1 files changed, 607 insertions, 324 deletions

diff --git a/drivers/input/joystick/xpad.c b/drivers/input/joystick/xpad.c
index f8850f9cb..22e62056c 100644
--- a/drivers/input/joystick/xpad.c
+++ b/drivers/input/joystick/xpad.c
@@ -76,10 +76,13 @@
  */
 
 #include <linux/kernel.h>
+#include <linux/input.h>
+#include <linux/rcupdate.h>
 #include <linux/slab.h>
 #include <linux/stat.h>
 #include <linux/module.h>
 #include <linux/usb/input.h>
+#include <linux/usb/quirks.h>
 
 #define DRIVER_AUTHOR "Marko Friedemann <mfr@bmx-chemnitz.de>"
 #define DRIVER_DESC "X-Box pad driver"
@@ -125,6 +128,7 @@ static const struct xpad_device {
 	{ 0x045e, 0x0289, "Microsoft X-Box pad v2 (US)", 0, XTYPE_XBOX },
 	{ 0x045e, 0x028e, "Microsoft X-Box 360 pad", 0, XTYPE_XBOX360 },
 	{ 0x045e, 0x02d1, "Microsoft X-Box One pad", 0, XTYPE_XBOXONE },
+	{ 0x045e, 0x02dd, "Microsoft X-Box One pad (Covert Forces)", 0, XTYPE_XBOXONE },
 	{ 0x045e, 0x0291, "Xbox 360 Wireless Receiver (XBOX)", MAP_DPAD_TO_BUTTONS, XTYPE_XBOX360W },
 	{ 0x045e, 0x0719, "Xbox 360 Wireless Receiver", MAP_DPAD_TO_BUTTONS, XTYPE_XBOX360W },
 	{ 0x044f, 0x0f07, "Thrustmaster, Inc. Controller", 0, XTYPE_XBOX },
@@ -204,7 +208,7 @@ static const struct xpad_device {
 	{ 0x1bad, 0xf900, "Harmonix Xbox 360 Controller", 0, XTYPE_XBOX360 },
 	{ 0x1bad, 0xf901, "Gamestop Xbox 360 Controller", 0, XTYPE_XBOX360 },
 	{ 0x1bad, 0xf903, "Tron Xbox 360 controller", 0, XTYPE_XBOX360 },
-	{ 0x24c6, 0x5000, "Razer Atrox Arcade Stick", 0, XTYPE_XBOX360 },
+	{ 0x24c6, 0x5000, "Razer Atrox Arcade Stick", MAP_TRIGGERS_TO_BUTTONS, XTYPE_XBOX360 },
 	{ 0x24c6, 0x5300, "PowerA MINI PROEX Controller", 0, XTYPE_XBOX360 },
 	{ 0x24c6, 0x5303, "Xbox Airflo wired controller", 0, XTYPE_XBOX360 },
 	{ 0x24c6, 0x5500, "Hori XBOX 360 EX 2 with Turbo", 0, XTYPE_XBOX360 },
@@ -242,7 +246,6 @@ static const signed short xpad_btn_triggers[] = {
 	-1
 };
 
-
 static const signed short xpad360_btn[] = {  /* buttons for x360 controller */
 	BTN_TL, BTN_TR,		/* Button LB/RB */
 	BTN_MODE,		/* The big X button */
@@ -317,24 +320,42 @@ static struct usb_device_id xpad_table[] = {
 
 MODULE_DEVICE_TABLE(usb, xpad_table);
 
+struct xpad_output_packet {
+	u8 data[XPAD_PKT_LEN];
+	u8 len;
+	bool pending;
+};
+
+#define XPAD_OUT_CMD_IDX	0
+#define XPAD_OUT_FF_IDX		1
+#define XPAD_OUT_LED_IDX	(1 + IS_ENABLED(CONFIG_JOYSTICK_XPAD_FF))
+#define XPAD_NUM_OUT_PACKETS	(1 + \
+				 IS_ENABLED(CONFIG_JOYSTICK_XPAD_FF) + \
+				 IS_ENABLED(CONFIG_JOYSTICK_XPAD_LEDS))
+
 struct usb_xpad {
 	struct input_dev *dev;		/* input device interface */
+	struct input_dev __rcu *x360w_dev;
 	struct usb_device *udev;	/* usb device */
 	struct usb_interface *intf;	/* usb interface */
 
-	int pad_present;
+	bool pad_present;
+	bool input_created;
 
 	struct urb *irq_in;		/* urb for interrupt in report */
 	unsigned char *idata;		/* input data */
 	dma_addr_t idata_dma;
 
-	struct urb *bulk_out;
-	unsigned char *bdata;
-
 	struct urb *irq_out;		/* urb for interrupt out report */
+	struct usb_anchor irq_out_anchor;
+	bool irq_out_active;		/* we must not use an active URB */
+	u8 odata_serial;		/* serial number for xbox one protocol */
 	unsigned char *odata;		/* output data */
 	dma_addr_t odata_dma;
-	struct mutex odata_mutex;
+	spinlock_t odata_lock;
+
+	struct xpad_output_packet out_packets[XPAD_NUM_OUT_PACKETS];
+	int last_out_packet;
 
 #if defined(CONFIG_JOYSTICK_XPAD_LEDS)
 	struct xpad_led *led;
@@ -344,9 +365,14 @@ struct usb_xpad {
 
 	int mapping;			/* map d-pad to buttons or to axes */
 	int xtype;			/* type of xbox device */
-	unsigned long led_no;		/* led to lit on xbox360 controllers */
+	int pad_nr;			/* the order x360 pads were attached */
+	const char *name;		/* name of the device */
+	struct work_struct work;	/* init/remove device from callback */
 };
 
+static int xpad_init_input(struct usb_xpad *xpad);
+static void xpad_deinit_input(struct usb_xpad *xpad);
+
 /*
  *	xpad_process_packet
  *
@@ -356,7 +382,6 @@ struct usb_xpad {
  *	The used report descriptor was taken from ITO Takayukis website:
  *	 http://euc.jp/periphs/xbox-controller.ja.html
  */
-
 static void xpad_process_packet(struct usb_xpad *xpad, u16 cmd, unsigned char *data)
 {
 	struct input_dev *dev = xpad->dev;
@@ -427,11 +452,9 @@ static void xpad_process_packet(struct usb_xpad *xpad, u16 cmd, unsigned char *d
  *		http://www.free60.org/wiki/Gamepad
  */
 
