summaryrefslogtreecommitdiff
path: root/drivers/iio
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/iio')
-rw-r--r--drivers/iio/pressure/bmp280.c922
1 files changed, 0 insertions, 922 deletions
diff --git a/drivers/iio/pressure/bmp280.c b/drivers/iio/pressure/bmp280.c
deleted file mode 100644
index 724452d61..000000000
--- a/drivers/iio/pressure/bmp280.c
+++ /dev/null
@@ -1,922 +0,0 @@
-/*
- * Copyright (c) 2014 Intel Corporation
- *
- * Driver for Bosch Sensortec BMP180 and BMP280 digital pressure sensor.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * Datasheet:
- * https://ae-bst.resource.bosch.com/media/_tech/media/datasheets/BST-BMP180-DS000-121.pdf
- * https://ae-bst.resource.bosch.com/media/_tech/media/datasheets/BST-BMP280-DS001-12.pdf
- */
-
-#define pr_fmt(fmt) "bmp280: " fmt
-
-#include <linux/module.h>
-#include <linux/i2c.h>
-#include <linux/acpi.h>
-#include <linux/regmap.h>
-#include <linux/delay.h>
-#include <linux/iio/iio.h>
-#include <linux/iio/sysfs.h>
-
-/* BMP280 specific registers */
-#define BMP280_REG_TEMP_XLSB 0xFC
-#define BMP280_REG_TEMP_LSB 0xFB
-#define BMP280_REG_TEMP_MSB 0xFA
-#define BMP280_REG_PRESS_XLSB 0xF9
-#define BMP280_REG_PRESS_LSB 0xF8
-#define BMP280_REG_PRESS_MSB 0xF7
-
-#define BMP280_REG_CONFIG 0xF5
-#define BMP280_REG_STATUS 0xF3
-
-#define BMP280_REG_COMP_TEMP_START 0x88
-#define BMP280_COMP_TEMP_REG_COUNT 6
-
-#define BMP280_REG_COMP_PRESS_START 0x8E
-#define BMP280_COMP_PRESS_REG_COUNT 18
-
-#define BMP280_FILTER_MASK (BIT(4) | BIT(3) | BIT(2))
-#define BMP280_FILTER_OFF 0
-#define BMP280_FILTER_2X BIT(2)
-#define BMP280_FILTER_4X BIT(3)
-#define BMP280_FILTER_8X (BIT(3) | BIT(2))
-#define BMP280_FILTER_16X BIT(4)
-
-#define BMP280_OSRS_TEMP_MASK (BIT(7) | BIT(6) | BIT(5))
-#define BMP280_OSRS_TEMP_SKIP 0
-#define BMP280_OSRS_TEMP_X(osrs_t) ((osrs_t) << 5)
-#define BMP280_OSRS_TEMP_1X BMP280_OSRS_TEMP_X(1)
-#define BMP280_OSRS_TEMP_2X BMP280_OSRS_TEMP_X(2)
-#define BMP280_OSRS_TEMP_4X BMP280_OSRS_TEMP_X(3)
-#define BMP280_OSRS_TEMP_8X BMP280_OSRS_TEMP_X(4)
-#define BMP280_OSRS_TEMP_16X BMP280_OSRS_TEMP_X(5)
-
-#define BMP280_OSRS_PRESS_MASK (BIT(4) | BIT(3) | BIT(2))
-#define BMP280_OSRS_PRESS_SKIP 0
-#define BMP280_OSRS_PRESS_X(osrs_p) ((osrs_p) << 2)
-#define BMP280_OSRS_PRESS_1X BMP280_OSRS_PRESS_X(1)
-#define BMP280_OSRS_PRESS_2X BMP280_OSRS_PRESS_X(2)
-#define BMP280_OSRS_PRESS_4X BMP280_OSRS_PRESS_X(3)
-#define BMP280_OSRS_PRESS_8X BMP280_OSRS_PRESS_X(4)
-#define BMP280_OSRS_PRESS_16X BMP280_OSRS_PRESS_X(5)
-
-#define BMP280_MODE_MASK (BIT(1) | BIT(0))
-#define BMP280_MODE_SLEEP 0
-#define BMP280_MODE_FORCED BIT(0)
-#define BMP280_MODE_NORMAL (BIT(1) | BIT(0))
-
-/* BMP180 specific registers */
-#define BMP180_REG_OUT_XLSB 0xF8
-#define BMP180_REG_OUT_LSB 0xF7
-#define BMP180_REG_OUT_MSB 0xF6
-
-#define BMP180_REG_CALIB_START 0xAA
