summaryrefslogtreecommitdiff
path: root/drivers/infiniband/hw/hfi1/qsfp.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/infiniband/hw/hfi1/qsfp.c')
-rw-r--r--drivers/infiniband/hw/hfi1/qsfp.c441
1 files changed, 332 insertions, 109 deletions
diff --git a/drivers/infiniband/hw/hfi1/qsfp.c b/drivers/infiniband/hw/hfi1/qsfp.c
index 9fb561682..4e95ad810 100644
--- a/drivers/infiniband/hw/hfi1/qsfp.c
+++ b/drivers/infiniband/hw/hfi1/qsfp.c
@@ -50,46 +50,285 @@
#include <linux/vmalloc.h>
#include "hfi.h"
-#include "twsi.h"
+
+/* for the given bus number, return the CSR for reading an i2c line */
+static inline u32 i2c_in_csr(u32 bus_num)
+{
+ return bus_num ? ASIC_QSFP2_IN : ASIC_QSFP1_IN;
+}
+
+/* for the given bus number, return the CSR for writing an i2c line */
+static inline u32 i2c_oe_csr(u32 bus_num)
+{
+ return bus_num ? ASIC_QSFP2_OE : ASIC_QSFP1_OE;
+}
+
+static void hfi1_setsda(void *data, int state)
+{
+ struct hfi1_i2c_bus *bus = (struct hfi1_i2c_bus *)data;
+ struct hfi1_devdata *dd = bus->controlling_dd;
+ u64 reg;
+ u32 target_oe;
+
+ target_oe = i2c_oe_csr(bus->num);
+ reg = read_csr(dd, target_oe);
+ /*
+ * The OE bit value is inverted and connected to the pin. When
+ * OE is 0 the pin is left to be pulled up, when the OE is 1
+ * the pin is driven low. This matches the "open drain" or "open
+ * collector" convention.
+ */
+ if (state)
+ reg &= ~QSFP_HFI0_I2CDAT;
+ else
+ reg |= QSFP_HFI0_I2CDAT;
+ write_csr(dd, target_oe, reg);
+ /* do a read to force the write into the chip */
+ (void)read_csr(dd, target_oe);
+}
+
+static void hfi1_setscl(void *data, int state)
+{
+ struct hfi1_i2c_bus *bus = (struct hfi1_i2c_bus *)data;
+ struct hfi1_devdata *dd = bus->controlling_dd;
+ u64 reg;
+ u32 target_oe;
+
+ target_oe = i2c_oe_csr(bus->num);
+ reg = read_csr(dd, target_oe);
+ /*
+ * The OE bit value is inverted and connected to the pin. When
+ * OE is 0 the pin is left to be pulled up, when the OE is 1
+ * the pin is driven low. This matches the "open drain" or "open
+ * collector" convention.
+ */
+ if (state)
+ reg &= ~QSFP_HFI0_I2CCLK;
+ else
+ reg |= QSFP_HFI0_I2CCLK;
+ write_csr(dd, target_oe, reg);
+ /* do a read to force the write into the chip */
+ (void)read_csr(dd, target_oe);
+}
+
+static int hfi1_getsda(void *data)
+{
+ struct hfi1_i2c_bus *bus = (struct hfi1_i2c_bus *)data;
+ u64 reg;
+ u32 target_in;
+
+ hfi1_setsda(data, 1); /* clear OE so we do not pull line down */
+ udelay(2); /* 1us pull up + 250ns hold */
+
+ target_in = i2c_in_csr(bus->num);
+ reg = read_csr(bus->controlling_dd, target_in);
+ return !!(reg & QSFP_HFI0_I2CDAT);
+}
+
+static int hfi1_getscl(void *data)
+{
+ struct hfi1_i2c_bus *bus = (struct hfi1_i2c_bus *)data;
+ u64 reg;
+ u32 target_in;
+
+ hfi1_setscl(data, 1); /* clear OE so we do not pull line down */
+ udelay(2); /* 1us pull up + 250ns hold */
+
+ target_in = i2c_in_csr(bus->num);
+ reg = read_csr(bus->controlling_dd, target_in);
+ return !!(reg & QSFP_HFI0_I2CCLK);
+}
/*
- * QSFP support for hfi driver, using "Two Wire Serial Interface" driver
- * in twsi.c
+ * Allocate and initialize the given i2c bus number.
+ * Returns NULL on failure.