-static void xpad360_process_packet(struct usb_xpad *xpad,
+static void xpad360_process_packet(struct usb_xpad *xpad, struct input_dev *dev,
 				   u16 cmd, unsigned char *data)
 {
-	struct input_dev *dev = xpad->dev;
-
 	/* digital pad */
 	if (xpad->mapping & MAP_DPAD_TO_BUTTONS) {
 		/* dpad as buttons (left, right, up, down) */
@@ -439,7 +462,16 @@ static void xpad360_process_packet(struct usb_xpad *xpad,
 		input_report_key(dev, BTN_TRIGGER_HAPPY2, data[2] & 0x08);
 		input_report_key(dev, BTN_TRIGGER_HAPPY3, data[2] & 0x01);
 		input_report_key(dev, BTN_TRIGGER_HAPPY4, data[2] & 0x02);
-	} else {
+	}
+
+	/*
+	 * This should be a simple else block. However historically
+	 * xbox360w has mapped DPAD to buttons while xbox360 did not. This
+	 * made no sense, but now we can not just switch back and have to
+	 * support both behaviors.
+	 */
+	if (!(xpad->mapping & MAP_DPAD_TO_BUTTONS) ||
+	    xpad->xtype == XTYPE_XBOX360W) {
 		input_report_abs(dev, ABS_HAT0X,
 				 !!(data[2] & 0x08) - !!(data[2] & 0x04));
 		input_report_abs(dev, ABS_HAT0Y,
@@ -489,7 +521,30 @@ static void xpad360_process_packet(struct usb_xpad *xpad,
 	input_sync(dev);
 }
 
-static void xpad_identify_controller(struct usb_xpad *xpad);
+static void xpad_presence_work(struct work_struct *work)
+{
+	struct usb_xpad *xpad = container_of(work, struct usb_xpad, work);
+	int error;
+
+	if (xpad->pad_present) {
+		error = xpad_init_input(xpad);
+		if (error) {
+			/* complain only, not much else we can do here */
+			dev_err(&xpad->dev->dev,
+				"unable to init device: %d\n", error);
+		} else {
+			rcu_assign_pointer(xpad->x360w_dev, xpad->dev);
+		}
+	} else {
+		RCU_INIT_POINTER(xpad->x360w_dev, NULL);
+		synchronize_rcu();
+		/*
+		 * Now that we are sure xpad360w_process_packet is not
+		 * using input device we can get rid of it.
+		 */
+		xpad_deinit_input(xpad);
+	}
+}
 
 /*
  * xpad360w_process_packet
@@ -505,28 +560,30 @@ static void xpad_identify_controller(struct usb_xpad *xpad);
  * 01.1 - Pad state (Bytes 4+) valid
  *
  */
-
 static void xpad360w_process_packet(struct usb_xpad *xpad, u16 cmd, unsigned char *data)
 {
+	struct input_dev *dev;
+	bool present;
+
 	/* Presence change */
 	if (data[0] & 0x08) {
-		if (data[1] & 0x80) {
-			xpad->pad_present = 1;
-			usb_submit_urb(xpad->bulk_out, GFP_ATOMIC);
-			/*
-			 * Light up the segment corresponding to
-			 * controller number.
-			 */
-			xpad_identify_controller(xpad);
-		} else
-			xpad->pad_present = 0;
+		present = (data[1] & 0x80) != 0;
+
+		if (xpad->pad_present != present) {
+			xpad->pad_present = present;
+			schedule_work(&xpad->work);
+		}
 	}
 
 	/* Valid pad data */
-	if (!(data[1] & 0x1))
+	if (data[1] != 0x1)
 		return;
 
-	xpad360_process_packet(xpad, cmd, &data[4]);
+	rcu_read_lock();
+	dev = rcu_dereference(xpad->x360w_dev);
+	if (dev)
+		xpad360_process_packet(xpad, dev, cmd, &data[4]);
+	rcu_read_unlock();
 }
 
 /*
@@ -655,7 +712,7 @@ static void xpad_irq_in(struct urb *urb)
 
 	switch (xpad->xtype) {
 	case XTYPE_XBOX360:
-		xpad360_process_packet(xpad, 0, xpad->idata);
+		xpad360_process_packet(xpad, xpad->dev, 0, xpad->idata);
 		break;
 	case XTYPE_XBOX360W:
 		xpad360w_process_packet(xpad, 0, xpad->idata);
@@ -674,40 +731,73 @@ exit:
 			__func__, retval);
 }
 
-static void xpad_bulk_out(struct urb *urb)
+/* Callers must hold xpad->odata_lock spinlock */
+static bool xpad_prepare_next_out_packet(struct usb_xpad *xpad)
 {
-	struct usb_xpad *xpad = urb->context;
-	struct device *dev = &xpad->intf->dev;
+	struct xpad_output_packet *pkt, *packet = NULL;
+	int i;
+
+	for (i = 0; i < XPAD_NUM_OUT_PACKETS; i++) {
+		if (++xpad->last_out_packet >= XPAD_NUM_OUT_PACKETS)
+			xpad->last_out_packet = 0;
+
+		pkt = &xpad->out_packets[xpad->last_out_packet];
+		if (pkt->pending) {
+			dev_dbg(&xpad->intf->dev,
+				"%s - found pending output packet %d\n",
+				__func__, xpad->last_out_packet);
+			packet = pkt;
+			break;
+		}
+	}
 
-	switch (urb->status) {
-	case 0:
-		/* success */
-		break;
-	case -ECONNRESET:
-	case -ENOENT:
-	case -ESHUTDOWN:
-		/* this urb is terminated, clean up */
-		dev_dbg(dev, "%s - urb shutting down with status: %d\n",
-			__func__, urb->status);
-		break;
-	default:
-		dev_dbg(dev, "%s - nonzero urb status received: %d\n",
-			__func__, urb->status);
+	if (packet) {
+		memcpy(xpad->odata, packet->data, packet->len);
+		xpad->irq_out->transfer_buffer_length = packet->len;
+		return true;
+	}
+
+	return false;
+}
+
+/* Callers must hold xpad->odata_lock spinlock */
+static int xpad_try_sending_next_out_packet(struct usb_xpad *xpad)
+{
+	int error;
+
+	if (!xpad->irq_out_active && xpad_prepare_next_out_packet(xpad)) {
+		usb_anchor_urb(xpad->irq_out, &xpad->irq_out_anchor);
+		error = usb_submit_urb(xpad->irq_out, GFP_ATOMIC);
+		if (error) {
+			dev_err(&xpad->intf->dev,
+				"%s - usb_submit_urb failed with result %d\n",
+				__func__, error);
+			usb_unanchor_urb(xpad->irq_out);
+			return -EIO;
+		}
+
+		xpad->irq_out_active = true;
 	}
+
+	return 0;
 }
 
 static void xpad_irq_out(struct urb *urb)
 {
 	struct usb_xpad *xpad = urb->context;
 	struct device *dev = &xpad->intf->dev;
-	int retval, status;
+	int status = urb->status;
+	int error;
+	unsigned long flags;
 