-#define BMP180_REG_CALIB_COUNT 22
-
-#define BMP180_MEAS_SCO BIT(5)
-#define BMP180_MEAS_TEMP (0x0E | BMP180_MEAS_SCO)
-#define BMP180_MEAS_PRESS_X(oss) ((oss) << 6 | 0x14 | BMP180_MEAS_SCO)
-#define BMP180_MEAS_PRESS_1X BMP180_MEAS_PRESS_X(0)
-#define BMP180_MEAS_PRESS_2X BMP180_MEAS_PRESS_X(1)
-#define BMP180_MEAS_PRESS_4X BMP180_MEAS_PRESS_X(2)
-#define BMP180_MEAS_PRESS_8X BMP180_MEAS_PRESS_X(3)
-
-/* BMP180 and BMP280 common registers */
-#define BMP280_REG_CTRL_MEAS 0xF4
-#define BMP280_REG_RESET 0xE0
-#define BMP280_REG_ID 0xD0
-
-#define BMP180_CHIP_ID 0x55
-#define BMP280_CHIP_ID 0x58
-#define BMP280_SOFT_RESET_VAL 0xB6
-
-struct bmp280_data {
- struct i2c_client *client;
- struct mutex lock;
- struct regmap *regmap;
- const struct bmp280_chip_info *chip_info;
-
- /* log of base 2 of oversampling rate */
- u8 oversampling_press;
- u8 oversampling_temp;
-
- /*
- * Carryover value from temperature conversion, used in pressure
- * calculation.
- */
- s32 t_fine;
-};
-
-struct bmp280_chip_info {
- const struct regmap_config *regmap_config;
-
- const int *oversampling_temp_avail;
- int num_oversampling_temp_avail;
-
- const int *oversampling_press_avail;
- int num_oversampling_press_avail;
-
- int (*chip_config)(struct bmp280_data *);
- int (*read_temp)(struct bmp280_data *, int *);
- int (*read_press)(struct bmp280_data *, int *, int *);
-};
-
-/*
- * These enums are used for indexing into the array of compensation
- * parameters for BMP280.
- */
-enum { T1, T2, T3 };
-enum { P1, P2, P3, P4, P5, P6, P7, P8, P9 };
-
-static const struct iio_chan_spec bmp280_channels[] = {
- {
- .type = IIO_PRESSURE,
- .info_mask_separate = BIT(IIO_CHAN_INFO_PROCESSED) |
- BIT(IIO_CHAN_INFO_OVERSAMPLING_RATIO),
- },
- {
- .type = IIO_TEMP,
- .info_mask_separate = BIT(IIO_CHAN_INFO_PROCESSED) |
- BIT(IIO_CHAN_INFO_OVERSAMPLING_RATIO),
- },
-};
-
-static bool bmp280_is_writeable_reg(struct device *dev, unsigned int reg)
-{
- switch (reg) {
- case BMP280_REG_CONFIG:
- case BMP280_REG_CTRL_MEAS:
- case BMP280_REG_RESET:
- return true;
- default:
- return false;
- };
-}
-
-static bool bmp280_is_volatile_reg(struct device *dev, unsigned int reg)
-{
- switch (reg) {
- case BMP280_REG_TEMP_XLSB:
- case BMP280_REG_TEMP_LSB:
- case BMP280_REG_TEMP_MSB:
- case BMP280_REG_PRESS_XLSB:
- case BMP280_REG_PRESS_LSB:
- case BMP280_REG_PRESS_MSB:
- case BMP280_REG_STATUS:
- return true;
- default:
- return false;
- }
-}
-
-static const struct regmap_config bmp280_regmap_config = {
- .reg_bits = 8,
- .val_bits = 8,
-
- .max_register = BMP280_REG_TEMP_XLSB,
- .cache_type = REGCACHE_RBTREE,
-
- .writeable_reg = bmp280_is_writeable_reg,
- .volatile_reg = bmp280_is_volatile_reg,
-};
-
-/*
- * Returns temperature in DegC, resolution is 0.01 DegC. Output value of
- * "5123" equals 51.23 DegC. t_fine carries fine temperature as global
- * value.
