summaryrefslogtreecommitdiff
path: root/drivers/iio/pressure
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/iio/pressure')
-rw-r--r--drivers/iio/pressure/Kconfig43
-rw-r--r--drivers/iio/pressure/Makefile2
-rw-r--r--drivers/iio/pressure/mpl115.c66
-rw-r--r--drivers/iio/pressure/mpl115.h24
-rw-r--r--drivers/iio/pressure/mpl115_i2c.c67
-rw-r--r--drivers/iio/pressure/mpl115_spi.c106
-rw-r--r--drivers/iio/pressure/ms5611.h4
-rw-r--r--drivers/iio/pressure/ms5611_core.c122
-rw-r--r--drivers/iio/pressure/ms5611_i2c.c11
-rw-r--r--drivers/iio/pressure/ms5611_spi.c12
-rw-r--r--drivers/iio/pressure/ms5637.c2
-rw-r--r--drivers/iio/pressure/st_pressure_core.c8
-rw-r--r--drivers/iio/pressure/t5403.c2
13 files changed, 398 insertions, 71 deletions
diff --git a/drivers/iio/pressure/Kconfig b/drivers/iio/pressure/Kconfig
index 6f2e7c9ac..31c0e1fd2 100644
--- a/drivers/iio/pressure/Kconfig
+++ b/drivers/iio/pressure/Kconfig
@@ -10,11 +10,11 @@ config BMP280
depends on I2C
select REGMAP_I2C
help
- Say yes here to build support for Bosch Sensortec BMP280
- pressure and temperature sensor.
+ Say yes here to build support for Bosch Sensortec BMP280
+ pressure and temperature sensor.
- To compile this driver as a module, choose M here: the module
- will be called bmp280.
+ To compile this driver as a module, choose M here: the module
+ will be called bmp280.
config HID_SENSOR_PRESS
depends on HID_SENSOR_HUB
@@ -27,18 +27,33 @@ config HID_SENSOR_PRESS
Say yes here to build support for the HID SENSOR
Pressure driver
- To compile this driver as a module, choose M here: the module
- will be called hid-sensor-press.
+ To compile this driver as a module, choose M here: the module
+ will be called hid-sensor-press.
config MPL115
+ tristate
+
+config MPL115_I2C
tristate "Freescale MPL115A2 pressure sensor driver"
depends on I2C
+ select MPL115
help
Say yes here to build support for the Freescale MPL115A2
pressure sensor connected via I2C.
- To compile this driver as a module, choose M here: the module
- will be called mpl115.
+ To compile this driver as a module, choose M here: the module
+ will be called mpl115_i2c.
+
+config MPL115_SPI
+ tristate "Freescale MPL115A1 pressure sensor driver"
+ depends on SPI_MASTER
+ select MPL115
+ help
+ Say yes here to build support for the Freescale MPL115A1
+ pressure sensor connected via SPI.
+
+ To compile this driver as a module, choose M here: the module
+ will be called mpl115_spi.
config MPL3115
tristate "Freescale MPL3115A2 pressure sensor driver"
@@ -49,11 +64,13 @@ config MPL3115
Say yes here to build support for the Freescale MPL3115A2
pressure sensor / altimeter.
- To compile this driver as a module, choose M here: the module
- will be called mpl3115.
+ To compile this driver as a module, choose M here: the module
+ will be called mpl3115.
config MS5611
tristate "Measurement Specialties MS5611 pressure sensor driver"
+ select IIO_BUFFER
+ select IIO_TRIGGERED_BUFFER
help
Say Y here to build support for the Measurement Specialties
MS5611, MS5607 pressure and temperature sensors.
@@ -82,7 +99,7 @@ config MS5611_SPI
config MS5637
tristate "Measurement Specialties MS5637 pressure & temperature sensor"
depends on I2C
- select IIO_MS_SENSORS_I2C
+ select IIO_MS_SENSORS_I2C
help
If you say yes here you get support for the Measurement Specialties
MS5637 pressure and temperature sensor.
@@ -128,7 +145,7 @@ config T5403
Say yes here to build support for the EPCOS T5403 pressure sensor
connected via I2C.
- To compile this driver as a module, choose M here: the module
- will be called t5403.