-	status = urb->status;
+	spin_lock_irqsave(&xpad->odata_lock, flags);
 
 	switch (status) {
 	case 0:
 		/* success */
-		return;
+		xpad->out_packets[xpad->last_out_packet].pending = false;
+		xpad->irq_out_active = xpad_prepare_next_out_packet(xpad);
+		break;
 
 	case -ECONNRESET:
 	case -ENOENT:
@@ -715,19 +805,28 @@ static void xpad_irq_out(struct urb *urb)
 		/* this urb is terminated, clean up */
 		dev_dbg(dev, "%s - urb shutting down with status: %d\n",
 			__func__, status);
-		return;
+		xpad->irq_out_active = false;
+		break;
 
 	default:
 		dev_dbg(dev, "%s - nonzero urb status received: %d\n",
 			__func__, status);
-		goto exit;
+		break;
 	}
 
-exit:
-	retval = usb_submit_urb(urb, GFP_ATOMIC);
-	if (retval)
-		dev_err(dev, "%s - usb_submit_urb failed with result %d\n",
-			__func__, retval);
+	if (xpad->irq_out_active) {
+		usb_anchor_urb(urb, &xpad->irq_out_anchor);
+		error = usb_submit_urb(urb, GFP_ATOMIC);
+		if (error) {
+			dev_err(dev,
+				"%s - usb_submit_urb failed with result %d\n",
+				__func__, error);
+			usb_unanchor_urb(urb);
+			xpad->irq_out_active = false;
+		}
+	}
+
+	spin_unlock_irqrestore(&xpad->odata_lock, flags);
 }
 
 static int xpad_init_output(struct usb_interface *intf, struct usb_xpad *xpad)
@@ -739,6 +838,8 @@ static int xpad_init_output(struct usb_interface *intf, struct usb_xpad *xpad)
 	if (xpad->xtype == XTYPE_UNKNOWN)
 		return 0;
 
+	init_usb_anchor(&xpad->irq_out_anchor);
+
 	xpad->odata = usb_alloc_coherent(xpad->udev, XPAD_PKT_LEN,
 					 GFP_KERNEL, &xpad->odata_dma);
 	if (!xpad->odata) {
@@ -746,7 +847,7 @@ static int xpad_init_output(struct usb_interface *intf, struct usb_xpad *xpad)
 		goto fail1;
 	}
 
-	mutex_init(&xpad->odata_mutex);
+	spin_lock_init(&xpad->odata_lock);
 
 	xpad->irq_out = usb_alloc_urb(0, GFP_KERNEL);
 	if (!xpad->irq_out) {
@@ -773,8 +874,14 @@ static int xpad_init_output(struct usb_interface *intf, struct usb_xpad *xpad)
 
 static void xpad_stop_output(struct usb_xpad *xpad)
 {
-	if (xpad->xtype != XTYPE_UNKNOWN)
-		usb_kill_urb(xpad->irq_out);
+	if (xpad->xtype != XTYPE_UNKNOWN) {
+		if (!usb_wait_anchor_empty_timeout(&xpad->irq_out_anchor,
+						   5000)) {
+			dev_warn(&xpad->intf->dev,
+				 "timed out waiting for output URB to complete, killing\n");
+			usb_kill_anchored_urbs(&xpad->irq_out_anchor);
+		}
+	}
 }
 
 static void xpad_deinit_output(struct usb_xpad *xpad)
@@ -786,84 +893,157 @@ static void xpad_deinit_output(struct usb_xpad *xpad)
 	}
 }
 
+static int xpad_inquiry_pad_presence(struct usb_xpad *xpad)
+{
+	struct xpad_output_packet *packet =
+			&xpad->out_packets[XPAD_OUT_CMD_IDX];
+	unsigned long flags;
+	int retval;
+
+	spin_lock_irqsave(&xpad->odata_lock, flags);
+
+	packet->data[0] = 0x08;
+	packet->data[1] = 0x00;
+	packet->data[2] = 0x0F;
+	packet->data[3] = 0xC0;
+	packet->data[4] = 0x00;
+	packet->data[5] = 0x00;
+	packet->data[6] = 0x00;
+	packet->data[7] = 0x00;
+	packet->data[8] = 0x00;
+	packet->data[9] = 0x00;
+	packet->data[10] = 0x00;
+	packet->data[11] = 0x00;
+	packet->len = 12;
+	packet->pending = true;
+
+	/* Reset the sequence so we send out presence first */
+	xpad->last_out_packet = -1;
+	retval = xpad_try_sending_next_out_packet(xpad);
+
+	spin_unlock_irqrestore(&xpad->odata_lock, flags);
+
+	return retval;
+}
+
+static int xpad_start_xbox_one(struct usb_xpad *xpad)
+{
+	struct xpad_output_packet *packet =
+			&xpad->out_packets[XPAD_OUT_CMD_IDX];
+	unsigned long flags;
+	int retval;
+
+	spin_lock_irqsave(&xpad->odata_lock, flags);
+
+	/* Xbox one controller needs to be initialized. */
+	packet->data[0] = 0x05;
+	packet->data[1] = 0x20;
+	packet->data[2] = xpad->odata_serial++; /* packet serial */
+	packet->data[3] = 0x01; /* rumble bit enable?  */
+	packet->data[4] = 0x00;
+	packet->len = 5;
+	packet->pending = true;
+
+	/* Reset the sequence so we send out start packet first */
+	xpad->last_out_packet = -1;
+	retval = xpad_try_sending_next_out_packet(xpad);
+
+	spin_unlock_irqrestore(&xpad->odata_lock, flags);
+
+	return retval;
+}
+
 #ifdef CONFIG_JOYSTICK_XPAD_FF
 static int xpad_play_effect(struct input_dev *dev, void *data, struct ff_effect *effect)
 {
 	struct usb_xpad *xpad = input_get_drvdata(dev);
+	struct xpad_output_packet *packet = &xpad->out_packets[XPAD_OUT_FF_IDX];
+	__u16 strong;
+	__u16 weak;
+	int retval;
+	unsigned long flags;
 
-	if (effect->type == FF_RUMBLE) {
-		__u16 strong = effect->u.rumble.strong_magnitude;
-		__u16 weak = effect->u.rumble.weak_magnitude;
-
-		switch (xpad->xtype) {
-
-		case XTYPE_XBOX:
-			xpad->odata[0] = 0x00;
-			xpad->odata[1] = 0x06;
-			xpad->odata[2] = 0x00;
-			xpad->odata[3] = strong / 256;	/* left actuator */
-			xpad->odata[4] = 0x00;
-			xpad->odata[5] = weak / 256;	/* right actuator */
-			xpad->irq_out->transfer_buffer_length = 6;
-
-			return usb_submit_urb(xpad->irq_out, GFP_ATOMIC);
-
-		case XTYPE_XBOX360:
-			xpad->odata[0] = 0x00;
-			xpad->odata[1] = 0x08;
-			xpad->odata[2] = 0x00;
-			xpad->odata[3] = strong / 256;  /* left actuator? */
-			xpad->odata[4] = weak / 256;	/* right actuator? */
-			xpad->odata[5] = 0x00;
-			xpad->odata[6] = 0x00;
-			xpad->odata[7] = 0x00;
-			xpad->irq_out->transfer_buffer_length = 8;
-
-			return usb_submit_urb(xpad->irq_out, GFP_ATOMIC);
-
-		case XTYPE_XBOX360W:
-			xpad->odata[0] = 0x00;
-			xpad->odata[1] = 0x01;
-			xpad->odata[2] = 0x0F;
-			xpad->odata[3] = 0xC0;
-			xpad->odata[4] = 0x00;
-			xpad->odata[5] = strong / 256;
-			xpad->odata[6] = weak / 256;
-			xpad->odata[7] = 0x00;
-			xpad->odata[8] = 0x00;
-			xpad->odata[9] = 0x00;
-			xpad->odata[10] = 0x00;
-			xpad->odata[11] = 0x00;
-			xpad->irq_out->transfer_buffer_length = 12;
-
-			return usb_submit_urb(xpad->irq_out, GFP_ATOMIC);
-
-		case XTYPE_XBOXONE:
-			xpad->odata[0] = 0x09; /* activate rumble */
-			xpad->odata[1] = 0x08;
-			xpad->odata[2] = 0x00;
-			xpad->odata[3] = 0x08; /* continuous effect */
-			xpad->odata[4] = 0x00; /* simple rumble mode */
-			xpad->odata[5] = 0x03; /* L and R actuator only */
-			xpad->odata[6] = 0x00; /* TODO: LT actuator */
-			xpad->odata[7] = 0x00; /* TODO: RT actuator */
-			xpad->odata[8] = strong / 256;	/* left actuator */
-			xpad->odata[9] = weak / 256;	/* right actuator */
-			xpad->odata[10] = 0x80;	/* length of pulse */
-			xpad->odata[11] = 0x00;	/* stop period of pulse */
-			xpad->irq_out->transfer_buffer_length = 12;
-
-			return usb_submit_urb(xpad->irq_out, GFP_ATOMIC);
-
-		default:
-			dev_dbg(&xpad->dev->dev,
-				"%s - rumble command sent to unsupported xpad type: %d\n",
-				__func__, xpad->xtype);
-			return -1;
-		}
+	if (effect->type != FF_RUMBLE)
+		return 0;
+
+	strong = effect->u.rumble.strong_magnitude;
+	weak = effect->u.rumble.weak_magnitude;
+
+	spin_lock_irqsave(&xpad->odata_lock, flags);
+
+	switch (xpad->xtype) {
+	case XTYPE_XBOX:
+		packet->data[0] = 0x00;
+		packet->data[1] = 0x06;
+		packet->data[2] = 0x00;
+		packet->data[3] = strong / 256;	/* left actuator */
+		packet->data[4] = 0x00;
+		packet->data[5] = weak / 256;	/* right actuator */
+		packet->len = 6;
+		packet->pending = true;
+		break;
+
+	case XTYPE_XBOX360:
+		packet->data[0] = 0x00;
+		packet->data[1] = 0x08;
+		packet->data[2] = 0x00;
+		packet->data[3] = strong / 256;  /* left actuator? */
+		packet->data[4] = weak / 256;	/* right actuator? */
+		packet->data[5] = 0x00;
+		packet->data[6] = 0x00;
+		packet->data[7] = 0x00;
+		packet->len = 8;
+		packet->pending = true;
+		break;
+
+	case XTYPE_XBOX360W:
+		packet->data[0] = 0x00;
+		packet->data[1] = 0x01;
+		packet->data[2] = 0x0F;
+		packet->data[3] = 0xC0;
+		packet->data[4] = 0x00;
+		packet->data[5] = strong / 256;
+		packet->data[6] = weak / 256;
+		packet->data[7] = 0x00;
+		packet->data[8] = 0x00;
+		packet->data[9] = 0x00;
+		packet->data[10] = 0x00;
+		packet->data[11] = 0x00;
+		packet->len = 12;
+		packet->pending = true;
+		break;
+
+	case XTYPE_XBOXONE:
+		packet->data[0] = 0x09; /* activate rumble */
+		packet->data[1] = 0x08;
+		packet->data[2] = xpad->odata_serial++;
+		packet->data[3] = 0x08; /* continuous effect */
+		packet->data[4] = 0x00; /* simple rumble mode */
+		packet->data[5] = 0x03; /* L and R actuator only */
+		packet->data[6] = 0x00; /* TODO: LT actuator */
+		packet->data[7] = 0x00; /* TODO: RT actuator */
+		packet->data[8] = strong / 512;	/* left actuator */
+		packet->data[9] = weak / 512;	/* right actuator */
+		packet->data[10] = 0x80;	/* length of pulse */
+		packet->data[11] = 0x00;	/* stop period of pulse */
+		packet->data[12] = 0x00;
+		packet->len = 13;
+		packet->pending = true;
+		break;
+
+	default:
+		dev_dbg(&xpad->dev->dev,
+			"%s - rumble command sent to unsupported xpad type: %d\n",
+			__func__, xpad->xtype);
+		retval = -EINVAL;
+		goto out;
 	}
 