*/
-#define I2C_MAX_RETRY 4
+static struct hfi1_i2c_bus *init_i2c_bus(struct hfi1_devdata *dd,
+ struct hfi1_asic_data *ad, int num)
+{
+ struct hfi1_i2c_bus *bus;
+ int ret;
+
+ bus = kzalloc(sizeof(*bus), GFP_KERNEL);
+ if (!bus)
+ return NULL;
+
+ bus->controlling_dd = dd;
+ bus->num = num; /* our bus number */
+
+ bus->algo.setsda = hfi1_setsda;
+ bus->algo.setscl = hfi1_setscl;
+ bus->algo.getsda = hfi1_getsda;
+ bus->algo.getscl = hfi1_getscl;
+ bus->algo.udelay = 5;
+ bus->algo.timeout = usecs_to_jiffies(50);
+ bus->algo.data = bus;
+
+ bus->adapter.owner = THIS_MODULE;
+ bus->adapter.algo_data = &bus->algo;
+ bus->adapter.dev.parent = &dd->pcidev->dev;
+ snprintf(bus->adapter.name, sizeof(bus->adapter.name),
+ "hfi1_i2c%d", num);
+
+ ret = i2c_bit_add_bus(&bus->adapter);
+ if (ret) {
+ dd_dev_info(dd, "%s: unable to add i2c bus %d, err %d\n",
+ __func__, num, ret);
+ kfree(bus);
+ return NULL;
+ }
+
+ return bus;
+}
/*
- * Raw i2c write. No set-up or lock checking.
+ * Initialize i2c buses.
+ * Return 0 on success, -errno on error.
*/
-static int __i2c_write(struct hfi1_pportdata *ppd, u32 target, int i2c_addr,
- int offset, void *bp, int len)
+int set_up_i2c(struct hfi1_devdata *dd, struct hfi1_asic_data *ad)
{
- struct hfi1_devdata *dd = ppd->dd;
- int ret, cnt;
- u8 *buff = bp;
+ ad->i2c_bus0 = init_i2c_bus(dd, ad, 0);
+ ad->i2c_bus1 = init_i2c_bus(dd, ad, 1);
+ if (!ad->i2c_bus0 || !ad->i2c_bus1)
+ return -ENOMEM;
+ return 0;
+};
- cnt = 0;
- while (cnt < len) {
- int wlen = len - cnt;
+static void clean_i2c_bus(struct hfi1_i2c_bus *bus)
+{
+ if (bus) {
+ i2c_del_adapter(&bus->adapter);
+ kfree(bus);
+ }
+}
- ret = hfi1_twsi_blk_wr(dd, target, i2c_addr, offset,
- buff + cnt, wlen);
- if (ret) {
- /* hfi1_twsi_blk_wr() 1 for error, else 0 */
- return -EIO;
- }
- offset += wlen;
- cnt += wlen;
+void clean_up_i2c(struct hfi1_devdata *dd, struct hfi1_asic_data *ad)
+{
+ clean_i2c_bus(ad->i2c_bus0);
+ ad->i2c_bus0 = NULL;
+ clean_i2c_bus(ad->i2c_bus1);
+ ad->i2c_bus1 = NULL;
+}
+
+static int i2c_bus_write(struct hfi1_devdata *dd, struct hfi1_i2c_bus *i2c,
+ u8 slave_addr, int offset, int offset_size,
+ u8 *data, u16 len)
+{
+ int ret;
+ int num_msgs;
+ u8 offset_bytes[2];
+ struct i2c_msg msgs[2];
+
+ switch (offset_size) {
+ case 0:
+ num_msgs = 1;
+ msgs[0].addr = slave_addr;
+ msgs[0].flags = 0;
+ msgs[0].len = len;
+ msgs[0].buf = data;
+ break;
+ case 2:
+ offset_bytes[1] = (offset >> 8) & 0xff;
+ /* fall through */
+ case 1:
+ num_msgs = 2;
+ offset_bytes[0] = offset & 0xff;
+
+ msgs[0].addr = slave_addr;
+ msgs[0].flags = 0;
+ msgs[0].len = offset_size;
+ msgs[0].buf = offset_bytes;
+
+ msgs[1].addr = slave_addr;
+ msgs[1].flags = I2C_M_NOSTART,
+ msgs[1].len = len;
+ msgs[1].buf = data;
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ i2c->controlling_dd = dd;
+ ret = i2c_transfer(&i2c->adapter, msgs, num_msgs);
+ if (ret != num_msgs) {
+ dd_dev_err(dd, "%s: bus %d, i2c slave 0x%x, offset 0x%x, len 0x%x; write failed, ret %d\n",
+ __func__, i2c->num, slave_addr, offset, len, ret);
+ return ret < 0 ? ret : -EIO;
+ }
+ return 0;
+}
+
+static int i2c_bus_read(struct hfi1_devdata *dd, struct hfi1_i2c_bus *bus,
+ u8 slave_addr, int offset, int offset_size,
+ u8 *data, u16 len)
+{
+ int ret;
+ int num_msgs;
+ u8 offset_bytes[2];
+ struct i2c_msg msgs[2];
+
+ switch (offset_size) {
+ case 0:
+ num_msgs = 1;
+ msgs[0].addr = slave_addr;
+ msgs[0].flags = I2C_M_RD;