- *
- * Taken from datasheet, Section 3.11.3, "Compensation formula".
- */
-static s32 bmp280_compensate_temp(struct bmp280_data *data,
- s32 adc_temp)
-{
- int ret;
- s32 var1, var2;
- __le16 buf[BMP280_COMP_TEMP_REG_COUNT / 2];
-
- ret = regmap_bulk_read(data->regmap, BMP280_REG_COMP_TEMP_START,
- buf, BMP280_COMP_TEMP_REG_COUNT);
- if (ret < 0) {
- dev_err(&data->client->dev,
- "failed to read temperature calibration parameters\n");
- return ret;
- }
-
- /*
- * The double casts are necessary because le16_to_cpu returns an
- * unsigned 16-bit value. Casting that value directly to a
- * signed 32-bit will not do proper sign extension.
- *
- * Conversely, T1 and P1 are unsigned values, so they can be
- * cast straight to the larger type.
- */
- var1 = (((adc_temp >> 3) - ((s32)le16_to_cpu(buf[T1]) << 1)) *
- ((s32)(s16)le16_to_cpu(buf[T2]))) >> 11;
- var2 = (((((adc_temp >> 4) - ((s32)le16_to_cpu(buf[T1]))) *
- ((adc_temp >> 4) - ((s32)le16_to_cpu(buf[T1])))) >> 12) *
- ((s32)(s16)le16_to_cpu(buf[T3]))) >> 14;
- data->t_fine = var1 + var2;
-
- return (data->t_fine * 5 + 128) >> 8;
-}
-
-/*
- * Returns pressure in Pa as unsigned 32 bit integer in Q24.8 format (24
- * integer bits and 8 fractional bits). Output value of "24674867"
- * represents 24674867/256 = 96386.2 Pa = 963.862 hPa
- *
- * Taken from datasheet, Section 3.11.3, "Compensation formula".
- */
-static u32 bmp280_compensate_press(struct bmp280_data *data,
- s32 adc_press)
-{
- int ret;
- s64 var1, var2, p;
- __le16 buf[BMP280_COMP_PRESS_REG_COUNT / 2];
-
- ret = regmap_bulk_read(data->regmap, BMP280_REG_COMP_PRESS_START,
- buf, BMP280_COMP_PRESS_REG_COUNT);
- if (ret < 0) {
- dev_err(&data->client->dev,
- "failed to read pressure calibration parameters\n");
- return ret;
- }
-
- var1 = ((s64)data->t_fine) - 128000;
- var2 = var1 * var1 * (s64)(s16)le16_to_cpu(buf[P6]);
- var2 += (var1 * (s64)(s16)le16_to_cpu(buf[P5])) << 17;
- var2 += ((s64)(s16)le16_to_cpu(buf[P4])) << 35;
- var1 = ((var1 * var1 * (s64)(s16)le16_to_cpu(buf[P3])) >> 8) +
- ((var1 * (s64)(s16)le16_to_cpu(buf[P2])) << 12);
- var1 = ((((s64)1) << 47) + var1) * ((s64)le16_to_cpu(buf[P1])) >> 33;
-
- if (var1 == 0)
- return 0;
-
- p = ((((s64)1048576 - adc_press) << 31) - var2) * 3125;
- p = div64_s64(p, var1);
- var1 = (((s64)(s16)le16_to_cpu(buf[P9])) * (p >> 13) * (p >> 13)) >> 25;
- var2 = (((s64)(s16)le16_to_cpu(buf[P8])) * p) >> 19;
- p = ((p + var1 + var2) >> 8) + (((s64)(s16)le16_to_cpu(buf[P7])) << 4);
-
- return (u32)p;
-}
-
-static int bmp280_read_temp(struct bmp280_data *data,
- int *val)
-{
- int ret;
- __be32 tmp = 0;
- s32 adc_temp, comp_temp;
-
- ret = regmap_bulk_read(data->regmap, BMP280_REG_TEMP_MSB,
- (u8 *) &tmp, 3);
- if (ret < 0) {
- dev_err(&data->client->dev, "failed to read temperature\n");
- return ret;
- }
-
- adc_temp = be32_to_cpu(tmp) >> 12;
- comp_temp = bmp280_compensate_temp(data, adc_temp);
-
- /*
- * val might be NULL if we're called by the read_press routine,
- * who only cares about the carry over t_fine value.
- */
- if (val) {
- *val = comp_temp * 10;
- return IIO_VAL_INT;
- }
-
- return 0;
-}
-
-static int bmp280_read_press(struct bmp280_data *data,
- int *val, int *val2)
-{
- int ret;
- __be32 tmp = 0;
- s32 adc_press;
- u32 comp_press;
-
- /* Read and compensate temperature so we get a reading of t_fine. */
- ret = bmp280_read_temp(data, NULL);
- if (ret < 0)
- return ret;
-
- ret = regmap_bulk_read(data->regmap, BMP280_REG_PRESS_MSB,
- (u8 *) &tmp, 3);
- if (ret < 0) {
- dev_err(&data->client->dev, "failed to read pressure\n");
- return ret;
- }
-
- adc_press = be32_to_cpu(tmp) >> 12;
- comp_press = bmp280_compensate_press(data, adc_press);
-
- *val = comp_press;
- *val2 = 256000;
-
- return IIO_VAL_FRACTIONAL;
-}
-
-static int bmp280_read_raw(struct iio_dev *indio_dev,
- struct iio_chan_spec const *chan,
- int *val, int *val2, long mask)
-{
- int ret;
- struct bmp280_data *data = iio_priv(indio_dev);
-
- mutex_lock(&data->lock);
-
- switch (mask) {
- case IIO_CHAN_INFO_PROCESSED:
- switch (chan->type) {
- case IIO_PRESSURE:
- ret = data->chip_info->read_press(data, val, val2);
- break;
- case IIO_TEMP:
- ret = data->chip_info->read_temp(data, val);
- break;
- default:
- ret = -EINVAL;
- break;
- }
- break;
- case IIO_CHAN_INFO_OVERSAMPLING_RATIO:
- switch (chan->type) {
- case IIO_PRESSURE:
- *val = 1 << data->oversampling_press;
- ret = IIO_VAL_INT;
- break;
- case IIO_TEMP:
- *val = 1 << data->oversampling_temp;
- ret = IIO_VAL_INT;
- break;
- default:
- ret = -EINVAL;
- break;
- }
- break;
- default:
- ret = -EINVAL;
- break;
- }
-
- mutex_unlock(&data->lock);
-
- return ret;
-}
-
-static int bmp280_write_oversampling_ratio_temp(struct bmp280_data *data,
- int val)
-{
- int i;
- const int *avail = data->chip_info->oversampling_temp_avail;
- const int n = data->chip_info->num_oversampling_temp_avail;
-
- for (i = 0; i < n; i++) {
- if (avail[i] == val) {
- data->oversampling_temp = ilog2(val);
-
- return data->chip_info->chip_config(data);
- }
- }
- return -EINVAL;
-}
-
-static int bmp280_write_oversampling_ratio_press(struct bmp280_data *data,
- int val)
-{
- int i;
- const int *avail = data->chip_info->oversampling_press_avail;
- const int n = data->chip_info->num_oversampling_press_avail;
-
- for (i = 0; i < n; i++) {
- if (avail[i] == val) {
- data->oversampling_press = ilog2(val);
-
- return data->chip_info->chip_config(data);
- }
- }
- return -EINVAL;
-}
-
-static int bmp280_write_raw(struct iio_dev *indio_dev,
- struct iio_chan_spec const *chan,
- int val, int val2, long mask)
-{
- int ret = 0;
- struct bmp280_data *data = iio_priv(indio_dev);
-
- switch (mask) {
- case IIO_CHAN_INFO_OVERSAMPLING_RATIO:
- mutex_lock(&data->lock);
- switch (chan->type) {
- case IIO_PRESSURE:
- ret = bmp280_write_oversampling_ratio_press(data, val);
- break;
- case IIO_TEMP:
- ret = bmp280_write_oversampling_ratio_temp(data, val);
- break;
- default:
- ret = -EINVAL;
- break;
- }
- mutex_unlock(&data->lock);
- break;