-	return 0;
+	retval = xpad_try_sending_next_out_packet(xpad);
+
+out:
+	spin_unlock_irqrestore(&xpad->odata_lock, flags);
+	return retval;
 }
 
 static int xpad_init_ff(struct usb_xpad *xpad)
@@ -882,6 +1062,9 @@ static int xpad_init_ff(struct usb_xpad *xpad) { return 0; }
 
 #if defined(CONFIG_JOYSTICK_XPAD_LEDS)
 #include <linux/leds.h>
+#include <linux/idr.h>
+
+static DEFINE_IDA(xpad_pad_seq);
 
 struct xpad_led {
 	char name[16];
@@ -890,6 +1073,7 @@ struct xpad_led {
 };
 
 /**
+ * set the LEDs on Xbox360 / Wireless Controllers
  * @param command
  *  0: off
  *  1: all blink, then previous setting
@@ -910,42 +1094,53 @@ struct xpad_led {
  */
 static void xpad_send_led_command(struct usb_xpad *xpad, int command)
 {
+	struct xpad_output_packet *packet =
+			&xpad->out_packets[XPAD_OUT_LED_IDX];
+	unsigned long flags;
+
 	command %= 16;
 
-	mutex_lock(&xpad->odata_mutex);
+	spin_lock_irqsave(&xpad->odata_lock, flags);
 
 	switch (xpad->xtype) {
 	case XTYPE_XBOX360:
-		xpad->odata[0] = 0x01;
-		xpad->odata[1] = 0x03;
-		xpad->odata[2] = command;
-		xpad->irq_out->transfer_buffer_length = 3;
+		packet->data[0] = 0x01;
+		packet->data[1] = 0x03;
+		packet->data[2] = command;
+		packet->len = 3;
+		packet->pending = true;
 		break;
+
 	case XTYPE_XBOX360W:
-		xpad->odata[0] = 0x00;
-		xpad->odata[1] = 0x00;
-		xpad->odata[2] = 0x08;
-		xpad->odata[3] = 0x40 + command;
-		xpad->odata[4] = 0x00;
-		xpad->odata[5] = 0x00;
-		xpad->odata[6] = 0x00;
-		xpad->odata[7] = 0x00;
-		xpad->odata[8] = 0x00;
-		xpad->odata[9] = 0x00;
-		xpad->odata[10] = 0x00;
-		xpad->odata[11] = 0x00;
-		xpad->irq_out->transfer_buffer_length = 12;
+		packet->data[0] = 0x00;
+		packet->data[1] = 0x00;
+		packet->data[2] = 0x08;
+		packet->data[3] = 0x40 + command;
+		packet->data[4] = 0x00;
+		packet->data[5] = 0x00;
+		packet->data[6] = 0x00;
+		packet->data[7] = 0x00;
+		packet->data[8] = 0x00;
+		packet->data[9] = 0x00;
+		packet->data[10] = 0x00;
+		packet->data[11] = 0x00;
+		packet->len = 12;
+		packet->pending = true;
 		break;
 	}
 
-	usb_submit_urb(xpad->irq_out, GFP_KERNEL);
-	mutex_unlock(&xpad->odata_mutex);
+	xpad_try_sending_next_out_packet(xpad);
+
+	spin_unlock_irqrestore(&xpad->odata_lock, flags);
 }
 
+/*
+ * Light up the segment corresponding to the pad number on
+ * Xbox 360 Controllers.
+ */
 static void xpad_identify_controller(struct usb_xpad *xpad)
 {
-	/* Light up the segment corresponding to controller number */
-	xpad_send_led_command(xpad, (xpad->led_no % 4) + 2);
+	led_set_brightness(&xpad->led->led_cdev, (xpad->pad_nr % 4) + 2);
 }
 
 static void xpad_led_set(struct led_classdev *led_cdev,
@@ -959,7 +1154,6 @@ static void xpad_led_set(struct led_classdev *led_cdev,
 
 static int xpad_led_probe(struct usb_xpad *xpad)
 {
-	static atomic_t led_seq = ATOMIC_INIT(-1);
 	struct xpad_led *led;
 	struct led_classdev *led_cdev;
 	int error;
@@ -971,9 +1165,13 @@ static int xpad_led_probe(struct usb_xpad *xpad)
 	if (!led)
 		return -ENOMEM;
 
-	xpad->led_no = atomic_inc_return(&led_seq);
+	xpad->pad_nr = ida_simple_get(&xpad_pad_seq, 0, 0, GFP_KERNEL);
+	if (xpad->pad_nr < 0) {
+		error = xpad->pad_nr;
+		goto err_free_mem;
+	}
 
-	snprintf(led->name, sizeof(led->name), "xpad%lu", xpad->led_no);
+	snprintf(led->name, sizeof(led->name), "xpad%d", xpad->pad_nr);
 	led->xpad = xpad;
 
 	led_cdev = &led->led_cdev;
@@ -981,16 +1179,19 @@ static int xpad_led_probe(struct usb_xpad *xpad)
 	led_cdev->brightness_set = xpad_led_set;
 
 	error = led_classdev_register(&xpad->udev->dev, led_cdev);
-	if (error) {
-		kfree(led);
-		xpad->led = NULL;
-		return error;
-	}
+	if (error)
+		goto err_free_id;
 
-	/* Light up the segment corresponding to controller number */
 	xpad_identify_controller(xpad);
 
 	return 0;
+
+err_free_id:
+	ida_simple_remove(&xpad_pad_seq, xpad->pad_nr);
+err_free_mem:
+	kfree(led);
+	xpad->led = NULL;
+	return error;
 }
 
 static void xpad_led_disconnect(struct usb_xpad *xpad)
@@ -999,6 +1200,7 @@ static void xpad_led_disconnect(struct usb_xpad *xpad)
 
 	if (xpad_led) {
 		led_classdev_unregister(&xpad_led->led_cdev);
+		ida_simple_remove(&xpad_pad_seq, xpad->pad_nr);
 		kfree(xpad_led);
 	}
 }
@@ -1008,38 +1210,73 @@ static void xpad_led_disconnect(struct usb_xpad *xpad) { }
 static void xpad_identify_controller(struct usb_xpad *xpad) { }
 #endif
 
-
-static int xpad_open(struct input_dev *dev)
+static int xpad_start_input(struct usb_xpad *xpad)
 {
-	struct usb_xpad *xpad = input_get_drvdata(dev);
-
-	/* URB was submitted in probe */
-	if (xpad->xtype == XTYPE_XBOX360W)
-		return 0;
+	int error;
 