+ To compile this driver as a module, choose M here: the module
+ will be called t5403.
endmenu
diff --git a/drivers/iio/pressure/Makefile b/drivers/iio/pressure/Makefile
index 46571c968..d336af14f 100644
--- a/drivers/iio/pressure/Makefile
+++ b/drivers/iio/pressure/Makefile
@@ -6,6 +6,8 @@
obj-$(CONFIG_BMP280) += bmp280.o
obj-$(CONFIG_HID_SENSOR_PRESS) += hid-sensor-press.o
obj-$(CONFIG_MPL115) += mpl115.o
+obj-$(CONFIG_MPL115_I2C) += mpl115_i2c.o
+obj-$(CONFIG_MPL115_SPI) += mpl115_spi.o
obj-$(CONFIG_MPL3115) += mpl3115.o
obj-$(CONFIG_MS5611) += ms5611_core.o
obj-$(CONFIG_MS5611_I2C) += ms5611_i2c.o
diff --git a/drivers/iio/pressure/mpl115.c b/drivers/iio/pressure/mpl115.c
index a0d7deeac..73f2f0c46 100644
--- a/drivers/iio/pressure/mpl115.c
+++ b/drivers/iio/pressure/mpl115.c
@@ -1,5 +1,5 @@
/*
- * mpl115.c - Support for Freescale MPL115A2 pressure/temperature sensor
+ * mpl115.c - Support for Freescale MPL115A pressure/temperature sensor
*
* Copyright (c) 2014 Peter Meerwald <pmeerw@pmeerw.net>
*
@@ -7,17 +7,16 @@
* the GNU General Public License. See the file COPYING in the main
* directory of this archive for more details.
*
- * (7-bit I2C slave address 0x60)
- *
* TODO: shutdown pin
*
*/
#include <linux/module.h>
-#include <linux/i2c.h>
#include <linux/iio/iio.h>
#include <linux/delay.h>
+#include "mpl115.h"
+
#define MPL115_PADC 0x00 /* pressure ADC output value, MSB first, 10 bit */
#define MPL115_TADC 0x02 /* temperature ADC output value, MSB first, 10 bit */
#define MPL115_A0 0x04 /* 12 bit integer, 3 bit fraction */
@@ -27,16 +26,18 @@
#define MPL115_CONVERT 0x12 /* convert temperature and pressure */
struct mpl115_data {
- struct i2c_client *client;
+ struct device *dev;
struct mutex lock;
s16 a0;
s16 b1, b2;
s16 c12;
+ const struct mpl115_ops *ops;
};
static int mpl115_request(struct mpl115_data *data)
{
- int ret = i2c_smbus_write_byte_data(data->client, MPL115_CONVERT, 0);
+ int ret = data->ops->write(data->dev, MPL115_CONVERT, 0);
+
if (ret < 0)
return ret;
@@ -57,12 +58,12 @@ static int mpl115_comp_pressure(struct mpl115_data *data, int *val, int *val2)
if (ret < 0)
goto done;
- ret = i2c_smbus_read_word_swapped(data->client, MPL115_PADC);
+ ret = data->ops->read(data->dev, MPL115_PADC);
if (ret < 0)
goto done;
padc = ret >> 6;
- ret = i2c_smbus_read_word_swapped(data->client, MPL115_TADC);
+ ret = data->ops->read(data->dev, MPL115_TADC);
if (ret < 0)
goto done;
tadc = ret >> 6;
@@ -90,7 +91,7 @@ static int mpl115_read_temp(struct mpl115_data *data)
ret = mpl115_request(data);
if (ret < 0)
goto done;
- ret = i2c_smbus_read_word_swapped(data->client, MPL115_TADC);
+ ret = data->ops->read(data->dev, MPL115_TADC);
done:
mutex_unlock(&data->lock);
return ret;
@@ -145,66 +146,53 @@ static const struct iio_info mpl115_info = {
.driver_module = THIS_MODULE,
};
-static int mpl115_probe(struct i2c_client *client,
- const struct i2c_device_id *id)
+int mpl115_probe(struct device *dev, const char *name,
+ const struct mpl115_ops *ops)
{
struct mpl115_data *data;
struct iio_dev *indio_dev;
int ret;
- if (!i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_WORD_DATA))
- return -ENODEV;
-