+ msgs[0].len = len;
+ msgs[0].buf = data;
+ break;
+ case 2:
+ offset_bytes[1] = (offset >> 8) & 0xff;
+ /* fall through */
+ case 1:
+ num_msgs = 2;
+ offset_bytes[0] = offset & 0xff;
+
+ msgs[0].addr = slave_addr;
+ msgs[0].flags = 0;
+ msgs[0].len = offset_size;
+ msgs[0].buf = offset_bytes;
+
+ msgs[1].addr = slave_addr;
+ msgs[1].flags = I2C_M_RD,
+ msgs[1].len = len;
+ msgs[1].buf = data;
+ break;
+ default:
+ return -EINVAL;
}
- /* Must wait min 20us between qsfp i2c transactions */
- udelay(20);
+ bus->controlling_dd = dd;
+ ret = i2c_transfer(&bus->adapter, msgs, num_msgs);
+ if (ret != num_msgs) {
+ dd_dev_err(dd, "%s: bus %d, i2c slave 0x%x, offset 0x%x, len 0x%x; read failed, ret %d\n",
+ __func__, bus->num, slave_addr, offset, len, ret);
+ return ret < 0 ? ret : -EIO;
+ }
+ return 0;
+}
- return cnt;
+/*
+ * Raw i2c write. No set-up or lock checking.
+ *
+ * Return 0 on success, -errno on error.
+ */
+static int __i2c_write(struct hfi1_pportdata *ppd, u32 target, int i2c_addr,
+ int offset, void *bp, int len)
+{
+ struct hfi1_devdata *dd = ppd->dd;
+ struct hfi1_i2c_bus *bus;
+ u8 slave_addr;
+ int offset_size;
+
+ bus = target ? dd->asic_data->i2c_bus1 : dd->asic_data->i2c_bus0;
+ slave_addr = (i2c_addr & 0xff) >> 1; /* convert to 7-bit addr */
+ offset_size = (i2c_addr >> 8) & 0x3;
+ return i2c_bus_write(dd, bus, slave_addr, offset, offset_size, bp, len);
}
/*
* Caller must hold the i2c chain resource.
+ *
+ * Return number of bytes written, or -errno.
*/
int i2c_write(struct hfi1_pportdata *ppd, u32 target, int i2c_addr, int offset,
void *bp, int len)
@@ -99,63 +338,36 @@ int i2c_write(struct hfi1_pportdata *ppd, u32 target, int i2c_addr, int offset,
if (!check_chip_resource(ppd->dd, i2c_target(target), __func__))
return -EACCES;
- /* make sure the TWSI bus is in a sane state */
- ret = hfi1_twsi_reset(ppd->dd, target);
- if (ret) {
- hfi1_dev_porterr(ppd->dd, ppd->port,
- "I2C chain %d write interface reset failed\n",
- target);
+ ret = __i2c_write(ppd, target, i2c_addr, offset, bp, len);
+ if (ret)
return ret;
- }
- return __i2c_write(ppd, target, i2c_addr, offset, bp, len);
+ return len;
}
/*
* Raw i2c read. No set-up or lock checking.
+ *
+ * Return 0 on success, -errno on error.
*/
static int __i2c_read(struct hfi1_pportdata *ppd, u32 target, int i2c_addr,
int offset, void *bp, int len)
{
struct hfi1_devdata *dd = ppd->dd;
- int ret, cnt, pass = 0;
- int orig_offset = offset;
-
- cnt = 0;
- while (cnt < len) {
- int rlen = len - cnt;
-
- ret = hfi1_twsi_blk_rd(dd, target, i2c_addr, offset,
- bp + cnt, rlen);
- /* Some QSFP's fail first try. Retry as experiment */
- if (ret && cnt == 0 && ++pass < I2C_MAX_RETRY)
- continue;
- if (ret) {
- /* hfi1_twsi_blk_rd() 1 for error, else 0 */
- ret = -EIO;
- goto exit;
- }
- offset += rlen;
- cnt += rlen;
- }
-
- ret = cnt;
-
-exit:
- if (ret < 0) {
- hfi1_dev_porterr(dd, ppd->port,
- "I2C chain %d read failed, addr 0x%x, offset 0x%x, len %d\n",
- target, i2c_addr, orig_offset, len);
- }
-
- /* Must wait min 20us between qsfp i2c transactions */
- udelay(20);
-
- return ret;
+ struct hfi1_i2c_bus *bus;
+ u8 slave_addr;
+ int offset_size;
+
+ bus = target ? dd->asic_data->i2c_bus1 : dd->asic_data->i2c_bus0;
+ slave_addr = (i2c_addr & 0xff) >> 1; /* convert to 7-bit addr */
+ offset_size = (i2c_addr >> 8) & 0x3;
+ return i2c_bus_read(dd, bus, slave_addr, offset, offset_size, bp, len);
}
/*
* Caller must hold the i2c chain resource.
