->client->dev, "%s-dev%d",
+ indio_dev->name,
+ indio_dev->id);
+ if (!trig)
+ return -ENOMEM;
+
+ trig->dev.parent = &data->client->dev;
+ trig->ops = &mma8452_trigger_ops;
+ iio_trigger_set_drvdata(trig, indio_dev);
+
+ ret = iio_trigger_register(trig);
+ if (ret)
+ return ret;
+
+ indio_dev->trig = trig;
+ return 0;
+}
+
+static void mma8452_trigger_cleanup(struct iio_dev *indio_dev)
+{
+ if (indio_dev->trig)
+ iio_trigger_unregister(indio_dev->trig);
+}
+
+static int mma8452_reset(struct i2c_client *client)
+{
+ int i;
+ int ret;
+
+ ret = i2c_smbus_write_byte_data(client, MMA8452_CTRL_REG2,
+ MMA8452_CTRL_REG2_RST);
+ if (ret < 0)
+ return ret;
+
+ for (i = 0; i < 10; i++) {
+ usleep_range(100, 200);
+ ret = i2c_smbus_read_byte_data(client, MMA8452_CTRL_REG2);
+ if (ret == -EIO)
+ continue; /* I2C comm reset */
+ if (ret < 0)
+ return ret;
+ if (!(ret & MMA8452_CTRL_REG2_RST))
+ return 0;
+ }
+
+ return -ETIMEDOUT;
+}
+
static int mma8452_probe(struct i2c_client *client,
const struct i2c_device_id *id)
{
@@ -365,10 +843,7 @@ static int mma8452_probe(struct i2c_client *client,
indio_dev->num_channels = ARRAY_SIZE(mma8452_channels);
indio_dev->available_scan_masks = mma8452_scan_masks;
- data->ctrl_reg1 = MMA8452_CTRL_ACTIVE |
- (MMA8452_CTRL_DR_DEFAULT << MMA8452_CTRL_DR_SHIFT);
- ret = i2c_smbus_write_byte_data(client, MMA8452_CTRL_REG1,
- data->ctrl_reg1);
+ ret = mma8452_reset(client);
if (ret < 0)
return ret;
@@ -378,18 +853,77 @@ static int mma8452_probe(struct i2c_client *client,
if (ret < 0)
return ret;
+ /*
+ * By default set transient threshold to max to avoid events if
+ * enabling without configuring threshold.
+ */
+ ret = i2c_smbus_write_byte_data(client, MMA8452_TRANSIENT_THS,
+ MMA8452_TRANSIENT_THS_MASK);
+ if (ret < 0)
+ return ret;
+
+ if (client->irq) {
+ /*
+ * Although we enable the transient interrupt source once and
+ * for all here the transient event detection itself is not
+ * enabled until userspace asks for it by
+ * mma8452_write_event_config()
+ */
+ int supported_interrupts = MMA8452_INT_DRDY | MMA8452_INT_TRANS;
+ int enabled_interrupts = MMA8452_INT_TRANS;
+
+ /* Assume wired to INT1 pin */
+ ret = i2c_smbus_write_byte_data(client,
+ MMA8452_CTRL_REG5,
+ supported_interrupts);
+ if (ret < 0)
+ return ret;
+
+ ret = i2c_smbus_write_byte_data(client,
+ MMA8452_CTRL_REG4,
+ enabled_interrupts);
+ if (ret < 0)
+ return ret;
+
+ ret = mma8452_trigger_setup(indio_dev);
+ if (ret < 0)
+ return ret;
+ }
+
+ data->ctrl_reg1 = MMA8452_CTRL_ACTIVE |
+ (MMA8452_CTRL_DR_DEFAULT << MMA8452_CTRL_DR_SHIFT);
+ ret = i2c_smbus_write_byte_data(client, MMA8452_CTRL_REG1,
+ data->ctrl_reg1);
+ if (ret < 0)
+ goto trigger_cleanup;
+
ret = iio_triggered_buffer_setup(indio_dev, NULL,
mma8452_trigger_handler, NULL);
if (ret < 0)
- return ret;
+ goto trigger_cleanup;
+
+ if (client->irq) {
+ ret = devm_request_threaded_irq(&client->dev,
+ client->irq,
+ NULL, mma8452_interrupt,
+ IRQF_TRIGGER_LOW | IRQF_ONESHOT,
+ client->name, indio_dev);
+ if (ret)
+ goto buffer_cleanup;
+ }
ret = iio_device_register(indio_dev);
if (ret < 0)
goto buffer_cleanup;
+
return 0;
buffer_cleanup:
iio_triggered_buffer_cleanup(indio_dev);
+
+trigger_cleanup:
+ mma8452_trigger_cleanup(indio_dev);
+
return ret;
}
@@ -399,6 +933,7 @@ static int mma8452_remove(struct i2c_client *client)
iio_device_unregister(indio_dev);
iio_triggered_buffer_cleanup(indio_dev);
+ mma8452_trigger_cleanup(indio_dev);
mma8452_standby(iio_priv(indio_dev));
return 0;
diff --git a/drivers/iio/accel/mma9551_core.c b/drivers/iio/accel/mma9551_core.c
index c6d5a3a40..2fd2a9956 100644
--- a/drivers/iio/accel/mma9551_core.c
+++ b/drivers/iio/accel/mma9551_core.c
@@ -374,7 +374,7 @@ EXPORT_SYMBOL(mma9551_read_status_word);
* @app_id: Application ID
* @reg: Application register
* @len: Length of array to read in bytes
- * @val: Array of words to read
+ * @buf: Array of words to read
*
* Read multiple configuration registers (word-sized registers).
*
@@ -414,7 +414,7 @@ EXPORT_SYMBOL(mma9551_read_config_words);
* @app_id: Application ID
* @reg: Application register
* @len: Length of array to read in bytes
- * @val: Array of words to read
+ * @buf: Array of words to read
*
* Read multiple status registers (word-sized registers).
*
@@ -454,7 +454,7 @@ EXPORT_SYMBOL(mma9551_read_status_words);
* @app_id: Application ID
* @reg: Application register
* @len: Length of array to write in bytes
- * @val: Array of words to write
+ * @buf: Array of words to write
*
* Write multiple configuration registers (word-sized registers).
*
@@ -800,7 +800,7 @@ EXPORT_SYMBOL(mma9551_read_accel_scale);
*/
int mma9551_app_reset(struct i2c_client *client, u32 app_mask)
{
- return mma9551_write_config_byte(client, MMA9551_APPID_RCS,
+ return mma9551_write_config_byte(client, MMA9551_APPID_RSC,
MMA9551_RSC_RESET +
MMA9551_RSC_OFFSET(app_mask),
MMA9551_RSC_VAL(app_mask));
diff --git a/drivers/iio/accel/mma9551_core.h b/drivers/iio/accel/mma9551_core.h
index edaa56b10..79939e408 100644
--- a/drivers/iio/accel/mma9551_core.h
+++ b/drivers/iio/accel/mma9551_core.h
@@ -22,7 +22,7 @@
#define MMA9551_APPID_TILT 0x0B
#define MMA9551_APPID_SLEEP_WAKE 0x12
#define MMA9551_APPID_PEDOMETER 0x15
-#define MMA9551_APPID_RCS 0x17
+#define MMA9551_APPID_RSC 0x17
#define MMA9551_APPID_NONE 0xff
/* Reset/Suspend/Clear application app masks */
diff --git a/drivers/iio/accel/mma9553.c b/drivers/iio/accel/mma9553.c
index 365a109aa..8bfc61824 100644
--- a/drivers/iio/accel/mma9553.c
+++ b/drivers/iio/accel/mma9553.c
@@ -63,8 +63,8 @@
#define MMA9553_MASK_STATUS_STEPCHG BIT(13)
#define MMA9553_MASK_STATUS_ACTCHG BIT(12)
#define MMA9553_MASK_STATUS_SUSP BIT(11)
-#define MMA9553_MASK_STATUS_ACTIVITY (BIT(10) | BIT(9) | BIT(8))
-#define MMA9553_MASK_STATUS_VERSION 0x00FF
+#define MMA9553_MASK_STATUS_ACTIVITY GENMASK(10, 8)
+#define MMA9553_MASK_STATUS_VERSION GENMASK(7, 0)
#define MMA9553_REG_STEPCNT 0x02
#define MMA9553_REG_DISTANCE 0x04
@@ -76,14 +76,15 @@
#define MMA9553_DEFAULT_GPIO_PIN mma9551_gpio6
#define MMA9553_DEFAULT_GPIO_POLARITY 0
-/* Bitnum used for gpio configuration = bit number in high status byte */
-#define STATUS_TO_BITNUM(bit) (ffs(bit) - 9)
+/* Bitnum used for GPIO configuration = bit number in high status byte */
+#define MMA9553_STATUS_TO_BITNUM(bit) (ffs(bit) - 9)
+#define MMA9553_MAX_BITNUM MMA9553_STATUS_TO_BITNUM(BIT(16))
#define MMA9553_DEFAULT_SAMPLE_RATE 30 /* Hz */
/*
* The internal activity level must be stable for ACTTHD samples before
- * ACTIVITY is updated.The ACTIVITY variable contains the current activity
+ * ACTIVITY is updated. The ACTIVITY variable contains the current activity
* level and is updated every time a step is detected or once a second
* if there are no steps.
*/
@@ -351,11 +352,11 @@ static int mma9553_conf_gpio(struct mma9553_data *data)
* This bit is the logical OR of the SUSPCHG, STEPCHG, and ACTCHG flags.
*/
if (activity_enabled && ev_step_detect->enabled)
- bitnum = STATUS_TO_BITNUM(MMA9553_MASK_STATUS_MRGFL);
+ bitnum = MMA9553_STATUS_TO_BITNUM(MMA9553_MASK_STATUS_MRGFL);
else if (ev_step_detect->enabled)
- bitnum = STATUS_TO_BITNUM(MMA9553_MASK_STATUS_STEPCHG);
+ bitnum = MMA9553_STATUS_TO_BITNUM(MMA9553_MASK_STATUS_STEPCHG);
else if (activity_enabled)
- bitnum = STATUS_TO_BITNUM(MMA9553_MASK_STATUS_ACTCHG);
+ bitnum = MMA9553_STATUS_TO_BITNUM(MMA9553_MASK_STATUS_ACTCHG);
else /* Reset */
appid = MMA9551_APPID_NONE;
@@ -363,9 +364,12 @@ static int mma9553_conf_gpio(struct mma9553_data *data)
return 0;
/* Save initial values for activity and stepcnt */
- if (activity_enabled || ev_step_detect->enabled)
- mma9553_read_activity_stepcnt(data, &data->activity,
- &data->stepcnt);
+ if (activity_enabled || ev_step_detect->enabled) {
+ ret = mma9553_read_activity_stepcnt(data, &data->activity,
+ &data->stepcnt);
+ if (ret < 0)
+ return ret;
+ }
ret = mma9551_gpio_config(data->client,
MMA9553_DEFAULT_GPIO_PIN,
@@ -396,13 +400,13 @@ static int mma9553_init(struct mma9553_data *data)
sizeof(data->conf), (u16 *) &data->conf);
if (ret < 0) {
dev_err(&data->client->dev,
- "device is not MMA9553L: failed to read cfg regs\n");
+ "failed to read configuration registers\n");
return ret;
}
- /* Reset gpio */
- data->gpio_bitnum = -1;
+ /* Reset GPIO */
+ data->gpio_bitnum = MMA9553_MAX_BITNUM;
ret = mma9553_conf_gpio(data);
if (ret < 0)
return ret;
@@ -436,6 +440,32 @@ static int mma9553_init(struct mma9553_data *data)
return mma9551_set_device_state(data->client, true);
}
+static int mma9553_read_status_word(struct mma9553_data *data, u16 reg,
+ u16 *tmp)
+{
+ bool powered_on;
+ int ret;
+
+ /*
+ * The HW only counts steps and other dependent
+ * parameters (speed, distance, calories, activity)
+ * if power is on (from enabling an event or the
+ * step counter).