- indio_dev = devm_iio_device_alloc(&client->dev, sizeof(*data));
+ indio_dev = devm_iio_device_alloc(dev, sizeof(*data));
if (!indio_dev)
return -ENOMEM;
data = iio_priv(indio_dev);
- data->client = client;
+ data->dev = dev;
+ data->ops = ops;
mutex_init(&data->lock);
- i2c_set_clientdata(client, indio_dev);
indio_dev->info = &mpl115_info;
- indio_dev->name = id->name;
- indio_dev->dev.parent = &client->dev;
+ indio_dev->name = name;
+ indio_dev->dev.parent = dev;
indio_dev->modes = INDIO_DIRECT_MODE;
indio_dev->channels = mpl115_channels;
indio_dev->num_channels = ARRAY_SIZE(mpl115_channels);
- ret = i2c_smbus_read_word_swapped(data->client, MPL115_A0);
+ ret = data->ops->init(data->dev);
+ if (ret)
+ return ret;
+
+ ret = data->ops->read(data->dev, MPL115_A0);
if (ret < 0)
return ret;
data->a0 = ret;
- ret = i2c_smbus_read_word_swapped(data->client, MPL115_B1);
+ ret = data->ops->read(data->dev, MPL115_B1);
if (ret < 0)
return ret;
data->b1 = ret;
- ret = i2c_smbus_read_word_swapped(data->client, MPL115_B2);
+ ret = data->ops->read(data->dev, MPL115_B2);
if (ret < 0)
return ret;
data->b2 = ret;
- ret = i2c_smbus_read_word_swapped(data->client, MPL115_C12);
+ ret = data->ops->read(data->dev, MPL115_C12);
if (ret < 0)
return ret;
data->c12 = ret;
- return devm_iio_device_register(&client->dev, indio_dev);
+ return devm_iio_device_register(dev, indio_dev);
}
-
-static const struct i2c_device_id mpl115_id[] = {
- { "mpl115", 0 },
- { }
-};
-MODULE_DEVICE_TABLE(i2c, mpl115_id);
-
-static struct i2c_driver mpl115_driver = {
- .driver = {
- .name = "mpl115",
- },
- .probe = mpl115_probe,
- .id_table = mpl115_id,
-};
-module_i2c_driver(mpl115_driver);
+EXPORT_SYMBOL_GPL(mpl115_probe);
MODULE_AUTHOR("Peter Meerwald <pmeerw@pmeerw.net>");
MODULE_DESCRIPTION("Freescale MPL115 pressure/temperature driver");
diff --git a/drivers/iio/pressure/mpl115.h b/drivers/iio/pressure/mpl115.h
new file mode 100644
index 000000000..01b652774
--- /dev/null
+++ b/drivers/iio/pressure/mpl115.h
@@ -0,0 +1,24 @@
+/*
+ * Freescale MPL115A pressure/temperature sensor
+ *
+ * Copyright (c) 2014 Peter Meerwald <pmeerw@pmeerw.net>
+ * Copyright (c) 2016 Akinobu Mita <akinobu.mita@gmail.com>
+ *
+ * This file is subject to the terms and conditions of version 2 of
+ * the GNU General Public License. See the file COPYING in the main
+ * directory of this archive for more details.
+ */
+
+#ifndef _MPL115_H_
+#define _MPL115_H_
+
+struct mpl115_ops {
+ int (*init)(struct device *);
+ int (*read)(struct device *, u8);
+ int (*write)(struct device *, u8, u8);
+};
+
+int mpl115_probe(struct device *dev, const char *name,
+ const struct mpl115_ops *ops);
+
+#endif
diff --git a/drivers/iio/pressure/mpl115_i2c.c b/drivers/iio/pressure/mpl115_i2c.c
new file mode 100644
index 000000000..1a29be462
--- /dev/null
+++ b/drivers/iio/pressure/mpl115_i2c.c
@@ -0,0 +1,67 @@
+/*
+ * Freescale MPL115A2 pressure/temperature sensor
+ *
+ * Copyright (c) 2014 Peter Meerwald <pmeerw@pmeerw.net>
+ *
+ * This file is subject to the terms and conditions of version 2 of
+ * the GNU General Public License. See the file COPYING in the main
+ * directory of this archive for more details.