+ *
+ * Return number of bytes read, or -errno.
*/
int i2c_read(struct hfi1_pportdata *ppd, u32 target, int i2c_addr, int offset,
void *bp, int len)
@@ -165,16 +377,11 @@ int i2c_read(struct hfi1_pportdata *ppd, u32 target, int i2c_addr, int offset,
if (!check_chip_resource(ppd->dd, i2c_target(target), __func__))
return -EACCES;
- /* make sure the TWSI bus is in a sane state */
- ret = hfi1_twsi_reset(ppd->dd, target);
- if (ret) {
- hfi1_dev_porterr(ppd->dd, ppd->port,
- "I2C chain %d read interface reset failed\n",
- target);
+ ret = __i2c_read(ppd, target, i2c_addr, offset, bp, len);
+ if (ret)
return ret;
- }
- return __i2c_read(ppd, target, i2c_addr, offset, bp, len);
+ return len;
}
/*
@@ -182,6 +389,8 @@ int i2c_read(struct hfi1_pportdata *ppd, u32 target, int i2c_addr, int offset,
* by writing @addr = ((256 * n) + m)
*
* Caller must hold the i2c chain resource.
+ *
+ * Return number of bytes written or -errno.
*/
int qsfp_write(struct hfi1_pportdata *ppd, u32 target, int addr, void *bp,
int len)
@@ -189,21 +398,12 @@ int qsfp_write(struct hfi1_pportdata *ppd, u32 target, int addr, void *bp,
int count = 0;
int offset;
int nwrite;
- int ret;
+ int ret = 0;
u8 page;
if (!check_chip_resource(ppd->dd, i2c_target(target), __func__))
return -EACCES;
- /* make sure the TWSI bus is in a sane state */
- ret = hfi1_twsi_reset(ppd->dd, target);
- if (ret) {
- hfi1_dev_porterr(ppd->dd, ppd->port,
- "QSFP chain %d write interface reset failed\n",
- target);
- return ret;
- }
-
while (count < len) {
/*
* Set the qsfp page based on a zero-based address
@@ -213,11 +413,12 @@ int qsfp_write(struct hfi1_pportdata *ppd, u32 target, int addr, void *bp,
ret = __i2c_write(ppd, target, QSFP_DEV | QSFP_OFFSET_SIZE,
QSFP_PAGE_SELECT_BYTE_OFFS, &page, 1);
- if (ret != 1) {
+ /* QSFPs require a 5-10msec delay after write operations */
+ mdelay(5);
+ if (ret) {
hfi1_dev_porterr(ppd->dd, ppd->port,
"QSFP chain %d can't write QSFP_PAGE_SELECT_BYTE: %d\n",
target, ret);
- ret = -EIO;
break;
}
@@ -229,11 +430,13 @@ int qsfp_write(struct hfi1_pportdata *ppd, u32 target, int addr, void *bp,
ret = __i2c_write(ppd, target, QSFP_DEV | QSFP_OFFSET_SIZE,
offset, bp + count, nwrite);
- if (ret <= 0) /* stop on error or nothing written */
+ /* QSFPs require a 5-10msec delay after write operations */
+ mdelay(5);
+ if (ret) /* stop on error */
break;
- count += ret;
- addr += ret;
+ count += nwrite;
+ addr += nwrite;
}
if (ret < 0)
@@ -243,7 +446,7 @@ int qsfp_write(struct hfi1_pportdata *ppd, u32 target, int addr, void *bp,
/*
* Perform a stand-alone single QSFP write. Acquire the resource, do the
- * read, then release the resource.
+ * write, then release the resource.