-	xpad->irq_in->dev = xpad->udev;
 	if (usb_submit_urb(xpad->irq_in, GFP_KERNEL))
 		return -EIO;
 
 	if (xpad->xtype == XTYPE_XBOXONE) {
-		/* Xbox one controller needs to be initialized. */
-		xpad->odata[0] = 0x05;
-		xpad->odata[1] = 0x20;
-		xpad->irq_out->transfer_buffer_length = 2;
-		return usb_submit_urb(xpad->irq_out, GFP_KERNEL);
+		error = xpad_start_xbox_one(xpad);
+		if (error) {
+			usb_kill_urb(xpad->irq_in);
+			return error;
+		}
 	}
 
 	return 0;
 }
 
-static void xpad_close(struct input_dev *dev)
+static void xpad_stop_input(struct usb_xpad *xpad)
 {
-	struct usb_xpad *xpad = input_get_drvdata(dev);
+	usb_kill_urb(xpad->irq_in);
+}
 
-	if (xpad->xtype != XTYPE_XBOX360W)
+static int xpad360w_start_input(struct usb_xpad *xpad)
+{
+	int error;
+
+	error = usb_submit_urb(xpad->irq_in, GFP_KERNEL);
+	if (error)
+		return -EIO;
+
+	/*
+	 * Send presence packet.
+	 * This will force the controller to resend connection packets.
+	 * This is useful in the case we activate the module after the
+	 * adapter has been plugged in, as it won't automatically
+	 * send us info about the controllers.
+	 */
+	error = xpad_inquiry_pad_presence(xpad);
+	if (error) {
 		usb_kill_urb(xpad->irq_in);
+		return error;
+	}
 
-	xpad_stop_output(xpad);
+	return 0;
+}
+
+static void xpad360w_stop_input(struct usb_xpad *xpad)
+{
+	usb_kill_urb(xpad->irq_in);
+
+	/* Make sure we are done with presence work if it was scheduled */
+	flush_work(&xpad->work);
+}
+
+static int xpad_open(struct input_dev *dev)
+{
+	struct usb_xpad *xpad = input_get_drvdata(dev);
+
+	return xpad_start_input(xpad);
+}
+
+static void xpad_close(struct input_dev *dev)
+{
+	struct usb_xpad *xpad = input_get_drvdata(dev);
+
+	xpad_stop_input(xpad);
 }
 
 static void xpad_set_up_abs(struct input_dev *input_dev, signed short abs)
@@ -1068,11 +1305,113 @@ static void xpad_set_up_abs(struct input_dev *input_dev, signed short abs)
 	}
 }
 
+static void xpad_deinit_input(struct usb_xpad *xpad)
+{
+	if (xpad->input_created) {
+		xpad->input_created = false;
+		xpad_led_disconnect(xpad);
+		input_unregister_device(xpad->dev);
+	}
+}
+
+static int xpad_init_input(struct usb_xpad *xpad)
+{
+	struct input_dev *input_dev;
+	int i, error;
+
+	input_dev = input_allocate_device();
+	if (!input_dev)
+		return -ENOMEM;
+
+	xpad->dev = input_dev;
+	input_dev->name = xpad->name;
+	input_dev->phys = xpad->phys;
+	usb_to_input_id(xpad->udev, &input_dev->id);
+	input_dev->dev.parent = &xpad->intf->dev;
+
+	input_set_drvdata(input_dev, xpad);
+
+	if (xpad->xtype != XTYPE_XBOX360W) {
+		input_dev->open = xpad_open;
+		input_dev->close = xpad_close;
+	}
+
+	__set_bit(EV_KEY, input_dev->evbit);
+
+	if (!(xpad->mapping & MAP_STICKS_TO_NULL)) {
+		__set_bit(EV_ABS, input_dev->evbit);
+		/* set up axes */
+		for (i = 0; xpad_abs[i] >= 0; i++)
+			xpad_set_up_abs(input_dev, xpad_abs[i]);
+	}
+
+	/* set up standard buttons */
+	for (i = 0; xpad_common_btn[i] >= 0; i++)
+		__set_bit(xpad_common_btn[i], input_dev->keybit);
+
+	/* set up model-specific ones */
+	if (xpad->xtype == XTYPE_XBOX360 || xpad->xtype == XTYPE_XBOX360W ||
+	    xpad->xtype == XTYPE_XBOXONE) {
+		for (i = 0; xpad360_btn[i] >= 0; i++)
+			__set_bit(xpad360_btn[i], input_dev->keybit);
+	} else {
+		for (i = 0; xpad_btn[i] >= 0; i++)
+			__set_bit(xpad_btn[i], input_dev->keybit);
+	}
+
+	if (xpad->mapping & MAP_DPAD_TO_BUTTONS) {
+		for (i = 0; xpad_btn_pad[i] >= 0; i++)
+			__set_bit(xpad_btn_pad[i], input_dev->keybit);
+	}
+
+	/*
+	 * This should be a simple else block. However historically
+	 * xbox360w has mapped DPAD to buttons while xbox360 did not. This
+	 * made no sense, but now we can not just switch back and have to
+	 * support both behaviors.
+	 */
+	if (!(xpad->mapping & MAP_DPAD_TO_BUTTONS) ||
+	    xpad->xtype == XTYPE_XBOX360W) {
+		for (i = 0; xpad_abs_pad[i] >= 0; i++)
+			xpad_set_up_abs(input_dev, xpad_abs_pad[i]);
+	}
+
+	if (xpad->mapping & MAP_TRIGGERS_TO_BUTTONS) {
+		for (i = 0; xpad_btn_triggers[i] >= 0; i++)
+			__set_bit(xpad_btn_triggers[i], input_dev->keybit);
+	} else {
+		for (i = 0; xpad_abs_triggers[i] >= 0; i++)
+			xpad_set_up_abs(input_dev, xpad_abs_triggers[i]);
+	}
+
+	error = xpad_init_ff(xpad);
+	if (error)
+		goto err_free_input;
+
+	error = xpad_led_probe(xpad);
+	if (error)
+		goto err_destroy_ff;
+
+	error = input_register_device(xpad->dev);
+	if (error)
+		goto err_disconnect_led;
+
+	xpad->input_created = true;
+	return 0;
+
+err_disconnect_led:
+	xpad_led_disconnect(xpad);
+err_destroy_ff:
+	input_ff_destroy(input_dev);
+err_free_input:
+	input_free_device(input_dev);
+	return error;
+}
+
 static int xpad_probe(struct usb_interface *intf, const struct usb_device_id *id)
 {
 	struct usb_device *udev = interface_to_usbdev(intf);
 	struct usb_xpad *xpad;
-	struct input_dev *input_dev;
 	struct usb_endpoint_descriptor *ep_irq_in;
 	int ep_irq_in_idx;
 	int i, error;
@@ -1094,29 +1433,31 @@ static int xpad_probe(struct usb_interface *intf, const struct usb_device_id *id
 	}
 