- default:
- return -EINVAL;
- }
-
- return ret;
-}
-
-static ssize_t bmp280_show_avail(char *buf, const int *vals, const int n)
-{
- size_t len = 0;
- int i;
-
- for (i = 0; i < n; i++)
- len += scnprintf(buf + len, PAGE_SIZE - len, "%d ", vals[i]);
-
- buf[len - 1] = '\n';
-
- return len;
-}
-
-static ssize_t bmp280_show_temp_oversampling_avail(struct device *dev,
- struct device_attribute *attr, char *buf)
-{
- struct bmp280_data *data = iio_priv(dev_to_iio_dev(dev));
-
- return bmp280_show_avail(buf, data->chip_info->oversampling_temp_avail,
- data->chip_info->num_oversampling_temp_avail);
-}
-
-static ssize_t bmp280_show_press_oversampling_avail(struct device *dev,
- struct device_attribute *attr, char *buf)
-{
- struct bmp280_data *data = iio_priv(dev_to_iio_dev(dev));
-
- return bmp280_show_avail(buf, data->chip_info->oversampling_press_avail,
- data->chip_info->num_oversampling_press_avail);
-}
-
-static IIO_DEVICE_ATTR(in_temp_oversampling_ratio_available,
- S_IRUGO, bmp280_show_temp_oversampling_avail, NULL, 0);
-
-static IIO_DEVICE_ATTR(in_pressure_oversampling_ratio_available,
- S_IRUGO, bmp280_show_press_oversampling_avail, NULL, 0);
-
-static struct attribute *bmp280_attributes[] = {
- &iio_dev_attr_in_temp_oversampling_ratio_available.dev_attr.attr,
- &iio_dev_attr_in_pressure_oversampling_ratio_available.dev_attr.attr,
- NULL,
-};
-
-static const struct attribute_group bmp280_attrs_group = {
- .attrs = bmp280_attributes,
-};
-
-static const struct iio_info bmp280_info = {
- .driver_module = THIS_MODULE,
- .read_raw = &bmp280_read_raw,
- .write_raw = &bmp280_write_raw,
- .attrs = &bmp280_attrs_group,
-};
-
-static int bmp280_chip_config(struct bmp280_data *data)
-{
- int ret;
- u8 osrs = BMP280_OSRS_TEMP_X(data->oversampling_temp + 1) |
- BMP280_OSRS_PRESS_X(data->oversampling_press + 1);
-
- ret = regmap_update_bits(data->regmap, BMP280_REG_CTRL_MEAS,
- BMP280_OSRS_TEMP_MASK |
- BMP280_OSRS_PRESS_MASK |
- BMP280_MODE_MASK,
- osrs | BMP280_MODE_NORMAL);
- if (ret < 0) {
- dev_err(&data->client->dev,
- "failed to write ctrl_meas register\n");
- return ret;
- }
-
- ret = regmap_update_bits(data->regmap, BMP280_REG_CONFIG,
- BMP280_FILTER_MASK,
- BMP280_FILTER_4X);
- if (ret < 0) {
- dev_err(&data->client->dev,
- "failed to write config register\n");
- return ret;
- }
-
- return ret;
-}
-
-static const int bmp280_oversampling_avail[] = { 1, 2, 4, 8, 16 };
-
-static const struct bmp280_chip_info bmp280_chip_info = {
- .regmap_config = &bmp280_regmap_config,
-
- .oversampling_temp_avail = bmp280_oversampling_avail,
- .num_oversampling_temp_avail = ARRAY_SIZE(bmp280_oversampling_avail),
-
- .oversampling_press_avail = bmp280_oversampling_avail,
- .num_oversampling_press_avail = ARRAY_SIZE(bmp280_oversampling_avail),
-
- .chip_config = bmp280_chip_config,
- .read_temp = bmp280_read_temp,
- .read_press = bmp280_read_press,
-};
-
-static bool bmp180_is_writeable_reg(struct device *dev, unsigned int reg)
