diff options
Diffstat (limited to 'drivers/iio/light/Kconfig')
| -rw-r--r-- | drivers/iio/light/Kconfig | 231 |
1 files changed, 231 insertions, 0 deletions
diff --git a/drivers/iio/light/Kconfig b/drivers/iio/light/Kconfig new file mode 100644 index 000000000..01a1a16ab --- /dev/null +++ b/drivers/iio/light/Kconfig @@ -0,0 +1,231 @@ +# +# Light sensors +# +# When adding new entries keep the list in alphabetical order + +menu "Light sensors" + +config ADJD_S311 + tristate "ADJD-S311-CR999 digital color sensor" + select IIO_BUFFER + select IIO_TRIGGERED_BUFFER + depends on I2C + help + If you say yes here you get support for the Avago ADJD-S311-CR999 + digital color light sensor. + + This driver can also be built as a module. If so, the module + will be called adjd_s311. + +config AL3320A + tristate "AL3320A ambient light sensor" + depends on I2C + help + Say Y here if you want to build a driver for the Dyna Image AL3320A + ambient light sensor. + + To compile this driver as a module, choose M here: the + module will be called al3320a. + +config APDS9300 + tristate "APDS9300 ambient light sensor" + depends on I2C + help + Say Y here if you want to build a driver for the Avago APDS9300 + ambient light sensor. + + To compile this driver as a module, choose M here: the + module will be called apds9300. + +config CM32181 + depends on I2C + tristate "CM32181 driver" + help + Say Y here if you use cm32181. + This option enables ambient light sensor using + Capella cm32181 device driver. + + To compile this driver as a module, choose M here: + the module will be called cm32181. + +config CM3232 + depends on I2C + tristate "CM3232 ambient light sensor" + help + Say Y here if you use cm3232. + This option enables ambient light sensor using + Capella Microsystems cm3232 device driver. + + To compile this driver as a module, choose M here: + the module will be called cm3232. + +config CM3323 + depends on I2C + tristate "Capella CM3323 color light sensor" + help + Say Y here if you want to build a driver for Capela CM3323 + color sensor. + + To compile this driver as a module, choose M here: the module will + be called cm3323. + +config CM36651 + depends on I2C + tristate "CM36651 driver" + help + Say Y here if you use cm36651. + This option enables proximity & RGB sensor using + Capella cm36651 device driver. + + To compile this driver as a module, choose M here: + the module will be called cm36651. + +config GP2AP020A00F + tristate "Sharp GP2AP020A00F Proximity/ALS sensor" + depends on I2C + select REGMAP_I2C + select IIO_BUFFER + select IIO_TRIGGERED_BUFFER + select IRQ_WORK + help + Say Y here if you have a Sharp GP2AP020A00F proximity/ALS combo-chip + hooked to an I2C bus. + + To compile this driver as a module, choose M here: the + module will be called gp2ap020a00f. + +config ISL29125 + tristate "Intersil ISL29125 digital color light sensor" + depends on I2C + select IIO_BUFFER + select IIO_TRIGGERED_BUFFER + help + Say Y here if you want to build a driver for the Intersil ISL29125 + RGB light sensor for I2C. + + To compile this driver as a module, choose M here: the module will be + called isl29125. + +config HID_SENSOR_ALS + depends on HID_SENSOR_HUB + select IIO_BUFFER + select IIO_TRIGGERED_BUFFER + select HID_SENSOR_IIO_COMMON + select HID_SENSOR_IIO_TRIGGER + tristate "HID ALS" + help + Say yes here to build support for the HID SENSOR + Ambient light sensor. + + To compile this driver as a module, choose M here: the + module will be called hid-sensor-als. + +config HID_SENSOR_PROX + depends on HID_SENSOR_HUB + select IIO_BUFFER + select IIO_TRIGGERED_BUFFER + select HID_SENSOR_IIO_COMMON + select HID_SENSOR_IIO_TRIGGER + tristate "HID PROX" + help + Say yes here to build support for the HID SENSOR + Proximity sensor. + + To compile this driver as a module, choose M here: the + module will be called hid-sensor-prox. + +config JSA1212 + tristate "JSA1212 ALS and proximity sensor driver" + depends on I2C + select REGMAP_I2C + help + Say Y here if you want to build a IIO driver for JSA1212 + proximity & ALS sensor device. + + To compile this driver as a module, choose M here: + the module will be called jsa1212. + +config SENSORS_LM3533 + tristate "LM3533 ambient light sensor" + depends on MFD_LM3533 + help + If you say yes here you get support for the ambient light sensor + interface on National Semiconductor / TI LM3533 Lighting Power + chips. + + The sensor interface can be used to control the LEDs and backlights + of the chip through defining five light zones and three sets of + corresponding output-current values. + + The driver provides raw and mean adc readings along with the current + light zone through sysfs. A threshold event can be generated on zone + changes. The ALS-control output values can be set per zone for the + three current output channels. + +config LTR501 + tristate "LTR-501ALS-01 light sensor" + depends on I2C + select IIO_BUFFER + select IIO_TRIGGERED_BUFFER + help + If you say yes here you get support for the Lite-On LTR-501ALS-01 + ambient light and proximity sensor. + + This driver can also be built as a module. If so, the module + will be called ltr501. + +config TCS3414 + tristate "TAOS TCS3414 digital color sensor" + depends on I2C + select IIO_BUFFER + select IIO_TRIGGERED_BUFFER + help + If you say yes here you get support for the TAOS TCS3414 + family of digital color sensors. + + This driver can also be built as a module. If so, the module + will be called tcs3414. + +config TCS3472 + tristate "TAOS TCS3472 color light-to-digital converter" + depends on I2C + select IIO_BUFFER + select IIO_TRIGGERED_BUFFER + help + If you say yes here you get support for the TAOS TCS3472 + family of color light-to-digital converters with IR filter. + + This driver can also be built as a module. If so, the module + will be called tcs3472. + +config SENSORS_TSL2563 + tristate "TAOS TSL2560, TSL2561, TSL2562 and TSL2563 ambient light sensors" + depends on I2C + help + If you say yes here you get support for the Taos TSL2560, + TSL2561, TSL2562 and TSL2563 ambient light sensors. + + This driver can also be built as a module. If so, the module + will be called tsl2563. + +config TSL4531 + tristate "TAOS TSL4531 ambient light sensors" + depends on I2C + help + Say Y here if you want to build a driver for the TAOS TSL4531 family + of ambient light sensors with direct lux output. + + To compile this driver as a module, choose M here: the + module will be called tsl4531. + +config VCNL4000 + tristate "VCNL4000 combined ALS and proximity sensor" + depends on I2C + help + Say Y here if you want to build a driver for the Vishay VCNL4000 + combined ambient light and proximity sensor. + + To compile this driver as a module, choose M here: the + module will be called vcnl4000. + +endmenu |