 	xpad = kzalloc(sizeof(struct usb_xpad), GFP_KERNEL);
-	input_dev = input_allocate_device();
-	if (!xpad || !input_dev) {
-		error = -ENOMEM;
-		goto fail1;
-	}
+	if (!xpad)
+		return -ENOMEM;
+
+	usb_make_path(udev, xpad->phys, sizeof(xpad->phys));
+	strlcat(xpad->phys, "/input0", sizeof(xpad->phys));
 
 	xpad->idata = usb_alloc_coherent(udev, XPAD_PKT_LEN,
 					 GFP_KERNEL, &xpad->idata_dma);
 	if (!xpad->idata) {
 		error = -ENOMEM;
-		goto fail1;
+		goto err_free_mem;
 	}
 
 	xpad->irq_in = usb_alloc_urb(0, GFP_KERNEL);
 	if (!xpad->irq_in) {
 		error = -ENOMEM;
-		goto fail2;
+		goto err_free_idata;
 	}
 
 	xpad->udev = udev;
 	xpad->intf = intf;
 	xpad->mapping = xpad_device[i].mapping;
 	xpad->xtype = xpad_device[i].xtype;
+	xpad->name = xpad_device[i].name;
+	INIT_WORK(&xpad->work, xpad_presence_work);
 
 	if (xpad->xtype == XTYPE_UNKNOWN) {
 		if (intf->cur_altsetting->desc.bInterfaceClass == USB_CLASS_VENDOR_SPEC) {
@@ -1124,8 +1465,9 @@ static int xpad_probe(struct usb_interface *intf, const struct usb_device_id *id
 				xpad->xtype = XTYPE_XBOX360W;
 			else
 				xpad->xtype = XTYPE_XBOX360;
-		} else
+		} else {
 			xpad->xtype = XTYPE_XBOX;
+		}
 
 		if (dpad_to_buttons)
 			xpad->mapping |= MAP_DPAD_TO_BUTTONS;
@@ -1135,70 +1477,9 @@ static int xpad_probe(struct usb_interface *intf, const struct usb_device_id *id
 			xpad->mapping |= MAP_STICKS_TO_NULL;
 	}
 
-	xpad->dev = input_dev;
-	usb_make_path(udev, xpad->phys, sizeof(xpad->phys));
-	strlcat(xpad->phys, "/input0", sizeof(xpad->phys));
-
-	input_dev->name = xpad_device[i].name;
-	input_dev->phys = xpad->phys;
-	usb_to_input_id(udev, &input_dev->id);
-	input_dev->dev.parent = &intf->dev;
-
-	input_set_drvdata(input_dev, xpad);
-
-	input_dev->open = xpad_open;
-	input_dev->close = xpad_close;
-
-	input_dev->evbit[0] = BIT_MASK(EV_KEY);
-
-	if (!(xpad->mapping & MAP_STICKS_TO_NULL)) {
-		input_dev->evbit[0] |= BIT_MASK(EV_ABS);
-		/* set up axes */
-		for (i = 0; xpad_abs[i] >= 0; i++)
-			xpad_set_up_abs(input_dev, xpad_abs[i]);
-	}
-
-	/* set up standard buttons */
-	for (i = 0; xpad_common_btn[i] >= 0; i++)
-		__set_bit(xpad_common_btn[i], input_dev->keybit);
-
-	/* set up model-specific ones */
-	if (xpad->xtype == XTYPE_XBOX360 || xpad->xtype == XTYPE_XBOX360W ||
-	    xpad->xtype == XTYPE_XBOXONE) {
-		for (i = 0; xpad360_btn[i] >= 0; i++)
-			__set_bit(xpad360_btn[i], input_dev->keybit);
-	} else {
-		for (i = 0; xpad_btn[i] >= 0; i++)
-			__set_bit(xpad_btn[i], input_dev->keybit);
-	}
-
-	if (xpad->mapping & MAP_DPAD_TO_BUTTONS) {
-		for (i = 0; xpad_btn_pad[i] >= 0; i++)
-			__set_bit(xpad_btn_pad[i], input_dev->keybit);
-	} else {
-		for (i = 0; xpad_abs_pad[i] >= 0; i++)
-			xpad_set_up_abs(input_dev, xpad_abs_pad[i]);
-	}
-
-	if (xpad->mapping & MAP_TRIGGERS_TO_BUTTONS) {
-		for (i = 0; xpad_btn_triggers[i] >= 0; i++)
-			__set_bit(xpad_btn_triggers[i], input_dev->keybit);
-	} else {
-		for (i = 0; xpad_abs_triggers[i] >= 0; i++)
-			xpad_set_up_abs(input_dev, xpad_abs_triggers[i]);
-	}
-
 	error = xpad_init_output(intf, xpad);
 	if (error)
-		goto fail3;
-
-	error = xpad_init_ff(xpad);
-	if (error)
-		goto fail4;
-
-	error = xpad_led_probe(xpad);
-	if (error)
-		goto fail5;
+		goto err_free_in_urb;
 
 	/* Xbox One controller has in/out endpoints swapped. */
 	ep_irq_in_idx = xpad->xtype == XTYPE_XBOXONE ? 1 : 0;
@@ -1211,118 +1492,120 @@ static int xpad_probe(struct usb_interface *intf, const struct usb_device_id *id
 	xpad->irq_in->transfer_dma = xpad->idata_dma;
 	xpad->irq_in->transfer_flags |= URB_NO_TRANSFER_DMA_MAP;
 
