diff options
Diffstat (limited to 'drivers/iio/pressure/Kconfig')
| -rw-r--r-- | drivers/iio/pressure/Kconfig | 121 |
1 files changed, 121 insertions, 0 deletions
diff --git a/drivers/iio/pressure/Kconfig b/drivers/iio/pressure/Kconfig new file mode 100644 index 000000000..fa6295041 --- /dev/null +++ b/drivers/iio/pressure/Kconfig @@ -0,0 +1,121 @@ +# +# Pressure drivers +# +# When adding new entries keep the list in alphabetical order + +menu "Pressure sensors" + +config BMP280 + tristate "Bosch Sensortec BMP280 pressure sensor driver" + depends on I2C + select REGMAP_I2C + help + Say yes here to build support for Bosch Sensortec BMP280 + pressure and temperature sensor. + + To compile this driver as a module, choose M here: the module + will be called bmp280. + +config HID_SENSOR_PRESS + depends on HID_SENSOR_HUB + select IIO_BUFFER + select IIO_TRIGGERED_BUFFER + select HID_SENSOR_IIO_COMMON + select HID_SENSOR_IIO_TRIGGER + tristate "HID PRESS" + help + Say yes here to build support for the HID SENSOR + Pressure driver + + To compile this driver as a module, choose M here: the module + will be called hid-sensor-press. + +config MPL115 + tristate "Freescale MPL115A2 pressure sensor driver" + depends on I2C + help + Say yes here to build support for the Freescale MPL115A2 + pressure sensor connected via I2C. + + To compile this driver as a module, choose M here: the module + will be called mpl115. + +config MPL3115 + tristate "Freescale MPL3115A2 pressure sensor driver" + depends on I2C + select IIO_BUFFER + select IIO_TRIGGERED_BUFFER + help + Say yes here to build support for the Freescale MPL3115A2 + pressure sensor / altimeter. + + To compile this driver as a module, choose M here: the module + will be called mpl3115. + +config MS5611 + tristate "Measurement Specialities MS5611 pressure sensor driver" + help + Say Y here to build support for the Measurement Specialities + MS5611 pressure and temperature sensor. + + To compile this driver as a module, choose M here: the module will + be called ms5611_core. + +config MS5611_I2C + tristate "support I2C bus connection" + depends on I2C && MS5611 + help + Say Y here to build I2C bus support for MS5611. + + To compile this driver as a module, choose M here: the module will + be called ms5611_i2c. + +config MS5611_SPI + tristate "support SPI bus connection" + depends on SPI_MASTER && MS5611 + help + Say Y here to build SPI bus support for MS5611. + + To compile this driver as a module, choose M here: the module will + be called ms5611_spi. + +config IIO_ST_PRESS + tristate "STMicroelectronics pressure sensor Driver" + depends on (I2C || SPI_MASTER) && SYSFS + select IIO_ST_SENSORS_CORE + select IIO_ST_PRESS_I2C if (I2C) + select IIO_ST_PRESS_SPI if (SPI_MASTER) + select IIO_TRIGGERED_BUFFER if (IIO_BUFFER) + help + Say yes here to build support for STMicroelectronics pressure + sensors: LPS001WP, LPS25H, LPS331AP. + + This driver can also be built as a module. If so, these modules + will be created: + - st_pressure (core functions for the driver [it is mandatory]); + - st_pressure_i2c (necessary for the I2C devices [optional*]); + - st_pressure_spi (necessary for the SPI devices [optional*]); + + (*) one of these is necessary to do something. + +config IIO_ST_PRESS_I2C + tristate + depends on IIO_ST_PRESS + depends on IIO_ST_SENSORS_I2C + +config IIO_ST_PRESS_SPI + tristate + depends on IIO_ST_PRESS + depends on IIO_ST_SENSORS_SPI + +config T5403 + tristate "EPCOS T5403 digital barometric pressure sensor driver" + depends on I2C + help + Say yes here to build support for the EPCOS T5403 pressure sensor + connected via I2C. + + To compile this driver as a module, choose M here: the module + will be called t5403. + +endmenu |