*/
int one_qsfp_write(struct hfi1_pportdata *ppd, u32 target, int addr, void *bp,
int len)
@@ -266,6 +469,8 @@ int one_qsfp_write(struct hfi1_pportdata *ppd, u32 target, int addr, void *bp,
* by reading @addr = ((256 * n) + m)
*
* Caller must hold the i2c chain resource.
+ *
+ * Return the number of bytes read or -errno.
*/
int qsfp_read(struct hfi1_pportdata *ppd, u32 target, int addr, void *bp,
int len)
@@ -273,21 +478,12 @@ int qsfp_read(struct hfi1_pportdata *ppd, u32 target, int addr, void *bp,
int count = 0;
int offset;
int nread;
- int ret;
+ int ret = 0;
u8 page;
if (!check_chip_resource(ppd->dd, i2c_target(target), __func__))
return -EACCES;
- /* make sure the TWSI bus is in a sane state */
- ret = hfi1_twsi_reset(ppd->dd, target);
- if (ret) {
- hfi1_dev_porterr(ppd->dd, ppd->port,
- "QSFP chain %d read interface reset failed\n",
- target);
- return ret;
- }
-
while (count < len) {
/*
* Set the qsfp page based on a zero-based address
@@ -296,11 +492,12 @@ int qsfp_read(struct hfi1_pportdata *ppd, u32 target, int addr, void *bp,
page = (u8)(addr / QSFP_PAGESIZE);
ret = __i2c_write(ppd, target, QSFP_DEV | QSFP_OFFSET_SIZE,
QSFP_PAGE_SELECT_BYTE_OFFS, &page, 1);
- if (ret != 1) {
+ /* QSFPs require a 5-10msec delay after write operations */
+ mdelay(5);
+ if (ret) {
hfi1_dev_porterr(ppd->dd, ppd->port,
"QSFP chain %d can't write QSFP_PAGE_SELECT_BYTE: %d\n",
target, ret);
- ret = -EIO;
break;
}
@@ -310,15 +507,13 @@ int qsfp_read(struct hfi1_pportdata *ppd, u32 target, int addr, void *bp,
if (((addr % QSFP_RW_BOUNDARY) + nread) > QSFP_RW_BOUNDARY)
nread = QSFP_RW_BOUNDARY - (addr % QSFP_RW_BOUNDARY);
- /* QSFPs require a 5-10msec delay after write operations */
- mdelay(5);
ret = __i2c_read(ppd, target, QSFP_DEV | QSFP_OFFSET_SIZE,
offset, bp + count, nread);
- if (ret <= 0) /* stop on error or nothing read */
+ if (ret) /* stop on error */
break;
- count += ret;
- addr += ret;
+ count += nread;
+ addr += nread;
}
if (ret < 0)
@@ -511,8 +706,8 @@ int get_cable_info(struct hfi1_devdata *dd, u32 port_num, u32 addr, u32 len,
u8 *data)
{
struct hfi1_pportdata *ppd;
- u32 excess_len = 0;
- int ret = 0;
+ u32 excess_len = len;
+ int ret = 0, offset = 0;
if (port_num > dd->num_pports || port_num < 1) {
dd_dev_info(dd, "%s: Invalid port number %d\n",
@@ -545,6 +740,34 @@ int get_cable_info(struct hfi1_devdata *dd, u32 port_num, u32 addr, u32 len,
}
memcpy(data, &ppd->qsfp_info.cache[addr], len);
+
+ if (addr <= QSFP_MONITOR_VAL_END &&
+ (addr + len) >= QSFP_MONITOR_VAL_START) {
+ /* Overlap with the dynamic channel monitor range */
+ if (addr < QSFP_MONITOR_VAL_START) {
+ if (addr + len <= QSFP_MONITOR_VAL_END)
+ len = addr + len - QSFP_MONITOR_VAL_START;
+ else
+ len = QSFP_MONITOR_RANGE;
+ offset = QSFP_MONITOR_VAL_START - addr;
+ addr = QSFP_MONITOR_VAL_START;
+ } else if (addr == QSFP_MONITOR_VAL_START) {
+ offset = 0;
+ if (addr + len > QSFP_MONITOR_VAL_END)
+ len = QSFP_MONITOR_RANGE;
+ } else {
+ offset = 0;
+ if (addr + len > QSFP_MONITOR_VAL_END)
+ len = QSFP_MONITOR_VAL_END - addr + 1;
+ }
+ /* Refresh the values of the dynamic monitors from the cable */
+ ret = one_qsfp_read(ppd, dd->hfi1_id, addr, data + offset, len);
+ if (ret != len) {
+ ret = -EAGAIN;
+ goto set_zeroes;
+ }
+ }
+
return 0;
set_zeroes: