summaryrefslogtreecommitdiff
path: root/drivers/infiniband/ulp/ipoib/Kconfig
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/infiniband/ulp/ipoib/Kconfig')
-rw-r--r--drivers/infiniband/ulp/ipoib/Kconfig49
1 files changed, 49 insertions, 0 deletions
diff --git a/drivers/infiniband/ulp/ipoib/Kconfig b/drivers/infiniband/ulp/ipoib/Kconfig
new file mode 100644
index 000000000..cda8eac55
--- /dev/null
+++ b/drivers/infiniband/ulp/ipoib/Kconfig
@@ -0,0 +1,49 @@
+config INFINIBAND_IPOIB
+ tristate "IP-over-InfiniBand"
+ depends on NETDEVICES && INET && (IPV6 || IPV6=n)
+ ---help---
+ Support for the IP-over-InfiniBand protocol (IPoIB). This
+ transports IP packets over InfiniBand so you can use your IB
+ device as a fancy NIC.
+
+ See Documentation/infiniband/ipoib.txt for more information
+
+config INFINIBAND_IPOIB_CM
+ bool "IP-over-InfiniBand Connected Mode support"
+ depends on INFINIBAND_IPOIB
+ default n
+ ---help---
+ This option enables support for IPoIB connected mode. After
+ enabling this option, you need to switch to connected mode
+ through /sys/class/net/ibXXX/mode to actually create
+ connections, and then increase the interface MTU with
+ e.g. ifconfig ib0 mtu 65520.
+
+ WARNING: Enabling connected mode will trigger some packet
+ drops for multicast and UD mode traffic from this interface,
+ unless you limit mtu for these destinations to 2044.
+
+config INFINIBAND_IPOIB_DEBUG
+ bool "IP-over-InfiniBand debugging" if EXPERT
+ depends on INFINIBAND_IPOIB
+ default y
+ ---help---
+ This option causes debugging code to be compiled into the
+ IPoIB driver. The output can be turned on via the
+ debug_level and mcast_debug_level module parameters (which
+ can also be set after the driver is loaded through sysfs).
+
+ This option also creates a directory tree under ipoib/ in
+ debugfs, which contains files that expose debugging
+ information about IB multicast groups used by the IPoIB
+ driver.
+
+config INFINIBAND_IPOIB_DEBUG_DATA
+ bool "IP-over-InfiniBand data path debugging"
+ depends on INFINIBAND_IPOIB_DEBUG
+ ---help---
+ This option compiles debugging code into the data path
+ of the IPoIB driver. The output can be turned on via the
+ data_debug_level module parameter; however, even with output
+ turned off, this debugging code will have some performance
+ impact.