-{
- switch (reg) {
- case BMP280_REG_CTRL_MEAS:
- case BMP280_REG_RESET:
- return true;
- default:
- return false;
- };
-}
-
-static bool bmp180_is_volatile_reg(struct device *dev, unsigned int reg)
-{
- switch (reg) {
- case BMP180_REG_OUT_XLSB:
- case BMP180_REG_OUT_LSB:
- case BMP180_REG_OUT_MSB:
- case BMP280_REG_CTRL_MEAS:
- return true;
- default:
- return false;
- }
-}
-
-static const struct regmap_config bmp180_regmap_config = {
- .reg_bits = 8,
- .val_bits = 8,
-
- .max_register = BMP180_REG_OUT_XLSB,
- .cache_type = REGCACHE_RBTREE,
-
- .writeable_reg = bmp180_is_writeable_reg,
- .volatile_reg = bmp180_is_volatile_reg,
-};
-
-static int bmp180_measure(struct bmp280_data *data, u8 ctrl_meas)
-{
- int ret;
- const int conversion_time_max[] = { 4500, 7500, 13500, 25500 };
- unsigned int delay_us;
- unsigned int ctrl;
-
- ret = regmap_write(data->regmap, BMP280_REG_CTRL_MEAS, ctrl_meas);
- if (ret)
- return ret;
-
- if (ctrl_meas == BMP180_MEAS_TEMP)
- delay_us = 4500;
- else
- delay_us = conversion_time_max[data->oversampling_press];
-
- usleep_range(delay_us, delay_us + 1000);
-
- ret = regmap_read(data->regmap, BMP280_REG_CTRL_MEAS, &ctrl);
- if (ret)
- return ret;
-
- /* The value of this bit reset to "0" after conversion is complete */
- if (ctrl & BMP180_MEAS_SCO)
- return -EIO;
-
- return 0;
-}
-
-static int bmp180_read_adc_temp(struct bmp280_data *data, int *val)
-{
- int ret;
- __be16 tmp = 0;
-
- ret = bmp180_measure(data, BMP180_MEAS_TEMP);
- if (ret)
- return ret;
-
- ret = regmap_bulk_read(data->regmap, BMP180_REG_OUT_MSB, (u8 *)&tmp, 2);
- if (ret)
- return ret;
-
- *val = be16_to_cpu(tmp);
-
- return 0;
-}
-
-/*
- * These enums are used for indexing into the array of calibration
- * coefficients for BMP180.
- */
-enum { AC1, AC2, AC3, AC4, AC5, AC6, B1, B2, MB, MC, MD };
-
-struct bmp180_calib {
- s16 AC1;
- s16 AC2;
- s16 AC3;
- u16 AC4;
- u16 AC5;
- u16 AC6;
- s16 B1;
- s16 B2;
- s16 MB;
- s16 MC;
- s16 MD;
-};
-
-static int bmp180_read_calib(struct bmp280_data *data,
- struct bmp180_calib *calib)
-{
- int ret;
- int i;
- __be16 buf[BMP180_REG_CALIB_COUNT / 2];
-
- ret = regmap_bulk_read(data->regmap, BMP180_REG_CALIB_START, buf,
- sizeof(buf));
-
- if (ret < 0)
- return ret;
-
- /* None of the words has the value 0 or 0xFFFF */
- for (i = 0; i < ARRAY_SIZE(buf); i++) {
- if (buf[i] == cpu_to_be16(0) || buf[i] == cpu_to_be16(0xffff))
- return -EIO;
- }
-
- calib->AC1 = be16_to_cpu(buf[AC1]);
- calib->AC2 = be16_to_cpu(buf[AC2]);
- calib->AC3 = be16_to_cpu(buf[AC3]);
- calib->AC4 = be16_to_cpu(buf[AC4]);
- calib->AC5 = be16_to_cpu(buf[AC5]);
- calib->AC6 = be16_to_cpu(buf[AC6]);
- calib->B1 = be16_to_cpu(buf[B1]);
- calib->B2 = be16_to_cpu(buf[B2]);
- calib->MB = be16_to_cpu(buf[MB]);
- calib->MC = be16_to_cpu(buf[MC]);
- calib->MD = be16_to_cpu(buf[MD]);
-
- return 0;
-}
-
-/*
- * Returns temperature in DegC, resolution is 0.1 DegC.
- * t_fine carries fine temperature as global value.