+ *
+ * (7-bit I2C slave address 0x60)
+ *
+ * Datasheet: http://www.nxp.com/files/sensors/doc/data_sheet/MPL115A2.pdf
+ */
+
+#include <linux/module.h>
+#include <linux/i2c.h>
+
+#include "mpl115.h"
+
+static int mpl115_i2c_init(struct device *dev)
+{
+ return 0;
+}
+
+static int mpl115_i2c_read(struct device *dev, u8 address)
+{
+ return i2c_smbus_read_word_swapped(to_i2c_client(dev), address);
+}
+
+static int mpl115_i2c_write(struct device *dev, u8 address, u8 value)
+{
+ return i2c_smbus_write_byte_data(to_i2c_client(dev), address, value);
+}
+
+static const struct mpl115_ops mpl115_i2c_ops = {
+ .init = mpl115_i2c_init,
+ .read = mpl115_i2c_read,
+ .write = mpl115_i2c_write,
+};
+
+static int mpl115_i2c_probe(struct i2c_client *client,
+ const struct i2c_device_id *id)
+{
+ if (!i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_WORD_DATA))
+ return -EOPNOTSUPP;
+
+ return mpl115_probe(&client->dev, id->name, &mpl115_i2c_ops);
+}
+
+static const struct i2c_device_id mpl115_i2c_id[] = {
+ { "mpl115", 0 },
+ { }
+};
+MODULE_DEVICE_TABLE(i2c, mpl115_i2c_id);
+
+static struct i2c_driver mpl115_i2c_driver = {
+ .driver = {
+ .name = "mpl115",
+ },
+ .probe = mpl115_i2c_probe,
+ .id_table = mpl115_i2c_id,
+};
+module_i2c_driver(mpl115_i2c_driver);
+
+MODULE_AUTHOR("Peter Meerwald <pmeerw@pmeerw.net>");
+MODULE_DESCRIPTION("Freescale MPL115A2 pressure/temperature driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/iio/pressure/mpl115_spi.c b/drivers/iio/pressure/mpl115_spi.c
new file mode 100644
index 000000000..9ebf55f5b
--- /dev/null
+++ b/drivers/iio/pressure/mpl115_spi.c
@@ -0,0 +1,106 @@
+/*
+ * Freescale MPL115A1 pressure/temperature sensor
+ *
+ * Copyright (c) 2016 Akinobu Mita <akinobu.mita@gmail.com>
+ *
+ * This file is subject to the terms and conditions of version 2 of
+ * the GNU General Public License. See the file COPYING in the main
+ * directory of this archive for more details.
+ *
+ * Datasheet: http://www.nxp.com/files/sensors/doc/data_sheet/MPL115A1.pdf
+ */
+
+#include <linux/module.h>
+#include <linux/spi/spi.h>
+
+#include "mpl115.h"
+
+#define MPL115_SPI_WRITE(address) ((address) << 1)
+#define MPL115_SPI_READ(address) (0x80 | (address) << 1)
+
+struct mpl115_spi_buf {
+ u8 tx[4];
+ u8 rx[4];
+};
+
+static int mpl115_spi_init(struct device *dev)
+{
+ struct spi_device *spi = to_spi_device(dev);
+ struct mpl115_spi_buf *buf;
+
+ buf = devm_kzalloc(dev, sizeof(*buf), GFP_KERNEL);
+ if (!buf)
+ return -ENOMEM;
+
+ spi_set_drvdata(spi, buf);
+
+ return 0;
+}
+
+static int mpl115_spi_read(struct device *dev, u8 address)
+{
+ struct spi_device *spi = to_spi_device(dev);
+ struct mpl115_spi_buf *buf = spi_get_drvdata(spi);
+ struct spi_transfer xfer = {
+ .tx_buf = buf->tx,
+ .rx_buf = buf->rx,
+ .len = 4,
+ };
+ int ret;
+
+ buf->tx[0] = MPL115_SPI_READ(address);
+ buf->tx[2] = MPL115_SPI_READ(address + 1);
+
+ ret = spi_sync_transfer(spi, &xfer, 1);
+ if (ret)
+ return ret;
+
+ return (buf->rx[1] << 8) | buf->rx[3];