+ */
+ powered_on = mma9553_is_any_event_enabled(data, false, 0) ||
+ data->stepcnt_enabled;
+ if (!powered_on) {
+ dev_err(&data->client->dev, "No channels enabled\n");
+ return -EINVAL;
+ }
+
+ mutex_lock(&data->mutex);
+ ret = mma9551_read_status_word(data->client, MMA9551_APPID_PEDOMETER,
+ reg, tmp);
+ mutex_unlock(&data->mutex);
+ return ret;
+}
+
static int mma9553_read_raw(struct iio_dev *indio_dev,
struct iio_chan_spec const *chan,
int *val, int *val2, long mask)
@@ -444,69 +474,30 @@ static int mma9553_read_raw(struct iio_dev *indio_dev,
int ret;
u16 tmp;
u8 activity;
- bool powered_on;
switch (mask) {
case IIO_CHAN_INFO_PROCESSED:
switch (chan->type) {
case IIO_STEPS:
- /*
- * The HW only counts steps and other dependent
- * parameters (speed, distance, calories, activity)
- * if power is on (from enabling an event or the
- * step counter */
- powered_on =
- mma9553_is_any_event_enabled(data, false, 0) ||
- data->stepcnt_enabled;
- if (!powered_on) {
- dev_err(&data->client->dev,
- "No channels enabled\n");
- return -EINVAL;
- }
- mutex_lock(&data->mutex);
- ret = mma9551_read_status_word(data->client,
- MMA9551_APPID_PEDOMETER,
+ ret = mma9553_read_status_word(data,
MMA9553_REG_STEPCNT,
&tmp);
- mutex_unlock(&data->mutex);
if (ret < 0)
return ret;
*val = tmp;
return IIO_VAL_INT;
case IIO_DISTANCE:
- powered_on =
- mma9553_is_any_event_enabled(data, false, 0) ||
- data->stepcnt_enabled;
- if (!powered_on) {
- dev_err(&data->client->dev,
- "No channels enabled\n");
- return -EINVAL;
- }
- mutex_lock(&data->mutex);
- ret = mma9551_read_status_word(data->client,
- MMA9551_APPID_PEDOMETER,
+ ret = mma9553_read_status_word(data,
MMA9553_REG_DISTANCE,
&tmp);
- mutex_unlock(&data->mutex);
if (ret < 0)
return ret;
*val = tmp;
return IIO_VAL_INT;
case IIO_ACTIVITY:
- powered_on =
- mma9553_is_any_event_enabled(data, false, 0) ||
- data->stepcnt_enabled;
- if (!powered_on) {
- dev_err(&data->client->dev,
- "No channels enabled\n");
- return -EINVAL;
- }
- mutex_lock(&data->mutex);
- ret = mma9551_read_status_word(data->client,
- MMA9551_APPID_PEDOMETER,
+ ret = mma9553_read_status_word(data,
MMA9553_REG_STATUS,
&tmp);
- mutex_unlock(&data->mutex);
if (ret < 0)
return ret;
@@ -531,38 +522,17 @@ static int mma9553_read_raw(struct iio_dev *indio_dev,
case IIO_VELOCITY: /* m/h */
if (chan->channel2 != IIO_MOD_ROOT_SUM_SQUARED_X_Y_Z)
return -EINVAL;
- powered_on =
- mma9553_is_any_event_enabled(data, false, 0) ||
- data->stepcnt_enabled;
- if (!powered_on) {
- dev_err(&data->client->dev,
- "No channels enabled\n");
- return -EINVAL;
- }
- mutex_lock(&data->mutex);
- ret = mma9551_read_status_word(data->client,
- MMA9551_APPID_PEDOMETER,
- MMA9553_REG_SPEED, &tmp);
- mutex_unlock(&data->mutex);
+ ret = mma9553_read_status_word(data,
+ MMA9553_REG_SPEED,
+ &tmp);
if (ret < 0)
return ret;
*val = tmp;
return IIO_VAL_INT;
case IIO_ENERGY: /* Cal or kcal */
- powered_on =
- mma9553_is_any_event_enabled(data, false, 0) ||
- data->stepcnt_enabled;
- if (!powered_on) {
- dev_err(&data->client->dev,
- "No channels enabled\n");
- return -EINVAL;
- }
- mutex_lock(&data->mutex);
- ret = mma9551_read_status_word(data->client,
- MMA9551_APPID_PEDOMETER,
+ ret = mma9553_read_status_word(data,
MMA9553_REG_CALORIES,
&tmp);
- mutex_unlock(&data->mutex);
if (ret < 0)
return ret;
*val = tmp;
@@ -789,7 +759,7 @@ static int mma9553_write_event_config(struct iio_dev *indio_dev,
mutex_unlock(&data->mutex);
- return ret;
+ return 0;
err_conf_gpio:
if (state) {
@@ -897,7 +867,7 @@ static int mma9553_get_calibgender_mode(struct iio_dev *indio_dev,
gender = mma9553_get_bits(data->conf.filter, MMA9553_MASK_CONF_MALE);
/*
* HW expects 0 for female and 1 for male,
- * while iio index is 0 for male and 1 for female
+ * while iio index is 0 for male and 1 for female.