-	error = input_register_device(xpad->dev);
-	if (error)
-		goto fail6;
-
 	usb_set_intfdata(intf, xpad);
 
 	if (xpad->xtype == XTYPE_XBOX360W) {
 		/*
-		 * Setup the message to set the LEDs on the
-		 * controller when it shows up
-		 */
-		xpad->bulk_out = usb_alloc_urb(0, GFP_KERNEL);
-		if (!xpad->bulk_out) {
-			error = -ENOMEM;
-			goto fail7;
-		}
-
-		xpad->bdata = kzalloc(XPAD_PKT_LEN, GFP_KERNEL);
-		if (!xpad->bdata) {
-			error = -ENOMEM;
-			goto fail8;
-		}
-
-		xpad->bdata[2] = 0x08;
-		switch (intf->cur_altsetting->desc.bInterfaceNumber) {
-		case 0:
-			xpad->bdata[3] = 0x42;
-			break;
-		case 2:
-			xpad->bdata[3] = 0x43;
-			break;
-		case 4:
-			xpad->bdata[3] = 0x44;
-			break;
-		case 6:
-			xpad->bdata[3] = 0x45;
-		}
-
-		ep_irq_in = &intf->cur_altsetting->endpoint[1].desc;
-		if (usb_endpoint_is_bulk_out(ep_irq_in)) {
-			usb_fill_bulk_urb(xpad->bulk_out, udev,
-					  usb_sndbulkpipe(udev,
-							  ep_irq_in->bEndpointAddress),
-					  xpad->bdata, XPAD_PKT_LEN,
-					  xpad_bulk_out, xpad);
-		} else {
-			usb_fill_int_urb(xpad->bulk_out, udev,
-					 usb_sndintpipe(udev,
-							ep_irq_in->bEndpointAddress),
-					 xpad->bdata, XPAD_PKT_LEN,
-					 xpad_bulk_out, xpad, 0);
-		}
-
-		/*
 		 * Submit the int URB immediately rather than waiting for open
 		 * because we get status messages from the device whether
 		 * or not any controllers are attached.  In fact, it's
 		 * exactly the message that a controller has arrived that
 		 * we're waiting for.
 		 */
-		xpad->irq_in->dev = xpad->udev;
-		error = usb_submit_urb(xpad->irq_in, GFP_KERNEL);
+		error = xpad360w_start_input(xpad);
 		if (error)
-			goto fail9;
+			goto err_deinit_output;
+		/*
+		 * Wireless controllers require RESET_RESUME to work properly
+		 * after suspend. Ideally this quirk should be in usb core
+		 * quirk list, but we have too many vendors producing these
+		 * controllers and we'd need to maintain 2 identical lists
+		 * here in this driver and in usb core.
+		 */
+		udev->quirks |= USB_QUIRK_RESET_RESUME;
+	} else {
+		error = xpad_init_input(xpad);
+		if (error)
+			goto err_deinit_output;
 	}
-
 	return 0;
 
- fail9:	kfree(xpad->bdata);
- fail8:	usb_free_urb(xpad->bulk_out);
- fail7:	input_unregister_device(input_dev);
-	input_dev = NULL;
- fail6:	xpad_led_disconnect(xpad);
- fail5:	if (input_dev)
-		input_ff_destroy(input_dev);
- fail4:	xpad_deinit_output(xpad);
- fail3:	usb_free_urb(xpad->irq_in);
- fail2:	usb_free_coherent(udev, XPAD_PKT_LEN, xpad->idata, xpad->idata_dma);
- fail1:	input_free_device(input_dev);
+err_deinit_output:
+	xpad_deinit_output(xpad);
+err_free_in_urb:
+	usb_free_urb(xpad->irq_in);
+err_free_idata:
+	usb_free_coherent(udev, XPAD_PKT_LEN, xpad->idata, xpad->idata_dma);
+err_free_mem:
 	kfree(xpad);
 	return error;
-
 }
 
 static void xpad_disconnect(struct usb_interface *intf)
 {
-	struct usb_xpad *xpad = usb_get_intfdata (intf);
+	struct usb_xpad *xpad = usb_get_intfdata(intf);
 
-	xpad_led_disconnect(xpad);
-	input_unregister_device(xpad->dev);
-	xpad_deinit_output(xpad);
+	if (xpad->xtype == XTYPE_XBOX360W)
+		xpad360w_stop_input(xpad);
 
-	if (xpad->xtype == XTYPE_XBOX360W) {
-		usb_kill_urb(xpad->bulk_out);
-		usb_free_urb(xpad->bulk_out);
-		usb_kill_urb(xpad->irq_in);
-	}
+	xpad_deinit_input(xpad);
+
+	/*
+	 * Now that both input device and LED device are gone we can
+	 * stop output URB.
+	 */
+	xpad_stop_output(xpad);
+
+	xpad_deinit_output(xpad);
 
 	usb_free_urb(xpad->irq_in);
 	usb_free_coherent(xpad->udev, XPAD_PKT_LEN,
 			xpad->idata, xpad->idata_dma);
 
-	kfree(xpad->bdata);
 	kfree(xpad);
 
 	usb_set_intfdata(intf, NULL);
 }
 
+static int xpad_suspend(struct usb_interface *intf, pm_message_t message)
+{
+	struct usb_xpad *xpad = usb_get_intfdata(intf);
+	struct input_dev *input = xpad->dev;
+
+	if (xpad->xtype == XTYPE_XBOX360W) {
+		/*
+		 * Wireless controllers always listen to input so
+		 * they are notified when controller shows up
+		 * or goes away.
+		 */
+		xpad360w_stop_input(xpad);
+	} else {
+		mutex_lock(&input->mutex);
+		if (input->users)
+			xpad_stop_input(xpad);
+		mutex_unlock(&input->mutex);
+	}
+
+	xpad_stop_output(xpad);
+
+	return 0;
+}
+
+static int xpad_resume(struct usb_interface *intf)
+{
+	struct usb_xpad *xpad = usb_get_intfdata(intf);
+	struct input_dev *input = xpad->dev;
+	int retval = 0;
+
+	if (xpad->xtype == XTYPE_XBOX360W) {
+		retval = xpad360w_start_input(xpad);
+	} else {
+		mutex_lock(&input->mutex);
+		if (input->users)
+			retval = xpad_start_input(xpad);
+		mutex_unlock(&input->mutex);
+	}
+
+	return retval;
+}
+
 static struct usb_driver xpad_driver = {
 	.name		= "xpad",
 	.probe		= xpad_probe,
 	.disconnect	= xpad_disconnect,
+	.suspend	= xpad_suspend,
+	.resume		= xpad_resume,
+	.reset_resume	= xpad_resume,
 	.id_table	= xpad_table,
 };