+}
+
+static int mpl115_spi_write(struct device *dev, u8 address, u8 value)
+{
+ struct spi_device *spi = to_spi_device(dev);
+ struct mpl115_spi_buf *buf = spi_get_drvdata(spi);
+ struct spi_transfer xfer = {
+ .tx_buf = buf->tx,
+ .len = 2,
+ };
+
+ buf->tx[0] = MPL115_SPI_WRITE(address);
+ buf->tx[1] = value;
+
+ return spi_sync_transfer(spi, &xfer, 1);
+}
+
+static const struct mpl115_ops mpl115_spi_ops = {
+ .init = mpl115_spi_init,
+ .read = mpl115_spi_read,
+ .write = mpl115_spi_write,
+};
+
+static int mpl115_spi_probe(struct spi_device *spi)
+{
+ const struct spi_device_id *id = spi_get_device_id(spi);
+
+ return mpl115_probe(&spi->dev, id->name, &mpl115_spi_ops);
+}
+
+static const struct spi_device_id mpl115_spi_ids[] = {
+ { "mpl115", 0 },
+ {}
+};
+MODULE_DEVICE_TABLE(spi, mpl115_spi_ids);
+
+static struct spi_driver mpl115_spi_driver = {
+ .driver = {
+ .name = "mpl115",
+ },
+ .probe = mpl115_spi_probe,
+ .id_table = mpl115_spi_ids,
+};
+module_spi_driver(mpl115_spi_driver);
+
+MODULE_AUTHOR("Akinobu Mita <akinobu.mita@gmail.com>");
+MODULE_DESCRIPTION("Freescale MPL115A1 pressure/temperature driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/iio/pressure/ms5611.h b/drivers/iio/pressure/ms5611.h
index 23b93c797..8b08e4b7e 100644
--- a/drivers/iio/pressure/ms5611.h
+++ b/drivers/iio/pressure/ms5611.h
@@ -51,6 +51,8 @@ struct ms5611_state {
struct ms5611_chip_info *chip_info;
};
-int ms5611_probe(struct iio_dev *indio_dev, struct device *dev, int type);
+int ms5611_probe(struct iio_dev *indio_dev, struct device *dev,
+ const char* name, int type);
+int ms5611_remove(struct iio_dev *indio_dev);
#endif /* _MS5611_H */
diff --git a/drivers/iio/pressure/ms5611_core.c b/drivers/iio/pressure/ms5611_core.c
index 2f3d9b4ac..992ad8d3b 100644
--- a/drivers/iio/pressure/ms5611_core.c
+++ b/drivers/iio/pressure/ms5611_core.c
@@ -16,7 +16,11 @@
#include <linux/module.h>
#include <linux/iio/iio.h>
#include <linux/delay.h>
+#include <linux/regulator/consumer.h>
+#include <linux/iio/buffer.h>
+#include <linux/iio/triggered_buffer.h>
+#include <linux/iio/trigger_consumer.h>
#include "ms5611.h"
static bool ms5611_prom_is_valid(u16 *prom, size_t len)
@@ -133,17 +137,17 @@ static int ms5607_temp_and_pressure_compensate(struct ms5611_chip_info *chip_inf
t = 2000 + ((chip_info->prom[6] * dt) >> 23);
if (t < 2000) {
- s64 off2, sens2, t2;
+ s64 off2, sens2, t2, tmp;
t2 = (dt * dt) >> 31;
- off2 = (61 * (t - 2000) * (t - 2000)) >> 4;
- sens2 = off2 << 1;
+ tmp = (t - 2000) * (t - 2000);
+ off2 = (61 * tmp) >> 4;
+ sens2 = tmp << 1;
if (t < -1500) {
- s64 tmp = (t + 1500) * (t + 1500);
-
+ tmp = (t + 1500) * (t + 1500);
off2 += 15 * tmp;
- sens2 += (8 * tmp);
+ sens2 += 8 * tmp;
}
t -= t2;
@@ -173,6 +177,28 @@ static int ms5611_reset(struct iio_dev *indio_dev)
return 0;
}
+static irqreturn_t ms5611_trigger_handler(int irq, void *p)
+{
+ struct iio_poll_func *pf = p;
+ struct iio_dev *indio_dev = pf->indio_dev;