*/
return !gender;
}
@@ -944,11 +914,11 @@ static const struct iio_event_spec mma9553_activity_events[] = {
},
};
-static const char * const calibgender_modes[] = { "male", "female" };
+static const char * const mma9553_calibgender_modes[] = { "male", "female" };
static const struct iio_enum mma9553_calibgender_enum = {
- .items = calibgender_modes,
- .num_items = ARRAY_SIZE(calibgender_modes),
+ .items = mma9553_calibgender_modes,
+ .num_items = ARRAY_SIZE(mma9553_calibgender_modes),
.get = mma9553_get_calibgender_mode,
.set = mma9553_set_calibgender_mode,
};
@@ -1110,16 +1080,16 @@ static int mma9553_gpio_probe(struct i2c_client *client)
dev = &client->dev;
- /* data ready gpio interrupt pin */
+ /* data ready GPIO interrupt pin */
gpio = devm_gpiod_get_index(dev, MMA9553_GPIO_NAME, 0, GPIOD_IN);
if (IS_ERR(gpio)) {
- dev_err(dev, "acpi gpio get index failed\n");
+ dev_err(dev, "ACPI GPIO get index failed\n");
return PTR_ERR(gpio);
}
ret = gpiod_to_irq(gpio);
- dev_dbg(dev, "gpio resource, no:%d irq:%d\n", desc_to_gpio(gpio), ret);
+ dev_dbg(dev, "GPIO resource, no:%d irq:%d\n", desc_to_gpio(gpio), ret);
return ret;
}
diff --git a/drivers/iio/accel/st_accel.h b/drivers/iio/accel/st_accel.h
index 7ee9724b1..aa1001931 100644
--- a/drivers/iio/accel/st_accel.h
+++ b/drivers/iio/accel/st_accel.h
@@ -20,6 +20,7 @@
#define LSM330D_ACCEL_DEV_NAME "lsm330d_accel"
#define LSM330DL_ACCEL_DEV_NAME "lsm330dl_accel"
#define LSM330DLC_ACCEL_DEV_NAME "lsm330dlc_accel"
+#define LIS331DL_ACCEL_DEV_NAME "lis331dl_accel"
#define LIS331DLH_ACCEL_DEV_NAME "lis331dlh"
#define LSM303DL_ACCEL_DEV_NAME "lsm303dl_accel"
#define LSM303DLH_ACCEL_DEV_NAME "lsm303dlh_accel"
diff --git a/drivers/iio/accel/st_accel_core.c b/drivers/iio/accel/st_accel_core.c
index 211b13271..4002e6410 100644
--- a/drivers/iio/accel/st_accel_core.c
+++ b/drivers/iio/accel/st_accel_core.c
@@ -153,6 +153,44 @@
#define ST_ACCEL_4_IG1_EN_MASK 0x08
#define ST_ACCEL_4_MULTIREAD_BIT true
+/* CUSTOM VALUES FOR SENSOR 5 */
+#define ST_ACCEL_5_WAI_EXP 0x3b
+#define ST_ACCEL_5_ODR_ADDR 0x20
+#define ST_ACCEL_5_ODR_MASK 0x80
+#define ST_ACCEL_5_ODR_AVL_100HZ_VAL 0x00
+#define ST_ACCEL_5_ODR_AVL_400HZ_VAL 0x01
+#define ST_ACCEL_5_PW_ADDR 0x20
+#define ST_ACCEL_5_PW_MASK 0x40
+#define ST_ACCEL_5_FS_ADDR 0x20
+#define ST_ACCEL_5_FS_MASK 0x20
+#define ST_ACCEL_5_FS_AVL_2_VAL 0X00
+#define ST_ACCEL_5_FS_AVL_8_VAL 0X01
+/* TODO: check these resulting gain settings, these are not in the datsheet */
+#define ST_ACCEL_5_FS_AVL_2_GAIN IIO_G_TO_M_S_2(18000)
+#define ST_ACCEL_5_FS_AVL_8_GAIN IIO_G_TO_M_S_2(72000)
+#define ST_ACCEL_5_DRDY_IRQ_ADDR 0x22
+#define ST_ACCEL_5_DRDY_IRQ_INT1_MASK 0x04
+#define ST_ACCEL_5_DRDY_IRQ_INT2_MASK 0x20
+#define ST_ACCEL_5_IG1_EN_ADDR 0x21
+#define ST_ACCEL_5_IG1_EN_MASK 0x08
+#define ST_ACCEL_5_MULTIREAD_BIT false
+
+static const struct iio_chan_spec st_accel_8bit_channels[] = {
+ ST_SENSORS_LSM_CHANNELS(IIO_ACCEL,
+ BIT(IIO_CHAN_INFO_RAW) | BIT(IIO_CHAN_INFO_SCALE),
+ ST_SENSORS_SCAN_X, 1, IIO_MOD_X, 's', IIO_LE, 8, 8,
+ ST_ACCEL_DEFAULT_OUT_X_L_ADDR+1),
+ ST_SENSORS_LSM_CHANNELS(IIO_ACCEL,
+ BIT(IIO_CHAN_INFO_RAW) | BIT(IIO_CHAN_INFO_SCALE),
+ ST_SENSORS_SCAN_Y, 1, IIO_MOD_Y, 's', IIO_LE, 8, 8,
+ ST_ACCEL_DEFAULT_OUT_Y_L_ADDR+1),
+ ST_SENSORS_LSM_CHANNELS(IIO_ACCEL,
+ BIT(IIO_CHAN_INFO_RAW) | BIT(IIO_CHAN_INFO_SCALE),
+ ST_SENSORS_SCAN_Z, 1, IIO_MOD_Z, 's', IIO_LE, 8, 8,
+ ST_ACCEL_DEFAULT_OUT_Z_L_ADDR+1),
+ IIO_CHAN_SOFT_TIMESTAMP(3)
+};
+
static const struct iio_chan_spec st_accel_12bit_channels[] = {
ST_SENSORS_LSM_CHANNELS(IIO_ACCEL,
BIT(IIO_CHAN_INFO_RAW) | BIT(IIO_CHAN_INFO_SCALE),
@@ -454,6 +492,54 @@ static const struct st_sensor_settings st_accel_sensors_settings[] = {
.multi_read_bit = ST_ACCEL_4_MULTIREAD_BIT,
.bootime = 2, /* guess */
},
+ {
+ .wai = ST_ACCEL_5_WAI_EXP,
+ .sensors_supported = {
+ [0] = LIS331DL_ACCEL_DEV_NAME,
+ },
+ .ch = (struct iio_chan_spec *)st_accel_8bit_channels,
+ .odr = {
+ .addr = ST_ACCEL_5_ODR_ADDR,
+ .mask = ST_ACCEL_5_ODR_MASK,
+ .odr_avl = {
+ { 100, ST_ACCEL_5_ODR_AVL_100HZ_VAL },
+ { 400, ST_ACCEL_5_ODR_AVL_400HZ_VAL, },
+ },
+ },
+ .pw = {
+ .addr = ST_ACCEL_5_PW_ADDR,
+ .mask = ST_ACCEL_5_PW_MASK,
+ .value_on = ST_SENSORS_DEFAULT_POWER_ON_VALUE,
+ .value_off = ST_SENSORS_DEFAULT_POWER_OFF_VALUE,
+ },
+ .enable_axis = {
+ .addr = ST_SENSORS_DEFAULT_AXIS_ADDR,
+ .mask = ST_SENSORS_DEFAULT_AXIS_MASK,
+ },
+ .fs = {
+ .addr = ST_ACCEL_5_FS_ADDR,
+ .mask = ST_ACCEL_5_FS_MASK,
+ .fs_avl = {
+ [0] = {
+ .num = ST_ACCEL_FS_AVL_2G,
+ .value = ST_ACCEL_5_FS_AVL_2_VAL,
+ .gain = ST_ACCEL_5_FS_AVL_2_GAIN,
+ },
+ [1] = {
+ .num = ST_ACCEL_FS_AVL_8G,
+ .value = ST_ACCEL_5_FS_AVL_8_VAL,
+ .gain = ST_ACCEL_5_FS_AVL_8_GAIN,
+ },
+ },
+ },
+ .drdy_irq = {
+ .addr = ST_ACCEL_5_DRDY_IRQ_ADDR,
+ .mask_int1 = ST_ACCEL_5_DRDY_IRQ_INT1_MASK,
+ .mask_int2 = ST_ACCEL_5_DRDY_IRQ_INT2_MASK,
+ },
+ .multi_read_bit = ST_ACCEL_5_MULTIREAD_BIT,
+ .bootime = 2, /* guess */
+ },
};
static int st_accel_read_raw(struct iio_dev *indio_dev,
diff --git a/drivers/iio/accel/st_accel_i2c.c b/drivers/iio/accel/st_accel_i2c.c
index 6b720c190..d4ad72ca4 100644
--- a/drivers/iio/accel/st_accel_i2c.c
+++ b/drivers/iio/accel/st_accel_i2c.c
@@ -49,6 +49,10 @@ static const struct of_device_id st_accel_of_match[] = {
.data = LSM330DLC_ACCEL_DEV_NAME,
},
{
+ .compatible = "st,lis331dl-accel",
+ .data = LIS331DL_ACCEL_DEV_NAME,
+ },
+ {
.compatible = "st,lis331dlh-accel",
.data = LIS331DLH_ACCEL_DEV_NAME,
},
diff --git a/drivers/iio/accel/stk8312.c b/drivers/iio/accel/stk8312.c
new file mode 100644
index 000000000..d211d9f39
--- /dev/null
+++ b/drivers/iio/accel/stk8312.c
@@ -0,0 +1,390 @@
+/**
+ * Sensortek STK8312 3-Axis Accelerometer
+ *
+ * Copyright (c) 2015, Intel Corporation.