- *
- * Taken from datasheet, Section 3.5, "Calculating pressure and temperature".
- */
-static s32 bmp180_compensate_temp(struct bmp280_data *data, s32 adc_temp)
-{
- int ret;
- s32 x1, x2;
- struct bmp180_calib calib;
-
- ret = bmp180_read_calib(data, &calib);
- if (ret < 0) {
- dev_err(&data->client->dev,
- "failed to read calibration coefficients\n");
- return ret;
- }
-
- x1 = ((adc_temp - calib.AC6) * calib.AC5) >> 15;
- x2 = (calib.MC << 11) / (x1 + calib.MD);
- data->t_fine = x1 + x2;
-
- return (data->t_fine + 8) >> 4;
-}
-
-static int bmp180_read_temp(struct bmp280_data *data, int *val)
-{
- int ret;
- s32 adc_temp, comp_temp;
-
- ret = bmp180_read_adc_temp(data, &adc_temp);
- if (ret)
- return ret;
-
- comp_temp = bmp180_compensate_temp(data, adc_temp);
-
- /*
- * val might be NULL if we're called by the read_press routine,
- * who only cares about the carry over t_fine value.
- */
- if (val) {
- *val = comp_temp * 100;
- return IIO_VAL_INT;
- }
-
- return 0;
-}
-
-static int bmp180_read_adc_press(struct bmp280_data *data, int *val)
-{
- int ret;
- __be32 tmp = 0;
- u8 oss = data->oversampling_press;
-
- ret = bmp180_measure(data, BMP180_MEAS_PRESS_X(oss));
- if (ret)
- return ret;
-
- ret = regmap_bulk_read(data->regmap, BMP180_REG_OUT_MSB, (u8 *)&tmp, 3);
- if (ret)
- return ret;
-
- *val = (be32_to_cpu(tmp) >> 8) >> (8 - oss);
-
- return 0;
-}
-
-/*
- * Returns pressure in Pa, resolution is 1 Pa.
- *
- * Taken from datasheet, Section 3.5, "Calculating pressure and temperature".
- */
-static u32 bmp180_compensate_press(struct bmp280_data *data, s32 adc_press)
-{
- int ret;
- s32 x1, x2, x3, p;
- s32 b3, b6;
- u32 b4, b7;
- s32 oss = data->oversampling_press;
- struct bmp180_calib calib;
-
- ret = bmp180_read_calib(data, &calib);
- if (ret < 0) {
- dev_err(&data->client->dev,
- "failed to read calibration coefficients\n");
- return ret;
- }
-
- b6 = data->t_fine - 4000;
- x1 = (calib.B2 * (b6 * b6 >> 12)) >> 11;
- x2 = calib.AC2 * b6 >> 11;
- x3 = x1 + x2;
- b3 = ((((s32)calib.AC1 * 4 + x3) << oss) + 2) / 4;
- x1 = calib.AC3 * b6 >> 13;
- x2 = (calib.B1 * ((b6 * b6) >> 12)) >> 16;
- x3 = (x1 + x2 + 2) >> 2;
- b4 = calib.AC4 * (u32)(x3 + 32768) >> 15;
- b7 = ((u32)adc_press - b3) * (50000 >> oss);
- if (b7 < 0x80000000)
- p = (b7 * 2) / b4;
- else
- p = (b7 / b4) * 2;
-
- x1 = (p >> 8) * (p >> 8);
- x1 = (x1 * 3038) >> 16;
- x2 = (-7357 * p) >> 16;
-
- return p + ((x1 + x2 + 3791) >> 4);
-}
-
-static int bmp180_read_press(struct bmp280_data *data,
- int *val, int *val2)
-{
- int ret;
- s32 adc_press;
- u32 comp_press;
-
- /* Read and compensate temperature so we get a reading of t_fine. */
- ret = bmp180_read_temp(data, NULL);
- if (ret)
- return ret;
-
- ret = bmp180_read_adc_press(data, &adc_press);
- if (ret)
- return ret;
-
- comp_press = bmp180_compensate_press(data, adc_press);
-
- *val = comp_press;
- *val2 = 1000;
-
- return IIO_VAL_FRACTIONAL;
-}
-
-static int bmp180_chip_config(struct bmp280_data *data)
-{
- return 0;
-}
-
-static const int bmp180_oversampling_temp_avail[] = { 1 };
-static const int bmp180_oversampling_press_avail[] = { 1, 2, 4, 8 };
-
-static const struct bmp280_chip_info bmp180_chip_info = {
- .regmap_config = &bmp180_regmap_config,
-
- .oversampling_temp_avail = bmp180_oversampling_temp_avail,
- .num_oversampling_temp_avail =
- ARRAY_SIZE(bmp180_oversampling_temp_avail),
-
- .oversampling_press_avail = bmp180_oversampling_press_avail,
- .num_oversampling_press_avail =
- ARRAY_SIZE(bmp180_oversampling_press_avail),
-
- .chip_config = bmp180_chip_config,
- .read_temp = bmp180_read_temp,
- .read_press = bmp180_read_press,
-};
-
-static int bmp280_probe(struct i2c_client *client,
- const struct i2c_device_id *id)
-{
- int ret;
- struct iio_dev *indio_dev;
- struct bmp280_data *data;
- unsigned int chip_id;
-
- indio_dev = devm_iio_device_alloc(&client->dev, sizeof(*data));
- if (!indio_dev)
- return -ENOMEM;
-
- data = iio_priv(indio_dev);
- mutex_init(&data->lock);
- data->client = client;
-
- indio_dev->dev.parent = &client->dev;
- indio_dev->name = id->name;
- indio_dev->channels = bmp280_channels;
- indio_dev->num_channels = ARRAY_SIZE(bmp280_channels);
- indio_dev->info = &bmp280_info;
- indio_dev->modes = INDIO_DIRECT_MODE;
-
- switch (id->driver_data) {
- case BMP180_CHIP_ID:
- data->chip_info = &bmp180_chip_info;
- data->oversampling_press = ilog2(8);
- data->oversampling_temp = ilog2(1);
- break;
- case BMP280_CHIP_ID:
- data->chip_info = &bmp280_chip_info;
- data->oversampling_press = ilog2(16);
- data->oversampling_temp = ilog2(2);
- break;
- default:
- return -EINVAL;
- }
-
- data->regmap = devm_regmap_init_i2c(client,
- data->chip_info->regmap_config);
- if (IS_ERR(data->regmap)) {
- dev_err(&client->dev, "failed to allocate register map\n");
- return PTR_ERR(data->regmap);
- }
-
- ret = regmap_read(data->regmap, BMP280_REG_ID, &chip_id);
- if (ret < 0)
- return ret;
- if (chip_id != id->driver_data) {
- dev_err(&client->dev, "bad chip id. expected %lx got %x\n",
- id->driver_data, chip_id);
- return -EINVAL;
- }
-
- ret = data->chip_info->chip_config(data);
- if (ret < 0)
- return ret;
-
- return devm_iio_device_register(&client->dev, indio_dev);
-}
-
-static const struct acpi_device_id bmp280_acpi_match[] = {
- {"BMP0280", BMP280_CHIP_ID },
- {"BMP0180", BMP180_CHIP_ID },
- {"BMP0085", BMP180_CHIP_ID },
- { },
-};
-MODULE_DEVICE_TABLE(acpi, bmp280_acpi_match);
-
-static const struct i2c_device_id bmp280_id[] = {
- {"bmp280", BMP280_CHIP_ID },
- {"bmp180", BMP180_CHIP_ID },
- {"bmp085", BMP180_CHIP_ID },
- { },
-};
-MODULE_DEVICE_TABLE(i2c, bmp280_id);
-
-static struct i2c_driver bmp280_driver = {
- .driver = {
- .name = "bmp280",
- .acpi_match_table = ACPI_PTR(bmp280_acpi_match),
- },
- .probe = bmp280_probe,
- .id_table = bmp280_id,
-};
-module_i2c_driver(bmp280_driver);
-
-MODULE_AUTHOR("Vlad Dogaru <vlad.dogaru@intel.com>");
-MODULE_DESCRIPTION("Driver for Bosch Sensortec BMP180/BMP280 pressure and temperature sensor");
-MODULE_LICENSE("GPL v2");
generated by cgit v1.2.3-54-g00ecf (git 2.45.2) at 2024-12-28 15:52:54 +0000