+ struct ms5611_state *st = iio_priv(indio_dev);
+ s32 buf[4]; /* s32 (pressure) + s32 (temp) + 2 * s32 (timestamp) */
+ int ret;
+
+ mutex_lock(&st->lock);
+ ret = ms5611_read_temp_and_pressure(indio_dev, &buf[1], &buf[0]);
+ mutex_unlock(&st->lock);
+ if (ret < 0)
+ goto err;
+
+ iio_push_to_buffers_with_timestamp(indio_dev, buf, iio_get_time_ns());
+
+err:
+ iio_trigger_notify_done(indio_dev->trig);
+
+ return IRQ_HANDLED;
+}
+
static int ms5611_read_raw(struct iio_dev *indio_dev,
struct iio_chan_spec const *chan,
int *val, int *val2, long mask)
@@ -201,11 +227,25 @@ static int ms5611_read_raw(struct iio_dev *indio_dev,
default:
return -EINVAL;
}
+ case IIO_CHAN_INFO_SCALE:
+ switch (chan->type) {
+ case IIO_TEMP:
+ *val = 10;
+ return IIO_VAL_INT;
+ case IIO_PRESSURE:
+ *val = 0;
+ *val2 = 1000;
+ return IIO_VAL_INT_PLUS_MICRO;
+ default:
+ return -EINVAL;
+ }
}
return -EINVAL;
}
+static const unsigned long ms5611_scan_masks[] = {0x3, 0};
+
static struct ms5611_chip_info chip_info_tbl[] = {
[MS5611] = {
.temp_and_pressure_compensate = ms5611_temp_and_pressure_compensate,
@@ -218,12 +258,29 @@ static struct ms5611_chip_info chip_info_tbl[] = {
static const struct iio_chan_spec ms5611_channels[] = {
{
.type = IIO_PRESSURE,
- .info_mask_separate = BIT(IIO_CHAN_INFO_PROCESSED),
+ .info_mask_separate = BIT(IIO_CHAN_INFO_PROCESSED) |
+ BIT(IIO_CHAN_INFO_SCALE),
+ .scan_index = 0,
+ .scan_type = {
+ .sign = 's',
+ .realbits = 32,
+ .storagebits = 32,
+ .endianness = IIO_CPU,
+ },
},
{
.type = IIO_TEMP,
- .info_mask_separate = BIT(IIO_CHAN_INFO_PROCESSED),
- }
+ .info_mask_separate = BIT(IIO_CHAN_INFO_PROCESSED) |
+ BIT(IIO_CHAN_INFO_SCALE),
+ .scan_index = 1,
+ .scan_type = {
+ .sign = 's',
+ .realbits = 32,
+ .storagebits = 32,
+ .endianness = IIO_CPU,
+ },
+ },
+ IIO_CHAN_SOFT_TIMESTAMP(2),
};
static const struct iio_info ms5611_info = {
@@ -234,6 +291,18 @@ static const struct iio_info ms5611_info = {
static int ms5611_init(struct iio_dev *indio_dev)
{
int ret;
+ struct regulator *vdd = devm_regulator_get(indio_dev->dev.parent,
+ "vdd");
+
+ /* Enable attached regulator if any. */
+ if (!IS_ERR(vdd)) {
+ ret = regulator_enable(vdd);
+ if (ret) {
+ dev_err(indio_dev->dev.parent,
+ "failed to enable Vdd supply: %d\n", ret);
+ return ret;
+ }
+ }
ret = ms5611_reset(indio_dev);
if (ret < 0)
@@ -242,7 +311,8 @@ static int ms5611_init(struct iio_dev *indio_dev)
return ms5611_read_prom(indio_dev);
}
-int ms5611_probe(struct iio_dev *indio_dev, struct device *dev, int type)
+int ms5611_probe(struct iio_dev *indio_dev, struct device *dev,
+ const char *name, int type)
{
int ret;
struct ms5611_state *st = iio_priv(indio_dev);
@@ -250,20 +320,48 @@ int ms5611_probe(struct iio_dev *indio_dev, struct device *dev, int type)
mutex_init(&st->lock);
st->chip_info = &chip_info_tbl[type];
indio_dev->dev.parent = dev;
- indio_dev->name = dev->driver->name;
+ indio_dev->name = name;
indio_dev->info = &ms5611_info;
indio_dev->channels = ms5611_channels;
indio_dev->num_channels = ARRAY_SIZE(ms5611_channels);
indio_dev->modes = INDIO_DIRECT_MODE;
+ indio_dev->available_scan_masks = ms5611_scan_masks;
ret = ms5611_init(indio_dev);
if (ret < 0)
return ret;
- return devm_iio_device_register(dev, indio_dev);
+ ret = iio_triggered_buffer_setup(indio_dev, NULL,
+ ms5611_trigger_handler, NULL);
+ if (ret < 0) {
+ dev_err(dev, "iio triggered buffer setup failed\n");
+ return ret;
+ }
+
+ ret = iio_device_register(indio_dev);
+ if (ret < 0) {
+ dev_err(dev, "unable to register iio device\n");
+ goto err_buffer_cleanup;
+ }
+
+ return 0;
+
+err_buffer_cleanup:
+ iio_triggered_buffer_cleanup(indio_dev);
+
+ return ret;
}
EXPORT_SYMBOL(ms5611_probe);
+int ms5611_remove(struct iio_dev *indio_dev)
+{
+ iio_device_unregister(indio_dev);
+ iio_triggered_buffer_cleanup(indio_dev);
+
+ return 0;
+}
+EXPORT_SYMBOL(ms5611_remove);
+
MODULE_AUTHOR("Tomasz Duszynski <tduszyns@gmail.com>");
MODULE_DESCRIPTION("MS5611 core driver");
MODULE_LICENSE("GPL v2");
diff --git a/drivers/iio/pressure/ms5611_i2c.c b/drivers/iio/pressure/ms5611_i2c.c
index 245797d1e..7f6fc8eee 100644
--- a/drivers/iio/pressure/ms5611_i2c.c
+++ b/drivers/iio/pressure/ms5611_i2c.c
@@ -92,19 +92,25 @@ static int ms5611_i2c_probe(struct i2c_client *client,
I2C_FUNC_SMBUS_WRITE_BYTE |
I2C_FUNC_SMBUS_READ_WORD_DATA |
I2C_FUNC_SMBUS_READ_I2C_BLOCK))
- return -ENODEV;
+ return -EOPNOTSUPP;
indio_dev = devm_iio_device_alloc(&client->dev, sizeof(*st));
if (!indio_dev)
return -ENOMEM;
st = iio_priv(indio_dev);
+ i2c_set_clientdata(client, indio_dev);
st->reset = ms5611_i2c_reset;
st->read_prom_word = ms5611_i2c_read_prom_word;
st->read_adc_temp_and_pressure = ms5611_i2c_read_adc_temp_and_pressure;
st->client = client;
- return ms5611_probe(indio_dev, &client->dev, id->driver_data);
+ return ms5611_probe(indio_dev, &client->dev, id->name, id->driver_data);
+}
+
+static int ms5611_i2c_remove(struct i2c_client *client)
+{
+ return ms5611_remove(i2c_get_clientdata(client));
}
static const struct i2c_device_id ms5611_id[] = {
@@ -120,6 +126,7 @@ static struct i2c_driver ms5611_driver = {
},
.id_table = ms5611_id,
.probe = ms5611_i2c_probe,
+ .remove = ms5611_i2c_remove,
};
module_i2c_driver(ms5611_driver);
diff --git a/drivers/iio/pressure/ms5611_spi.c b/drivers/iio/pressure/ms5611_spi.c
index aaa0c4ba9..5cc009e85 100644
--- a/drivers/iio/pressure/ms5611_spi.c
+++ b/drivers/iio/pressure/ms5611_spi.c
@@ -90,6 +90,8 @@ static int ms5611_spi_probe(struct spi_device *spi)
if (!indio_dev)
return -ENOMEM;
+ spi_set_drvdata(spi, indio_dev);
+
spi->mode = SPI_MODE_0;
spi->max_speed_hz = 20000000;
spi->bits_per_word = 8;
@@ -103,8 +105,13 @@ static int ms5611_spi_probe(struct spi_device *spi)
st->read_adc_temp_and_pressure = ms5611_spi_read_adc_temp_and_pressure;
st->client = spi;
- return ms5611_probe(indio_dev, &spi->dev,
- spi_get_device_id(spi)->driver_data);
+ return ms5611_probe(indio_dev, &spi->dev, spi_get_device_id(spi)->name,
+ spi_get_device_id(spi)->driver_data);
+}
+
+static int ms5611_spi_remove(struct spi_device *spi)
+{
+ return ms5611_remove(spi_get_drvdata(spi));
}
static const struct spi_device_id ms5611_id[] = {
@@ -120,6 +127,7 @@ static struct spi_driver ms5611_driver = {
},
.id_table = ms5611_id,
.probe = ms5611_spi_probe,
+ .remove = ms5611_spi_remove,
};
module_spi_driver(ms5611_driver);
diff --git a/drivers/iio/pressure/ms5637.c b/drivers/iio/pressure/ms5637.c
index e8d0e0da9..e68052c11 100644
--- a/drivers/iio/pressure/ms5637.c
+++ b/drivers/iio/pressure/ms5637.c
@@ -136,7 +136,7 @@ static int ms5637_probe(struct i2c_client *client,
I2C_FUNC_SMBUS_READ_I2C_BLOCK)) {
dev_err(&client->dev,
"Adapter does not support some i2c transaction\n");
- return -ENODEV;
+ return -EOPNOTSUPP;
}
indio_dev = devm_iio_device_alloc(&client->dev, sizeof(*dev_data));
diff --git a/drivers/iio/pressure/st_pressure_core.c b/drivers/iio/pressure/st_pressure_core.c
index b39a2fb06..172393ad3 100644
--- a/drivers/iio/pressure/st_pressure_core.c
+++ b/drivers/iio/pressure/st_pressure_core.c
@@ -62,6 +62,8 @@
#define ST_PRESS_LPS331AP_DRDY_IRQ_ADDR 0x22
#define ST_PRESS_LPS331AP_DRDY_IRQ_INT1_MASK 0x04
#define ST_PRESS_LPS331AP_DRDY_IRQ_INT2_MASK 0x20
+#define ST_PRESS_LPS331AP_IHL_IRQ_ADDR 0x22
+#define ST_PRESS_LPS331AP_IHL_IRQ_MASK 0x80
#define ST_PRESS_LPS331AP_MULTIREAD_BIT true
#define ST_PRESS_LPS331AP_TEMP_OFFSET 42500
@@ -100,6 +102,8 @@
#define ST_PRESS_LPS25H_DRDY_IRQ_ADDR 0x23
#define ST_PRESS_LPS25H_DRDY_IRQ_INT1_MASK 0x01
#define ST_PRESS_LPS25H_DRDY_IRQ_INT2_MASK 0x10
+#define ST_PRESS_LPS25H_IHL_IRQ_ADDR 0x22
+#define ST_PRESS_LPS25H_IHL_IRQ_MASK 0x80
#define ST_PRESS_LPS25H_MULTIREAD_BIT true
#define ST_PRESS_LPS25H_TEMP_OFFSET 42500
#define ST_PRESS_LPS25H_OUT_XL_ADDR 0x28
@@ -220,6 +224,8 @@ static const struct st_sensor_settings st_press_sensors_settings[] = {
.addr = ST_PRESS_LPS331AP_DRDY_IRQ_ADDR,
.mask_int1 = ST_PRESS_LPS331AP_DRDY_IRQ_INT1_MASK,
.mask_int2 = ST_PRESS_LPS331AP_DRDY_IRQ_INT2_MASK,
+ .addr_ihl = ST_PRESS_LPS331AP_IHL_IRQ_ADDR,
+ .mask_ihl = ST_PRESS_LPS331AP_IHL_IRQ_MASK,
},
.multi_read_bit = ST_PRESS_LPS331AP_MULTIREAD_BIT,
.bootime = 2,
@@ -304,6 +310,8 @@ static const struct st_sensor_settings st_press_sensors_settings[] = {
.addr = ST_PRESS_LPS25H_DRDY_IRQ_ADDR,
.mask_int1 = ST_PRESS_LPS25H_DRDY_IRQ_INT1_MASK,
.mask_int2 = ST_PRESS_LPS25H_DRDY_IRQ_INT2_MASK,
+ .addr_ihl = ST_PRESS_LPS25H_IHL_IRQ_ADDR,
+ .mask_ihl = ST_PRESS_LPS25H_IHL_IRQ_MASK,
},
.multi_read_bit = ST_PRESS_LPS25H_MULTIREAD_BIT,
.bootime = 2,
diff --git a/drivers/iio/pressure/t5403.c b/drivers/iio/pressure/t5403.c
index e11cd3938..2667e7172 100644
--- a/drivers/iio/pressure/t5403.c
+++ b/drivers/iio/pressure/t5403.c
@@ -221,7 +221,7 @@ static int t5403_probe(struct i2c_client *client,
if (!i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_WORD_DATA |
I2C_FUNC_SMBUS_I2C_BLOCK))
- return -ENODEV;
+ return -EOPNOTSUPP;
ret = i2c_smbus_read_byte_data(client, T5403_SLAVE_ADDR);
if (ret < 0)