+ *
+ * This file is subject to the terms and conditions of version 2 of
+ * the GNU General Public License. See the file COPYING in the main
+ * directory of this archive for more details.
+ *
+ * IIO driver for STK8312; 7-bit I2C address: 0x3D.
+ */
+
+#include <linux/acpi.h>
+#include <linux/i2c.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/delay.h>
+#include <linux/iio/iio.h>
+#include <linux/iio/sysfs.h>
+
+#define STK8312_REG_XOUT 0x00
+#define STK8312_REG_YOUT 0x01
+#define STK8312_REG_ZOUT 0x02
+#define STK8312_REG_MODE 0x07
+#define STK8312_REG_STH 0x13
+#define STK8312_REG_RESET 0x20
+#define STK8312_REG_AFECTRL 0x24
+#define STK8312_REG_OTPADDR 0x3D
+#define STK8312_REG_OTPDATA 0x3E
+#define STK8312_REG_OTPCTRL 0x3F
+
+#define STK8312_MODE_ACTIVE 1
+#define STK8312_MODE_STANDBY 0
+#define STK8312_MODE_MASK 0x01
+#define STK8312_RNG_MASK 0xC0
+#define STK8312_RNG_SHIFT 6
+#define STK8312_READ_RETRIES 16
+
+#define STK8312_DRIVER_NAME "stk8312"
+
+/*
+ * The accelerometer has two measurement ranges:
+ *
+ * -6g - +6g (8-bit, signed)
+ * -16g - +16g (8-bit, signed)
+ *
+ * scale1 = (6 + 6) * 9.81 / (2^8 - 1) = 0.4616
+ * scale2 = (16 + 16) * 9.81 / (2^8 - 1) = 1.2311
+ */
+#define STK8312_SCALE_AVAIL "0.4616 1.2311"
+
+static const int stk8312_scale_table[][2] = {
+ {0, 461600}, {1, 231100}
+};
+
+#define STK8312_ACCEL_CHANNEL(reg, axis) { \
+ .type = IIO_ACCEL, \
+ .address = reg, \
+ .modified = 1, \
+ .channel2 = IIO_MOD_##axis, \
+ .info_mask_separate = BIT(IIO_CHAN_INFO_RAW), \
+ .info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE), \
+}
+
+static const struct iio_chan_spec stk8312_channels[] = {
+ STK8312_ACCEL_CHANNEL(STK8312_REG_XOUT, X),
+ STK8312_ACCEL_CHANNEL(STK8312_REG_YOUT, Y),
+ STK8312_ACCEL_CHANNEL(STK8312_REG_ZOUT, Z),
+};
+
+struct stk8312_data {
+ struct i2c_client *client;
+ struct mutex lock;
+ int range;
+ u8 mode;
+};
+
+static IIO_CONST_ATTR(in_accel_scale_available, STK8312_SCALE_AVAIL);
+
+static struct attribute *stk8312_attributes[] = {
+ &iio_const_attr_in_accel_scale_available.dev_attr.attr,
+ NULL,
+};
+
+static const struct attribute_group stk8312_attribute_group = {
+ .attrs = stk8312_attributes
+};
+
+static int stk8312_otp_init(struct stk8312_data *data)
+{
+ int ret;
+ int count = 10;
+ struct i2c_client *client = data->client;
+
+ ret = i2c_smbus_write_byte_data(client, STK8312_REG_OTPADDR, 0x70);
+ if (ret < 0)
+ goto exit_err;
+ ret = i2c_smbus_write_byte_data(client, STK8312_REG_OTPCTRL, 0x02);
+ if (ret < 0)
+ goto exit_err;
+
+ do {
+ usleep_range(1000, 5000);
+ ret = i2c_smbus_read_byte_data(client, STK8312_REG_OTPCTRL);
+ if (ret < 0)
+ goto exit_err;
+ count--;
+ } while (!(ret & 0x80) && count > 0);
+
+ if (count == 0)
+ goto exit_err;
+
+ ret = i2c_smbus_read_byte_data(client, STK8312_REG_OTPDATA);
+ if (ret < 0)
+ goto exit_err;
+
+ ret = i2c_smbus_write_byte_data(data->client,
+ STK8312_REG_AFECTRL, ret);
+ if (ret < 0)
+ goto exit_err;
+ msleep(150);
+
+ return ret;
+
+exit_err:
+ dev_err(&client->dev, "failed to initialize sensor\n");
+ return ret;
+}
+
+static int stk8312_set_mode(struct stk8312_data *data, u8 mode)
+{
+ int ret;
+ u8 masked_reg;
+ struct i2c_client *client = data->client;
+
+ if (mode > 1)
+ return -EINVAL;
+ else if (mode == data->mode)
+ return 0;
+
+ ret = i2c_smbus_read_byte_data(client, STK8312_REG_MODE);
+ if (ret < 0) {
+ dev_err(&client->dev, "failed to change sensor mode\n");
+ return ret;
+ }
+ masked_reg = ret & (~STK8312_MODE_MASK);
+ masked_reg |= mode;
+
+ ret = i2c_smbus_write_byte_data(client,
+ STK8312_REG_MODE, masked_reg);
+ if (ret < 0) {
+ dev_err(&client->dev, "failed to change sensor mode\n");
+ return ret;
+ }
+
+ data->mode = mode;
+ if (mode == STK8312_MODE_ACTIVE) {
+ /* Need to run OTP sequence before entering active mode */
+ usleep_range(1000, 5000);
+ ret = stk8312_otp_init(data);
+ }
+
+ return ret;
+}
+
+static int stk8312_set_range(struct stk8312_data *data, u8 range)
+{
+ int ret;
+ u8 masked_reg;
+ u8 mode;
+ struct i2c_client *client = data->client;
+
+ if (range != 1 && range != 2)
+ return -EINVAL;
+ else if (range == data->range)
+ return 0;
+
+ mode = data->mode;
+ /* We need to go in standby mode to modify registers */
+ ret = stk8312_set_mode(data, STK8312_MODE_STANDBY);
+ if (ret < 0)
+ return ret;
+
+ ret = i2c_smbus_read_byte_data(client, STK8312_REG_STH);
+ if (ret < 0) {
+ dev_err(&client->dev, "failed to change sensor range\n");
+ return ret;
+ }
+
+ masked_reg = ret & (~STK8312_RNG_MASK);
+ masked_reg |= range << STK8312_RNG_SHIFT;
+
+ ret = i2c_smbus_write_byte_data(client, STK8312_REG_STH, masked_reg);
+ if (ret < 0)
+ dev_err(&client->dev, "failed to change sensor range\n");
+ else
+ data->range = range;
+
+ return stk8312_set_mode(data, mode);
+}
+
+static int stk8312_read_accel(struct stk8312_data *data, u8 address)
+{
+ int ret;
+ struct i2c_client *client = data->client;
+
+ if (address > 2)
+ return -EINVAL;
+
+ ret = i2c_smbus_read_byte_data(client, address);
+ if (ret < 0) {
+ dev_err(&client->dev, "register read failed\n");
+ return ret;
+ }
+
+ return sign_extend32(ret, 7);
+}
+
+static int stk8312_read_raw(struct iio_dev *indio_dev,
+ struct iio_chan_spec const *chan,
+ int *val, int *val2, long mask)
+{
+ struct stk8312_data *data = iio_priv(indio_dev);
+
+ if (chan->type != IIO_ACCEL)
+ return -EINVAL;
+
+ switch (mask) {
+ case IIO_CHAN_INFO_RAW:
+ mutex_lock(&data->lock);
+ *val = stk8312_read_accel(data, chan->address);
+ mutex_unlock(&data->lock);
+ return IIO_VAL_INT;
+ case IIO_CHAN_INFO_SCALE:
+ *val = stk8312_scale_table[data->range - 1][0];
+ *val2 = stk8312_scale_table[data->range - 1][1];
+ return IIO_VAL_INT_PLUS_MICRO;
+ }
+
+ return -EINVAL;
+}
+
+static int stk8312_write_raw(struct iio_dev *indio_dev,
+ struct iio_chan_spec const *chan,
+ int val, int val2, long mask)
+{
+ int i;
+ int index = -1;
+ int ret;
+ struct stk8312_data *data = iio_priv(indio_dev);
+
+ switch (mask) {
+ case IIO_CHAN_INFO_SCALE:
+ for (i = 0; i < ARRAY_SIZE(stk8312_scale_table); i++)
+ if (val == stk8312_scale_table[i][0] &&
+ val2 == stk8312_scale_table[i][1]) {
+ index = i + 1;
+ break;
+ }
+ if (index < 0)
+ return -EINVAL;
+
+ mutex_lock(&data->lock);
+ ret = stk8312_set_range(data, index);
+ mutex_unlock(&data->lock);
+
+ return ret;
+ }
+
+ return -EINVAL;
+}
+
+static const struct iio_info stk8312_info = {
+ .driver_module = THIS_MODULE,
+ .read_raw = stk8312_read_raw,
+ .write_raw = stk8312_write_raw,
+ .attrs = &stk8312_attribute_group,
+};
+
+static int stk8312_probe(struct i2c_client *client,
+ const struct i2c_device_id *id)
+{
+ int ret;
+ struct iio_dev *indio_dev;
+ struct stk8312_data *data;
+
+ indio_dev = devm_iio_device_alloc(&client->dev, sizeof(*data));
+ if (!indio_dev) {
+ dev_err(&client->dev, "iio allocation failed!\n");
+ return -ENOMEM;
+ }
+
+ data = iio_priv(indio_dev);
+ data->client = client;
+ i2c_set_clientdata(client, indio_dev);
+ mutex_init(&data->lock);
+
+ indio_dev->dev.parent = &client->dev;
+ indio_dev->info = &stk8312_info;
+ indio_dev->name = STK8312_DRIVER_NAME;
+ indio_dev->modes = INDIO_DIRECT_MODE;
+ indio_dev->channels = stk8312_channels;
+ indio_dev->num_channels = ARRAY_SIZE(stk8312_channels);
+
+ /* A software reset is recommended at power-on */
+ ret = i2c_smbus_write_byte_data(data->client, STK8312_REG_RESET, 0x00);
+ if (ret < 0) {
+ dev_err(&client->dev, "failed to reset sensor\n");
+ return ret;
+ }
+ ret = stk8312_set_range(data, 1);
+ if (ret < 0)
+ return ret;
+
+ ret = stk8312_set_mode(data, STK8312_MODE_ACTIVE);
+ if (ret < 0)
+ return ret;
+
+ ret = iio_device_register(indio_dev);
+ if (ret < 0) {
+ dev_err(&client->dev, "device_register failed\n");
+ stk8312_set_mode(data, STK8312_MODE_STANDBY);
+ }
+
+ return ret;
+}
+
+static int stk8312_remove(struct i2c_client *client)
+{
+ struct iio_dev *indio_dev = i2c_get_clientdata(client);
+
+ iio_device_unregister(indio_dev);
+
+ return stk8312_set_mode(iio_priv(indio_dev), STK8312_MODE_STANDBY);
+}
+
+#ifdef CONFIG_PM_SLEEP
+static int stk8312_suspend(struct device *dev)
+{
+ struct stk8312_data *data;
+
+ data = iio_priv(i2c_get_clientdata(to_i2c_client(dev)));
+
+ return stk8312_set_mode(data, STK8312_MODE_STANDBY);
+}
+
+static int stk8312_resume(struct device *dev)
+{
+ struct stk8312_data *data;
+
+ data = iio_priv(i2c_get_clientdata(to_i2c_client(dev)));
+
+ return stk8312_set_mode(data, STK8312_MODE_ACTIVE);
+}
+
+static SIMPLE_DEV_PM_OPS(stk8312_pm_ops, stk8312_suspend, stk8312_resume);
+
+#define STK8312_PM_OPS (&stk8312_pm_ops)
+#else
+#define STK8312_PM_OPS NULL
+#endif
+
+static const struct i2c_device_id stk8312_i2c_id[] = {
+ {"STK8312", 0},
+ {}
+};
+
+static const struct acpi_device_id stk8312_acpi_id[] = {
+ {"STK8312", 0},
+ {}
+};
+
+MODULE_DEVICE_TABLE(acpi, stk8312_acpi_id);
+
+static struct i2c_driver stk8312_driver = {
+ .driver = {
+ .name = "stk8312",
+ .pm = STK8312_PM_OPS,
+ .acpi_match_table = ACPI_PTR(stk8312_acpi_id),
+ },
+ .probe = stk8312_probe,
+ .remove = stk8312_remove,
+ .id_table = stk8312_i2c_id,
+};
+
+module_i2c_driver(stk8312_driver);
+
+MODULE_AUTHOR("Tiberiu Breana <tiberiu.a.breana@intel.com>");
+MODULE_DESCRIPTION("STK8312 3-Axis Accelerometer driver");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/iio/accel/stk8ba50.c b/drivers/iio/accel/stk8ba50.c
new file mode 100644
index 000000000..30950c6b3
--- /dev/null
+++ b/drivers/iio/accel/stk8ba50.c
@@ -0,0 +1,302 @@
+/**
+ * Sensortek STK8BA50 3-Axis Accelerometer
+ *
+ * Copyright (c) 2015, Intel Corporation.
+ *
+ * This file is subject to the terms and conditions of version 2 of
+ * the GNU General Public License. See the file COPYING in the main
+ * directory of this archive for more details.
+ *
+ * STK8BA50 7-bit I2C address: 0x18.
+ */
+
+#include <linux/acpi.h>
+#include <linux/i2c.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/iio/iio.h>
+#include <linux/iio/sysfs.h>
+
+#define STK8BA50_REG_XOUT 0x02
+#define STK8BA50_REG_YOUT 0x04
+#define STK8BA50_REG_ZOUT 0x06
+#define STK8BA50_REG_RANGE 0x0F
+#define STK8BA50_REG_POWMODE 0x11
+#define STK8BA50_REG_SWRST 0x14
+
+#define STK8BA50_MODE_NORMAL 0
+#define STK8BA50_MODE_SUSPEND 1
+#define STK8BA50_MODE_POWERBIT BIT(7)
+#define STK8BA50_DATA_SHIFT 6
+#define STK8BA50_RESET_CMD 0xB6
+
+#define STK8BA50_DRIVER_NAME "stk8ba50"
+
+#define STK8BA50_SCALE_AVAIL "0.0384 0.0767 0.1534 0.3069"
+
+/*
+ * The accelerometer has four measurement ranges:
+ * +/-2g; +/-4g; +/-8g; +/-16g
+ *
+ * Acceleration values are 10-bit, 2's complement.
+ * Scales are calculated as following:
+ *
+ * scale1 = (2 + 2) * 9.81 / (2^10 - 1) = 0.0384
+ * scale2 = (4 + 4) * 9.81 / (2^10 - 1) = 0.0767
+ * etc.
+ *
+ * Scales are stored in this format:
+ * { <register value>, <scale value> }
+ *
+ * Locally, the range is stored as a table index.
+ */
+static const int stk8ba50_scale_table[][2] = {
+ {3, 38400}, {5, 76700}, {8, 153400}, {12, 306900}
+};
+
+struct stk8ba50_data {
+ struct i2c_client *client;
+ struct mutex lock;
+ int range;
+};
+
+#define STK8BA50_ACCEL_CHANNEL(reg, axis) { \
+ .type = IIO_ACCEL, \
+ .address = reg, \
+ .modified = 1, \
+ .channel2 = IIO_MOD_##axis, \
+ .info_mask_separate = BIT(IIO_CHAN_INFO_RAW), \
+ .info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE), \
+}
+
+static const struct iio_chan_spec stk8ba50_channels[] = {
+ STK8BA50_ACCEL_CHANNEL(STK8BA50_REG_XOUT, X),
+ STK8BA50_ACCEL_CHANNEL(STK8BA50_REG_YOUT, Y),
+ STK8BA50_ACCEL_CHANNEL(STK8BA50_REG_ZOUT, Z),
+};
+
+static IIO_CONST_ATTR(in_accel_scale_available, STK8BA50_SCALE_AVAIL);
+
+static struct attribute *stk8ba50_attributes[] = {
+ &iio_const_attr_in_accel_scale_available.dev_attr.attr,
+ NULL,
+};
+
+static const struct attribute_group stk8ba50_attribute_group = {
+ .attrs = stk8ba50_attributes
+};
+
+static int stk8ba50_read_accel(struct stk8ba50_data *data, u8 reg)
+{
+ int ret;
+ struct i2c_client *client = data->client;
+
+ ret = i2c_smbus_read_word_data(client, reg);
+ if (ret < 0) {
+ dev_err(&client->dev, "register read failed\n");
+ return ret;
+ }
+
+ return sign_extend32(ret >> STK8BA50_DATA_SHIFT, 9);
+}
+
+static int stk8ba50_read_raw(struct iio_dev *indio_dev,
+ struct iio_chan_spec const *chan,
+ int *val, int *val2, long mask)
+{
+ struct stk8ba50_data *data = iio_priv(indio_dev);
+
+ switch (mask) {
+ case IIO_CHAN_INFO_RAW:
+ mutex_lock(&data->lock);
+ *val = stk8ba50_read_accel(data, chan->address);
+ mutex_unlock(&data->lock);
+ return IIO_VAL_INT;
+ case IIO_CHAN_INFO_SCALE:
+ *val = 0;
+ *val2 = stk8ba50_scale_table[data->range][1];
+ return IIO_VAL_INT_PLUS_MICRO;
+ }
+
+ return -EINVAL;
+}
+
+static int stk8ba50_write_raw(struct iio_dev *indio_dev,
+ struct iio_chan_spec const *chan,
+ int val, int val2, long mask)
+{
+ int ret;
+ int i;
+ int index = -1;
+ struct stk8ba50_data *data = iio_priv(indio_dev);
+
+ switch (mask) {
+ case IIO_CHAN_INFO_SCALE:
+ if (val != 0)
+ return -EINVAL;
+
+ for (i = 0; i < ARRAY_SIZE(stk8ba50_scale_table); i++)
+ if (val2 == stk8ba50_scale_table[i][1]) {
+ index = i;
+ break;
+ }
+ if (index < 0)
+ return -EINVAL;
+
+ ret = i2c_smbus_write_byte_data(data->client,
+ STK8BA50_REG_RANGE,
+ stk8ba50_scale_table[index][0]);
+ if (ret < 0)
+ dev_err(&data->client->dev,
+ "failed to set measurement range\n");
+ else
+ data->range = index;
+
+ return ret;
+ }
+
+ return -EINVAL;
+}
+
+static const struct iio_info stk8ba50_info = {
+ .driver_module = THIS_MODULE,
+ .read_raw = stk8ba50_read_raw,
+ .write_raw = stk8ba50_write_raw,
+ .attrs = &stk8ba50_attribute_group,
+};
+
+static int stk8ba50_set_power(struct stk8ba50_data *data, bool mode)
+{
+ int ret;
+ u8 masked_reg;
+ struct i2c_client *client = data->client;
+
+ ret = i2c_smbus_read_byte_data(client, STK8BA50_REG_POWMODE);
+ if (ret < 0)
+ goto exit_err;
+
+ if (mode)
+ masked_reg = ret | STK8BA50_MODE_POWERBIT;
+ else
+ masked_reg = ret & (~STK8BA50_MODE_POWERBIT);
+
+ ret = i2c_smbus_write_byte_data(client, STK8BA50_REG_POWMODE,
+ masked_reg);
+ if (ret < 0)
+ goto exit_err;
+
+ return ret;
+
+exit_err:
+ dev_err(&client->dev, "failed to change sensor mode\n");
+ return ret;
+}
+
+static int stk8ba50_probe(struct i2c_client *client,
+ const struct i2c_device_id *id)
+{
+ int ret;
+ struct iio_dev *indio_dev;
+ struct stk8ba50_data *data;
+
+ indio_dev = devm_iio_device_alloc(&client->dev, sizeof(*data));
+ if (!indio_dev) {
+ dev_err(&client->dev, "iio allocation failed!\n");
+ return -ENOMEM;
+ }
+
+ data = iio_priv(indio_dev);
+ data->client = client;
+ i2c_set_clientdata(client, indio_dev);
+ mutex_init(&data->lock);
+
+ indio_dev->dev.parent = &client->dev;
+ indio_dev->info = &stk8ba50_info;
+ indio_dev->name = STK8BA50_DRIVER_NAME;
+ indio_dev->modes = INDIO_DIRECT_MODE;
+ indio_dev->channels = stk8ba50_channels;
+ indio_dev->num_channels = ARRAY_SIZE(stk8ba50_channels);
+
+ /* Reset all registers on startup */
+ ret = i2c_smbus_write_byte_data(client,
+ STK8BA50_REG_SWRST, STK8BA50_RESET_CMD);
+ if (ret < 0) {
+ dev_err(&client->dev, "failed to reset sensor\n");
+ return ret;
+ }
+
+ /* The default range is +/-2g */
+ data->range = 0;
+
+ ret = iio_device_register(indio_dev);
+ if (ret < 0) {
+ dev_err(&client->dev, "device_register failed\n");
+ stk8ba50_set_power(data, STK8BA50_MODE_SUSPEND);
+ }
+
+ return ret;
+}
+
+static int stk8ba50_remove(struct i2c_client *client)
+{
+ struct iio_dev *indio_dev = i2c_get_clientdata(client);
+
+ iio_device_unregister(indio_dev);
+
+ return stk8ba50_set_power(iio_priv(indio_dev), STK8BA50_MODE_SUSPEND);
+}
+
+#ifdef CONFIG_PM_SLEEP
+static int stk8ba50_suspend(struct device *dev)
+{
+ struct stk8ba50_data *data;
+
+ data = iio_priv(i2c_get_clientdata(to_i2c_client(dev)));
+
+ return stk8ba50_set_power(data, STK8BA50_MODE_SUSPEND);
+}
+
+static int stk8ba50_resume(struct device *dev)
+{
+ struct stk8ba50_data *data;
+
+ data = iio_priv(i2c_get_clientdata(to_i2c_client(dev)));
+
+ return stk8ba50_set_power(data, STK8BA50_MODE_NORMAL);
+}
+
+static SIMPLE_DEV_PM_OPS(stk8ba50_pm_ops, stk8ba50_suspend, stk8ba50_resume);
+
+#define STK8BA50_PM_OPS (&stk8ba50_pm_ops)
+#else
+#define STK8BA50_PM_OPS NULL
+#endif
+
+static const struct i2c_device_id stk8ba50_i2c_id[] = {
+ {"stk8ba50", 0},
+ {}
+};
+
+static const struct acpi_device_id stk8ba50_acpi_id[] = {
+ {"STK8BA50", 0},
+ {}
+};
+
+MODULE_DEVICE_TABLE(acpi, stk8ba50_acpi_id);
+
+static struct i2c_driver stk8ba50_driver = {
+ .driver = {
+ .name = "stk8ba50",
+ .pm = STK8BA50_PM_OPS,
+ .acpi_match_table = ACPI_PTR(stk8ba50_acpi_id),
+ },
+ .probe = stk8ba50_probe,
+ .remove = stk8ba50_remove,
+ .id_table = stk8ba50_i2c_id,
+};
+
+module_i2c_driver(stk8ba50_driver);
+
+MODULE_AUTHOR("Tiberiu Breana <tiberiu.a.breana@intel.com>");
+MODULE_DESCRIPTION("STK8BA50 3-Axis Accelerometer driver");
+MODULE_LICENSE("GPL v2");